CemWash. the cement innovation company

Size: px
Start display at page:

Download "CemWash. the cement innovation company"

Transcription

1 CemWash the cement innovation company

2 CemWash Data Sheet Description A decorative, coloured, waterproof cement finish. Having a base of portland cement, it sets rock-hard, is UV resistant, economical and extremely durable. It is supplied in powder form requiring only the addition of clean water before being applied with a large blockbrush. Purpose To provide a tough, waterproof, durable cementbased coating directly to brick, block or hard cured plaster walls. SABS The sample tested satisfied the standard rain penetration test as described in the SABS code of practice (section 3, part K rule KK-17, table 8) conducted for a 24 hour period (for mean annual rainfall of more than 1000mm and an hourly mean windspeed of 30mm/s) to cover requirements for all areas in South Africa, at the water spray rate of 40-50mm/hour on single 100mm cement brick walls. Test report on single coat available on request. Agrément Tested and approved fit for purpose for use as a waterproof cementitious coating when used as specified in Agrément Certificate No. 2000/278. Only coatings applied by approved applicators can claim certification. Types One type only, but can be used in conjunction with CemBond when applied to smooth, previously painted or friable surfaces (see the CemBond data sheet). Specifying Cemcrete CemWash applied in two coats (first coat being CemWash Primer; second coat CemWash colour) of an approved colour using a large whitewash block-brush in accordance with the manufacturer s instructions. Applications Recommended for both interior and exterior walls. Specimen finish A trial area should be treated on-site for the architect s approval. Site Work Storage Can be stored in a dry shed off the floor on wooden slats for 4 months. Head Office 8 Telford Road, Industria PO Box 43236, Industria, 2042 Tel. (011) Fax (011) Suitable surfaces Drystack brickwork, breeze blocks, stock and face bricks, rough concrete, hard, clean bagwash, scratch plaster, previously painted surfaces, etc. To be used in conjunction with CemBond when applied to previously painted surfaces (see the CemBond data sheet). Surface preparation Surfaces should be clean, hard and dry at time of application. Weather Do not apply to exterior surfaces if rain is expected or if there is a risk of frost. Ideal temperature range is 5-30 o C. Mixing Mix to a paste 3 volumes CemWash with 1 volume water. Add 1 further volume water and mix to a creamy slurry. Apply all mixed material within 1 hour. Keep mixture stirred to ensure consistant texture. Masking For best results all windows, doors and adjacent surfaces should be masked using masking tape and brown paper. All masking material must be removed at the end of the day s work. Application Apply liberally using a whitewash block brush ensuring that all joints and holes in the masonry or concrete are filled. Do not use a cellulose filler, patch with CemWash and water mixed to a firm paste consistency. If a brushed effect is desired, finish with vertical upstrokes. Remember to keep a wet edge at all times and work from architectural feature to architectural feature to prevent unsightly joint marks. Do not come back to patch. It is advisable to use at least two applicators per wall, one above and one below, following closely behind to avoid dry joints. Allow at least 2 days between coats. Clean splashes and over-brushing at the end of each day. Curing Each coat to be cured by wetting with clean water 3 times during the day following the day of application. Coverage CemWash Primer: Approximately 12-15m2 / 25kg bag. CemWash Colour (onto Primer): Approximately 24-30m2 / 25kg bag. Packaging Supplied in 25kg non-returnable paper bags cemcrete info@cemcrete.co.za

3 CemWash Colour Chart albany clarence cinnamon golden brown wheat green grey hazelnut ivory white kalahari khaki light grey nutmeg sandstone Colours are a guide only. A sample should be applied on-site for final approval ochre peach slate

4 CemWash Mixing Instructions: for application onto flush-jointed brick- or block-work In a suitable container combine 3 volumes CemWash and 1 volume water. Mix to a paste. Add 1 further volume of water. Mix to a creamy slurry. Apply with a block brush CemWash Application: onto flush-jointed brick- or block-work Remove high spots by rubbing a brick over the surface in a circular motion. Remove all dust and loose material. Prepare a paste comprising 3 volumes of CemWash and 1 volume water. Fill large holes using this paste. Leave to dry for 1 day. Cure by wetting with water 3 times during the next day. Mix CemWash as per instructiions above. Apply the first coat of CemWash (Primer) using a block-brush. Leave to dry for 1 day. Cure by wetting with clean water 3 times during the next day. Apply the second coat of CemWash (Colour). Leave to dry for 1 day. Cure by wetting with clean water 3 times during the next day.

5 CemWash Application: onto previously painted surfaces. Brush surface to remove all loose material by brushing well. Wipe the surface using a damp sponge. Prime the surface using the mixing liquid as described in the Mixing Instructions Mix CemWash as per instructions. Apply the first coat of CemWash (Primer) using a block-brush. Leave to dry for 1 day. Cure by wetting with clean water 3 times during the next day. Leave to dry. Apply the second coat of CemWash (Colour). Leave to dry for 1 day. Cure by wetting with clean water 3 times during the next day. Leave to dry. The surface can be finished in a number of ways, including: Apply the second coat at a 90 o angle to thea first coat. This will produce a hessian a effect. Finish the second coat using a damp sponge to create desired texturae. Finish second coat using a damp sponge-roller to create desired texture. Important information Work from architectural feature to architectural feature keeping a wet edge. Do not patch. Start application on the part of the building that is in the shade. This prevents direct sunlight from drying out the product too fast. Exposed parapet walls should be properly waterproofed. It is preferable to have a capping or coping so that water runs past the wall, preventing streak-marks. Window sills should have drip lines cut underneath. Unless proper waterproofing has been done at foundation level, rising damp will occur. Ensure that the surface has even suction prior to application.

6 CemWash Mixing Instructions: for application onto scratch plaster or previously painted surfaces. Prepare a mixture consisting of 1 volume CemBond and 5 volumes water. This will be used as the mixing liquid. In a suitable container combine 3 volumes CemWash and 1 volume of the mixing liquid. Mix to a paste. Add 1 further volume of the mixing liquid. Mix to a creamy slurry. CemWash Application: onto scratch plaster Remove all dust and loose material by brushing well. Prime the surface using the mixing liquid prepared as above. Leave until the surface is tacky (usually about 10 minutes). Mix CemWash as per instructiions above. Apply the first coat of CemWash (Primer) using a block-brush. Leave to dry for 1 day. Cure by wetting with clean water 3 times during the next day. Leave to dry. Apply the second coat of CemWash. (Colour) Leave to dry for 1 day. Cure by wetting with clean water 3 times during the next day. Leave to dry.

Agrément Certificate 2003/297

Agrément Certificate 2003/297 Agrément Certificate 2003/297 Copyright Agrément South Africa, April 2003 The master copy of this document appears on the website: http://www.agrement.co.za Validity Users of any Agrément certificate should

More information

COLOUR HARDENER Dry-shake screed floor finish

COLOUR HARDENER Dry-shake screed floor finish COLOUR HARDENER Dry-shake screed floor finish A granolithic concrete material that is floated into fresh screed or concrete which colours, strengthens and creates durable surfaces for concrete floors.

More information

unique WALL PRODUCTS Creating distinctive cement finishes as you are. Wall Preparation Products, Trowel-on & Brush-on Wall Finishes & Sealers

unique WALL PRODUCTS Creating distinctive cement finishes as you are. Wall Preparation Products, Trowel-on & Brush-on Wall Finishes & Sealers WALL PRODUCTS Wall Preparation Products, Trowel-on & Brush-on Wall es & Sealers unique Creating distinctive cement finishes as as you are. R Manufacturers of Distinctive Decorative Coatings Wall Preparation

More information

Pool Plasters & Pool Paint

Pool Plasters & Pool Paint 72 Pool Plasters & Pool Paint Comprised of waterproof marble based plaster and cement-based paint, for the new and renovations markets in the pool industry, available in a range of colours. weber-tylon.co.za

More information

unique SPECIALISED BUILDING PRODUCTS Creating distinctive cement finishes as you are. A variety of products for building needs

unique SPECIALISED BUILDING PRODUCTS Creating distinctive cement finishes as you are. A variety of products for building needs SPECIALISED BUILDING PRODUCTS A variety of products for building needs unique Creating distinctive cement finishes as as you are. R Manufacturers of Distinctive Decorative Coatings EIFS BaseCoat EIFS BaseCoat

More information

PORTER S ORIGINAL LIME WASH

PORTER S ORIGINAL LIME WASH Product Specification Product Name: PORTER S ORIGINAL LIME WASH PRODUCT DESCRIPTION: ENVIRONMENTAL INFORMATION: is a unique lime based coating blended with natural pigments which is designed to create

More information

POOLCRETE White & coloured marble pool plaster

POOLCRETE White & coloured marble pool plaster POOLCRETE White & coloured marble pool plaster A 6mm thick smooth plaster, recommended for the interior plastering of walls and floors of swimming pools, which becomes a very hard integral part of the

More information

unique POOL PRODUCTS Creating distinctive cement finishes as you are. Finishes - PoolCrete, Pool Coating, BeadCrete & Pool Repair Products

unique POOL PRODUCTS Creating distinctive cement finishes as you are. Finishes - PoolCrete, Pool Coating, BeadCrete & Pool Repair Products POOL PRODUCTS es - PoolCrete, Pool Coating, BeadCrete & Pool Repair Products unique Creating distinctive cement finishes as as you are. R Manufacturers of Distinctive Decorative Coatings PoolCrete POOLCRETE

More information

Polymer bonding aid and mortar additive bonding agent for old and new concrete. Test method Typical result Control. Compressive strength (BS6319,Pt2)

Polymer bonding aid and mortar additive bonding agent for old and new concrete. Test method Typical result Control. Compressive strength (BS6319,Pt2) Techno Bond SBR Polymer bonding aid and mortar additive bonding agent for old and new concrete Uses For improving the physical properties of cementations mixes. Typical uses include, but are not limited

More information

unique WATERPROOFING PRODUCTS Creating distinctive cement finishes as you are. Products for waterproofing, treatment of damp & pond lining

unique WATERPROOFING PRODUCTS Creating distinctive cement finishes as you are. Products for waterproofing, treatment of damp & pond lining WATERPROOFING PRODUCTS Products for waterproofing, treatment of damp & pond lining unique Creating distinctive cement finishes as as you are. R Manufacturers of Distinctive Decorative Coatings MATCRETE

More information

Sheetseal 226 RIW. Sheetseal 226

Sheetseal 226 RIW. Sheetseal 226 CI/SfB Vs1 April 2009 CERTIFICATE No 92/2817 Sheetseal 226 is a cold applied, high density polyethylene film, coated with a bitumen/rubber self adhesive layer with a removable reinforced silicone paper.

More information

BONCOTE CEMENT PAINT. Product Specification. Product Name: ENVIRONMENTAL INFORMATION: PRODUCT DESCRIPTION: LOCATION:

BONCOTE CEMENT PAINT. Product Specification. Product Name: ENVIRONMENTAL INFORMATION: PRODUCT DESCRIPTION: LOCATION: Product Specification Product Name: BONCOTE CEMENT PAINT PRODUCT DESCRIPTION: ENVIRONMENTAL INFORMATION: Boncote Cement Paint is a Portland cement based product supplied in a powder form and coloured with

More information

ELASTOFLEX ELASTOMERIC TEXTURED ACRYLIC WALL COATING SPECIFICATION

ELASTOFLEX ELASTOMERIC TEXTURED ACRYLIC WALL COATING SPECIFICATION ELASTOFLEX ELASTOMERIC TEXTURED ACRYLIC WALL COATING SPECIFICATION PART 1 - GENERAL 1.01 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions,

More information

SILASEC DESCRIPTION FEATURES AND BENEFITS SURFACE PREPARATION

SILASEC DESCRIPTION FEATURES AND BENEFITS SURFACE PREPARATION SILASEC WP0001 REVISED: JANUARY 2002 DESCRIPTION Bondall Silasec is a concentrated liquid waterproofing compound designed to be used with Portland type A or type GP cements to form a permanent waterproof

More information

DATA SHEET DEKSTER 131 SELFLEVELLING FLOOR COAT / UNDERLAY

DATA SHEET DEKSTER 131 SELFLEVELLING FLOOR COAT / UNDERLAY (Page 1 of 8 ) GENERAL DESCRIPTION - Dekster 131 self levelling is a contemporary coating that achieves hard wearing, utilitarian floor surfaces in a range of natural tones to offset any style of interior.

More information

Building Construction 14. Dr Nabil El-Sawalhi Associate professor Engineering Projects Management

Building Construction 14. Dr Nabil El-Sawalhi Associate professor Engineering Projects Management Building Construction 14 Dr Nabil El-Sawalhi Associate professor Engineering Projects Management Plaster Plaster is a wet mixed material applied to internal walls as a finish to fill in any irregularities

More information

Finishes. The visual quality of your finished wall or ceiling is dependent on the quality of workmanship and quality of the materials used.

Finishes. The visual quality of your finished wall or ceiling is dependent on the quality of workmanship and quality of the materials used. Finishes The visual quality of your finished wall or ceiling is dependent on the quality of workmanship and quality of the materials used. Knauf lead the way in modern, highly developed finishing materials

More information

ASH GROVE KOLORSTONE BROOMCOAT MIXING KIT. Spec Sheets Contents: Kolorstone Broomcoat Mixing Spec Sheet Kolorflex Admixture Spec Sheet

ASH GROVE KOLORSTONE BROOMCOAT MIXING KIT. Spec Sheets Contents: Kolorstone Broomcoat Mixing Spec Sheet Kolorflex Admixture Spec Sheet ASH GROVE KOLORSTONE BROOMCOAT MIXING KIT Spec Sheets Contents: Kolorstone Broomcoat Mixing Spec Sheet Kolorflex Admixture Spec Sheet kolor stone broomcoat 1. Product Name ASH GROVE KOLOR STONE Broomcoat

More information

ARTEX AND PLASTER. 2 - Choosing the right product

ARTEX AND PLASTER. 2 - Choosing the right product ARTEX AND PLASTER Proper plastering is not easy. But DIY plasters are designed with ease of use in mind, and Artex TM is no more difficult to apply than thick paint. It is best to wear gloves when mixing

More information

DATE: 3 rd March 2015

DATE: 3 rd March 2015 DATE: 3 rd March 2015 PROJECT NAME: Magnesium Oxide Board- External specification PREPARED BY: Chris Suter 0414181066 csuter@ppg.com Armawall Armashield on Magnesium Oxide Board with Preprite Traditional

More information

SIDER-BASE CONCENTRATE AAC/ MONOSIDERAL AAC THE ULTIMATE OLD-WORLD AERATED CONCRETE-AAC DECORATIVE STUCCO SYSTEM

SIDER-BASE CONCENTRATE AAC/ MONOSIDERAL AAC THE ULTIMATE OLD-WORLD AERATED CONCRETE-AAC DECORATIVE STUCCO SYSTEM SIDER-CRETE, INC. 153 Regur Road Hawkinsville, GA 31036 USA Ph: 478.892.9800 www.sider-crete.com SIDER-BASE CONCENTRATE AAC/ MONOSIDERAL AAC THE ULTIMATE OLD-WORLD AERATED CONCRETE-AAC DECORATIVE STUCCO

More information

Finish for topped and smooth surfaces, with or without chips. Pore and cavity filler, joint filler, adhesive for tiles etc.

Finish for topped and smooth surfaces, with or without chips. Pore and cavity filler, joint filler, adhesive for tiles etc. Wecryl R 230 Accurate Details Complex details, penetrations or joints are the weak points of every Roof Waterproofing System. Upstands and edging on details can be waterproofed without seams or joints

More information

DuPont Flashing Systems Commercial Installation Guidelines

DuPont Flashing Systems Commercial Installation Guidelines DuPont DuPont Flashing Systems Commercial Installation Guidelines FOR DUPONT THRU-WALL FLASHING SHELF ANGLE Table of Contents Applicable Products... 2 Required Materials... 2 Optional Materials... 3 DuPont

More information

BACKSTOP NT - VB A high performance, non-cementitious water-resistive membrane and air/vapour barrier

BACKSTOP NT - VB A high performance, non-cementitious water-resistive membrane and air/vapour barrier A high performance, non-cementitious water-resistive membrane and air/vapour barrier Backstop NT - VB Application Instructions for use behind Dryvit EIFS A high performance, non-cementitious water-resistive

More information

MONOBASE AAC/ SIDER-PLAST THE ULTIMATE EXTERIOR HARD COAT STUCCO SYSTEM FOR AUTOCLAVED AERATED CONCRETE

MONOBASE AAC/ SIDER-PLAST THE ULTIMATE EXTERIOR HARD COAT STUCCO SYSTEM FOR AUTOCLAVED AERATED CONCRETE SIDER-CRETE, INC. 153 Regur Road Hawkinsville, GA 31036 USA Ph: 478.892.9800 www.sider-crete.com MONOBASE AAC/ SIDER-PLAST THE ULTIMATE EXTERIOR HARD COAT STUCCO SYSTEM FOR AUTOCLAVED AERATED CONCRETE

More information

Crystoflex Max comprising of a liquid component of selected polymers and a powder component of selected cements, fillers and aggregates.

Crystoflex Max comprising of a liquid component of selected polymers and a powder component of selected cements, fillers and aggregates. Product Data Sheet Crystoflex Max Two pack, flexible, cementitious waterproofing membrane for positive or negative water pressure. Description Crystoflex Max is a two pack, flexible, cementitious waterproof

More information

SATIN NON-DRIP ACRYLIC

SATIN NON-DRIP ACRYLIC PRODUCT DATA SHEET ISSUE DATE: FEBRUARY 2016 PRODUCT DESCRIPTION PRODUCT NAME PRODUCT DESCRIPTION SATIN NON-DRIP ACRYLIC A tough superior quality non-drip waterborne enamel with a satin sheen finish. A

More information

Installation Instructions Tuscan Field Applied Limestone Finish

Installation Instructions Tuscan Field Applied Limestone Finish Installation Instructions Tuscan Field Applied Limestone Finish TS-107 Recommended Tools for Installation of Tuscan StoneWorx Finishes Variable Speed Drill capable of producing 1000 RPM s MX1 Mixing Paddle

More information

Product Data Sheet. Description. Uses. Suitable Surfaces. Polymer enhanced, pre-blended, bag mix, coarse float render.

Product Data Sheet. Description. Uses. Suitable Surfaces. Polymer enhanced, pre-blended, bag mix, coarse float render. Product Data Sheet Render MaxiCoarse Polymer enhanced, pre-blended, bag mix, coarse float render. Description MaxiCoarse Render is a pre-blended, polymer fortified cement based render mix, formulated to

More information

RD COATINGS -RD-ELASTOFLEX ELASTOMERIC ACRYLIC WALL COATING SPECIFICATION

RD COATINGS -RD-ELASTOFLEX ELASTOMERIC ACRYLIC WALL COATING SPECIFICATION RD COATINGS -RD-ELASTOFLEX ELASTOMERIC ACRYLIC WALL COATING SPECIFICATION PART 1 - GENERAL 1.01 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions,

More information

SUPER multi purpose structural adhesive. Polymer admixture for cement systems

SUPER multi purpose structural adhesive. Polymer admixture for cement systems SUPER multi purpose structural adhesive. Polymer admixture for cement systems DESCRIPTION A polymer admixture based upon Styrene Butadiene Co-polymer for use in concrete, renders, screeds, pointing and

More information

GRANOMIN TOPCOAT SYSTEM USING ACRYLIC PRIMER AND NANOSIL SELF CLEANING EQUALISING PAINT FINISH

GRANOMIN TOPCOAT SYSTEM USING ACRYLIC PRIMER AND NANOSIL SELF CLEANING EQUALISING PAINT FINISH SPS ENVIROWALL LIMITED NBS SPECIFICATION: RENDER ONLY SYSTEM USING C&G BASECOAT WITH REINFORCEMENT MESH WITH A GRANOMIN TEXTURED FINISH USING AN ACRYLIC PRIMER AND NANOSIL OVERPAINT FINISH APPLIED TO A

More information

YEARS WATER PROOFING AND PERFORMANCE WARRANTY*

YEARS WATER PROOFING AND PERFORMANCE WARRANTY* 502, 5th Floor, Boston House, Suren Road, Behind Cinemax Theatre, Chakala, Andheri (E), Mumbai - 400 093 Office: +91 226787 2100 Fax: +91 22 26848920 www.jotun.in 10 YEARS WATER PROOFING AND PERFORMANCE

More information

PRODUCT DATA. synthetic plaster finish. Elegant old world charm with the added strength and durability of today s superior product chemistry.

PRODUCT DATA. synthetic plaster finish. Elegant old world charm with the added strength and durability of today s superior product chemistry. PLASTONE synthetic plaster finish exterior interior Elegant old world charm with the added strength and durability of today s superior product chemistry. Plastone can be used to produce a variety of textures

More information

2002 Advanced Building Products, Inc., P.O. Box 98, Springvale, Maine TEL: ; FAX: ; WEBSITE:

2002 Advanced Building Products, Inc., P.O. Box 98, Springvale, Maine TEL: ; FAX: ; WEBSITE: SECTION 07651 FLEXIBLE COPPER SHEET FLASHINGS Advanced Building Products, Inc. manufacturer many types of flexible copper sheet flashings. Due to their ductility, high tensile strength, and resistance

More information

Installation Instructions. Important. Recommended Tools. Palladium Rigid Sheet/Rubrail or Palladium G2 Sheet/Rubrail. Storage

Installation Instructions. Important. Recommended Tools. Palladium Rigid Sheet/Rubrail or Palladium G2 Sheet/Rubrail. Storage Important Storage Flat sheet - Store Palladium Rigid Sheet in a clean, dry, interior area at temperatures between 50 F and 95 F [10-35 C]. Keep out of direct sunlight. Make sure sheet is well supported.

More information

WPM WATERPROOFING MEMBRANE

WPM WATERPROOFING MEMBRANE WPM 300 - WATERPROOFING MEMBRANE Description WPM 300 Waterproofing Membrane is a single-pack, water based polyurethane modified synthetic rubber polymer, liquid membrane developed specifically as a tough,

More information

Asphalt Maintenance PRODUCTS INFORMATION AND INSTALLATION GUIDE

Asphalt Maintenance PRODUCTS INFORMATION AND INSTALLATION GUIDE Asphalt Maintenance PRODUCTS INFORMATION AND INSTALLATION GUIDE TABLE OF CONTENT About RESISTO 2 Asphalt Cleaner and Degreaser 3 Oil Spot Primer 3 Liquid Crack Filler 4 Rubberized Crack Filler 4 Levelling

More information

EUROPLAST. Color 20 standard colors, see color chart for specifics. Special colors available upon request, virtually no limit to selection of shades.

EUROPLAST. Color 20 standard colors, see color chart for specifics. Special colors available upon request, virtually no limit to selection of shades. EUROPLAST By Stuc-O-Flex International, Inc. Description Europlast is a pre-colored, wet-mix polymer based interior & exterior coating system that transforms vertical walls into a classic example of old

More information

Sheetseal GR RIW. Sheetseal GR

Sheetseal GR RIW. Sheetseal GR CI/SfB Ln2 April 2009 Sheetseal GR is a cold applied, high density polyethylene film bonded to aluminium foil and coated with a bitumen / rubber self adhesive layer with a removable reinforced silicone

More information

Neoproof Polyurea R. Technical Characteristics. Description of the product. Applications

Neoproof Polyurea R. Technical Characteristics. Description of the product. Applications Description of the product Applications Neoproof Polyurea R is a highly durable, 2 component brushable polyurea, waterproofing coating for roofs, when mechanical durability and outstanding waterproofing

More information

unique FLOOR PRODUCTS Creating distinctive cement finishes as you are. Floor Preparation Products, Floor Finishes, Sealers & Floor Maintenance

unique FLOOR PRODUCTS Creating distinctive cement finishes as you are. Floor Preparation Products, Floor Finishes, Sealers & Floor Maintenance FLOOR PRODUCTS Floor Preparation Products, Floor es, Sealers & Floor Maintenance unique Creating distinctive cement finishes as as you are. R Manufacturers of Distinctive Decorative Coatings Floor Preparation

More information

Caparol System PRO Data sheet

Caparol System PRO Data sheet System features Expanded polystyrene insulation Cost effective solution Excellent detailing options Proven technology Wide variety of colours Reliable protection and crack resistance Proven track record

More information

unique FLOOR PRODUCTS Creating distinctive cement finishes as you are. Floor Preparation Products, Floor Finishes, Sealers & Floor Maintenance

unique FLOOR PRODUCTS Creating distinctive cement finishes as you are. Floor Preparation Products, Floor Finishes, Sealers & Floor Maintenance FLOOR PRODUCTS Floor Preparation Products, Floor es, Sealers & Floor Maintenance unique Creating distinctive cement finishes as as you are. R Manufacturers of Distinctive Decorative Coatings Floor Preparation

More information

For system application details, refer to the corresponding Baumit Method Statement before submitting a tender.

For system application details, refer to the corresponding Baumit Method Statement before submitting a tender. SPECIFICATION OF MATERIALS EXTERNAL WALL INSULATION SYSTEM (Adhesively Fixed). For system application details, refer to the corresponding Baumit Method Statement before submitting a tender. Baumit Ltd

More information

REV: DeckProof Flooring System Concrete Specification. Concrete Specification

REV: DeckProof Flooring System Concrete Specification. Concrete Specification REV:28.01.13 Please note all DeckProof materials cure within 20 minutes so only mix material for an area that can be covered within this time. Please consult the mixing section of this specification before

More information

KEIM Render Systems. Think Render, Think Keim Keim Render Systems The Mineral Solution

KEIM Render Systems. Think Render, Think Keim Keim Render Systems The Mineral Solution KEIM Render Systems Think Render, Think Keim Keim Render Systems The Mineral Solution Keim Universal Render Keim Universal Render is a renovation and thin layer wall render, based on mineral and silicate

More information

Neoproof Polyurea R. Technical Characteristics. Description of the product. Applications

Neoproof Polyurea R. Technical Characteristics. Description of the product. Applications Description of the product Applications Neoproof Polyurea R is a highly durable, 2 component brushable polyurea, waterproofing coating for roofs, when mechanical durability and outstanding waterproofing

More information

Manufacturers of Distinctive Decorative Coatings

Manufacturers of Distinctive Decorative Coatings Manufacturers of Distinctive Decorative Coatings R FLOOR PRODUCTS Floor Preparation Products, Floor es, Sealers & Floor Maintenance unique Creating distinctive cement finishes as as you are. R Manufacturers

More information

E.MIX MOISTURE SEALER

E.MIX MOISTURE SEALER E.MIX Super Fast Fix Fast setting, high performance, high strength, highly flexible, strong polymerized thin bed tile adhesive for interior and exterior wall tile fixing complied with C2FTE class of EN

More information

SSS003: Substrate Specification Sheet 3 - Brick, Block and Concrete

SSS003: Substrate Specification Sheet 3 - Brick, Block and Concrete SSS003: Substrate Specification Sheet 3 - Brick, Block and Concrete Page 1 of 6 Document: 70.5 Collection: 116: Substrate Specification Sheets (SSS) Modified: 3/01/017 14:56 Created: 7/05/016 17:0 Armourcoat

More information

LUXAPOOL CHLORINATED RUBBER POOL COATING

LUXAPOOL CHLORINATED RUBBER POOL COATING Page 1 LUXAPOOL CHLORINATED RUBBER POOL COATING POOLS PREVIOUSLY PAINTED WITH CHLORINATED RUBBER SURFACE PREPARATION 1. Using a stiff brush or broom, scrub the entire surface with diluted LUXAPOOL Concentrated

More information

SS909 StoProtect - Architectural Blocks 1

SS909 StoProtect - Architectural Blocks 1 SS909 StoProtect - Architectural Blocks 1 Stoanz Ltd Authorized partner of Sto AG STOPROTECT CLEAR COATING SPECIFICATION OVER EXTERIOR ARCHITECTUAL CONCRETE BLOCK CONSTRUCTION Complies with CCANZ CP 01:

More information

SECTION BRICKWORK PART I GENERAL

SECTION BRICKWORK PART I GENERAL SECTION 04210 BRICKWORK PART I GENERAL 101 Scope General: supply and build the brickwork shown on the drawings or needed to complete the brickwork, including but not limited to the following: Provide all

More information

Limitations and Conditions

Limitations and Conditions RESENE CONSTRUCTION S MASONRY RENDER s Technical Assessments of products for building and construction. Rockcote Resene Ltd T/A Resene Construction Systems PO Box 39108 Harewood Christchurch Tel: 03 338

More information

Waterproofing and Damp-proofing Cementitious Slurry

Waterproofing and Damp-proofing Cementitious Slurry Product Data Sheet Edition: 01/10/2012 Identification no. Version no: GCC SikaTop Seal-107 SikaTop Seal-107 Waterproofing and Damp-proofing Cementitious Slurry Product Description Uses SikaTop Seal-107

More information

Getting the best from Wienerberger Bricks A Guidance Note on Garden & Retaining Walls

Getting the best from Wienerberger Bricks A Guidance Note on Garden & Retaining Walls Getting the best from Wienerberger Bricks A Guidance Note on Garden & Retaining Walls Introduction Correct construction and detailing of freestanding garden and retaining walls is important to ensure long

More information

APPLICATION The Wall areas to be rendered may require a fungicidal wash Ref. ESPS-ALGICID prior to any render applications.

APPLICATION The Wall areas to be rendered may require a fungicidal wash Ref. ESPS-ALGICID prior to any render applications. SPS ENVIROWALL LIMITED NBS SPECIFICATION: RENDER ONLY SYSTEM USING RETROBASE BASECOAT WITH REINFORCEMENT MESH USING SILICONE TOPCOAT APPLIED TO EXISTING MASONRY SUBSTRATE M20 EXTERNAL RENDER SYSTEM To

More information

WATERPROOFING OF AN ACCESSIBLE FLAT ROOF WITH A POLYURETHANE LIQUID MEMBRANE AND TILING

WATERPROOFING OF AN ACCESSIBLE FLAT ROOF WITH A POLYURETHANE LIQUID MEMBRANE AND TILING WATERPROOFING OF AN ACCESSIBLE FLAT ROOF WITH A POLYURETHANE LIQUID MEMBRANE AND TILING WATERPROOFING OF AN ACCESSIBLE FLAT ROOF WITH A POLYURETHANE LIQUID MEMBRANE AND TILING 4 5 6 7 3 2 1 1. CONCRETE

More information

PART A: JOB PROCDRE FOR PLASTERING

PART A: JOB PROCDRE FOR PLASTERING PART A: JOB PROCDRE FOR PLASTERING 1. SCOPE: The scope of this procedure shall apply to all cement plaster finishes to column, ceilings, walls and similar surfaces on backgrounds met with such as brick,

More information

Sealing slurry system component of the KÖSTER KD System. approx. 15 min. approx. 20 sec. 2-3 hours. up to 7 bar (negative side)

Sealing slurry system component of the KÖSTER KD System. approx. 15 min. approx. 20 sec. 2-3 hours. up to 7 bar (negative side) Technical Data Sheet W 211 Issued: 2015-05-05 Sealing slurry system component of the Features The environmentally friendly stops active water ingress and safely seals off pressurized water from the negative

More information

K REND EXTERNAL RENDERS K REND COM REND

K REND EXTERNAL RENDERS K REND COM REND Kilwaughter Chemical Co. Ltd 9 Starbog Road Larne Co. Antrim BT40 2TJ Tel: 028 2826 0766 Fax: 028 2826 0136 e-mail: Sales@K-Rend.co.uk website: www.k-rend.co.uk APPROVAL INSPECTION TESTING CERTIFICATION

More information

Concrete Wall & Floor Finishes

Concrete Wall & Floor Finishes TM Concrete Wall & Floor Finishes Interior & Exterior Concrete Wall Finishes / Interior Concrete Floor Finishes ENVIRONMENTALLY Exposed decorative concrete wall and floor finishes Content Introduction

More information

OMNITEK Deco is suitable for all leveling and thin layer concrete repair applications, such as:

OMNITEK Deco is suitable for all leveling and thin layer concrete repair applications, such as: OMNITEK Deco High strength leveling mortar, Class R4 Product Description OMNITEK Deco is a high strength, cement based, volume stable mortar, suitable for leveling and finishing of concrete surfaces in

More information

REV: DeckProof Flooring System Timber Specification. Timber Specification

REV: DeckProof Flooring System Timber Specification. Timber Specification REV:28.1.13 DeckProof Flooring System Please note all DeckProof materials cure within 20 minutes so only mix material for an area that can be covered within this time. Please consult the mixing section

More information

RIW SHEETSEAL GR BENEFITS APPLICATIONS APPLIED TO

RIW SHEETSEAL GR BENEFITS APPLICATIONS APPLIED TO CI/SfB TN6 LI4143 August 2017 RIW SHEETSEAL GR is a cold applied, high density polyethylene film bonded to aluminium foil and coated with a bitumen/rubber self adhesive layer with a removable reinforced

More information

F10. BRICK/BLOCK WALLING To be read with Preliminaries/General conditions. TYPES(S) OF WALLING 110 CLAY FACING BRICKWORK SHALL BE:

F10. BRICK/BLOCK WALLING To be read with Preliminaries/General conditions. TYPES(S) OF WALLING 110 CLAY FACING BRICKWORK SHALL BE: F10 BRICK/BLOCK WALLING To be read with Preliminaries/General conditions. TYPES(S) OF WALLING 110 CLAY FACING BRICKWORK SHALL BE: Product Name: Olde English Grey Size: 215x102x65mm Manufacturer and reference:

More information

For system application details, refer to the corresponding Baumit Method Statement before submitting a tender.

For system application details, refer to the corresponding Baumit Method Statement before submitting a tender. SPECIFICATION OF MATERIALS EXTERNAL WALL INSULATION SYSTEM (Adhesively Fixed). For system application details, refer to the corresponding Baumit Method Statement before submitting a tender. Baumit Ltd

More information

PERM-FLEX ASSEMBLY DIRECT APPLICATION TO CEMENTITIOUS SUBSTRATES MANUFACTURERS SPECIFICATION / SECTION 09960

PERM-FLEX ASSEMBLY DIRECT APPLICATION TO CEMENTITIOUS SUBSTRATES MANUFACTURERS SPECIFICATION / SECTION 09960 STUC-O-FLEX PERM-FLEX ASSEMBLY DIRECT APPLICATION TO CEMENTITIOUS SUBSTRATES MANUFACTURERS SPECIFICATION / SECTION 09960 PART 1 - GENERAL 1.01 DESCRIPTION Provide all labor, materials and equipment necessary

More information

What is Dulux Professional DryErase?

What is Dulux Professional DryErase? What is Dulux Professional DryErase? Dulux Professional DryErase is an innovative coating that is transforming the way people work and learn by turning a painted surface into an erasable canvas to collaborate,

More information

K REND EXTERNAL RENDERS K REND SILICONE WP AND SILICONE FT

K REND EXTERNAL RENDERS K REND SILICONE WP AND SILICONE FT Kilwaughter Chemical Co. Ltd 9 Starbog Road Larne Co. Antrim BT40 2TJ Tel: 028 2826 0766 Fax: 028 2826 0136 e-mail: Sales@K-Rend.co.uk website: www.k-rend.co.uk APPROVAL INSPECTION TESTING CERTIFICATION

More information

Product Specification

Product Specification Product Specification Product Name: PORTER S MINERAL SILICATE STAIN PRODUCT DESCRIPTION: is a highly durable coloured silicate dispersion stain for the decoration and protection of old and new fair-faced

More information

PlastaBrick 1/ 2/ 3/ 4/ 5/ 6/ Masonry Brick & Block - Plaster System SYSTEM PROCESS

PlastaBrick 1/ 2/ 3/ 4/ 5/ 6/ Masonry Brick & Block - Plaster System SYSTEM PROCESS PlastaBrick Masonry Brick & Block - Plaster System PlastaBrick is a masonry render system for smoothing and texturing brick or block walls. The system provides a hard durable surface which when painted

More information

External solid plastering: overview

External solid plastering: overview External solid plastering: overview Render gives a weatherproof surface that protects the building and provides a decorative finish. Traditional render is applied by hand; modern render can also be applied

More information

Neoproof Polyurea L. Technical Characteristics. Description of the product. Applications

Neoproof Polyurea L. Technical Characteristics. Description of the product. Applications Description of the product Applications Neoproof Polyurea L is a 2-component, pure aliphatic, brushable polyurea waterproofing coating for roofs, when mechanical durability and outstanding waterproofing

More information

SIKALASTIC-152 EXTERIOR WATERPROOFING MEMBRANE. Product. Scope. Appraisal No. 811 [2013] Appraisal No. 811 (2013) Amended 28 August 2017

SIKALASTIC-152 EXTERIOR WATERPROOFING MEMBRANE. Product. Scope. Appraisal No. 811 [2013] Appraisal No. 811 (2013) Amended 28 August 2017 SIKALASTIC-152 EXTERIOR WATERPROOFING MEMBRANE Amended 28 August 2017 BRANZ Appraisals Technical Assessments of products for building and construction. Sika (NZ) Ltd PO Box 19 192 Avondale Auckland 1746

More information

Render Systems MADE IN ITALY

Render Systems MADE IN ITALY Render Systems MADE IN ITALY Render Systems Why Render? Although in the UK we have a Traditional Lime based render market in recent years applying modern thin coat render systems is considered quite a

More information

TECHNICAL DATA SHEET

TECHNICAL DATA SHEET Dy-Mark EPOXY COAT DIRECTIONS FOR USE Dy-Mark All-In-One Epoxy Coat is a durable floor coating that gives a professional finish to interior bare concrete floors. Epoxy Coat resists hot tyre pick-up and

More information

Technical Data Sheet

Technical Data Sheet Permanent coating, which facilitates removal of graffiti. Agent description: KTX 07 is a unique, single component, colorlessly drying agent based on synthetic organosilicon polymers, applicable for surface

More information

AquaFlash System Installation Guide DS196

AquaFlash System Installation Guide DS196 AquaFlash System Installation Guide I. General: A. This document provides guidelines for the application and use of the Dryvit AquaFlash System at rough openings for windows, doors and other penetrations,

More information

BACKSTOP NT - Texture A high performance, non-cementitious water-resistive membrane and air barrier. Backstop NT - Texture Application Instructions

BACKSTOP NT - Texture A high performance, non-cementitious water-resistive membrane and air barrier. Backstop NT - Texture Application Instructions BACKSTOP NT - Texture A high performance, non-cementitious water-resistive membrane and air barrier Backstop NT - Texture Application Instructions CHECKLIST PRIOR TO THE INSTALLATION OF BACKSTOP NT TEXTURE

More information

SECTION BRICKWORK

SECTION BRICKWORK SECTION 04210 BRICKWORK THERE ARE NOTES AND CLAUSES IN THE SUSTAINABILITY GUIDE ON THIS TRADE. THIS TRADE SECTION DEPENDS ON COORDINATION BETWEEN THIS SPECIFICATION AND THE FINISHES SCHEDULE AS WELL AS

More information

SECTION Arisfor WallGuard

SECTION Arisfor WallGuard 1.1 GENERAL A. is a three component polymerized cementitious protective coating that can be applied to a variety of vertical interior and exterior substrates including: stucco, exterior gypsum sheathing,

More information

Planitop Range Smooth

Planitop Range Smooth Planitop Range Smooth any surface Planitop Range There is a vast array of substrates employed in the building industry, such as fresh and cured traditional or pre-blended render, concrete, plastic coatings

More information

MDC MicroTex Eggshell Micro-Textured Ceramic Coating for Walls

MDC MicroTex Eggshell Micro-Textured Ceramic Coating for Walls MicroTex Eggshell Micro-Textured Ceramic Coating for Walls Specification Guide 95: 9770 Special Wall Finishes 88: 9800 Special Coatings Part 1 General 1.01 SUMMARY A. This section specifies the furnishing

More information

Shower Waterproofing Membrane Under tile and wet area waterproofing membrane.

Shower Waterproofing Membrane Under tile and wet area waterproofing membrane. Product Information Technical Data Sheet - December 2017 Shower Waterproofing Membrane Under tile and wet area waterproofing membrane. DESCRIPTION Crommelin Shower Waterproofing Membrane is a waterbased,

More information

Cempolatex 1 Pack A CEMENT BASED LATEX SUB-FLOOR SMOOTHING COMPOUND

Cempolatex 1 Pack A CEMENT BASED LATEX SUB-FLOOR SMOOTHING COMPOUND Cempolatex 1 Pack A CEMENT BASED LATEX SUB-FLOOR SMOOTHING COMPOUND Date: 12 January 2016 Fact Sheet No.: TDS00179 YOUR SMART ADVANTAGES Flexible and rapid setting Suitable for use with underfloor heating

More information

F10. BRICK/BLOCK WALLING To be read with Preliminaries/General conditions. TYPES(S) OF WALLING 110 CLAY FACING BRICKWORK SHALL BE:

F10. BRICK/BLOCK WALLING To be read with Preliminaries/General conditions. TYPES(S) OF WALLING 110 CLAY FACING BRICKWORK SHALL BE: F10 BRICK/BLOCK WALLING To be read with Preliminaries/General conditions. TYPES(S) OF WALLING 110 CLAY FACING BRICKWORK SHALL BE: Product Name: Pre War Common Size: 215x102x65mm Manufacturer and reference:

More information

APPLICATION The wall areas to be rendered may require a fungicidal wash Ref. ESPS-ALGICID prior to any render applications.

APPLICATION The wall areas to be rendered may require a fungicidal wash Ref. ESPS-ALGICID prior to any render applications. SPS ENVIROWALL LIMITED NBS SPECIFICATION: RENDER ONLY SYSTEM USING A SURFACE SCRABBLER, SUBSTRATE PRIMER, A C&G BASECOAT WITH REINFORCING MESH AND A SILICONE TOPCOAT APPLIED TO AN EXISTING NON POROUS SUBSTRATE

More information

MANUFACTURER S (SHORT FORM) SPECIFICATION / SECTION

MANUFACTURER S (SHORT FORM) SPECIFICATION / SECTION STUC-O-FLEX - ELASTOMERIC ACRYLIC FINISH APPLICATION TO PORTLAND CEMENT PLASTER / CONCRETE RENDER MANUFACTURER S (SHORT FORM) SPECIFICATION / SECTION 09220-09 24 00 PART 1-GENERAL SCOPE: Manufacturer's

More information

MANUFACTURERS (SHORT FORM) SPECIFICATION / SECTION

MANUFACTURERS (SHORT FORM) SPECIFICATION / SECTION STUC-O-FLEX - ELASTOMERIC ACRYLIC FINISH APPLICATION TO PORTLAND CEMENT PLASTER / CONCRETE RENDER MANUFACTURERS (SHORT FORM) SPECIFICATION / SECTION 09220-09 24 00 PART 1-GENERAL SCOPE: Manufacturer's

More information

Product Data Sheet Waterproofing Membrane for Ponds and Water Features Description Uses Suitable Surfaces Additional Uses Specification

Product Data Sheet Waterproofing Membrane for Ponds and Water Features Description Uses Suitable Surfaces Additional Uses Specification Product Data Sheet Pondseal Waterproofing Membrane for Ponds and Water Features Description Pondseal is a polyurethane / acrylic co-polymer, water based coating which when fully cured, forms an impervious,

More information

TT Vapour Membrane Data Pack

TT Vapour Membrane Data Pack Triton Systems TT Vapour Membrane Data Pack BS8102: 2009 "Code of Practice for the protection of below ground structures from water from the ground" Triton Contact Details: Triton Chemical Manufacturing

More information

PRODUCT SELECTION GUIDE

PRODUCT SELECTION GUIDE PRODUCT SELECTION GUIDE Floor Sealers MasterTop 333 MasterKure 402 MasterKure 404 MasterTop 1116 Mastertop TC 406 Mastertop TC 450 Mastertop TC 471 Mastertop TC 495 Single Pack Two-pack Epoxy Polyurethane

More information

OLD BRICK ORIGINALS KILN-FIRED THIN BRICK VENEER Installation Guide. RobinsonBrick.com

OLD BRICK ORIGINALS KILN-FIRED THIN BRICK VENEER Installation Guide. RobinsonBrick.com OLD BRICK ORIGINALS KILN-FIRED THIN BRICK VENEER Installation Guide RobinsonBrick.com OLD BRICK ORIGINALS THIN BRICK VENEER Page 2 INTRODUCTION Check local building codes for proper installation guidelines

More information

MLC MASONRY AND BRICK PLASTER SYSTEM. Product. Scope. Appraisal No. 839 [2013] Appraisal No. 839 (2013) BRANZ Appraisals

MLC MASONRY AND BRICK PLASTER SYSTEM. Product. Scope. Appraisal No. 839 [2013] Appraisal No. 839 (2013) BRANZ Appraisals MLC MASONRY AND BRICK PLASTER SYSTEM BRANZ Appraisals Technical Assessments of products for building and construction. Specialized Construction Products Ltd PO Box 101 127 North Shore Mail Centre Auckland

More information

FEATURES AND BENEFITS

FEATURES AND BENEFITS Product Information Technical Data Sheet - August 2017 DiamondCoat Full colour coating system to rejuvenate concrete, paving and masonry. DESCRIPTION Crommelin DiamondCoat is designed to recolour, rejuvenate,

More information

BACKSTOP TM NT - Texture A high performance, water-resistive membrane and air barrier

BACKSTOP TM NT - Texture A high performance, water-resistive membrane and air barrier BACKSTOP TM NT - Texture A high performance, water-resistive membrane and air barrier Backstop NT - Texture Specifications DRYVIT SYSTEMS CANADA MANUFACTURER S SPECIFICATION SECTION 07240 BACKSTOP NT -

More information