OTTO Professional Guide 1. Bonded window systems for industry and trade
|
|
- Hubert Randall
- 6 years ago
- Views:
Transcription
1 OTTO Professional Guide 1 Bonded window systems for industry and trade
2 2
3 Orientation 3 Preface 3 Bonded window systems 4 System requirements 5 OTTOCOLL S Ideal for industry and trade Technical specifications 8-16 Security for a good feeling 10 Supplementary OTTO products OTTO Professional Guides 19 Preface Functional and maintenance-free the window that every property owner would like Maintenance-free windows were always right at the top of the list for property owners. The development of bonded windows doesn t just meet this wish but offers some other, quite fascinating options. Apart from the significant improvement of the thermal and noise insulation, the bonding allows attractive large area windows or slimmer frames, as required by current architectural trends. The fact that bonded windows show clear advantages in reducing break-ins in comparison to conventional manufacturing is another important plus point for the new technology.
4 4 Bonded window systems Direct glazing, the bonding of the insulating glass unit in a window sash made of wood, PVC or aluminium has become the state of the art. The additional strength resulting from the bonding offers many advantages: Attractive design options: Large area windows due to the use of more narrow frames The use of large glass areas Attractive manufacturing: Due to the bonding, less steel can be used in the frame Lower manufacturing costs Maintenance-free Attractive sales arguments: Improvement of the thermal and noise insulation Improved security from break-ins As far as adhesion to glass is concerned, silicone is unbeatable, as has been shown in the past when it has been used to construct glass façades for buildings. Its resistance to ageing and to moisture, in other words the function of the bond, has been documented for decades.
5 System requirements 5 Compatibility The bonding of glass panes is a manufacturing process where different materials are joined together. If you simply consider the variety of (painted) woods, plastics, metals and coatings used to make windows, including the glass and seals (i.e. the composite seals around the insulating glass units) and not least the sealing and bonding materials, then there can be no doubt that the compatibility of the individual components as well as any necessary use of a primer are decisive for manufacturing. Only systems which have been tested for adhesion and compatibility, where every single component has been clearly defined, can guarantee a flawless design. To guarantee quality, OTTO works together with several sectors; with the makers of window profiles and insulating glass units to test material compatibility, so as to prevent damaging interactions. The Rosenheim institute for window technology (ift) offers the VE 08/3 guidelines for bonded windows (a basis for the evaluation of bonded glazing systems). In addition to that, the German RAL quality institute offers the RAL GZ 716/1 guidelines. Both sets of guidelines are based on the European standards DIN EN and DIN EN System requirements: The decisive factor for a window to be flawless in the long term is the compatibility of all relevant materials. We thus recommend that all materials adjacent to the windows be checked for compatibility. To ensure that you have the latest information, please see the compatibility lists for composite edging materials on our website. There you will also find test certificates, practical information about using two-component materials as well as the varying options for the bonding positions. Please also note the recommendation on the use of primers in our technical data sheet.
6 6OTTOCOLL S 81 With OTTOCOLL S 81, OTTO offers a special, two component silicone for direct glazing both in drums or hobbocks for industrial manufacturing as well as in side by side cartridges for small series or single parts. The practical OTTOCOLL S 81 coaxial cartridge is OTTO s simple solution for on site work. Optimisation in series production In series production, bonding glass with OTTOCOLL S 81 enables significant room for optimisation. The economic benefits in series production come from the savings of time and material and the lower process costs which come from reducing the steel reinforcement: for plastic profiles with an installation depth of 80 mm, sash heights of 1.40 m are possible without steel reinforcement, as the bonding strengthens the sash. There is also a reduction in the risk of the glass breaking owing to the elastic properties of the silicone, which are always of benefit where stresses can arise. This helps first of all in the manufacturing process as the stress peaks provoked by classical glazing blocks no longer occur, but also during the subsequent use. The elastic adhesive reliably compensates for the differing thermal expansion/contraction of the parts due to the temperature difference between the inside and outside. Owing to the quick hardening of OTTOCOLL S 81 work on bonded parts can quickly proceed, while at the same time ensuring strong adhesion right from the start.
7 Ideal for industry and trade 7 Bonding when making single items & bonding on site Direct glazing, in other words bonding an insulating glass unit in a window sash made of wood, PVC or aluminium is not just the state of the art for series production, but it is also becoming ever more important for small series, when making single items or when renovating parts of windows on site. The benefits here are not so much the cost advantages as for series production, but above all the advantages for the end customer: Improved appearance due to the use of more narrow frames The option of using larger glass units Improved U values for the glazing unit Improved security from break-ins For small series or to make single units, OTTO offers OTTOCOLL S 81 in side by side cartridges. OTTOCOLL S 81 is also available in practical coaxial cartridges. The perfect solution for working on site. Coaxial cartridges have 2 chambers for the two material components but can still be used with standard guns for single component cartridges. 490 ml side-by-side cartridge With the 280 ml coaxial cartridge, two-component materials can be dispensed with standard guns for single component cartridges. For ease of use, we recommend the H 245 OTTO Hand operated Gun with its higher press force. 280 ml coaxial cartridge
8 8 Technical specifications Bonding positions The sealing and bonding materials for windows must have very particular properties while at the same time permitting fast production. For all types and positions of the various window designs, OTTO offers offers a highly specialised product with OTTOCOLL S 81. OTTOCOLL S 81 doesn t just impress with its excellent adhesion to wood, plastic, metal and glass, but is also offers properties which are ideally suited for production. For example, long skin forming time to fill cavities, rapid curing for short cycle times even with thick layers, extremely high tensile strength. The quality of a bond is not just determined by compatibility but also the by quality of the surfaces to be joined, i.e. their roughness, cleaning, preparation, coating, and by the joining process itself, i.e. positioning, pressing, pressing on just once etc. OTTO provides you with the option of consulting the details of your design with their application experts.
9 Technical specifications 9 Bonding at position 1 Bonding at position 6 Bonding at positions 2 and 6 for stepped glass Bonding on the glass edge or in the bottom of a rebate Legend: = OTTOSEAL S 110/S 120 = OTTOCOLL S 81 or OTTOCOLL S 81 with OTTOTAPE Duo 20 (pictures 1 to 4) = Novasil S 42/OTTOSEAL S 9
10 10 Security for a good feeling Increased protection from break-ins with bonded windows During a break-in it is not just money and valuables which are lost but also that feeling of security. Almost 75 % of offenders need just a simple tool to almost noiselessly lever open windows and doors. Extract from EN (2011) in connection with DIN EN 356 EN 1627:2011 Glass to DIN EN 356 Tool Manual test time EN 1630:2011 Resistance time max. test time RC 1n No requirement No manual test, only recommended if no ground-level access is possible - - RC 2n No requirement RC 2 P4 A 3 x ball drop from 9,0 m height Protection: From violence and a simple tool, e.g. screwdriver, wedge, pliers 3 min 15 min RC 3 P5 A 9 x ball drop from 9,0 m height In addition: Two screwdrivers and crowbar and hand drill 5 min 20 min RC 4 P6 B Axe blows In addition: Sawing tools, striking tools such as an axe, crowbars, hammers, battery-powered drills, chisels 10 min 30 min RC 5 P7 B Axe blows In addition: Electrical tools such as drills, jigsaws or reciprocating saws and angle grinders 15 min 40 min RC 6 P8 B over 70 axe blows More powerful electrical tools than class RC 5 20 min 50 min Windows bonded with OTTOCOLL S 81 offer security The all round bonding of the insulating glass in window sashes offers significantly better protection from break-ins. Windows bonded with OTTOCOLL S 81 have already been successfully tested against the requirements in EN to RC 2 and RC 3. Please also see the expert opinion provided by the development and test laboratory for wood technology (eph) in Dresden for the execution of glass bonding systems for break in resistant, wooden windows in resistance class RC 2 on our web site.
11 11
12 12 Technical specifications 1. Preparation of the bonding surfaces OTTO Cleanprimer (1226 or 1216 see the compatibility list) and a clean cloth Wet the cloth with OTTO Cleanprimer Prepare the profile s bonding area with OTTO Cleanprimer Remove adhesive labels from the insulating glass Clean the sealed edge with OTTO Cleanprimer and a cloth
13 Technical specifications 13 The procedure 2.1. Preparation to apply the adhesive with coaxial cartridges Insert the coaxial cartridge into the gun Apply pressure without a static mixing nozzle, until material comes out of the opening Wipe off the material and fit the MGQ D static mixing nozzle Fill the static mixing nozzle with adhesive and check that the mixture is homogeneous
14 14 Technical specifications 2.2. Preparation to apply the adhesive with side by side cartridges You can find these instructions and the video showing the process on our website. Fit a side by side cartridge into the gun Apply pressure without a static mixing nozzle, until material comes out of both openings Wipe off the material and fit the static mixing nozzle Fix the static mixing nozzle with the union nut Fill the static mixing nozzle with adhesive and check that the mixture is homogeneous
15 Technical specifications 15 For particularly narrow bonded joints, a standard cartridge nozzle can be fixed to the static mixing nozzle for the side by side cartridges, via a special screw on adapter. By shortening or flattening the tip, the nozzle can be adjusted for the shape of the bonded joint concerned. Put the screw on adapter onto the static mixing nozzle Static mixing nozzle with a screw on adapter Put the standard cartridge nozzle onto the static mixing nozzle with its screw on adapter Component parts: OTTO Static mixing nozzle MFQX 10 24T OTTO Screw on adapter GEWINDE OTTO Standard nozzle for cartridges Düse STA107 Static mixing nozzle with screw on adapter and standard nozzle for cartridges
16 16 Technical specifications 3. Bonding Fitting the glass pane Blocking Filling the bottom of the rebate with adhesive Fitting the glass retaining strips Fitting the glazing seal
17 Supplementary OTTO products 17 To use OTTOCOLL S 81 OTTO Cleanprimer 1226 The universal cleanprimer Cleans and improves the adhesion on non-absorbant substrates (metals, plastics, glass, etc.) OTTO Primer 1216 The primer for natural stone and metal Primer to improve the adhesion on natural stone, metallic materials and some plastics OTTO Compressed Air Gun P 495 DP Compressed air gun for the use of side-by-side cartridges 490 ml. Special pistol for increased product discharge (14.4 Volt NiMH) compliant with OTTO Accumulator Gun Power Push 7000 MP RoHS High power accumulator gun for processing side-by-side 490 ml cartridges (with 2 NiMH batteries: 14.4 volt/1.4 Ah) and charger: charging time approx. 50 minutes). Weight of gun including battery: approx. 3.9 kg OTTO Hand-operated Gun H 245 Hand-operated gun with a press capacity of 5 kn for the application of highly viscous materials. For 280/290/300/310 ml cartridges. With smooth driving rod. OTTOTAPE Duo 20 The double-sided adhesion tape Double-sided adhesion tape with closed-cell PE-Copolymer foam
18 18 Supplementary OTTO products OTTO Static mixing nozzles for side-by-side cartridges for 2-comp. silicone products OTTO Static mixing nozzles for coaxial cartridges MGQ 10-16D for 2-comp. silicone products For the sealing of glass rebates on wooden windows to DIN 18454, stress group E. OTTOSEAL S 110 PREMIUM The premium neutral silicone Neutral-curing 1-component silicone sealant, MEKO-free OTTOSEAL S 120 PREMIUM The premium alkoxy window silicone Neutral-curing 1-component silicone sealant based on alkoxy OTTOSEAL S 112 Window bar filler 1-component silicone sealant based on alkoxy Please also see our products all around the installation of RAL windows.
19 OTTO Professional Guide OTTO PROFESSIONAL GUIDE OTTO Professional Guide OTTO Professional Guide OTTO Professional Guide OTTO Professional Guide OTTO Professional Guide OTTO Professional Guide OTTO Professional Guide 1 OTTO Professional Guide OTTO Professional Guide OTTO Professional Guides 19 How to perfectly seal floor coverings Perfect prevention & repair of mould In building and façade construction perfect sealing and bonding Joints perfectly formed How to choose the perfect adhesive Part n Part n Part n Part n Part n Perfectly Jointing Tiles and Natural Stone Perfect assembling of timber glass-composite units How to waterproof wetrooms perfectly Mirrors Perfect Sealing and Bonding How to make perfect joints in natural stone Part n Part n Part n Part n Part n Bonded window systems for industry and trade For more information on the subject of bonding wood, metal and glass, please see our High quality connections brochure. info-material-online-order High-quality connections made of wood, metal and glass Part n
20 20 1 OTTO Head office Tel.: Fax: info@otto-chemie.com From UK: Your specialised dealer: OTTO Technical Service Tel.: Fax: tae@otto-chemie.de OTTO Order processing Tel.: Fax: mab@otto-chemie.de In order to ensure a quick and correct handling of your orders we would like to ask you to send them by fax or . Thank you in advance for your cooperation. Notes: The information in the present document corresponds to the status quo on going to print, refer to the index. With a new edition this edition becomes invalid. Due to the many possible influences during and after application, the customer always has to carry out trials first. Please observe the respective technical data sheet! This information is available on the Internet at Errors and typographical errors are excepted. For further information please contact: Hermann Otto GmbH Krankenhausstr Fridolfing, GERMANY Tel.: Fax: info@otto-chemie.de Internet: Index: GB Hermann Otto GmbH 2017
OTTO Professional Guide. Perfect assembling of timber glass-composite units
Perfect assembling of timber glass-composite units 2 THE OTTO BUILDING WITH TIMBER-GLASS-COMPOSITE UNITS Photo credits: North German Centre for Sustainable Construction, Verden 9999868 HGV-Elemente perfekt
More informationOTTO Professional Guide. Mirrors Perfect Sealing and Bonding
Mirrors Perfect Sealing and Bonding 2 For your information 3 Preface 3 Not all mirrors are created equal 4 Installing flat mirrors 5-7 Sealing mirrors 8-9 Recommended OTTO products 10-11 Professional accessoires
More informationOTTO Professional Guide. How to apply adhesives perfectly
OTTO Professional Guide How to apply adhesives perfectly A 265 OTTOCOLL TopFix The ultrafast fixing adhesive For powerful bonding of absorbent materials OTTOCOLL TopFix is an adhesive based on acrylate
More informationOTTO Professional Guide. How to waterproof wetrooms perfectly
OTTO Professional Guide How to waterproof wetrooms perfectly For your information 3 Preface 3 Stress classes 3 The OTTOFLEX Sealing Strip 4-5 The OTTOFLEX Protective Coating 6 The OTTOFLEX Slurry Seal
More informationSuitable for large-area facades, commercial properties, conservatories, extensions plus detached, semi-detached and terraced houses.
Timber-Glass-Composite elements (TGC) Architecture is based on three principles: Firmitas, Utilitas and Venustas. Vitruv, Roman architect Naturalness, energy efficiency and structural flexibility: uniglas
More informationS S 9000 GEALAN s new system platform SYSTEMATIC INNOVATION
S 9000 GEALAN s new system platform + + Heat-insulating + + Flexible + + Solid + + Innovative + + Design-oriented + + RAL-tested S 9000 SYSTEMATIC INNOVATION Convincing arguments Entirely future-proof
More informationHygienic cladding solutions. the complete internal cladding solution
Hygienic cladding solutions the complete internal cladding solution Hygienic cladding range overview Our range of sheets, prof iles and adhesives are made to industry leading standards to meet all customer
More informationSika Fenestration Systems Structural Glass Bonding
Sika Fenestration Systems Structural Glass Bonding Fenestration Facades Fenestration Insulating Glass Fenestration Advantages of Bonding - Improvement of thermal insulation up to 20 % - Up to 30 % more
More informationSaratoga SIL3004 Silicone Sealant Techical Data Sheet Universal Anti-mould
Saratoga SIL3004 Silicone Sealant Techical Data Sheet Universal Anti-mould Saratoga SIL3004 is an acetic one-component silicone sealant, that cures quickly thanks to the atmospheric humidity, creating
More informationHygienic Cladding Solutions. White, Pastel & Vibrant Colours. Satin & Gloss Ranges
Hygienic Cladding Solutions White, Pastel & Vibrant Colours Satin & Gloss Ranges The complete cladding solution. A quality, cost efficient, high performance hygienic wall and ceiling system that you can
More informationGlassWin System. Structural glazing with PVC-U profiles
GlassWin System Structural glazing with PVC-U profiles Environment Our window profiles are stabilised with eco friendly calcium/zinc instead of lead. This means not only better protection for the environment,
More informationSikaflex 221 is a high-adhesion, polyurethane-based sealing compound for Low-odour
GLUING AND RIVETING Sikaflex 221, black Elastic Sikaflex 221 is a high-adhesion, polyurethane-based sealing compound for Low-odour connecting and overlapping joints, apron panels, trims, floor assemblies
More informationOTTO Manual for Professionals. How to seal and bond perfectly from A to Z
OTTO Manual for Professionals How to seal and bond perfectly from A to Z Acid-resistant sealing to Building silicone product code (in alphabetical order) in the General catalogue for building products
More informationFrequently asked questions about Alcolin PU Sealant & Adhesive
Frequently asked questions about Alcolin PU Sealant & Adhesive 1. What is a grab adhesive? This is an adhesive designed with a strong wet tack which enables the adhesive to grab or hold the substrates
More informationOTTOSEAL S100 OTTOSEAL S105
SILICON SEALANTS AND COMPLEMENTARY PRO- DUCTS OTTO-CHEMIE FOR THE SEALING OF FIL- LET AND EXPANSION JOINTS OTTOSEAL S100 OTTOSEAL S105 Acetic-based single component curing silicone sealants Acetic-based
More informationWATERPROOFING CONSTRUCTION JOINTS
WaterproofingSystems WATERPROOFING CONSTRUCTION JOINTS Area waterproofing Backing rod KÖSTER Joint Sealant FS-H KÖSTER FS Primer 2C Contents Basics Connective, loadable and resilient: Joints in building
More informationThe TKI success kit. The excellently thought-out aluminium profi le system for windows, doors and façades.
The TKI success kit The excellently thought-out aluminium profi le system for windows, doors and façades. Presented by MKF Metallbaukontor Frankfurt GmbH More than 40 years of excellent system engineering
More informationProducts PVC-ALU-WOOD
ducts PVC-ALU-WOOD Products PVC-ALU-WOOD Products PVC-ALU-WOOD Products PVC-ALU-WOOD Products PVC-ALU-WOOD Products PVC-A Products PVC-ALU-WOOD PVC PROFILES Ideal 4000 02 5 chamber system 70 mm depth Uw
More informationWE VE GOT YOU COVERED VISIT OBEX AT
WE VE GOT YOU COVERED VISIT OBEX AT WWW.OBEXUK.COM WE VE GOT YOU COVERED OBEX IS COMMITTED TO PROVIDING OUR GLOBAL CLIENTS WITH THE MOST COMPREHENSIVE EPDM MEMBRANE SYSTEM A COMPANY WITH VISION As global
More informationDynamic Bonding Systems B.V. A division of Dutch Bonding Group B.V.
for the bonding of facade cladding with KOMO-certified bonding system Dynamic Bond METALS - HPL - FIBRECEMENT Dynamic Bond For panels up to the maximum diagonal. Based on MS-hybrid-polymers, one component.
More informationMapefix PE Wall. Chemical anchor for masonry and light loads
Mapefix PE Wall Chemical anchor for masonry and light loads European Technical Approval ETAG 029 M8 M12 AREAS OF USE Mapefix PE Wall is an adhesive for chemically anchoring metal bars in holes made in
More informationMapei systems for radiating floor heating with high thermal efficiency
Mapei systems for radiating floor heating with high thermal efficiency PRODUCTS FOR CERAMIC TILES AND STONE MATERIAL ADHESIVES SEALANTS CHEMICAL PRODUCTS FOR BUILDING III MAPEI systems for radiating floor
More informationAESTUVER fire-protection mastic For the AESTUVER expansion joint M
fermacell AESTUVER product data sheet For the AESTUVER expansion joint M Product is an elastic RTV-1 silicone combined with halogen-free fire retardants. Silicone is a versatile elastomer which is mainly
More informationFootfall sound dampening system for wood flooring
System Product Data Sheet Edition 2011-01_1 Sika AcouBond -System Sika AcouBond -System Footfall sound dampening system for wood flooring Construction System Description Uses Characteristics / Advantages
More informationTechnical data sheet StoSilent Board 310
Acoustic panel made of expanded glass granulate for suspended ceiling and wall structures Characteristics Areas of application interior for suspended ceiling and wall structures fixing with screws and
More informationhüma PARKETTSYSTEM GmbH INSTALLATION GUIDE
hüma PARKETTSYSTEM GmbH INSTALLATION GUIDE www.huema.co.uk Content Content GENERAL INFORMATION... 4 INSTALLATION NOTES... 6 ACCLIMATISATION... 6 CHECK FOR FAULTS IN THE MATERIAL... 6 REQUIREMENTS FOR
More informationA Product of Sudhakar Pipes & Fittings. upvc FRAMES
A Product of Sudhakar Pipes & Fittings upvc FRAMES Your window to the world. Between Is something that connects you to the world. It s an interface or medium that brings you closer to the practical world.
More informationSECTION JOINT SEALANTS PART 1 - GENERAL 1.01 RELATED DOCUMENTS
SECTION 07-9200 - JOINT SEALANTS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationProduct Data Sheet Edition 25/01/2006. Sikasil WS-305. Product Description. Uses. Characteristics / Advantages
Product Data Sheet Edition 25/01/2006 Identification no: 02 05 01 14 001 0 000003 Sikasil WS-305 Sikasil WS-305 1-Part Silicone Weatherseal for Structural Glazing Product Description Uses Sikasil WS-305
More informationNow our house. saves soooo. much energy! T h e N e w G e n e r a t i o n Energy Saving. S y s t e m. The Quality Profile
Now our house saves soooo much energy! T h e N e w G e n e r a t i o n Energy Saving S y s t e m The Quality Profile based on our new SOFTLINE 82 profile system improve the energy efficiency of just any
More informationTechnical data sheet StoSilent Board 110
Acoustic panel made of expanded glass granulate for suspended ceiling and wall structures Characteristics Areas of application interior for suspended ceiling and wall structures fixing with screws and
More informationPREMIDOOR 88. Lift/sliding door system for the largest possible openings and maximum passage of light.
PREMIDOOR 88 Lift/sliding door system for the largest possible openings and maximum passage of light. THE NEW SIZE. UNIQUE PERSPECTIVES. SUPERIOR TECHNOLOGY. PremiDoor 88 lets you experience an all new
More informationConstruction. 1-part high performance sealant for flooring. Product Description. Environmental Information. Product Data Sheet Edition _1
Product Data Sheet Edition 2012-03_1 1-part high performance sealant for flooring Product Description Sikaflex PRO 3 is a one part, moisture curing, elastic joint sealant with high mechanical resistance.
More informationChannel Drain Shower Base. Aqua Line pro. Installation Instructions
Channel Drain Shower Base. Aqua Line pro Installation Instructions 02 JACKOBOARD Aqua Line pro System components a JACKOBOARD Aqua Line pro b JACKOBOARD Aqua Line pro - Horizontal Drain (Art. No. 4510370)
More informationTROCAL PremiDoor 88. The lift/sliding door system.
TROCAL PremiDoor 88. The lift/sliding door system. The new dimension. Unique perspectives. Superior technology. PremiDoor 88 lets you experience an all new feeling for living. Whether green nature or urban
More informationTHE COMPLETE FAÇADE SOLUTION ADHESIVES AND WEATHER SEALING
ADHESIVES AND WEATHER SEALING CONTENT 3 Meet the Team 4 Structural Glazing 6 Insulating Glass 8 Joint Sealing 10 Fire Rated Systems 12 Membran EPDM System 14 Balustrade Adhesive 16 Ventilated Rainscreen
More informationBuilding Systems. 1-Part Silicone Weatherseal for Structural Glazing. Product Description. Product Data Sheet Edition_1, 2009 Sikasil WS-305 CN
Product Data Sheet Edition_1, 2009 CN Building Systems 1-Part Silicone Weatherseal for Structural Glazing is a neutral, 1-part, moisture curing, elastic joint sealant Product Description based on silicone.
More informationLUX ELEMENTS -TUB-BOL shower base elements
Page 1/6 Product Description LUX ELEMENTS -TUB-BOL are special shower base elements for the substitution of bath tubs. The shower base elements consist of a hard foam core of expanded polystyrene with
More information1-part elastic joint sealant and multipurpose adhesive
Product Data Sheet Edition 31/10/2006 Identification no: 02 05 01 01 005 0 000001 1-part elastic joint sealant and multipurpose adhesive Construction Product Description Uses Characteristics / Advantages
More informationPRODUCT DATA SHEET Sikaflex PRO-3 WF
PRODUCT DATA SHEET 1-PART HIGH PERFORMANCE SEALANT FOR FLOORING DESCRIPTION is a 1-component, moisture-curing, elastic joint sealant with high mechanical and chemical resistance. USES Sikaflex PRO-3 is
More informationHigh viscous (thixotropic) elastic adhesive for wood flooring
Product Data Sheet Edition 26/08/05 Identification no: 02 05 02 03 001 0 000001 High viscous (thixotropic) elastic adhesive for wood flooring Construction Product Description Uses Characteristics / Advantages
More informationaluplast - Specialist for window and door systems IDEAL MORE LIGHT - MORE LIVING COMFORT
aluplast - Specialist for window and door systems IDEAL MORE LIGHT - MORE LIVING COMFORT www.aluplast.com.pl IDEAL 4000 classic-line IDEAL 4000 The IDEAL 4000 system represents a new generation of window
More informationConstruction. Solvent free elastic adhesive for Wood Flooring. Product Description. Product Data Sheet Edition _1. 1 SikaBond -52 Parquet 1/6
Product Data Sheet Edition 2012-07_1 Solvent free elastic adhesive for Wood Flooring Construction Product Description Uses Characteristics / Advantages is a one component, solvent free, fast curing elastic
More informationReal Brick Cladding. Iso Klink Pur. Brick Panel System Catalogue
Iso Klink Pur Brick Panel System Catalogue 1 BRICK CLADDING PANEL SYSTEM Combination of high performance pur insulation and brick cladding, creating durable and aesthetic system which is quick and easy
More informationFIRE PROTECTION AND PERFORMANCE DRY LINING BOARD THE ULTIMATE IN FIRE PROTECTION! 91 mins fire integrity and 86 mins fire insulation on 9mm board
THE ULTIMATE IN FIRE PROTECTION! 91 mins fire integrity and 86 mins fire insulation on 9mm board + Euroclass A1 Non-combustible FIRE PROTECTION AND PERFORMANCE DRY LINING BOARD Magply Fire PASSIVE FIRE
More informationTPS Thermo Plastic Spacer
contact optimize your products www.bystronic-glass.com sales@bystronic-glass.com Errors and technical modifications reserved 09.10 TPS Thermo Plastic Spacer The most advanced solution for efficient and
More informationfor the master tradesman Setcrete Product Guide
Professional Flooring products for the master tradesman Setcrete Product Guide Professional flooring products for the master tradesman Floor Levelling Compounds SETCRETE Floor Levelling Product Selector
More informationcero by Solarlux cero by Solarlux cero opens rooms with extensive glass panels: impressive transparency dissolves the line between inside and outside. As a brand of Solarlux, the leading supplier in the
More informationINSTALLATION INSTRUCTIONS
1 of 6 INSTALLATION INSTRUCTIONS IMPORTANT! Store the floorboards at room temperature for at least 48 hours, still in their packaging, prior to commencing installation. Ideal room temperature is 18-22
More informationThe panels are made of Polyurethane with an acrylic surface giving the panel a very natural appearance.
Summer Brochure 2012 The panels are made of Polyurethane with an acrylic surface giving the panel a very natural appearance. Rockwood has been manufacturing decorative mouldings for the past 16 years.
More informationEllure Tile Look Walls
Ellure Tile Look Walls Ellure Tile Look Walls - FITTING INSTRUCTIONS Included in this package: Other equipment that may be required 1 x Corner Flashing Drill 2 x Side finishing trim Adhesive application
More informationBuilding boards interior. Things to know and technology
Building boards interior Things to know and technology GB wedi products and systems are of a high standard of quality and have received numerous certifications throughout Europe. 2 Contents Contents Technical
More informationEasylationWall. External Wall Insulation System. bringing european innovation
EasylationWall External Wall Insulation System bringing european innovation EasylationWall... the new External Wall Insulation System using brick slips for stunning façades. EXTERNAL WALL INSULATION (EWI)
More informationheroal D 92 UD Front door system
heroal D 92 UD Front door system Door system Top-quality materials, technical solutions fine-tuned to the smallest detail and a wide variety of design options distinguish the efficient technology available
More informationSormat ITH-Pe PRODUCT DATA SHEET. ITH-Pe - POLYESTER BASED RESIN STYRENE FREE. Polyester based injection resin, styrene free. ITH 165 Pe art.
ITH 165 Pe art. 72900 Application in noncracked concrete ITH 300 Pe art. 72940 ITH 410 Pe art. 72941 Content Page Product description 2 Properties and benefits 2 Sample applications 2 Applications and
More informationAlveo Adhesive Coating. Sekisui Alveo foams tape carriers for energy-efficient buildings
Alveo Adhesive Coating Sekisui Alveo foams tape carriers for energy-efficient buildings Allowing optimization and offering innovative application solutions, Sekisui Alveo foams reduce both energy consumption
More informationInjection Adhesive VM-PY
Cartridge VM-PY 410 Coaxial cartridge Content: 410ml Range of loading: 0,3 kn - 39,4 kn Concrete quality: C20/25 - C50/60 Masonry: Solid brick, Hollow block Description The Injection Adhesive is a polyester-resin
More informationMaking Your Own Interior Storm Windows
Making Your Own Interior Storm Windows Windows are great for letting in sunlight during the winter to heat your home, but at night an under-insulated window will usually lose more heat than it lets in
More informationImpact Protection Slabs and Sports Pavement Slabs
Storage of EUROFLEX Products and adhesive cements EUROFLEX products should normally be stored in dry areas at constant temperature above 10 C. If stored below 10 C, store the slabs at the installation
More informationSTEP UP SHOWER BASE INSTALLATION GUIDE FOR TIMBER AND CONCRETE FLOORS
GUIDE FOR TIMBER AND CONCRETE FLOORS EDITION: APRIL 2016 IMPORTANT: This guide is for the installation of a Step Up shower base on a timber or concrete floor. If you require a walk in (flush with floor)
More informationHOW TO: INSULATE YOUR HOME AND UNDERSTAND U-VALUES GTEC THERMAL BOARD WITH PLASTERBOARD
HOW TO: INSULATE YOUR HOME AND UNDERSTAND U-VALUES WITH PLASTERBOARD GTEC THERMAL BOARD 1 BUILDING INSULATION THE REGULATIONS Building regulations are in place to drive improvements in thermal efficiency,
More informationThe more intelligent way to insulate: Thermix TX.N plus Warm edge spacers for insulating glass
www.thermix.de The more intelligent way to insulate: Thermix TX.N plus Warm edge spacers for insulating glass Thermix TX.N plus this is warm edge 2 Thermix TX.N plus our best warm edge ever Thermix warm
More informationThe window of the future
Efficiency, thermal insulation, impervious to driving rain, environmental protection, recyclability, weather resistance, longevity, energy The window of the future System bluevolution A SYSTEM OF SALAMANDER
More informationalternative» The real alternative to natural stone and tiles! «
alternative» The real alternative to natural stone and tiles! « CERAMIN the new ceramic-like composite The CERAMIN components are bonded together at low temperatures and thus in an energy-saving and low
More information1-part polyurethane pourable self levelling floor joint sealant
Product Data Sheet Edition 29/03/2007 Identification no: 02 05 01 01 018 0 000001 1-part polyurethane pourable self levelling floor joint sealant Construction Product Description Uses Characteristics /
More informationSolar Solutions Reliable and Process Optimised Solar Adhesive Systems. Innovation & Consistency. since 1910
Reliable and Process Optimised Solar Adhesive Systems Innovation & Consistency since 1910 Adding Value with Adhesives and Sealants for Assembly and Installation Content Sika takes pride in delivering products
More informationSolar Solutions Reliable and Process Optimised Solar Adhesive Systems. Innovation & Consistency. since 1910
Reliable and Process Optimised Solar Adhesive Systems Innovation & Consistency since 1910 Adding Value with Adhesives and Sealants for Assembly and Installation Sika takes pride in delivering products
More informationNon-sag, ultra low modulus, neutral cure silicone sealant for pavements
Product Data Sheet Edition:21/02/2012 Identification no: 020505052020000001 Sikasil 728 NS Sikasil -728 NS Non-sag, ultra low modulus, neutral cure silicone sealant for pavements Construction Product Description
More informationConstruction Sealants 101 Making the Connections. Building Enclosure Council Austin October 3, 2012
Construction Sealants 101 Making the Connections Building Enclosure Council Austin October 3, 2012 RPM Incorporated Consumer Consumer Industrial 2 Topics Covered Overview of various types of construction
More information1-part Elastic Sealants for Joints Exposed to Chemicals
Product Data Sheet Edition 01 March 2017 1-part Elastic Sealants for Joints Exposed to Chemicals Product Description / Uses is a one part, moisture curing, elastic joint sealant which is used in areas
More informationVESDURA VINYL PLANKS 7.5MM WPC CLICK LOCK - AMERICANA COLLECTION
VESDURA VINYL PLANKS 7.5MM WPC CLICK LOCK - AMERICANA COLLECTION Before You Start Click lock vinyl plank flooring is normally laid without adhesive. Before installation, planks must be allowed to acclimatize
More informationMore space, more light, a better quality of life: The high insulated folding sliding doors from Schweizer.
More space, more light, a better quality of life: The high insulated folding sliding doors from Schweizer. 2 An easy perspective: Folding sliding doors enable greater transparency. Whether for a modern
More informationData Sheet 1806 Englisch
Data Sheet 1806 Englisch Silicate Interior Paint ELF 1806 Silikat-Innenfarbe ELF 1806 low emission, solvent and plasticizer free, dull matt, wet abrasion resistance class 3, suitable for allergy sufferers,
More informationFlooring and Acoustic Damping Sikafloor Marine
Acoustic Systems Primary Deck Coverings When fitting carpets, vinyl etc. the deck needs to be level. Sika offers a wide range of levelling compounds, each with different benefits so that an ideal compound
More informationWaterproofing construction Joints
Waterproofing construction Joints Area waterproofing Backing rod KÖSTER Joint Sealant FS-H KÖSTER FS Primer Contents Basics Connective, loadable and resilient: Joints in building construction 3 Joint types
More informationAS VARIED AS YOUR WINDOW CONNECTIONS: ISO 3 -WINDOW SEALING SYSTEM
AS VARIED AS YOUR WINDOW CONNECTIONS: ISO 3 -WINDOW SEALING SYSTEM 2 PROLOGUE \ 3 MEET THE INCREASINGLY DEMANDING REQUIREMENTS OF MODERN WINDOW SEALING! The versatility and individuality in the planning
More informationOver 20 years experience of high quality commercial hygienic wall and ceiling cladding supplies. Quality you can trust
Over 20 years experience of high quality commercial hygienic wall and ceiling cladding supplies Quality you can trust In association with - the hygienic cladding specialists HPS is proud to announce the
More informationIssue 8 www.gekko-adhesives.com GEKKO... REVOLUTIONARY TIME AND COST SAVING ADHESIVE SOLUTIONS CONTENTS Gekko Gun Adhesive Systems 04 G1 Gun 06 G2 Gun 08 Woodstikk 10 Wood Floor Adhesive 12 Claddstikk
More informationVHB Tapes. Design Guide for Sign Assembly. Proven worldwide. Now even more versatile for more sign applications, more surfaces.
VHB s Design Guide for Sign Assembly Proven worldwide. Now even more versatile for more sign applications, more surs. 1 Saving time, enhancing appearance for more than 20 years... Enhance design and appearance...
More informationBill of Quantities PANDOMO TerrazzoBasic PANDOMO BG/BW TerrazzoBasic two layers on separating sheet or insulation
Bill of Quantities PANDOMO TerrazzoBasic PANDOMO BG/BW TerrazzoBasic two layers on separating sheet or insulation General remarks Products used: The tenderer shall include with the offer technical data
More informationTechnical Data Sheet Sto-RFP
Organic, cement-free reinforcing compound/base coat, ready-to-use Characteristics Properties Information/notes Exterior and interior On to organic and mineral substrates As a reinforcing compound for StoTherm
More informationTROCAL PremiDoor 88. The lift/sliding door system.
Maximum technical values and optimal economy. PremiDoor 88 provides the perfect balance between static properties and thermal insulation. Elements up to 2.90 m high and a heat transfer coefficient of U
More informationApprox. Weight in g/m²
TECHNICAL DATA SHEET SYSTEXX Active Logo L65 Innovative glass fabrics for walls and ceilings Properties / Typical application The SYSTEXX Active Logo L65 wall covering is woven of glass yarn, and combines
More informationAssembly Instruction. wedi Fundo Primo Shower System
Assembly Instruction wedi Fundo Primo Shower System Assembly Instructions wedi Fundo wedi Fundo Shower System-Primo Overview & General Product Description of the wedi Fundo Shower Systems All wedi Waterproof
More informationConstruction. Universal anchoring adhesive. Product Description. Tests. Product Data Sheet Edition _1. 1 Sika AnchorFix S 1/6
Product Data Sheet Edition 2014-01_1 Sika AnchorFix S Sika AnchorFix S Universal anchoring adhesive Product Description Styrenated polyester based two part anchoring adhesive. Construction Uses Characteristics
More information3-part thixotropic epoxy patching mortar
Product Data Sheet Edition 28/08/2006 Identification no: 02 04 02 03 001 0 000044 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages Sikadur -41
More informationACOUSTIC INSULATION UNDER SCREED made from recycled rubber granules
ACOUSTIC INSULATION UNDER SCREED made from recycled rubber granules SOLUTIONS FOR CONSTANT LOADS UP TO 20 t/m² MADE IN GERMANY Engineered solutions against noise. DAMTEC Project DC Tower Vienna, Austria
More informationEasy to Use A7 Saves You Time and Money
ADHESIVE ANCHORING SPECIALISTS Easy to Use Saves You Time and Money DESCRIPTION/SUGGESTED SPECIFICATIONS* Fast Dispensing, Fast Curing The acrylic resin and hardening agent are completely mixed as they
More information3 700-Series Hybrid Products:
3 700-Series Hybrid Products: 3M 3M 3M Technical Data December, 2009 Product Description 3M 700-Series Hybrid Sealant and Hybrid Adhesive Sealant products are one component, moisture curing products which
More informationConstruction. Solvent Free Elastic Adhesive for Wood Flooring. Product Description
Construction Product Data Sheet Edition: 21/11/2012 Identification no: 02 05 02 01 200 0 000009 Version: GCC Solvent Free Elastic Adhesive for Wood Flooring Product Description Uses Characteristics / Advantages
More informationThe Future has never looked so bright.
The Future has never looked so bright. There has never been a better time to replace yourw indows nd it s no coincidence, that in recent years, so many people have decided to replace their Aexisting windows
More information84 Lapping & Jointing 86 Service Pipe Penetrations 87 Sealing to Cavity Wall Constructions 88 Protecting Membranes System Components.
84 Lapping & Jointing 86 Service Pipe Penetrations 87 Sealing to Cavity Wall Constructions 88 Protecting Membranes 90 System Components installation/ SYSTEM COMPONENTS INSTALLATION ADVICE LAPPING and JOINTING
More informationICD High Performance Coatings. Contractor Manual
ICD High Performance Coatings Contractor Manual OPACI-COAT-300 WATER-BASED SILICONE GLASS SPANDREL AND WALL CLADDING APPLICATION AND INSTALLATION GUIDE November 2016 1 Although ICD has made every effort
More informationFreedom One-Piece Barrier Free Showers Installation Instructions
Tools & Materials you might need for proper installation Materials: 2-1 gallon buckets of solid wood flooring adhesive or 100% silicone adhesive (non-shrink) 20-1.25 wood screws 1-5 gallon bucket (to mix
More informationHOW TO: BOARD BATHROOMS, WET ROOMS & SHOWERS
HOW TO: BOARD BATHROOMS, WET ROOMS & SHOWERS 1 FOCUS ON GETTING IT RIGHT As with any building project the quality of finish is determined by the foundation upon which it is installed. The most important
More informationTidy tiles Walls, floors, stairs and tiles on tiles Building materials of brand-name quality for your home Nur im
www.probau.eu Building materials of brand-name quality for your home PROBAU offers a wide range of products in many areas of application for home improvement, renovation and construction. In professional
More informationaquapanel InstallatIon GuIde
Installation Guide AQUAPANEL BEFORE YOU START It s a good idea to stand the AQUAPANEL sheets in the area for 2 days prior to cutting and installing, to allow the sheets to breathe and reach moisture equilibrium.
More informationTECHNICAL DATA SHEET aqua plus pigment hard-wearing glass fabrics for walls and ceilings
TECHNICAL DATA SHEET aqua plus pigment hard-wearing glass fabrics for walls and ceilings Properties / Usage Aqua plus pigment wall coverings are woven from glass yarns. They are available in attractive,
More informationRegupol CONSTRUCTION. Regupol BA. Heavy duty screed isolation. Regupol BA. Excellent impact performance.
CONSTRUCTION Regupol Heavy duty screed isolation Excellent impact performance www.berleburger.de CONSTRUCTION The properties heavy duty screed isolation Offers long term performance, with minimal creep,
More informationFIVE STAR PRODUCTS, INC. (800)
FIVE STAR PRODUCTS, INC. www.fivestarproducts.com (800) 243-2206 Page 1 of 11 DESIGN-A-SPEC GUIDELINES FIVE STAR RS ANCHOR GEL CONTENTS PART A - GENERAL CONDITIONS PART B - MATERIAL SPECIFICATIONS PART
More information