Bracing Systems. Available At VIKING SA Tel: (+352) Fax: (+352)

Transcription

1 Bracing Systems Available At VIKING SA Tel: (+352) Fax: (+352)

2 Bracing Systems To help ensure the availability and operation of safety systems after an earthquake event, many building and industry codes now include requirements for the design and installation of seismic sway bracing for non-structural components, such as fire sprinkler, mechanical, electrical and plumbing systems. The innovative line of CADDY Bracing Systems was developed to help keep fire sprinkler systems intact after a seismic event and to minimize water damage resulting from leaks or ruptures. CADDY Bracing Systems provide contractors with high-quality, engineered solutions, which include rigid bracing, cable bracing and rod stiffeners. Quick and easy installation Lower total installed cost Meets requirements of NFPA 13 culus Listed FM Approved OSHPD Pre-Approved Rigid Bracing Cable Bracing Branch Line Restraint System 2 Rod Stiffeners

3 Rigid Bracing The CADDY line of innovative rigid bracing products was designed to provide superior performance and meet the highest seismic load requirements. The products have been designed with the end user in mind and provide contractors with labor-saving features to promote quick and easy installation. The system of products supports lateral and longitudinal bracing and offers a wide range of structural and pipe attachments. Patent-pending lateral braces eliminate need for multiple trips up and down ladders Adjustable design can be used with different brace pipe sizes, providing flexibility on the jobsite and reducing contractor inventory Snap-off bolt head helps enable easy installation and inspection of seismic sway braces culus Listed FM Approved OSHPD Pre-Approved (OPA-2629-) to the 20 California Building Code Structural Attachments for Rigid Bracing Sway Braces 3 Replacement Nuts and Bolts for Rigid Bracing

4 Structural Attachments for Rigid Bracing Bar Joist Attachment Adjustable I-Beam Attachment Strut Seismic Hinge Universal Structural Attachment 4 Multi Attachment

5 Bar Joist Attachment Can be installed on bar joists or I-beams Thumb spring retainer allows for ease of positioning Snap-off bolt head helps enable easy installation and inspection of seismic sway braces No assembly required No loose parts Meets NFPA -13 requirements for seismic sway bracing CSBBARJEG 4354 CSBBARJHD Finish Flange Thickness FT A B C Electro-galvanized 6,4 12,7 mm 50,8 mm 76,2 mm 63,5 mm Hot-dip galvanized 6,4 12,7 mm 50,8 mm 76,2 mm 63,5 mm UL Loads Brace Direction to Structure Size Rating Parallel mm Perpendicular mm N FM Loads Horizontal Capacity per Intallation Angle from Vertical Brace Direction Size Parallel 6270 N 9385 N N N Perpendicular 77 N 7605 N 9165 N 230 N 5

6 Adjustable I-Beam Attachment No loose parts No assembly required Snap-off bolt head helps enable easy installation and inspection of seismic sway braces Meets NFPA -13 requirements for seismic sway bracing Flange Thickness FT A Height H Length L Width W CSBIB075085EG ,4 19,1 mm mm 63,5 mm 304,8 mm 69,9 mm CSBIB075145EG ,4 19,1 mm mm 63,5 mm 431,8 mm 69,9 mm CSBIB125180EG ,1 31,8 mm mm 88,9 mm 546,1 mm 79,4 mm UL Loads Brace Direction to Structure Size Rating Parallel mm Perpendicular mm N FM Loads Horizontal Capacity per Installation Angle from Vertical Brace Direction Size Parallel 7,205 N 7,605 N 4,495 N 4,9 N Perpendicular 7,205 N,230 N 12,545 N 13,965 N

7 Multi Attachment Disperses load over two anchors Minimizes the number of installed braces needed for concrete and wood structures Ideal for deck installations Use for both lateral and longitudinal sway brace applications Meets NFPA -13 requirements for seismic sway bracing Article Number Hole Size 1 HS1 Hole Size 2 HS2 A B C D UL Listed Load CSBMA050050EG ,8 mm 63,5 mm 63,5 mm 228,6 mm N CSBMA050075EG mm 304,8 mm 63,5 mm 63,5 mm 228,6 mm N Mount to structure using holes indicated in HS1. 7

8 Strut Seismic Hinge Complete hinge assembly Ideal for attaching sway bracing to MEP system supports Attaches to strut trapezes and to structure Hole Size 1 HS1 Hole Size 2 HS2 Length L Width W Thickness T CSBSH00375EG mm 179,8 mm 41,3 mm 6,4 mm CSBSH00500EG ,8 mm 41,3 mm 6,4 mm CSBSH00625EG mm 179,8 mm 41,3 mm 6,4 mm CSBSH00750EG mm 179,8 mm 41,3 mm 6,4 mm 8

9 Universal Structural Attachment Universal design allows one product to attach directly to concrete, wood, bar joist or I-beam adapters Snap-off bolt head helps enable easy installation and inspection of seismic sway braces Use for both lateral and longitudinal sway brace applications Works with 1" through 2" brace pipes and 1/4" angle iron braces to reduce inventory Center bolt does not require tightening Meets NFPA -13 requirements for seismic sway bracing Hole Size HS A B C CSBUNIV050EG ,4 mm 1,6 mm 41,4 mm CSBUNIV075EG mm 133,4 mm 1,6 mm 41,4 mm UL Loads Brace Type Size Rating Pipe 25 mm mm 13,3 N 6mm Thick Angle 25 mm mm 8,960 N FM Loads Brace Type Size Pipe Horizontal Capacity per Installation Angle from Vertical ,205 N,230 N 12,545 N 13,965 N 9

10 Shear Bolt Description CSBBARJSB50EG 2502 Shear Bolt for Bar Joist Attachment CSBIBSB50EG 2501 Shear Bolt for I-Beam Attachment CSBUNIVSB62EG 2503 Shear Bolt for Universal Sway Brace and Universal Structural Attachment Shear Nut Description CSBIBSN37EG 2500 Shear Nut for Adjustable I-Beam Attachment CSBQIKCLSN37EG 2505 Shear Nut for Quick Grip Jr. Lateral Sway Brace, mm NB/DN

11 Sway Braces Easy Universal Sway Brace Standard Universal Sway Brace Quick Grip Jr. Lateral Sway Brace Quick Grip Lateral Sway Brace Easy Universal Sway Brace Use for both lateral and longitudinal sway brace applications Unique slotted holes provide for easy slip-on installation eliminating loose hardware Snap-off bolt head helps enable easy installation and inspection of seismic sway braces Works with 1" through 2" brace pipes and 1/4" angle iron braces to reduce inventory Meets NFPA -13 requirements for seismic sway bracing Pipe Size NB/DN A B Listings Approvals CSBEZU00EG " 25 mm 174,6 mm 25,4 mm UL, FM CSBEZU0125EG /4" 32 mm 187,4 mm 25,4 mm UL, FM CSBEZU0150EG /2" mm 196,9 mm 25,4 mm UL, FM CSBEZU0200EG " 50 mm 206,4 mm 30,2 mm UL, FM CSBEZU0250EG /2" 65 mm 225,4 mm 30,2 mm CSBEZU0300EG " 80 mm 238,1 mm 30,2 mm CSBEZU00EG " 0 mm 269,9 mm 38,1 mm CSBEZU0500EG " 125 mm 308 mm 38,1 mm CSBEZU0600EG " 150 mm 346,1 mm 50,8 mm 11

12 UL Loads (Listed for Restraints) Dyna-Flow Sch Sch CSBEZU00EG CSBEZU0125EG CSBEZU0150EG UL Loads (Listed for Sway Braces) Lateral Longitudinal Dyna-Flow EZ FLOW Sch Sch CSBEZU0200EG CSBEZU0250EG CSBEZU0300EG CSBEZU00EG CSBEZU0500EG CSBEZU0600EG Dyna-Flow Mega-Flow Sch Sch 5620 N 5620 N 5620 N 5620 N 5620 N 5620 N 5620 N 5620 N 5620 N 71 N 71 N 71 N 71 N 71 N 71 N FM Loads (Lightwall, Sch and Sch s) Horizontal Capacity per Installation Angle from Vertical Lateral Longitudinal CSBEZU00EG 3825 N 5425 N 6670 N 7430 N 1735 N 2445 N 2980 N 3335 N CSBEZU0125EG 3825 N 5425 N 6670 N 7430 N 1735 N 2445 N 2980 N 3335 N CSBEZU0150EG 3825 N 5425 N 6670 N 7430 N 1735 N 2445 N 2980 N 3335 N CSBEZU0200EG 6805 N 96 N N N 2315 N 3070 N 3690 N 4136 N CSBEZU0250EG 6805 N 96 N N N 2315 N 3070 N 3690 N 4136 N CSBEZU0300EG 6805 N 96 N N N 2315 N 3070 N 3690 N 4136 N CSBEZU00EG 6985 N 9875 N 120 N N 2800 N 05 N 4895 N 5470 N CSBEZU0500EG 6985 N 9875 N 120 N N 2800 N 05 N 4895 N 5470 N CSBEZU0600EG 8805 N N N N 3245 N 4450 N 5470 N 6095 N 12

13 Standard Universal Sway Brace Use for both lateral and longitudinal sway brace applications Snap-off bolt head helps enable easy installation and inspection of seismic sway braces Works with 1" through 2" brace pipes and 1/4" angle iron braces to reduce inventory Slotted design grabs service pipe for added gripping strength Meets NFPA -13 requirements for seismic sway bracing Pipe Size NB/DN A B Listings Approvals CSBSTU00EG " 25 mm 174,6 mm 25 mm UL, FM CSBSTU0125EG /4" 32 mm 187,4 mm 25,4 mm UL, FM CSBSTU0150EG /2" mm 196,9 mm 25,4 mm UL, FM CSBSTU0200EG " 50 mm 206,4 mm 30,2 mm UL, FM CSBSTU0250EG /2" 65 mm 225,4 mm 30,2 mm CSBSTU0300EG " 80 mm 238,1 mm 30,2 mm CSBSTU00EG " 0 mm 269,9 mm 38,1 mm CSBSTU0500EG " 125 mm 308 mm 38,1 mm CSBSTU0600EG " 150 mm 346,1 mm 50,8 mm CSBSTU0800EG " 200 mm 0,1 mm 50,8 mm CSBSTU00EG 4395 " 250 mm 457,2 mm 50,8 mm CSBSTU00HD 1" 25 mm 174,6 mm 25 mm UL, FM CSBSTU0125HD 1 1/4" 32 mm 187,4 mm 25,4 mm UL, FM CSBSTU0150HD 1 1/2" mm 196,9 mm 25,4 mm UL, FM CSBSTU0200HD 2" 50 mm 206,4 mm 30,2 mm UL, FM CSBSTU0300HD 3" 80 mm 238,1 mm 30,2 mm CSBSTU00HD 4" 0 mm 269,9 mm 38,1 mm CSBSTU0500HD 5" 125 mm 308 mm 38,1 mm CSBSTU0600HD 6" 150 mm 346,1 mm 50,8 mm CSBSTU0800HD 8" 200 mm 0,1 mm 50,8 mm CSBSTU00HD " 250 mm 457,2 mm 50,8 mm Finish: Hot-dip galvanized UL Loads (Listed for Restraints) Dyna-Flow Sch Sch CSBSTU00xx CSBSTU0125xx CSBSTU0150xx 13

14 UL Loads (Listed for Sway Braces) Lateral Longitudinal Dyna-Flow EZ FLOW Sch Sch CSBSTU0200xx CSBSTU0250xx CSBSTU0300xx CSBSTU00xx CSBSTU0500xx CSBSTU0600xx CSBSTU0800xx CSBSTU00xx Dyna-Flow EZ FLOW Sch Sch FM Loads (Lightwall, Sch and Sch s) Horizontal Capacity per Installation Angle from Vertical Lateral Longitudinal CSBSTU00xx 3825 N 5425 N 6670 N 7430 N 4315 N 3200 N 3825 N 4270 N CSBSTU0125xx 3825 N 5425 N 6670 N 7430 N 4315 N 3200 N 3825 N 4270 N CSBSTU0150xx 3825 N 5425 N 6670 N 7430 N 4315 N 3200 N 3825 N 4270 N CSBSTU0200xx 6805 N 96 N N N 3870 N 3070 N 3690 N 4136 N CSBSTU0250xx 6805 N 96 N N N 3870 N 3070 N 3690 N 4136 N CSBSTU0300xx 6805 N 96 N N N 3870 N 3070 N 3690 N 4136 N CSBSTU00xx 6985 N 9875 N 120 N N 6895 N 6185 N 7475 N 8320 N CSBSTU0500xx 6985 N 9875 N 120 N N 6895 N 6185 N 7475 N 8320 N CSBSTU0600xx 8805 N N N N 65 N 5205 N 6270 N 6985 N FM Loads (4.8 mm wall and Sch s) Horizontal Capacity per Installation Angle from Vertical Lateral Longitudinal CSBSTU0800xx 9075 N N N N 53 N 7560 N 9295 N 365 N CSBSTU00xx 9075 N N N N 53 N 7560 N 9295 N 365 N 14

15 Quick Grip Jr. Lateral Sway Brace Easy two-step installation elminates extra trips between structure and service pipe Works with 1" and 1 1/4" (25 mm and 32 mm) brace pipes to reduce inventory Snap-off bolt head helps enable easy installation and inspection of seismic sway braces Meets NFPA -13 requirements for seismic sway bracing Pipe Size NB/DN Height H Width W CSBQIKCL00EG " 25 mm 130,2 mm 65,3 mm CSBQIKCL0125EG /4" 32 mm 136,5 mm 74,4 mm CSBQIKCL0150EG /2" mm 142,9 mm 80,2 mm CSBQIKCL0200EG " 50 mm 161,9 mm 92,3 mm UL Loads (Listed for Restraints) CSBQIKCL00EG CSBQIKCL0125EG CSBQIKCL0150EG CSBQIKCL0200EG Lateral Schedule 25 mm Brace Pipe 32 mm Brace Pipe Dyna-Flow Dyna-Flow 20 N 20 N 20 N Dyna-Flow 3330 N 3330 N 3330 N Dyna-Flow 3330 N 20 N 3330 N 20 N 3330 N 20 N 15

16 FM Loads Lateral Horizontal per Installation Angle from Vertical Schedule Lightwall CSBQIKCL00EG CSBQIKCL0125EG CSBQIKCL0150EG CSBQIKCL0200EG N 1830 N 2200 N 2445 N 665 N 935 N 1245 N 10 N 2115 N 2960 N 3670 N 4115 N Lightwall 1290 N 1830 N 2200 N 2445 N 665 N 935 N 1245 N 10 N 2115 N 2960 N 3670 N 4115 N Lightwall 1290 N 1830 N 2200 N 2445 N 665 N 935 N 1245 N 10 N 2115 N 2960 N 3670 N 4115 N Lightwall 1735 N 2445 N 2980 N 3335 N 1555 N 2225 N 2760 N 3070 N 2180 N 3070 N 3780 N 4225 N Quick Grip Lateral Sway Brace The Quick Grip Lateral Brace, part of the CADDY line of fire sprinkler bracing systems from ERICO, is designed to help simplify installations when bracing service pipe for seismic or other catastrophic events. It features an innovative design for quick attachment of brace pipe to service pipe saving time and money. Easy two-step installation elminates extra trips between structure and service pipe Works with 1" and 1 1/4" (25 mm and 32 mm) brace pipes to reduce inventory Yellow tips provide a visual indicator that the bolts have been properly torqued Easy installation with an impact wrench from the bottom side of the clamp Meets NFPA -13 requirements for seismic sway bracing Pipe Size NB/DN Height H Width W 65 mm 138,1 148,6 mm 172 mm CSBQG0250EG /2" CSBQG0300EG " 80 mm ,5 mm 190 mm CSBQG00EG " 0 mm 180,4 190,9 mm 222 mm CSBQG0500EG " 125 mm 205,8 217,9 mm 260 mm CSBQG0600EG " 150 mm 235,5 244,9 mm 298 mm CSBQG0800EG " 200 mm 289,2 300 mm 351,8 mm 16

17 UL Loads Lateral Schedule CSBQG0250EG CSBQG0300EG CSBQG00EG CSBQG0500EG CSBQG0600EG CSBQG0800EG 25 mm Brace Pipe 32 mm Brace Pipe Dyna-Flow Dyna-Flow Dyna-Flow Mega-Flow FM Loads Lateral CSBQG0250EG CSBQG0300EG CSBQG00EG CSBQG0500EG CSBQG0600EG CSBQG0800EG Horizontal Capacity per Installation Angle from Vertical Schedule Lightwall 6270 N 8895 N 900 N N 6270 N 8895 N 900 N N 6270 N 8895 N 900 N N Lightwall 5295 N 7475 N 9163 N 230 N 5295 N 7475 N 9163 N 230 N 5295 N 7475 N 9163 N 230 N Lightwall 5295 N 7475 N 9163 N 230 N 5295 N 7475 N 9163 N 230 N 5295 N 7475 N 9163 N 230 N Lightwall 3870 N 5470 N 6715 N 7515 N 3870 N 5470 N 6715 N 7515 N 4315 N 6095 N 7475 N 8320 N Lightwall 3870 N 5470 N 6715 N 7515 N 3870 N 5470 N 6715 N 7515 N 4315 N 6095 N 7475 N 8320 N 4.8 mm (Wall Thickness) 3515 N 49 N 6050 N 6760 N 3515 N 49 N 6050 N 6760 N 17

18 Cable Bracing CADDY cable bracing is an ideal alternative to rigid bracing for fire sprinkler systems when brace lengths greater than 19-8 (6 m) are required or when confined/crowded spaces make rigid systems difficult to install. The system includes pre-stretched steel cable, attachment fittings, crimping sleeves and related tools. The system can also be used to brace electrical, mechanical and plumbing systems. Color-coated cable conforms to NFPA 13 requirements and makes it highly visible and easier to identify cable sizes UL Listed OSHPD Pre-Approved (OPA-0619) Cable Spool Crimping Sleeve Loop Attachment Kit No Pry Clip Stake Eye Kit Cable Cutter 18

19 Swaging Tools Universal Restraint Clip Universal Restraint Clip, Retrofit Cable Spool Cut to length as needed Pre-stretched restraint cable Finish: Pre-galvanized, Painted Brace Size Diameter Cable Length UL Listed Load Color CSB12CBL 2190 #12 2,4 mm 76,2 m N Red CSB18CBL 2191 #18 3,2 mm 76,2 m N White CSB36CBL 2192 #36 4,8 mm 76,2 m N Blue CSB48CBL 2193 #48 6 mm 76,2 m N Yellow Cable is powder coated. 19

20 Crimping Sleeve Creates secure loop ends Crimp with swaging tools Material: Copper Brace Size CSB12SLVB 2194 #12 CSB18SLVB 2195 #18 CSB36SLVB 2196 #36 CSB48SLVB 2197 #48 Two side-by-side crimps required on #12 and #18 cable. Three side-by-side crimps required on #36 and #48 cable. Check crimp with gauge (not included). Loop Attachment Kit Two-way bracing kit with crimp sleeves Wraps around structural steel members Brace Size Brace Length Cable Length UL Listed Load Color CSB12B00L #12 2,1 m 3,3 m N Red CSB12B00L 2232 #12 3,0 m 4,2 m N Red CSB18B00L #18 2,1 m 3,3 m N White CSB18B00L 2233 #18 3,0 m 4,2 m N White Stake eyes not included. 20

21 No Pry Clip Eliminates prying effect on fasteners and anchors CSBNPC Brace Size Hole Size UL Listed Load #12, #18, # N Stake Eye Kit Attaches to steel, wood or concrete structures Two-way bracing kit with crimp sleeves and stake eyes Swaged-on stake eye, pre-bent to 45 degrees Article Number Brace Size Hole Size Brace Length Cable Length UL Listed Load Color CSB12BD38L #12 11 mm 2,1 m 3,3 m N Red CSB12BD38L 2221 #12 11 mm 3,0 m 4,2 m N Red CSB12BD50L #12 2,1 m 3,3 m N Red CSB12BD50L 2227 #12 3,0 m 4,2 m N Red CSB18BD38L #18 11 mm 2,1 m 3,3 m N White CSB18BD38L 2222 #18 11 mm 3,0 m 4,2 m N White CSB18BD50L #18 2,1 m 3,3 m N White CSB18BD50L 2228 #18 3,0 m 4,2 m N White CSB36BD38L #36 11 mm 2,1 m 3,3 m N Blue 21

22 Article Number Brace Size Hole Size Brace Length Cable Length UL Listed Load Color CSB36BD38L 2223 #36 11 mm 3,0 m 4,2 m N Blue CSB36BD50L #36 2,1 m 3,3 m N Blue CSB36BD50L 2229 #36 3,0 m 4,2 m N Blue Kits contain copper sleeves. 22

23 Swaging Tools Manual Swaging Tool Multi-Size Manual Swaging Tool Manual Swaging Tool Brace Size Listings CSB12SBHS 4461 #12 - CSB #48 UL 23

24 Multi-Size Manual Swaging Tool CSB3346SB Brace Size 2209 #12, #18, #36 Universal Restraint Clip Attaches cable brace to structure Brace Size Hole Size HS UL Listed Load CSBURC #12, #18, #36 11 mm N CSBURC #12, #18, # N CSBURC #12, #18, #36 17 mm N CSBURC # N CSBURC #48 17 mm N CSBURC #48 21 mm N Mount to the structure using the center hole. Loop cable through the holes in the bent tabs and crimp in place. For #48 cable, use two clips stacked together. 24

25 Universal Restraint Clip, Retrofit Slotted design ideal for attaching to existing threaded rod on trapezes Brace Size Rod Size RS CSBURCR #12, #18 M CSBURCR #12, #18 M12 CSBURCR #12, #18 M16 One fastener required for #12 cable. Two stacked fasteners required for #18 cable. 25

26 Branch Line Restraint System Traditional methods for installing branch line restraints in fire sprinkler systems are cumbersome and time-consuming. Contractors often cut (and re-cut) threaded rod to precise measurements to restrain the sprinkler pipe with a loop hanger and surge restraint. Traditional methods also commonly require five or more parts per restraint. To avoid these labor-intensive methods, ERICO has streamlined the process and developed the Branch Line Restraint System, part of the CADDY line of hanging and bracing solutions for the fire protection market. Ideal for restraining 1 (25 mm) through 2 (50 mm) branch lines, this innovative system is significantly faster and easier to install than current methods. It attaches directly to steel bar joists, I-beams or purlins, as well as concrete and wood structures. The hardware is installed with only one tool, a 5/16 (8 mm) socket drill driver, which provides significant labor savings and convenience. It features a simple, two-step installation process, allowing a time savings of up to 80% compared to other methods. Unlike most solutions that only accept 3/8 (M) threaded rod, the versatile Branch Line Restraint System features a swivel attachment that can be rotated to accept 3/8 or 1/2 (M or M12) threaded rod. This allows greater restraint distances from the pipe to structure with 1/2 (M12) threaded rod. The system meets the requirements of NFPA 13, making it ideal for new construction applications. The total system is culus Listed and FM Approved, and has been pre-approved by the state of California (OSHPD OPA-2629-). Complete restraint system is quick and easy to install Offers up to 80% time savings per branch line restraint Eliminates need to cut threaded rod to exact dimensions Works with 3/8 and 1/2 (M and M12) rod Capable of restraint distances up to (960 mm) from pipe to structure with 1/2 (M12) threaded rod Meets requirements of NFPA 13 section Branch Line Restraint Pipe Attachment Branch Line Restraint Structure Attachment to Steel Branch Line Restraint Structure Attachment to Wood/Concrete 26 Branch Line Restraint Structure Attachment to Threaded Hole

27 Branch Line Restraint Pipe Attachment Accepts 3/8 or 1/2 (M or M12) threaded rod Quick grip clamp simplifies measuring and cutting of threaded rod Works with rough-cut threaded rod and eliminates pipe-side deburring Can be installed with threaded rod above or below the service pipe Shear-off head helps ensure correct torque and simplifies inspection Article Number Pipe Size NB/DN Outer Diameter OD Rod Size RS Height H Length L Width W 169,4 mm 41,4 mm 22,2 mm CSBBRP00EG " 25 mm 33,4 mm M, M12 CSBBRP0125EG /4" 32 mm 42,2 mm M, M mm 50 mm 22,2 mm CSBBRP0150EG /2" mm 48,3 mm M, M12 208,4 mm 56,1 mm 22,2 mm CSBBRP0200EG " 50 mm 60,3 mm M, M12 2 mm 68,3 mm 22,2 mm 27

28 Branch Line Restraint Structure Attachment to Steel Swivel connector accepts 3/8 or 1/2 (M or M12) threaded rod Attaches to steel members with self-drilling/tapping screw CSBBRS1MEG Article Number 2239 Rod Size RS Flange Thickness FT Height H Length L Width W Screw Diameter Sc Screw Length L M, M12 2,7 12,7 mm 28,2 mm,4 mm 26,9 mm #12 32 mm Branch line structural attachments are for restraint only and not for the hanging of fire sprinkler piping. Branch Line Restraint Structure Attachment to Wood/Concrete Swivel connector accepts 3/8 or 1/2 (M or M12) threaded rod Attaches to wood or concrete structures CSBBRS2MEG Article Number 22 Rod Size RS Height H Length L Width W Screw Diameter Sc Screw Length L Drill Bit Size M, M12 28,2 mm,4 mm 26,9 mm 6,4 mm 45 mm 4,8 mm Branch line structural attachments are for restraint only and not for the hanging of fire sprinkler piping. 28

29 Branch Line Restraint Structure Attachment to Threaded Hole Swivel connector accepts 3/8 or 1/2 (M or M12) threaded rod Attaches to concrete anchors or structural attachments with female threads CSBBRS3MEG Article Number 2241 Rod Size RS Height H Length L Width W Screw Diameter Sc Screw Length L M, M12 28,2 mm,4 mm 26,9 mm M 19 mm Branch line structural attachments are for restraint only and not for the hanging of fire sprinkler piping. 29

30 Rod Stiffeners Pipe Rod Stiffener Pipe Rod Stiffener For use with Schedule or Schedule pipe Secures pipe to threaded rod for stiffening CSBRS Brace Pipe Size Brace NB/DN Rod Size 1" 25 mm M, M12, M16 30

31 culus is a registered certification mark of UL LLC. Dyna-Flow is a registered trademark of Allied Tube & Conduit Corporation. EZ FLOW is a trademark of Northwest Pipe Company. FM is a registered certification mark of FM Approvals LLC, LTD. NFPA is a registered trademark of National Fire Protection Association, Inc. UL is a registered certification mark of UL LLC. WARNING ERICO products shall be installed and used only as indicated in ERICO s product instruction sheets and training materials. Instruction sheets are available at and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death. WARRANTY ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT. LIMITATION OF LIABILITY ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER. Copyright 2013 ERICO International Corporation. All rights reserved. CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation. 31