CRESTONE STRAIGHT FIRE PIT SKU:

Size: px

Start display at page:

Download "CRESTONE STRAIGHT FIRE PIT SKU:"

Sabrina Garrett
6 years ago
Views:

CRESTONE STRAIGHT FIRE PIT SKU: 198-6257

1 CRESTONE STRAIGHT FIRE PIT SKU: Approximate Weight: 2200 lbs. Approximate Size: 4 8 Exterior Dimension x 3 Interior Dimension x 1 4 H

CRESTONE BLOCK MATERIALS CONCRETE BLOCKS Color Autumn Blend Straight 179-3614 PRODUCT: DESCRIPTION QUANTITY Sienna Tan 179-3612

Choice Color of Choice Color of Choice Color of Choice 56 40 8 12 Color Autumn Blend Small 179-3734 Medium 179-3724 ADDITIONAL

179-3723 Pea Gravel Landscape Adhesive 36 Steel Square Fire Ring.5 cu. ft.

2 CRESTONE BLOCK MATERIALS CONCRETE BLOCKS Color Autumn Blend Straight PRODUCT: DESCRIPTION QUANTITY Sienna Tan BELGIAN BLOCK MATERIALS Crestone Straight Small Belgian Wall Block Medium Belgian Wall Block Classic Patio Block Color of Choice Color of Choice Color of Choice Color of Choice Color Autumn Blend Small Medium ADDITIONAL MATERIALS Quarry Gray Sienna PRODUCT: DESCRIPTION SKU# QUANTITY Tan CLASSIC PATIO BLOCK Pea Gravel Landscape Adhesive 36 Steel Square Fire Ring.5 cu. ft. 10 oz Tube 36 x Color Gray Red Tan SKU Classic Patio Block Small Belgian Wall Block Medium Belgian Wall Block Crestone Straight 32 PREPARE

3 INSTRUCTIONS: These plans will walk you through each step as you Prepare, Assemble and Enjoy the new addition to your yard. Check out the Progress Bar at the bottom of each page to track your advancements as you complete each phase of your project! RESPONSIBILITIES: It is the responsibility of the owner to ensure compliance with all applicable laws, codes and regulations for any project. Proper safety precautions must be taken prior to and during the construction of each project. Please follow standard safety guidelines and wear necessary protective equipment when building and using your new backyard addition. FOUNDATION: A solid foundation is necessary to prevent settling and tilting of each project. We recommend using a leveling pad, unless local building code requires you to pour a concrete foundation or build another type of foundation. ***Fire ring should be placed on stone, dirt or sand surfaces. Pavers or concrete can be installed around fire ring, but should not be under fire ring. Fire Ring should not be placed on wood or composite decking surfaces. TIPS FOR BUILDING LEVELING PADS: Choose the location for the completed project; place and mark the position of the base layer of blocks. Once marked, remove the blocks and the organic top soil within the marked area. If applicable to your area, create a leveling pad with a non-frost susceptible, well graded, compacted angular gravel-sand mixture with fines (GW as per ASTM D248). The leveling pad should be a minimum of 4 to 6 inches thick. For leveling pads greater than 8 thick, the fill material shall be placed in more than one lift. Each layer or lift of fill material shall be leveled and compacted to a 95% Standard Proctor density before moving on. Once the top layer of fill material is compacted and level, place the base layer of blocks. The base layer should sit 1 to 2 inches below grade to help further prevent shifting. Use additional fill material to level the base layer as needed. * If a concrete slab is required, prepare a leveling pad using the procedures listed in the paragraphs above. The concrete shall have a minimum compressive strength of 2500 psi. A 4-inch thick concrete slab should be more than sufficient. A thickened edge and reinforcement of the leveling slabs may be required. Please consult a professional engineer for specific requirements. PREPARE TOOL CHECK LIST Level Protective Equipment Utility Knife Rubber Mallet Caulk Gun Tape Measure Chisel Standard Hammer BEFORE YOU BEGIN: Please research and follow local building codes prior to the excavation, construction and assembly of your project. Whether you plan to build the project yourself or to hire a professional, every project requires a call to mark your utility lines. Exercise caution when you work with Concrete Block designs. Wear protective safety equipment such as safety glasses, dust masks, gloves and a hard hat. 3

TABLE OF CONTENTS CRESTONE STRAIGHT FIRE PIT DIMENSIONS PREPARE: Materials List Tool Check List Foundation Guidelines 2 3 3 4 8 36 Ring ASSEMBLE: Level 1 - Level 3 Level 4 - Level 6 5 6 1 4 ENJOY:

4 TABLE OF CONTENTS CRESTONE STRAIGHT FIRE PIT DIMENSIONS PREPARE: Materials List Tool Check List Foundation Guidelines Ring ASSEMBLE: Level 1 - Level 3 Level 4 - Level ENJOY: Finished Elevations Use and Care Instructions More Concrete Block Ideas TECHNIQUES Fasten each layer of block together with 1/4-3/8 bead of landscape adhesive on all bottom block faces unless otherwise noted. Refer to the landscape adhesive s application instructions for proper use. * Do not over apply adhesive. It may reduce effectiveness. Use mineral spirits to remove any unwanted adhesive. 4 PREPARE INSTALLATION INSTRUCTIONS Follow suggestions on page 3 to build a proper foundation before starting your new project. If not already set, place the first level of block 1-2 below grade, level and fill in any gaps. Use Level 1 as a reference to place the blocks for all remaining levels. Refer to the illustrations on the following pages to guide you through each step. Prior to adhering each level to the previously laid block, place the entire level of blocks and check to make sure the fire pit insert fits properly. Remove small sections at a time to place the adhesive. Once all levels are complete, position the insert into the finished pit. Fill the base of the pit, up to and slightly above the bottom of the metal insert, with gravel. Wait a minimum of two days before starting a fire.

(16) Crestone Straight (12) Small Belgian Wall Block See Corner Detail Corner Detail Short edges 2-3/4 11-1/2 11-1/2 Trim blocks

5 Level 1 Level 3 (16) Crestone Straight (12) Small Belgian Wall Block Important: You will need to remove the back lips from all Crestone blocks prior to assembly. (16) Crestone Straight (12) Small Belgian Wall Block See Corner Detail Corner Detail Short edges 2-3/4 11-1/2 11-1/2 Trim blocks to form corners. See Corner Detail on Level 1. Level 2 (12) Crestone Straight (8) Small Belgian Wall Block (4) Medium Belgian Wall Block Test fit the 36 Steel Fire Ring at this level. Cut Medium Belgians to 6-1/4 ASSEMBLE 5

Level 4 (12) Crestone Straight (8) Small Belgian Wall

Cut Medium Belgians to 6-1/4 Level 6 (1) Fire Ring Level 5

6 Level 4 (12) Crestone Straight (8) Small Belgian Wall Block (4) Medium Belgian Wall Block Important: You will need to remove the back lips from all Crestone blocks prior to assembly. Cut Medium Belgians to 6-1/4 Level 6 (1) Fire Ring Level 5 (12) Classic Patio Block 6 ASSEMBLE Allow fire pit to fully dry before filling with gravel and starting a fire.

7 FIRE PIT ELEVATIONS Top View Side View ENJOY 7

8 Use and Maintenance With proper use and maintenance you can enjoy this new addition to your landscape for years to come. Fire Pit Use: When using your fire pit, always following burning regulations in your area and never leave a fire unattended. Keep the fire within the metal insert; any exposure of the flames directly to the concrete blocks may cause blackening or cracking of the blocks. Keep gravel or sand up to and above the base of the metal insert to protect the blocks from direct flame exposure. The gravel base provides drainage and helps protect any blocks that are positioned below the bottom of the metal insert. Fire Pit Maintenance: Clean your fire pit often. Wait until the fire has burned out completely and all ashes have cooled before cleaning the fire pit. Begin by removing the larger pieces of debris; the remaining ash can be scooped out and/or lightly sprayed with a hose to rinse through the gravel. 8 ENJOY

PARKLAND BAR. Sienna: Tan: Autumn Blend: Quarry Gray:

PARKLAND BAR. Sienna: Tan: Autumn Blend: Quarry Gray: PARKLAND BAR Tan: 198-6295 Autumn Blend: 198-6296 Sienna: 198-6297 Quarry Gray: 198-6298 Approximate Weight: 4,000 lbs Approximate Size: 6 3-3/4 W x 2-8 D x 3-8 H www.midwestmanufacturing.com BELGIAN WALL