1 1 4" FRAMING SYSTEM
|
|
- Juniper Terry
- 6 years ago
- Views:
Transcription
1 4" FRAMING SYSTEM A000 (4 Gauge) A00 (4 Gauge) A4000 ( Gauge) A000 (4 Gauge)... 7 Channel Nuts and Closure Strips Flat Plate Fittings Ninety Degree Fittings Z Shape Fittings Angle and Wing Shape Fittings... 7 U Shape Fittings... 7 Tubing Clips Brackets MATERIAL Unistrut channels are accurately and carefully cold formed to size from low-carbon strip steel. STEEL: PLAIN 4 Gauge (. mm), ASTM A0 SS GR Gauge (.0 mm) ASTM A008 STEEL: PRE-GALVANIZED 4 Gauge (. mm) ASTM A6 GR, Gauge (.0 mm) ASTM A6 GR Channel nuts are manufactured from mild steel bars conforming to ASTM A76, GR 0, and are case hardened. Fittings are made from hot rolled, pickled and oiled steel plate or strip and conform to ASTM A0 SS GR. Many framing channels are available in special metal on request. Consult factory for ordering information. FINISHES All channels and fittings are available in: Perma-Green III (GR), Pre-galvanized (PG), conforming to ASTM A6 GR and plain (PL). Nuts are available in plain or electro-galvanized (EG) finish. Fittings are available in Perma-Green III (GR) or plain (PL). STANDARD LENGTHS Standard lengths are 0 feet (.0M) and 0 feet (6.0M). Tolerances are: + 8" (. mm) to + " (.7 mm) to allow for cutting. Special lengths are available for a small cutting charge with a tolerance of ± 8" (.mm). THREADS All threads on the nuts and bolts are Unified and American coarse screw threads. DESIGN BOLT TORQUE DIMENSIONS Imperial dimensions are illustrated in inches. Metric dimensions are shown in parenthesis or as noted. Unless noted, all metric dimensions are in millimeters and rounded to one decimal place. LOAD DATA All beam and column load data pertains to carbon steel and stainless steel channels. Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEM- BERS 007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD. Loads are based on ksi steel cold formed to 4 ksi. APPLICATION A framing system designed for medium loads, the 4" series is especially suitable for use in the OEM, commercial and display markets. It maintains a lightness in scale and a clean line that makes it aesthetically pleasing as well as functional. 67
2 4" Framing System Pictorial Index A000 Series x 4 Ga. A00 Series x 4" 4 Ga. A000-Pg 6 A00-Pg 6 A00 A-Pg 70 A00 B-Pg 70 A00 C-Pg 70 A00-Pg 7 A0-Pg 7 A4000 Series A000 Series Channel Nuts & Closures x Ga. x " 4 Ga. A4000-Pg 7 A400-Pg 7 A000-Pg 7 A Pg 7 A Pg 76 A Pg 76 Roofwalk Metal Grating A Pg 76 A06-08-Pg 76 A80-Pg 77 A480-Pg 77 A80-Pg 77 A84-Pg 77 A84P-Pg 77 A Series Fittings A06-Pg 77 A06-Pg 77 A-Pg Pg 77 A066-Pg 77 A4-Pg 77 A06-Pg 77 A0-Pg 77 A06-Pg 77 A068-Pg 77 A6-Pg 77 A48-Pg 77 A-Pg 78 A0-Pg 78 A07-Pg 78 A08-Pg 78 A7-Pg 78 A-Pg 78 A-Pg 78 A7-Pg 78 A-Pg 78 A0-Pg 78 A40-Pg 78 A0-Pg 78 A04-Pg 78 A4-Pg 78 A404-Pg 78 A04-Pg 78 A0-Pg 7 A-Pg 7 A084-Pg 7 A4 R-L-Pg 7 A47 R-L-Pg 7 A-Pg 7 A4-Pg 7 A7-Pg 7 A047-Pg 7 Index A47-Pg 7 A4047-Pg 7 A047-Pg 7 A04-Pg 7 A608-Pg 80 A4 R-Pg 80 A4 L-Pg 80 A44 R-Pg 80 A44 L-Pg Framing System
3 A000 & A00 Channels " 6" 6" ".706".44" " Index Roofwalk Metal Grating Framing System 6
4 A000 & A00 Channels Index Roofwalk Metal Grating (.8) " (6.) (.8) (.8) (.8) (7.) " (6.) (.8) (.8) (.8).6 (.).6 (. Finishes: PL, GR, HG, PG Standard Lengths: 0' & 0'." (.8) " (6.)." (0.7) (.8).8.66 (4.) (6.) 70 Framing System
5 A00 & A0 Channels " 4" 6" 6" ".440".0" " 4" 4" Metal Grating Roofwalk Index Framing System 7
6 A00 & A0 Channels Roofwalk Metal Grating Index 7 Framing System
7 A4000 & A400 Channels 6" " 6" ".6".6" " Index Roofwalk Metal Grating Framing System 7
8 A4000 & A400 Channels Metal Grating Roofwalk Index 74 Framing System
9 A000 Channels " 6" " " 6".4"." Index Roofwalk Metal Grating Framing System 7
10 Nut Selection and Load Data LOAD LOAD LOAD Index Roofwalk Metal Grating 76 Framing System
11 Channel End Caps, Closure Strips, Flat and 0 Fittings.00" (0.) (.8) 4" (6.6) (.8) 4" " (.4) " (.4) 4 4" (08.0) 4" (46.) " (76.) 4" 4" 4 4" (08.0) 4" " 7 6" (6.) (.8) /" (4.) " (8.) (.8) 4" " (4.) Metal Grating Roofwalk Index Framing System 77
12 Ninety Degree and "Z" Shape Fittings 4" " (8.) 4 4" (08.0) " 4" " " 4" " (4.) (.8) " (6.) 4" " (8.) " (.4) 4" " (8.) " (.4) 4" " (4.) (.8) Metal Grating 4" " (8.) (.8) 6" (4.8) Hole 6" (0.6) 6" (4.) (4.) A000 (.) Thick 6" (4.8) Hole 6" (0.6) A4000 (.) Thick 6" (4.) 4" (.) 6" (4.8) Hole 6" (0.6) 6" (4.) (66.7) A000 (.) Thick Roofwalk Index 7 6" (6.) 7 (7.0) A000 (.8) 7 6" (6.) 7 (7.0) A00 4" (.) 7 6" (6.) 7 (7.0) A4000 (.) 7 (7.0) A000 " (6.) 78 Framing System
13 Angle, Wing and "U" Shape Fittings 4" (7.) A B B A 7 6" (6.) 6" (74.6) (.8) (.8) " (67.) 7 6" (6.) " 7 6" (6.) " " 7 6" (6.) 7 6" (6.) " " 7 6" 4 " (4.) (6.) 4" (8.6) (.8) 4 " (4.) A00 4" (.) A000 4 " (4.) (.) 4 " (4.) " (6.) 4" (46.) (.8) Metal Grating Roofwalk A4000 A000 A000 (.8) Index Framing System 7
14 Pipe Clips and Brackets " (.4) Index Roofwalk Metal Grating (4.) B 6" A 6" A (4.) B A " (0.8) C " (0.8) " (.4) (.) 6" (4.8) Holes " (0.) Dia. Right Right C " (76.) 6" (4.8) Holes " (0.) Dia. C (.) " (.4) (.) " (.4) C 6" (4.8) Holes " (.4) " (0.8) " (0.) Dia. Left (.) 6" (4.) B A " (76.) C Design Uniform Load (Channel Upright Listed) A Lbs (.8 kn) A Lbs (.8 kn) Safety Factor of Left C 6" (4.8) Holes " (0.8) " (0.) Dia. 6" (4.) B Design Uniform Load (Channel Upright Listed) A Lbs (.8 kn) A Lbs (.8 kn) Safety Factor of 80 Framing System
STAINLESS STEEL SHEETS
STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One
More informationMaterials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available.
Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon
More informationCARBON STEEL BARS HOT ROLLED
CARBON STEEL BARS HOT ROLLED Grade Description...3-2 Rounds...3-3 thru 3-4 Strip...3-5 Flats (A-36)...3-6 thru 3-8 (M1044)...3-9 Squares...3-9 Reinforcing Bars...3-10 Reinforcing Mesh...3-10 TOLERANCES...3-11
More informationSECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS
SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and
More informationMission Statement. State Steel strives to provide quality products and services at competitive
Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories
More informationCHANNEL HOLE PATTERNS
CANNEL OLE PATTERNS B11S TRU B56S S TPE CANNEL eight Weight B11S 12 Ga. (2.6) 3 1 /4 (82.5) 2.97 (4.42) B12S 12 Ga. (2.6) 2 7 /16 (61.9) 2.39 (3.55) B22S 12 Ga. (2.6) 1.82 (2.71) B24S 14 Ga. (1.9) 1.34
More informationFig Beam Clamp Retaining Strap (B-Line B3367)
Fig. 69 - Beam Clamp Retaining Strap (B-Line B3367) Size Range: 3 /8"-16 thru 3 /4"-10 rod 4 (101.6mm) thru 16 (406.4mm) lengths Note: longer lengths are available consult factory Material: Pre-Galvanized
More informationJ.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25
TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140
More informationMaterials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
More informationDURA-BLOK Rooftop Supports
Cooper B-Line s new line of DURA-BLOK products gives you a versatile and long-term solution for all your roof top support needs. Designed with flexibility in mind, Dura-Blok is ideal for roof top support
More informationSection 906. STRUCTURAL STEEL
906.01 Section 906. STRUCTURAL STEEL 906.01. General Requirements. Finished rolled shapes must be free from imperfections that affect strength and durability in accordance with ASTM A 6. Rolled shapes
More informationSpecifiers: Click on the icon in the WORD toolbar to reveal detailed instructions
Specifiers: Click on the icon in the WORD toolbar to reveal detailed instructions (Specifier Note: The purpose of this guide specification is to assist the specifier in correctly specifying perforated
More informationB-LINE SERIES. DURA-BLOK rooftop supports BRTS-17 DURA-BLOK. A complete rooftop support solution
DURA-BLOK rooftop supports BRTS-17 B-LINE SERIES DURA-BLOK A complete rooftop support solution DURA-BLOK rooftop solutions support DURA-BLOK supports are made of 100% recycled rubber and are designed to
More informationPart Rod Design Maximum Iron. No. Size B C Load Pipe Size Per UL Approx. Wt./100. Part Rod Design Maximum Iron
eam lamps 351L - Steel -lamp With Locknut (TOLO ig. 64) Size Range: 3 /8"-16 thru 7 /8"-9 rod Material: Steel unction: or attachment to I-beams, channels, and wide flange beams where the thickness does
More informationStructural vs Nonstructural Members. Roger LaBoube, Ph.D., P.E. Wei-Wen Yu Center for Cold-Formed Steel Structures
Structural vs Nonstructural Members Roger LaBoube, Ph.D., P.E. Wei-Wen Yu Center for Cold-Formed Steel Structures Behavior of Cold-Formed Steel Members STEEL DESIGN SPECIFICATIONS Type of steel Specification
More informationSubcommittee 3, Connections August 15, 2012
AISI Coittee on Specifications for the Design of Coittee/Subcoittee Ballot: CS11-345C Subcoittee 3, Connections August 15, 2012 SPECIFICATION E3 ed Connections The following design criteria and the requirements
More informationSECTION CLIMBING WALLS
SECTION 13120-1 PART 1 - GENERAL 1.1 SUMMARY A. This section includes the following: 1. Custom Climbing Wall. B. Related Sections 1. Section Structural Steel 2. Section Rough Carpentry 3. Finishes 1.2
More informationSeismic Restraints. Cent-R-Rail Supplement* SYSTEMS THAT MAKE SENSE
SRSCR-0 Seismic Restraints Cent-R-Rail Supplement* Multi-Directional Bracing For Data-Track, Half-Rack and Multi-Tier Half-Rack Systems Structural Engineer S 9 *To be used in conjunction with Cooper B-Line
More informationEVALUATION REPORT. PFC-5551 Reissued April 1, Filing Category: DESIGN Steel (038)
ICBO Evaluation Service, Inc. 5360 WORKMAN MILL ROAD WHITTIER, CALIFORNIA 90601-2299 A subsidiary corporation of the International Conference of Building Officials EVALUATION REPORT Copyright 2001 ICBO
More informationHigh Performance Thread Rolling Screw for Metal
High Performance Thread Rolling Screw for Metal Features / Benefits ROLOK thread rolling fasteners for metals offer a unique spiral thread form to achieve excellent drive-to-strip performance in many challenging
More informationDIVISION: METALS SECTION: METAL FABRICATIONS REPORT HOLDER: QUALITY WAY PRODUCTS, LLC 407 HADLEY STREET HOLLY, MICHIGAN 48442
0 ICC ES Report ICC ES (800) 423 6587 (562) 699 0543 www.icc es.org 000 Most Widely Accepted and Trusted ESR 1729 Reissued 10/2016 This report is subject to renewal 10/2018. DIVISION: 05 00 00 METALS SECTION:
More informationDIVISION: EARTHWORK SECTION: BORED PILES REPORT HOLDER: CANTSINK MANUFACTURING, INC. 71 FIRST AVENUE LILBURN, GEORGIA 30047
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1559 Reissued 12/2016 This report is subject to renewal 12/2018. DIVISION: 31 00
More informationD D TYPE A1, A2 & B MICHIGAN DEPARTMENT OF TRANSPORTATION 5-40 CONNECTION. L4" x 4" x 3/8" Brace. C8 x 4.25 Strut. WT9 x 17.5.
Sign length minus Adjust to avoid interference with sign legend A Deck fascia A 6" Equal Equal 6" Sign length (L) varies 6 to 12 PLAN 0 CONNECTION (DECK FASCIA) Angle connection assembly F Face of concrete
More informationThe advantages of resistance welding versus Mig welding are: Weld consistency Weld strength Floor cleanliness.
self-supported tri Flooring Systems Self-Supported TriDEK floors have a truss system that eliminates the need for floor frames or other support methods. TriDEK self-supported floors can be used to span
More informationHot Rolled. AK Steel produces Hot Rolled Steels to meet the strictest chemistry and dimensional requirements, in a wide variety of grades.
Hot Rolled STEELs P r o d u c t D ata B u l l e t i n AK Steel produces Hot Rolled Steels to meet the strictest chemistry and dimensional requirements, in a wide variety of grades. Consistency from coil
More information1. Vertical reciprocating conveyor, Hydraulic straddle VRC.
PART 1: GENERAL 1.01 Section Includes: 1. Vertical reciprocating conveyor, Hydraulic straddle VRC. a. Machine, controller, platform, structural steel hoist frame. b. Wire mesh enclosure and gates. Related
More information4Dimension strut & accessories
Strut Systems 4DS-15R 4Dimension strut & accessories Energizing a world that demands more. We deliver: Electrical solutions that use less energy, improve power reliability and make the places we live and
More informationStainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two
More informationData Center Catalog. Flexibility, Strength, and Energy Savings
Data Center Catalog Flexibility, Strength, and Energy Savings Raise your level of business with our patented, award winning, and industry leading raised access flooring systems. Helping you become LEED
More informationFig. 1 - Standard Clevis Hanger
Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension
More informationHigh Strength Epoxy Tested in Accordance with ICC-ES AC308
ADHESIVE ANCHORING SPECIALISTS DESCRIPTION/SUGGESTED SPECIFICATIONS* The 100% epoxy resin and hardener are completely mixed as they are dispensed from the dual cartridge through a static mixing nozzle,
More informationSECTION SLUICE GATES
SECTION 11100 SLUICE GATES PART 1--GENERAL Fill in the blank with a short description of sluice gate usage, i.e., for isolation of wastewater, or for tank drainage, or for control of water surface. 1.01
More informationE-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB
Waterpipe Ground Clamps Cat. No. Ground Wire Size Water Pipe Size 2-TB 1/2 in., 3/4 in., 1 or rebar 4-10 3-TB 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, 4 2-1/2 in., 3 in. or 3-1/2 in. #2 WG 5-TB 4 in., 4-1/2
More informationMASTERSPEC - SHORT FORM. B. See Division 5 Section "Metal Stairs" for steel tube railings associated with metal stairs.
SECTION 05721 - ORNAMENTAL RAILINGS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Glass supported railings. B. See Division 5 Section "Metal Stairs" for steel tube railings associated
More informationSECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]
More informationTOLCO Fire Protection Support Systems. Pipe Hangers Supports Seismic Bracing. UL Listed FM Approved for Fire Sprinkler Installations
TOLCO Fire Protection Support Systems Pipe Hangers Supports Seismic Bracing UL Listed FM Approved for Fire Sprinkler Installations Revision 12/06/2007 Catalog Forward This catalog has been created with
More informationIMAGE INDUSTRIES INC. STUD WELDING CATALOG. Attachment Systems Cold Formed Parts Assemblies
IMAGE INDUSTRIES INC. STUD WELDING CATALOG Attachment Systems Cold Formed Parts Assemblies ! WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED IN THIS CATALOG
More informationSTAINLESS STEEL STAINLESS HALF-ROUNDS STAINLESS SQUARES 303, 304/304L, 316L, 416, 17-4,
STAINLESS STEEL TECHNICAL DATA and APPLICATIONS Grade 201...9-2 Grade 303 and 303 G&P...9-3 Grade 304 and 304L...9-4 Grade 316L and 316L BSQ...9-5 Grade 410...9-6 Grade 416 and 416 PSQ...9-7 Grade 420...9-8
More informationDURA-BLOK is made from 100% recycled rubber and qualifies for LEED credits. Reflective strips on both sides allow for easy product visibility.
is made from 100% recycled rubber and qualifies for LEED credits. Reflective strips on both sides allow for easy product visibility. Channels are through bolted on all sizes for added strength and a 1
More informationHigh Strength Epoxy Tested in Accordance with ICC-ES AC308
ADHESIVE ANCHORING SPECIALISTS High Strength Epoxy Tested in Accordance with ICC-ES AC308 DESCRIPTION/SUGGESTED SPECIFICATIONS* The epoxy resin and hardener are completely mixed as they are dispensed from
More informationPIP STF05521 Details for Angle Railings for Walking and Working Surfaces
TECHNICAL CORRECTION January 2017 Structural PIP STF05521 Details for Angle Railings for Walking and Working Surfaces PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of
More informationDIVISION: EARTHWORK SECTION: BORED PILES REPORT HOLDER: GEOTECH ENTERPRISES, INC.
0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3623 Reissued 04/2017 This report is subject to renewal 04/2018. DIVISION: 31 00 00 EARTHWORK
More informationREPORT HOLDER: MITEK USA, INC. (FORMERLY USP STRUCTURAL CONNECTORS) SOUTHCROSS DRIVE, SUITE 200 BURNSVILLE, MINNESOTA EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 43 6587 (56) 699 0543 www.icc es.org ESR 3754 Reissued 09/07 This report is subject to renewal 09/09. DIVISION: 03 00 00 CONCRETE
More informationMaterials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
More informationSPECIFICATION FOR REINFORCED SOIL WALL
SPECIFICATION FOR REINFORCED SOIL WALL 1.0 EXTENT OF WORK The work shall consist of Reinforced Soil walls built in accordance with this specification and in conformity with the lines, levels and details
More informationRB WEIR GATES MODEL GENERAL DESCRIPTION DESIGN CONSTRUCTION
GENERAL DESCRIPTION The Orbinox model RB Weir Gate is designed for downward opening applications where a more accurate flow control is required. The water flows over the top of the slide permitting a constant
More informationOriginally Issued: 05/20/2013 Revised: 07/07/2017 Valid Through: 05/31/ Design
BRADY INNOVATIONS, LLC. PROX HEADER SYSTEM CSI Section: 05 05 23 Metal Fastenings 05 40 00 Cold-formed Metal Framing 1.0 RECOGNITION Brady Innovations, LLC s ProX Header System recognized in this report
More informationComponents. Jacks 2 Leg Assembly. Jacks. Typical Frame
ShorFast Components ShorFast Leg Assembly The ShorFast legs are manufactured entirely from aluminum. The body is extruded with four large keyways to accept ShorFast Frames and provides a positive rigid
More informationModel # 800SM-PS3. 8/3/2016 Page 1 of 8
Model # 800SM-PS3 8/3/2016 Page 1 of 8 /3/2016 Page 2 of 8 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL WALL PANELS REPORT HOLDER: FCP, INC.
0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2937 Reissued 05/2016 This report is subject to renewal 05/2018. DIVISION: 07 00 00 THERMAL
More informationTechnical specifications Prefab Steel Canopy
Canopy Structure: Technical specifications Prefab Steel Canopy Design fabrication and installation of pre-engineered / pre- fabricated steel canopy as per the following specification: The canopy steel
More informationDIVISION: EARTHWORK SECTION: BORED PILES REPORT HOLDER: HELICAL ANCHORS, INC BOONE AVENUE, NORTH MINNEAPOLIS, MINNESOTA 55428
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3982 Reissued 09/2017 This report is subject to renewal 09/2019. DIVISION: 31 00
More informationPRICES: DESIGN: TAXES:
CLICK HERE TO START TERMS AND CONDITIONS AGREEMENTS: All agreements are subject to strikes, accidents or other causes beyond our control. GUARANTEE: We guarantee for one year from date of delivery our
More informationAmerican Metal Specialties, Inc.
American Metal Specialties, Inc. www.cablerailings.com (253) 272-9344 (253) 627-3843 Fax PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 05 73 00 STAINLESS STEEL ORNAMENTAL HANDRAILS AND RAILINGS For best
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Steel pipe hangers and supports. 2. Metal framing systems. 3. Thermal-hanger shield inserts. 4. Fastener systems.
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this Section. 1.2 SUMMARY A. This Section includes the
More informationIntroduction Introduction
Introduction Maritime International is a leading manufacturer of marine bollards and cleats worldwide. Our range of bollards and cleats is unsurpassed by any other manufacturer or supplier. Maritime can
More informationSECTION ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING
7160 Krick Rd., Walton Hills, OH 44146 800-321-3827 - Tel 440-439-8650 - Fax 440-439-6889 SECTION 12 48 16 ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING PART 1. GENERAL 1.01 SUMMARY: This section includes
More information216 Upton Drive St. Joseph, MI Phone: [269] Fax: [269]
216 Upton Drive St. Joseph, MI 49085 CANTILEVER RACK SYSTEM Strong and durable structural steel construction No front posts unrestricted access to your product Arms adjustable on 4 centers to accommodate
More informationSECTION MECHANICAL SPECIFICATION GRIT COLLECTION EQUIPMENT
SECTION 11322 MECHANICAL SPECIFICATION GRIT COLLECTION EQUIPMENT PART 1 GENERAL 1.01 SCOPE There shall be furnished ( ) Grit Separator Mechanism(s) suitable for installation in (a) concrete tank(s) -ft.
More informationSECTION CHAIN LINK FENCES AND GATES (GALVANIZED) A. Fence framework, fabric, gates, and accessories.
SECTION 02830 CHAIN LINK FENCES AND GATES (GALVANIZED) 1.0 GENERAL 1.1 Section Includes A. Fence framework, fabric, gates, and accessories. B. Excavation for post bases; concrete footing for posts. C.
More informationMBG HEAVY DUTY METAL BAR GRATING MANUAL. MBG Metal Bar Grating Division of THE NATIONAL ASSOCIATION OF ARCHITECTURAL METAL MANUFACTURERS
AMERICAN NATIONAL STANDARD ANSI/NAAMM MBG 532 00 ANSI/NAAMM MBG 532-00 November 14, 2000 5 GRATINGS HEAVY DUTY METAL BAR GRATING MANUAL FOURTH EDITION November 14, 2000 ANSI/NAAMM MBG 532-00 5 GRATINGS
More informationSECTION METAL BUILDING SYSTEMS
SECTION 13 3419 PART 1 GENERAL 1.01 SECTION INCLUDES A. Manufacturer-engineered, shop-fabricated structural steel building frame. B. Insulated Metal wall and roof panels including gutters and downspouts.
More informationCOPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds
COPPER PRODUCTS 110 COPPER PRODUCTS Rounds... 12-2 Squares... 12-2 Flats - Square Edge...12-3 thru12-4 Flats - Full Round Edge (FRE)... 12-5 Cold Rolled Sheet... 12-6 110 Quarter Hard Copper Sheet... 12-6
More informationDIVISION: CONCRETE SECTION: CONCRETE ANCHORS DIVISION: METALS SECTION: POST-INSTALLED CONCRETE ANCHORS
0 Most Widely Accepted and Trusted ICC-ES Listing Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ELC-4027 Issued 07/2017 This listing is subject to renewal 07/2018. DIVISION: 03 00 00 CONCRETE
More informationPIPE. Central Texas Largest Distributor. Structural Steel, Pipe and Metal Building Components
Central Texas Largest Distributor Structural Steel, Pipe and Metal Building Components PIPE Waco Location P.O. Box 154485 913 South Loop Dr. Waco Texas 76705 Local - 254-754-2611 Bryan Location 9401 E.
More informationBulk Deformation Forming - Rolling
1 Bulk Deformation Forming - Rolling Overview - Shaping and Forming Powders Pressing SLS Special Injection Molding Firing/ Sintering 2 Raw Material Molten Material Continuous Casting/Rolling Ingot casting
More informationModel # 338S-OP. 9/30/2011 Page 1 of 13
Model # 338S-OP 9/30/2011 Page 1 of 13 9/30/2011 Page 2 of 13 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationASTM, SAE AND ISO BOLTING MATERIAL
, SAE AND ISO BOLTING MATERIAL Grade Yield SAE J429Grade 1 A307Grades A&B SAE J429Grade 2 Low or Low Carbon Low or 33,000 4 3/4 Over 3/4 to 55,000 33,000 57,000 36,000 60,000 60,000 SAE J429Grade 4 Carbon
More informationmaterial specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
More informationNotes Changed note Date. 1 (A) Changed template 09 / 07 / 2008
Revisions Notes Changed note Date 1 (A) Changed template 09 / 07 / 2008 2 Changed template. Clause 12.5.4.1 hot-rolled steel added. Clause 12.5.4.2, 12.5.2.4, 12.5.3.4, 12.5.4.4, 12.5.5.4, 12.5.6.4, 12.5.7.4
More informationBox Rail. Single Box Rail Bracket
HANGERS & RAILS Box Rail Accordion Door Hangers Max. Door Weight (SWL) 450 lbs Meets ANSI/BHMA A156.14, Grade 1. Rail is carefully formed to give an even tread to hanger wheels. Packaging: Bundled without
More informationSELF CLINCHING STAND-OFFS
SEF INING SEF INING STAND OFFS are designed to serve as spacers or distance pieces. A simple squeezing action embeds the hexagonal head into the sheet causing the displaced metal to flow into the clinching
More informationThe following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs.
The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs. I. Seamless Copper and Brass Tubing - as per ASTM and military standards,
More informationSECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationDBI-SALA Uni 8 Overhead Horizontal Lifeline Cable System SECTION HORIZONTAL FALL PROTECTION - OVERHEAD CABLE
SECTION 112429.18 - HORIZONTAL FALL PROTECTION - OVERHEAD CABLE PART 1 - GENERAL 1.1 SECTION INCLUDES A. Provide overhead horizontal cable fall protection system, including end anchors, energy absorbers,
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 17.
The following excerpt are pages from the North merican Product Technical Guide, Volume 2: nchor Fastening, Edition 17. Please refer to the publication in its entirety for complete details on this product
More informationSHEET AND COIL. 5MPage 1. 5 Sheet and Coil
SHEET AND COIL ALUMINIZED COIL AND SHEET 5-22 COLD ROLLED COIL AND SHEET General 5-11 Tolerances 5-12 to 5-14 GALVANIZED COIL AND SHEET General 5-15 Chemical Composition 5-16 Weight of Coating 5-17 Tolerances
More informationDIVISION: EARTHWORK SECTION: BORED PILES REPORT HOLDER: GOLIATHTECH INCORPORATED 175B RUE PELADEAU MAGOG, QUEBEC J1X 5G9 CANADA
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3726 Issued 10/2017 This report is subject to renewal 10/2018. DIVISION: 31 00 00
More informationSECTION ALUMINUM STORM WINDOWS
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 08 51 69.11 ALUMINUM STORM WINDOWS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Also delete any other item or paragraph not applicable
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-10 22 13 (August 2016) --------------------------- Preparing Activity: NAVFAC Superseding UFGS-10 22 13 (August 2010) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
More informationAMERICAN NATIONAL STANDARD ANSI/NAAMM STANDARD. Maximum Bearing Bar Depth / 2 (63.5 mm)
METAL BAR GRATING AMERICAN NATIONAL STANDARD ANSI/NAAMM STANDARD MBG 531-17 GRATINGS 5 ANSI/NAAMM MBG 531-17 SEPTEMBER 7, 2017 METAL BAR GRATING MANUAL EIGHTH EDITION Maximum Bearing Bar Depth... 2 1 /
More informationE-Series Steel Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 E-Series Steel Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an E-Series Gantry Crane into a competitive bid project or application.
More informationSECTION I -- IRONWORK
SECTION I -- IRONWORK CONTENTS PAGE 1. GENERAL... I-2 1.1. Introduction... I-2 2. REQUIREMENTS... I-2 2.1. General... I-2 2.2. Auxiliary Framing... I-2 2.3. High Seismic Risk Zone Requirements... I-3 2.4.
More informationBore Code 1 1/8" mm 121
/8" (2) Bore Model Number Model Number Code Leave blank if none desired D 2 X MR Metric M See pages.7,.3 &.34 Bore Code /8" 2 28.5mm 2 T Series HOW TO ORDER Sound limiters: Rod end -LF Includes PTFE. Under
More informationDexco Structural I-Beam Cantilever Racks Versatile, durable storage solutions for materials of considerable length and mass
Dexco Structural I-Beam Cantilever Racks Versatile, durable storage solutions for materials of considerable length and mass Dexco Cantilever Rack Systems offer the strength, durability and layout to store
More informationA-Series Aluminum Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 A-Series Aluminum Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an A-Series Gantry Crane into a competitive bid project or
More informationITEM 686 TRAFFIC SIGNAL POLE ASSEMBLIES (STEEL)
ITEM 686 TRAFFIC SIGNAL POLE ASSEMBLIES (STEEL) 686.1. Description. This Item shall govern for designing, fabricating, furnishing and erecting steel traffic signal pole assemblies of the various types
More informationIt is our intent to always maintain the highest level of quality metals obtainable from our mill sources.
This stock catalog contains the sizes, weights and descriptions of all standard Steel, Brass, Bronze and Dura-Bar Cast Iron items that are available from stock for immediate delivery. However, new items
More informationNorthpointe Renovation EPN #1701 F/A Project #17027 September 8, 2017
SECTION 055213 - PIPE AND TUBE RAILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationDIN 3015 CLAMPS B1-1 PN# / / ACC
DIN 0 CLAMPS DIN 0 Clamps HYDAC manufactures a complete line of hose, tube, and pipe mounting components according to the DIN 0 standard. HYDAC clamps assure a simple, reliable dampening support for lines
More informationDIVISION: EARTHWORK SECTION: BORED PILES REPORT HOLDER: IDEAL MANUFACTURING, INC. 999 PICTURE PARKWAY WEBSTER, NEW YORK 14580
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3750 Reissued 06/2017 This report is subject to renewal 06/2018. DIVISION: 31 00
More informationWWW.SAMSUNGPJS.CO.KR SAMSUNG Pipe Joint System, is a manufacturing company, specialized in metal stamping, form rolling and pipe extrusion. With more than 20 years of manufactring experience, we are able
More informationSECTION 1043 FENCE MATERIAL
SECTION 1043 FENCE MATERIAL 1043.1 Scope. This specification covers the material required in the construction of chainlink fence and woven wire fence. 1043.2 Basis of Acceptance. The basis of acceptance
More informationAC50 Silver Adhesive Anchoring System
General Information General Information AC50 Silver Adhesive Anchoring System Product Description The AC50 Sliver is a two-component, adhesive anchoring system. The system includes injection adhesive in
More informationB B B B3104 CT B3104CT CT B3104CT B3100C AS B422 Right Angle Clamp
EMPIRE ANVIL PHD BLINE 11 11B Plain Carbon Steel (1/2 24 ) 260 450 B3100 11G ElectroGalvanized (1/2 24 ) 11SS T304 Stainless (1/2 14 ) Adjustable Clevis 11GI 11GI ElectroGalvanized (1/2 12 ) 260 450 B3100
More informationModel # 158-P4. 12/12/2013 Page 1 of 11
Model # 158-P4 12/12/2013 Page 1 of 11 2/12/2013 Page 2 of 11 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationSIERRA MODEL 12 X 24 SPECIFICATIONS
SIERRA MODEL 12 X 24 SPECIFICATIONS Dimensions: Roof Dimensions 12-0 x 24-0 Column Dimensions (center to center) 9-0 x 21-0 Minimum Clearance 8-0 Shed Roof 1:12 pitch Square Feet Under Roof 288 Columns
More information1675 Locust Street Red Bud, IL Phone: Fax: WARRANTY & TERMS
Model # 349S-P6 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic coated elements. Ultra Play guarantees all
More informationSafety Barrier Solutions
S E P A R A T I N G P E O P L E F R O M H A Z A R D S Safety Barrier Solutions SOLUTIONS TO YOUR BARRIER NEEDS SIMPLE TO DESIGN AND SPECIFY UNRIVALLED TECHNICAL SUPPORT WORLDWIDE AVAILABILITY The Kee Safety
More information