Pro-Prime Slurry Primer

Size: px
Start display at page:

Download "Pro-Prime Slurry Primer"

Transcription

1 CI/SfB 1231 Yq4 L64:D1231 Uniclass F3 EPIC Pro-Prime Slurry Primer Applications Ultrascape Pro-Prime is a polymer modified cementitious slurry primer specifically formulated to provide exceptional bond between all types of stone surfaces and Ultrascape Pro-Bed HS Fine Bedding Concrete. The use of Ultrascape Pro-Prime in conjunction with Ultrascape Pro-Bed HS ensures full and even contact will be made with aggregate particles as well as promoting adhesion to greater than 2N/mm 2 as per the requirements of BS7533, parts 7 & 12. The product is suitable for application in town centre pedestrian schemes, pathways and carriageways. Ultrascape Pro-Prime can be used with all types of natural stone, concrete flags and clay paviours. Technical Ultrascape Pro-Prime is supplied pre-blended in 20kg bags. With the simple addition of water on site, the product creates a liquid slurry paste, which can be applied to the underside of all paving elements at a thickness of 1mm to 2mm immediately prior to their placement on Ultrascape Pro-Bed HS. Preparation Correct surface preparation is critical in order to guarantee successful application and durable product performance. Remove all debris and ponded water from the supporting structure/roadbase. The roadbase as well as the paving elements should be cleaned by brushing or washing with water to remove dust, loose material, packaging and/or production aids prior to the application of Ultrascape Pro-Prime. Mixing Place 7 litres of clean water in a suitable container. Add Ultrascape Pro-Prime powder slowly and mix for 3 to 5 minutes to create smooth lump-free slurry. The primer should be used on the supporting layer/ roadbase immediately prior to the application of the laying course (Ultrascape Pro-Bed HS). Always prime the underside of paving elements at a thickness of 1mm-2mm immediately before their placement upon Ultrascape Pro-Bed HS. Features & Benefits Provides an exceptional bond between bedding concretes and all types of paving elements User friendly requires only the addition of water on site BS7533 compliant Quick and easy application Part of the Ultrascape Streetscape System, which guarantees compatibility and reduces split liability. Application All surfaces should be pre-soaked with clean water immediately prior to the application of Ultrascape Pro-Prime Slurry Primer. The supporting layer/roadbase should be coated with the primer to a thickness of 1mm- 2mm immediately before the application of Ultrascape Pro-Bed HS. The slurry should be fresh and wet when the fine bedding concrete is laid. The underside of all paving elements should be primed to a thickness of 1mm-2mm immediately prior to their placement upon Ultrascape Pro-Bed HS. The slurry should be fresh and wet when the units are placed on the bedding concrete. Health & Safety Operatives should wear proactive clothing and work in well-ventilated conditions. This product contains Portland cement which, when mixed with water is alkaline and may in some cases cause skin irritation. If product enters the eyes, wash thoroughly with water and seek medical advice. In common with all powder products the material should be mixed carefully in order to avoid the raising of dust. For a full updated Material Safety Data Sheet please visit Related Products Ultrascape Pro-Bed HS Fine Bedding Concrete Ultrascape Flowpoint Flowable Rapid Set Grout Ultrascape Cempoint Gun Injected Pointing Mortar Ultrascape Joint Fix Sand Sealant and Surface Protector Ultracrete EP-R9 Epoxy Resin Bedding & Concrete Repair Mortar

2 continued Pro-Prime Slurry Primer Physical Properties Bond (Adhesion) Strength 2.20N/mm² after 28 days Workability 1 hour at 20 C Water Required 7 litres per 20kg Coverage 15m² per 20kg Product Details Unit/Packaging Storage Shelf Life Yield Colour 20kg paper bags delivered on shrinkwrapped pallets Store in closed original container at temperatures between 5 C and 30 C. Avoid frost. This product must be stored in unopened bags, clear of the ground in cool dry conditions and protected from excessive drafts. If stored correctly and used within 6 months of the date shown on the bag, the activity of the reducing agent will be maintained and this product will contain, when mixed with water, no more than % (2 ppm) soluble Chromium (VI) of the total dry weight of the cement Shelf life from date of manufacture in correct for sealed bags is 6 months. Please note: the use of this product after the end of the declared storage period may increase the risk of an allergic reaction 16.9 litres (approximately) per 20kg bag Grey Contact Us Instarmac Group plc, Birch Coppice Business Park, Danny Morson Way, Dordon, Tamworth, Staffordshire, B78 1SE, United Kingdom Tel: +44 (0) Fax: +44 (0) @instarmac.co.uk Order: orders@instarmac.co.uk Website: Ultracrete products are guaranteed against defective materials and manufacture, and will be replaced or money refunded if the goods do not comply with our promotional literature. We cannot however accept any liability arising from the application or use of our products because we have no direct or continuous control over where and how our products are used. All products are sold subject to our conditions of sale, copies of which may be obtained on request. An Brand

3 CI/SfB 1231 Yq4 L64:D1231 Uniclass F3 EPIC Pro-Bed HS Fine Bedding Concrete Applications Ultrascape Pro-Bed HS Fine Bedding Concrete is specifically formulated to meet and exceed the strict demands of BS7533 parts 7 & 12, pavements constructed with clay, natural stone or concrete pavers. The product provides a perfect bound base for natural stone paving and cobbles, concrete paving, flags and block paving, which once laid with Ultrascape Pro-Bed HS, are able to accept foot traffic after just 12 hours and vehicular traffic after 24 hours. The material is also not subject to environmental erosion, which can lead to increased point loads on slabs and consequent breakage. Technical Ultrascape Pro-Bed HS is formulated from selected cements and graded fillers. The pre-blended fine bedding concrete is supplied in 25kg bags or alternatively, for those large projects, in 30 tonne bulk silos. The product can be laid from 10mm to 75mm in one pass with greater depths achievable using successive layers. The material mixes easily on site with the addition of water and provides a compressive strength of 38N/mm² after 28 days complying fully with BS7533 parts 7 & 12. This material should not be used in temperatures below 5 C. Preparation It is of vital importance that the supporting layer that is to receive Ultrascape Pro-Bed HS is stable and not liable to settlement t or heave. Supporting po structures must be cleaned, pre-soaked and all ponded water must be removed prior to application. To promote bond, the supporting layer can be primed using Ultr rascape Pro-Prime Slurry Primer. Please note that this product is suitable only for bound/rigid construction, not for unbound/flexible applications. Features & Benefits Can be laid from 10-75mm in one pass Shrinkage compensated BS7533 compliant Small contractor friendly units Bulk Silo s for largerr projects Pre-blended just add water Open to pedestrian traffic in 12 hours Open to vehicular traffic in 24 hours Long-term durability. Mixing Add between 2.4 and 2.8 litres of clean water to a suitable mixing vessel. Slowly add the contents of one 25kg bag. Mix mechanically for a minimum of 3 minutes and a maximum of 5 minutes. Do not add extra water or part mix bags. Priming To increase overall product performance, prime the supporting layer with Ultrascape Pro-Prime Slurry Primer before applying Ultrascape Pro-Bed HS. Priming the roadbase is not a requirement of the British Standard for pavements constructed te on a bound base. It is of vital importance that the underside of all paving elements are primed in accordance with BS7533, part 4, annex For full details consult the manufacturer or refer to the Ultracrete Pro-Prime Slurry Primer data sheet. Note: The bonding characteristics of Ultrascape Pro-Bed HS will only be achieved when the product is used in conjunction with Ultrascape Pro-Prime slurry primer. Provision of Joints Consideration must be given to movement joints within a bound or rigid construction. Always consult the Project Engineer/Architect for details regarding movement joints. Placing Ultrascape Pro-Bed HS can be laid from 10mm to 75mm in one pass. Greater depths can be achieved using successive layers. Place on a presoaked roadbase and spread to the required thickness. Always prime the underside of paving elements using Ultrascape Pro-Prime Slurry Primer prior to placing the Ultrascape Pro-Bed HS. The bedding concrete and the slurry primer must be fresh and wet. Do not attempt to re-mix or add additional water. Areas should not receive pedestrian traffic for 12 hours after application and vehicular traffic for 24 hours. Related Products Ultrascape Pro-Prime Slurry Primer Ultrascape Flowpoint Flowable Rapid Set Grout Ultrascape Cempoint Gun Injected Pointing Mortar Ultrascape Joint Fix Joint Waterproofing and Surface Sealing Liquid Resin Ultracrete EP-R9 Epoxy Resin Bedding & Concrete Repair Mortar

4 continued Pro-Bed HS Fine Bedding Concrete Health & Safety Operatives should wear protective clothing and work in well-ventilated conditions. This product contains Portland cement which, when mixed with water is alkaline and may in some cases cause skin irritation. If product enters the eyes, wash thoroughly with water and seek medical advice. In common with all powder products, the material should be mixed carefully, avoiding the raising of dust. For a full updated Material Safety Data Sheet please visit Physical Properties (UKAS Accredited) Test Age Compressive Adhesion* Adhesion* Shrinkage Strength* (without primer) (with primer) % 1 day 20 N/mm² 0.72 N/mm² 1.73 N/mm² 0.01 % 7 days 36 N/mm² 0.98 N/mm² 2.02 N/mm² 0.04 % 28 days 38 N/mm² 1.25 N/mm² 2.18 N/mm² 0.11 % Modulus of elasticity 28 days <21500 N/mm 2 Workability 50 20ºC Depending on temperatures test carried out at 20 C. Cool temperatures retard, warm temperatures accelerate product performance. Product Details Unit/Packaging Storage Coverage Density 2180 kg/m 3 Yield Shelf Life Colour 25kg paper bags delivered on shrink-wrapped pallets Store in closed original container at temperatures between 5 C and 30 C. Avoid frost. This product must be stored in unopened bags, clear of the ground in cool dry conditions and protected from excessive drafts. If stored correctly and used within 6 months of the date shown on the bag, the activity of the reducing agent will be maintained and this product will contain, when mixed with water, no more than % (2 ppm) soluble Chromium (VI) of the total dry weight of the cement 1x25kg Bag = 1m 12.9mm Please visit for a free online product calculator litres (approximately) per 25kg bag Shelf life from date of manufacture in correct for sealed bags is 6 months. Please note: the use of this product after the end of the declared storage period may increase the risk of an allergic reaction Grey Contact Us Instarmac Group plc, Birch Coppice Business Park, Danny Morson Way, Dordon, Tamworth, Staffordshire, B78 1SE, United Kingdom Tel: +44 (0) Fax: +44 (0) @instarmac.co.uk Order: orders@instarmac.co.uk Website: Ultracrete products are guaranteed against defective materials and manufacture, and will be replaced or money refunded if the goods do not comply with our promotional literature. We cannot however accept any liability arising from the application or use of our products because we have no direct or continuous control over where and how our products are used. All products are sold subject to our conditions of sale, copies of which may be obtained on request. An Brand Vers Information correct at time of print

5 Flowpoint Rapid Set Grout Applications Ultrascape Flowpoint is a rapid set grout with high fluid consistency for early trafficking that conforms to the strict demands of BS 7533 parts 7 & 12. Ultrascape Flowpoint is ideal for all pavements where a rigid or bound void-free joint is required. The product is suitable for application in town centre pedestrian schemes, pathways and carriageways, and can be used with natural stone, concrete flags and clay paviours. Technical Ultrascape Flowpoint is a fully pre-mixed dry-pack which only requires the addition of water on site. Ultrascape Flowpoint can fill joints from 5mm- 50mm and joint depths of up to 200mm in one pour. This highly fluid grout achieves a final compressive strength of 49.6N/mm² (results achieved using 4.25 Litres of water per 25kg bag), and will reach initial set in 30 minutes, will accept ight foot traffic after 1 hour, and vehicular traffic after 4 hours (dependent upon temperature). Mixing and Application Once the paving is ready to receive the grout the following method must be adhered to: Immediately prior to jointing it must be ensured that the joints are free from debris and all ponded water removed. The paving surface and joints must be pre-soaked and kept wet until the jointing process has been completed. A 25kg bag requires 4.25 litres of water and must be mixed for between 3 and 5 minutes until a smooth lump-free consistency has been achieved. Apply the mortar without delay. Do not store liquid mortar other than in transit from mixer. It must be carefully forced into the joints using a suitable rubber squeegee. The mortar should be constantly moved over the surface to repeatedly top up joints in which the mortar may have slumped following initial placement. Use the rubber squeegee to remove as much mortar as possible from the surface. The surface must be kept constantly moist using a soft spray of water. Features & Benefits Open to foot traffic in 1 hour Open to vehicular traffic in 4 hours Rapid setting Exceptional bond strength Shrinkage compensated Mixes quickly on site with water Initial set after 15 minutes at 20ºC Economical to use Conforms to BS7533 Ideal for large-scale projects Part of the Ultrascape Streetscape System, which guarantees compatibility and reduces split liability When the jointing mortar has hardened sufficiently or achieved its initial set the paving surface must be cleaned using a brush and copious amounts of water. Cleaning must be carried out thoroughly and no mortar must be allowed to remain on the surface of the paving. Precautions Wash all tools frequently. Mix only enough material to apply in 4 minutes. Never remix or add extra water. Wear protective clothing. Avoid skin and eye contact - wet cement can burn the skin. Cool temperatures retard, warm temperatures accelerate. Health & Safety Operatives should wear protective clothing and work in well ventilated conditions. This product contains Portland cement which, when mixed with water is alkaline and may in some cases cause skin irritation. If product enters the eyes, wash thoroughly with water and seek medical advice. In common with all powder products, the material should be mixed carefully to avoid the raising of dust. For a full updated Material Safety Data Sheet please visit Related Products Ultrascape Flowpoint ECO Rapid Set Grout with Recycled Glass Ultrascape Pro-Prime Slurry Primer Ultrascape Pro-Bed HS Fine Bedding Concrete Ultrascape Cempoint Gun Injected Pointing Mortar Ultrascape Joint Fix Joint Waterproofing and Surface Sealing Liquid Resin Ultracrete EP-R9 Epoxy Resin Bedding & Concrete Repair Mortar

6 continued Flowpoint Rapid Set Grout Physical Properties Test Age Compressive Flexural Tensile Bond Strength* Strength* Strength* Strength 2 hours 10 N/mm² hours 12 N/mm² hours 14 N/mm² 4 N/mm² 1.69 N/mm² - 3 days 15 N/mm² days 25 N/mm² 4.5 N/mm² 2.65 N/mm² - 28 days 49.6 N/mm² 7.1 N/mm² 3.91 N/mm² >1.5 N/mm² Shrinkage 0.06 Workability 5-15 minutes * Modulus of elasticity N/mm² Setting time 30 minutes * *Depending on temperatures test carried out at 20 C. Cool temperatures retard, warm temperatures accelerate product performance. Product Details Unit/Packaging Storage 25kg paper bags delivered on shrink-wrapped pallets Store in closed original container at temperatures between 5 C and 30 C. Avoid frost. This product must be stored in unopened bags, clear of the ground in cool dry conditions and protected from excessive drafts. If stored correctly and used within 6 months of the date shown on the bag, the activity of the reducing agent will be maintained and this product will contain, when mixed with water, no more than % (2 ppm) soluble Chromium (VI) of the total dry weight of the cement Coverage 72 bags = m 3 Please visit for a free online product calculator Yield 13.9 litres (approximately) per 25kg bag Shelf Life Shelf life from date of manufacture in correct for sealed bags is 6 months. Please note: the use of this product after the end of the declared storage period may increase the risk of an allergic reaction Colour Natural Grey & Charcoal Contact Us Instarmac Group plc, Birch Coppice Business Park, Danny Morson Way, Dordon, Tamworth, Staffordshire, B78 1SE, United Kingdom Tel: +44 (0) Fax: +44 (0) @instarmac.co.uk Order: orders@instarmac.co.uk Website: Ultrascape products are guaranteed against defective materials and manufacture, and will be replaced or money refunded if the goods do not comply with our promotional literature. We cannot however accept any liability arising from the application or use of our products because we have no direct or continuous control over where and how our products are used. All products are sold subject to our conditions of sale, copies of which may be obtained on request. An Brand Vers Information correct at time of print.

Jointing Mortar. How To Instructions. Jointing Mortar: Equipment you may need include:

Jointing Mortar. How To Instructions. Jointing Mortar: Equipment you may need include: Jointing Mortar How To Instructions The Jointing Mortar is a professional, rapid setting mortar which provides a contemporary and effective finish to paved areas. Jointing Mortar: Can fill joint widths

More information

BS 7533 Compliant Mortar Paving System

BS 7533 Compliant Mortar Paving System BS 7533 Compliant Mortar Paving System Bedding, Jointing, Sealing Urban Regeneration Specialists Case Study Castle Green, Taunton: Redevelopment of historic square Materials used: Ultrascape s BS 7533

More information

Setting the standard. The Emtek Ultrascape System comprises of: Welcome to Emtek. We have been providing quality products and services since 1994.

Setting the standard. The Emtek Ultrascape System comprises of: Welcome to Emtek. We have been providing quality products and services since 1994. Streetscape System Setting the standard Welcome to Emtek. We have been providing quality products and services since 1994. The Emtek Ultrascape System is setting the standard for high quality pavement

More information

BS 7533 Compliant Mortar Paving System

BS 7533 Compliant Mortar Paving System BS 7533 Compliant Mortar Paving System Bedding, Jointing, Sealing Urban Regeneration Specialists Case Study Castle Green, Taunton: Redevelopment of historic square Materials used: UltraScape s BS 7533

More information

CIVILS. Road Repair. Instarmac. UltraCrete Road Repair / Ancillaries

CIVILS. Road Repair. Instarmac. UltraCrete Road Repair / Ancillaries Road Repair Instarmac UltraCrete 296-298 Road Repair / Ancillaries UltraScape 299-300 Grout / Primer / Sealant / Cement / BS7533 Bedding Mortar CIVILS CIVILS / Road Repair 295 Instarmac UltraCrete Road

More information

TILE ADHESIVES GROUTS ANCILLARY PRODUCTS

TILE ADHESIVES GROUTS ANCILLARY PRODUCTS An Brand TILE ADHESIVES GROUTS ANCILLARY PRODUCTS Our innovation and dedication has allowed us to produce top quality tile adhesives, grouts and ancillary products for over 20 years. Contents Granfix

More information

BS 7533 Compliant Mortar Paving System & Associated Products

BS 7533 Compliant Mortar Paving System & Associated Products BS 7533 Compliant Mortar Paving System & Associated Products Urban Regeneration Specialist Bedding, Jointing, Sealing An Brand made in the UK the benefits of compliance Manufactured under the exacting

More information

BONDGROUT GP ( GENERAL PURPOSE NON-SHRINK STRUCTURAL GROUT) Page 1 / 7.

BONDGROUT GP ( GENERAL PURPOSE NON-SHRINK STRUCTURAL GROUT) Page 1 / 7. BONDGROUT GP Page 1 / 7. is a ready-mixed, non-shrink, nonmetallic, flowable, highstrength structural grout. contains a balanced blend of washed and graded silica sands, Portland cement flow improvement

More information

Urban Regeneration Specialist. Bedding, Jointing, Sealing

Urban Regeneration Specialist. Bedding, Jointing, Sealing Urban Regeneration Specialist Bedding, Jointing, Sealing An Brand made in the UK Instarmac is a Times Top 100 Company with a 2-star Best Companies Rating. Manufactured under the exacting requirements of

More information

Technical Manual - Section 7 Lytag LWA Roof and Floor Screeds

Technical Manual - Section 7 Lytag LWA Roof and Floor Screeds Uniclass L526+L5371:P224 EPIC E35+E451:X223 CI/SfB (43)+(47) Pq7 Technical Manual - Section 7 Lytag LWA Roof and Floor Screeds Introduction... 2 Weight saving... 3 Strength... 4 Shrinkage... 4 Thermal

More information

High performance shrinkage compensated cementitious grout

High performance shrinkage compensated cementitious grout Product Data Sheet Edition 4 March 2015 SikaGrout -212 HP High performance shrinkage compensated cementitious grout Description Uses Machine bedplates Anchor bolts. SikaGrout-212 HP is a ready mixed, high

More information

TECHNICAL INFORMATION SCREED

TECHNICAL INFORMATION SCREED TECHNICAL DATA SHEET SCREED Ver Nov 2015 TECHNICAL INFORMATION SCREED Product Data Sheet No. 110/01 INTRODUCTION Tarmac ready-to-use cement sand levelling screed is a correctly proportioned factory produced

More information

MPA tested! Quality for Professionals. plus Color. Cement Based Jointing Mortar. For light to heavy traffic loads. Cement-based, polymer-modified,

MPA tested! Quality for Professionals. plus Color. Cement Based Jointing Mortar. For light to heavy traffic loads. Cement-based, polymer-modified, plus Color For light to heavy traffic loads Cement-based, polymer-modified, rapidhardening joint mortar for the jointing of natural stone setts and concrete block paving for interior and exterior areas

More information

RLA CERAMIC TILE ADHESIVE 10 year Limited Warranty

RLA CERAMIC TILE ADHESIVE 10 year Limited Warranty RLA CERAMIC TILE ADHESIVE 10 year Limited Warranty RLA Polymers Pty Ltd; undertakes to warranty Resinflex (or RLA Flex 2- Part), and RLA Flex 1-Part, when used to install tiles over Protectowrap AFM for

More information

MasterEmaco S Lightweight, polymer modified, fibre reinforced, structural repair mortar. Formerly: Emaco Nanocrete R3 DESCRIPTION

MasterEmaco S Lightweight, polymer modified, fibre reinforced, structural repair mortar. Formerly: Emaco Nanocrete R3 DESCRIPTION DESCRIPTION MasterEmaco S 5300 is a single component, lightweight, polymer modified, high build structural repair mortar that meets the requirements of the new European Norm EN 1504 part 3 class R3. MasterEmaco

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL DATA SHEET TRUSCREED & TRUSCREED HD Ver July 2017 TECHNICAL INFORMATION TRUSCREED & TRUSCREED HD Product Data Sheet No. 110/05 INTRODUCTION Tarmac Truscreed and Truscreed HD systems were developed

More information

3 Nitomortar PE CI/SfB: (4-) Pr4 December 1999

3 Nitomortar PE CI/SfB: (4-) Pr4 December 1999 FM 610 3 High strength jointing and multi-purpose repair compounds Uses For fast and emergency reinstatement of concrete, bedding, jointing and reprofiling of concrete, masonry and brickwork. is ideally

More information

Flooring and Bedding. RonaFloor SL. Self-smoothing seamless epoxy resin flooring system

Flooring and Bedding. RonaFloor SL. Self-smoothing seamless epoxy resin flooring system FEATURES self smoothing epoxy floor screed seamless high strength decorative good chemical resistance easy to clean can be applied to green concrete with use of RonaFloor Epoxy DPM Description RonaFloor

More information

TECHNICAL INFORMATION CEMSCREED 5

TECHNICAL INFORMATION CEMSCREED 5 TECHNICAL DATA SHEET CEMSCREED 5 Ver May 2016 TECHNICAL INFORMATION CEMSCREED 5 Product Data Sheet No. 110/03 INTRODUCTION Tarmac Cemscreed 5 is a rapid drying floor screed developed by Tarmac to fulfil

More information

Suggested laying methods for STONE pavers

Suggested laying methods for STONE pavers Suggested laying methods for STONE pavers These suggestions are a guide only and should be used in addition to the relevant Australian Standards for trade practices. It is to be noted that installation

More information

INSTARMAC PERMANENT COLD LAY SURFACING MATERIALS ULTRACRETE INSTANT ROAD REPAIR 6 MM

INSTARMAC PERMANENT COLD LAY SURFACING MATERIALS ULTRACRETE INSTANT ROAD REPAIR 6 MM H A P A S Instarmac Group plc Danny Morson Way Birch Coppice Business Park Dordon, Tamworth Staffordshire B78 1SE Tel: 01827 872244 Fax: 01827 874466 HAPAS Certificate e-mail: enquiries@instarmac.co.uk

More information

E.MIX MOISTURE SEALER

E.MIX MOISTURE SEALER E.MIX Super Fast Fix Fast setting, high performance, high strength, highly flexible, strong polymerized thin bed tile adhesive for interior and exterior wall tile fixing complied with C2FTE class of EN

More information

Prove a d tested si ce ore t a 30 years!

Prove a d tested si ce ore t a 30 years! Mortar Systems Prove a d tested si ce ore t a 0 years! Jointing Mortar Adhesive Slurry Bedding Mortar Quality for professionals Since our foundation in 97, we have specialised in the development, production

More information

prospec.com Concrete Repair & Restoration

prospec.com Concrete Repair & Restoration prospec.com Concrete Repair & Restoration Table of Contents Product Portfolio 3 Product Enhancements 4 Product Selection Matrices 5 Construction Grout & Precast Non-shrink grouts C-1107 Construction Grout

More information

MasterEmaco N Universal, fast setting, polymer modified, fibre reinforced, repair and levelling mortar DESCRIPTION FIELD OF APPLICATION

MasterEmaco N Universal, fast setting, polymer modified, fibre reinforced, repair and levelling mortar DESCRIPTION FIELD OF APPLICATION DESCRIPTION is a universal, single component, polymer modified, fast setting, repair, reprofiling and levelling mortar that meets the requirements of the new European Norm EN 1504 part 3 class R2. is a

More information

Technical Manual Section 8 Rapid Drying Lightweight Screeds

Technical Manual Section 8 Rapid Drying Lightweight Screeds Uniclass L5371:P224 EPIC E451:X223 CI/SfB (-A) (23) Pq7 Technical Manual Section 8 Rapid Drying Lightweight Screeds Introduction 2 General 2 Application 3 Density 5 Hardening and drying times 5 Thermal

More information

DUAL EXPANSION. facilitate casting and ensure the total filling of voids even in tight or complex spaces and when working on large surfaces.

DUAL EXPANSION. facilitate casting and ensure the total filling of voids even in tight or complex spaces and when working on large surfaces. Fluid expansive mortar for precision anchoring of machinery and structural elements LAYER THICKNESS FROM 1 TO 10 CM REFURBISHMENT and PROTECTION Line Expansive cement-based mortar for anchoring and grouting

More information

RonaFloor Repair 1 Hour 2-6mm Repairs to floors Hard standings 2mm to 6mm

RonaFloor Repair 1 Hour 2-6mm Repairs to floors Hard standings 2mm to 6mm FEATURES ultra-rapid strength gain will accept heavy traffic after only 1 hour @ 20ºC low temperature application down to 10ºC pre-packed for ease of use and site control thin section applications down

More information

Waterproofing and Damp-proofing Cementitious Slurry

Waterproofing and Damp-proofing Cementitious Slurry Product Data Sheet Edition: 01/10/2012 Identification no. Version no: GCC SikaTop Seal-107 SikaTop Seal-107 Waterproofing and Damp-proofing Cementitious Slurry Product Description Uses SikaTop Seal-107

More information

Technical data sheet (TDS) Concretum Q-FLASH 2/20 Rapid-hardening concrete. 1. Description. Application

Technical data sheet (TDS) Concretum Q-FLASH 2/20 Rapid-hardening concrete. 1. Description. Application Technical data sheet (TDS) Concretum Q-FLASH 2/20 Rapid-hardening concrete 1. Description 1.1. Product Concretum Q-FLASH 2/20 is a rapid-hardening concrete comprising rapid-hardening cement Concretum Q-FLASH

More information

Supaflow HF Grout. Dual Expansion Class C Grout. Description. Areas of application. Features

Supaflow HF Grout. Dual Expansion Class C Grout. Description. Areas of application. Features Supaflow HF Grout Dual Expansion Class C Grout Description Supaflow HF is a free flowing cement based grout offering high performance and non-shrink characteristics. This product is suitable for pumping

More information

POLYMER-MODIFIED TILE ADHESIVES AND GROUTS FOR MODERN CONSTRUCTION. Edition 1.0

POLYMER-MODIFIED TILE ADHESIVES AND GROUTS FOR MODERN CONSTRUCTION. Edition 1.0 POLYMER-MODIFIED TILE ADHESIVES AND GROUTS FOR MODERN CONSTRUCTION Edition 1.0 Company overview Holderchem Building Chemicals S.A.L. was founded in 1994 as a joint venture with Holcim, the world s leading

More information

STONE PRODUCT SPECIFICATION SANDSTONE. Some typical installation methods are: Pedestrian traffic only: reinforced concrete* 75mm thick

STONE PRODUCT SPECIFICATION SANDSTONE. Some typical installation methods are: Pedestrian traffic only: reinforced concrete* 75mm thick Please note these tips are guides only and should be used in addition to the relevant Australian Standards for trade practices. Note that installation may vary from site to site with varying conditions

More information

ASH GROVE KOLORSTONE BROOMCOAT MIXING KIT. Spec Sheets Contents: Kolorstone Broomcoat Mixing Spec Sheet Kolorflex Admixture Spec Sheet

ASH GROVE KOLORSTONE BROOMCOAT MIXING KIT. Spec Sheets Contents: Kolorstone Broomcoat Mixing Spec Sheet Kolorflex Admixture Spec Sheet ASH GROVE KOLORSTONE BROOMCOAT MIXING KIT Spec Sheets Contents: Kolorstone Broomcoat Mixing Spec Sheet Kolorflex Admixture Spec Sheet kolor stone broomcoat 1. Product Name ASH GROVE KOLOR STONE Broomcoat

More information

AND SUPPORT SMOOTHING & LEVELLING LATEX BASED SPECIFICATION GUIDE // FLOORING RANGE LARTEX FLO LARTEX NA PRODUCT

AND SUPPORT SMOOTHING & LEVELLING LATEX BASED SPECIFICATION GUIDE // FLOORING RANGE LARTEX FLO LARTEX NA PRODUCT SERVICE AND SUPPORT S SMOOTHING & LEVELLING LATEX BASED SPECIFICATION GUIDE // FLOORING RANGE Lartex Flo is a specially formulated, professional latex designed for the contractor with added characteristics

More information

MasterEmaco S 5450 PG

MasterEmaco S 5450 PG DESCRIPTION MasterEmaco S 5450 PG is a single component, extra high strength, high modulus, and shrinkage compensated structural that meets the requirements of the new European Norm EN 1504 part 3 class

More information

Screedmaster Ultimate

Screedmaster Ultimate Screedmaster Ultimate TWO COMPONENT HIGH PERFORMANCE SMOOTHING COMPOUND Date: 25 July 2016 Fact Sheet No.: TDS00842 YOUR SMART ADVANTAGES PRODUCT CHARACTERISTICS Can be used under a surface DPM Self-smoothing

More information

EPILOX EPOXY BINDER TECHNICAL DATA SHEET. Multi-purpose High Performance Epoxy Binder System DESCRIPTION FEATURES AND BENEFITS

EPILOX EPOXY BINDER TECHNICAL DATA SHEET. Multi-purpose High Performance Epoxy Binder System DESCRIPTION FEATURES AND BENEFITS EPILOX EPOXY BINDER Multi-purpose High Performance Epoxy Binder System DESCRIPTION Aftek Epilox Epoxy Binder is a two part solvent free epoxy resin binder system for combining with selected fillers and

More information

TECHNICAL DATA SHEET SIKA RAPID REPAIR MORTAR 25KG

TECHNICAL DATA SHEET SIKA RAPID REPAIR MORTAR 25KG TECHNICAL DATA SHEET SIKA RAPID REPAIR MORTAR 25KG Sika Rapid Repair Mortar is a ready to use [just add water], quick setting mortar, based on special cements. It contains selected aggregates and admixtures

More information

EN R4 High Strength High Build Concrete Repair Mortar

EN R4 High Strength High Build Concrete Repair Mortar Product Data Sheet Edition 28th February 2018 Sika MonoTop-612 N EN 1504-3 R4 High Strength High Build Concrete Repair Mortar Construction Product Description Sika MonoTop-612 N is a cement-based, one

More information

Fast drying and setting cement for floor screeds (24 hours) hydraulic binder for shrinkage - compensated screeds

Fast drying and setting cement for floor screeds (24 hours) hydraulic binder for shrinkage - compensated screeds Mapecem Fast drying and setting cement for floor screeds (24 hours) hydraulic binder for shrinkage - compensated screeds WHERE TO USE Preparation of bonded, unbonded and floating screeds on existing and

More information

Waterproofing Systems. Cementitious.

Waterproofing Systems. Cementitious. Construction Joint 2 coats Triton TT55 + TTME OR 2 coats @ 0.75 kg/m² per coat Construction Joint 2 coats Triton TT55 OR 1 coat @ 1 kg/m² Screed Reinforced Concrete Waterproofing Systems Cementitious n

More information

PRODUCT DATA SHEET Sikadur -32 Normal

PRODUCT DATA SHEET Sikadur -32 Normal PRODUCT DATA SHEET 2-COMPONENT STRUCTURAL EPOXY BONDING AGENT PRODUCT DESCRIPTION is a moisture tolerant, structural, two part bonding agent, based on a combination of epoxy resins and special fillers,

More information

Polymer bonding aid and mortar additive bonding agent for old and new concrete. Test method Typical result Control. Compressive strength (BS6319,Pt2)

Polymer bonding aid and mortar additive bonding agent for old and new concrete. Test method Typical result Control. Compressive strength (BS6319,Pt2) Techno Bond SBR Polymer bonding aid and mortar additive bonding agent for old and new concrete Uses For improving the physical properties of cementations mixes. Typical uses include, but are not limited

More information

1-part polyurethane pourable self levelling floor joint sealant

1-part polyurethane pourable self levelling floor joint sealant Product Data Sheet Edition 29/03/2007 Identification no: 02 05 01 01 018 0 000001 1-part polyurethane pourable self levelling floor joint sealant Construction Product Description Uses Characteristics /

More information

R4 Hand Placed / Wet Spray Repair Microconcrete

R4 Hand Placed / Wet Spray Repair Microconcrete Product Data Sheet Edition 02/12/2014 Identification no: 01 03 02 04 001 0 000004 Sika MonoTop-612 R4 Hand Placed / Wet Spray Repair Microconcrete Construction Product Description Sika MonoTop-612 is a

More information

PRODUCT DATA SHEET Sikadur 31 CF Normal (formerly Sikadur 731)

PRODUCT DATA SHEET Sikadur 31 CF Normal (formerly Sikadur 731) PRODUCT DATA SHEET (formerly Sikadur 731) 2-part Thixotropic Epoxy Adhesive PRODUCT DESCRIPTION Sikadur-31 CF Normal is a solvent-free, moisture tolerant, thixotropic, structural two part adhesive and

More information

CP-24CC Potassium Silicate Concrete

CP-24CC Potassium Silicate Concrete CP-24CC Potassium Silicate Concrete PRODUCT DESCRIPTION Blome CP-24CC is a two component, potassium silicate concrete used for acid resistant pump pads, equipment pads, curbing, floors and sumps. CP-24CC

More information

Construction. Sikafloor -2 SynTop-2. Non-rusting hard aggregates dry shake floor hardener. Product Description. Product Data. Uses

Construction. Sikafloor -2 SynTop-2. Non-rusting hard aggregates dry shake floor hardener. Product Description. Product Data. Uses Product Data Sheet Edition 21 Oct 2011 Non-rusting hard aggregates dry shake floor hardener Product Description is a one part, preblended, synthetic dry shake hardener based on corundum (aluminium oxide)

More information

CHARACTERISTICS / ADVANTAGES

CHARACTERISTICS / ADVANTAGES PRODUCT DATA SHEET Water resistant, S.B.R. bonding agent and mortar additive PRODUCT DESCRIPTION Sika Latex is a modified styrene butadiene emulsion that is mixed normally with cement to form a bonding

More information

Construction. Sikadur -42 (au) High strength pourable epoxy resin grout. Product Datasheet Edition 4 March Description. Uses.

Construction. Sikadur -42 (au) High strength pourable epoxy resin grout. Product Datasheet Edition 4 March Description. Uses. Sikadur -42 (au) High strength pourable epoxy resin grout Description Uses Advantages Storage and Shelf Life Instructions for Use is a 3-component pourable or castable grout based on a solvent free epoxy

More information

Technical Data Sheet. Ultralevel Bulkout. Self Levelling High Build Cementitious Underlay

Technical Data Sheet. Ultralevel Bulkout. Self Levelling High Build Cementitious Underlay Technical Data Sheet Ultralevel Bulkout Self Levelling High Build Cementitious Underlay SMF26a 03.07.13 DESCRIPTION Bostik Ultralevel Bulkout is a high build, rapid hardening self levelling polymer modified

More information

Cempolatex 1 Pack A CEMENT BASED LATEX SUB-FLOOR SMOOTHING COMPOUND

Cempolatex 1 Pack A CEMENT BASED LATEX SUB-FLOOR SMOOTHING COMPOUND Cempolatex 1 Pack A CEMENT BASED LATEX SUB-FLOOR SMOOTHING COMPOUND Date: 12 January 2016 Fact Sheet No.: TDS00179 YOUR SMART ADVANTAGES Flexible and rapid setting Suitable for use with underfloor heating

More information

PRODUCT DATA SHEET Sika Level-315 F

PRODUCT DATA SHEET Sika Level-315 F PRODUCT DATA SHEET CEMENTITIOUS SELF LEVELLING, FAST DRYING, FIBRE REINFORCED UNDERLAYMENT FOR USE 3-15MM THICK ON INTERIOR FLOORS PRODUCT DESCRIPTION Sika Level-315 F is a one part, polymer modified,

More information

TECHNICAL DATA SHEET SIKADUR 31 CF NORMAL 6KG

TECHNICAL DATA SHEET SIKADUR 31 CF NORMAL 6KG TECHNICAL DATA SHEET SIKADUR 31 CF NORMAL 6KG Sikadur 31 is a two component solvent-free, cold cure, thixotropic epoxy adhesive suitable for damp and dry substrates. Available in two grades - Normal and

More information

High strength fibre reinforced structural repair mortar

High strength fibre reinforced structural repair mortar Product Data Sheet Edition 22/07/2009 Identification No: 04.05.060 High strength fibre reinforced structural repair mortar Product Description Sika Monotop Dynamic is a ready mixed polymer modified repair

More information

Cementitious Concrete Repair Mortar

Cementitious Concrete Repair Mortar Product Data Sheet Edition 08/05/2012 Identification no: 02 03 02 04 005 0 000009 SikaTop -122 Cementitious Concrete Repair Mortar Construction Product Description SikaTop -122 is a two component polymer

More information

Nitoflor FC150 (M) constructive solutions. Solvent free, high build, chemical resistance epoxy resin floor coating. Uses

Nitoflor FC150 (M) constructive solutions. Solvent free, high build, chemical resistance epoxy resin floor coating. Uses constructive solutions Solvent free, high build, chemical resistance epoxy resin floor coating Uses Nitoflor FC150 (M) provides a hard wearing, chemical and abrasion resistant floor finish. It is ideally

More information

Concrete Repair & Restoration

Concrete Repair & Restoration Concrete Repair & Restoration The ProSpec Product Portfolio ProSpec offers a broad range of cement-based, high-quality products to meet your project needs. The ProSpec portfolio includes a full line of

More information

R4 Hand Placed / Wet Spray Repair Microconcrete

R4 Hand Placed / Wet Spray Repair Microconcrete Product Data Sheet Edition 02/04/2009 Identification no: 01 03 02 04 001 0 000004 R4 Hand Placed / Wet Spray Repair Microconcrete Construction Product Description Sika MonoTop-612 is a cement-based, one

More information

CEMENTITIOUS FLOOR FINISH

CEMENTITIOUS FLOOR FINISH CEMENTITIOUS FLOOR FINISH I N I S H SELF LEVELING AUTOLIVELLANTE Self Leveling Cementitious Mortar A fine powder composed of cement, selected aggregates, additives and special synthetic resins. When mixed

More information

R3 Cementitious Pore Sealer and Levelling Mortar

R3 Cementitious Pore Sealer and Levelling Mortar Product Data Sheet Edition 15 June 2010 Identification no: 02 03 02 05 001 0 000042 (Template for local translation, only for internal use) Sika MonoTop -723 N R3 Cementitious Pore Sealer and Levelling

More information

ISO COMPANY K POLYSEAL G TWO PART GUN GRADE POLYSULPHIDE SEALANT

ISO COMPANY K POLYSEAL G TWO PART GUN GRADE POLYSULPHIDE SEALANT ISO 9001-2000 COMPANY K POLYSEAL G TWO PART GUN GRADE POLYSULPHIDE SEALANT DESCRIPTION KPOLYSEAL is a two part gun grade joint sealant based on a liquid polysulphide when mixed together, cure to form a

More information

TECHNICAL DATA SHEET AUS-CRETE PREMIUM INDUSTRIAL

TECHNICAL DATA SHEET AUS-CRETE PREMIUM INDUSTRIAL SUITABLE FOR HEAVY TRAFFIC, SWIMMING POOLS, TILE AND STONE FACADES INDUSTRIAL GRADE ADHESIVE EXTRA HEAVY DUTY SHOCK AND VIBRATION RESISTANT SUITABLE FOR: EXTRA LARGE TILE AND STONE ALL MASONRY SUBSTRATES

More information

Product Data Sheet Product Description Uses Characteristics / Advantages Tests Approval / Standards Product Data Construction Form

Product Data Sheet Product Description Uses Characteristics / Advantages  Tests Approval / Standards Product Data Construction Form Product Data Sheet Edition 19/10/2010 Identification no: 01 03 02 02 001 0 000001 Sika MonoTop -610 Sika MonoTop -610 Cementitious Based Steel Reinforcement Primer and Bonding Bridge Construction Product

More information

Construction. Cementitious self levelling, fast hardening, underlayment for use 2-10mm, and 10-30mm with added aggregate. Product Description

Construction. Cementitious self levelling, fast hardening, underlayment for use 2-10mm, and 10-30mm with added aggregate. Product Description Product Data Sheet Edition 17/08/2011 Identification no: 02 08 03 03 001 0 000003 Sika Level 100 Sika Level 100 Cementitious self levelling, fast hardening, underlayment for use 2-10mm, and 10-30mm with

More information

3-part thixotropic epoxy patching mortar

3-part thixotropic epoxy patching mortar Product Data Sheet Edition 28/08/2006 Identification no: 02 04 02 03 001 0 000044 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages Sikadur -41

More information

cl stuk Technical Sheet Recommended use Materials Substrate

cl stuk Technical Sheet Recommended use Materials Substrate Technical Sheet cl stuk cl-stuk is a latex which, mixed with cement-based grouts such as colorstuk n, reduces water absorption and enhances mechanical resistance and deformability. Specially recommended

More information

FLOORWORX SELF LEVELLING SCREED PRODUCT DATA_

FLOORWORX SELF LEVELLING SCREED PRODUCT DATA_ FLOORWORX SELF LEVELLING SCREED PRODUCT DATA_ DESCRIPTION FloorworX Self-Leveller is a single pack, rapid hardening cement based screed for levelling floors where quick setting is essential. FloorworX

More information

HP and RG POLYMERIC SANDS for PAVEMENT JOINTS

HP and RG POLYMERIC SANDS for PAVEMENT JOINTS TECHNICAL DATA SHEET HP and RG POLYMERIC SANDS for PAVEMENT JOINTS 66 lb. Choice of colors Tan / Ochre Grey UPDATE November 24, 2006 Make sure that you have an up-to-date technical data sheet at hand.

More information

SEALING PAVEMENT CRACKS WITH HIGH MOLECULAR WEIGHT METHACRYLATES

SEALING PAVEMENT CRACKS WITH HIGH MOLECULAR WEIGHT METHACRYLATES SEALING PAVEMENT CRACKS WITH HIGH MOLECULAR WEIGHT METHACRYLATES 1. SCOPE This specification covers the materials, techniques, and workmanship requirements for sealing portland cement concrete (PCC) pavement

More information

Hanson Multicem is manufactured to comply with the requirements of BS EN CEM II/A-LL (Portlandlimestone cement) strength class 32,5R.

Hanson Multicem is manufactured to comply with the requirements of BS EN CEM II/A-LL (Portlandlimestone cement) strength class 32,5R. Hanson Multicem technical Data Sheet Hanson Multicem is manufactured to comply with the requirements of BS EN 197-1 CEM II/A-LL (Portlandlimestone cement) strength class 32,5R. Multicem incorporates a

More information

Emer-Proof Quick Dry Two Part

Emer-Proof Quick Dry Two Part Technical Data Sheet Polymer / cementitious two part waterproofing membrane Uses is suitable for a wide range of waterproofing applications such as: Podiums, terraces, balconies, and deck areas under toppings,

More information

TECHNICAL DATA SHEET SIKADUR 31 RAPID 1.2KG

TECHNICAL DATA SHEET SIKADUR 31 RAPID 1.2KG TECHNICAL DATA SHEET SIKADUR 31 RAPID 1.2KG Sikadur -31 is a two component solvent free, cold cure, thixotropic epoxy adhesive suitable for damp and dry substrates. Available in two grades - 31CF Normal

More information

3-component epoxy self-smoothing screed

3-component epoxy self-smoothing screed Construction Product Data Sheet Edition 26/07/2016 Identification no: 01 08 01 02 050 0 000017 3-component epoxy self-smoothing screed Product Description Uses Characteristics / Advantages Product Data

More information

Product Data Sheet. Description. Uses. Suitable Surfaces. Polymer enhanced, pre-blended, bag mix, coarse float render.

Product Data Sheet. Description. Uses. Suitable Surfaces. Polymer enhanced, pre-blended, bag mix, coarse float render. Product Data Sheet Render MaxiCoarse Polymer enhanced, pre-blended, bag mix, coarse float render. Description MaxiCoarse Render is a pre-blended, polymer fortified cement based render mix, formulated to

More information

Bonding Primer and Reinforcement Corrosion Protection

Bonding Primer and Reinforcement Corrosion Protection Product Data Sheet Edition 24/07/2012 Identification no: 01 03 02 01 001 0 000001 SikaTop Armatec -110 EpoCem Bonding Primer and Reinforcement Corrosion Protection Construction Product Description SikaTop

More information

ECO OUTDOOR INSTALLATION TIPS FLOORING PORPHYRY

ECO OUTDOOR INSTALLATION TIPS FLOORING PORPHYRY ECO OUTDOOR INSTALLATION TIPS FLOORING PORPHYRY FLOORING WALLING FURNITURE WWW.ECOOUTDOORUSA.COM Installations Tips Please note these tips are guides only and should be used in addition to the relevant

More information

Product Data Sheet Sikadur -31 CF Normal Product Description Uses ruction Const Characteristics / Advantages

Product Data Sheet Sikadur -31 CF Normal Product Description Uses ruction Const Characteristics / Advantages Construction Product Data Sheet Edition 02/12/2013 Identification no: 02 04 02 03 001 0 000039 Sikadur -31 CF Normal 2-part thixotropic epoxy adhesive Product Description Uses Characteristics / Advantages

More information

Flowcrete MF (4mm) Technical Profile

Flowcrete MF (4mm)   Technical Profile Technical Profile FIRE RESISTANCE EN 13501-1 SLIP RESISTANCE Method described in AS4586-2013 B FL - s1 Dry & Wet Rating is dependant on specification (in accordance with AS4586-2013) Flowcrete MF (4mm)

More information

SUPER multi purpose structural adhesive. Polymer admixture for cement systems

SUPER multi purpose structural adhesive. Polymer admixture for cement systems SUPER multi purpose structural adhesive. Polymer admixture for cement systems DESCRIPTION A polymer admixture based upon Styrene Butadiene Co-polymer for use in concrete, renders, screeds, pointing and

More information

Construction. Type N and Type R. 2-part epoxy adhesive Part of the Sikadur -Combiflex System. Product Description

Construction. Type N and Type R. 2-part epoxy adhesive Part of the Sikadur -Combiflex System. Product Description Product Data Sheet Version 2015-02-12 Identification no: 02 07 03 02 003 0 000002 Sikadur -Combiflex CF Adhesive Sikadur -Combiflex CF Adhesive 2-part epoxy adhesive Part of the Sikadur -Combiflex System

More information

TECHNICAL DATA. General Purpose Epoxy Mortar Binder

TECHNICAL DATA. General Purpose Epoxy Mortar Binder TECHNICAL DATA General Purpose Epoxy Mortar Binder Epirez 133 Description General Purpose Epoxy Mortar Binder is a truly remarkable product. First developed in 1970, it now has the unique distinction of

More information

Non-metallic dry shake floor hardener

Non-metallic dry shake floor hardener Product Data Sheet Edition 08/08/2008 Identification no: 01 08 03 04 001 0 000012 Sikafloor -2 SynTop Non-metallic dry shake floor hardener Construction Product Description Uses Characteristics / Advantages

More information

Westbuild PRO. Rapid Drying Wet Area Waterproofing. Polyurethane (PU) modified, permanently flexible, rapid drying, class III waterproof membrane.

Westbuild PRO. Rapid Drying Wet Area Waterproofing. Polyurethane (PU) modified, permanently flexible, rapid drying, class III waterproof membrane. Westbuild PRO Rapid Drying Wet Area Waterproofing Polyurethane (PU) modified, permanently flexible, rapid drying, class III waterproof membrane. Westbuild PRO Wet Area Waterproofing is highly flexible

More information

R4 Fast Setting Cementitious Repair Mortar

R4 Fast Setting Cementitious Repair Mortar Product Data Sheet Edition 13/03/2009 Identification no: 01 03 02 02 001 0 000022 R4 Fast Setting Cementitious Repair Mortar Construction Product Description Sika Rapid Repair Mortar is a one component

More information

High strength mortars and concretes are conveniently prepared by combining General Purpose Epoxy Mortar Binder (133) and Epirez Aggregates.

High strength mortars and concretes are conveniently prepared by combining General Purpose Epoxy Mortar Binder (133) and Epirez Aggregates. Epirez 133 Description General Purpose Epoxy Mortar Binder (133) is a truly remarkable product. First developed in 1970, it now has the unique distinction of being the most widely specified epoxy based

More information

TECHNICAL DATA SHEET AUS-BOND INDUSTRIAL LATEX ADMIX

TECHNICAL DATA SHEET AUS-BOND INDUSTRIAL LATEX ADMIX Description: Aus-Bond Industrial Latex Admix is a specially formulated latex admix for use in sand/cement based mortars for extreme conditions such as swimming pools, facades, rapid transit stations and

More information

RITIVEX R LIQUID 1102

RITIVEX R LIQUID 1102 RITIVEX R LIQUID 1102 EDITION: SEPTEMBER 2013 ADHESIVE, ACRYLIC RESIN FOR MULTIPLE USES GENERAL CHARACTERISTICS Acrylic, adhesive, joining resin, water - diluted. It is combined with all cementitious mortars

More information

colorstuk 2-12 Ceramic tiles with relief to be covered with grouting material.

colorstuk 2-12 Ceramic tiles with relief to be covered with grouting material. Technical Sheet colorstuk 2-12 colorstuk 2-12 is a type CG 2 fine grain grouting material as per EN 13888, for grouting joints from 2 to 12 mm. It is easy to apply, resistant and color stable, and it is

More information

Due to increased resistance to chemicals it can also be used for the protection of (1): gathering shafts and fuel pools, concrete silos, Etc.

Due to increased resistance to chemicals it can also be used for the protection of (1): gathering shafts and fuel pools, concrete silos, Etc. Tehnični list proizvoda, izdaja 6/2017 - ANG EN 1504-2: covering/coating PROPERTIES Hidroizol S is a dry mixture of cement, flint sands and special admixtures to increase water impermeability, resistance

More information

Crystoflex Max comprising of a liquid component of selected polymers and a powder component of selected cements, fillers and aggregates.

Crystoflex Max comprising of a liquid component of selected polymers and a powder component of selected cements, fillers and aggregates. Product Data Sheet Crystoflex Max Two pack, flexible, cementitious waterproofing membrane for positive or negative water pressure. Description Crystoflex Max is a two pack, flexible, cementitious waterproof

More information

TECHNICAL DATA SHEET AUS-CRETE MPA

TECHNICAL DATA SHEET AUS-CRETE MPA MULTI-PURPOSE ADHESIVE WALLS AND FLOORS DOMESTIC AND COMMERCIAL TILE AND STONE SUITABLE FOR: LARGE TILE AND STONE ALL MASONRY SURFACES MARBLE AND GRANITE RENDER, BRICK AND BLOCK WORK PORCELAIN CEMENT SHEET

More information

Construction. Type N and Type R. 2-part epoxy adhesive Part of the Sikadur -Combiflex System. Product Description. Tests

Construction. Type N and Type R. 2-part epoxy adhesive Part of the Sikadur -Combiflex System. Product Description. Tests Product Data Sheet Edition 05/01/2009 Identification no: 02 07 03 02 003 0 000002 Type N and Type R Sikadur -Combiflex CF Adhesive Type N and Type R Construction 2-part epoxy adhesive Part of the Sikadur

More information

vdw 870 Quality for Professionals Paving Joint Sand Stabiliser For domestic areas

vdw 870 Quality for Professionals Paving Joint Sand Stabiliser For domestic areas vdw 870 For domestic areas For stabilising sand filled joints in paved areas with natural stone setts and slabs, concrete blocks and slabs or brick paving etc. Suitable for new and refurbishment use in

More information

OMNITEK Deco is suitable for all leveling and thin layer concrete repair applications, such as:

OMNITEK Deco is suitable for all leveling and thin layer concrete repair applications, such as: OMNITEK Deco High strength leveling mortar, Class R4 Product Description OMNITEK Deco is a high strength, cement based, volume stable mortar, suitable for leveling and finishing of concrete surfaces in

More information

ARDEX GUIDE SPECIFICATION ARDEX MC RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX ARDIFLO Pump System Underlayments

ARDEX GUIDE SPECIFICATION ARDEX MC RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX ARDIFLO Pump System Underlayments ARDEX GUIDE SPECIFICATION ARDEX MC RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX ARDIFLO Pump System Underlayments SECTION 07 26 19 TOPICAL MOISTURE VAPOR EMISSION SYSTEM WITH ARDEX

More information

Construction. Coloured mineral dry shake floor hardener. Product Description. Product Data. Tests. Form. Storage

Construction. Coloured mineral dry shake floor hardener. Product Description. Product Data. Tests. Form. Storage Product Data Sheet Edition 20/11/2006 Identification no: 02 08 03 04 001 0 000013 Sikafloor -3 QuartzTop ZA Coloured mineral dry shake floor hardener Construction Product Description Uses Characteristics

More information

AQUATEK Impercem 10HB

AQUATEK Impercem 10HB AQUATEK Impercem 10HB Rigid waterproofing mortar Product Description AQUATEK Advantages Impercem 10HB is a rigid, cement based mortar for waterproofing of concrete and masonry. High adhesion and performance

More information

colorstuk 0-4 Technical Sheet Recommended use Materials Substrates Characteristics

colorstuk 0-4 Technical Sheet Recommended use Materials Substrates Characteristics Technical Sheet colorstuk 0-4 colorstuk 0-4 is a type CG 2 fine grain grouting material as per EN 13888, for grouting joints up to 4 mm. It is easy to apply, resistant and color stable, and it is specially

More information