Detail Drawings THE BEST PANEL COMPANY. from. 126 Old Highway 60 East Hardinsburg, Kentucky Office:
|
|
- Candice Pierce
- 6 years ago
- Views:
Transcription
1 Detail Drawings from Rev. 4/ Old Highway 60 East Hardinsburg, Kentucky Office:
2 Dri-Plane screen / similar / Similar Non-Corrosive Fastener designed to meet substrate criteria. Type S or Type N Mortar 1/2 to 1 maximum Thin Masonry Veneer Util-A-Crete Concrete Backer Board 3/8 Adhesive (for use with Brick or Decorative Block) applied in Dabs (or) Structural Silicone (for use with Natural or Manufactured Stone) applied in Vertical Strips. Substrate TYPICAL WALL DETAIL
3 Interior Finish Wood Framing Barrier Around Corner 16 Min. Insulation Exterior Sheathing & Water Resistant Barrier Rain Guard 7/16 thick HD concrete Board (by BEST Panel Company THIN Brick by Evolution Brick Thin Brick or Similar) UTIL-A-CRETE PANEL SYSTEM FULL WALL & CORNER DETAIL:
4 Interior Finish Wood Framing Barrier Around Corner 16 Min. Insulation Exterior Sheathing Dri-Plane Rain Screen If Specified Barrier 5 1/2 Panel Offset Dimension *Varies by thickness of brick Thin Brick 7/16 Concrete Board (by BEST Panel Company THIN Brick by Evolution Brick or Similar) UTIL-A-CRETE PANEL SYSTEM CORNER DETAIL
5 Interior Finish Wood Framing Barrier Around Corner 16 Min. Insulation Exterior Sheathing Barrier Polystyrene Thickness will vary between 1 and 6 depending on R-Value. If drainage plane is required it will be etched in the back of the polystyrene. 3/8 Concrete Board (by BEST Panel Company THIN Brick by Evolution Brick or Similar) Thin Brick 3CI INSULATED PANEL CORNER DETAIL: SCALE: FULL / LAST REVISION: 2/4/16
6 Interior Finish Wood Framing Insulation Barrier Around Corner 16 Min. Exterior Sheathing Barrier Polystyrene Thickness will vary between 1 and 6 depending on R-Value. If drainage plane is required it will be etched in the back of the polystyrene. Thin Brick 3/8 Concrete Board (by BEST Panel Company THIN Brick by Evolution Brick or Similar) 3CI INSULATED PANEL FULL WALL AND CORNER DETAIL
7 WOOD STUD OSB SHEATHING 2 LAYERS- WEATHER RESISTANT BARRIER RIGID INSULATION Dri-Plane 65 FT X 4 FT ROLL, 1/4 INCH THICK UTIL-A-CRETE PANEL SYSTEM WOOD STUD WITH DRI-PLANE DETAIL
8 THERMASTEEL COMPOSITE STRUCTURAL INSULATED PANELS WATER VAPOR BARRIER Dri-Plane 65 FT X 4 FT ROLL, 1/4 INCH THICK UTIL-A-CRETE PANEL SYSTEM THERMASTEEL WITH DRI-PLANE DETAIL
9 1/8 per 10 of wall min. Soffit Galv. Flashing Non-Corrosive Soffit Fastener Dri-Plane rain screen / similar 3/8 Substrate Util-A-Crete 7/16 Concrete Backer Board Non-Corrosive Fastener designed to meet substrate criteria. TYPICAL SOFFIT DETAIL
10 Dri-Plane rain screen / similar Flashing Tape Wrapped Over Rigid Flashing Type S or Type N Mortar Util-A-Crete 7/16 Concrete Backer Board 26 Gauge Flashing Fastened & Adhered to Building Structure X to be determined by system thickness 3/4 2 1/2 x Control Joint Opening to be Determined by Architect or Engineer. Substrate 3/8 Non-Corrosive Fastener designed to meet substrate criteria. 1/2 to 1 maximum Thin Brick Veneer HORIZONTAL CONTROL JOINT
11 Dri-Plane rain screen / similar Util-A-Crete 1/2 Concrete Backer Board Non-Corrosive Fastener designed to meet substrate criteria. Structure Above FNDN Top of FNDN 3/4 2 1/2 x 26 Gauge Flashing Fastened & Adhered to Building Structure Masonry Foundation 1 1/2 min. 2 1/2 min. Masonry FNDN as required by code Flashing Tape Finished Grade Sidewalk as Occurs Flexible Sealant BASE DETAIL ABOVE GRADE
12 Dri-Plane rain screen / similar 1/2 to 1 maximum Thin Masonry Veneer Util-A-Crete 1/2 Concrete Backer Board Sealant w/ Backer Rod Flashing Tape Substrate Non-Corrosive Fastener designed to meet substrate criteria. Jamb Blocking Disclaimer of Liability - This detail is meant to show the installation of the Best Panel System only. Always check first with the window manufacturer for their recommendation on how to flash & install their windows. RECESSED WINDOW JAMB
13 0.090 " " TFC.345".355" THREAD BLANK DIAMETER ".132".136" #2 Square Recess " " #14-13 BUTTRESS THREAD FORM Major Dia.:.230" /.235" Minor Dia.:.148" /.134".250" PILOT PERFORMANCE REQUIRMENTS CONCENTRICITY: Drive to Shank =.013" TIR max DRILL/DRIVE: 16ga (.075") - 35lb load - 2,000RPM 3.5 seconds max (25 pcs sampling) TORSIONAL SHRENGTH: 90 inch pounds min. VIRTUAL DESIGN #14-13 x 4" DP2 SMALL HEAD ACTUAL SIZE " NOTES 1. Fasteners to meet SAE J-78 specifications for self-drilling fasteners. 2. All dimensions are nominal expect when noted. Normal heading tolerances permitted. 3. Two (2) #2 square drive power bits included in each KWIK-PAK bucket. Must be two-piece power bits. REDUCED SQUARE POWER BITS.350" REV Design information provided on this drawing is the property of Triangle Fastener Corporation, Pittsburgh, PA. Any use without written permission is prohibited. DRAWING NUMBER DESCRIPTION PART WEIGHT PART NUMBER TFC FASTENING SYSTEMS DESIGN CENTER 4661 HINCKLEY INDUSTRIAL PARKWAY CLEVELAND, OH PHONE: (216) FAX: (216) MATERIAL FINISH and CORROSION TEST REQUIREMENT HEAT TREATMENT CASE HARDEN (SAE J78) CUSTOMER PACKAGING Pack in 2-gal KWIK-PAK plastic buckets. CUSTOMER APPROVAL REVISIONS 3CI - SCREW REQUIREMENT
GAF EnergyGuard Polyiso Wall Sheathing
From: Technical Services May 15, 2013 GAF EnergyGuard Polyiso Wall Sheathing GAF s EnergyGuard Polyiso Wall Sheathing is intended to be installed on residential construction only. Application types include:
More informationWEIGHT PER PIECE (LBS.)
PRODUCT DESCRIPTION DATA SHEET 04 73 19-US BASIC USE ProGUARD DP is intended to be installed over sheathing and waterproofing over steel or wood studs or over concrete masonry units or poured concrete
More informationMasonry Veneer - Chapter 6. Masonry Veneer Anchored Veneer
Masonry Veneer - Chapter 6 Chapter 6 covers anchored and adhered veneer. Following are prescriptive requirements for areas with wind 110 mph Vertical support of masonry veneer Support: Noncombustible structural
More informationStone and Masonry Veneer
Stone and Masonry Veneer R703.7 Stone and masonry veneer, general. Stone and masonry veneer shall be installed in accordance with this chapter, Table R703.4 and Figure R703.7. These veneers installed over
More informationInsulation. First Revison October DC14 Drainage Mat INSTALLATION GUIDE FOR RESIDENTIAL & COMMERCIAL APPLICATIONS
Insulation First Revison October 2016 DC14 Drainage Mat INSTALLATION GUIDE FOR RESIDENTIAL & COMMERCIAL APPLICATIONS 1. General Information This Guide describes the use of Kingspan GreenGuard DC14 Drainage
More informationPella 250 Series. Wood Frame Construction with Vinyl Siding... V250-ID-888 Wood Frame Construction with Brick Veneer...
SECTION DIRECTORY General Information Introduction... V250-ID-886 Installation Accessories and Applications... V250-ID-886 Typical Sealant Placement Details... V250-ID-887 Fin Installation Details Wood
More informationWeatherSmart Air Barrier Installation Guide
WeatherSmart Air Barrier Installation Guide 1 The intent of this document is to provide a guide for the installation of WeatherSmart as both a Weather Resistive Barrier (W.R.B.) and an Air Barrier Material
More informationTechnical Data Sheet
Technical Data Sheet ProGUARD Concrete Insulated Sheathing Specifications & Installation Table Of Contents Product Description... pg. 1 Basic Use... pg. 1 Exterior Finishes... pg. 1 Standard Sizes... pg.
More informationCommercial Flashing Details
This technical note illustrates many of the most common flashing details for commercial buildings. The purpose for flashing is to direct moisture to the exterior and in so doing, prevent moisture from
More informationPebbletex Wall System Class PB Exterior Insulation and Finish System providing a primary moisture barrier. Typical Details
Pebbletex Wall System Class PB Exterior Insulation and Finish System providing a primary moisture barrier Typical Details (THIS PAGE INTENTIONALLY LEFT BLANK Pebbletex Wall System Class PB Exterior Insulation
More informationProGUARD DP The Game-changing Wall System
ProGUARD DP The Game-changing Wall System Arriscraft ARRIS-stack over ProGUARD DP Insulated Cement Board Panels, using Laticrete MVIS materials. PROGUARD DP INSULATED CONCRETE BOARD, manufactured by T.
More informationINSTALLING WATER-RESISTIVE BARRIERS & FLASHING
INSTALLING WATER-RESISTIVE BARRIERS & FLASHING IN A TWO-LAYER STUCCO APPLICATION Fortifiber Building Systems Group provides this guide to assist installers by demonstrating a two-layer installation of
More informationThe better way to build TM. Installation Manual NAILBASE PANELS
The better way to build TM Installation Manual PANELS November 2018 SIPs Installation Manual Table of Contents Topics General Requirements................................... 3 Materials..............................................
More informationINSTALLATION MANUAL. ZIP System R12 Sheathing. Contents. 07 ZIP System R12 Sheathing Window Installation 08 ZIP System R12 Sheathing Siding Guidelines
ZIP System R12 Sheathing INSTALLATION MANUAL Contents 02 ZIP System R12 Sheathing General Notes, Guidelines and Limitations 03 ZIP System R12 Sheathing Installation 05 ZIP System R12 Sheathing Non Structural
More informationProduct and System Specifications DuPont Flashing Systems
DuPont Building Innovations March 2007 4417 Lancaster Pike Chestnut Run Plaza 721 Wilmington, DE 19805 1-800-448-9835 www.construction.tyvek.com Product and System Specifications DuPont Flashing Systems
More informationA n c h o r a g e. M o v e m e n t. M o i s t ur e A SYSTEMS APPROACH TO THE DESIGN AND EXECUTION OF MASONRY CAVITY AND VENEER WALL SYSTEMS
A SYSTEMS APPROACH TO THE DESIGN AND EXECUTION OF MASONRY CAVITY AND VENEER WALL SYSTEMS To successfully design and build masonry cavity walls and veneers, one must take a systems approach. A masonry wall
More informationR E S I D E N T I A L B U I L D E R S R E F E R E N C E G U I D E
DRYVIT SYSTEMS CANADA DSC504 R E S I D E N T I A L B U I L D E R S R E F E R E N C E G U I D E BUILDING SUCCESSFULLY WITH DRYVIT OUTSULATION RESIDENTIAL SYSTEMS INTRODUCTION Building Successfully with
More informationELEVATION FOR DETAIL REFERENCE ONLY
6 7 8 10 26 19 20 14 15 22 SOFFIT OUTSIDE CORNER INSIDE CORNER 23 25 24 25 5 27 28 29 16 11 OPENING 17 18 END WALL 21 12 13 9 6 7 8 ELEVATION FOR DETAIL REFERENCE ONLY CSH-01 CSH-02 CSH-03 CSH-04 CSH-05
More informationKARRIER PANEL - BRICK
KPH-DS-01-BRICK KPH-PJ-01-BRICK KPH-PJ-02-BRICK KPH-PJ-03-BRICK KPH-BS-01-BRICK KPH-BS-02-BRICK KPH-BS-03-BRICK KPH-OC-01-BRICK KPH-FO-01-BRICK KPH-FO-02-BRICK KPH-FO-03-BRICK KPH-FO-04-BRICK KPH-FO-05-BRICK
More informationWELCOME. Recommended Window Installation. 1 credit Minnesota Department of Labor and Industry
WELCOME Recommended Window 1 credit Minnesota Department of Labor and Industry Course Credit In accordance with the Department of Labor and Industry s statute 326.0981, Subd. 11, This educational offering
More informationGuide Specification for the OSI QUAD Window and Door Flashing System
Henkel Corporation 26235 First Avenue Westlake, OH 1-866-591-2178 www.ositough.com Guide Specification for the OSI QUAD Window and Door Flashing System Specifier Note: The purpose of this guide specification
More informationSTRATUM GUARD I AND II An Exterior Insulation and Finish System with Drainage DSC106C. Stratum Guard I and II System Installation Details
STRATUM GUARD I AND II An Exterior Insulation and Finish System with Drainage DSC106C Stratum Guard I and II System Installation Details Stratum Guard I and II DETAIL Table of Contents NOTE SG.0.0.01 SG.0.0.02
More informationSPECIFICATION GUIDELINE
SPECIFICATION GUIDELINE Environmental Stoneworks Corporate Office 6300 East Stapleton Drive South Denver, CO 80216 Phone (303) 309-3040 Fax (303) 309-3059 www.estoneworks.com Environmental Stoneworks specification
More informationUltra Wall System. CAD Detail Sets
Ultra Wall System CAD Detail Sets Contents Page UWS-CM CAVITYMATE Ultra Contents 1-0 FOR: Details continuing on 1-1 thru 1-17 Cavity cut XPS board to fit between ladder tie masonry ties in CMU walls UWS-SL
More informationInstallation Guide Wall Panels
Installation Guide Wall Panels Jointless or Dry-Stacked Installation (Read Prior to installation) The MStone system is a jointless / dry-stacked installation where panels and corners fit tightly together
More informationProGUARD Guide Specification
ProGUARD Guide Specification MANUFACTURER Section: 072100 Insulating Sheathing T.Clear Corporation 3255 Symmes Rd. Hamilton, OH 45015 Phone: 800-544-7398 Phone: 513-870-9246 Fax: 513-870-9606 072113 Cementitious
More informationInspection Fundamentals: Stucco & EIFS
Inspection Fundamentals: Stucco & EIFS By Ben Gromicko To be able to identify the stucco system you must understand system components. You should understand the basic components of the most common stucco
More informationAcroWall-ES System. Class PB Exterior Insulation and Finish System providing a primary moisture barrier. Typical Details
Typical Details AcroWall-ES System Class PB Exterior Insulation and Finish System providing a primary moisture barrier 1. Typical AcroWall-ES System Application 2. Typical Aesthetic Reveal 3. Typical Window
More informationContents. ZIP System R-Sheathing
ZIP System R-Sheathing 2 Contents 02 ZIP System R-Sheathing General Notes, Guidelines and Limitations 03 ZIP System R-Sheathing Installation 05 Structural Bracing to Resist Lateral Forces 06 ZIP System
More informationSECTION REFLECTIVE-FACED, MASONRY CAVITY WALL INSULATION
MANUFACTURER S GUIDE SPECIFICATIONS SECTION 04 27 23 REFLECTIVE-FACED, MASONRY CAVITY WALL INSULATION 900 Hensley Lane Wylie TX 75098 800-527-7092 www.carlisleccw.com 07.09.13 Carlisle and R2+ are trademarks
More informationSECTION GYPSUM BOARD
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 29 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
More informationINSTALLATION GUIDE THE BEST PANEL COMPANY. 126 Old Highway 60 E Hardinsburg, KY Office: Rev.
INSTALLATION GUIDE THE BEST PANEL COMPANY Rev. 4/17 126 Old Highway 60 E Hardinsburg, KY 40143 Office: 270-788-3535 www.bestpanelcompany.com Product description The Best Panel Company (BPC) panels are
More informationSPECIFICATION GUIDELINE
Environmental StoneWorks specification guideline should be used to assist design professionals in the preparation of projects. Edit and delete items that may not be applicable. Verify all referenced section
More informationThin Architectural Splitface Block Veneer Specification Guide
Thin Architectural Splitface Veneer System with AccuTab Technology R Thin Architectural Splitface Block Veneer Specification Guide Section 04711: Manufactured Concrete Veneer Use this specification guide
More informationELEVATION FOR DETAIL REFERENCE ONLY
4 5 6 8 18 13 10 15 SOFFIT OUTSIDE CORNER INSIDE CORNER 16 17 3 19 20 11 9 OPENING 12 END WALL 14 7 4 5 6 ELEVATION FOR DETAIL REFERENCE ONLY EH-01 INDEX EH-02 STANDARD PANEL OFFERING EH-03 SIDE LAP DETAILS
More informationELEVATION FOR DETAIL REFERENCE ONLY
6 7 8 10 OUTSIDE CORNER 19 20 4 5 11 21 22 15 16 13 12 OPENING 14 SOFFIT 18 END WALL 17 INSIDE CORNER 9 6 7 8 ELEVATION FOR DETAIL REFERENCE ONLY CCV-01 CCV-02 CCV-03 CCV-04 CCV-05 CCV-06 CCV-07 CCV-08
More information14-1. Monumental Double-Hung Windows
Contents Architectural Basic Unit Details Single-Hung... 14-2 Basic Unit Details Double-Hung... 14-3 Suggested Product Applications... 14-4 Factory-applied 5-1/4, 6-9/16, 7-1/8 and custom width extension
More informationFaçade Architectural Wall Panel System - Guide Specification 3/11/2017 SECTION FRAMED DECORATIVE PANEL SYSTEMS PART 1 - GENERAL 1.
SECTION 09 7710 FRAMED DECORATIVE PANEL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: Decorative ½ / ¾ (13mm/19mm) thick prefinished panel with preengineered attachment clip along with hardware
More informationKNIGHT WALL SYSTEMS GUIDE DETAILS:
KNIGHT WALL SYSTEMS GUIDE DETAILS: HCI System (HORIZONTAL HCI-Girt ) for CLADDING PANELS HORIZONTAL ORIENTED GIRT ONLY SYSTEM DEPTH: 0.75 INCHES (FACE OF RIGID INSULATION TO FACE OF RAIL) QUICK LINK: SECTION
More informationKNIGHT WALL SYSTEMS GUIDE DETAILS:
KNIGHT WALL SYSTEMS GUIDE DETAILS: HCI System RAINSCREEN ATTACHEMNT HORIZONTAL ORIENTED GIRT VERTICAL PanelRail & RevealRail SYSTEM DEPTH: 1.5 INCHES (FACE OF RIGID INSULATION TO FACE OF RAIL) QUICK LINK:
More informationInstallation Guidelines
Installation Guidelines The Vertibreak Wall System: Installation Guidelines Rainscreen Insulation for New or Retrofit Construction Applications Vertibreak rainscreen insulation is an expanded polystyrene
More informationEPA Seal and Insulate with ENERGY STAR Insulation Product Certification Report: GAF EnergyGuard Polyiso Insulated Sheathing Board Insulation
UL LLC 333 Pfingsten Road Northbrook, IL 60062 2017-6-05 U.S. Environmental Protection Agency (EPA) Seal and Insulate with ENERGY STAR Insulation Product Certification Report Type EnergyGuard Polyiso Insulated
More informationNew Veneers Allow Greater Flexibility
New Veneers Allow Greater Flexibility A number of new veneer systems are being used with exterior insulation or standard insulation batts to create panels that are easily applied, provide outstanding insulation
More informationKNIGHT WALL SYSTEMS GUIDE DETAILS:
KNIGHT WALL SYSTEMS GUIDE DETAILS: MFI System - S-Series (HORIZONTAL) for CLADDING PANELS HORIZONTAL ORIENTED SYSTEM WITH OPTIONAL VERTICAL PanelRails (EXTERIOR INSULATION OMITTED FOR CLARITY) MINIMUM
More informationPATENTED. StoneFit Wall System WITH DRYFIT TECHNOLOGY
PATENTED StoneFit Wall System WITH DRYFIT TECHNOLOGY StoneFit Wall System with DryFit Technology An innovative stone cladding solution that uses patented interlocking panels. Product Features REDUCED LABOR
More informationSpec Master 5/7/ For each product requiring color and texture selection, provide full size samples.
SECTION 04812 (042012) MECHANICALLY ATTACHED BRICK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationCOMPOSITE PANEL SYSTEM SYSTEM OVERVIEW INDEX INSTALLATION SEQUENCE INSTALLATION SEQUENCE INSTALLATION SEQUENCE
COMPOSITE PANEL SYSTEM SYSTEM OVERVIEW INSTALLATION SEQUENCE TT 5-8 TT- 13 INSTALLATION SEQUENCE INSTALLATION SEQUENCE TT- 4 TT-10 TT-14 TT-12 TT- 3 TT-11 TT-10 TT- 9 TT-11 TT- 2 INDEX (TT- 0): SYSTEM
More informationDesign No. HI/BP PERIMETER FIRE BARRIER SYSTEM Hilti, Inc. ASTM E 2307 Table 1
FIRESTOP JOINT SPRAY CFS-SP WB SILICONE JOINT SPRAY CFS-SP SIL F-RATING 2-HR. 2-HR. T-RATING -HR. -HR. APPLICATION THICKNESS PERIMETER FIRE BARRIER SYSTEM Hilti, Inc. ASTM E 2307 Table /8" WET FILM (/6"
More informationIn accordance with the Department of Labor and Industry s statute , Subd. 11,
In accordance with the Department of Labor and Industry s statute 326.0981, Subd. 11, This educational offering is recognized by the Minnesota Department of Labor and Industry as satisfying 1 hour of credit
More informationBULLETIN FROM THE FIRST COAST CHAPTER ICC~BOAF
FIRST COAST CHAPTER INTERNATIONAL CODE COUNCIL (ICC) AND BUILDING OFFICIALS ASSOCIATION OF FLORIDA, INC. (BOAF) SERVING BAKER, BRADFORD, CLAY, DUVAL, NASSAU, PUTNAM, ST. JOHNS & UNION COUNTIES BULLETIN
More informationHammerStone Manufactured stone veneers for commercial & residential applications
HammerStone Manufactured stone veneers for commercial & residential applications Veneer Stone Specification Guide Section 04711: Manufactured Stone Veneer Use this specification guide for each individual
More informationENVELOPE The Ultimate In Performance In A Dry-Joint System RAINSCREEN (RS) SYSTEM TECHNICAL MANUAL
ENVELOPE 2000 RAINSCREEN (RS) SYSTEM The Ultimate In Performance In A Dry-Joint System TECHNICAL MANUAL System Assembly Substrate Layouts CAD Sections/Details Physical Properties Performance Properties
More informationExternal Steel Stud and Top Hat Walls. Details SYSTEMS 176 NON-FIRE RATED SYSTEMS 176 FIRE RATED SYSTEMS 178 BRICK VENEER SYSTEMS 183 INSTALLATION 185
Details SYSTEMS 176 NON-FIRE RATED SYSTEMS 176 FIRE RATED SYSTEMS 178 BRICK VENEER SYSTEMS 183 INSTALLATION 185 GENERAL REQUIREMENTS 185 FRAMING 185 PLASTERBOARD LAYOUT 189 PLASTERBOARD FIXING 190 EXTERIOR
More informationGYPSUM BOARD AND PLASTER
CHAPTER 25 SECTION 2501 GENERAL 2501.1 Scope. 2501.1.1 General. Provisions of this chapter shall govern the materials, design, construction and quality of gypsum board, lath, gypsum plaster and cement
More informationTER No Cultured Stone & ProStone Applications Over Continuous Insulation
Cultured Stone & ProStone Applications Over Continuous Insulation TER No. 1302-01 Boral Stone Products LLC 200 Mansell Court East, Suite 310 Roswell, GA 30076 419-318-5345 949-341-8890 (fax) chris.hines@boral.com
More informationSECTION GYPSUM BOARD
SECTION 09 29 00 GYPSUM BOARD PART 1 - GENERAL 1.01 SUMMARY A. Section Includes 1. Gypsum board screw attached to wood framing and furring members, joint treatment, and accessories. 2. Installation of
More informationHouseWrap Applications System R-Value: R-4.17 Horizontal Heat Flow Only
Installation Method (Existing Walls) 1. ESP Low-E Housewrap is installed over exterior wall sheathing, make sure reflective side faces out: foil flange faces down. 2. Determine width of ESP Low-E HouseWrap
More informationWall Assembly - ACM Metal Panel at Steel Stud Framing SCALE: 3" = 1'-0"
Thermafiber "RainBarrier 45" Nvelope "NH2" Bracket Adapter Nvelope Wall Bracket (90mm or as Req'd) ACM Metal Panel System Metal Panel Extrusion per ACM Manufactuer 1 2 " Self-Drilling Stainless Steel Fastener
More informationENVELOPE The Ultimate In Performance In A Wet-Sealed System ROUT & RETURN (RR) SYSTEM TECHNICAL MANUAL
ENVELOPE 2000 ROUT & RETURN (RR) SYSTEM The Ultimate In Performance In A Wet-Sealed System TECHNICAL MANUAL System Assembly Substrate Layouts CAD Sections/Details Physical Properties Performance Properties
More informationKNIGHT WALL SYSTEMS GUIDE DETAILS:
KNIGHT WALL SYSTEMS GUIDE DETAILS: MFI System - S-Series (VERTICAL) for CLADDING PANELS VERTICAL ORIENTED SYSTEM WITH OPTIONAL HORIZONTAL PanelRails (EXTERIOR INSULATION OMITTED FOR CLARITY) MINIMUM DEPTH:
More informationSept 30, 2004 Page 1
Sept 30, 2004 Page 1 This section includes a manufacturer's guide specification for TERRAFOAM EPS building insulation. Refer also to Product Description for detailed product properties, options, and other
More informationEclipse Energy Guard. Product Information & Installation Manual General Installation Requirements
Product Information & Installation Manual 01 Important Notice to Buyers and Users of RoyOMartin wall system These instructions are not intended to cover every installation requirement, application, detail
More informationGenesis Panel Systems LLC Dura-Max Brick Panel Siding Installation Instructions
Genesis Panel Systems LLC Dura-Max Brick Panel Siding Installation Instructions Thank you for purchasing the Genesis Dura-Max Brick Panel system for your project. The system allows you to have the look
More informationSECTION CEMENT BOARD SUPPORTED ADHERED MASONRY VENEER. 2. Installation materials including adhesives, mortars, and pointing mortars.
(Specifier Note: The purpose of this guide specification is to assist the Specifier in correctly specifying cement board supported adhered masonry. The Specifier needs to edit these guide specifications
More informationSECTION CEMENTITIOUS SHEATHING
SECTION 06 16 63 CEMENTITIOUS SHEATHING SPEC WRITER NOTES: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. Use this Section for exterior sheathing as a backup
More informationWEB BASED APPLICATION SPECIFIC INSTALLATION INSTRUCTIONS
WEB BASED APPLICATION SPECIFIC INSTALLATION INSTRUCTIONS Window Fastening Although all possible measures have been taken to insure the accuracy of the material presented, WIXSYS, and the author are not
More informationR-Matte Plus-3: Insulation for the Building Envelope
Attic and Crawl Space Applications R-Matte Plus-3 may be applied to the interior face of stud walls or roof rafters within attics and crawl spaces to provide a layer of continuous insulation (ci). Simply
More informationSECTION A. ACSE 7 Minimum Loads for Buildings and other Structures.
SECTION 06 12 00 STRUCTURAL INSULATED PANELS ------------------------------------------------------------------------------------------------------------ PART 1- GENERAL ----------------------------- 1.1
More informationXP500 THIN VENEER ADHESION MORTAR SUPERIOR WORKABILITY & ADHESION. MAXIMUM PRODUCTIVITY. DIVISION MORTAR (VM-07)
DIVISION MORTAR XP00 THIN VENEER ADHESION MORTAR SUPERIOR WORKABILITY & ADHESION. MAXIMUM PRODUCTIVITY. SPEC MIX Thin Veneer Adhesion Mortar XP00 is a premium preblended polymer modified thin set mortar
More informationCommercialComplete Wall System
FOAMULAR XPS Insulation, Joint SealR Foam Joint Tape, Eco Touch Flame Spread 25, Eco Touch Thermal Batt FIBERGLAS Insulation NFPA 285 Fire Tested Wall Assemblies Owens Corning s Commercial Complete Wall
More informationINTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES EVALUATION CRITERIA FOR ANCHORED MASONRY VENEER SYSTEM WITH POLYSTYRENE FOAM PLASTIC BACKING EC 021-2014 (Adopted
More informationELEVATION FOR DETAIL REFERENCE ONLY
8 4 5 6 9 16 10 15 11 SOFFIT 19 OUTSIDE CORNER 20 21 INSIDE CORNER 3 22 23 12 13 OPENING 14 END WALL 17 18 7 4 5 6 ELEVATION FOR DETAIL REFERENCE ONLY CSV-01 CSV-02 CSV-03 CSV-04 CSV-05 CSV-06 CSV-07 CSV-08
More informationSECTION A. ACSE 7 Minimum Loads for Buildings and other Structures.
SECTION 06 12 00 STRUCTURAL INSULATED PANELS ------------------------------------------------------------------------------------------------------------ PART 1- GENERAL ----------------------------- 1.1
More informationDetails for Exterior Brick Masonry Veneer Supported by Metal Plate Connected Wood Trusses
Details for Exterior Brick Masonry Veneer Supported by Metal Plate Connected Wood Trusses Released May 20, 2009 Updated March 9, 2011 Introduction: Wood frame structures with attached brick masonry veneer
More informationInsulation Fastener Guide IKO Ener-Air & IKO Enerfoil Wall Insulation
Insulation Fastener Guide IKO Ener-Air & IKO Enerfoil Design Considerations The type and frequency of a fastener system is typically decided by a structural engineer or in collaboration with a design professional.
More informationGuide to Attaching Exterior Wall Coverings through Foam Sheathing to Wood or Steel Wall Framing
Guide to Attaching Exterior Wall Coverings through Foam Sheathing to Wood or Wall Framing Released September 20, 2010 Updated December 4, 2012 Note: Tables for cladding attachments to wood framing have
More informationHow do you install yours?
How do you install yours? Darrell Paul Qualistat Building Performance Consultants CSA 440 Just about adding Peel & Stick? 1 Window and door problems Photos / videos Video available for viewing at INSTAGRAM
More information1 Exam Prep Application and Finishing of Gypsum Board GA Tabs and Highlights
1 Exam Prep Application and Finishing of Gypsum Board GA-216-2013 Tabs and s These 1 Exam Prep Tabs are based on the Gypsum Association GA-216-2013 Application and Finishing of Gypsum Panel Products. Each
More informationICC ES SYSTEM SYSTEM. Trusted DIVISION: 07 SECTION: AND FINISH REPORT HOLDER: ICC-ES Evaluation. Reissued 08/2016.
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.orgg ESR 2562 Reissued 08/206 This report is subject to renewal 08/208. DIVISION: 07 00 00
More informationIncorporating Insulating Sheathing into the Design of the Thermal and Moisture Management System of the Building Enclosure
Incorporating Insulating Sheathing into the Design of the Thermal and Moisture Management System of the Building Enclosure Peter Baker, Building Science Corporation ABSTRACT With rising utility cost, concerns
More informationWVU DESIGN GUIDELINES & CONSTRUCTION STANDARDS DIVISION 07 THERMAL AND MOISTURE PROTECTION SECTION JOINT SEALANT AND EXPANSION CONTROL
SECTION 079200 JOINT SEALANT AND EXPANSION CONTROL PART 1: GENERAL 1.1 Scope of Standard A. This standard provides general guidance concerning the specific preferences for jointing of exterior vertical
More information1 Exam Prep Application and Finishing of Gypsum Board GA Tabs and Highlights
1 Exam Prep Application and Finishing of Gypsum Board GA-216-2016 Tabs and s These 1 Exam Prep Tabs are based on the Gypsum Association GA-216-2016 Application and Finishing of Gypsum Panel Products. Each
More informationDuPont Tyvek Wall Underlay Install Guide
DuPont Tyvek Wall Underlay Install Guide (For Residential & Light Commercial Buildings) Acceptable Solution to NZBC E2/AS1 New Zealand As at 1/4/15 Version 2 Subject to change without notice DuPont Tyvek
More informationapplication instructions
application instructions FOUNDATIONS 76 & 120 SERIES PRIMED PANEL SIDING ARCHITECTURAL COLLECTION REVERSE BOARD & BATTEN AND STUCCO PANEL SIDING General At the time of manufacture, siding meets or exceeds
More informationSECTION Fiber Reinforced Stucco 1
CSI SECTION 09200 FIBER REINFORCED STUCCO PART 1 GENERAL 1.01 SUMMARY A. Section Description: Provided lath and plaster where shown on the Drawings, as specified herein, and as needed for complete and
More informationGold Bond BRAND Gypsum Sheathing
BRAND 09 06 29 16 00/NGC 43/NGC brand is a moisture-resistant sheathing installed on the outside of exterior framing as a substrate for exterior claddings. It is manufactured with a treated water-resistant
More informationSiding and Soffit Installation Guidelines
Siding and Soffit Installation Guidelines email web phone 07 46 16 Longboard Siding & Soffit INTRODUCTION INSTALLATION GUIDELINES NOTE: These instructions are prepared for persons experienced in the field
More informationSenturion TM III Wall System
Senturion TM III Wall System TYPICAL DETAILS 1017666 1. Senturion III Wall System Application (Plan VIew) 2. Senturion III Wall System Application (Isometric View) 3. Aesthetic Groove (Plan VIew) 4. Insulation
More informationExterior Brick Masonry Veneer Supported by Metal Plate Connected Wood Trusses (MPCWT) Design Guide Revised 11/17/2016
Exterior Brick Masonry Veneer Supported by Metal Plate Connected Wood Trusses (MPCWT) Design Guide Revised 11/17/2016 SBCA has been the voice of the structural building components industry since 1983,
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Thank you for purchasing our decorative Stone Panels. The investment in our panels will greatly increase the value of your home, and result in additional savings by lowering your
More informationNOVABRIK MORTARLESS CONCRETE BRICK VENEER SPECIFICATION. MASTERFORMAT SECTION (Mortarless Concrete Brick Veneer)
NOVABRIK MORTARLESS CONCRETE BRICK VENEER SPECIFICATION MASTERFORMAT SECTION 04818 (Mortarless Concrete Brick Veneer) Spec_USA_En_18102005.doc 12/1/2005 Novabrik Page 2 Section 04818 NOVABRIK MORTARLESS
More informationThermasheath -3. Insulation for the Building Envelope ROOF WALL SPECIALTY
Insulation for the Building Envelope ROOF WALL SPECIALTY PRODUCT DESCRIPTION Rmax Thermasheath-3 is an energy-efficient thermal insulation board composed of a closed-cell polyisocyanurate (polyiso) foam
More informationSenturion TM I Wall System
Senturion TM I Wall System TYPICAL DETAILS 1017662 1. Senturion I Wall System Application (Plan VIew) 2. Senturion I Wall System Application (Isometric View) 3. Aesthetic Groove (Plan View) 4. Insulation
More informationSECTION CLADDING SUPPORT SYSTEMS
************************************************************************************************************* SPECIFIER NOTE: The information provided below is intended to guide the Architect in developing
More informationHenri Fennell, CSI/CDT ABX 2015
Henri Fennell, CSI/CDT ABX 2015 Henri is an architect and building envelope specialist with over forty years of experience in the construction industry. He was a pioneer in the solar industry, introduced
More informationSECTION MANUFACTURED MASONRY VENEER
TM Dutch Quality Stone 18012 Dover Road Mt. Eaton, OH 44659 Tel: (330) 359-7866 Fax: (330) 359-5990 e-mail: info@dutchqualitystone.com website: www.dutchqualitystone.com SECTION 04 73 00 MANUFACTURED MASONRY
More informationSenergy Platinum CI Stucco Typical details for an impact resistant cement plaster stucco system featuring Neopor GPS Plus Rigid Insulation Board
Senergy Platinum CI Stucco Typical details for an impact resistant cement plaster stucco system featuring Neopor GPS Plus Rigid Insulation Board NOTES Senergy Platinum CI Stucco Typical details for an
More informationAll Metals Fabrication AMF FUSION DRILLFREE ALUMINUM COMPOSITE METAL (ACM) WALL PANEL SPECIFICATION
SECTION 07 42 43 All Metals Fabrication AMF FUSION DRILLFREE ALUMINUM COMPOSITE METAL (ACM) WALL PANEL SPECIFICATION SPEC NOTE: Optional text is indicated by square brackets []. Delete unwanted items and
More information