Regulations Detail Sheet 1
|
|
- Oswin Willis
- 6 years ago
- Views:
Transcription
1 Electronic Copy Monarflex Geomembranes Ltd Lyon Way St Albans Herts AL4 0LB Tel: Fax: CI/SfB (21) Ln9 Agrément Certificate No 00/3668 Designated by Government to issue European Technical Approvals MONARFLEX GAS-RESISTANT DAMP-PROOF MEMBRANES Système de barrière Sperresystem Product THIS CERTIFICATE RELATES TO THE MONARFLEX GAS- RESISTANT DAMP-PROOF MEMBRANES. The membranes are for use in restricting the flow of radon, methane and carbon dioxide from landfill and naturally occurring underground gases into buildings. These Front Sheets must be read in conjunction with the accompanying Detail Sheets, which provide information specific to particular membranes. Regulations Detail Sheet 1 1 The Building Regulations 1991 (as amended) (England and Wales) The Secretary of State has agreed with the British Board of Agrément the aspects of performance to be used by the BBA in assessing the compliance of damp-proof membranes with the Building Regulations. In the opinion of the BBA, the Monarflex Gas-Resistant Damp-Proof Membranes, if used in accordance with the provisions of this Certificate, will meet or contribute to meeting the relevant requirements. Requirement: C2 Dangerous and offensive substances The membranes can contribute to a structure satisfying the requirements of this Regulation. See sections 10.1 and 10.2 of these Front Sheets. Requirement: C4 Resistance to weather and ground moisture When properly installed in a correctly designed structure, the membranes form an effective barrier to the movement of water within the floor, enabling compliance with this Requirement. See section 6.1 of these Front Sheets. Requirement: Regulation 7 Materials and workmanship The product is an acceptable material. See section 12 of these Front Sheets. Readers are advised to check the validity of this Certificate by either referring to the BBA s website ( or contacting the BBA direct (Telephone Hotline ).
2 Electronic Copy 2 The Building Standards (Scotland) Regulations 1990 (as amended) In the opinion of the BBA, the Monarflex Gas-Resistant Damp-Proof Membranes, if used in accordance with the provisions of this Certificate, will satisfy or contribute to satisfying the various Regulations and related Technical Standards as listed below. Regulation: 10 Fitness of materials Standard: B2.1 Selection and use of materials and components The product complies with this Standard. See section 12 of these Front Sheets. Regulation: 16 Preparation of sites and resistance to moisture Standard: G2.1 Preparation of a site The membranes can contribute to a structure satisfying the requirements of this Standard. See sections 10.1 and 10.2 of these Front Sheets. Regulation: 17 Preparation of sites and resistance to moisture Standard: G2.6 Resistance to moisture from the ground Standard: G3.1 Resistance to precipitation When properly installed in a correctly designed structure, the membranes form an effective barrier to the movement of water within the floor, enabling compliance with these Standards. See section 6.1 of these Front Sheets. 3 The Building Regulations (Northern Ireland) 1994 (as amended) In the opinion of the BBA, the Monarflex Gas-Resistant Damp-Proof Membranes, if used in accordance with the provisions of this Certificate, can satisfy the various Building Regulations as listed below. Regulation: B2 Fitness of materials and workmanship The product is an acceptable material. See section 12 of these Front Sheets. Regulation: C2 Preparation of site and resistance to dangerous and harmful substances The membranes can contribute to a structure satisfying the requirements of this Regulation. See sections 10.1 and 10.2 of these Front Sheets. Regulation: C5 Resistance to ground moisture and weather When properly installed in a correctly designed structure, the membranes form an effective barrier to the movement of water within the floor, enabling compliance with this Regulation. See section 6.1 of these Front Sheets. 4 Construction (Design and Management) Regulations 1994 Information in this Certificate may assist the client, planning supervisor, designer and contractors to address their obligations under these Regulations. See section: 1 Description of the relevant Detail Sheet (1.2). 2
3 Design Data 5 General 5.1 Monarflex Gas-Resistant Damp-Proof Membranes are satisfactory for use as a dpm and to restrict the ingress of radon, methane and carbon dioxide gases into buildings from landfill and naturally occurring sources. 5.2 Buildings in areas of risk from landfill gas should be constructed in accordance with BRE 211 Radon: guidance on protective measures for new dwellings and recommendations laid out in BRE Report 212 Construction of new buildings on gascontaminated land. 6 Resistance to water and water vapour 6.1 Tests confirm that the membranes and joints in the membranes, when completely consolidated, will adequately resist the passage of moisture from the ground and so meet the requirements of the national Building Regulations: England and Wales Approved Document C4, Section 3.3 Scotland Regulation 17, Standard G2.6 Northern Ireland Regulation C The membranes are impervious to water and will give a waterproof layer capable of accepting minor structural movements without damage. 7 Resistance to puncture 7.1 The membranes can be punctured by sharp objects and care should be taken in handling building materials over the exposed surface. 7.2 Provided there are no sharp objects present on the membrane surface prior to and during installation of the protective layer, the product will not be damaged by normal foot traffic. Electronic Copy 8 Compatibility with other materials The membranes contain an aluminium foil interply which may be subject to corrosion by alkaline conditions if exposure due to damage to the membranes occurs. However, under normal circumstances the membranes are compatible with other materials and products typically used in the same areas with the exception of products containing pitch. 9 Effects of temperature The membranes remain flexible and capable of being formed at the minimum recommended temperatures. 10 Resistance to underground gases 10.1 Examination of data indicates that the membranes are capable of restricting the ingress of methane and carbon dioxide gases from landfill and naturally occurring sources into the building BRE Reports 211 and 212 recommend 300 microns thick polyethylene as the minimum required thickness for a gas-resistant membrane. It is generally accepted that other materials with comparable or higher gas resistance can be suitable, provided they can withstand the construction processes. In the opinion of the BBA, the Monarflex Gas-Resistant Damp-Proof Membranes meet this criteria. 11 Maintenance and repair Damage to the dpm s can be adequately repaired by patching prior to the application of protection or backfilling. 12 Durability Artificial ageing tests indicate that a satisfactory retention of physical properties is achieved. The membranes will, in normal circumstances, remain effective against the ingress of water and water vapour and will restrict the ingress of methane and carbon dioxide during the lifetime of the building. 3
4 Conditions of Certification 13 Conditions 13.1 This Certificate: (a) relates only to the product that is described, installed, used and maintained as set out in this Certificate; (b) is granted only to the company, firm or person identified on the front cover no other company, firm or person may hold or claim any entitlement to this Certificate; (c) has to be read, considered and used as a whole document it may be misleading and will be incomplete to be selective; (d) is copyright of the BBA References in this Certificate to any Act of Parliament, Regulation made thereunder, Directive or Regulation of the European Union, Statutory Instrument, Code of Practice, British Standard, manufacturers instructions or similar publication, shall be construed as references to such publication in the form in which it was current at the date of this Certificate This Certificate will remain valid for an unlimited period provided that the product and the manufacture and/or fabricating process(es) thereof: (a) are maintained at or above the levels which have been assessed and found to be satisfactory by the BBA; Electronic Copy (b) continue to be checked by the BBA or its agents; and (c) are reviewed by the BBA as and when it considers appropriate In granting this Certificate, the BBA makes no representation as to: (a) the presence or absence of any patent or similar rights subsisting in the product or any other product; (b) the right of the Certificate holder to market, supply, install or maintain the product; and (c) the nature of individual installations of the product, including methods and workmanship Any recommendations relating to the use or installation of this product which are contained or referred to in this Certificate are the minimum standards required to be met when the product is used. They do not purport in any way to restate the requirements of the Health & Safety at Work etc Act 1974, or of any other statutory, common law or other duty which may exist at the date of this Certificate or in the future; nor is conformity with such recommendations to be taken as satisfying the requirements of the 1974 Act or of any present or future statutory, common law or other duty of care. In granting this Certificate, the BBA does not accept responsibility to any person or body for any loss or damage, including personal injury, arising as a direct or indirect result of the installation and use of this product. In the opinion of the British Board of Agrément, Monarflex Gas-Resistant Damp-Proof Membranes are fit for their intended use provided they are installed, used and maintained as set out in this Certificate. Certificate No 00/3668 is accordingly awarded to Monarflex Geomembranes Ltd. On behalf of the British Board of Agrément Date of issue: 18th February 2000 Chief Executive British Board of Agrément P O Box No 195, Bucknalls Lane Garston, Watford, Herts WD25 9BA Fax: mail@bba.star.co.uk website: For additional information about the Certificate, tel: For information about Agrément Certificate validity and scope, tel: Hotline , or check the BBA website.
5 Electronic Copy CI/SfB (21) Ln9 Monarflex Geomembranes Ltd REFLEX SUPER GAS-RESISTANT MEMBRANE Certificate No 00/3668 DETAIL SHEET 2 Product THIS DETAIL SHEET RELATES TO REFLEX SUPER GAS-RESISTANT DAMP-PROOF MEMBRANE. The membrane is for use as a damp-proof membrane and to restrict the ingress of radon, methane and carbon dioxide gases into buildings from landfill and naturally occurring sources. This Detail Sheet must be read in conjunction with the Front Sheets, which give the product s position regarding Regulations, general information relating to the product, and the Conditions of Certification. Technical Specification 1 Description 1.1 Reflex Super is a 0.4 mm thick, 7-layer polyethylene membrane incorporating encapsulated aluminium foil and a reinforcing grid. The membrane is sand-coloured and ribbed on the top and silver on the underside and has a smooth finish. 1.2 The nominal dimensions of the membrane are: thickness (mm) 0.4 width (m) 2 roll length (m) (1) 25, 50 roll weight (kg) 21, 42 weight per unit area (kgm 2 ) 0.42 (1) Pre-welded sheets are availabe to order. 1.3 Ancillary products available are: Monobond Gas Barrier Sealant Tape a double-sided tape, 70 mm wide for use of joining side and end overlaps of the membranes Monarflex self adhesive gas membrane for three dimensional sealing and patching. 1.4 Quality control checks are performed during manufacture and on the final product. Final product checks include: thickness width weight per unit area. 2 Delivery and site handling 2.1 Rolls are wrapped in clear polyethylene film, marked with a label bearing the product name, width, length and UK marketing company s address and phone number. 2.2 Rolls must be stacked on a flat surface, kept under cover and protected from mechanical damage. 2.3 Pre-welded sheets are suitably wrapped in polyethylene film and marked with a label bearing the product name, width, length and UK marketing company s address and telephone number. Design Data 3 General Reflex Super Gas-Resistant membrane is satisfactory for use as a damp-proof membrane under concrete, screed and floor slabs in accordance with CP 102 : 1973, Section 2 and to restrict the ingress of radon, methane and carbon dioxide gases into buildings from landfill and naturally occurring sources. Readers are advised to check the validity of this Detail Sheet by either referring to the BBA s website ( or contacting the BBA direct (Telephone Hotline ).
6 Installation Electronic Copy Technical Investigations 4 General 4.1 Installation of the membrane is carried out in accordance with the manufacturer s instructions, the relevant clauses of CP 102 : 1973, Section 2, BS 8102 : 1990 and BS 8000 : Part 4 : The membrane can be installed in all normal site conditions provided the air temperature is not below 12 C to prevent the risk of surface condensation. 5 Procedure 5.1 Reflex Super Membrane should be applied to surfaces that have a smooth finish, ie they should be free from voids, projections and mortar deposits. Surfaces should be dry and free from dust and frost. 5.2 Concrete surfaces should be dense. Vertical surfaces of brickwork and blockwork should be dry and rendered to provide an even surface. Brickwork or blockwork not rendered must be flush pointed to give a smooth surface without sudden changes in level. 5.3 Where the Monarflex self adhesive gas membrane is required (ie dusty or porous substrates) the surface should be primed with a Type B primer at the recommended coverage rate, and allowed to dry. Vertical surfaces must always be primed. 5.4 The membrane is rolled out, ensuring that it is properly aligned. All end and side overlaps should be a minimum of 150 mm and prepared in accordance with the manufacturer s instructions. 5.5 All joints where possible should be extrusionwelded. 5.6 The surface of the dpm to be lapped should be dry and dust free. To ensure a watertight bond, and gastight integrity, all laps and joints should be extrusion welded where possible. When using Monobond Gas Barrier Sealant Tape, the joints should be pressed down and well rolled. 5.7 All service penetrations and direction changes should be properly detailed. Service ducts should be vented to prevent the possibility of gas accumulating in confined spaces. 5.8 Any damage to the membrane must be repaired using a patch of Reflex Super Gas- Resistant Membrane welded in place, or a patch of the Monarflex self adhesive gas membrane. All patches must extend a minimum of 150 mm from the damaged area. 5.9 The membrane must extend over the footprint of the building with a stepped damp-proof course separated with a mortar joint The membrane should be covered by a screed or other protective layer as soon as possible after installation. If blockwork protection is used, care must be taken to avoid damage to the membrane during construction. 2 The following is a summary of the technical investigations carried out on Reflex Super Gas Resistant Membrane. 6 Tests The results of the tests carried out by the BBA are typical values for the materials, and summarised in Tables 1 to 3. Table 1 Physical properties general Test (units) Method* Mean results Weight per unit area Direct measurement (kgm 2 ) Water vapour permeability BS (75% RH/25 C) (gm 2 day 1 ) Water vapour resistance (MNsg 1 ) *The test documents are detailed in the Bibliography. Numbers in the table refer to sections/parts of the various documents. Table 2 Physical properties directional Test (units) Method* Mean results long (1) trans (2) Low temperature (3) MOAT 27 : flexibility ( C) Tensile strength BS 2782 : 326E (N per 25 mm): (100 mm min 1 ) unaged heat aged (4) UV ageing (5) Elongation BS 2782 : 320A (at maximum load) (%): (100 mm min 1 ) unaged heat aged (4) UV ageing (5) Nail tear at MOAT 27 : maximum load (N) unaged heat aged (4) Dimensional stability MOAT 27 : (%) unrestrained (1) Longitudinal direction. (2) Transverse direction. (3) Lowest non-crack temperature ( C). (4) Heat aged at 60 C for 56 days. (5) 100 hours UVB exposure. *The test documents are detailed in the Bibliography. Numbers in the table refer to sections/parts of the various documents. Table 3 Service performance (membranes and joints) Test (units) Method* Mean results Chisel impact: 20 C T1/13 (1) puncture, full penetration 0 C puncture, full penetration Resistance to leakage MOAT 27 : no leakage Tensile strength of joints MOAT 27 : (N per 50 mm): unaged 271 heat aged (2) 277 (1) BBA test method. (2) Heat aged at 60 C for 28 days. *The test documents are detailed in the Bibliography. Numbers in the table refer to sections/parts of the various documents.
7 7 Other investigations 7.1 The manufacturing process was examined, including the methods adopted for quality control, and details were obtained of the quality and composition of the materials used. 7.2 A site visit was conducted to assess the practicability of installation. 7.3 An evaluation was made of data on the permeability of radon, methane and carbon dioxide in relation to the product. Bibliography BS 2782 Methods of testing plastics Part 3 Mechanical properties Methods 320A to 320F : 1976(1989) Tensile strength, elongation and elastic modulus Electronic Copy BS 3177 : 1959(1997) Method for determining the permeability of water vapour of flexible sheet materials used for packaging BS 8000 Workmanship on building sites Part 4 : 1989 Code of practice for waterproofing BS 8102 : 1990 Code of practice for protection of structures against water from the ground CP 102 : 1973 Code of practice for protection of buildings against water from the ground MOAT No 27 : 1983 General Directive for the Assessment of Roof Waterproofing Systems On behalf of the British Board of Agrément Date of issue: 18th February 2000 Chief Executive 3
8 Electronic Copy British Board of Agrément P O Box No 195, Bucknalls Lane Garston, Watford, Herts WD25 9BA Fax: mail@bba.star.co.uk website: For additional information about the Certificate, tel: For information about Agrément Certificate validity and scope, tel: Hotline , or check the BBA website.
9 Electronic Copy CI/SfB (21) Ln9 Monarflex Geomembranes Ltd MONARFLEX RAC GAS-RESISTANT MEMBRANE Certificate No 00/3668 DETAIL SHEET 3 Product THIS DETAIL SHEET RELATES TO MONARFLEX RAC GAS-RESISTANT DAMP-PROOF MEMBRANE. The membrane is for use as a damp-proof membrane and to restrict the ingress of radon, methane and carbon dioxide gases into buildings from landfill and naturally occurring sources. This Detail Sheet must be read in conjunction with the Front Sheets, which give the product s position regarding Regulations, general information relating to the product, and the Conditions of Certification. Technical Specification 1 Description 1.1 Monarflex RAC Gas-Resistant Membrane is a 0.9 mm thick, 10-layer polyethylene membrane incorporating encapsulated aluminium foil and a reinforcing grid. The membrane is grey-coloured and has a smooth finish. 1.2 The nominal dimensions of the membrane are: thickness (mm) 0.9 width (m) 2 roll length (m) (1) 25 roll weight (kg) 45 weight per unit area (kgm 2 ) 0.90 (1) Pre-welded sheets are available to order. 1.3 Ancillary products available are: Monobond Gas Barrier Sealant Tape a doublesided tape, 70 mm wide for use of joining side and end overlaps of the membranes Monarflex self adhesive gas membrane for three-dimensional sealing and patching. 1.4 Quality control checks are performed during manufacture and on the final product. Final product checks include: thickness width weight per unit area. 2 Delivery and site handling 2.1 Rolls are wrapped in clear polyethylene film, marked with a label bearing the product name, width, length and UK marketing company s address and phone number. 2.2 Rolls must be stacked on a flat surface, kept under cover and protected from mechanical damage. 2.3 Pre-welded sheets are suitably wrapped in polyethylene film and marked with a label bearing the product name, width, length and UK marketing company s address and telephone number. Design Data 3 General Monarflex RAC Gas-Resistant Membrane is satisfactory for use as a damp-proof membrane under concrete, screed and floor slabs in accordance with CP 102 : 1973, Section 2 and to restrict the ingress of radon, methane and carbon dioxide gases into buildings from landfill and naturally occurring sources. Readers are advised to check the validity of this Detail Sheet by either referring to the BBA s website ( or contacting the BBA direct (Telephone Hotline ).
10 Installation Electronic Copy Technical Investigations 4 General 4.1 Installation of the membrane is carried out in accordance with the manufacturer s instructions, the relevant clauses of CP 102 : 1973, Section 2, BS 8102 : 1990 and BS 8000 : Part 4 : The membrane can be installed in all normal site conditions provided the air temperature is not below 12 C to prevent the risk of surface condensation. 5 Procedure 5.1 Monarflex RAC Gas-Resistant Membrane should be applied to surfaces that have a smooth finish, ie they should be free from voids, projections and mortar deposits. Surfaces should be dry and free from dust and frost. 5.2 Concrete surfaces should be dense. Vertical surfaces of brickwork and blockwork should be dry and rendered to provide an even surface. Brickwork or blockwork not rendered must be flush pointed to give a smooth surface without sudden changes in level. 5.3 Where the Monarflex self adhesive gas membrane is required (ie dusty or porous substrates) the surface should be primed with a Type B primer at the recommended coverage rate, and allowed to dry. Vertical surfaces must always be primed. 5.4 The membrane is rolled out, ensuring that it is properly aligned. All end and side overlaps should be a minimum of 150 mm and prepared in accordance with the manufacturer s instructions. 5.5 All joints where possible should be extrusionwelded. 5.6 The surface of the dpm to be lapped should be dry and dust free. To ensure a watertight bond, and gastight integrity, all laps and joints should be extrusion welded where possible. When using Monobond Gas Barrier Sealant Tape, the joints should be pressed down and well rolled. 5.7 All service penetrations and direction changes should be properly detailed. Service ducts should be vented to prevent the possibility of gas accumulating in confined spaces. 5.8 Any damage to the membrane must be repaired by using a patch of RAC Gas-Resistant Membrane and welded in place, or a patch of Monarflex self adhesive gas-membrane. All patches must extend a minimum of 150 mm from the damaged area. 5.9 The membrane must extend over the footprint of the building with a stepped damp-proof course separated with a mortar joint The membrane should be covered by a screed or other protective layer as soon as possible after installation. If blockwork protection is used, care must be taken to avoid damage to the membrane during construction. 2 The following is a summary of the technical investigations carried out on Monarflex RAC Gas- Resistant Membrane. 6 Tests The results of the tests carried out by the BBA are typical values for the materials, and summarised in Tables 1 to 3. Table 1 Physical properties general Test (units) Method* Mean results Weight per unit area Direct measurement (kgm 2 ) Water vapour permeability BS (75% RH/25 C) (gm 2 day 1 ) Water vapour resistance (MNsg 1 ) *The test documents are detailed in the Bibliography. Numbers in the table refer to sections/parts of the various documents. Table 2 Physical properties directional Test (units) Method* Mean results long (1) trans (2) Low temperature (3) MOAT 27 : flexibility ( C) Tensile strength BS 2782 : 326E (N per 25 mm): (100 mm min 1 ) unaged Change in tensile strength (%) heat aged (4) 5 5 UV ageing (5) 2 4 Elongation BS 2782 : 320A (at maximum load) (%): (100 mm min 1 ) unaged Change in elongation (%) heat aged (4) UV ageing (5) Nail tear at MOAT 27 : maximum load (N): unaged heat aged (4) 8 3 Dimensional stability MOAT 27 : (%) unrestrained (1) Longitudinal direction. (2) Transverse direction. (3) Lowest non-crack temperature ( C). (4) Heat aged at 60 C for 56 days. (5) 100 hours UVB exposure. *The test documents are detailed in the Bibliography. Numbers in the table refer to sections/parts of the various documents. Table 3 Service performance (membranes and joints) Test (units) Method* Mean results Chisel impact: 20 C T1/13 (1) severe indentation 0 C severe indentation Tensile strength of joints MOAT 27 : (N per 50 mm): unaged 333 (1) BBA test method *The test documents are detailed in the Bibliography. Numbers in the table refer to sections/parts of the various documents.
11 7 Other investigations 7.1 The manufacturing process was examined, including the methods adopted for quality control, and details were obtained of the quality and composition of the materials used. 7.2 A site visit was conducted to assess the practicability of installation. 7.3 An evaluation was made of data on the permeability of radon, methane, and carbon dioxide in relation to the product. Bibliography BS 2782 Methods of testing plastics Part 3 Mechanical properties Methods 320A to 320F : 1976(1989) Tensile strength, elongation and elastic modulus Electronic Copy BS 3177 : 1959(1997) Method for determining the permeability of water vapour of flexible sheet materials used for packaging BS 8000 Workmanship on building sites Part 4 : 1989 Code of practice for waterproofing BS 8102 : 1990 Code of practice for protection of structures against water from the ground CP 102 : 1973 Code of practice for protection of buildings against water from the ground MOAT No 27 : 1983 General Directive for the Assessment of Roof Waterproofing Systems On behalf of the British Board of Agrément Date of issue: 18th February 2000 Chief Executive 3
12 Electronic Copy British Board of Agrément P O Box No 195, Bucknalls Lane Garston, Watford, Herts WD25 9BA Fax: mail@bba.star.co.uk website: For additional information about the Certificate, tel: For information about Agrément Certificate validity and scope, tel: Hotline , or check the BBA website.
Agrément Certificate 12/4912 website: Product Sheet 2 JUTA GAS-RESISTANT MEMBRANE JUTA GP2 GAS BARRIER
Juta a.s. Dukelska 417 544 15 Dvur Kralove n.l Czech Republic Tel: 00 42 0499 314211 Fax: 00 42 0499 314210 Agrément Certificate e-mail: juta@juta.cz 12/4912 website: www.juta.cz Product Sheet 2 This Agrément
More informationAgrément Certificate 13/5069 website: Product Sheet 1
British Polythene Limited t/a Visqueen Building Products Heanor Gate Derbyshire DE75 7RG Tel: 0333 202 6800 Fax: 0333 202 6886 Page 1 of 9 Agrément Certificate e-mail: enquiries@visqueenbuilding.co.uk
More informationSTIRLING LLOYD WATERPROOFING SYSTEMS INTEGRITANK
Stirling Lloyd Polychem Ltd Union Bank King Street Knutsford Cheshire WA16 6EF Tel: 01565 633111 Fax: 01565 633555 e-mail: info@stirlinglloyd.com website: www.stirlinglloyd.com APPROVAL INSPECTION TESTING
More informationVISQUEEN WATERPROOFING MEMBRANES VISQUEEN GAS RESISTANT SELF ADHESIVE MEMBRANE
Visqueen Building Products Heanor Gate Heanor Derbyshire DE75 7RG Tel: 0333 202 6800 Fax: 0333 202 6886 e-mail: enquiries@visqueenbuilding.co.uk website: www.visqueenbuilding.co.uk APPROVAL INSPECTION
More informationRADBAR DAMP-PROOF COURSES RADBAR HIGH PERFORMANCE DAMP-PROOF COURSE
Capital Valley Plastics Ltd Cwmavon Works Cwmavon Nr Pontypool Gwent NP4 8UW Tel: 01495 772255 Fax: 01495 772251 e-mail: sales@capitalvalleyplastics.com website: www.capitalvalleyplastics.com APPROVAL
More informationBAKOR HOT-APPLIED MONOLITHIC STRUCTURAL WATERPROOFING SYSTEM BAKOR EV HOT-APPLIED MONOLITHIC MEMBRANE DAMP-PROOFING SYSTEM
APPROVAL INSPECTION TESTING CERTIFICATION Bauder Ltd 70 Landseer Road Ipswich Suffolk IP3 1DH Tel: 01473 257671 Fax: 01473 230761 TECHNICAL APPROVALS FOR CONSTRUCTION Agrément Certificate 06/4350 e-mail:
More informationRIW LIQUID-APPLIED WATERPROOFING SYSTEMS
RIW Ltd Arc House Terrace Road South Binfield Bracknell Berkshire RG42 4PZ Tel: 01344 397777 Fax: 01344 862010 e-mail: technical@riw.co.uk website: www.riw.co.uk APPROVAL INSPECTION TESTING CERTIFICATION
More informationGENERAL MEMBRANE ROOF WATERPROOFING MEMBRANES PHOENIX STAR AND PHOENIX STAR MINERAL ROOF WATERPROOFING MEMBRANES
General Membrane SpA Via Venezia 28 30022 Ceggia (VE) Italy Tel: 00 39 0421 322000 Fax: 00 39 0421 322800 e-mail: info@generalmembrane.it website: generalmembrane.it APPROVAL INSPECTION TESTING CERTIFICATION
More informationKINGSPAN NILVENT ROOF TILE UNDERLAYS FOR USE IN WARM NON-VENTILATED OR COLD VENTILATED ROOF SYSTEMS
Kingspan Insulation Ltd Torvale Industrial Estate Pembridge, Leominster Herefordshire HR6 9LA Tel: 0870 850 8555 Fax: 0870 850 8666 e-mail: info.uk@insulation.kingspan.com website: www.insulation.kingspan.com
More informationFILON GRP VALLEY TROUGH AND FLASHINGS RANGE FILON GRP DRY FIX BONDING STRIP (GDFBS 70 AND GDFBS 110)
Filon Products Limited Unit 3 Ring Road, Zone 2 Burntwood Business Park Burntwood Staffordshire WS7 2JQ Tel: 01543 687300 Fax: 01543 687303 e-mail: sales@filon.co.uk website: www.filon.co.uk APPROVAL INSPECTION
More informationFENTRIM SEALING TAPES
SIGA Cover AG Rütmattstrasse 7 Ruswil 6017 Switzerland Tel: 00 41 41 499 69 69 Agrément Certificate e-mail: siga@siga.swiss 16/5378 website: www.siga.swiss Product Sheet 1 SIGA AIR AND WEATHERTIGHTNESS
More informationCementaid (UK) Limited 2 Rutherford Way Industrial Estate Crawley West Sussex RH10 9LN Tel: Fax: website:
CI/SfB Designated by Government to issue European Technical Approvals Product Cementaid (UK) Limited 2 Rutherford Way Industrial Estate Crawley West Sussex RH10 9LN Tel: 01293 447878 Fax: 01293 447880
More informationTYVEK CONSTRUCTION MEMBRANES DUPONT AIRGUARD REFLECTIVE
DuPont de Nemours (Luxembourg) S.à r.l. Rue General Patton L-2984 Luxembourg Tel: 01275 337660 Fax: 01275 879773 e-mail: tyvek.construction@lux.dupont.com website: www.tyvekhome.com APPROVAL INSPECTION
More informationKINGSPAN THERMAROOF TR21
CI/SfB Kingspan Insulation Limited Pembridge Leominster Herefordshire HR6 9LA Tel: 0870 8508555 Fax: 0870 8508666 e-mail: info.uk@insulation.kingspan.com website: www.insulation.kingspan.com (47) Rn Agrément
More informationRESITRIX ROOF WATERPROOFING SYSTEMS RESITRIX SK W WATERPROOFING SYSTEM
Phoenix Dichtungstechnik GmbH Eisenacher Landstrasse 70 D-99880 Walterhaussen Germany Tel: 00 49 40 7667 2807 Fax: 00 49 40 7667 2949 website: www.pdt-waterproofing.com APPROVAL INSPECTION TESTING CERTIFICATION
More informationPRODUCT SHEET 1 KRYSTOL INTERNAL MEMBRANE HS (KIM-HS)
CI/SfB Yu2 Kryton International Inc 1645 East Kent Avenue Vancouver British Columbia Canada V5P 2S8 Tel: 00 1 604 324 8280 Fax: 00 1 604 324 8899 e-mail: info@kryton.com website: www.kryton.com Agrément
More informationAgrément Certificate 17/5450 website: Product Sheet 1 FOSROC HYDRO-EXPANSIVE WATERSTOPS SUPERCAST SW
Fosroc Limited Drayton Manor Business Park Coleshill Road Tamworth Staffordshire B78 3XN Tel: 01827 262222 Fax: 01827 262444 Agrément Certificate e-mail: enquiryuk@fosroc.com 17/5450 website: www.fosroc.com
More informationTYVEK ROOF LINING SYSTEMS PRODUCT SHEET 2 TYVEK SUPRO ROOF TILE UNDERLAY FOR USE IN ENERGY EFFICIENT COLD NON-VENTILATED ROOFS
DuPont de Nemours (Luxembourg) S.à r.l. Rue General Patton L-2984 Luxembourg Tel: 01275 879770 Fax: 01275 879773 e-mail: tyvek.construction@lux.dupont.com website: www.tyvekhome.com Agrément Certificate
More informationXYPEX ADMIX C-1000 NF Additif pour béton imperméable Beimischung zur Beton Wasserdichtung. Regulations
Fullstop Technology Limited Caidan House Canal Road Timperley Cheshire WA14 1TE Tel: 0161-962 8093 Fax: 0161-905 1436 e-mail: xypexfullstop@aol.com website: www.xypex.com CI/SfB Yu2 Agrément Certificate
More information26 Visqueen 100% Recycled Ecomembrane 28 Visqueen DPM To Pifa Standard PROOF. membranes
26 Visqueen 100% Recycled Ecomembrane 28 Visqueen DPM To Pifa Standard DAMP PROOF membranes Visqueen Ecomembrane is a BRE certified DPM manufactured from 100% recycled polythene. This ensures valuable
More informationPRODUCT SHEET 1 KINGSPAN KOOLTHERM K3 FLOORBOARD
Kingspan Insulation Ltd Pembridge Leominster Herefordshire HR6 4LA Tel: 0870 8508555 Fax: 0870 8508666 e-mail: info.uk@insulation.kingspan.com website: www.insulation.kingspan.com Agrément Certificate
More informationCARPENTER LOFT INSULATION EASY LOFT FOR LOFT APPLICATIONS
Carpenter Ltd Dinting Lodge Industrial Estate Glossop Derbyshire SK13 6LE Tel: 01457 861141 Fax: 01457 892424 e-mail: sales.uk@carpenter.com website: www.carpenter.com APPROVAL INSPECTION TESTING CERTIFICATION
More informationXYPEX WATERTIGHT CONCRETE SYSTEM XYPEX ADMIX C-1000 NF
Xypex (UK) LLP Unit 7 Britannia Business Centre Britannia Way Malvern Worcestershire WR14 1GZ Tel: 01684 577756 Fax: 01684 897750 e-mail: adamtrow@xypexuk.com website: www.xypex.com APPROVAL INSPECTION
More informationKINGSPAN THERMAFLOOR TF73 Isolation en polystyrène pour planchers en béton Wärmedämmung aus Polystyrol für Betonfußboden
Designated by Government to issue European Technical Approvals Product Kingspan Insulation Ltd Pembridge Leominster Herefordshire HR6 9LA Tel: 01544 388601 Fax: 01544 388888 e-mail: info.uk@insulation.kingspan.com
More informationAgrément Certificate 17/5420 Product Sheet 1 ULTRA LIQUID POLYMERS ROOF WATERPROOFING SYSTEMS
Ultra Liquid Polymers Ltd 39 Everton Road Birkdale Merseyside PR8 4BT Tel: +44 (0) 3304 004457 Fax: +44 (0) 3304 004458 Agrément Certificate e-mail: info@ultra-polymers.com 17/5420 Product Sheet 1 ULTRA
More informationTYVEK CONSTRUCTION MEMBRANES TYVEK REFLEX INSULATING BREATHER MEMBRANE
DuPont de Nemours (Luxembourg) S.à r.l. Rue General Patton L-2984 Luxembourg Tel: 01275 337660 Fax: 01275 879773 e-mail: tyvek.construction@lux.dupont.com website: www.tyvekhome.com APPROVAL INSPECTION
More informationWAVIN ROAD GULLIES. Date of First issue: 16 April 2014 Brian Chamberlain Claire Curtis-Thomas
HAPAS Wavin Ltd Parsonage Way Chippenham Wiltshire SN15 5PN Tel: 01249 766600 Fax: 01249 443286 e-mail: info@wavin.co.uk website: www.wavin.co.uk WAVIN ROAD GULLIES APPROVAL INSPECTION TESTING CERTIFICATION
More informationTIMBERWISE DAMP-PROOF SYSTEMS DRIWISE
Timberwise (UK) Ltd 1 Drake Mews Gadbrook Way Gadbrook Park Cheshire CW9 7XF Tel: 01606 333636 Fax: 01606 334748 e-mail: hq@timberwise.co.uk website: www.timberwise.co.uk APPROVAL INSPECTION TESTING CERTIFICATION
More informationFILON GRP VALLEY TROUGH AND FLASHINGS RANGE FILON GRP DRY FIX VALLEY TROUGHS (GDFVT 70 AND GDFVT 110)
Filon Products Limited Unit 3 Ring Road, Zone 2 Burntwood Business Park Burntwood Staffordshire WS7 2JQ Tel: 01543 687300 Fax: 01543 687303 e-mail: sales@filon.co.uk website: www.filon.co.uk APPROVAL INSPECTION
More informationTRUSTSEAL HIGH-FRICTION SURFACING SYSTEM KEYGRIP EPOXY 924
HAPAS Roads and Bridges Trustseal Ltd Unit 10 Southfield Industrial Estate Southfield Lane Whitwell, Worksop Nottinghamshire S80 4NW Tel: 01909 722662 Fax: 01909 720228 e-mail: info@trustseal.co.uk website:
More informationPERMAROOF 500 LIQUID ROOF SYSTEM
Permaroof UK Ltd Unit 1, Westway Cotes Park Industrial Estate Alfreton Derbyshire DE55 4QJ Tel: 0800 161 3722 Fax: 01773 608 408 Agrément Certificate e-mail: sales@permaroof.co.uk 16/5372 website: www.permaroof.co.uk
More informationRIW SHEETSEAL GR BENEFITS APPLICATIONS APPLIED TO
CI/SfB TN6 LI4143 August 2017 RIW SHEETSEAL GR is a cold applied, high density polyethylene film bonded to aluminium foil and coated with a bitumen/rubber self adhesive layer with a removable reinforced
More informationPERMO AIR LR AIR OPEN ROOFING MEMBRANE FOR USE IN WARM NON-VENTILATED PITCHED ROOF SYSTEMS
Klober Ltd Unit 6F, East Midlands Distribution Centre Short Lane Castle Donington Derbyshire DE74 2HA Tel: 01332 813050 Fax: 01332 814033 e-mail: support@klober.co.uk website: www.klober.co.uk APPROVAL
More informationPITTSBURGH CORNING (UK) PERINSUL HL PERINSUL HL
Pittsburgh Corning (UK) Ltd 31-35 Kirby Street Hatton Garden London EC1N 8TE Tel: 020 7492 1731 Fax: 020 7492 1730 e-mail: info@foamglas.co.uk website: www.foamglas.co.uk APPROVAL INSPECTION TESTING CERTIFICATION
More informationRECTICEL INSULATION EUROTHANE LIQUID ROOFING INSULATION BOARD
Recticel Insulation Products (a division of Recticel Ltd) Enterprise Way Meir Park Stoke on Trent Staffordshire ST3 7UN Tel: 01782 590470 Fax: 01782 590497 e-mail: technicalservices@recticel.com website:
More informationSIKA HYDROPHILIC WATERSTOPS SIKASWELL A2010
Sika Ltd Watchmead Welwyn Garden City Hertfordshire AL7 1BQ Tel: 01707 394444 Fax: 01707 329129 e-mail: technical@uk.sika.com website: www.sika.co.uk APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL
More informationCABERDEK. Date of First issue: 28 November 2008 Simon Wroe Greg Cooper
Norbord Ltd Station Road Cowie Stirling FK7 7BQ Tel: 01786 812921 Fax: 01786 817143 e-mail: info@norbord.net website: www.norbord.net APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL APPROVALS FOR CONSTRUCTION
More informationMULTIFOIL INSULATION PRODUCT SHEET 1 THINSULEX SILVER
CI/SfB Lh4 (M2) Web Dynamics Ltd Moss Lane Blackrod Bolton Lancashire BL6 5JB Tel: 01204 695666 Fax: 01204 695333 e-mail: thinsulex@webdynamics.co.uk website: www.webdynamics.co.uk Agrément Certificate
More informationHYDROSTOPEU LIQUID APPLIED ROOF WATERPROOFING SYSTEMS AH 25 LIQUID WATERPROOFING SYSTEM
KVT Dichtungssysteme GmbH Rugenbergener Strasse 2a Ellerbek 25474 Hamburg Germany Tel: 00 49 4101 383073 Fax: 00 49 4101 383074 e-mail: info@hydrostopeu.com website: www.hydrostopeu.com APPROVAL INSPECTION
More informationPUDLO CWP (CEMENT WATERPROOFING POWDER)
David Ball Group plc Huntingdon Road Bar Hill Cambridge CB3 8HN Tel: 01954 780687 Fax: 01954 782912 e-mail: sales@pudlo.com website: www.davidballgroup.com APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL
More informationWEDI SHOWER ELEMENTS WEDI FUNDO SHOWER ELEMENTS
wedi Systems (UK) Ltd Unit 4 Mercury Park Mercury Way Trafford Park Manchester M41 7LY Tel: 0161 864 2336 Fax: 0161 864 1323 e-mail: info@wedi.co.uk website: www.wedi.co.uk APPROVAL INSPECTION TESTING
More informationRESITRIX ROOF WATERPROOFING SYSTEMS
Carlisle Construction Materials GmbH Schellerdamm 18 D-21079 Hamburg Germany Tel: 00 49 40 788 933 200 Fax: 00 49 40 788 933 201 e-mail: info@ccm-europe.com website: www.ccm-europe.com APPROVAL INSPECTION
More informationDELTA MEMBRANE SYSTEMS DELTA-PT
Delta Membrane Systems Ltd Unit 7 Bassett Business Centre Hurricane Way North Weald, Epping Essex CM16 6AA Tel: 01992 523811 Fax: 01992 524046 e-mail: info@deltamembranes.com website: www.deltamembranes.com
More informationBALLYTHERM INSULATION BALLYTHERM BTR PITCHED ROOF INSULATION
Ballytherm Ltd Annagh Industrial Park Ballyconnell Co Cavan Ireland Tel: 00 353 49 9527000 Fax: 00 353 49 9527002 e-mail: info@ballytherm.ie website: www.ballytherm.ie APPROVAL INSPECTION TESTING CERTIFICATION
More informationCARLISLE SYNTEC SYSTEMS PRODUCT SHEET 1 CARLISLE SURESEAL NON-REINFORCED EPDM ROOF WATERPROOFING SYSTEMS
CI/SfB (47) Ln Carlisle Syntec Incorporated 104 High Street Tetsworth Oxfordshire OX9 7AE Tel: 01844 281643 Fax: 01844 281597 e-mail: enquires@carlisleroofing.co.uk website: www.carlisle-syntec.com Agrément
More informationCEMBRIT SLATES ZEELAND SLATES
Cembrit a.s. Lidická 302 266 38 Beroun 3 Czech Republic Tel: 00 420 311 744111 Fax: 00 420 311 744248 e-mail: info@cembrit.cz website: www.cembrit.cz APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL
More informationDELTA MEMBRANE SYSTEMS DELTA-MS500
Delta Membrane Systems Ltd Delta House Merlin Way North Weald, Epping Essex CM16 6HR Tel: 01992 523523 Fax: 01992 523250 e-mail: info@deltamembranes.com website: www.deltamembranes.com APPROVAL INSPECTION
More informationXTRATHERM THIN-R INSULATION XTRATHERM THIN-R FLAT ROOF INSULATION BOARD (FR ALU)
Xtratherm UK Ltd Park Road Holmewood Industrial Park Holmewood Chesterfield Tel: 0371 222 1033 Fax: 0371 222 1044 e-mail: info@xtratherm.com website: www.xtratherm.com APPROVAL INSPECTION TESTING CERTIFICATION
More informationFATRA ROOF COVERING SYSTEMS FATRAFOL FF 810 AND FATRAFOL FF 810/V ROOF COVERING SYSTEMS
Fatra UK Ltd Unit 12 The Timber Yard East Moors Road Ocean Park Cardiff CF24 5EE Tel: 029 2048 7954 Fax: 029 2048 9226 e-mail: sales@fatra.co.uk website: www.fatra.co.uk APPROVAL INSPECTION TESTING CERTIFICATION
More informationEUROTHANE GP EUROTHANE GP PITCHED ROOF INSULATION
Recticel Insulation Products (a division of Recticel Ltd) Enterprise Way Meir Park Stoke on Trent Staffordshire ST3 7UN Tel: 01782 590470 Fax: 01782 590497 e-mail: technicalservices@recticel.com website:
More informationKOOLTHERM K8 CAVITY BOARD Isolant pour murs creux Kerndämmung
CI/SfB Designated by Government to issue European Technical Approvals Product Kingspan Insulation Limited Pembridge Leominster Herefordshire HR6 9LA Tel: 01544 388601 Fax: 01544 388888 e-mail: info@insulation.kingspan.com
More informationAlcan Singen GmbH D Singen Germany Tel: Fax: website:
CI/SfB (41) Rn6 Alcan Singen GmbH D-78221 Singen Germany Tel: 00 49 77 31 80 0 Fax: 00 49 77 31 80 2845 e-mail: composites@alcan.com website: www.alucobond.com Designated by Government to issue European
More informationAgrément Certificate 16/5333 website: Product Sheet 1
Icopal Limited Barton Dock Road Stretford Manchester M32 0YL Tel: 0161 865 4444 Fax: 0161 866 9859 (Marketing) 0161 865 8433 (Technical) Agrément Certificate e-mail: info.uk@icopal.com 16/5333 website:
More informationAgrément Certificate 08/4575 website: Product Sheet 1
Specialist Tiling Supplies Unit 5 Wortley Trading Estate Wortley Moor Lane Leeds West Yorkshire LS12 4HX Tel: 0113 202 2010 Fax: 0113 301 0212 Agrément Certificate e-mail: info@specialisttilingsupplies.com
More informationXTRATHERM XTROLINER (XO) XTRATHERM XTROLINER RAINSCREEN BOARD (XO/RS)
Xtratherm Ltd Liscarton Industrial Estate Kells Road Navan Co Meath Ireland Tel: 00 353 46 906 6000 Fax: 00 353 46 906 6090 e-mail: info@xtratherm.com website: www.xtratherm.com APPROVAL INSPECTION TESTING
More informationMULTIFOIL INSULATION TLX GOLD INSULATING BREATHER MEMBRANE FOR PITCHED ROOFS
TLX Insulation Ltd Moss Lane Blackrod Bolton Lancashire BL6 5JB Tel: 01204 695666 Fax: 01204 695333 e-mail: tlx@tlxinsulation.co.uk website: www.tlxinsulation.co.uk APPROVAL INSPECTION TESTING CERTIFICATION
More informationDANOSA SINGLE-PLY ROOF WATERPROOFING MEMBRANES DANOPOL FV PVC ROOF WATERPROOFING MEMBRANES
Danosa (Derivados Normalizados Asfálticos S.A) Polígono Industrial Sector 9 19290 Fontanar Guadalajara Spain Tel: 00 34 94 98 88 210 Fax: 00 34 94 98 88 223 e-mail: info@danosa.com website: www.danosa.com
More informationVITRABOND RAINSCREEN CLADDING SYSTEMS VITRABOND FR ALUMINIUM COMPOSITE RAINSCREEN CLADDING PANELS
Valcan Ltd APPROVAL INSPECTION TESTING CERTIFICATION Unit 7 Robins Drive Castlefields Industrial Estate Bridgwater Somerset TA6 4DL Tel: 01278 428 245 Fax: 01278 425 662 TECHNICAL APPROVALS FOR CONSTRUCTION
More informationDECOTHANE ROOF COATING SYSTEMS DECOTHANE GAMMA 20 ROOF COATING SYSTEM
Sika Liquid Plastics Sika House Miller Street Preston Lancashire PR1 1EA Tel: 01772 259781 Fax: 01772 255670 e-mail: liquidplastics@uk.sika.com website: www.liquidplastics.co.uk APPROVAL INSPECTION TESTING
More informationAgrément Certificate 07/4420 website: Product Sheet 2
Mercury Building Products Ltd 114 Eckington Road Coal Aston Dronfield Sheffield S18 3AY Tel: 01246 292816 Fax: 01246 292867 Agrément Certificate e-mail: sales@vapfree.co.uk; danny@vaprfree.co.uk 07/4420
More informationKINGSPAN INSULATION KOOLTHERM K15 RAINSCREEN INSULATION BOARD
Kingspan Insulation Ltd Pembridge Leominster Herefordshire HR6 9LA Tel: 0870 850 8555 Fax: 0870 850 8666 e-mail: info.uk@insulation.kingspan.com website: www.insulation.kingspan.com APPROVAL INSPECTION
More informationVisqueen Ultimate HC BLOK
Technical Product Datasheet Edition: 26/10/2017 Identification no. VBP010 Visqueen Ultimate HC BLOK The ultimate Methane & VOCs vapour barrier Conforms to CIRIA C748 and BS8485:2015 Excellent VOC (vapour)
More informationDAMP PROOF MEMBRANE 100% RECYCLED ECOMEMBRANE 41 DPM TO PIFA STANDARD 49 TANKING MEMBRANES 53 LIQUID DPM 55
DAMP PROOF MEMBRANE 100% RECYCLED ECOMEMBRANE 41 DPM TO PIFA STANDARD 49 TANKING MEMBRANES 53 LIQUID DPM 55 Sustainable damp proof membrance 100% recycled Sustainability in the Construction Sector There
More informationGAS PROTECTION GAS BARRIER SYSTEM 17 CO2 PROTECTION SYSTEM 25
GAS BARRIER SYSTEM 17 CO2 PROTECTION SYSTEM 25 Complete protection against methane and carbon dioxide Why the need for a protective Gas Barrier combined with Damp Proof Membrane? The Building Regulations
More informationHYDROSTOPEU LIQUID APPLIED ROOF WATERPROOFING SYSTEMS AH 25 LIQUID WATERPROOFING SYSTEM
KVT Dichtungssysteme GmbH Rugenbergener Strasse 2a Ellerbek 25474 Hamburg Germany Tel: 00 49 4101 383073 Fax: 00 49 4101 383074 e-mail: info@hydrostopeu.com website: www.hydrostopeu.com APPROVAL INSPECTION
More informationPURUS DRAINAGE PRODUCTS PURUS FLOOR GULLIES
PURUS AB Södra Dragongatan 15 SE-271 39 Ystad Sweden Tel: +46 10 41 44 900 Fax: +46 10 41 44 996 e-mail: info@purus.se web: www.purus.se/en-gb APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL APPROVALS
More informationLAPOLLA SPRAY APPLIED OPEN CELL INSULATION LAPOLLA ATOC
Lapolla Industries, Inc 15402 Vantage Parkway East, Suite 322 Houston Texas 77032 USA Tel: + 001 877 636 2648 e-mail: info@lapolla.com website: www.lapolla.com APPROVAL INSPECTION TESTING CERTIFICATION
More informationSIKA WATERPROOFING SYSTEMS SIKA-1 WATERPROOFING SYSTEMS
Sika Ltd Watchmead Welwyn Garden City Herts AL7 1BQ Tel: 01707 394444 Fax: 01707 329129 e-mail: waterproofing@uk.sika.com website: www.sika.co.uk APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL APPROVALS
More informationAgrément Certificate 08/4551 website: Product Sheet 1
Alucoil SA Pol Ind Bayas C/Ircio, parc R72-R77 09200 Miranda de Ebro (Burgos) Spain Tel: 00 34 947 33 33 20 Fax: 00 34 947 33 12 24 Page 1 of 10 Agrément Certificate e-mail: info@alucoil.com 08/4551 website:
More informationSIKALASTIC-152 EXTERIOR WATERPROOFING MEMBRANE. Product. Scope. Appraisal No. 811 [2013] Appraisal No. 811 (2013) Amended 28 August 2017
SIKALASTIC-152 EXTERIOR WATERPROOFING MEMBRANE Amended 28 August 2017 BRANZ Appraisals Technical Assessments of products for building and construction. Sika (NZ) Ltd PO Box 19 192 Avondale Auckland 1746
More informationNOVABRIK MORTARLESS BRICK SYSTEM Parement extérieur Verkleidung Bedachung. Regulations
CI/SfB Acheson & Glover 64 Old Moy Road Dungannon Co Tyrone BT71 6PU Tel: 028 8778 4208 Fax: 028 8778 4805 e-mail: novabriksales@acheson-glover.com website: www.acheson-glover.com/www.novabrik.com (21.9)
More informationSIKA ADHESIVE SYSTEM
Sika Ltd Watchmead Welwyn Garden City Hertfordshire AL7 1BQ Tel: 01707 394444 Fax: 01707 329129 e-mail: technical@uk.sika.com website: www.sika.com APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL APPROVALS
More informationSAINT-GOBAIN ISOVER CAVITY WALL INSULATION WALLTHERM(2) CAVITY WALL INSULATION
Saint-Gobain Isover UK East Leake Loughborough Leicestershire LE12 6JQ Tel: 0115 9451000 Fax: 0115 9451154 e-mail: isover.enquiries@saint-gobain.com website: www.isover.co.uk APPROVAL INSPECTION TESTING
More informationKOMPOZITOR CHIMNEY SYSTEMS FURANFLEX-RWV CHIMNEY LINING SYSTEM
Kompozitor Plastics Development Ltd Széchenyi út 60 Vecsés 2220 Hungary Tel: +36 29 554 600 Fax: +36 29 554 610 e-mail: info@kompozitor.hu website: www.furanflex.com APPROVAL INSPECTION TESTING CERTIFICATION
More informationLAPOLLA SPRAY APPLIED CLOSED CELL INSULATION LAPOLLA FL2000 (FOAM-LOK)
Lapolla Industries, Inc 15402 Vantage Parkway East, Suite 322 Houston Texas 77032 USA Tel: + 001 877 636 2648 e-mail: info@lapolla.com website: www.lapolla.com APPROVAL INSPECTION TESTING CERTIFICATION
More informationECOTHERM ECO RANGE FOR FLOORS, WALLS AND PITCHED ROOFS ECOTHERM ECO-CAVITY
EcoTherm Insulation (UK) Ltd Burnt Mills Industrial Estate Harvey Road Basildon Essex SS13 1QJ Tel: 01702 520166 Fax: 01702 420636 e-mail: info@ecotherm.co.uk website: www.ecotherm.co.uk APPROVAL INSPECTION
More informationKINGSPAN KOOLTHERM RANGE FOR FLOORS, WALLS AND PITCHED ROOFS KOOLTHERM K8
Kingspan Insulation Limited Pembridge Leominster Herefordshire HR6 9LA Tel: 01544 388601 Fax: 01544 388888 e-mail: info@kingspaninsulation.co.uk website: www.kingspaninsulation.co.uk APPROVAL INSPECTION
More informationJABLITE JABFLOOR BOARDS JABFLOOR PREMIUM 70 AND 100
Jablite Limited Infinity House Anderson Way Belvedere Kent DA17 6BG Tel: 020 8320 9100 Fax: 020 8320 9110 website: www.jablite.co.uk APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL APPROVALS FOR CONSTRUCTION
More informationConstruction. S-Vap 5000E SA Self-adhesive Vapour Barrier. Product Description
Roofing Product Data Sheet Edition 11.2014 / xtra UK Identification no. 02 09 45 05 100 0 000019 Version no. 03 S-Vap 5000E SA Self-adhesive Vapour Barrier Product Description S-Vap 5000E SA is a multi-layer
More informationJABLITE FULL FILL CAVITY WALL INSULATION JABFILL PREMIUM
APPROVAL INSPECTION TESTING CERTIFICATION Jablite Limited Infinity House Anderson Way Belvedere Kent DA17 6BG Tel: 020 8320 9100 Fax: 020 8320 9110 TECHNICAL APPROVALS FOR CONSTRUCTION Agrément Certificate
More informationSarnavap 1000E is an unsupported vapour control layer based on PE-LD (Low Density Polyethylen).
Roofing Roofing Product Data Sheet Edition 06.2013 Version no. DE 01 English Vapour control layer Product Description Uses Characteristics / Advantages Tests is an unsupported vapour control layer based
More informationBAUDER PIR INSULATION BAUDER PIR ROOF INSULATION BOARDS
Bauder Ltd 70 Landseer Road Ipswich Suffolk IP3 0DH Tel: 01473 257671 Fax: 01473 230761 e-mail: info@bauder.co.uk website: www.bauder.co.uk APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL APPROVALS
More informationProduct Building Regulations Detail Sheet 1
Caradon Catnic Ltd Pontygwindy Estate Caerphilly Mid-Glamorgan CF83 2WJ Tel: 01222 885955 Fax: 01222 863178 CI/SfB (31.9) Hh2 Agrément Certificate No 91/2638 Second issue* Designated by Government to issue
More informationDate of Second issue: 6 May 2010 Chris Hunt Greg Cooper
Domestic and General Insulation Ltd Energy House Magnis Works Roman Road Hereford HR4 9QR Tel: 0844 543 0043 Fax: 01432 268680 e-mail: headoffice@dgi.org.uk website: www.dgi.org.uk APPROVAL INSPECTION
More informationDEMILEC SPRAY APPLIED OPEN CELL INSULATION SEALECTION AGRIBALANCE INSULATION FOR EXTERNAL WALLS
Demilec Inc. 2925 Galleria Drive Arlington Texas 76011 USA Tel: + 011-817-640-4900 Fax: + 011-817-663-2000 e-mail: info@demilecusa.com website: www.demilecusa.com APPROVAL INSPECTION TESTING CERTIFICATION
More informationSPRINGVALE FLOORING INSULATION FOR CONCRETE GROUND FLOORS
Springvale EPS Ltd Dinting Vale Business Park Dinting Vale Glossop Derbyshire SK13 6LG Tel: 01457 863211 Fax: 01457 869269 e-mail: sales@springvale.com website: www.springvale.com APPROVAL INSPECTION TESTING
More informationK REND EXTERNAL RENDERS K REND STANDARD DASH RECEIVER
Kilwaughter Chemical Co. Ltd 9 Starbog Road Larne Co. Antrim BT40 2TJ Tel: 028 2826 0766 Fax: 028 2826 0136 e-mail: Sales@K-Rend.co.uk website: www.k-rend.co.uk APPROVAL INSPECTION TESTING CERTIFICATION
More informationURSA PARTIAL AND FULL FILL CAVITY WALL INSULATION URSA CAVITY BATT 32 INSULATION
URSA UK Ltd Crest House 102-104 Church Road Teddington Middlesex TW11 8PY Tel: 0208 977 9697 Fax: 0208 977 9456 e-mail: ursauk@ursa.com website: www.ursa-uk.co.uk APPROVAL INSPECTION TESTING CERTIFICATION
More informationRoofing. Carrier Membrane SA. Self-adhesive Carrier Membrane. Product Description. Tests. Product Data. Form. Storage
Carrier Membrane SA Self-adhesive Carrier Membrane Product Description Carrier Membrane SA is a multi-layer self-adhesive membrane made of polymer modified bitumen with an aluminium foil/random fibre top
More informationS Notaro Windows Ltd Huntworth Bridgwater Somerset TA7 0AJ Tel: Fax: PERMACELL FINESSE PVC-U WINDOW SYSTEM Fenêtre Fenster
CI/SfB (31.4) Hn6 S Notaro Windows Ltd Huntworth Bridgwater Somerset TA7 0AJ Tel: 01278 662298 Fax: 01278 663747 Agrément Certificate No 02/3954 Designated by Government to issue European Technical Approvals
More information84 Lapping & Jointing 86 Service Pipe Penetrations 87 Sealing to Cavity Wall Constructions 88 Protecting Membranes System Components.
84 Lapping & Jointing 86 Service Pipe Penetrations 87 Sealing to Cavity Wall Constructions 88 Protecting Membranes 90 System Components installation/ SYSTEM COMPONENTS INSTALLATION ADVICE LAPPING and JOINTING
More informationHYDRATHANE INTERIOR WATERPROOFING MEMBRANE. Product. Scope. Building Regulations. Appraisal No. 959 [2017] Appraisal No. 959 (2017) BRANZ Appraisals
Appraisal No. 959 [2017] HYDRATHANE INTERIOR WATERPROOFING MEMBRANE BRANZ Appraisals Technical Assessments of products for building and construction. Construction Chemicals Pty Ltd 49-57 Davis Street Wingfield
More informationTHERMABLOK AEROGEL LTD THERMAL INSULATION SYSTEMS THERMABLOK AEROGEL THERMASLIM INTERNAL WALL INSULATION SYSTEMS
Intelligent Insulation Ltd The Oasts Church Farm Estates Ulcombe Kent ME17 1DN Tel: 01622 840289 Fax: 0844 7792242 e-mail: info@thermablok.co.uk website: www.thermablok.co.uk APPROVAL INSPECTION TESTING
More informationAlkorplan Roof Waterproof Membranes
CI/SfB (47) Ln6 CERTIFICATE NO. 03/0192 Renolit Belgium N.V., Industrie Park De Bruwaan 9, B9700 Oudenaarde, Belgium. Tel: +32 55 339711 Fax: +32 55 318658 Alkorplan Roof Waterproof Membranes Systéme d
More informationSPRINGVALE CAVITY WALL INSULATION ECOBEAD PLATINUM CAVITY WALL INSULATION
Springvale EPS Ltd Dinting Vale Business Park Glossop Derbyshire SK13 6LG Tel: 01457 863 211 Fax: 01457 869 269 e-mail: sales@springvale.com website: www.springvale.com APPROVAL INSPECTION TESTING CERTIFICATION
More informationH + H AIRCRETE BLOCKS AND THIN-JOINT SYSTEM H + H THIN-JOINT SYSTEM
H + H UK Ltd Celcon House Ightham Sevenoaks Kent TN15 9HZ Tel: 01732 886333 Fax: 01732 886810 e-mail: marketing@hhcelcon.co.uk website: www.hhcelcon.co.uk APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL
More informationEUROTHANE GP. Date of Second issue: 17 October 2013 John Albon Head of Approvals Claire Curtis-Thomas
Recticel Insulation Products (a division of Recticel Ltd) Enterprise Way Meir Park Stoke-on-Trent Staffordshire ST3 7UN Tel: 01782 590470 Fax: 01782 590497 e-mail: technicalservices@recticel.com website:
More informationISOVER CAVITY WALL INSULATION CWS 36, CWS 34 AND CWS 32 FULL FILL CAVITY WALL SLABS
Saint Gobain Isover UK Whitehouse Industrial Estate Runcorn Cheshire WA7 3DP Tel: 0115 969 8009 Fax: 0115 945 1948 e-mail: isover.enquiries@saint-gobain.com website: www.isover.co.uk APPROVAL INSPECTION
More informationJABLITE FLAT ROOF INSULATION ROOF BOARDS JABLITE INVERTED ROOF INSULATION HIGH PERFORMANCE (HP)
APPROVAL INSPECTION TESTING CERTIFICATION Jablite Limited Infinity House Anderson Way Belvedere Kent DA17 6BG Tel: 020 8320 9100 Fax: 020 8320 9110 TECHNICAL APPROVALS FOR CONSTRUCTION Agrément Certificate
More informationWright Window Systems Ltd Whisby Way Lincoln LN6 3LQ Tel: Fax: THE DURAFLEX PVC-U WINDOW SYSTEM Fenêtre Fenster
CI/SfB (31.4) Hn6 Wright Window Systems Ltd Whisby Way Lincoln LN6 3LQ Tel: 01522 688881 Fax: 01522 688882 Agrément Certificate No 02/3907 Designated by Government to issue European Technical Approvals
More information