PRODUCT DATA SHEET. SikaFuko VT PRODUCT- DESCRIPTION

Size: px
Start display at page:

Download "PRODUCT DATA SHEET. SikaFuko VT PRODUCT- DESCRIPTION"

Transcription

1 PRODUCT DATA SHEET SikaFuko VT Re-injectable hose system with integral valves for sealing construction joints in watertight concrete structures PRODUCT- DESCRIPTION USES PRODUCT CHARACTERISTICS TESTING & APPROVALS Re-injectable joint sealing hose system with unique integral valves and all necessary accessories and fixings for reliable and secure waterproofing of construction joints in watertight concrete structures. -1 (6mm injection tube) and -2 (10 mm injection tube) are used for the engineered waterproofing of construction joints and as extra security for other expansion and construction joint waterproofing systems in watertight concrete construction. When cast in the structure, the system allows targeted injection of the joint or other areas using a suitable injection material. If water flushable injection materials, such as acrylate resins or a micro-fine cement based suspension are used, multiple re-injection operations are possible over the life of the structure, by vacuuming the hoses after each injection. Unique valve techniques for reliable injection Different versions with 6 (VT-1) or 10 mm (VT-2) injection tubes are available Re-injectable with Sika acrylic resins and micro-fine cement suspensions. One-time injectable with Sika polyurethane and epoxy resins Easy to install without disrupting formwork and reinforcement installation Tested in water pressures up to 10 bar (100 mws) Suitable for many different structures and construction methods Long-term references on many international projects Quick and easy installation without any effect on formwork and reinforcement works Can be used on a wide range of substrates MPA NRW: P-22-MPANRW-2368/2 - German Approval for use in construction joints ( ) WISSBAU: Tested for use in construction joints ( ) 1/7

2 PRODUCT DATA PACKAGING Product name Description Pack contents -1 unassembled -1 assembled -1 combi-pack -2 unassembled -2 assembled -2 combi-pack with 6 mm tube with 6 mm tube with 6 mm tube with 10 mm tube with 10 mm tube with 10 mm tube 200 m on disposable reel, no accessories Individual hoses and accessories to order 200 m on disposable reel with matched accessories 125 m on disposable reel, no accessories Individual hoses and accessories to order 125 m on disposable reel with matched accessories STORAGE LIFE STORAGE CONDITIONS TECHNICAL DATA 36 months from date of production Store in undamaged, unopened, original sealed packaging in dry conditions away from direct sunlight at temperatures between + 5 C and + 35 C. CHEMICAL BASE Core profile: PVC Valve strip: Neoprene, expanded Fabric: Polyester COLOUR MECHANICAL PROPERTIES HARDNESS ELONGATION AT BREAK TENSILE STRENGTH Yellow Core profile: 85 +/- 3 Shore A (DIN EN ISO 868) Valve strip: 20 +/- 5 Shore A (DIN EN ISO 868) Core profile: 250% (DIN EN ISO 527) Valve strip: 300% (DIN EN ISO 527) Fabric: 30% (DIN EN ISO 527) Core profile: 14 N/mm 2 (DIN EN ISO 527) Valve strip: 3 N/mm 2 (DIN EN ISO 527) Fabric: 30 N (DIN EN ISO 527) 2/7

3 SYSTEM DATA STRUCTURE -1 /-2 A Central injection tube B Core profile, high-grade PVC C Lateral grooves with regular injection ports D Flexible valve strips over the injection ports E Nylon mesh for secure fixing of the valve strips Central core profile and injection tube: SikaFuko-VT 1: Ø 6 mm SikaFuko-VT 2: Ø 10 mm ADDITIONAL SIKAFUKO VT TYPES AVAILABLE ON REQUEST DESIGN & PREPARATION SikaFuko-VT 3 SikaFuko-VT 4 Special type for top-down construction Electrically conductive profile with 10 mm injection tube injection hoses are approved for use in construction joints in accordance with German Building Regulations. More detailed information is available in the Certificate of Compliance. injection hoses can be used as back-up and to provide additional security for internal and external waterbars. It is attached to the waterbars by clips or clamps. The German Federal Specification for road tunnels (RIZ TFUG) uses internal expansion joint waterbars with the additional security of an injection hose as their Standard design. injection hoses can also be used as a secondary waterproofing system in critical areas. It is then normally installed on the water side. The clearance between the injection hose and waterbars or joint sheet waterstops, should be at least 5 cm. The injection hose location and positioning must also be defined on the basis of the structures thickness. 3/7

4 APPLICATION INSTRUCTIONS ASSEMBLY Cutting - The hose should be cut to the desired length. - To prevent the nylon mesh fraying, insulating tape should be wound around the cut end of the hose. Cutting the accessories for the end pieces: - The fabric reinforced PVC end hose (green, transparent) is cut to the desired length (standard ca. 40 cm). - The connecting tube and the shrink-on sleeve are cut to a length of approx. 5-6 cm for each end. Assembly: - A drop of superglue is applied on one half of the connecting tube, which is inserted halfway into the hose s central injection tube (Fig. 1). - A drop of superglue is then applied on the second half of the connecting tube. The fabric reinforced PVC end hose (green, transparent) is slid over the connecting tube (Fig. 2). - The shrink-on sleeve is then installed over the connection between the PVC end hose and the injection hose. This is carefully heated with a hot air gun and the sleeve shrinks to firmly hold the assembled hose section together (Fig. 3). - The injection grouting ends are sealed with closure plugs to prevent the entry of other materials(fig. 4). - The hose is now ready for installation 4/7

5 INSTALLATION INSTRUCTIONS Installation - The system is normally installed in lengths of up to 12 m. The prepared end hoses have to be included in this length. Longer lengths may be possible dependent on the location and the intended injection material. - The injection hose is usually installed on the hardened concrete surface in the middle of the construction joint. A minimum concrete cover of 10 cm over the injection hose must be maintained in reinforced concrete structures (Fig. 1). - The minimum distance between two parallel hose sections, e.g. at junctions, must be 5 cm. (Fig. 2). - If two injection hoses cross for construction reasons, e.g. at junctions, the upper hose must be installed using a section of PVC end hose (Fig. 2). Fixing - The injection hose is fixed to prevent it from sliding or floating in the fresh concrete with special clips or clamps at intervals of approx cm. These clips are pressed into 6 mm Ø drill holes (Figs. 2 & 4). - The injection hose should not be fastened to the reinforcement bars. It must lie flat throughout, and be routed in such a way that it is not buckled or constricted (Fig. 3). Junction boxes - For injection operations, the injection pumps are normally connected to the hose vent ends which are housed in protective junction / end boxes (Fig. 5, left). - The end hose section between the injection point and the injection hose must be embedded in concrete with a minimum cover of 5 cm. - The junction boxes must be located approx. 15 cm above horizontal construction joints or positioned adjacent to the vertical construction joints. Any other complex details / constraints must also be allowed for. - When installing the protective junction boxes, the injection and vent ends are both taken approx. 10 cm into the box so that the ends are accessible for injection later. - The protective junction boxes or injection packers must also be located where are still easily accessible for injection later. Injection ports or packers - The injection hose can also be injected through individual injection ports/packers (Fig. 5, right) or via the connection hose ends provided they have been continued sufficiently outside of the concrete (Fig. 5, centre). Documentation - The precise location of the protective junction end boxes or injection packers and the route of the injection hose should be carefully recorded (in as built drawings). 5/7

6 INJECTION Injection material The injection hose and the injection material together are a system which must therefore be tested for compatibility. Not every injection material is suitable for injection through hoses, as the injection material must have the following properties: - Adequate viscosity (< 200 MPa at 20 C) - Adequate curing time (> min.) The hose is injectable with several different Sika injection materials: Re-injectable: - Acrylate resins - Microfine cement suspensions - Cement paste ( 2 only) One-time injectable: - Polyurethane resins - Epoxy resins Principles of the hose systems During Concreting The neoprene strips close the injection openings so that no cement grout can enter the hose during the concrete placement. (Fig. 1). During Injection The injection pressure from inside the hose compresses the neoprene strips and allows the injection material to flow out from the openings located along the hose length. This enables a uniform discharge of the material over the whole length of the hose, which therefore has a high level of joint / void sealing and waterproofing capability (Fig. 2). Cleaning by vacuum When using acrylate resins or micro fine cement suspensions for injection, the hoses can be re-injected by vacuuming and flushing with water after each injection. The hose is then ready for any further re-injection (Figs. 3 & 4). Testing the watertightness The watertightness of the joints and the structure can also be tested using the hoses, by applying a defined water pressure through the hose. IMPORTANT NOTE s alone are not suitable for sealing movement joints. They can only be used for sealing movement / expansion joints when used in combination with suitable expansion joint waterbars. 6/7

7 IMPORTANT INFORMATION VALUE BASE HEALTH AND SAFETY INFORMATION LEGAL NOTES All technical data stated in this are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control. For information and advice on the safe handling, storage and disposal of chemical products, users should refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safetyrelated data. This information and, in particular, the suggestions relating to the application and end-use of our products, are based on our knowledge and experience in normal use, providing the products have been properly stored and applied. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of results achieved or liability arising out of any legal relationship whatsoever, can be inferred either from this information or from any advice offered by spoken word, unless we have been deliberately at fault or guilty of gross negligence. The user shall be required to prove that he has duly and in full extent submitted to Sika in writing all information necessary for Sika to make a fair and proper assessment. The user must test the products` suitability for the intended application and purpose. Sika reserves the right to change the product specifications. The proprietary rights of third parties must be observed. Orders are accepted subject to our current terms and conditions of sale and delivery. The most recent edition of the shall apply, copies of which should be requested from us. Sika Deutschland GmbH Flooring / Waterproofing Kornwestheimer Straße Stuttgart Deutschland Telefon: 0711/ Telefax: 0711/ info@de.sika.com Sika Deutschland GmbH 7/7

PRODUCT DATA SHEET. SikaFuko Eco-1 PRODUCT- DESCRIPTION. Re-injectable hose for sealing construction joints in watertight structures

PRODUCT DATA SHEET. SikaFuko Eco-1 PRODUCT- DESCRIPTION. Re-injectable hose for sealing construction joints in watertight structures PRODUCT DATA SHEET SikaFuko Eco-1 Re-injectable hose for sealing construction joints in watertight structures PRODUCT- DESCRIPTION USES PRODUCT CHARACTERISTICS TESTING & APPROVALS Re-injectable hose system

More information

Construction. Injectable hose with integral valves for sealing construction joints in watertight structures. Product Description. Product Data.

Construction. Injectable hose with integral valves for sealing construction joints in watertight structures. Product Description. Product Data. System Product Data Sheet Edition 22/02/2012 Identification no: 02 07 03 07 010 2 000099 SikaFuko Injectable hose with integral valves for sealing construction joints in watertight structures Construction

More information

Injectable hose with integral valves for sealing construction joints in watertight structures

Injectable hose with integral valves for sealing construction joints in watertight structures Technical Data Sheet Version 2014-09-18 Id no: 02 07 03 07 010 2 000099 SikaFuko SikaFuko Injectable hose with integral valves for sealing construction joints in watertight structures Construction Product

More information

Injectable hose with integral valves for sealing construction joints in watertight structures

Injectable hose with integral valves for sealing construction joints in watertight structures System Product Data Sheet Edition 2011-12_1 Injectable hose with integral valves for sealing construction joints in watertight structures Construction Product Description Uses Characteristics / Advantages

More information

Injectable Hose With Integral Valves for Sealing Construction Joints in Watertight Structures

Injectable Hose With Integral Valves for Sealing Construction Joints in Watertight Structures Product Data Sheet Edition: 01/05/2012 Identification no: 02 07 03 07 010 2 000099 Version no: UAE SikaFuko SikaFuko Injectable Hose With Integral Valves for Sealing Construction Joints in Watertight Structures

More information

Construction. Injectable hose for sealing construction joints in watertight structures. Product Description. Product Data. Tests.

Construction. Injectable hose for sealing construction joints in watertight structures. Product Description. Product Data. Tests. System Product Data Sheet Edition 09/01/2009 Identification no: 02 07 03 07 010 2 000099 ( SikaFuko Eco 1 Injectable hose for sealing construction joints in watertight structures Construction Product Description

More information

Construction. Injectable Hose for Sealing Construction Joints in Watertight Structures. Product Description. Tests. Product Data

Construction. Injectable Hose for Sealing Construction Joints in Watertight Structures. Product Description. Tests. Product Data Construction System Product Data Sheet Edition: 03/09/2013 Identification no: 02 07 03 07 010 2 000099 Version: GCC Injectable Hose for Sealing Construction Joints in Watertight Structures Product Description

More information

Injectable hose for sealing construction joints in watertight structures

Injectable hose for sealing construction joints in watertight structures System Product Data Sheet Edition 2011-11_1 Injectable hose for sealing construction joints in watertight structures Construction Product Description Uses Characteristics / Advantages Tests Approval /

More information

Sika KAB combination joint waterbars waterstopping systems

Sika KAB combination joint waterbars waterstopping systems PRODUCT DATA SHEET Sika KAB combination joint waterbars Waterbars for waterproofing construction and crack induced shrinkage joints in new reinforced concrete structures PRODUCT- DESCRIPTION KAB 125/KAB

More information

Sika Elastomer flanged waterbars

Sika Elastomer flanged waterbars PRODUCT DATA SHEET Sika Elastomer flanged waterbars Flanged Sika Waterbars based on elastomer, for loose and/or loose-fixed flanged joint water-stopping systems in reinforced concrete structures designed

More information

Sika Waterbars - Tricomer Clamped Type

Sika Waterbars - Tricomer Clamped Type PRODUCT DATA SHEET Waterstops for loose or loose/fixed clamped flange joint sealing in watertight concrete structures (in accordance with German Construction Approval certificate abp) PRODUCT DESCRIPTION

More information

Sika Tricomer Compression Seals

Sika Tricomer Compression Seals PRODUCT DATA SHEET Sika Tricomer Compression Seals Preformed Tricomer based profiles for covering and closing low movement joints PRODUCT DESCRIPTION are weather-resistant joint covering or closing profiles

More information

Construction. Hydrophilic, swellable hose for sealing construction joints in watertight structures. (formerly Sika Injectoflex HPM)

Construction. Hydrophilic, swellable hose for sealing construction joints in watertight structures. (formerly Sika Injectoflex HPM) System Product Data Sheet Edition 06/12/2010 Identification no: 02 07 03 07 010 2 000099 (formerly Sika Injectoflex HPM) SikaFuko Swell 1 (formerly Sika Injectoflex HPM) Hydrophilic, swellable hose for

More information

Sika Elastomer Compression Seals

Sika Elastomer Compression Seals PRODUCT DATA SHEET Sika Elastomer Compression Seals Preformed EPDM elastomer based joint closing and concealing profile strips PRODUCT DESCRIPTION are weather-resistant, EPDM elastomer based, joint covering

More information

Product Data Sheet SikaFuko Swell-1 Positioning Description Uses Advantages Approval / Standards Construction Product Data Packaging

Product Data Sheet SikaFuko Swell-1 Positioning Description Uses Advantages Approval / Standards Construction Product Data Packaging Product Data Sheet Version Nos.: 0414 SikaFuko Swell-1 Hydrophilic, swellable hose for sealing construction joints in watertight structures Construction Positioning Description Uses Swellable and injectable

More information

WATERPROOFING SikaFuko INJECTION HOSE SYSTEMS UNIQUE WATERPROOFING SOLUTIONS FOR CONSTRUCTION JOINTS

WATERPROOFING SikaFuko INJECTION HOSE SYSTEMS UNIQUE WATERPROOFING SOLUTIONS FOR CONSTRUCTION JOINTS SikaFuko INJECTION HOSE SYSTEMS UNIQUE SOLUTIONS FOR CONSTRUCTION JOINTS PROVEN INJECTION HOSE SYSTEM For construction joints, connections, back-up systems and other special applications FUNCTION OF SikaFuko

More information

According German Standard DIN part 1. Standard range of PVC-P based flexible waterstops for movement (expansion) and construction joint sealing

According German Standard DIN part 1. Standard range of PVC-P based flexible waterstops for movement (expansion) and construction joint sealing Product Data Sheet Edition 08/08/2014 Identification no: 02 07 03 50 330 0 000001 Sika Waterbar PVC-P Sika Waterbar PVC-P According German Standard DIN 18541 part 1 Standard range of PVC-P based flexible

More information

Construction. Tricosal Waterstops - Tricomer. Waterstops for joint sealing in watertight concrete construction according to DIN and DIN

Construction. Tricosal Waterstops - Tricomer. Waterstops for joint sealing in watertight concrete construction according to DIN and DIN Construction Product Data Sheet Edition 19 April 2013 Tricosal Waterstops - Tricomer Waterstops for joint sealing in watertight concrete construction according to DIN 18541 and DIN 18541-2 Product Description

More information

PVC profile waterstops for joint sealing

PVC profile waterstops for joint sealing Product Data Sheet Edition 29/08/2014 Identification no: 02 07 03 01 005 0 000007 Sika - PVC Waterbars PVC profile waterstops for joint sealing Construction Product Description Uses Characteristics / Advantages

More information

Construction. Flexible PVC waterstops. Product Description. Product Data. Tests. Form. Storage. Technical Data

Construction. Flexible PVC waterstops. Product Description. Product Data. Tests. Form. Storage. Technical Data Construction Product Data Sheet Edition 2016-07_1 Flexible PVC waterstops Product Description Uses Characteristics / Advantages Flexible PVC waterstops used to seal construction and expansion joints in

More information

CHARACTERISTICS / ADVANTAGES

CHARACTERISTICS / ADVANTAGES PRODUCT DATA SHEET Flexible PVC Waterstops PRODUCT DESCRIPTION Flexible PVC waterstops used to seal construction and expansion joints in concrete structures. Sika -Waterbars are available in different

More information

TECHNICAL DATA SHEET SIKA ANCHORFIX-1 GREY 300ML (6's)

TECHNICAL DATA SHEET SIKA ANCHORFIX-1 GREY 300ML (6's) TECHNICAL DATA SHEET SIKA ANCHORFIX-1 GREY 300ML (6's) Sika AnchorFix-1 is a single cartridge, two component, mix-in-the-nozzle, fast curing, solvent and styrene free, methacrylate based chemical anchoring

More information

Construction. 1-part floor joint sealant. Product Description. Product Data. Tests. Form. Storage

Construction. 1-part floor joint sealant. Product Description. Product Data. Tests. Form. Storage Product Data Sheet Edition 19/09/2011 Identification no: 01 05 01 01 005 0 000001 Sikaflex Floor Sikaflex Floor 1-part floor joint sealant Product Description is a moisture curing 1-part elastic sealant

More information

2-part epoxy impregnation resin

2-part epoxy impregnation resin Product Data Sheet Edition 21/05/2015 Identification no: 020206040010000006 2-part epoxy impregnation resin Product Description is a two part, epoxy based impregnating resin. Uses Impregnating resin for

More information

DECLARATION OF PERFORMANCE. Sikafloor-264 N

DECLARATION OF PERFORMANCE. Sikafloor-264 N DECLARATION OF PERFORMANCE 1 UNIQUE IDENTIFICATION of the product-type: 2 INTENDED USE/ES or intended uses of the construction product in accordance with the applicable harmonized technical specification

More information

DECLARATION OF PERFORMANCE. Sikafloor-3240

DECLARATION OF PERFORMANCE. Sikafloor-3240 DECLARATION OF PERFORMANCE 1 UNIQUE IDENTIFICATION of the product-type: 2 INTENDED USE/ES or intended uses of the construction product in accordance with the applicable harmonized technical specification

More information

MASTERFLEX 900-FUKO Injection System

MASTERFLEX 900-FUKO Injection System MASTERFLEX 900-FUKO Injection System Injection Hose Waterstop System for Construction and Cold Joints in Concrete Function and use The Masterflex 900 hose system is replacing PVC-Waterbars in construction

More information

Construction. Universal anchoring adhesive. Product Description 1 1/7. Product Data Sheet Edition _1 Sika AnchorFix -S

Construction. Universal anchoring adhesive. Product Description 1 1/7. Product Data Sheet Edition _1 Sika AnchorFix -S Product Data Sheet Edition 2010-08_1 Sika AnchorFix -S Sika AnchorFix -S Universal anchoring adhesive Construction Product Description Uses Characteristics / Advantages Styrenated polyester based two part

More information

Swellable joint sealing profiles

Swellable joint sealing profiles Product Data Sheet Edition 01/06/2007 Identification no: 02 07 03 07 001 0 000005 Swellable joint sealing profiles Construction Product Description Uses Characteristics / Advantages Tests Sealing profiles

More information

1-part polyurethane pourable self levelling floor joint sealant

1-part polyurethane pourable self levelling floor joint sealant Product Data Sheet Edition 29/03/2007 Identification no: 02 05 01 01 018 0 000001 1-part polyurethane pourable self levelling floor joint sealant Construction Product Description Uses Characteristics /

More information

TECHNICAL DATA SHEET SIKADUR 31 CF NORMAL 6KG

TECHNICAL DATA SHEET SIKADUR 31 CF NORMAL 6KG TECHNICAL DATA SHEET SIKADUR 31 CF NORMAL 6KG Sikadur 31 is a two component solvent-free, cold cure, thixotropic epoxy adhesive suitable for damp and dry substrates. Available in two grades - Normal and

More information

Sealing profiles which swell in contact with water.

Sealing profiles which swell in contact with water. Product Data Sheet Edition 21/02/2012 Identification no: 02 07 03 07 001 0 SikaSwell -P Profiles Swellable joint sealing profiles Construction Product Description Uses Characteristics / Advantages Tests

More information

Construction. Universal anchoring adhesive. Product Description. Tests. Product Data Sheet Edition _1. 1 Sika AnchorFix S 1/6

Construction. Universal anchoring adhesive. Product Description. Tests. Product Data Sheet Edition _1. 1 Sika AnchorFix S 1/6 Product Data Sheet Edition 2014-01_1 Sika AnchorFix S Sika AnchorFix S Universal anchoring adhesive Product Description Styrenated polyester based two part anchoring adhesive. Construction Uses Characteristics

More information

1-part high performance sealant for flooring

1-part high performance sealant for flooring Product Data Sheet Edition 26/07/2007 Identification no: 02 05 01 01 005 0 000001 Sikaflex PRO-3 WF 1-part high performance sealant for flooring Construction Product Description Uses Characteristics /

More information

Sika Hydrotite CJ K

Sika Hydrotite CJ K Sika HYDROPHILIC STRIP FOR SEALING SITE FORMED CONCRETE JOINTS DESCRIPTION Sika is a hydrophilic rubber sealing strip used to seal site formed construction joints. Note: Sika is not a sealing material

More information

Sikadur -330 is a two part, thixotropic epoxy based impregnating resin / adhesive.

Sikadur -330 is a two part, thixotropic epoxy based impregnating resin / adhesive. Product Data Sheet Edition 21/02/2012 Identification no: 02 04 01 04 001 0 000004 2-part epoxy impregnation resin Construction Product Description is a two part, thixotropic epoxy based impregnating resin

More information

Part of the Sikaplan WT Membrane System

Part of the Sikaplan WT Membrane System Product Data Sheet Edition: 07.2011 Version 2011-10-19 Sikaplan WT Tape 200 Sikaplan WT Tape 200 Part of the Sikaplan WT Membrane System Product Description Uses Characteristics/ Advantages The Sikaplan

More information

TECHNICAL DATA SHEET SIKADUR 31 RAPID 1.2KG

TECHNICAL DATA SHEET SIKADUR 31 RAPID 1.2KG TECHNICAL DATA SHEET SIKADUR 31 RAPID 1.2KG Sikadur -31 is a two component solvent free, cold cure, thixotropic epoxy adhesive suitable for damp and dry substrates. Available in two grades - 31CF Normal

More information

Sealing profiles which swell in contact with water.

Sealing profiles which swell in contact with water. Product Data Sheet Edition 09/08/2007 Identification no: 02 07 03 07 001 0 SikaSwell -P Profiles Swellable joint sealing profiles Construction Product Description Uses Characteristics / Advantages Tests

More information

WATERPROOF X 1 INJECTION HOSE SYSTEM

WATERPROOF X 1 INJECTION HOSE SYSTEM WATERPROOF X 1 INJECTION HOSE SYSTEM PRODUCT DESCRIPTION Waterproof X 1 is the brand name of a state of art, multi-injectable injection hose system, used to seal joints in concrete against water egress.

More information

Construction. 2-part epoxy impregnation resin. Product Description. Product Data. Tests. Form. Product Data Sheet Edition 4 March 2015

Construction. 2-part epoxy impregnation resin. Product Description. Product Data. Tests. Form. Product Data Sheet Edition 4 March 2015 Construction Product Data Sheet Edition 4 March 2015 2-part epoxy impregnation resin Product Description is a two part, thixotropic epoxy based impregnating resin / adhesive. Uses Impregnation resin for

More information

Product Data Sheet Sikadur -31 CF Normal Product Description Uses ruction Const Characteristics / Advantages

Product Data Sheet Sikadur -31 CF Normal Product Description Uses ruction Const Characteristics / Advantages Construction Product Data Sheet Edition 02/12/2013 Identification no: 02 04 02 03 001 0 000039 Sikadur -31 CF Normal 2-part thixotropic epoxy adhesive Product Description Uses Characteristics / Advantages

More information

PRODUCT DATA SHEET Sika AnchorFix -S

PRODUCT DATA SHEET Sika AnchorFix -S PRODUCT DATA SHEET UNIVERSAL ANCHORING ADHESIVE DESCRIPTION Styrenated polyester based 2-component anchoring adhesive. USES may only be used by experienced professionals. As a fast curing anchoring adhesive

More information

1-part elastic joint sealant and multipurpose adhesive

1-part elastic joint sealant and multipurpose adhesive Product Data Sheet Edition 31/10/2006 Identification no: 02 05 01 01 005 0 000001 1-part elastic joint sealant and multipurpose adhesive Construction Product Description Uses Characteristics / Advantages

More information

Construction. 2-pack Polyurethane grout for rail fixing. Productdescription. Product Data. Product Data Sheet edition 08.09

Construction. 2-pack Polyurethane grout for rail fixing. Productdescription. Product Data. Product Data Sheet edition 08.09 Product Data Sheet edition 08.09 Icosit KC 340/45 2-pack Polyurethane grout for rail fixing Productdescription is a flexible two-component polymer grout based on polyurethane resin, hand and machine applicable.

More information

Sika Injection Systems for Concrete Structures. Concrete Structures

Sika Injection Systems for Concrete Structures. Concrete Structures Sika Injection Systems for Concrete Structures Sika is a globally active company in the speciality and construction chemicals business. It has subsidiary manufacturing, sales and technical support facilities

More information

Icosit KC 340/65 is a flexible two-component polymer grout based on polyurethane resin, hand and machine applicable.

Icosit KC 340/65 is a flexible two-component polymer grout based on polyurethane resin, hand and machine applicable. Product Data Sheet Edition 09.14 Icosit KC 340/65 Ident No.: E 7340 Icosit KC 340/65 2-pack, Polyurethane grout for rail fixing Product Description Icosit KC 340/65 is a flexible two-component polymer

More information

TECHNICAL DATA SHEET SIKAFLEX FLOOR

TECHNICAL DATA SHEET SIKAFLEX FLOOR TECHNICAL DATA SHEET SIKAFLEX FLOOR A 1-part, moisture curing, elastic joint sealant with high mechanical resistance for flooring. Buy SIKAFLEX FLOOR at https://www.spcsupplies.com//products/sikaflex-floor/

More information

Sarnavap 1000E is an unsupported vapour control layer based on PE-LD (Low Density Polyethylen).

Sarnavap 1000E is an unsupported vapour control layer based on PE-LD (Low Density Polyethylen). Roofing Roofing Product Data Sheet Edition 06.2013 Version no. DE 01 English Vapour control layer Product Description Uses Characteristics / Advantages Tests is an unsupported vapour control layer based

More information

Product Data Sheet Product n Description Uses tio tru Characteristics / C Advantages Tests Approval / Standards

Product Data Sheet Product n Description Uses tio tru   Characteristics / C Advantages Tests Approval / Standards Product Data Sheet Edition 01/02/2012 Identification no: 01 04 02 03 001 0 000039 Sikadur -31 CF Normal 2-part thixotropic epoxy adhesive Construction Product Description Uses Characteristics / Advantages

More information

Non-sag, ultra low modulus, neutral cure silicone sealant for pavements

Non-sag, ultra low modulus, neutral cure silicone sealant for pavements Product Data Sheet Edition:21/02/2012 Identification no: 020505052020000001 Sikasil 728 NS Sikasil -728 NS Non-sag, ultra low modulus, neutral cure silicone sealant for pavements Construction Product Description

More information

PRODUCT DATA SHEET Sika Waterbars Elastomer Type

PRODUCT DATA SHEET Sika Waterbars Elastomer Type PRODUCT DATA SHEET Sika Waterbars Elastomer Type Waterstops for joint sealing in watertight concrete structures according to DIN 7865-1-2 PRODUCT DESCRIPTION Sika Waterbars Elastomer Type are permanently

More information

2-part epoxy impregnation resin

2-part epoxy impregnation resin Product Data Sheet Edition 22/11/2006 Identification no: 02 04 01 04 001 0 000004 2-part epoxy impregnation resin Construction Product Description Sikadur -330 is a two part, solvent free, thixotropic

More information

Construction. Adhesive for bonding Carbon Fibre & Steel reinforcement. Product Description. Tests

Construction. Adhesive for bonding Carbon Fibre & Steel reinforcement. Product Description. Tests Product Data Sheet Edition 10/12/2014 Identification no: 02 04 01 04 001 0 000001 Sikadur -30 Adhesive for bonding Carbon Fibre & Steel reinforcement Construction Product Description Uses Characteristics

More information

Icosit KC 340/45 is a flexible two-component polymer grout based on polyurethane resin, hand and machine applicable.

Icosit KC 340/45 is a flexible two-component polymer grout based on polyurethane resin, hand and machine applicable. Product Data Sheet Edition 09.14 Icosit KC 340/45 Ident No.: E 7345 Icosit KC 340/45 2-pack, Polyurethane grout for rail fixing Product Description Icosit KC 340/45 is a flexible two-component polymer

More information

PRODUCT DATA SHEET Sikadur 31 CF Normal (formerly Sikadur 731)

PRODUCT DATA SHEET Sikadur 31 CF Normal (formerly Sikadur 731) PRODUCT DATA SHEET (formerly Sikadur 731) 2-part Thixotropic Epoxy Adhesive PRODUCT DESCRIPTION Sikadur-31 CF Normal is a solvent-free, moisture tolerant, thixotropic, structural two part adhesive and

More information

Tooling & Composites. Biresin CR134 FR Composite resin system. Product Data Sheet Version 05 / 2017

Tooling & Composites. Biresin CR134 FR Composite resin system. Product Data Sheet Version 05 / 2017 Product Data Sheet Version 05 / 2017 CR134 FR Composite resin system Tooling & Composites Product Description CR134 FR is a filled epoxy resin system suitable for the production of fire resistant high

More information

3-part thixotropic epoxy patching mortar

3-part thixotropic epoxy patching mortar Product Data Sheet Edition 28/08/2006 Identification no: 02 04 02 03 001 0 000044 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages Sikadur -41

More information

PRODUCT DATA SHEET Sika AnchorFix -2+ Tropical

PRODUCT DATA SHEET Sika AnchorFix -2+ Tropical ANCHORING ADHESIVE FOR MEDIUM TO HIGH LOADS DESCRIPTION Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive for arctic/cold climate conditions. USES may only be used by experienced

More information

SIKA EGYPT. Injection Systems. Scope: Highly expansion solvent free water-reactive two part Polyurethane foam injection system

SIKA EGYPT. Injection Systems. Scope: Highly expansion solvent free water-reactive two part Polyurethane foam injection system Method Statement for Application of Sika Injection 20 SIKA EGYPT Injection Systems Scope: Highly expansion solvent free water-reactive two part Polyurethane foam injection system INTRODUCTION: The water

More information

Construction. 2-part epoxy impregnation resin. 1 Sikadur /6

Construction. 2-part epoxy impregnation resin. 1 Sikadur /6 Product Data Sheet Edition 05/01/2009 Identification no: 02 04 01 04 001 0 000006 2-part epoxy impregnation resin Construction Description Uses Characteristics / Advantages Test Approval / Standards Product

More information

Physical Data Resin (A) Hardener (B) Individual Components Biresin CR81

Physical Data Resin (A) Hardener (B) Individual Components Biresin CR81 Product Data Sheet Version 08 / 2013 Biresin CR81 Composite resin system Tooling & Composites Areas of Application For infusion and injection processing Specially for applications for which resins with

More information

PRODUCT DATA SHEET Sikadur -31 DW

PRODUCT DATA SHEET Sikadur -31 DW PRODUCT DATA SHEET 2-PART EPOXY ADHESIVE WITH APPROVAL FOR DRINKING WATER CONTACT DESCRIPTION 2-part adhesive and repair mortar, based on epoxy resins and special fillers which has been specially formulated

More information

Injection Systems for Concrete Structures. Causes, Remedies and Repairs

Injection Systems for Concrete Structures. Causes, Remedies and Repairs Injection Systems for Concrete Structures Causes, Remedies and Repairs Overview - General introduction - Reason for cracks - Different types of cracks - Crack characteristics - Crack investigation and

More information

Tooling & Composites. Biresin CR122. Composite resin system. Product Data Sheet Version 05 / 2017

Tooling & Composites. Biresin CR122. Composite resin system. Product Data Sheet Version 05 / 2017 Product Data Sheet Version 05 / 2017 Biresin CR122 Composite resin system Tooling & Composites Product Description Biresin CR122 is a medium viscosity epoxy resin system suitable for the production of

More information

Liquid applied polyurea hybrid membrane

Liquid applied polyurea hybrid membrane Product Data Sheet Edition 07/08/2008 Identification no: 02 06 07 01 001 0 000015 Sikalastic -842 BG Liquid applied polyurea hybrid membrane Product Description Sikalastic -842 BG is a two part, highly

More information

PVC profile waterstops for joint sealing

PVC profile waterstops for joint sealing Product Data Sheet Edition 09/05/2016 Identification no: 02 07 03 01 Sika -Waterbars PVC profile waterstops for joint sealing Construction Product Description Characteristics / Advantages Tests Approval

More information

1-part polyurethane sealant for building joints

1-part polyurethane sealant for building joints Product Data Sheet (Temporary) Edition 03/2010 Sikaflex -Construction (AP) 1-part polyurethane sealant for building joints Product Description Sikaflex -Construction (AP) is a one part, moisture curing,

More information

1-part elastic joint sealant and multipurpose adhesive

1-part elastic joint sealant and multipurpose adhesive Product Data Sheet Edition 15/11/2005 Identification no: 02 05 01 01 005 0 000001 1-part elastic joint sealant and multipurpose adhesive Construction Product Description Uses Characteristics / Advantages

More information

Construction. Adhesive for bonding reinforcement. Product Description. Tests. Product Data Sheet Edition 16 December 2014

Construction. Adhesive for bonding reinforcement. Product Description. Tests. Product Data Sheet Edition 16 December 2014 Product Data Sheet Edition 16 December 2014 Sikadur -30 Adhesive for bonding reinforcement Product Description Sikadur -30 is a thixotropic, structural two part adhesive, based on a combination of epoxy

More information

SikaInjectionSystemsfor ConcreteStructures

SikaInjectionSystemsfor ConcreteStructures SikaInjectionSystemsfor ConcreteStructures Sika Injection Systems for Concrete Structures Typical Problems in Concrete Structures Waterproofing of Construction Joints Surface Sealing of leaking Concrete

More information

PRODUCT DATA SHEET Sikadur -32 Normal

PRODUCT DATA SHEET Sikadur -32 Normal PRODUCT DATA SHEET 2-COMPONENT STRUCTURAL EPOXY BONDING AGENT PRODUCT DESCRIPTION is a moisture tolerant, structural, two part bonding agent, based on a combination of epoxy resins and special fillers,

More information

Construction. Easy to spread, semi-elastic adhesive for full surface wood floor bonding. Product Description. Product Data. Form.

Construction. Easy to spread, semi-elastic adhesive for full surface wood floor bonding. Product Description. Product Data. Form. Product Data Sheet Edition 02/09/2010 Identification no: 02 05 02 01 300 0 000004 SikaBond -T45 Easy to spread, semi-elastic adhesive for full surface wood floor bonding Construction Product Description

More information

CONSTRUCTION SPECIFICATION FOR CRACK REPAIR - CONCRETE

CONSTRUCTION SPECIFICATION FOR CRACK REPAIR - CONCRETE ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 932 MARCH 1998 CONSTRUCTION SPECIFICATION FOR CRACK REPAIR - CONCRETE 932.01 SCOPE 932.02 REFERENCES 932.03 DEFINITIONS TABLE OF CONTENTS 932.04 SUBMISSION

More information

Roofing. Sarnacol Adhesive for Insulation Boards. Product Description. Product Data. Polyurethane-based humidity-hardening one-pack adhesive

Roofing. Sarnacol Adhesive for Insulation Boards. Product Description. Product Data. Polyurethane-based humidity-hardening one-pack adhesive Roofing Product Data Sheet Edition 06.2016 Identification no: 020945072000000006 Version no. 01 Sarnacol 2162 Adhesive for Insulation Boards Roofing Product Description Uses Characteristics / Advantages

More information

Sikadur -31 DW Rapid (VP)

Sikadur -31 DW Rapid (VP) Product Data Sheet Edition 21/05/2015 Identification no: 020204030010000038 Sikadur -31 DW Rapid (VP) 2-part epoxy adhesive tested for drinking water contact Product Description Uses Characteristics /

More information

Construction. SikaProof A. Fully bonded FPO sheet waterproofing membrane system for basement and other below ground structures. Product Description

Construction. SikaProof A. Fully bonded FPO sheet waterproofing membrane system for basement and other below ground structures. Product Description Construction Product Data Sheet Edition 17 April 2012 SikaProof A Fully bonded FPO sheet waterproofing membrane system for basement and other below ground structures Product Description SikaProof A is

More information

PRODUCT DATA SHEET Sikadur -42 HE

PRODUCT DATA SHEET Sikadur -42 HE PRODUCT DATA SHEET 3-PART, HIGH PERFORMANCE EPOXY GROUTING SYSTEM PRODUCT DESCRIPTION is a three-component, high performance, high precision, moisture tolerant, epoxy grouting system. For use at temperatures

More information

Cementitious Concrete Repair Mortar

Cementitious Concrete Repair Mortar Product Data Sheet Edition 08/05/2012 Identification no: 02 03 02 04 005 0 000009 SikaTop -122 Cementitious Concrete Repair Mortar Construction Product Description SikaTop -122 is a two component polymer

More information

Appearance /Colours Resin - part A: transparent, liquid Hardener - part B: transparent, liquid Packaging. Pre-proportioned 5.

Appearance /Colours Resin - part A: transparent, liquid Hardener - part B: transparent, liquid Packaging. Pre-proportioned 5. Product Data Sheet Edition 30/08/2012 Sikafloor -160 2-part solvent free epoxy primer & binder, modular Sikafloor system Construction Product Description Sikafloor -160 is a two part, low viscosity epoxy

More information

Construction. 2-part epoxy impregnation resin. 1 Sikadur /5. Product Data Sheet Edition No. 01 (October 2015) Sikadur -330.

Construction. 2-part epoxy impregnation resin. 1 Sikadur /5. Product Data Sheet Edition No. 01 (October 2015) Sikadur -330. Product Data Sheet Edition No. 01 (October 2015) 2-part epoxy impregnation resin Construction Description Uses Characteristics / Advantages Test Approval / Standards Product Data is a two-part, thixotropic

More information

2 pack Polyurethane grout for rail fixing

2 pack Polyurethane grout for rail fixing Product Data Sheet Edition 11/05/2011 Icosit KC 340/65 2 pack Polyurethane grout for rail fixing Product Description Uses Characteristics / Advantages Icosit KC 340/65 is a flexible two-component polymer

More information

Sikalastic -821 LV is a two part, elastic, crack-bridging, rapid-curing polyurethane membrane. Sikalastic -821 LV is for machine application only.

Sikalastic -821 LV is a two part, elastic, crack-bridging, rapid-curing polyurethane membrane. Sikalastic -821 LV is for machine application only. PRODUCT DATA SHEET Spray applied waterproofing membrane PRODUCT DESCRIPTION Sikalastic -821 LV is a two part, elastic, crack-bridging, rapid-curing polyurethane membrane. Sikalastic -821 LV is for machine

More information

Primer and Moisture Control for Wood Floor Bonding with Elastic SikaBond Adhesives on Difficult Substrates

Primer and Moisture Control for Wood Floor Bonding with Elastic SikaBond Adhesives on Difficult Substrates Construction Product Data Sheet Edition: 29/05/2013 Identification no: Version no: GCC Sika Primer MB+ Sika Primer MB+ Primer and Moisture Control for Wood Floor Bonding with Elastic SikaBond Adhesives

More information

Footfall sound dampening system for wood flooring

Footfall sound dampening system for wood flooring System Product Data Sheet Edition 30/08/2006 Identification no: 02 05 02 03 004 System Footfall sound dampening system for wood flooring Construction System Description Uses Characteristics / Advantages

More information

Construction. Waterstops for joint sealing in watertight concrete structures according to DIN Product Description 1 1/12

Construction. Waterstops for joint sealing in watertight concrete structures according to DIN Product Description 1 1/12 Product Data Sheet Edition 5/1/21 Identification no: 2 7 3 8 Sika Waterbar WT (Template for local translation, only for internal use) Tricosal Waterstops Elastomer Waterstops for joint sealing in watertight

More information

Construction. Adhesive for bonding reinforcement. Product Description. Tests

Construction. Adhesive for bonding reinforcement. Product Description. Tests Product Data Sheet Edition 02/09/2010 Identification no: 02 04 01 04 001 0 000003 Sikadur -30 LP Adhesive for bonding reinforcement Construction Product Description Uses Characteristics / Advantages Sikadur

More information

PRODUCT DATA SHEET Sikafloor -378

PRODUCT DATA SHEET Sikafloor -378 PRODUCT DATA SHEET 2-PART TOUGH-FLEXIBLE COLOURED EPOXY SEAL COAT DESCRIPTION is a two part tough-flexible, coloured,epoxy seal coat with improved resistance against amine blushing under critical weather

More information

Construction. One component cementitious mortar fibre reinforced for flexible waterproofing. Product Description. Product Data. Form.

Construction. One component cementitious mortar fibre reinforced for flexible waterproofing. Product Description. Product Data. Form. Product Data Sheet Edition 12/12/2014 Identification no: 02 07 01 01 001 0 000180 Sikalastic -1K Sikalastic -1K One component cementitious mortar fibre reinforced for flexible waterproofing Construction

More information

Construction. Solvent free elastic adhesive for wood flooring. Product Description

Construction. Solvent free elastic adhesive for wood flooring. Product Description Product Data Sheet Edition 02/09/2010 Identification no: 02 05 02 01 200 0 000001 SikaBond -T52 FC Solvent free elastic adhesive for wood flooring Construction Product Description Uses Characteristics

More information

WATERPROOFING SikaSwell HYDROPHILIC PROFILES AND SEALANTS ACTIVE WATERPROOFING SOLUTIONS FOR CONSTRUCTION JOINTS

WATERPROOFING SikaSwell HYDROPHILIC PROFILES AND SEALANTS ACTIVE WATERPROOFING SOLUTIONS FOR CONSTRUCTION JOINTS SikaSwell HYDROPHILIC PROFILES AND SEALANTS ACTIVE SOLUTIONS FOR CONSTRUCTION JOINTS SikaSwell ACTIVE SYSTEM HYDROPHILIC JOINT SEALING SYSTEMS like SikaSwell profiles and sealants are waterstops which

More information

WATERPROOFING SikaSwell Hydrophilic Profiles and Sealants ACTIVE WATERPROOFING SOLUTIONS FOR CONSTRUCTION JOINTS

WATERPROOFING SikaSwell Hydrophilic Profiles and Sealants ACTIVE WATERPROOFING SOLUTIONS FOR CONSTRUCTION JOINTS SikaSwell Hydrophilic Profiles and Sealants ACTIVE SOLUTIONS FOR CONSTRUCTION JOINTS SikaSwell ACTIVE SYSTEM HYDROPHILIC JOINT SEALING SYSTEMS like SikaSwell profiles and sealants are waterstops which

More information

2-pack Polyurethane grout for rail fixing (continuous undersealing)

2-pack Polyurethane grout for rail fixing (continuous undersealing) Product Data Sheet Edition 09.14 Icosit KC 340/35 Ident No.: E 7351 Icosit KC 340/35 2-pack Polyurethane grout for rail fixing (continuous undersealing) Productdescription Icosit KC 340/35 is a solvent-free

More information

Construction. Solvent free elastic adhesive for wood flooring. Product Description 1 1/6

Construction. Solvent free elastic adhesive for wood flooring. Product Description 1 1/6 Product Data Sheet Edition 23/08/2013 Identification no: 02 05 02 01 200 0 000001 SikaBond -T52 FC Solvent free elastic adhesive for wood flooring Construction Product Description Uses Characteristics

More information

TECHNICAL DATA SHEET SIKABOND-54 WOOD FLOOR 6KG (3pack=18KG)

TECHNICAL DATA SHEET SIKABOND-54 WOOD FLOOR 6KG (3pack=18KG) TECHNICAL DATA SHEET SIKABOND-54 WOOD FLOOR 6KG (3pack=18KG) SikaBond-54 Wood Floor is a professional wood floor adhesive that is fast curing, solvent-free and elastic. For full stick bonding of both solid

More information

METHOD STATEMENT Sika Drain-850 Geo

METHOD STATEMENT Sika Drain-850 Geo METHOD STATEMENT 3/6/2016 / 1 / SIKA LTD, / ALEX BURMAN WATERPROOFING TABLE OF CONTENTS 1 Scope 3 2 System Description 3 2.1 Uses 3 2.2 Characteristics / Advantages 3 2.3 References 3 2.4 Limitations 3

More information

TECHNICAL DATA SHEET SIKABOND AT METAL GREY 300CC

TECHNICAL DATA SHEET SIKABOND AT METAL GREY 300CC TECHNICAL DATA SHEET SIKABOND AT METAL GREY 300CC SikaBond AT Metal is based on a new type of hybrid polymer. AT (Advanced Technology) is a combination of the powerful Sika polyurethane (PU) and modified

More information

FIVE STAR PRODUCTS, INC. (800)

FIVE STAR PRODUCTS, INC.  (800) FIVE STAR PRODUCTS, INC. www.fivestarproducts.com (800) 243-2206 Page 1 of 11 DESIGN-A-SPEC GUIDELINES FIVE STAR RS ANCHOR GEL CONTENTS PART A - GENERAL CONDITIONS PART B - MATERIAL SPECIFICATIONS PART

More information

2-part PUR tough-elastic coloured seal coat

2-part PUR tough-elastic coloured seal coat Product Data Sheet Edition 22/02/2012 Identification no: 02 08 01 04 025 0 000001 Sikafloor -359 N 2-part PUR tough-elastic coloured seal coat Construction Product Description Sikafloor -359 N is a two

More information