Products for the Tiling Industry

Transcription

1 s for the Tiling Industry

2 Preparation Screedmaster Universal Primer Screedmaster Epoxy Primer Screedmaster Flex Screedmaster Deep Screedmaster Universal Primer is a water based solvent free, acrylic dispersion primer. Use as a primer/ bonding agent prior to the application of any of the Screedmaster range of smoothing compounds. In undiluted form it can be used on all smooth and dense surfaces, power floated concrete, ceramic tile, quarry tile, rigid metal, terrazzo, asphalt and surface membranes. In diluted form (1 : 2 with clean water) it can be used on porous substrates, including sand/cement and wooden boards etc. - A bonding agent for non-porous surfaces - A primer for porous surfaces - For fast track installations Screedmaster Epoxy Primer is a non-flammable, two component water dispersible epoxy primer containing exact quantities of resin and hardener, ready for mixing together. Curing is by chemical reaction, producing a semi-gloss film finish. The primer is coloured to identify coated areas. Screedmaster Epoxy Primer can be used as a primer/ bonding agent prior to the application of any of the Screedmaster range of smoothing compounds. It can be used on all smooth and dense surfaces, power floated concrete, ceramic tiles, quarry tiles, terrazzo, rigid metal, asphalt and surface membranes. Screedmaster Epoxy Primer may be used as a barrier primer on anhydrite (calcium sulphate) screeds prior to application of cementitious materials. For further information please contact Flooring Technical Services. - High specification primer - Bonding agent Screedmaster Flex, fibre-reinforced underlayment is a one part compound developed for use on subfloors where vibration and minimal thermal movement can be problematic. It can be applied between 3 to 30mm thickness in a single application (5 mm maximum total thickness on mastic asphalt screeds). It is suitable for use with warm water underfloor heating installations provided a maximum surface temperature of 27 C is not exceeded. The heating must be switched off at least 48 hours before and after application. As Screedmaster Flex is totally protein and casein free it is suitable for use in biologically sensitive areas. The low odour formulation makes Screedmaster Flex ideal for use in occupied buildings. It is suitable for normal wear in commercial locations. - Fibre re-inforced - Rapid setting Screedmaster Deep is a protein-free, high strength, high performance, deep self-levelling compound based on a blend of cements and organic binders. It is suitable for raising floor levels and levelling uneven sub-floors in light to heavy-duty internal applications. The versatility of Screedmaster Deep allows for application between 5mm and 50mm in a single step. It is suitable for interior use. Screedmaster Deep is suitable for use with warm water underfloor heating installations provided a temperature of 27 C is not exceeded. The heating must be switched off at least 48 hours before and after application. - Foot traffic in just 1.5 hours - Ceramic tiles/textile coverings in just 3 to 4 hours - Suitable as a barrier on calcium sulphate - Suitable under parquet/wood floors - Suitable for the direct laying of vinyl Water based polymer mix Undiluted as a bonding aid: m 2 approx. Diluted as a primer: m 2 approx. Part A Solvent-free Part B Water based 50 to 60 m 2 (on smooth surfaces) 100 to 150 m 2 (when diluted) Compressive Cement powder/fibre Approx. 5.2m² per 3mm layer 30 N/mm² after 28 days Blend of cements and organic binders Approx. 2.7m² at 5mm Approx. 1.35m² at 10mm Approx. 0.65m² at 20mm Approx. 0.27m² at 50mm Gravity Service Temperature Drying Approx. 1.0 Up to 40 C 1 hour under good drying conditions Store for up to 12 months from date of manufacture when stored in original, unopened packaging under cool, dry conditions within the temperature range of +5 C to +40 C and out of direct sunlight. Protect from frost. 5 litre 5 litre (x4) Gravity Temperature Drying Approx C to +40 C Overnight (13 C or above) Store for up to 12 months from date of manufacture when stored in original, unopened packaging under cool, dry conditions within the temperature range of +5 C to +40 C and out of direct sunlight. Protect from frost. 6 kg unit (5 kg resin and 1 kg hardener) 6 kg Flexural 7 N/mm² after 28 days 3mm to 30mm Approx. 5 litres of water to 25kg bag Approx. 20 minutes after mixing at 18 o C Foot Traffic: 4 hours (<3mm thickness) at 18 C Loose Lay Floor Coverings: 8 hours (<3mm thickness) at 18 C 25kg polylined paper sacks 25kg mm to 50mm Approx. 3.5 litres of water to 25kg bag Approx. 20 minutes after mixing at 18 o C Foot traffic: 1.5 hours at 20 C 3 to 4 hours at 10 C Ceramic/textile coverings: 3 to 4 hours (<10mm thickness) at 20 C 24 hours (<10mm thickness) at 10 C Vinyl floorcoverings: 24 hours per 10mm thickness at 20 C 20kg polylined paper sacks 20kg bag

3 Preparation Cementitious Adhesives Screedmaster Speed Screedmaster Ultimate MC310 OPF MC250 Vitri-Flex Screedmaster Speed is a two-part, high strength, polymer modified, cementitious underlayment for smoothing uneven floors prior to laying decorative floor coverings. It is suitable for use with warm water underfloor heating installations provided a maximum surface temperature of 27 C is not exceeded. The heating must be switched off at least 48 hours before and after application. Screedmaster Speed can be laid over most common substrates including: cementitious screeds, concrete floors, calcium sulphate screeds, sound strong asphalt and other strong, rigid subfloors. - Self smoothing - Protein-free - Low odour Screedmaster Ultimate is a two-part, protein and casein free, cementitious underlayment for smoothing uneven floors prior to laying decorative floor coverings. It is suitable for use with warm water underfloor heating installations provided a maximum surface temperature of 27 C is not exceeded. The heating must be switched off at least 48 hours before and after application. Screedmaster Ultimate has excellent workability and flow characteristics, is self-smoothing and can be trowelled to a feather edge. - Can be used under a surface dpm - Excellent flow characteristics - Protein-free and low odour MC310 OPF is a non-slip, flexible wall & floor tile adhesive which only requires the addition of water for use. MC310 OPF may be used for fixing ceramic, large format porcelain, mosaic, quarry, terrazzo and natural stone tiles to most standard interior and exterior installations such as swimming pools, plywood overlay, under-floor heating and areas subject to limited vibration. It will bond to correctly prepared calcium sulphate (anhydrite) screeds & gypsum plaster, concrete, plasterboard, sand/ cement render / screeds, block-work, brickwork, glazed surface, vinyl tiles etc. - High water resistance - suitable for swimming pools and wet rooms - Formulated for large format floor tiles, natural stone, porcelain, terrazzo and slate MC250 Vitri-Flex is a fast setting, thin or thick bed adhesive. It is suitable for bonding ceramic tiles, quarry tiles, porcelain, vitrified tiles, natural stone and mosaics to wall and floors. MC250 Vitri-Flex is formulated for fast track installation and enables tiles to be grouted approx. 2 to 3 hours after fixing depending on conditions. The product gives excellent grip and adhesion. MC250 Vitri-Flex is suitable for most interior and exterior installations including more demanding installations, such as use with underfloor heating and areas subject to limited vibration. When fully cured the adhesive is suitable for permanently wet areas such as showers. It will bond to concrete, plaster, sand / cement render and screeds, blockwork, brickwork, glazed surfaces, vinyl tiles, plywood overlay, etc. - Enhanced adhesion to fully vitrified, porcelain and stone tiles - Needs no flexible additives - just mix with water FEATHER EDGE UP TO 20mm Compressive Flexural Cement powder Latex liquid Approx. 5m 2 to 6m 2 at 3mm thickness Approx. 3m 2 at 5mm thickness 30 N/mm² after 28 days 7.5 N/mm² after 28 days 2mm to 20mm 5 litres of latex liquid per 25kg bag Approx. 5 to 10 minutes after mixing at 18 o C Foot Traffic: 1 hours (<5mm thickness) at 20 C Floor Coverings: 3 hours (<5mm thickness) at 20 C 25kg polylined paper sacks 5L Polyjerry 25kg bag 5 litre (x4) Cement powderlatex liquid Approx. 4m 2 to 5m 2 at 3mm thickness Minimum 3mm thickness 4.3 litres of latex liquid per 20kg bag Approx. 20 minutes after mixing at 18 o C Foot Traffic: 1.5 hours (<3mm thickness) at 20 C Loose Lay Floor Coverings: 8 hours (<3mm thickness) at 20 C Bond Floor Coverings: 12 hours (<3mm thickness) at 20 C On Non Absorbent Subfloors Lay Floor Coverings: 24 hours (<3mm thickness) at 20 C 20kg polylined paper sacks 4.3L Polyjerry 20kg bag 4.3 litre (x4) Polymer modified cement powder Grey and kg/m 2 per millimetre thickness Approx. 5.4 litres of water to 20 kg bag Approx. 3 to 4 hours at 20 o C Store in dry conditions for a maximum of 12 months Grey 20kg 20kg Polymer modified cement powder Grey and kg/m 2 per millimetre thickness Approx. 4.4 litres of water to 20 kg bag Approx. 2 to 3 hours at 20 o C Store in dry conditions for a maximum Grey 20kg 20kg

4 Cementitious Adhesives MC210 Stone Flex MC260 Stone Flex Rapid MC100 Porcelain Standard MC160 Porcelain Rapid MC210 Stone Flex is a specially prepared cement based adhesive which only requires the addition of water. For use as a thick bed adhesive, suitable for internal and external floor and wall tiling. MC210 Stone Flex adhesive may be used for fixing large format ceramic, natural stone floor tiles, non-porous tiles such as fully vitrified and porcelain stoneware, terrazzo tiles and slabs, and concrete tiles. For light coloured natural stone (i.e. marble/limestone), test for shading and show through before use. - Thick bed applications up to 25mm - Non-slump, suitable for large format floor tiles, natural stone, marble and slate MC260 Stone Flex Rapid is a specially prepared cement based adhesive which only requires the addition of water. For use as a thick and thin bed adhesive, suitable for internal and external floor and wall tiling. MC260 Stone Flex Rapid adhesive may be used for fixing ceramic, natural stone floor tiles, non-porous tiles such as fully vitrified and porcelain stoneware, terrazzo tiles, slabs and concrete tiles. For light coloured natural stone (i.e. marble/limestone), test for shading and show through before use. MC260 Stone Flex Rapid is formulated for fast track installation and enables tiles to be grouted approx. 2 to 3 hours after fixing depending on conditions. - Thick bed applications up to 20mm - Excellent Flexibility MC100 Porcelain Standard is a white non-slip wall & floor tile adhesive which may be used for fixing tiles to most types of clean, stable solid masonry surfaces. MC100 Porcelain Standard is recommended for fixing ceramic, large format, porcelain, natural stone tiles and mosaics to interior or exterior surfaces including correctly prepared & sealed calcium sulphate (anhydrite) screeds & gypsum plaster, concrete, plasterboard, sand / cement render / screeds, block-work, brickwork & rigidly braced tile backer boards. - Fixes large format wall & floor porcelain & natural stone tiles - Non - slip formulation - Interior & exterior use MC160 Porcelain Rapid is a fast setting, thin or thick bed adhesive. It is suitable for bonding ceramic tiles, quarry tiles, terracotta tiles, and mosaics to walls and floors. It is also suitable for bonding porcelain tiles to dry concrete floors. MC160 Porcelain Rapid is formulated for fast track installation and enables tiles to be grouted approx. 2 to 3 hours after fixing depending on conditions. The product gives excellent grip and adhesion. MC160 Porcelain Rapid is suitable for most standard interior and exterior installations. It will bond to concrete, plaster, sand/cement render and screeds, blockwork, brickwork, glazed surfaces, vinyl tiles etc. - Polymer modified for porcelain, fully vitrified, ceramic and natural stone tiles - Suitable for thin and thick bed application - Fast set formulation - sets in 2 to 3 hours C2TE C2FT S1 C1TE 24h C2FT Grey kg/m 2 per millimetre thickness Approx. 4.8 litres of water to 20 kg bag Approx. 3 to 4 hours at 20 o C kg/m 2 per millimetre thickness Approx. 4.4 litres of water to 20 kg bag Approx. 2 to 3 hours at 20 o C kg/m 2 per millimetre thickness Approx. 5.6 to 6 litres of water to 20 kg bag Approx. 5 hours at 20 o C kg/m 2 per millimetre thickness Approx. 4.4 litres of water to 20 kg bag Approx. 2 to 3 hours at 20 o C No of 12 months of 6 months of 12 months of 6 months 20kg kg kg Grey 20kg

5 Additive Ready Mixed Adhesives AP 250 Flexibond A100 Showerproof A150 Super-Grip A200 Power Showerproof AP 250 Flexibond is an acrylic dispersion for use as a flexible admixture with cement based tile adhesives and/or grouts. It can further be used as a primer/sealer for ready mixed tile adhesives and floor underlayment screeds. The addition of AP 250 Flexibond to a non-polymer modified adhesive or grout is required where surfaces are prone to very minor movement and vibration, or where direct fixing to glazed tiles or other impermeable surfaces is required. - Improves flexibility and tensile strength giving greater resistance to minor movements and vibration. - Reduces permeability. - Enhanced adhesion when fixing to non-porous substrates and tiles. A100 Showerproof Wall Tile Adhesive is designed for fixing ceramic wall tiles to most internal surfaces. It should not be used for fixing onto floors. The main uses for A100 Showerproof Wall Tile Adhesive would be for fixing of ceramic wall tiles to kitchens, toilets, domestic showers and bathrooms. A100 Showerproof Wall Tile Adhesive should not be used externally, or in areas of continuous immersion e.g. swimming pools. For these applications use a cement based adhesive. - High bonding strength - - no grout discolouration - Excellent adhesion to a wide range of substrates A150 Super-Grip Wall Tile Adhesive is designed for fixing ceramic wall tiles to most internal surfaces. It should not be used for fixing onto floors. The main use for A150 Super-Grip Wall Tile Adhesive is for fixing of ceramic wall tiles to kitchens, toilets, domestic showers and bathrooms. If you are using large format tiles the drying time will be greatly extended. It should not be used externally or in areas where tiling is continuously immersed in water, e.g. swimming pools. For these applications use a cement based adhesive. - High bonding strength - Exceptional non-slip properties - Advanced Acrylic formulation A200 Power Showerproof Wall Tile Adhesive is specially formulated to resist the conditions that exist in modern shower areas where high pressure pumped jets of water are a feature of the installation. It is a versatile, non-slip water resistant acrylic adhesive and is suitable for a wide range of applications including intermittently wet and dry internal areas in domestic situations. A200 Power Showerproof Wall Tile Adhesive should not be used externally, or in areas of continuous immersion e.g. swimming pools. For these applications use a cement based adhesive. - Flexible - Water resistant - Ideal for bonding mosaics IMPROVES FLEXIBILITY D2TE WHITE Acyclic dispersion polymer Gypsum based formulation Acrylic dispersion based formulation Off Acrylic dispersion based formulation As a diluted primer 2.5 litres will cover approximately 75 m² Approximately 2.5 litres of diluted Flexibond per 20 kg adhesive Approximately 0.5 litres of diluted Flexibond per 5 kg of grout 1 part Flexibond to 2 parts water when using as a flexible additive and as a primer. Shelf life 18 months when stored in dry conditions within the temperature range. Protect from frost. Approx. 0.8 litres per m 2 Standard backgrounds: Impervious backgrounds: Approx. 72 hours at 20 o C Up to 24 months in a tightly sealed container when stored in cool, dry conditions in the temperature range 5 C to 25 C. 15 litre, 10 litre, 5 litre, 2.5 litre buckets Approx. 0.8 litres per m 2 Standard backgrounds: Impervious backgrounds: Approx. 72 hours at 20 o C Up to 24 months in a tightly sealed container when stored in cool, dry conditions in the temperature range 5 C to 25 C. Approx. 0.8 litres per m 2 Standard backgrounds: Impervious backgrounds: Approx. 72 hours at 20 o C Up to 24 months in a tightly sealed container when stored in cool, dry conditions in the temperature range 5 C to 25 C. 2.5L Polyjerry 2.5 litre (x6) litre 10 litre 5 litre 2.5 litre litre buckets 10 litre litre buckets 10 litre

6 Grouts J100 Smooth Finish Grout J125 Flexible Grout J175 Wide Joint Grout J200 SGS Pourable Grout J100 Smooth Finish Grout is a professional quality, cementitious polymer modified grout for walls and floors. It is formulated to provide narrow to wide joints. J100 Smooth Finish Grout is an easy clean off, non slump formulation and dries to a very hard finish. Suitable for use with a variety of tile types including ceramic, porcelain, natural stone, mosaic and marble. It is suitable for joints between 2mm and 12mm for both interior and exterior use. - Suitable for swimming pools and power showers - Mould and efflorescence resistant - Non-slump formulation for joints up to 12mm wide J125 Flexible Grout is a professional quality, cementitious polymer modified grout for walls and floors. It is formulated to provide narrow to wide joint easy clean off, non-slump and dries with a very hard finish. Suitable for use with all types of ceramic and porcelain tiles, mosaics, natural stone, marble, quarry tiles etc. It is suitable for joints between 2mm and 15mm as well as exterior and interior use. - Suitable for swimming pools and power showers - Mould and efflorescense resistant - Fills deep joints in one application J175 Wide Joint Grout is a cement-based, grout suitable for internal and external applications for glazed and unglazed wall and floor tiles. It is suitable for joints up to 22mm wide. Grouting of joints should not be carried out for a least 24 hours after completion of tiling. It is not necessary to wet tile joints before application as J175 Wide Joint Grout has excellent adhesion to dry tiles. J175 can be made to be flexible with the addition of AP250 Flexibond. - Fills deep joints in one application - Does not slump in the joint - Extremely water resistant J200 SGS Pourable Grout is a rapid-setting powder grout for ceramic floor tiling on various substrates. This product contains a fine blend of cements and polymeric additives and is recommended when grouting areas subject to high mechanical stresses. It is suitable for permanently wet areas and can be used for joint widths from 3 to 15mm in indoor and outdoor locations. - Excellent flexibility and durability - Suitable for use on timber without an admixture - Will not slump in joints of 3 to 15mm Cement based formulation, Jasmine, Grey G = gravity Approx litres of water to 10 kg of powder Approx. 2 hours at 20 o C Walk on: 12 hours at 20 o C of 12 months 10 kg and 3.5 kg Grey 3.5kg 10kg 3.5kg Jasmine 10kg Jasmine 3.5kg Polymer modified cement based formulation Grey,, Jasmine, Limestone, Sandstone, Anthracite G = gravity Approx. 1.1 litres of water to 5 kg of powder Approx. 2 hours at 20 o C Walk on: 12 hours at 20 o C of 12 months 10 kg and 5 kg Grey 5kg 10kg 5kg Jasmine 10kg Jasmine 5kg Limestone 5kg Sandstone 5kg Anthracite 5kg Polymer modified cement based formulation Grey and Ivory G = gravity Approx. 2.4 litres of water to 10 kg of powder Approx. 2 hours at 20 o C Walk on: 12 hours at 20 o C of 12 months 10 kg Ivory 10kg Polymer modified cement based formulation Grey G = gravity litres of water to 10 kg of powder Walk on: 3 to 4 hours at 20 o C 10 kg

7 Smart help: + 44 (0) Refer to product data and safety sheets for full instructions and precautions in use. Recommendations and suggestions are for guidance only, since conditions of use are completely beyond our control. Ltd., Common Road, Stafford, ST16 3EH, U.K. Tel: +44 (0) Industries Ltd., Newtown, Swords, Co. Dublin, Ireland Tel: