Call For Your Local Distributor of Nu-Poly Mezzanine Decking
|
|
- Marlene Underwood
- 6 years ago
- Views:
Transcription
1 1 of 5 9/24/ :21 PM Call For Your Local Distributor of Nu-Poly Mezzanine Decking To successfully meet today's demands while responding to industry challenges of the future, Nu-Poly Panels offer performance-plus features to provide you with maximum strength, durability, and longevity. Nu-Poly Panels are ideal for mezzanine decking. Our state-of-the-art panels combine innovative engineering with cost efficiency, to provide you with a product superior to traditional decking materials. Nu-Poly Mezzanine panel features a fully factory Integrated panel construction, with in-house sheet extrusion, laminating and panel machining in one factory. Used in both retrofit and new construction, Nu-Poly Panels far surpass the strength and durability of other commonly used decking materials at a lower and more competitive cost.
2 2 of 5 9/24/ :21 PM Nu-Poly Panels cost less than steel, and are more durable than conventional wood mezzanines. Nu-Poly Panels are Factory laminated using a exterior panel adhesive for a superior bond. Constructed of textured, High Density Polyethylene sheet bonded to a structural substrate, typically of plywood. Other textures and substrates are available. What do Nu-Poly Panels do? Nu-Poly Panels provide a maintenance free durable nonslip surface that resists wear and abrasion. Characteristics of our panel help eliminate or minimize damage or failure of standard mezzanine floors caused by abusive conditions. Nu-Poly Panels for heavy traffic applications! The polythene laminate provides superior wearing characteristics in situations where wheeled traffic or other abrasive conditions are present. Weight-bearing wheels generate an incredible amount of abrasion and shear forces that are directly applied into the flooring surface. Even a moderate amount of weight on a small wheel can translate into a large amount of weight when converted into psi (pounds per square inch). Bare wood fiber, as in the case of standard plywood decking, will not withstand either the abrasion or the concentrated weight of even a moderately loaded wheel for extended periods of time. The heavier the load in psi, the shorter the life span of unprotected wood fiber. The polyethylene laminate is extremely resistant to abrasion and increased poly thickness can spread heavy wheel loads over larger areas; thus protecting the wood fiber, resulting in extended product life. Extensive testing and on the job experience of Nu-Poly Panels have proven their durability. Even if scratched or gouged, because the color of the poly is pigmented throughout the laminate the appearance is maintained. Nu-Poly Panels polyethylene laminate is a 100% moisture barrier and is resistant to most chemicals. Product Presentation Nu-Poly Panels are a High Density Polyethylene (HDPE) overlay factory laminated to various substrates on one or both sides. Nu-Poly Panels install directly to floor joists, steel roof decking or structural steel
3 3 of 5 9/24/ :21 PM beams. They can also be installed over existing floors. Overlay HDPE has excellent wearing capabilities for floors or decking in either an interior or exterior environment and the textured HDPE provides a low-skid surface. High Density Polyethylene (HDPE) is an extremely durable overlay that is chemical, moisture and fungus resistant. Our most common mezzanine textures are Moroccan and Quadripple 1. HDPE is available in various textures and thicknesses -.030",.050",.100" and.200". Standard colors - Grey or Beige. Other colors and compounds are available upon request. A 0.020" HDPE smooth white overlay is available for application to the backside for light reflectivity. Smooth or textured aluminum factory backers available upon request Substrates American Plywood Association (APA) rated plywood and Oriented Strand Board (OSB-wafer board) available. Fire-rated plywood and High Density Particle board also available. Other substrates are available upon request. Tongue & groove or precision square edge machining is available on two or four edges for easy installation. Sizes and thicknesses Nu-Poly Panels are available 4'x8' standard and other sizes by request. Nu-Poly Panels substrate thickness: 1/4" thru 3". Technical Support Physical and Engineering Properties of HDPE (High Density Polyethylene) ASTM number Value/units Hardness, Rockwell R D Flame spread E Class 3/C Smoke density E Class 3/C Ignition temperature D F Oxygen index D Abrasion resistance D mg/1000 IZOD impact D ft-lbs/in
4 4 of 5 9/24/ :21 PM Flexural stiffness D ,000 psi Torsional stiffness D ,000 psi 1 % Secant modulus D ,700 psi Elongation D % Tensile strength D psi Melt index D g/10 min Density D min 9/cc Low temp. Brittleness D-746 L-76 C * These are typical values and are not to be construed as specific product limits. Moroccan Quadripple Recommended HDPE thickness for specifications required (Wheel Loads)
5 5 of 5 9/24/ :21 PM Pedestrian traffic Light cart traffic to 200# per wheel* Heavy cart and pallet jacks to 1000# per wheel** Thicker laminates available for heavier applications * - based upon a (wide) x 7 (diameter) hard plastic wheel - footprint = 0.57 square inches ** - based upon a 3.5 (wide) x 2.75 (diameter) steel pallet jack roller - footprint = 0.64 square inches 1 Note: Quadripple Available in.050 minimum thickness Note: your actual weight per wheel loading must be adjusted to compensate for the actual footprint of the wheels to be used. * Notice: Panels and components made of fiberglass (FRP), wood, vinyl or aluminum, HDPE may be combustible and accordingly, should be used in compliance with local building codes and insurance regulations. * Physical and Engineering Properties of HDPE (High Density Polyethylene) Due to the nature of the component parts used in the fabrication of these panels, moderate bowing of the finished product and slight color variations may be experienced. * Nonwarranty: The information contained in this literature is presented in good faith and is believed to be accurate, but without guarantee. Conditions of use are beyond our control and all risks are assumed by the user. Nothing herein is a recommendation for uses which infringe valid patents or as extending a license under valid patents. Call For Your Local Distributor of Nu-Poly Mezzanine Decking Check out our Fasteners for easy installation
FiberLite FRP. Technical Data. Class C - Pages 1-2 Class A - Pages 3-4
FiberLite FRP Technical Data Class C - Pages 1-2 Class A - Pages 3-4 Technical Data NUDO FiberLite FRP 3004N.C Rev. 11 8/13 NUDO FiberLite FRP Class C Embossed and Smooth Wall & Ceiling Panels NUDO FiberLite
More informationHigh-performance structural cement-bonded particle board (CBPB)
High-performance structural cement-bonded particle board (CBPB) for floors, roofs and walls fire resistant moisture resistant durable exceptional strength exceptional value THE PRODUCT Versaroc is a high-performance
More informationNudo Guide Specification 03/01/2016 FiberScore FRP Wall Panels SECTION FIBERSCORE FIBERGLASS REINFORCED WALL PANELS
SECTION 09 7720 FIBERSCORE FIBERGLASS REINFORCED WALL PANELS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: Prefinished polyester glass reinforced plastic sheets and adhered to unfinished [gypsum] [cementitous]
More informationVERSAROC CEMENT BONDED PARTICLE BOARD SUBFLOORING VERSAROC CEMENT BONDED PARTICLE BOARD SUBFLOORING
PRODUCT SUBMITTAL SHEET CEMENT BONDED PARTICLE BOARD SUBFLOORING A cement bonded particle board subfloor that can be combined with other fire resistant materials to create 1 and 2 hour fire-rated floor/ceiling
More informationGENERAL SPECIFICATION FOR FIRE RATED APPLICATIONS
I N SULROCK FIRE RATED METAL PANELS GENERAL SPECIFICATION FOR FIRE RATED APPLICATIONS 1. GENERAL 1.1. Summary Fire-rated panels as shown on the drawings shall be INSULROCK brand panels as supplied by Green
More informationSECTION 16 FIBERGLASS FLOORING AND DECKING SYSTEMS
SECTION 16 FIBERGLASS FLOORING AND DECKING SYSTEMS SAFPLANK FIBERGLASS PLANK SYSTEM SAFPLANK HD HEAVY DUTY DECKING SYSTEM SAFDECK FIBERGLASS DECKING SYSTEM STRONGDEK FIBERGLASS DECKING SYSTEM Look for
More informationRev. 08 9/15 Please Read Disclaimers:
NuPoly panels Guidelines 6006.NP Rev. 08 9/15 Please Read Disclaimers: PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION!! These guidelines are provided in good faith to help prevent any problems
More informationDAYLIGHTING. Sustainable Daylighting Solutions. Fiberglass Reinforced Plastic Daylighting Panels for Metal Building Applications.
DAYLIGHTING Fiberglass Reinforced Plastic Daylighting Panels for Metal Building Applications Daylighting Solutions Engineered to survive in harsh environments, FRP won t rot, rust, mold or mildew and resists
More informationESR ICC Evaluation Service, Inc. Issued November 1, 2003 This report is subject to re-examination in one year.
ESR-1015 Issued November 1, 2003 This report is subject to re-examination in one year. ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 5360 Workman Mill Road, Whittier, California
More informationSECTION SLOPED TRANSLUCENT METAL SKYLIGHT SYSTEM
PART 1- GENERAL 1.1 SUMMARY A. Section Includes: SECTION 084523 - SLOPED TRANSLUCENT METAL SKYLIGHT SYSTEM 1. Flat factory prefabricated structural insulated translucent sandwich panels; with glazed endwalls.
More informationPlywood, Composite Wood Products, High-Pressure Laminates
Section 5 Plywood, Composite Wood Products, High-Pressure Laminates Contents 5.0.0 American Plywood Association (APA) grading guidelines 5.1.0 Plywood types and typical applications 5.1.1 APA-registered
More informationADDENDUM NO. 1. Bidders are hereby informed that the Construction Plans and/or Specifications are modified as follows:
ADDENDUM NO. 1 TO: PLANS AND SPECIFICATIONS FOR STATE OF MISSOURI KITCHEN RENOVATIONS BOONVILLE CORRECTIONAL CENTER BOONVILLE, MISSOURI PROJECT NO. C1609-03 Bid Opening Date is: (Not Changed) 1:30pm, Thursday,
More informationESR-1190 Reissued December 1, 2013 This report is subject to renewal December 1, 2014.
ICC-ES Evaluation Report ESR-90 Reissued December, 0 This report is subject to renewal December, 04. www.icc-es.org (800) 4-6587 (56) 699-054 A Subsidiary of the International Code Council DIVISION: 06
More informationRev. 07 8/15 Please Read Disclaimers:
FiberCorr panels Guidelines 6005.FC Rev. 07 8/15 Please Read Disclaimers: PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION!! These guidelines are provided in good faith to help prevent any problems
More informationFirst Class Building Products, Inc.
PART 1. GENERAL 1.01 RELATED DOCUMENTS First Class Building Products, Inc. SECTION 068200 GLASS FIBER REINFORCED POLYMER FABRICATIONS FIBER REINFORCED POLYMER- (FRP) A. Drawings, Conditions of the Contract
More informationPRODUCT SPECIFICATIONS
PART 1 GENERAL 1.01 SUMMARY A. Section Includes: High density cast resin architectural products, including columns, panels, caps, bases, trim elements and balustrade systems. Specifier Note: Article below
More informationWOOD I-JOIST AWARENESS GUIDE
WOOD I-JOIST AWARENESS GUIDE American Wood Council Flange Web Flange American Forest & Paper Association WOOD I-JOIST AWARENESS GUIDE The American Wood Council is part of the wood products group of the
More informationDecorative Fiberglass Reinforced Wall Panels
SECTION 097720 DECORATIVE FIBERGLASS REINFORCED WALL PANELS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: Prefinished polyester glass reinforced plastic sheets and adhered to unfinished gypsum wallboard.
More informationWALL & CEILING LINER PANELS
WALL & CEILING LINER PANELS WALL & CEILING LINER PANELS Quality, commitment and innovation Glasteel, with more than 50 years of experience, is one of the largest manufacturers of Fiberglass Reinforced
More informationLISTING INFORMATION OF International Beams - IB Series Joists SPEC ID: 27316
LISTING INFORMATION OF International Beams - IB Series Joists SPEC ID: 27316 International Beams Inc. 2010 Boul. St-Elzear Quest Laval, QC H7L 3N4 CANADA This report is for the exclusive use of Intertek
More informationCODE COMPLIANCE, STRENGTH AND SAVINGS IN ONE PANEL
A S S E M B L I E S A N D A P P L I C A T I O N S F O R B U I L D E R S CODE COMPLIANCE, STRENGTH AND SAVINGS IN ONE PANEL STRUCTURAL STRENGTH AND CODE COMPLIANCE IN A SINGLE PANEL Now there s a way to
More informationTYPICAL PHYSICAL STRENGTH PROPERTIES OF PRO TILE
TYPICAL PHYSICAL STRENGTH PROPERTIES OF PRO TILE The following results of eight different tests show the typical physical strength properties of Pro Tile. IMPACT STRENGTH Date: September 19, 1983 cement
More informationFiber Reinforced Polymer (FRP) Panels for Rail Station Platforms
Fiber Reinforced Polymer (FRP) Panels for Rail Station Platforms Introduction Scott Reeve, President, Composite Advantage Dayton, Ohio Engineered Solutions and Products for Infrastructure Large parts High
More informationESR-1365 Reissued March 2014 This report is subject to renewal April 1, 2015.
ICC-ES Evaluation Report www.icc-es.org (800) 423-6587 (562) 699-0543 ESR-1365 Reissued March 2014 This report is subject to renewal April 1, 2015. A Subsidiary of the International Code Council DIVISION:
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ROOFING AND SIDING PANELS REPORT HOLDER: FOUR SEASONS BUILDING PRODUCTS, LLC
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2229 Reissued 05/2018 This report is subject to renewal 05/2019. DIVISION: 07 00
More informationStandard Specification For Installation of ARMOROC PANEL For Roofs 1. GENERAL 1.01 SUMMARY OF WORK 1.02 DESCRIPTION OF ARMOROC PANEL
Standard Specification For Installation of ARMOROC PANEL For Roofs 9/28/15 SECTION 06100 1. GENERAL 1.01 SUMMARY OF WORK A. Materials shall be ARMOROC PANEL Cement Bonded Particle Board (CBPB) as distributed
More informationPhenolic Exterior Wall Cladding
Phenolic Exterior Wall Cladding SECTION 07 42 43 COMPOSITE WALL PANELS This specification includes hidden text for editing for a project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Phenolic wall
More informationLP OSB Sheathing & Structural 1 Sheathing
Rated OSB Sheathing Roof Panels Span Ratings Max. Live Load Thickness Span Rating for Roofs (lbs)** 3/8" 24/0 30 7/16" 24/16 40 15/32" 32/16 70 1/2" 32/16 70 19/32" 40/20 130 23/32" 48/24 175 1-1/8" 48
More informationSECTION SOLID SURFACE FABRICATIONS
SECTION 06651 SOLID SURFACE FABRICATIONS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the contract, including general and supplementary conditions and Division 1 Specification
More informationW all, Ceiling & Laminated Liner Panels
W all, Ceiling & Laminated Liner Panels Improved Chemical Resistance Resists stains Rust proof - will not corrode Minimum maintenance and never needs painting Superior Flexibility Panels are flexible enough
More informationCHAPTER 26 PLASTIC SECTION BC 2601 SECTION BC 2603 GENERAL FOAM PLASTIC INSULATION
CHAPTER 26 PLASTIC SECTION BC 2601 GENERAL 2601.1 Scope. These provisions shall govern the materials, design, application, construction and installation of foam plastic, foam plastic insulation, plastic
More informationENGINEERING SPECIFICATION PULTRUDED DYNADECK INTERLOCKING FLOORING
ENGINEERING SPECIFICATION PULTRUDED DYNADECK INTERLOCKING FLOORING January 24, 2014 06610-1 SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED FIBERGLASS INTERLOCKING FLOORING PART
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COATED FOAM ROOFING REPORT HOLDER: COVESTRO, LLC
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1221 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 07 00
More informationPRODUCT: Structural Insulated Panels (SIP) DIVISION: Wood and Plastics (06) SECTION: Structural Panels ( )
PRODUCT: Structural Insulated Panels (SIP) DIVISION: Wood and Plastics (06) SECTION: Structural Panels (06 12 16) Report Holder General Panel Corporation PO Box 279 2604 Sunset Drive Grenada, Mississippi
More informationTT-006B JULY 2008 TABLE A. ASTM C 627-TESTED ASSEMBLIES NOT LISTED BY TCNA. Tile Adhesive
Technical Topics TT-006B JULY 2008 Ceramic Over Wood Structural Panel Floors Wood structural panels have been used successfully under ceramic tile for decades. Due to the brittle nature of the tile, it
More informationPRP-108 Performance Standards and Policies for Structural-Use Panels
A P A S T A N D A R D PRP-108 Performance Standards and Policies for Structural-Use Panels Published by APA The Engineered Wood Association February 1994 A P A The Engineered Wood Association 1997 APA
More informationFilament Wound Architectural Columns: Blending Tradition with Technology
Filament Wound Architectural Columns: Blending Tradition with Technology These unique patented filament wound columns help preserve the past with authentic, perfectly detailed structure that is architecturally
More informationPLYCEM SX20/20 MODULAR BUILDING INDUSTRY FLOOR SYSTEM PLYCEM SX20/20 MODULAR BUILDING INDUSTRY FLOOR SYSTEM
A fiber cement subfloor panel that can be combined with other non-combustible materials to create modular building industry floor systems. Strong, durable fiber cement panel. Dimensionally stable, factory
More informationPRODUCT SPECIFICATIONS PULTRUDED GRATING AND TREADS SECTION PART 1 GENERAL
PRODUCT SPECIFICATIONS PULTRUDED GRATING AND TREADS SECTION 06600 PART 1 GENERAL 1.1 Related Documents A. Drawings and general provisions of Contract, including General and Supplementary Conditions and
More informationFRP Floor Panels Standard Specification
1. Scope Furnish all labor, materials, equipment and incidentals necessary to install the fiberglass reinforced polymer (FRP) products as specified herein. The work covered by this section shall include
More informationPRODUCT: Structural Insulated Panels (SIPs) DIVISION: Wood, Plastics, and Composites (06) SECTION: Structural Panels ( )
PRODUCT: Structural Insulated Panels (SIPs) DIVISION: Wood, Plastics, and Composites (06) SECTION: Structural Panels (06 12 00) Report Holder ACME Panel Company 1905 West Main St. Radford, VA 24141 Manufacturing
More informationSpecifications. Materials and Fabrication. Physical Properties. Environmental Impact. Sizes. Installation - General Requirements.
Specifications Materials and Fabrication Physical Properties LP FlameBlock Fire-Rated OSB Sheathing panels are made of oriented strand board (OSB) with a fire-resistant, cementitious coating (Pyrotite
More informationDS131 EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS
EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS 1. SCOPE 1.1 This specification covers the type, physical properties and dimensions of Expanded Polystyrene Insulation Board intended for use
More informationPRODUCT TECHNICAL DATA Vanceva Polyvinyl Butyral Interlayer
PRODUCT TECHNICAL DATA Vanceva Polyvinyl Butyral Interlayer Vanceva interlayers are premium colored plasticized polyvinyl butyral (PVB) sheets produced by Eastman Chemical Company and its affiliates. These
More informationFRP Fans Blow Away the Competition in Corrosive Applications
FRP Fans Blow Away the Competition in Corrosive Applications Corrosion can be exhausting. Air handling is a critical component within corrosive applications in many industries including chemical process,
More informationR-Matte Plus-3: Insulation for the Building Envelope
Attic and Crawl Space Applications R-Matte Plus-3 may be applied to the interior face of stud walls or roof rafters within attics and crawl spaces to provide a layer of continuous insulation (ci). Simply
More informationDIVISION: CONCRETE SECTION: CEMENTITIOUS WOOD FIBER DECKS DIVISION: FINISHES SECTION: ACOUSTIC ROOM COMPONENTS
0 ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org Most Widely Accepted and Trusted ESR-1112 Reissued 05/2017 Revised 08/2018 This report is subject to renewal 05/2019.
More informationFIBERGLASS REINFORCED PLASTIC (FRP) LAUNDER COVERS
FIBERGLASS REINFORCED PLASTIC (FRP) LAUNDER COVERS PART 1 GENERAL 1.1. SUMMARY A. This Section includes fiberglass reinforced plastic (FRP) launder covers for clarifier basins and other applications as
More informationfeaturing: RR (Rout & Return) Attachment System RS (RainScreen) Attachment System Envelope2000 Metal Composite Material (MCM)
featuring: RR (Rout & Return) Attachment System RS (RainScreen) Attachment System Envelope2000 Metal Composite Material (MCM) THE ULTIMATE IN BEAUTY AND PERFORMANCE. As shop-fabricated systems, the RR
More informationSECTION RESINOUS FLOORING
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 67 23 1. Use this section only for NCA projects. 2. Delete // // if not applicable to project. Also delete any other item or paragraph not applicable in the
More informationSECTION ROUGH CARPENTRY
SECTION 06100 PART 1 GENERAL 1.1 QUALITY ASSURANCE A. Lumber Grading: Lumber Grading Rules and Wood Species in accordance with Voluntary Product Standards. Grading rules of following associations apply
More informationEngineered Honeycomb Solutions and Services. Marine. Lightweight Panel Solutions for Marine Vessel Interiors
Engineered Honeycomb Solutions and Services Marine Lightweight Panel Solutions for Marine Vessel Interiors At Plascore we are committed to providing a high-quality product, paired with engineered solutions,
More information** REVISED BY THE CITY OF LOS ANGELES
ICC-ES Evaluation Report ESR-90 Reissued December, 2009 This report is subject to re-examination in two years. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council
More informationProduct Guide Specification
April 2014 6840 SW 81 Terrace Miami, Florida 33143 Phone 305-666-6676 Fax 305-666-7675 Website www.trimstonepanels.com E-mail stoneworks@stoneworksofart.com Product Guide Specification Specifier Notes:
More informationThe original. insulation.
The original recycled rubber impact sound insulation. ESTABLISHED 2000. SOUND INSULATION Original. Tested. Guaranteed. Previously Known As Dodge-Regupol QT ACHIEVING KICK NOISE OUT. THE INDUSTRY S BEST
More informationTooling Resins FOR SMOOTHER, MORE DURABLE MOLDS
Tooling Resins FOR SMOOTHER, MORE DURABLE MOLDS MoldTru Tooling Resins for smoother, lower cost molds in less time MoldTru tooling resins sharpen the competitive edge by providing a smoother tooling surface
More informationImage courtesy of KTGY, Inc. ENGINEERED FOR FIRE CODE COMPLIANCE AND DESIGN FLEXIBILITY
A S S E M B L I E S A N D A P P L I C A T I O N S Image courtesy of KTGY, Inc. ENGINEERED FOR FIRE CODE COMPLIANCE AND DESIGN FLEXIBILITY STRUCTURAL STRENGTH AND CODE COMPLIANCE IN A SINGLE PANEL LP FlameBlock
More informationPERMATHERM PIPE INSULATION PRODUCTS
PERMATHERM PIPE INSULATION PRODUCTS PERMATHERM, INC. 269 Industrial Park Road Monticello, GA 31064 (706) 468-7500 www.pipe-insulation.net September 2012 This Specification Guideline in the 3-Part Format
More informationEngineered Honeycomb Solutions and Services. Rail. Honeycomb Core and Panels for Rail Vehicle Interiors
Engineered Honeycomb Solutions and Services Rail Honeycomb Core and Panels for Rail Vehicle Interiors Benefits of Honeycomb Panels Lightweight Strong Stable Cost-Effective Moisture & Corrosion Resistant
More informationPLYCEM SX20/20 PREMIUM STRUCTURAL SUBFLOORING PLYCEM SX20/20 PREMIUM STRUCTURAL SUBFLOORING
PLYCEM SX20/20 A fiber cement subfloor that can be combined with other noncombustible materials to create 1- and 2-hour fire-rated floor-ceiling assemblies. Strong, durable fiber cement panel. Dimensionally
More informationImage courtesy of KTGY, Inc. ENGINEERED FOR FIRE CODE COMPLIANCE AND DESIGN FLEXIBILITY
A S S E M B L I E S A N D A P P L I C A T I O N S Image courtesy of KTGY, Inc. ENGINEERED FOR FIRE CODE COMPLIANCE AND DESIGN FLEXIBILITY STRUCTURAL STRENGTH AND CODE COMPLIANCE IN A SINGLE PANEL LP FlameBlock
More informationICBO Evaluation Service, Inc Workman Mill Road, Whittier, California *Revised April 2003
PFC-5804* Reissued February 1, 2003 ICBO Evaluation Service, Inc. 5360 Workman Mill Road, Whittier, California 90601 www.icboes.org Filing Category: DESIGN Wood PACIFIC WOODTECH CORPORATION PWI JOISTS
More informationPFC-5804* Reissued February 1, Filing Category: DESIGN Wood
PFC-50* Reissued February 1, 2003 ICBO Evaluation Service, Inc. 530 Workman Mill Road, Whittier, California 9001 www.icboes.org Filing Category: DESIGN Wood PACIFIC WOODTECH CORPORATION PWI JOISTS PACIFIC
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: MODIFIED BITUMINOUS SHEET ROOFING REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3909 Issued 07/2017 This report is subject to renewal 07/2018. DIVISION: 07 00 00
More informationCold Storage. Controlled Environments. CLEANsafe Solutions designed for the most demanding Controlled Environments
Cold Storage Controlled Environments Solutions designed for the most demanding Controlled Environments Cold Storage Finishes Kingspan Controlled environments take many different forms and the performance
More informationINNOVATION. TECHNOLOGY. SOLUTIONS. INSULATED PANELS SEE THE DIFFERENCE in appearance, value, performance and installation.
INNOVATION. TECHNOLOGY. SOLUTIONS. INSULATED PANELS SEE THE DIFFERENCE in appearance, value, performance and installation. 1 2 Leading the industry in technology, design flexibility, quality, and value
More informationELECTROSTATIC FLOORING Installation Instructions
ELECTROSTATIC FLOORING Installation Instructions Toro EL and Granit AS (Sheet and Tile) HANDLING AND STORAGE 1. Johnsonite Electrostatic Flooring and adhesives must be site conditioned at room temperature
More informationSilicone Rubber Foam. Suggested applications include, but are not limited to: Uncured Properties
RTF762 Silicone Rubber Foam Product Description Key Performance Properties RTF762 silicone rubber foam is a liquid compound which cures at room temperature to a medium density foam with the addition of
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: SHOP-APPLIED WOOD COATINGS SECTION: SHEATHING REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1365 Reissued 04/2018 This report is subject to renewal 04/2020. DIVISION: 06 00
More informationSECTION PLASTIC SURFACING
SECTION 06067 PLASTIC SURFACING PART 1 GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification sections, apply
More informationTEKTON Flashings and TEKTON Construction Tape
TEKTON Flashings and TEKTON Construction Tape Complete the system with TEKTON Flashings and Construction Tape. It is important to assure a tight building envelope when windows and siding are installed.
More informationENGINEERING SPECIFICATION NON-MAGNETIC RAISED FLOOR SYSTEM FOR MRI ROOM APPLICATIONS
ENGINEERING SPECIFICATION NON-MAGNETIC RAISED FLOOR SYSTEM FOR MRI ROOM APPLICATIONS PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES FIBERGRATE COVERED TOP MICRO-MESH MOLDED GRATING WITH NON-MAGNETIC GRATING
More informationPlastic Pallet Molding 101 By Richard Morgan Wilmington Machinery
Plastic Pallet Molding 101 By Richard Morgan Wilmington Machinery What Is A Plastic Pallet... Plastic pallets come in many shapes and sizes. It can be a 48 x 48 double deck, four way entry, heavy duty,
More informationEngineered Honeycomb Solutions and Services. Honeycomb Panels
Engineered Honeycomb Solutions and Services Honeycomb Panels Plascore Honeycomb Panels Light, Strong, Tough, Cost-Effective Plascore Honeycomb Panels are a high-strength, lightweight material that provide
More informationOVERKOTE E-100 Epoxy Floor Coating Technical Data
OVERKOTE E-100 Epoxy Floor Coating Technical Data PRODUCT DESCRIPTION OVERKOTE E-100 is a floor coating system applied at a thickness of 16 to 50 mils. It is designed for long term protection of concrete
More informationINNOVATIVE HYBRID WEARING SURFACES FOR FRP BRIDGE DECKS
16 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS INNOVATIVE HYBRID WEARING SURFACES FOR FRP BRIDGE DECKS Riyad S. Aboutaha Syracuse University Keywords: FRP decks, bridge decks, wearing surfaces Abstract
More informationPresentation Brochure. BirchPly Wire Mesh Transport Plywood Products and Applications.
Presentation Brochure BirchPly Wire Mesh Transport Plywood Products and Applications www.eximcorp.co.in BirchPly Wire Mesh Transport Plywood BirchPly plywood goes through a strict quality control from
More informationPH6000. Key Features
Phenolic Locker Series PH6000 Key Features ½ inch doors and end panels Durable, backed by a 20 year warranty. Ideal choice for wet-use areas including pools and recreation centers Graffiti resistant, permanent
More informationPASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 06651 - SOLID SURFACE FABRICATIONS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the contract, including general and supplementary conditions and Division 1 Specification
More informationWabo Crete StripSeal Parking Series Armored joint and elastomeric concrete expansion joint system
Wabo Crete StripSeal Parking Series Armored joint and elastomeric concrete expansion joint system Features Benefits Flexible applications Versatile movement Heavy duty Watertight DESCRIPTION: Variable
More informationPremium Fiberglass Products. QUALITY SPEED RELIABILITY Molded - Pultruded - Treads - Structurals - Ladders - Handrails
Premium Fiberglass Products QUALITY SPEED RELIABILITY Molded - Pultruded - Treads - Structurals - Ladders - Handrails 45,000 sq. ft. facility on 9+ acres Total solutions provider For over 20 years, Marco
More informationSECTION Fiber Reinforced Stucco 1
CSI SECTION 09200 FIBER REINFORCED STUCCO PART 1 GENERAL 1.01 SUMMARY A. Section Description: Provided lath and plaster where shown on the Drawings, as specified herein, and as needed for complete and
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: STRUCTURAL PLASTICS SECTION: PLASTIC DECKING REPORT HOLDER:
0 ICC-ES Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 Most Widely Accepted and Trusted ESR-3168 Reissued 02/2016 This report is subject to renewal 02/2017. DIVISION: 06 00 00 WOOD, PLASTICS
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: STRUCTURAL PANELS REPORT HOLDER: EVALUATION SUBJECT: STRUCTURAL PANELS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2182 Reissued 08/2018 This report is subject to renewal 06/2019. DIVISION: 06 00
More informationTechnical Terms. Live load is defined as a load temporarily applied to a structure, examples include; snow load, wind load, rain, objects and people.
Technical Terms ASTM ASTM stands for American Society for Testing and Materials. The non-profit organization develops codes and test standards for use in industry. The plastic industry has many different
More informationWherever Your Imagination Takes You NO.1 WORLDWIDE IN RIGID PVC FOAM SHEETS
Wherever Your Imagination Takes You NO.1 WORLDWIDE IN RIGID PVC FOAM SHEETS Working with Kömacel Machining Kömacel sheets can be easily and quickly worked with standard tools to process wood and metal
More informationRTF8510A Base. RTF8510B Curing Agent Color Black Beige Viscosity (cps) 9,000 6,000 Specific Gravity
Technical Data Sheet RTF8510 Description RTF8510 silicone rubber foam is a liquid compound which cures at room temperature to a medium density foam with the addition of a curing agent. The product is a
More information1.4 ASSEMBLY DESCRIPTION
CSI SECTION 07 24 00 Insulation & Finish System (EIFS) - Class PB SYSTEM OVERVIEW The Insul-Flex Standard System is a Class PB EIF System qualified for use on noncombustible construction, combustible non-residential
More informationSECTION STONE WALL FACINGS
SECTION 09 7500 STONE WALL FACINGS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. [Aluminum honeycomb] [Polymer aluminum] [Ceramic back] [Glass back] [Fire-retardant] [Fiberglass] core interior stone
More informationSECTION A. ACSE 7 Minimum Loads for Buildings and other Structures.
SECTION 06 12 00 STRUCTURAL INSULATED PANELS ------------------------------------------------------------------------------------------------------------ PART 1- GENERAL ----------------------------- 1.1
More informationDifferences between EnCon Insulated Precast and EIFS
Differences between EnCon Cover Differences between EnCon EnCon produces a number of different insulated precast concrete products. They range from Insulated Wall panels, Styrocore Insulated Wall Panels,
More informationProduct Guide Specification
Boral Composites Inc. February 2013 200 Mansell Court East, Suite 305 Roswell, Georgia 30076 Toll Free 888-9BORAL9 (888-926-7259) Website www.boraltruexterior.com E-mail info@truexterior.com Product Guide
More informationSECTION GENERAL. Part 1
SECTION 074200 GENERAL Part 1 1.1 SECTION INCLUDES A. CompactWood Panels: Solid wood veneer phenolic panels for exterior wall cladding of commercial and institutional buildings. 1.2 RELATED SECTIONS A.
More informationLock-Deck Laminated Decking
Lock-Deck Laminated Decking Lock-Deck is a structurally engineered product of two to five kiln-dried lumber laminations bonded together with an exterior waterproof adhesive to form glue-laminated decking.
More informationSECTION MECHANICALLY ASSISTED MOBILE STORAGE SHELVING PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 10560 MECHANICALLY ASSISTED MOBILE STORAGE SHELVING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationXSTRAND 3D Printing filaments by Owens Corning: redefining additive manufacturing performance
XSTRAND 3D Printing filaments by : redefining additive manufacturing performance Reinforced materials enabling new performance Materials designed for functional prototyping and industrial Excellent layer
More information