RISK ASSESSMENT SHEET
|
|
- Muriel Horn
- 6 years ago
- Views:
Transcription
1 Task Generic install telecoms equipment Assessment date 3rd October 2017 Location Various Review date 2nd October 2018 Number of staff at work Various Signature 1 Selected locations Works carried out during Obstruction to excess engineering hours / Off peak egress hours as per local survey 2 Plant Noise (using plant) to Operatives to wear ear operatives defenders Plant Noise (using plant) to Barriers distancing others others away from noise source Electrical equipment Electric shock Isolation of equipment by qualified electrician 5 External works Staff Barriers, hoarding erected Collision with others manoeuvring around worksite 6 Cold weather Risk of cold weather Operatives to wear suitable working clothing Site Cleanliness Injury form debris All debris to be cleared as tripping etc work proceeds Lifting heavy plant and materials Manual handling Kg max loads / Sufficient labour / Mechanical assistance (Inspected)/Manual handling assessments Provision of first aid on site 10 Nuisance Use of abrasive wheel saw Use of abrasive wheel saw Use of abrasive wheel saw Condition of existing building Non treatment of injuries Obstruction of warning systems Sparks flying particles Wheel shatter Fire from sparks Dilapidated structures First aid kit to be provided on site. Trained First Aiders Personal stereo's prohibited Operatives to wear suitable goggles Trained operatives only / Use jigs Fire extinguisher on site screens / Observation for 30 minutes after operation finished Inspection of structure before work commences / Inspection of structure by structural engineer if required NOTE: All completed Risk Assessments should be ed to risk.assessment@flintmail.com Page 1 of 8
2 Existing toilet facilities / 15 Welfare of staff Food poisoning / Fatigue / Personal Existing washing facilities / Existing messing area on work Needs site / Create messing facility in vehicle 16 Handling sharp edges and or objects Cuts, infection Operatives to wear gloves 17 Trespassers on site if no Crush, collision and Secure site at the end of each other arrangements in electrocution shift / Provide warning notices place Operatives to wear dust 18 Various building works Inhalation of dust masks / Adequate ventilation / COSHH assessment required / Regular removal of debris Steps/ladders used only for minor works if three points of contact can be maintained. If not use: 19 Working at heights Falling Access towers with full guard rails and toe boards Scaffolding MEWP with safety harness attached to MEWP Safely harness with fall arrest system. Edge protection provided where required 20 Working directly Operatives to wear hard hats/ Striking of head underneath others Exclusion zones Objects falling from Operatives to wear hard hats/ Striking of head above Exclusion zones Epoxy resin adhesives Skin disease PPE worn ( gloves) Electrical equipment - New installation Electrical equipment - New installation Removal of redundant gas supplies Working at night / Poor Visibility Electric shock / Fire / Explosion Electric shock / Fire / Explosion Explosion / Fire / Fumes Tripping, falling or slipping Installations to be carried out by qualified electrician only Installations to be tested and certified before commissioned for use Use of qualified registered gas fitters only Ensure adequate lighting provided / Provide floodlighting as necessary NOTE: All completed Risk Assessments should be ed to risk.assessment@flintmail.com Page 2 of 8
3 27 Personal lack of competence Accidents/ incidents from lack of knowledge / skill Training of staff / Briefing of staff / Competence assessment site agent/ supervisor to check certification when signing in on site. NOTE: All completed Risk Assessments should be ed to risk.assessment@flintmail.com Page 3 of 8
4 28 Precautionary measures Failure to comply with Health & Safety best practices 29 Precautionary measures Access requirements 30 Anthrax Health hazard Asbestos Asbestosis Cadmium Health hazard Confined spaces Health hazard / Risk of Explosion Health & Safety up dates received from TRACAS / Review of amendments carried out Staff & sub contractors briefed monthly Discharge of material to drains and watercourses Contamination Lead - Old paintwork containing Lead Health hazard Weils disease Health hazard Inadequate risk assessment Various Site agent on site / Security arrangements in place / Signing in of all Staff & sub contractors Staff & sub contractors briefed / Records consulted Site inspected before work commences / Records consulted / Contract administrator consulted / Removal by licensed contractor only. Site inspected before work commences / Records consulted / Contract administrator consulted / Removal by licensed contractor only. Site inspected before work commences / Records consulted / Contract administrator consulted / Trained operatives only to work in confined spaces Staff & sub contractors briefed / Site inspected before work commences / Preventive methods to be implemented if required No burning off or chipping back to be done without special arrangements being put into place. Staff & sub contractors briefed / Use of PPE / Washing facilities Only authorised persons to prepare / Site inspected before work commences / Review if method or task alters Only approved PPE issued to 38 Issue, use of PPE Various the required BS or group standard requirement NOTE: All completed Risk Assessments should be ed to risk.assessment@flintmail.com Page 4 of 8
5 39 Working outside in summer Sunstroke / Sunburn / Skin cancer Wearing of shorts is prohibited / Light coloured tee shirts or shirts to be worn / Use of sun screen / Provide shade / Skin to be covered to prevent exposure NOTE: All completed Risk Assessments should be ed to risk.assessment@flintmail.com Page 5 of 8
6 40 Transportation of waste Hazardous substances Transport in suitable containers / Use correct vehicle / Test chemicals if content unknown / Use specialist if required Transport in suitable containers / Use correct 41 Disposal of waste vehicle / Test chemicals if Hazardous substances content unknown / Use / Spillage / Polution specialist if required / Dispose of at a registered waste transfer station only 42 Scaffolding - Incorrect Design and erection by Collapse of scaffold erection qualified company's only Scaffolding - Alterations/Additions Scaffolding - Incomplete scaffolding Scaffolding - Maintenance Maintenance to toilets: public and staff/hypodermic needles/other sharps Working in areas where hypodermic or other sharps maybe concealed 48 Removal of sharps 49 Disposal of sharps Collapse of scaffold / Traps for workers Collapse of scaffold / Traps for workers Collapse of scaffold / Traps for workers Infections / Contagious diseases / Cuts / Puncture wounds / Long term illness Infections / Contagious diseases / Cuts / Puncture wounds Infections / Contagious diseases / Cuts / Puncture wounds Infections / Contagious diseases / Cuts / Puncture wounds / Risk to others including children Qualified scaffold company only to make additions or alterations / All to be recorded in scaffold register Scaffold completion certificate to be issued before works can commence / Warning signs scaffold incomplete Scaffold inspection weekly / Scaffold register to record / Site supervisor to inspect register before work commences each day Operatives instructed to inspect all areas before commencing work Operatives instructed to inspect all areas before commencing work Operatives to use sharps boxes and pickers unless other local instructions exist Sharps in sharps boxes not to be left where others may gain access to the boxes / All sharps to be disposed of at a registered disposal site NOTE: All completed Risk Assessments should be ed to risk.assessment@flintmail.com Page 6 of 8
7 50 Working on Roofs - Weather conditions/heavy Rain, snow, ice/heavy frost Slips, trips falls Weather conditions to be assessed by operatives before getting onto roof / On call manager, H&S advisor to be consulted if in doubt NOTE: All completed Risk Assessments should be ed to risk.assessment@flintmail.com Page 7 of 8
8 51 Handling items contaminated with Pigeon droppings 52 Removal of Packaging 53 Lack of security and breach of security rules 54 Lone working Laser - Optical power exposure Working in public areas - Day light hours Working in public areas - Night hours Working in public areas - Unmanned locations Working in public areas - Unmanned locations 60 Use of Electrical Tools Respiratory diseases / Skin contamination The equipment may be packed in wooden crates splintered wood Injury to personnel No emergency procedures / Delay in responding to accidents Risks while working on ODF systems / Permanent Eye/Skin Damage Assault by members of public Assault by members of public Assault by members of public Thief of plant and equipment if left unattended Electric Shock / Heat/Burns e.g. Glue Gun Staff to wear gloves, goggles and disposable masks Correct PPE is required Mobile Operator premises, are high security areas requiring all external doors to be closed except during loading / Company security passes to be worn at all times Proper use of access cards. Controls for lone working, communications and regular / No lone working on live electrical equipment or areas of high risk. All Equipment should have clear labels indicating optical hazards / Adapters within patch panel closures and free connectors should be permanently capped to prevent accidental skin and eye contact that might result in injury / All cables to be isolated before work commences If working outside offices two men required Staff may not be in attendance / Two men required Two men required Two men required / One to stay with plant & equipment PAT Testing of Power Tools / Hot Permit to Work / "Fire Watch" for 30 minutes after work activities NOTE: All completed Risk Assessments should be ed to risk.assessment@flintmail.com NOTE: All completed Risk Assessments should be ed to risk.assessment@flintmail.com Page 8 of 8
Personal Protective Equipment (PPE) Safety Program
Personal Protective Equipment (PPE) Safety Program ENVIRONMENTAL HEALTH & SAFETY pg. 1 Table of Contents A. Introduction And Purpose... 4 B. Background... 4 C. Policy... 4 D. Personal Protective Equipment
More informationCompany s Name: GHI Warehouse Date of Risk Assessment:
Company s Name: GHI Warehouse Date of Risk Assessment: 10-01-06 What are the hazards? Falls from height Who might be harmed and how? Staff could suffer severe or even fatal injuries if they fell whilst
More informationHANDING-OVER CERTIFICATE - SCAFFOLDING
HANDING-OVER CERTIFICATE - SCAFFOLDING Contractor : Site : Contractor. customername Site. Site name Date : Time : Erected by : Signature : Description of section handed over Job specification. description
More informationMETHOD STATEMENT SCREEDING OF FLOOR
17-18 Gaerwen Industrial Estate Gaerwen Isle of Anglesey LL60-6HR Tel: 01248-422555 Fax: 01248-422556 Mobile: 07891-557581 Project/Contract Preparation of sub floors & screeding principal Contractor Apollo
More informationSAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT Principal Contractor: ROBERT LIVINGSTONE Project Address: 123 SYDNEY ROAD SYDNEY NSW 2000 High Risk Work Hazards and Risks Identified Control Measures Persons working at a height
More informationACT Scaffolding Services LTD METHOD STATEMENT Scaffold erection
Address: 20 Bole Close, Wombwell, Barnsley, South Yorkshire. S73 8AZ Tel: 07883 780704 Email: enquiries@actscaffold.co.uk Web: www.actscaffold.co.uk Project/Contract Boiler Scaffolding Client Example Comp
More informationNetwork Rail Project No: Issue: 002 Date 11/07/2017 Work Package Plan Arena Tunnel LSM773 Prepared by: Start Date: 15/07/17 Finish Date: 23/07/17
Work Package Plan Arena Tunnel LSM773 Prepared by: Jimmy Galbraith (Print Name)..... (Signature) Works Manager (Job Title) Approved by the Contractor s Engineering Manager (CEM):...... (Print Name).....
More informationRisk Assessment Form (Qualitative)
Assessment Form (Qualitative) Project / ocation:..d.a.s WATERS RA & Issue No: 004 Prepared by:.r.sit Date: 10/10/16 Signature: ACTIVITY DESCRIPTION: Person (s) at risk: Tree Felling (Non Climbing) Employees
More informationRISK ASSESSMENT As exhibitions and events are deemed as hazardous environments, it is a legal requirement that all exhibitors and contractors
RISK ASSESSMENT As exhibitions and events are deemed as hazardous environments, it is a legal requirement that all exhibitors and contractors undertake a suitable and sufficient Risk Assessment prior to
More informationCause of Loss and Risk Control Techniques
Cause of Loss and Control Techniques Regular training and proper supervision are two key elements in being proactive on safety and reducing exposure for work related injuries. Caution and safety signs
More informationNEVER REMOVE THE SAFETY GUARDS
Page 1 of 5 Name Recommended Use Designed for cutting stumps up to 200 mm above ground and 120 mm below ground. Maximum Stump diameter 300 mm. NOT suitable for stumps surrounded by rocks, stones, concrete
More informationA2B. Construction (Design and Management) Regulations 2015 PRE CONSTRUCTION INFORMATION PACK (V ) PROJECT:
A2B. Construction (Design and Management) Regulations 2015 PRE CONSTRUCTION INFORMATION PACK (V.2 10.5.17) PROJECT: Oakdale Primary School, Peterborough Extension, Refurbishments and Associated Works.
More informationDate Prepared: Location: Time: Approximate Temperature (degrees F): Weather Conditions: Project Name:
Appendix C Hazard Assessment and Trench Entry and Authorization Form for regularly scheduled and emergency trenching activities Date Prepared: Location: Time: Approximate Temperature (degrees F): Weather
More informationReplacement Fascia & Soffits. Upgrade Electrical Installation Consumer Unit/Single to double sockets. Upgrade Central Heating System MHS Option 1
This Method statement lays out the general arrangements for the Health Safety and Welfare for the personnel working on the above contract. The Scope of works is as follows: Project description Upgrade
More informationRISK ASSESSMENT. HAZARD POTENTIAL 3 x MAJOR 2 SERIOUS 1 SLIGHT. RISK POTENTIAL 3 x HIGH 2 MEDIUM 1 LOW
MANUAL HANDLING 1 Operative Sustaining Back Injury 2 Operative Sustaining Injury to Limbs 1 Where there is a risk of injury from the manual handling of materials, equipment etc., an assessment will be
More informationLevel 2 NVQ Certificate in Erection of Precast Concrete (Construction)
Level 2 NVQ Certificate in Erection of Precast Concrete (Construction) Qualification Specification ProQual 2016 Contents Introduction 3 Qualification profile 3 Qualification Structure 4 Pathway 1 Flooring
More informationImplementing an Effective Personal Protective Equipment (PPE) Programme
Implementing an Effective Personal Protective Equipment (PPE) Programme Introduction Personal protective equipment is preventive equipment which is used by the worker to protect his safety in many organisations
More informationScissor Lift Safety for Clients and Employees or ARS
ADVANCED RESOURCE SOLUTIONS INNOVATIVE SOLUTIONS FOR PROJECT SUCCESS Scissor Lift Safety for Clients and Employees or ARS Added 1/20/2017 Employees: Guidelines addressed in OSHA 1926.451; 1926.452(w);
More informationTransport Sector Portfolio
Transport Sector Portfolio Rehabilitation of 4.476 Kms of Asphalt Road in Shindand District, Herat Province, Afghanistan. United Nations Office for Project Services ( UNOPS ) -and- Name of Contractor Site
More informationLevel 2 NVQ Diploma in Construction Operations and Civil Engineering Services Construction Operations (Construction)
Civil Engineering Services Construction Operations (Construction) Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 4 Qualification structure 5 Centre requirements
More informationJointofeu Series Fire Barriers I Installation Instructions
Product Description Jointofeu is manufactured from a woven mineral wool and installed into expansion joints with a heat resistant adhesive. It is suitable for both vertical and horizontal expansion joints
More informationSafe Work Method Statement
Safe Work Method Statement Disclaimer: Use of Master Builders Generic Safe Work Method Statements The Master Builders Association of Victoria expressly disclaim all and any liability to any person in respect
More informationWelding and Cutting Safety
Welding and Cutting Safety Welding and Cutting Objectives Describe welding safety requirements for: Eye protection Protective clothing Fire Prevention Requirements Ventilation Safety Requirements Electrical
More informationEnvironmental, Health and Safety Policy for Contractors
Environmental, Health and Safety Policy for Contractors The attached policy is a tool to help contractors understand and comply with RBC's Environmental, Health and Safety rules. The information that follows
More informationLevel 2 NVQ Diploma in Construction Operations and Civil Engineering Services Construction Operations (Construction)
Civil Engineering Services Construction Operations (Construction) Qualification Specification ProQual 2014 Contents Page Introduction 3 The Qualifications and Credit Framework (QCF) 3 Qualification profile
More informationCONTINENTAL FERRY PORT SITE INDUCTION
CONTINENTAL FERRY PORT SITE INDUCTION Port activities As landlord of the Commercial Port, the Port Authority must be informed of all works conducted on these premises The Authority is committed to the
More informationPersonal Protective Equipment (PPE)
Personal Protective Equipment (PPE) Owner Name Title Signature Date 03 March 2017 Suleman Ali Director of Safety Strategy & Support Services Authoriser Name Title Signature Peter Vujanic Date 26 June 2017
More informationLevel 2 NVQ Diploma in Construction Operations and Civil Engineering Services Highways Maintenance (Construction)
Civil Engineering Services Highways Maintenance (Construction) Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements
More informationBARRATT DEVELOPMENTS PLC SAFETY, HEALTH & ENVIRONMENTAL CODE FOR SUBCONTRACTORS
Page 1 of 16 BARRATT DEVELOPMENTS PLC SAFETY, HEALTH & ENVIRONMENTAL CODE FOR SUBCONTRACTORS SECTION 1 - MANAGEMENT FOR SAFETY Introduction Acknowledgement of Safety, Health & Environmental code (a) Safety
More informationHEALTH AND SAFETY POLICY
HEALTH AND SAFETY POLICY Prepared for: Limited Unit A9 Bell Lane Office Village Little Chalfont Bucks HP6 6GL Date of Issue: 3 Feb 2014 Current Issue 9 June 2017 Issue 5 Tel: 01494 765671 Fax: 01494 549852
More informationBasic Environment,Health & Safety Guidelines for Foundries
Basic Environment,Health & Safety Guidelines for Foundries Design collection system and location of coal storage facilities to prevent impacts to soil and water resources. Coal stockpile areas should be
More informationEVENT SAFETY & PLANNING CHECKLIST For UNIVERSITY EVENTS
EVENT SAFETY & PLANNING CHECKLIST For UNIVERSITY EVENTS PLANNING AND PREPARATION The success of an event is measured in many ways but events must also be measured in terms of safety. Event organizers have
More informationLevel 2 NVQ Diploma in Associated Industrial Services Occupations Passive Fire Protection (Construction)
Level 2 NVQ Diploma in Associated Industrial Services Occupations Passive Fire Protection (Construction) Qualification Specification ProQual 2016 Contents Page Introduction 3 Qualification profile 3 Qualification
More informationLevel 2 NVQ Diploma in Roadbuilding and Maintenance (Construction) Pathway 29: Plant Road Sweeping. Qualification Specification
Level 2 NVQ Diploma in Roadbuilding and Maintenance (Construction) Pathway 29: Plant Road Sweeping Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Entry requirements
More informationWHS RISK REGISTER FOR THE DESIGN OF BUILDINGS AND STRUCTURES
WHS RISK REGISTER FOR THE DESIGN OF BUILDINGS AND STRUCTURES Project Name: Project Manager: Date Building of Hand Over: Design Consultants: Qualifications, skills, experience: Hazard Identified Risk Level
More informationWritten Safety and Health Program
Written Safety and Health Program For XYZ Company Required for all Hawaii Businesses with 25 or More Employees Incorporates Provisions of Hawaii Administrative Rules Title 12, Subtitle 8, Part 2, Chapter
More informationHealth & Safety Arrangements for Companies Who Employ Less than 5 Employees
Health & Safety Arrangements for Companies Who Employ Less than 5 Employees Guidance Note 41 Jul 16 1 han 5 Employees Introduction If you are a company with under 5 employees and do not have a suitable
More informationPOLICY ON PERSONAL PROTECTIVE EQUIPMENT
Effective date: August 27, 2016 Supersedes/Amends: November 29, 2005 Originating office: Vice-President, Services Policy Number: VPS-41 SCOPE This policy applies to all Members of the University Community
More informationTurbocharger / TPL-C Original assembly instructions English
Assembly Instructions Turbocharger / TPL-C Original assembly instructions English This document is valid for the TPL-C series: TPL79-C Purpose The assembly instructions explain how the ABB turbocharger
More information+/0'-/12!"&21'1/345$1.1/3!6#''-7-! 8#9!:!;<;=!
"#$%&'(&)&$*+,,-,,%-./ +/0'-/12"&21'1/345$1.1/36#''-7-8#9:;&?-/3@1$-2/#$&'#.7A1/0/0-B$#C-2/D&.&7-$&.*>EF-$G1,#$?#$/0-,1/-*1*/0-$1,H&,,-,,%-./?#$/0-.-A+/0'-/12"&21'1/3/0&/ 1,9-1.79E1'/#./0-7$#E.*,#?5$1.1/36#''-7->20##''#2&/-*&/
More informationSAFETY DATA SHEET SILICA GEL
SAFETY DATA SHEET SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product number RS 388-8415/8421/8437 1.2. Relevant identified uses
More informationComply smarter and faster with the No.1 COSHH Management System
CLP 2015 COMPLIANT Comply smarter and faster with the No.1 COSHH Management System Suitable Sufficient Every time 1 million assessments 150,000 products 750+ customers globally 15,000 new assessments authored
More informationLEVEL 3 HEALTH & SAFETY IN THE WORKPLACE
LEVEL 3 HEALTH & SAFETY IN THE WORKPLACE COURSE CONTENT OVERVIEW 0333 006 7000 www.highspeedtraining.co.uk This Level 3 Health and Safety in the Workplace course is designed to help employers, managers
More informationSHE 002 Method Statements and Risk Assessments
SHE 002 Method Statements and Risk Assessments Arqiva Site Access Requirements This information sheet is designed to detail the mandatory requirements that anyone accessing and working on an Arqiva site
More informationFlooring and Bedding. RonaFloor SL. Self-smoothing seamless epoxy resin flooring system
FEATURES self smoothing epoxy floor screed seamless high strength decorative good chemical resistance easy to clean can be applied to green concrete with use of RonaFloor Epoxy DPM Description RonaFloor
More informationBP OIL -- TOLEDO REFINERY
BP OIL -- TOLEDO REFINERY Document Type: Procedure Refinery Wide Procedure No.: SAF 076 Effective Date: 3/31/17 Scaffold Procedure Revision No.: 8 Owner: E. Stewart / N. Weber Authorized By: Chris Conley
More informationMODULE 14: Off-site Transport and Storage of Healthcare Waste
MODULE 14: Off-site Transport and Storage of Healthcare Waste Module Overview Define external transport of healthcare waste Describe requirements for off-site transport of healthcare wastes including training
More informationPrepared By: Progressive Safety Services LLC
Prepared By: Progressive Safety Services LLC Definition Goals/Benefits Involvement Job Safety Analysis (JSA) Review The assessment of risks present in a particular environment Classification of exposure
More informationSAFETY DATA SHEET Barclay Kerb Granules
Revision Date: 15.06.2011 SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product Name REACH Registration Notes IN CONFORMITY
More informationConforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Identification of the substance/preparation Product name or Trade name Sikaflex -521 UV Safety Data Sheet Conforms to Regulation
More informationThe Horse Rangers Association Health & Safety Policy
The Horse Rangers Association Health & Safety Policy General Statement of Intent The company believes that excellence in the management of health and safety is an essential element within its overall business
More informationKingframe Steel Framing System ("SFS") Infill & Oversail - CDM Design Risk Assessment
, Likely () Major Injury () 0 (High) Unacceptable.0 Persons Prob' Exposed Rating Control Measures Required by Designer to Reduce Action Rating 1 Introduction
More informationHSE MANAGEMENT PLAN. Parami Energy HSE Management Plan Page 1 of 16
HSE MANAGEMENT PLAN Parami Energy HSE Management Plan Page 1 of 16 Table of Contents 1. Purpose 2. Scope 3. Definition of Terms 4. HSE Policy Statement 5. Commitments and Motivation 6. HSE Rules 7. HSE
More informationSawmill Safety & Health. Presented By: John Boysen Safety Consultant OHSA Consultation Program
Sawmill Safety & Health Presented By: John Boysen Safety Consultant OHSA Consultation Program Objectives To gain awareness of the OSHA requirements. To understand how to apply those requirements. To understand
More informationChapter 18 Welding Table of Contents
Chapter 18 Welding Table of Contents 18.1 Foreword 18.2 Introduction 18.3 Applicability of Standard 18.4 Other Policies that Might Apply 18.5 Approved Areas for Welding and Cutting 18.6 Other Areas 18.7
More informationOverview SEMPW306. Deal with incidents and contingencies within the railway environment
Overview This standard is about dealing with the immediate actions that need to be taken in the event of any incident or contingency and understanding their effect or implication on the safety of the line,
More informationSafety & Environmental Orientation Program for Northeast Utilities Transmission Contractors. Northeast Utilities Safety 12/10
Safety & Environmental Orientation Program for Northeast Utilities Transmission Contractors Northeast Utilities Safety 12/10 How Electric Utilities Work Plan the Work & Work the Plan! Agenda Introduction
More informationBASF Contractor Pre-Access Checklist
BASF Contractor Pre-Access Checklist Purpose The purpose of this document is to ensure that BASF communicates all EHS requirements and expectations to each contractor company and that each contractor company
More informationPROCEDURE FOR IDENTIFICATION OF ENVIRONMENTAL ASPECTS, HAZARDS, EVALUATION OF IMPACTS, RISKS AND DETERMINATION OF CONTROL MEASURES
Consolidated Construction Consortium Ltd. PROCEDURE NO. : CSP- 4.3.1 ENVIRONMENTAL ASPECTS, HAZARDS, DETERMINATION OF CONTROL MEASURES REV.NO. 0 DATE: 02-09-2011 PAGE 1 OF 10 ENVIRONMENTAL ASPECTS, HAZARDS,
More informationToday, we re going to talk about the Occupational Safety and Health Administration s, or OSHA s, Hazard Communication Standard, or worker right to
Today, we re going to talk about the Occupational Safety and Health Administration s, or OSHA s, Hazard Communication Standard, or worker right to know, and new requirements for the Globally Harmonized
More informationSAFETY DATA SHEET WHITEBOARD CLEANING SPRAY 250ml
SAFETY DATA SHEET SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product number 3435641 Internal identification AWBS250OD 1.2. Relevant
More informationTABLE OF CONTENT: ACOP NO. ALBA SAFETY, HEALTH & ENVIRONMENT MANAGEMENT SYSTEM. ALBA Code of Practice (ACOP) Subject PAGE
Contractors Safety Health and Environment Management 1 OF 13 TABLE OF CONTENT: 1.0 Introduction... 3 2.0 Purpose... 3 3.0 Responsibilities... 3 4.0 General Requirements... 3 5.0 Training... 4 6.0 Other
More informationHFM Asset Management Contractor Induction Queens Riverside Apartments
HFM Asset Management Contractor Induction Queens Riverside Apartments Contents Purpose About HFM Asset Management HFM Asset Management s Responsibilities Contractors Responsibilities Commencing Work Working
More informationSAFETY DATA SHEET SUPERCAST PVC WATERSTOPS
SAFETY DATA SHEET SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product number Synonyms; trade names 238xxxxUK9 HYDROFOIL,ANGLEGUARD,REARGUARD
More informationSAFETY DATA SHEET PEELABLE COATING MASK
SAFETY DATA SHEET SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product number PCM, EPCM250ML, ZE 1.2. Relevant identified uses
More informationHORSE SHELTERS 6, 12, 15, 18, & 24 SHELTERS ASSEMBLY MANUAL
HORSE SHELTERS 6, 12, 15, 18, & 24 SHELTERS ASSEMBLY MANUAL Read this manual before using product. Failure to follow instructions and safety precautions can result in serious injury, death, or property
More informationLevel 2 NVQ Diploma in Wood Occupations (Construction)
Qualification Specification ProQual 2015 Contents Page Introduction 3 The Qualifications and Credit Framework (QCF) 3 Qualification profile 4 Rules of combination 5 Centre requirements 8 Support for candidates
More informationSITE SAFETY RULES - SILVERSTONE CLASSIC 2018
SITE SAFETY RULES - SILVERSTONE CLASSIC 2018 The following is an outline of the Safe Working Requirements for all Companies, staff and any other persons for this event. Please note that the terms Company
More informationConstruction, Planning and the Built Environment Unit Content and Assessment Guidance (Attachments pathway)
Construction, Planning and the Built Environment Unit Content and Assessment Guidance (Attachments pathway) NCFE Level 2 NVQ Certificate in Plant Operations (Construction) (Attachments pathway) (601/7277/0)
More informationTrip and slip Hazard policy
Trip and slip Hazard policy Issue No.: 01 Issue Date: February 2012 Version: 05 Reason for version change: Review July 2015 by AR Authorised by: WM Date: 22 nd July 2016 Document Number: STAN0022012 Originator:
More informationOHS - Making Contracts Work. Contractor Safety Checklists
OHS - Making Contracts Work Contractor Safety Checklists OHS - Making Contracts Work Contractor Safety Checklists Authors: Greg Dodd and Kathy Haseloff Safety Valve Consulting Publisher: Mining and Quarrying
More informationSAFETY DATA SHEET THERMALCOTE
Revision Date APRIL 2013 Revision 6 SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product name Product No. TAL, ETAL20K, ZE
More informationSAFETY DATA SHEET ILFOSTOP 1+19
Revision Date 19/10/2015 Revision 3 Supersedes date 17/09/2012 SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product name Internal
More informationSAFETY DATA SHEET. Blanket D-24B
Blanket D-24B Page 1 of 7 SAFETY DATA SHEET Blanket D-24B SDS according to Regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), Annex
More informationSilica Silica, Crystalline (Respirable Size), National Institute of Health
Great Western Painting Silica Silica, Crystalline (Respirable Size), National Institute of Health Silica Occupational silica exposure is completely preventable through employee training, use of a silica
More informationMaterial Safety Data Sheet. Accepta Statham House Talbot Road Manchester M32 0FP
Material Safety Data Sheet 1. Company Identification and Product Information Product Name: Application Foam control agent for use in effluent, cooling towers and process control. Supplier: Accepta Ltd
More informationSAFETY DATA SHEET CITRIC ACID
Revision Date 18.02.2013 Revision 03 1 / SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product name Product No. 100802, 1006,
More information"WALKING AND WORKING SURFACES IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "WALKING AND WORKING SURFACES IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR
More informationProduct Data Sheet RESOPAL EXCELLENT
Product Data Sheet RESOPAL EXCELLENT This information describes the composition of RESOPAL Excellent and gives advice for their handling, processing, use, and disposal. Such Elements are used as kitchen
More informationLevel 2 NVQ Certificate in Wall and Floor Tiling (Construction) Qualification Specification
Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements 5 Support for candidates 5 Assessment 6 Internal quality assurance
More informationANGLE GRINDER USE PROCEDURE
Date Adopted: 7 March 2013 Reviewed: 7 March 2013 Due for Review: 7 March 2015 Business Unit: HSE Current Policy Date: 7 March 2013 ANGLE GRINDER USE PROCEDURE 1.0 PURPOSE 2.0 SCOPE 3.0 REFERENCES TasPorts
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Name: Company Identification: RELENE HDPE Reliance Industries Limited, Polymer Business,
More informationMIE - H&S WHMIS
MIE - H&S - 07 - WHMIS Please watch this video first. WHMIS WHMIS: What Does It Mean? The Workplace Hazardous Materials Information System WHMIS is part of your right to know about the hazards of the chemicals
More informationSAFETY DATA SHEET STATICIDE ULTRA II FLOOR FINISH
Revision Date APRIL 2013 Revision 6 SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product name Product No. 48001UF, E48001UF,
More informationAUDIT OF LEAD DRILLERS & DRILLING SUPPORT OPERATIVES
AUDIT OF LEAD DRILLERS & DRILLING SUPPORT OPERATIVES Welcome to the British Drilling Associations Audit scheme. The Audit has undergone a major review and upgrade in 2015 and now conforms to the latest
More information24 Portable Saw Mill OWNER S MANUAL
24 Portable Saw Mill OWNER S MANUAL WARNING: Carefully read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationCONSTRUCTION SAFETY GUIDE
California Institute of Technology CONSTRUCTION SAFETY GUIDE Caltech Environment, Health, and Safety Office 1200 E. California Blvd., M/C 25-6 Pasadena, CA 91125 Phone: 626.395.6727 Fax: 626.577.6028 Email:
More informationPROGRAM OVERVIEW JOB HAZARD ANALYSIS (JHA) SAFETY PROGRAM REGULATORY STANDARD: 29 CFR
PROGRAM OVERVIEW JOB HAZARD ANALYSIS (JHA) SAFETY PROGRAM REGULATORY STANDARD: 29 CFR 1910.132-138. INTRODUCTION: Injuries in the workplace often occur because employees are not adequately trained in the
More informationKevin Kilmartin. Univar. Chemistry Delivered. Treatment Plant Chemical Safety. Presenter s Name (Change on Title Master)
Kevin Kilmartin Univar Chemistry Delivered Treatment Plant Chemical Safety Presenter s Name (Change on Title Master) One of our original delivery trucks 2 Early Salesman vehicle 3 Univar s History World
More informationUsing petrol-driven chainsaws
AFAG301 Using petrol-driven chainsaws Introduction This leaflet covers the safe working practices to be followed when using a petroldriven chainsaw. For guidance on specific operations involving chainsaws,
More informationAsbestos Awareness Program
Safety Manual 1 of 9 Safety Manual Sect: 1.0 Purpose 2.0 Scope Rel. Date: Last Review: This program covers Ardent policy related to asbestos, either discovered or suspected in the workplace. Ardent recognizes
More informationSTANDARD PRACTICE INSTRUCTION
STANDARD PRACTICE INSTRUCTION DATE: March 1, 2001 SUBJECT: Scaffolding Safety Program. REGULATORY STANDARDS: 29 CFR 1910.28 Safety Requirements For Scaffolding. 29 CFR 1910.29 Manually Propelled Mobile
More informationBUSINESS OCR LEVEL 3 CAMBRIDGE TECHNICAL. Cambridge TECHNICALS UNDERSTANDING HEALTH AND SAFETY IN THE BUSINESS WORKPLACE CERTIFICATE/DIPLOMA IN
Cambridge TECHNICALS OCR LEVEL 3 CAMBRIDGE TECHNICAL CERTIFICATE/DIPLOMA IN BUSINESS UNDERSTANDING HEALTH AND SAFETY IN THE BUSINESS WORKPLACE H/502/5458 LEVEL 3 UNIT 17 GUIDED LEARNING HOURS: 60 UNIT
More informationScaffold Standard (Standard to Managing and Appointing Scaffolding Contractors on University College London (UCL) Projects) Management Standard
UCL Estates Scaffold Standard (Standard to Managing and Appointing Scaffolding Contractors on University College London (UCL) Projects) Management Standard 27 th May 2015 Page 1 of 27 UCL Estates Document
More informationMagnesium Sulphate Heptahydrate
Safety Data Sheet Magnesium Sulphate Heptahydrate 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product name Magnesium Sulphate Heptahydrate Brand name
More informationWalking and Working Surfaces in Construction Environments. Leader s Guide and Quiz
4786 Walking and Working Surfaces in Construction Environments Leader s Guide and Quiz INTRODUCTION TO THE PROGRAM Structure and Organization Information in this program is presented in a definite order
More informationCOSVR11 - SQA Unit Code DY13 04 Erect structural carcassing components
Overview This standard is about 1 interpreting information 2 adopting safe and healthy working practices 3 selecting materials, components and equipment 4 preparing and carrying out the erection of carcassing
More informationUse of Locally Fabricated or Modified Equipment. DROPS Forum July
Use of Locally Fabricated or Modified Equipment DROPS Forum July 02 2009 Incident 1: Welder Electrocution A rig subcontractor suffered fatal injuries from electrical shock while performing a welding operation.
More informationStandards of Performance. Mariane Ewbank Chairperson Standards and Customs WG
Standards of Performance Mariane Ewbank Chairperson Standards and Customs WG Please hold for instructions to open packs 1 and 2 Can we consider this an official doc???? Second version And this invoice?
More informationPesticide Safety Program
Pesticide Safety Program Environmental Health, Safety and Risk Management Department PO Box 6113, SFA Station Nacogdoches, Texas 75962 Thanks to Texas State University for the use of their pesticide chemical
More information