BLUEKIT VENTILATION FLAPS

Size: px

Start display at page:

Download "BLUEKIT VENTILATION FLAPS"

Laurel Bridges
6 years ago
Views:

1 BLUEKIT VENTILATION FLAPS 1

2 Horizontal mounting into the shaft/the roof Vertical mounting into the shaft/ the facade EN_BLUEKIT_VENTILATIONFLAPS_

Summary New building... 4 Horizontal mounting... 4 Ventilation flap JK-180 HV... 4 Roof vent JK-180 HVC... 6 Roof vent with blades JK-180 HVL... 8 Thermo Flap TF... 10 Vertical mounting.

3 Summary New building... 4 Horizontal mounting... 4 Ventilation flap JK-180 HV... 4 Roof vent JK-180 HVC... 6 Roof vent with blades JK-180 HVL... 8 Thermo Flap TF Vertical mounting Ventilation flap with weather protection grilles ALAS.. 12 Insulated Louvre Windows S9iVt-05 LF-MR Tairmo-LF-MR Choosing the best solution for ventilation flaps is determining for ventilation regulation and optimization. They are crucial for the execution of an efficient energetic concept and contribute to the decrease of building operating costs. It is possible to combine to our BlueKit system, Louvre Windows or ventilation flaps which are in accordance with EN certified, together or without protection accessories such as weather protection grilles or roof window. Modernisation Horizontal and vertical mounting JK Horizontal mounting JK-190 Side-corner mounting (accessories)

4 NEW BUILDING Horizontal JK-180 HV CERTIFIED EN after The most efficient solution for new buildings Product Flush installation Easy connection to exterior ventilation shaft Possible combination with roof window Easy installing, easy access to motor To choose from : spring return actuator or direct current Ventilation flap Features : Louvres made of aluminum profile, flowfavouring and torsion-resistant Seals in reinforced rubber Profiled sheet steel frame galvanized 1.5 mm, dimensionally stable Delivered and assembled with profiled mounting plate Pre-assembled and pre-cabled motor : life length certified for cycles Motor cabling with RJ45 connector for easy connection to BlueKit system Motor with positive safety functioning in case of power failure MOUNTING Adjustment in the opening thanks to the mounting plate; possible mounting from outside or from the lift shaft. 4

NEW BUILDING Horizontal JK-180 HV Drawings and dimensions MOUNTING FROM THE ROOF Concrete ceiling Concrete ceiling Section B-B Section A-A MOUNTING FROM THE SHAFT Concrete ceiling Concrete ceiling

5 NEW BUILDING Horizontal JK-180 HV Drawings and dimensions MOUNTING FROM THE ROOF Concrete ceiling Concrete ceiling Section B-B Section A-A MOUNTING FROM THE SHAFT Concrete ceiling Concrete ceiling Section B-B Section A-A JK-180 HV Designation according to the ventilation flap opening (mm) BxH 360x x x x x x1200 Net ventilation surface (m 2 ) 0,10 0,23 0,41 0,62 0,90 1,22 Opening dimensions (mm) B1xH1 590x x x x x x1290 Mounting plate dimensions (mm) B2xH2 740x x x x x x1440 5

NEW BUILDING Horizontal JK-180 HVC CERTIFIED EN 12101-2 after Optimum insulation and protection under all weather conditions

optimized Prevents from condensation Ventilation flap and roof vent Features Ventilation flap JK-180 HV (see page 4) Roof vent:

galvanized sheet (Ref. JK-180 HVC-S) or aluminum (Ref.

Mounting of the ventilation flap from outside or inside the shaft Integration of the base plate during building insulation*

6 NEW BUILDING Horizontal JK-180 HVC CERTIFIED EN after Optimum insulation and protection under all weather conditions Product Integration to thermal insulation Protection against bad weather Complete and built-in solution Hygienic and energetic optimized Prevents from condensation Ventilation flap and roof vent Features Ventilation flap JK-180 HV (see page 4) Roof vent: Connector base to ventilation flap for flat roof Protects from rain Condensate recovery and evacuation Material: steel galvanized sheet (Ref. JK-180 HVC-S) or aluminum (Ref. JK-180 HVC-A) Thickness: 1,2mm Production: spot welding for the base plate spot welding and riveting for the cover MOUNTING Mounting of the ventilation flap from outside or inside the shaft Integration of the base plate during building insulation* Connection of ventilation flap (reference JK-180 HV) to the base plate thanks to predrilled holes Cover set up *The mounting of the roof vent can easily be done by a roofer but should not be part of the lift professional tasks. 6

NEW BUILDING Horizontal JK-180 HVC Section B-B Drawings and dimensions Section A-A Condensate outlet nozzle Flat roof upper layer Roof sealing Thermal insulation Concret ceiling JK-180 HVC

7 NEW BUILDING Horizontal JK-180 HVC Section B-B Drawings and dimensions Section A-A Condensate outlet nozzle Flat roof upper layer Roof sealing Thermal insulation Concret ceiling JK-180 HVC Designation according to the ventilation flap opening (mm) BxH 360x x x x x x1200 Net ventilation surface (m 2 ) 0,10 0,23 0,41 0,62 0,90 1,22 Opening dimensions (mm) B1xH1 590x x x x x x1290 Mounting plate dimensions (mm) B2xH2 740x x x x x x1440 Cover dimensions B3xH3 890x x x x x x1790 Base plate height (mm) L1* Cover height (mm) L Overall height of the roof vent (mm) L * other base plate heights available upon request 7

8 NEW BUILDING Horizontal JK-180 HVL Compact solution for optimal insulation and protection CERTIFIED EN after Product Integration to thermal insulation Complete and built-in solution Compact solution: ideal to optimize space Hygienic and energetic optimized Prevents from condensation Ventilation flap and roof vent with blades Features Ventilation flap JK-180 HV (see page 4) Roof vent with blades : Base plate for flat roof with interface to connect ventilation flap Protects from rain Ideal when lack of space : the louvre cover dimensions correspond to the base plate dimensions Condensate recovery and evacuation Material: steel galvanized sheet (Ref. JK-180 HVL-S) or aluminum (Ref. JK-180 HVL-A) Production: spot welding MOUNTING Mounting of the ventilation flap from outside or inside the shaft Integration of the base plate during building insulation* Connection of ventilation flap (reference JK- 180 HV) to the base plate thanks to pre-drilled holes Cover set up *The mounting of the roof vent can easily be done by a roofer but should not be part of the lift professional tasks. 8

NEW BUILDING Horizontal JK-180 HVL Section B-B Drawings and dimensions Section A-A Condensate outlet nozzle Flat roof upper layer Roof sealing Thermal insulation Concrete ceiling JK-180 HVL

9 NEW BUILDING Horizontal JK-180 HVL Section B-B Drawings and dimensions Section A-A Condensate outlet nozzle Flat roof upper layer Roof sealing Thermal insulation Concrete ceiling JK-180 HVL Designation according to the ventilation flap opening (mm) BxH 360x x x x x x1200 Net ventilation surface (m 2 ) 0,10 0,23 0,41 0,62 0,90 1,22 Opening dimensions (mm) B1xH1 590x x x x x x1290 Mounting plate dimensions (mm) B2xH2 740x x x x x x1440 Cover dimensions (mm) B3xH3 690x x x x x x1390 Base plate height (mm) L1* Cover height (mm) L Overall height of the roof vent (mm) L * other base plate heights available upon request 9

NEW BUILDING Horizontal TF (Thermo Flap) The all-in-one solution with insulation CERTIFIED EN

sides The insulated base plate prevents from condensate Ventilation and smoke extraction assured

Louvre windows + cover with blades Features : Base plate in fiberglass combined with a Louvre

ventilation on 4 sides Ideal when lack of space : the Louvre cover dimensions correspond to the

insulation* MAINTENANCE Visual maintenance from the shaft, easy access from the roof in case of

10 NEW BUILDING Horizontal TF (Thermo Flap) The all-in-one solution with insulation CERTIFIED EN after Product Integration to thermal insulation Built-in solution Ventilation opening on 4 sides The insulated base plate prevents from condensate Ventilation and smoke extraction assured regardless of wind direction Excellent heat transfer coefficient Base plate in fiberglass (GRP), Louvre windows + cover with blades Features : Base plate in fiberglass combined with a Louvre window Louvre window with electric motor Cover with blades protecting against bad weather and with ventilation on 4 sides Ideal when lack of space : the Louvre cover dimensions correspond to the base plate dimensions Insect-proof Resistant MOUNTING Integration of the base plate during building insulation* MAINTENANCE Visual maintenance from the shaft, easy access from the roof in case of repair. *The mounting of the roof vent can easily be done by a roofer but should not be part of the lift professional tasks. 10

NEW BUILDING Horizontal TF (Thermo Flap) Section B-B Drawings and dimensions Section A-A 450x450mm - 1 blade Flat roof upper layer Roof sealing Thermal Insulation 600x600mm - 2 blades Concrete

11 NEW BUILDING Horizontal TF (Thermo Flap) Section B-B Drawings and dimensions Section A-A 450x450mm - 1 blade Flat roof upper layer Roof sealing Thermal Insulation 600x600mm - 2 blades Concrete ceiling 800x800mm - 3 blades Designation according to the opening dimensions (mm) BxH TF 450x x x800 Net ventilation surface (m 2 ) 0,10 0,20 0,39 Base plate dimensions (mm) B1xH1 810x x x1160 Cover dimensions (mm) B2xH2 595x x x985 Base plate height (mm) L Cover height (mm) L Thermo Flap overall height (mm) L U-Value (W/m²K) 0,41 0,46 0,55 Number of blades

NEW BUILDING Vertical JK-180 HV-ALAS CERTIFIED EN 12101-2 after Vertical ventilation and protection, quite simply!

flap JK-180 HV (see page 4) Weather protection grille ALAS: Ventilation grille with fixed rain-repellent blades preventing the ingress of rain or snow into the ducting system.

12 NEW BUILDING Vertical JK-180 HV-ALAS CERTIFIED EN after Vertical ventilation and protection, quite simply! Product Flush installation Integration to the building thermal insulation Easy installation from the shaft or the machine room Ventilation flap with weather protection grille Features Ventilation flap JK-180 HV (see page 4) Weather protection grille ALAS: Ventilation grille with fixed rain-repellent blades preventing the ingress of rain or snow into the ducting system. A grid (fixed behind) protects against intrusion of birds. Blades : galvanised steel Grid : galvanised steel Mounting feet MOUNTING Vertical mounting in the wall shaft or in the machine room. Mounting of the ventilation flap and weather protection grille in the ventilation opening. Mounting from the shaft, thanks to the mounting plate of the ventilation flap and the grille mounting feet. 12

13 NEW BUILDING Vertical JK-180 HV-ALAS Drawings and dimensions Mounting plate B2xH2 Opening dimensions B1xH1 Flap Frame Flap opening BxH Inside Outside Inside Outside Inside view Outside view Section Alternative section JK-180 HV-ALAS Designation according to the ventilation flap opening (mm) BxH 360x x x x x x1200 Net ventilation surface (m 2 ) 0,10 0,23 0,38 0,56 0,77 1,03 Opening dimensions (mm) B1 x H1 590x x x x x x1290 Mounting plate dimensions (mm) B2 x H2 740x x x x x x

NEW BUILDING Vertical CERTIFIED EN 12101-2 S9-iVt-05 LF-MR and Tairmo-LF-MR after Combine ventilation, energetic efficiency and modern design Product Flush installation Integration to the building

Ug/Up/Uw) Anti breakage Mounting time reduced S9-iVt-05 Louvre window Features Aluminum profiles, thermally broken Glass blade frame (Tairmo) or sandwich panels* (S9-iVt-05) Air permeability, water

14 NEW BUILDING Vertical CERTIFIED EN S9-iVt-05 LF-MR and Tairmo-LF-MR after Combine ventilation, energetic efficiency and modern design Product Flush installation Integration to the building thermal insulation Excellent thermal performance :low coefficient of the glass heat permeability (coef. Ug/Up/Uw) Anti breakage Mounting time reduced S9-iVt-05 Louvre window Features Aluminum profiles, thermally broken Glass blade frame (Tairmo) or sandwich panels* (S9-iVt-05) Air permeability, water tightness and heat protection Anodised/powder coated Double or triple glazing Electric motor: 24VDC Opening angles: Maxi 90 (Tairmo) Maxi 84 (S9-iVt-05) Tairmo *S9-iVt-05 blades available in glass also upon request MOUNTING Vertical flush mounting in the wall shaft. The installation is done from the shaft thanks to mounting feet or a specific mounting plate. 14

NEW BUILDING Vertical S9-iVt-05 LF-MR and Tairmo-LF-MR Drawings and dimensions Outside view Inside Section Outside S9-iVt-05 LF-MR D e sig nati on ac cording to the 420x420 630x390 570x570 775x775

15 NEW BUILDING Vertical S9-iVt-05 LF-MR and Tairmo-LF-MR Drawings and dimensions Outside view Inside Section Outside S9-iVt-05 LF-MR D e sig nati on ac cording to the 420x x x x775 element dimensions BxH Net ventilation surface (m 2 ) 0,1 0,15 0,2 0,39 Opening dimensions (mm) B1xH1 450x x x x805 Panel Up-Value (W/m²K) 1,0 1,0 1,0 1,0 Coef. Uw (W/m 2 K) 2,5 2,3 2,3 2,1 Number of blades Outside view Inside Section Outside Tairmo-LF-MR Designation according to the 800x x x x815 element dimensions BxH Net ventilation surface (m 2 ) 0,11 0,15 0,20 0,40 Opening dimensions (mm) B1xH1 830x x x x845 Coef. Ug (W/m 2 K) 0,7 0,7 0,7 0,7 Coef. Uw (W/m 2 K) 1,9 1,8 1,7 1,6 Number of blades

MODERNISATION JK-190 Horizontal/Vertical CERTIFIED EN 12101-2 after The flexible solution for modernisations Product Non-integrated solution Surface mounting Do not decrease the ventilation surface

16 MODERNISATION JK-190 Horizontal/Vertical CERTIFIED EN after The flexible solution for modernisations Product Non-integrated solution Surface mounting Do not decrease the ventilation surface Can be adapted to all openings Easy ventilation flap mounting and motor maintenance Ventilation flap Features Louvres made of aluminum profile, flow-favouring and torsion-resistant Seals in reinforced rubber Profiled sheet steel frame galvanized 1.5 mm, dimensionally stable Pre-assembled and pre-cabled motor : life length certified for cycles Motor cabling with RJ45 connector for easy connection to BlueKit system Motor with positive safety functioning in case of power failure The additional 10 mm depth of the frame allows a wider ventilation surface (free movement of the blades and airflow increase between the blades) MOUNTING Fixing in the wall or the lift shaft slab thanks to the mounting frame. On both sides, the ventilation flap openings must be superior by a minimum of 30 mm of the ventilation openings. Installation possible in a corner with a specific mounting angle (sold as an accessory see page 18) 16

MODERNISATION JK-190 Horizontal/Vertical Section B-B Drawings and dimensions Section A-A Concrete ceiling Concrete ceiling JK-190* Ventilation flap opening (mm) H/B 360 530 700 860 1030 1200 360 0,1

17 MODERNISATION JK-190 Horizontal/Vertical Section B-B Drawings and dimensions Section A-A Concrete ceiling Concrete ceiling JK-190* Ventilation flap opening (mm) H/B ,1 0,15 0,2 0,25 0,3 0, ,16 0,23 0,3 0,37 0,45 0, ,21 0,31 0,41 0,5 0,6 0, ,26 0,38 0,51 0,62 0,75 0, ,31 0,46 0,61 0,75 0,9 1, ,37 0,54 0,71 0,87 1,05 1,22 *Standard dimensions in grey 17

MODERNISATION Horizontal JK-190 Slab/Corner CERTIFIED EN 12101-2 after Accessories for horizontal mounting Produkt Ventilation flap JK-190 with mounting angles Solution for the ventilation flap

18 MODERNISATION Horizontal JK-190 Slab/Corner CERTIFIED EN after Accessories for horizontal mounting Produkt Ventilation flap JK-190 with mounting angles Solution for the ventilation flap mounting in a corner of the shaft slab when space for fixing is not sufficient Ventilation Flap + mounting angles MOUNTING Flexible mounting according to the access to the ventilation opening 3 mounting angles: Fixing of angle corner 1 to the ventilation flap together with the supplied nuts Positioning of the ventilation flap including mounting angle 1 in front of the opening and screwmounting in the shaft slab Positioning of mounting angle 2 on the ventilation flap and screwmounting in the shaft wall

19 MODERNISATION Horizontal JK-190 Slab/Corner Section B-B Drawings and dimensions with mounting angles Section A-A Corner view / shaft headroom

20 FURTHER INFORMATION INTELLIGENT LIFT SHAFT SYSTEMS EUROPE-WIDE AVAILABLE 20

DICTATOR Lift Shaft System

DICTATOR Lift Shaft System The Modular Lift Shaft System, also for Retrofitting Certified According to EN 1090 A lift is becoming more and more important for daily life, not only in newly constructed buildings