Stainless steel. 1.6 Stainless steel IP 69 K. Premium Panel, protection category IP 69K

Size: px
Start display at page:

Download "Stainless steel. 1.6 Stainless steel IP 69 K. Premium Panel, protection category IP 69K"

Transcription

1 T Premium Panel, protection category IP 69K IP 69 K.6 H H H Optionally with or without keyboard housing Resistant to high-pressure cleaning (protection category IP 69K). The seal lies between two surfaces and is ideally compressed by the screw fastening (see detailed drawing). Suitable for clean room use. Screw-fastening to comply with high standards in the food industry. With plastic stoppers on the inside or hex screws on the outside. Optimum EMC conditions. The labyrinth seal achieves a particularly high level of RF shielding of the enclosure. Accessibility. Internal rear panel bracket. This solution is clearly superior to external hinges from a hygiene point of view. Handling. Two duct connectors between the enclosures. rushed, grain 0 IP 69K to DIN Property rights: German patent no Clean room: Air purity class to DIN EN ISO 6- see page. Packs of with keyboard housing Premium Panel without keyboard housing.0 (AISI 0) (AISI 6L) ) ) ) ) ) ) Width () mm Height mm Operating housing (H) Keyboard housing (H) Depth mm Operating housing (T) For installation panel W x H Installation depth mm Operating housing 8.6 mm (9 ) x 5.8 mm (8 U) 8.6 mm (9 ) x 0 mm (7 U) Keyboard housing 8.6 mm (9 ) x 77 mm ( U) Operating housing Keyboard housing front 58 rear 6 front 58 rear 6 front 58 rear 6 front 58 rear 6 Support arm connection top bottom top bottom Accessories top, or bottom by rotating the enclosure Rear panel bracket ) Delivery times available on request. The rear panel holder holds the rear panel in an open position. see page 96. Premium TFT 7 see page. Accessories Page 890 Premium TFT 7 Page Support arm system -S Page Compact enclosures Hygienic Design Page 97 Rittal Catalogue /Industrial Enclosures

2 Command Panel housing with door T.6 H H Enclosure and door: Handle strips: Plastic-approved for use with foodstuffs, similar to RAL 500 (ultramarine blue). rushed, grain 0 IP 66 to EN 60 59/ Enclosure sealed all-round, with cut-out and reinforcement for support arm system, fastener with guide plate. Door with sealing frame and side handle strips. The support arm connection and door hinge may be swapped over by rotating the enclosure. Rittal service: Separate keyboard housing, other sizes, modified support arm connection or door hinge, drilled holes and cut-outs for switches and operator panels available on request. Approvals, see page 8. see page. Width () mm Packs of Page Height (H) mm Depth (T) mm (AISI 0) (AISI 6L) ) ) ) ) Accessories Matching mounting plate from AE ID no Support rails ) SZ SZ Lock systems Standard double-bit lock insert may be exchanged for mm lock inserts, plastic handle and T handle, type C, see page ) Delivery times available on request. ) Only with vertical attachment of punched rail x mm, see page 998. Semi-cylinder lock for retro-fitting to all stainless steel enclosures with cam lock. see page 957. Enclosure attachment -S, with pre-fitted screw for locating. see page. Accessories Page 890 Support arm system -S Page Rittal Catalogue /Industrial Enclosures

3 Support arm system -S Support arm system -S, In conjunction with Command Panels, terminal boxes 0 mm deep and compact enclosures AE from, this support arm system is particularly well-suited for meeting high standards of corrosion protection and hygiene. The tilting adaptor and enclosure coupling may optionally be mounted on the top or bottom of the enclosure. They are not suitable for use as the base point of a system. For this purpose, we recommend wall/base mountings, or with larger heights and widths, an additional pillar made of steel tubing or (available on request)..05 IP 69K to DIN (resistant to high-pressure cleaning) Load information: see page 7. IP 69 K.6 Support section -S, Attached to the connection components via clamping screws. Dimensions: External diameter: 8. mm Wall thickness:.6 mm.0 (AISI 0) rushed, grain 0 Other sizes to order available on request. Order example: U-shaped = Dimension A = 00 mm Dimension = 800 mm Dimension C = 0 mm The minimum dimensions must be adhered to, because of the bending radius and insertion depth of the enclosure attachment, housing coupling and wall/base mountings. Straight A min. = 00 mm, A max.= 000 mm A A mm A = ) Extended delivery times..9 /m ) L-shaped A min. = min. = 0 mm, max. = 500 mm A R0 A mm mm A = = ) Extended delivery times..9 /m ) U-shaped A min. = C min. = 0 mm, min. = 0 mm, max.= 500 mm A mm mm C mm ) ) ) ) A R0 R0 C A = = C =.9 /m )) )) ) Extended delivery times. ) Enclosure top-mounted ) Enclosure suspended Rittal Catalogue /Industrial Enclosures

4 Support arm system -S.6 Tilting adaptor, 0 -S For mounting between the Command Panel and Enclosure attachment or Housing coupling Seal and assembly parts. enclosure Enclosure attachment -S, For rigid fastening of the enclosure to the support section..05 Seals and clamping screws for support section -S,. For assembly of a pedestal, modular, see page 7, pieces are required. Enclosure reinforcement, see page Ø 8. for pedestal, bottom, enclosure 0 Ø Ø 0 Ø 8 Ø 0 Ø 6 Clamping screw Housing coupling -S For mounting on the vertical part of the support arm system. Rotation range: Approx. 50, lockable via knurled screw..05 Seals and clamping screws for support section -S,. Enclosure reinforcement, see page Ø 8. enclosure Ø 0 Ø 8 9 Clamping screw Rittal Catalogue /Industrial Enclosures

5 9 Support arm system -S Wall/base mounting, rigid, -S For attaching the support arm system to vertical or horizontal surfaces..05 Seals, adjusting screws to compensate for any irregularities, and clamping screws for support section -S,. Wall consoles, see page Ø / Adjusting screw Swivel base mount, -S For external mounting on Horizontal surfaces (suspended or top-mounted) Wall console ( only) Rotation range: Approx. 50, lockable via knurled screw..05 Seals and clamping screws for support section -S,. Rotation range may be limited in 60 increments using a limit plate, supplied loose. Attachment Wall consoles, see page 6. rear, thread front, hole Ø 9 mm Rear attachment Ø Ø 0 Ø 0 Front attachment Ø Ø 0 Ø 9 Rittal Catalogue /Industrial Enclosures 5

6 Support arm system -S.6 Wall console -S With holes for mounting ase mount, swivel, -S ( ), with screws Wall/base mount, rigid, -S ( ), with screws and nuts..0 (AISI 0) rushed, grain 0 Attachment rear, thread front, hole Ø 9 mm Rear fastening Seals and assembly parts. Rear attachment, thread Front, hole Ø 9 mm Hole for PG Hole for PG Front fastening Hole for PG Hole for PG Rittal Catalogue /Industrial Enclosures

7 Stand system Pedestal, modular, -S For the configuration of compact operating stations. May be compiled from the following modules: see page. Page Enclosure reinforcement enclosure attachments top/bottom Support section, straight (may be shortened to required length by sawing) mm mm mm Pedestal base plate, small Enclosure reinforcement -S For external or internal reinforcement of stainless steel enclosures of a corresponding size. Smaller enclosures may also be mounted directly without a flange. For use with Enclosure attachment Housing coupling (AISI 0) rushed Assembly parts for the enclosure and support section plus seals. Enclosure attachment , see page. Housing coupling , see page. 5 0 Packs of 6.0 Ø Ø 9 Ø 6 Ø 0Ø 9 9 Pedestal base plate, small With reinforcement bracket for assembling a support section via an enclosure attachment. With one hole at the rear for commercially available cable conduit gland M0. With two holes at the top (including sealing bung) for lower base attachment cross member. Prepared on the inside for a cable clamp DK or DK for strain relief..0 (AISI 0) rushed Packs of Assembly parts for enclosure attachment plus seal. Commercially available screws up to may be used for floor attachment Cable clamp DK or DK , see page 06. Rittal Catalogue /Industrial Enclosures 7

8 T IW operating station.6 H Complete solution for use in areas where hygiene is important. All that is needed is a standard commercially available tower PC up to W/H/D: 0 x 50 x 600 mm (max. 0 ) and a mouse. IP 66 to EN 60 59/09.000, complies with NEMA x. Also required: Connection cable for infeed, see page 00. Supplied unassembled. All components may also be ordered individually. see page. Delivery times available on request. Width () mm Packs of 900 Page Height (H) mm 875 Depth (T) mm 600 IW Supply includes Enclosure for tower PC,.0 (AISI 0) 9 Worktop,, prepared for keyboard 8.6 mm (9 )/ U 9 Enclosure attachment -S, Support section -S,, 500 mm long (may be shortened) Housing coupling -S, Premium TFT 7, IP 69K Power pack for TFT Connection cable for power pack Cross-member, 9 keyboard 8.6 mm (9 )/ U 9 Lock systems Standard double-bit lock insert may be exchanged for mm lock inserts, lock cylinder insert, plastic handle and T handles, type C, see page keyboard see page 9. Premium TFT 7 see page. Accessories Page 890 IW sheet steel Page 79 8 Rittal Catalogue /Industrial Enclosures

9 Compact, connection-ready enclosure for standard commercially available tower PCs, up to W/H/D: 0 x 50 x 600 mm (max. 0 ). The rear interfaces of the PC are readily accessible with the door open. Roof prepared for mounting worktop IW 690.0/.50 beneath surfaces ase prepared for mounting cross-member IW on surfaces Enclosure:.0 (AISI 0), brushed grain 0 ase for tower PC: Sheet steel, powder-coated in textured RAL 705. IP 66 to EN 60 59/09.000, complies with NEMA x (if the openings in the enclosure are covered or sealed in accordance with the protection category). IW enclosure for tower PC Enclosure sealed all round, r/h door hinge, with screw-fastened base on the inside of the tubular door frame to accommodate a tower PC, locked at the side with fitted cam locks, retaining strap to secure the tower PC to the base. Side panel right: With fitted socket strip with sockets, overvoltage protection and interference suppressor filter on the inside. Hole for cable gland M0 supplied loose, brass, for cable entry. Rear panel with cut-out for use of the connector gland SZ , supplied loose, Delivery times available on request. see page..6 Enclosure for tower PC Width () mm 760 Height (H) mm 760 Depth (T) mm 00 IW () 5 Accessories Cross-member, see below Worktop,, prepared for keyboard see below Worktop,, solid see below Lock systems Standard double-bit lock insert may be exchanged for mm lock inserts, lock cylinder insert, plastic handles and T handles, type C, see page Page Cross member, for IW To increase stability, the cross-member protrudes 0 mm in front of and behind the IW enclosure. Material and surface finish:,.0 (AISI 0) brushed, grain size 0 see page. To fit Packs of IW IW Levelling feet SO , see page 907, twin castors, see page 907. Worktop, For use in areas where enhanced hygiene is crucial. Material/surface finish: Chipboard, laminated on both sides with stainless steel film,.0 (AISI 0), with tough edge strip, brushed surface finish. Other sizes With drilled holes, recesses available upon request. see page. Worktop Prepared for keyboard 8.6 mm (9 )/ U Width mm Height mm Depth mm keyboard 9 / U, see page 9, support arm system -S,, see page 6. IW Solid Delivery times available on request. Accessories Page 890 Support arm system -S Page Premium Panel Page Premium TFT 7 Page Rittal Catalogue /Industrial Enclosures 9

Better by being quick to translate market trends into products. In this way, our innovative strength helps you to secure competitive advantages.

Better by being quick to translate market trends into products. In this way, our innovative strength helps you to secure competitive advantages. 02 Stainless Steel Rittal The System. The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind, we have bundled our innovative enclosure, power distribution,

More information

Our expertise your benefit. AE Available off the shelf.

Our expertise your benefit. AE Available off the shelf. Our expertise your benefit. AE Available off the shelf. 2 AE more benefits The whole is more than the sum of its parts The same is true of Rittal The System. With this in mind, we have bundled our innovative

More information

ENERGY-DISTRIBUTION. TwinLine N 44 The new system of floor-standing cabinets in IP44

ENERGY-DISTRIBUTION. TwinLine N 44 The new system of floor-standing cabinets in IP44 ENERGY-DISTRIBUTION TwinLine N 44 The new system of floor-standing cabinets in IP44 2 FLOOR-STANDING CABINETS TWINLINE N 44 2CPC 000 351 B0201 PRODUCT BENEFITS The new system of floor-standing cabinets

More information

Modular CABANA Kit 16 x 16 (6x6) Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper

Modular CABANA Kit 16 x 16 (6x6) Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16 long / 1/2 thick or 16 oz. copper Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper Modular CABANA Kit 16 x 16 (6x6) Hipped Roof & Build-in Transoms Entry Key Lock Set (bright brass or dark bronze)

More information

SECTION (Master Template Final-05) ELECTRICAL BOXES. A. Provide boxes for electrical equipment and wiring devices as follows:

SECTION (Master Template Final-05) ELECTRICAL BOXES. A. Provide boxes for electrical equipment and wiring devices as follows: SECTION 16130 (Master Template Final-05) ELECTRICAL BOXES PART 1 GENERAL 1.01 SECTION INCLUDES A. Provide boxes for electrical equipment and wiring devices as follows: 1. Wall and ceiling outlet boxes.

More information

Glass Reinforced Polyester Enclosures BPG. Glass Reinforced Polyester Enclosures

Glass Reinforced Polyester Enclosures BPG. Glass Reinforced Polyester Enclosures BPG 42 The BPG range comprises 16 sizes of enclosure manufactured in glass reinforced polyester (GRP). This material is highly resistant to contamination from oils, fats, aliphatic and aromatic carbohydrates,

More information

SECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS

SECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and

More information

UNDERGROUND SERVICES SECONDARY

UNDERGROUND SERVICES SECONDARY Reference UNDERGROUND SERVICES SECONDARY Underground services secondary... U- 1 General requirements for underground service... U- 2 Name of parts for underground service... U- 3 Conduit layouts... U-

More information

M7 Shelving for picking. for medium and heavy loads

M7 Shelving for picking. for medium and heavy loads M7 Shelving for picking for medium and heavy loads Storage system for manual picking of products following the man-togoods principle. Its main benefits are: - Possibility of storing medium to heavy loads.

More information

Pick Smarter. Pick Better. Pick UNEX. MODULAR FLOW-THROUGH WORK STATIONS FOR ASSEMBLY AND LINESIDE STORAGE

Pick Smarter. Pick Better. Pick UNEX. MODULAR FLOW-THROUGH WORK STATIONS FOR ASSEMBLY AND LINESIDE STORAGE MODULAR Pick Smarter. Pick Better. Pick UNEX. FLOW-THROUGH WORK STATIONS FOR ASSEMBLY AND LINESIDE STORAGE UNEX Flow Cells keep processes and profits flowing Accelerate productivity. Improve Ergonomics.

More information

Technical data pag SANITARY LINE. Small cabinets QSD pag. 3. Small cabinets QSE pag. 5. Accessories for Sanitary Line pag. 7

Technical data pag SANITARY LINE. Small cabinets QSD pag. 3. Small cabinets QSE pag. 5. Accessories for Sanitary Line pag. 7 Technical data pag. 1 Small cabinets QSD pag. 3 Small cabinets QSE pag. 5 Accessories for pag.. SANITARY LINE TECHNICAL DATA 1 TECHNICAL DATA It is commonly thought that everything to do with the pharmaceutical

More information

Technical System Catalogue Modular PDU (PSM)

Technical System Catalogue Modular PDU (PSM) Technical System Catalogue Modular PDU (PSM) Benefits of PSM busbars at a glance Modular configuration, flexibly extendible Redundant designs in busbars are supported Vertical mounting in the rack without

More information

Smarter. Safer. Leaner.

Smarter. Safer. Leaner. Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter

More information

D300. By Actiu.

D300. By Actiu. D00 By Actiu D00 CHARACTERISTICS ABS Top Trim mm thickness and 7 width. Silver or dark grey. Different sizes; 7, 0 and 8 for vertical used and 60,80,00 and 0 width to be used at the top of the modules.

More information

MODEL: SIGHT-LINE- COMMAND CENTER CONSOLES

MODEL: SIGHT-LINE- COMMAND CENTER CONSOLES 2015 WINSTED CORPORATION 1) GENERAL DESCRIPTION 1.1 Sight-Line Command Center Consoles. SeeAppendix A - C for typical styles and measurements. 1.2 The contractor shall supply a system capable of supporting

More information

New consumer units. Design and functionality in plain sight.

New consumer units. Design and functionality in plain sight. New consumer units. Design and functionality in plain sight. CONSUMER UNITS A wide range of stylish solutions for any type of masonry or plasterboard wall. Consumer unit with white blind cover Consumer

More information

Metric Storage Systems. Mississauga, Ontario

Metric Storage Systems. Mississauga, Ontario 1-800-265-5117 Metric Storage Systems Mississauga, Ontario www.metricss.com CNC Tool Storage Solutions SOLUTIONS Thanks to the flexibility of the CNC line, your tools will be protected during regular handling,

More information

B. Polyethylene samples shall be submitted for Owner approval of color and quality.

B. Polyethylene samples shall be submitted for Owner approval of color and quality. Glass Rail ENGINEERED DASHERBOARD SPECIFICATIONS PART 1 - GENERAL 1.01 PROJECT SCOPE A. Contractor shall furnish and install one complete set of steel framed dasherboards as indicated on the drawings and

More information

Design with Stellar Stainless Steel

Design with Stellar Stainless Steel Stainless Steel AIR UNO Stellar Stainless Steel Worktops Made from Austenitic Stainless Steel AISI 304 18/10 Example of Typical Worktop Made of AISI 304, 18-10 stainless steel, thicknesses 10/10, with

More information

RN Optical Termination Panel (RN OTP)

RN Optical Termination Panel (RN OTP) RN Optical Termination Panel (RN OTP) General The RN Optical Termination Panel(RN OTP) is specifically designed to house optical splitters while also catering for fiber termination in a single enclosure.

More information

distribution Modular Scaffolding

distribution Modular Scaffolding Modular Scaffolding Modular scaffolding PDM Universal scaffolding system plettac-pl PDM Application A characteristic feature of plettac PDM system is the use of wedge joint which provides quick and safe

More information

Diffused Aeration Piping Equipment

Diffused Aeration Piping Equipment 1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections

More information

SEISMIC PROTECTION SYSTEMS Bracing Products for Racks & Cabinets

SEISMIC PROTECTION SYSTEMS Bracing Products for Racks & Cabinets SEISMIC PROTECTION SYSTEMS Bracing Products for Racks & Cabinets Seismic Frame Two-Post Rack Page 11-3 Seismic Protection Products - Racks Page 11-6 Seismic Protection Products - Runway Page 11-8 Seismic

More information

HIGH MAST CAMERA POLE ASSEMBLY GENERAL

HIGH MAST CAMERA POLE ASSEMBLY GENERAL 10-3.24 HIGH MAST CAMERA POLE ASSEMBLY GENERAL The Contractor must furnish and install the following equipment for high mast camera pole assembly as described herein and as shown on the plans: 1. Camera

More information

An innovative and versatile concept offering countless solutions for all your storage needs from simple single bays to multi-tier installations.

An innovative and versatile concept offering countless solutions for all your storage needs from simple single bays to multi-tier installations. S T E E L S H E E T S H E L V I N G An innovative and versatile concept offering countless solutions for all your storage needs from simple single bays to multi-tier installations. Technical characteristics:

More information

Post Style with ABS Real Tuff

Post Style with ABS Real Tuff Post Style with ABS Real Tuff Mantova s patented Post Shelving with ABS Real Tuff removable shelves have been making life easier for thousands of Australian businesses for more then a decade. Removable

More information

Com-Tray. Under Floor

Com-Tray. Under Floor Com-Tray Chalfant, a leading supplier of cable trays and systems for utilities, industrial plants, and commercial service, offers Com-Tray, a unique modular, cost-saving system for routing and protecting

More information

Ensto Industrial Solutions. Enclosing solutions. for the solar energy industry

Ensto Industrial Solutions. Enclosing solutions. for the solar energy industry Ensto Industrial Solutions Enclosing solutions for the solar energy industry Ensto Industrial Solutions for demanding environments We are known in the industry for designing and manufacturing standard

More information

FEATURES APPLICATIONS. Technical data sheet SSW - STEEL STRONG-WALL FOR TIMBER FRAME RACKING RESISTANCE.

FEATURES APPLICATIONS. Technical data sheet SSW - STEEL STRONG-WALL FOR TIMBER FRAME RACKING RESISTANCE. The Steel Strong-Wall is a corrugated steel panel which is designed to be fixed directly to the concrete foundations of a building, within the external or internal wall, via a bolted connection. FEATURES

More information

ProShell Support Profile for AS/RS and Transfer Cars. An Option for Conductix-Wampfler Conductor Rail Systems

ProShell Support Profile for AS/RS and Transfer Cars. An Option for Conductix-Wampfler Conductor Rail Systems for AS/RS and Transfer Cars An Option for Conductix-Wampfler Conductor Rail Systems Table of Contents System Description 4 System Advantages 5 Technical Data 6 Modular Concept 6 Basic Modules 7 ProShell

More information

Flush mounting boxes. For masonry - TECHNICAL CHARACTERISTICS

Flush mounting boxes. For masonry - TECHNICAL CHARACTERISTICS Flush mounting boxes For masonry - TECHNICAL CHARACTERISTICS Technical specifications technopolymer highly resistant to impacts and to deformation temperature during installation: from -15 C to +60 C resistance

More information

Low-profile, 11U high cabinets hold networking equipment, servers, and phone equipment.

Low-profile, 11U high cabinets hold networking equipment, servers, and phone equipment. RM140A-R3 RM140A-M-R3 RM145A-R3 RM145A-M-R3 Small Office/Home Office (SOHO) Cabinets Low-profile, 11U high cabinets hold networking equipment, servers, and phone equipment. Fit under most desktops in the

More information

PATHWAYS FOR COMMUNICATIONS SYSTEMS

PATHWAYS FOR COMMUNICATIONS SYSTEMS 270528 PATHWAYS FOR PART 1 GENERAL 1.1 WORK INCLUDED A. Provide all labor, materials, and equipment for the complete installation of work called for in the Contract Documents. 1.2 SCOPE OF WORK A. This

More information

Section 13 Lift-Position Units

Section 13 Lift-Position Units BOSCH BOSCH HN08-0 Section HP2 Units () are used at workstations when workpiece pallets have to be accurately positioned. Lift-position units lift the workpiece pallet from the conveying media so that

More information

Protective Capony RTC-16

Protective Capony RTC-16 Protective Capony RTC-16 ASSEMBLY AND OPERATION MANUAL Protective Canopy RTC-16 Assembly and Operation Manual CONTENT: 1 APPLICATION...3 2 OPERATION CONDITIONS...3 3 TECHNICAL SPECIFICATIONS...3 4 DELIVERY

More information

Electrical Metallic Tubing (EMT) Fittings

Electrical Metallic Tubing (EMT) Fittings Suggested Specifications for Electrical Metallic Tubing (EMT) Fittings Series 2 Insulated EMT Connector (Raintight) (Compression Type) Series 20 EMT Coupling (Raintight) (Compression Type) Series 0 Pipe

More information

MODEL: IMPULSE - DUAL SIT/STAND CONSOLES

MODEL: IMPULSE - DUAL SIT/STAND CONSOLES 2015 WINSTED CORPORATION 1) GENERAL DESCRIPTION 1.1 Impulse Dual Sit/Stand Consoles. See Appendix A - D for typical styles and measurements. 1.2 The contractor shall supply a system capable of supporting

More information

A. Access doors and frames are part of an access door and frame allowance.

A. Access doors and frames are part of an access door and frame allowance. SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

PRODUCT RANGE CABLE GLANDS

PRODUCT RANGE CABLE GLANDS PRODUCT RANGE CABLE GLANDS INDUSTRIAL CABLE GLANDS The ideal solution for each application HUMMEL offers a huge range of Cable Glands for industrial applications. High-quality materials and innovative

More information

CNC Technology. Custom Enclosures from Flat-Sheet Plastic - No Tooling! Advantages. Engineering Expertise

CNC Technology. Custom Enclosures from Flat-Sheet Plastic - No Tooling! Advantages. Engineering Expertise Custom DESIGN EnclosureS Custom Enclosures from Flat-Sheet Plastic - No Tooling! Custom designed plastic enclosures, housings, covers, panels and parts without tooling. We develop and manufacture enclosures

More information

801-MORD Mordred FIXING: Ground. ORDER No: CUSTOMER: Complied by Date AB 30/06/15 ISSUE ECN DATE SIGN /07/15 AB

801-MORD Mordred FIXING: Ground. ORDER No: CUSTOMER: Complied by Date AB 30/06/15 ISSUE ECN DATE SIGN /07/15 AB CUSTOMER: 0-MORD Mordred ORDER No: FIXING: Ground Complied by Date 0/0/5 ISSUE ECN DATE SIGN 0 7 0/07/5 CUSTOMER: 0-MORD Mordred ORDER No: FIXING: Ground Low tower.m single slide Low scramble net High

More information

PITCHED ROOF. Photovoltaic Mounting Systems. Assembly Instructions. for roofing tiles, plain tiles and slate

PITCHED ROOF. Photovoltaic Mounting Systems. Assembly Instructions. for roofing tiles, plain tiles and slate Photovoltaic Mounting Systems Assembly Instructions PITCHED ROOF for roofing tiles, plain tiles and slate S:FLEX GmbH 09/2017 / design and engineering is subject to change 1 Index 1 Introduction 1.1 Intended

More information

ifix INSTALLATION MANUAL PV flat roof installation system Version

ifix INSTALLATION MANUAL PV flat roof installation system Version ifix PV flat roof installation system INSTALLATION MANUAL Version 2012-09-06 ifix Installation Manual Version 2012-09-06 Seite 1 Table of contents Table of contents... 1 Special characteristics of ifix...

More information

Mechanical Loading Dock Levelers

Mechanical Loading Dock Levelers Mechanical Loading Dock Levelers With over 30 years of experience manufacturing quality loading dock equipment, Pentalift is your single-source supplier for loading dock levelers, dock lifts, dock seals

More information

Logistics and industry. Consignment sales

Logistics and industry. Consignment sales Logistics and industry Consignment sales Saving time and money for consignment sales Wanzl - a renowned name in the trade for more than 50 years and still favoured today for its sophisticated universal

More information

PERI PD 8 The cost-effective shoring for slab tables and high loads

PERI PD 8 The cost-effective shoring for slab tables and high loads PERI PD 8 The cost-effective shoring for slab tables and high loads Edition 06/2010 PERI GmbH Formwork Scaffolding Engineering P.O. Box 1264 89259 Weissenhorn Germany Tel +49 (0)7309.950-0 Fax +49 (0)7309.951-0

More information

Record Master SHELVING SYSTEMS

Record Master SHELVING SYSTEMS Record Master SHELVING SYSTEMS Storage Solutions Four-Post Heavy-Duty X-Ray Storage Case Style Aisle-Saver Mobile by Borroughs Welcome to Record Master Easy. Organized. Accessible. Many business and professional

More information

SECTION Summit Phenolic Lockers (Solid Phenolic Lockers)

SECTION Summit Phenolic Lockers (Solid Phenolic Lockers) SECTION 10 51 00 Summit Phenolic Lockers (Solid Phenolic Lockers) Part 1-General 1.01 Summary A. Section includes: solid phenolic lockers solid phenolic benches 1.02 Submittals A. Submittals: Comply with

More information

Fig. 1 - Standard Clevis Hanger

Fig. 1 - Standard Clevis Hanger Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension

More information

PORTA-FAB Cleanroom Wall Systems

PORTA-FAB Cleanroom Wall Systems PORTA-FAB Cleanroom Wall Systems FABLINE FURRING 500 INSTALLATION INSTRUCTIONS IMPORTANT Porta-Fab Advises A Thorough Reading of These Instructions Before Beginning Installation. INTRODUCTION Porta-Fab

More information

FERROPLAST Panels: Underway on all roads. Configurator

FERROPLAST Panels: Underway on all roads. Configurator FERROPLAST Panels: Underway on all roads Configurator Trailer Services Technology FERROPLAST installed to meet your requirements. This brochure not only presents you with the many advantages of the long-lived

More information

GroundTrac. Installation Manual

GroundTrac. Installation Manual APPLICATION: The GroundTrac system is designed with a minimum amount of installed footings at greatly reduced labor. The system integrates with ordinary 1-1/2 schedule #40 galvanized water pipe. This ground

More information

NOVA 2 SERIES. Kitchen, bathroom & wardrobe accessories.

NOVA 2 SERIES. Kitchen, bathroom & wardrobe accessories. NOVA 2 SERIES Kitchen, bathroom & wardrobe accessories. Consistent details such as the shadow edge between the mounting surface and the product compliments the discreet and complete series. All elements

More information

Stand construction services 2018 Modular stands

Stand construction services 2018 Modular stands Stand construction services 2018 Modular stands Modular stands Deutsche Messe Global Fairs. Global Business. 1 Stand construction services Modular stands Stands, modular Modular stands Deutsche Messe Save

More information

SECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS

SECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,

More information

Installation Instructions

Installation Instructions Installation Instructions Dynarail Safety Ladder System Corrosion Resistant Nonconductive Fire Retardant High Strength-To-Weight Ratio Long, Low Maintenance Life Meets OSHA, BOCA & Other Building Code

More information

SECTION HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS

SECTION HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS Page 1 of 6 SECTION 08 32 20 HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED BI-FOLD GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,

More information

Fire Protection Valves

Fire Protection Valves 4/4/EN/6 Fire Protection Valves Type FV-K90 FVZ-K30 with German Test Certificate (General Building Approval) Z-41.3-317 Z-41.3-319 TROX GmbH Telephone +49/28 45/2 02-0 Telefax +49/28 45/202-265 Heinrich-Trox-Platz

More information

ILKAclean Clean Room Systems

ILKAclean Clean Room Systems ILKAclean Clean Room Systems Systems for Ideas Cleanliness with System ILKAZELL Isoliertechnik GmbH Zwickau is your versatile expert when clean rooms are to meet unique demands. Thanks to the untiring

More information

DURA-BLOK Rooftop Supports

DURA-BLOK Rooftop Supports Cooper B-Line s new line of DURA-BLOK products gives you a versatile and long-term solution for all your roof top support needs. Designed with flexibility in mind, Dura-Blok is ideal for roof top support

More information

UNI Roof Catalogue CTG001-

UNI Roof Catalogue CTG001- UNI Roof Catalogue Foreward DESSA offers efficient lightweight temporary roofing, encapsulation solutions, aluminium lattice girders and safety products. DESSA s unique and distinctive aluminium solutions

More information

DRAFT UGANDA STANDARD

DRAFT UGANDA STANDARD DRAFT UGANDA STANDARD DUS1910-2 First Edition 2017-10-20 Metal Chairs for 0ffice Purposes Part. 2: Revolving and Tilting- Specification Reference number DUS 1910-2:2017 UNBS 2017 DUS 1910-2:2017 Compliance

More information

19 SLIMbox Wall Mounting Cabinets

19 SLIMbox Wall Mounting Cabinets 19 SLIMbox Wall Mounting Cabinets W:500mm SLIMbox Series Wall Mounting Cabinets The product range is designed for Small Offices, Homes offices, where a smaller network housing performed. As well decoratively

More information

Air flue duct for use with ecotec boilers

Air flue duct for use with ecotec boilers For the installer Flue installation instructions Air flue duct for use with ecotec boilers Concentric System Ø 80/5 (Galvanized steel air duct/plastic flue duct) GB Contents Notes on the documentation

More information

Main Distribution Frames

Main Distribution Frames A Main Distribution Frame (MDF) is the interface between The subscriber cables coming from the local network (line side) and the switching equipment in the exchange (system side) 2 Different criteria need

More information

Revision 1 RAM ELEVATORS. Elevator Electrical Planning Guide. RAM Manufacturing Ltd

Revision 1 RAM ELEVATORS. Elevator Electrical Planning Guide. RAM Manufacturing Ltd RAM ELEVATORS Elevator Electrical Planning Guide This guide is intended for people with an understanding of electricity. If you are not, please consult a licensed electrician as errors in application of

More information

Communications Page 1 of 9

Communications Page 1 of 9 Page 1 of 9 Last Update: April 23 rd, 2014 Introduction Design In the design of Telecommunications systems in Purdue facilities, the overall consideration should be to understand and treat telecom as a

More information

SPORTS AND STADIUM LIGHTING. Solutions for Amatuer and Professional Athletic Venues

SPORTS AND STADIUM LIGHTING. Solutions for Amatuer and Professional Athletic Venues SPORTS AND STADIUM LIGHTING Solutions for Amatuer and Professional Athletic Venues ENGINEERED SUPPORT STRUCTURES Now a global network of 50 facilities spanning 15 countries, Valmont Industries consists

More information

Luka Quality Assurance Manual (Eng)

Luka Quality Assurance Manual (Eng) Luka Quality Assurance Manual (Eng) Contents: 1 General... 3 1.01 Foreword... 3 2. Quality assurance standards for air ducts... 4 A.1.00 Rectangular galvanised steel ducts... 4 A.2.00 Embedded galvanised

More information

PHYSICAL FACILITIES Consultant s Handbook Division 27 COMMUNICATIONS 0000 COMMUNICATIONS

PHYSICAL FACILITIES Consultant s Handbook Division 27 COMMUNICATIONS 0000 COMMUNICATIONS 1 Introduction 1.1 In the design of Telecommunications systems in Purdue facilities, the overall consideration should be to understand and treat telecom as a utility. It should be assumed that all new

More information

For all technical info.

For all technical info. For all technical info www.fontanotstaircases.co.uk Fontanot: quality profile [ENVIROMENTALLY AWARE] MINIMUM IMPACT OF ITS MANUFACTURNIG ACTIVITY AND ENVIRONMENTALLY FRIENDLY [RESISTANT TO WEAR] INNOVATION

More information

The S.10 ALL ALUMINUM LIFT & SLIDE DOOR SYSTEM. Expanding spaces to the extraordinary

The S.10 ALL ALUMINUM LIFT & SLIDE DOOR SYSTEM. Expanding spaces to the extraordinary The S.10 ALL ALUMINUM LIFT & SLIDE DOOR SYSTEM Expanding spaces to the extraordinary Overview Elevation View of a 4-panel Lift & Slide Door System - Stacked Configuration Panda s Lift & Slide Door Systems

More information

SECTION I -- IRONWORK

SECTION I -- IRONWORK SECTION I -- IRONWORK CONTENTS PAGE 1. GENERAL... I-2 1.1. Introduction... I-2 2. REQUIREMENTS... I-2 2.1. General... I-2 2.2. Auxiliary Framing... I-2 2.3. High Seismic Risk Zone Requirements... I-3 2.4.

More information

CLM-36 MISURATORI CAPACITIVI IN CONTINUO CONTROLLI DI LIVELLO. Capacitive level meters CLM 36. Features of variants. Accessories

CLM-36 MISURATORI CAPACITIVI IN CONTINUO CONTROLLI DI LIVELLO. Capacitive level meters CLM 36. Features of variants. Accessories CLM-36 MISURATORI CAPACITIVI IN CONTINUO CONTROLLI DI LIVELLO Capacitive level meters CLM 36 Capacitive level meters Riels CLM are designed for continuous level measurement of liquids, powders and bulk-solid

More information

HELIOSTAR 252, 218 HORIZONTAL, FREE INSTALLATION

HELIOSTAR 252, 218 HORIZONTAL, FREE INSTALLATION HELIOSTAR 252, 218 HORIZONTAL, FREE INSTALLATION INSTALLATION INSTRUCTIONS ENERGY AND SANITARY SYSTEMS Installation requirements General requirements The free-standing installation set is to be used for

More information

RB WEIR GATES MODEL GENERAL DESCRIPTION DESIGN CONSTRUCTION

RB WEIR GATES MODEL GENERAL DESCRIPTION DESIGN CONSTRUCTION GENERAL DESCRIPTION The Orbinox model RB Weir Gate is designed for downward opening applications where a more accurate flow control is required. The water flows over the top of the slide permitting a constant

More information

SEMPEO SQA Unit Code FP3G 04 Forming and assembling electrical cable enclosure and support systems

SEMPEO SQA Unit Code FP3G 04 Forming and assembling electrical cable enclosure and support systems Forming and assembling electrical cable enclosure and support Overview This standard covers a broad range of basic competences that you need to form and assemble electrical cable enclosure and support

More information

SECTION ALUMINUM GATES

SECTION ALUMINUM GATES P.O. Box 1058 370 South Athol Rd. Athol, Massachusetts 01331 Phone: (978) 249-7924 Fax: (978) 249-3072 SECTION ALUMINUM GATES PART 1 GENERAL 1.01 SCOPE OF WORK A. The CONTRACTOR shall furnish all labor,

More information

Thank you for purchasing the SC-CONVERSION System 500/600 Conversion Kit. This Kit is available in two different versions:

Thank you for purchasing the SC-CONVERSION System 500/600 Conversion Kit. This Kit is available in two different versions: Rev. 1 (Jun 30, 2016) Thank you for purchasing the SC-CONVERSION System 500/600 Conversion Kit. This Kit is available in two different versions: Part # 4K01328-FI SC-CONVERSION Conversion Kit with MEI

More information

SECTION PATHWAYS FOR COMMUNICATIONS SYSTEMS

SECTION PATHWAYS FOR COMMUNICATIONS SYSTEMS SECTION 270528 PATHWAYS FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Communications equipment coordination and installation. 2. Sleeves for pathways and cables. 3. Raceway

More information

mediatek mediatek Library and archive shelving systems Taking shelving to the next level BC004.03

mediatek mediatek Library and archive shelving systems Taking shelving to the next level BC004.03 mediatek Library and archive shelving systems Taking shelving to the next level BC004.03 mediatek Library and archive shelving systems The Mediatek range of shelving is designed to offer space efficient

More information

VAN RACKING SYSTEMS.

VAN RACKING SYSTEMS. VAN RACKING SYSTEMS www.baggioedesordi.com VAN RACKING SYSTEMS We organize the space of each van and improving its capacity. Our objective? Making the interior equipment rational and safe. Upright > Material:

More information

As versatile as your requirements siemens.com/sivacon-8mf

As versatile as your requirements siemens.com/sivacon-8mf SIVACON 8MF1 system cubicles As versatile as your requirements siemens.com/sivacon-8mf Equipped for all applications In today s industrial environment, the main prerequisite for high-performance control

More information

Three-sided barrier compliant to DIN EN ISO Depending on location, design also as wind protection. Clear height (DH) Three-sided barrier

Three-sided barrier compliant to DIN EN ISO Depending on location, design also as wind protection. Clear height (DH) Three-sided barrier of 5 Page Car SingleVario 06 Stack Parker 06 50 for vehicle up to 5.00 m = 6 long (50 for vehicle up to 5.0 m 7 long) Depending on location, design also as wind protection. Product Data CONFORMITY 06/06/G63

More information

Box Rail. Single Box Rail Bracket

Box Rail. Single Box Rail Bracket HANGERS & RAILS Box Rail Accordion Door Hangers Max. Door Weight (SWL) 450 lbs Meets ANSI/BHMA A156.14, Grade 1. Rail is carefully formed to give an even tread to hanger wheels. Packaging: Bundled without

More information

PH6000. Key Features

PH6000. Key Features Phenolic Locker Series PH6000 Key Features ½ inch doors and end panels Durable, backed by a 20 year warranty. Ideal choice for wet-use areas including pools and recreation centers Graffiti resistant, permanent

More information

TI-LINE TILUX DURABASE. Borderless Shower Areas

TI-LINE TILUX DURABASE. Borderless Shower Areas TI-LINE TILUX DURABASE Borderless Shower Areas Borderless Shower Areas TI-LINE The patented linear drainage system that makes a perfect junction with walls. An overview of all the system s components along

More information

RAISED ACCESS FLOOR SYSTEM TECHNICAL SPECIFICATION

RAISED ACCESS FLOOR SYSTEM TECHNICAL SPECIFICATION RAISED ACCESS FLOOR SYSTEM TECHNICAL SPECIFICATION PROVISIONAL BILL OF QUANTITIES RAISED ACCESS FLOOR SYSTEM TECHNICAL SPECIFICATION 1 RAISED ACCESS FLOOR SPECIFICATION SYSTEM DESCRIPTION This specification

More information

Use this tough enclosure to keep components safe and out of the way.

Use this tough enclosure to keep components safe and out of the way. RMN625A-R2 RMN650A-R2 NEMA 12 Wallmount Cabinet Use this tough enclosure to keep components safe and out of the way. Choose from 24", 36", or 48" high cabinets. Customer Support Information Order toll-free

More information

SHELTER LOGIC PRODUCT RANGE

SHELTER LOGIC PRODUCT RANGE SHELTER LOGIC PRODUCT RANGE Peak Style Storage Sheds 6x6 Code: SL70417 Barcode: 5013856997788 Height: 1800mm Width: 1800mm Depth: 1800mm Height: 14cm Width: 104cm Depth: 43cm Weight: 24.5Kg SRP: 165.00

More information

Ladders and scaffold systems

Ladders and scaffold systems Ladders and scaffold systems Customised-solutions for railway vehicles For each application the right solution! www.krause-systems.com Introduction Business Portrait KRAUSE-Werk GmbH & Co. KG For more

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300

More information

B. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work.

B. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work. SECTION 10 5113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,

More information

BALUSTRADES. Products and accessories.

BALUSTRADES. Products and accessories. BALUSTRADES Products and accessories SADEV BALUSTRADE BETWEEN DESIGN & SECURITY The glass balustrade is a trendy and popular product, which is suitable for a multitude of applications. The glazed balustrades

More information

Project drains Floor/Bathroom drains Shower channels Basement drains in stainless steel Drains and channels Exterior installation 101

Project drains Floor/Bathroom drains Shower channels Basement drains in stainless steel Drains and channels Exterior installation 101 101 -Professional advantages Linearis Comfort Stainless steel cover is reversable and tileable Tip: Minimum installation depth for bathroom renovation Channel length:,,, 1050,. Shower channel, System 125

More information

V1703 SYSTEM DESCRIP TION JB 2000 AT HOME WITH ANY STYLE

V1703 SYSTEM DESCRIP TION JB 2000 AT HOME WITH ANY STYLE V1703 SYSTEM DESCRIP TION JB 2000 AT HOME WITH ANY STYLE TURE FINISHING PARTITIONS CEILINGS DOORS FURNITURE FINISHING PARTITIONS CEILINGS DOO JB 2000 The JB 2000 relocatable partition wall is a modular,

More information

Chapter contents. Balcony and terrace drainage. Point drainage. Line drainage. Balcony and terrace drainage

Chapter contents. Balcony and terrace drainage. Point drainage. Line drainage. Balcony and terrace drainage Chapter contents 8 Point drainage ACO balcony and terrace drains Stainless steel, material grade 304 Nominal width: DN 50 DN 100 As a single and direct drainage system For balconies and terraces With or

More information

1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases.

1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases. SECTION 260529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases. 1.2

More information

SYSTEM S7-RHOMBOS INSTALLATION MANUAL

SYSTEM S7-RHOMBOS INSTALLATION MANUAL SYSTEM S7-RHOMBOS INSTALLATION MANUAL GENERAL INFORMATION GENERAL INFORMATION This assembly manual addresses all metal ceilings manufactured by durlum. The different sections describe the related/relevant

More information

CLINICS. LABS. PHARMACIES. PREP AND PACK.

CLINICS. LABS. PHARMACIES. PREP AND PACK. CLINICS. LABS. PHARMACIES. PREP AND PACK. Everything you need to build, renovate or supplement a lab WHERE THE MOST INNOVATIVE WORK IN THE WORLD IS BEING DONE OUR PRODUCTS ARE MADE FOR PLACES WHERE THE

More information