It s not magic, it s engineering. Impact and Airborne Sound Control. GenieClip. US Patent No. 7,895,803
|
|
- Natalie Small
- 6 years ago
- Views:
Transcription
1 It s not magic, it s engineering. Impact and Airborne Sound Control GenieClip US Patent No. 7,895,803
2 GenieClip An innovative, and reliable sound solution Engineered for superior acoustical performance in reducing the transmission of airborne and impact sound through wall and floor/ceiling assemblies. The GenieClip is a unibody molded rubber and galvanized steel mount used to attach Gypsum Wallboard (GWB) to either wall or floor/ceiling assemblies. Made from recycled components, and engineered to allow reduction in assembly weight, the GenieClip contributes to LEED certified building. For downloads, visit pliteq.com Here s what s available on our website: Over 60 UL certified Assemblies Over 150 independent laboratory and field test reports Installation instructions Complete laboratory test reports and field data Technical papers Performance comparisons Cost analysis Case studies Private website for engineers LEED information and carbon footprint analysis Technical binder request Local Sales support in U.S., U.K., Canada, Middle East and Southeast Asia ABOUT US Pliteq is an engineering company dedicated to providing creative solutions to structural, vibration, and sound control problems using recycled materials. Using elastomer technology and intellectual property, high performance solutions are researched, developed and rigorously tested for the engineer. It s not magic, it s engineering. 2 PLITEQ
3 Engineered to work The GenieClip is easy and fast to install using standard steel furring channel and is extremely stable when held in place with a single fastener. There is nothing to adjust or site fit. The furring channel is simply snapped into the GenieClip and the Gypsum Wallboard (GWB) can be immediately installed. Only one screw required to attach metal clip to wood or metal wall studs or floor joists Engage standard 25 gauge drywall furring channel into either claw, then squeeze channel to engage the claw Engineered to be foolproof VS. 1 5/8" Resilient Channel Resilient channel is commonly short circuited Resilient Channel Crushed GenieClip GenieClip is impossible to short circuit Engineered to improve transmission loss Low Frequency Performance Wood Truss Comparison 1 layer of GWB on each side GENIECLIP 3
4 Floor-Ceiling Assemblies open-web wood trusses Wood Truss with GenieClip and Gypsum Concrete 1/2" 1/16" (no underlayment) 3/4" Gypsum Concrete 3/4" O.S.B. 3 1/2" Batt Insulation " 18" Open-Web Wood Truss 7/8" Furring Channel (1) Layer of 5/8" Type C Gypsum Wall Board " OC max d c b g UL Assembly Assembly Assembly L521, L528, etc. Solid Wood Joist with GenieClip and NO Gypsum Concrete 13 1/8" 1/2" 1/16" 15/32" Plywood 19/32" Plywood 3 1/2" Batt Insulation 2 x 10 Solid Wood Joist 7/8" Furring Channel (1) Layer of 1/2" Type C Gypsum Wall Board " OC max UL Assembly Assembly Assembly L502, L505, L513, L514, L590, etc PLITEQ
5 Floor-Ceiling Assemblies engineered joists TJI Floor Joist with GenieClip and Gypsum Concrete 1/2" Wood 1/2" 1/16" 3/4" Gypsum Concrete 3/4" Plywood 3 1/2" Batt Insulation " 12" TJI Floor Joist 7/8" Furring Channel (2) Layers of 1/2" Type C Gypsum Wall Board 48" OC max c h Wood Assembly c j c i UL Assembly Assembly Assembly L518, L547, L570, L589, etc. TJI Floor Joist with GenieClip and NO Gypsum Concrete 1/2" Wood 1/2" 1/16" 1/16" (no underlayment) (2) Layers of 3/4" O.S.B. 3 1/2" Batt Insulation " 12" TJI Floor Joist 7/8" Furring Channel (2) Layers of 1/2" Type C Gypsum Wall Board " OC max a c a e a b, 1d UL Assembly Wood Assembly Assembly Assembly L518, L547, L570, L589, etc. GENIECLIP 5
6 Floor-Ceiling Assemblies concrete slabs GenieClip with ceiling level adjustment Pliteq has several standard ceiling suspension accessories and our engineers design custom applications with ceiling level adjustment composite floor systems Hambro D500 With 4" Normal Weight Concrete and GenieClip 6 PLITEQ
7 GenieClip Type LB Designed for high load capacity applications by utilizing 14 Ga. steel and a unibody design Dynamic applications including wall bracing, cabinet mounting, wire suspended ceiling isolation, bulk-head mounting etc. Isolated wire suspended ceilings 24" max (or as specified) 48" max OC 48" max OC FRONT VIEW Concrete Floor Slab 48" max OC GenieClip Type LB 12Ga Wire Hanger Batt Insulation 48" max OC Drywall Grid Drywall Board PROFILE VIEW PLAN VIEW Main Tee: North-South Cross Tee: East-West Isolated Framing for Bulkhead Mounting 24" max OC Floor Joist 3/4" min. GenieClip Type LB Acoustical Sealant 1/4" Isolated Framing Drywall Board Ductwork (suspend as specified) 3/4" min. GENIECLIP 7
8 Wall Assemblies metal stud GenieClip with 2 layers GenieClip with 3 layers GenieClip with 4 layers wood stud GenieClip with 2 layers GenieClip with 3 layers GenieClip with 4 layers 8 PLITEQ
9 Wall Assemblies engineered partitions SAVE MATERIAL NEW WAY with GenieClip OLD WAY with 4 layers Eliminate 2 layers of gypsum wallboard to: Achieve 7dB improvement Reduce amount of construction materials SAVE SPACE NEW WAY with GenieClip OLD WAY with Staggered or Double Studs (metal or wood) Eliminate 1 row of framing and insulation to: Achieve similar acoustical performance Reduce partition thickness by 2 3/8" Increase valuable floor space Avoid ineffective staggered stud assemblies GENIECLIP 9
10 Retrofit Assemblies GenieClip Benefits Increase by 8-12 db in floor ceiling retrofit assemblies Increase by db in wall retrofit assemblies Retrofit directly to existing ceiling or wall Greater than other popular retrofit solutions Floor-Ceiling Assembly Wall Assembly NOTE: Resilient channel failure is a common observation by Acoustical Engineers. Short circuited resilient channel results in up to a 10 point reduction. LoVerde, J., & Dong, W. (2009). Quantitative comparisons of resilient channel designs and installation methods. The GenieClip is proven to: Meet building codes for fire and sound Prevent costly litigation and reconstruction IMPORTANCE OF ENGINEERED ELASTOMER Isolation Clip Durometer Dynamic Stiffness * GenieClip N/mm 57 Isomax N/mm 57** RSIC N/mm 56 RSIC-V No Rubber No Rubber 52 * 2x4 Wood stud 16" OC, 1 layer of 5/8" Type X GWB on each side with 3.5" Insulation ** Test conducted with 5.5" Insulation 10 PLITEQ
11 Test Results *Complete laboratory reports available. FLOOR-CEILING ASSEMBLIES Test No. Floor Structure Finish Floor Resilient Matting d c f e b g h i e f c d u v o p a c a e a d a b c g c i c h c j 24 o.c., ¾ gypsum 24 o.c., ¾ gypsum 24 o.c., ¾ gypsum 24 o.c., ¾ gypsum 24 o.c., No gypsum 24 o.c., No gypsum 24 o.c., No gypsum 24 o.c., No gypsum 2 x 19/32 OSB 2 x 19/32 OSB 2 x 19/32 OSB 2x 19/32 OSB ¾ gypsum ¾ gypsum 12 TJI, 24 o.c. ¾ gypsum ¾ gypsum Carpet Wood Wood None None None None None Ceiling Description (1) 5/8 Type C GWB (2) 5/8 Type C GWB (1) 5/8 Type C GWB (2) 5/8 Type C GWB (1) 5/8 Type C GWB (2) 5/8 Type C GWB (2) 5/8 Type C GWB (2) 5/8 Type C GWB c k ¾ gypsum Resilient Channel x 10 Solid Joist 2 x 5/8 plywood (1) ½ Type C GWB x 10 Solid Joist 2 x 5/8 plywood RC-Deluxe (1) ½ Type C GWB x 10 Solid Joist 2 x 5/8 plywood RC-Deluxe w/ short circuiting (1) ½ Type C GWB x 10 Solid Joist 2 x 5/8 plywood Pliteq GenieClip Retrofit ceiling (1) ½ Type C GWB x 10 Solid Joist 2 x 5/8 plywood Plank (1) ½ Type C GWB Concrete Slab None None GenieClip Type LB (1) ½ Type C GWB concrete slab None Dietrich RC-1, (1) 5/8 Type X GWB concrete slab RST05 (1) 5/8 Type X GWB Hambro D500 with 4 normal weight concrete (1) ½ Type X GWB GENIECLIP 11
12 *Complete laboratory reports available. WALL ASSEMBLIES Test No. Wall Stud Structure GWB Layers Steel Framing Member Hz Hz Metal 20 Ga., 3 5/8" width spaced 24 o.c. 5/8" Type X Product Type db db db Metal 1 1 None Metal 1 1 GenieClip Metal 1 1 RC-Deluxe Metal 1 1 RSIC Metal 1 1 RSIC-V Metal 2 1 None Metal 2 1 RC-Deluxe Metal 2 1 GenieClip Metal 2 1 RSIC Metal 2 1 RSIC-V Metal 2 2 None Metal 2 2 RC-Deluxe Metal 2 2 GenieClip Metal 2 2 RSIC Metal 2 2 RSIC-V Metal GenieClip Metal GenieClip Metal GenieClip Wood 2 4 spaced 16" o.c. 5/8" Type X Product Type db db db Wood 1 1 GenieClip Wood 1 1 None Wood 1 1 RC-Deluxe Wood 1 1 RSIC Wood 1 1 RSIC-V Wood 2 1 GenieClip Wood 2 1 None Wood 2 1 RC-Deluxe Wood 2 1 RSIC Wood 2 1 RSIC-V Wood 2 2 GenieClip Wood 2 2 None Wood 2 2 RC-Deluxe Wood 2 2 RSIC Wood 2 2 RSIC-V Wood 1 1 None Wood layer GenieClip Wood layers GenieClip Double Stud 1x1 None Staggered Stud 2x2 None Contact us For more information: Pliteq Inc Don Mills Road, Unit 300, Toronto, ON M3B 3N7 Tel Fax Or contact your local representative. The information provided in this brochure is accurate to the best of our knowledge at the time of printing. However, we reserve the right to make changes when necessary without notification. PRINTED IN 2014
13 Marino\WARE New Jersey Plant 400 Metuchen Rd. South Plainfield, NJ P: F: Marino\WARE Georgia Plant 777 Greenbelt Pkwy. Griffin, GA P: F: Marino\WARE Indiana Plant 4245 Railroad Ave. East Chicago, IN P: F: Marino\WARE Texas Plant Bay Area Blvd. Pasadena, TX P: F: Marino\WARE New York Sales Office 137 Broadway, Ste. B1 Amityville, NY P: F: Marino\WARE Engineering Office 200 Business Center Drive Stockbridge, GA P: F:
GenieClip. Sound Isolation Clips. It s not magic, it s engineering. Impact and Airborne Sound Control
It s not magic, it s engineering. Impact and Airborne Sound Control GenieClip Sound Isolation Clips Patents: US 7895803, US 9121469, CA 2552516, AU 2007276677, CN 1011919, EPO Patent Pending GenieClip
More informationIt s not magic, it s engineering. Impact and Airborne Sound Control. GenieClip. US Patent No. 7,895,803 U.K. VERSION
It s not magic, it s engineering. Impact and Airborne Sound Control US Patent No. 7,895,803 U.K. VESION An innovative, and reliable sound solution Engineered for superior acoustical performance in reducing
More informationRETHINK METAL FRAMING
RETHINK METAL FRAMING StudRite FrameRite connectors FASTrack QuickFrame JoistRite GenieClip RETHINK WALL FRAMING StudRite weighs less than traditional studs making it easier to handle. The unique design
More informationGenieMat FF. Floating Floor Systems for Airborne & Impact Sound and Vibration Isolation. It s not magic, it s engineering. Impact Sound Control
It s not magic, it s engineering. Impact Sound Control GenieMat FF Floating Floor Systems for Airborne & Impact Sound and Vibration Isolation Patents: US 8240430, US8556029, CA 2500956, CA 2503420 GenieMat
More informationRSIC-1 THE REVOLUTION IN NOISE CONTROL
RSIC-1 THE REVOLUTION IN NOISE CONTROL CHECK OUR WEBSITE FOR THE NEWEST INFORMATION AND ADDITIONS TO OUR PRODUCT LINE VER 0604 OVER 150 DESIGNS WE DON T BUILD BUILDINGS - WE MAKE THEM QUIET RSIC-1 wall
More informationPliteq Inc. - LEED Summary
Pliteq Inc. - LEED Summary At Pliteq, we re committed to serving the health and safety of both our environment and our community. Pliteq is an engineering company dedicated to providing creative solutions
More informationRSIC THE REVOLUTION IN NOISE CONTROL
RSIC THE REVOLUTION IN NOISE CONTROL CHECK OUR WEBSITE FOR THE NEWEST INFORMATION AND ADDITIONS TO OUR PRODUCT LINE VER 01-15 OVER 150 OPTIONS WE DON T BUILD BUILDINGS - WE MAKE THEM QUIET THE RSIC-1 SOUND
More informationRESILIENT SOUND ISOLATION CLIPS
RESILIENT SOUND ISOLATION CLIPS For Wall & Floor Ceiling Assemblies RSIC-1 Resilient Sound Isolation Clip Isolation Clip RSIC-1 Isolation Clip Soundproofing Products SonexTM Ceiling & Wall Panels Sound
More informationRSIC-V. Acoustical Surfaces, Inc. RSIC-V Sound Isolation Clip RSIC V INSTALLATION GUIDE. We Identify and S.T.O.P. Your Noise Problem
A Master Distributor for PAC INTERNATIONAL, INC. RSIC V INSTALLATION GUIDE RSIC-V Page 1 Furring Channel: Minimum requirements: 25 gauge, hemmed edge detail required on all 25 gauge furring channel. Meets
More informationSHAFTWALL AND AREA SEPARATION WALL SYSTEMS
SHAFTWALL AND AREA SEPARATION WALL SYSTEMS PRODUCT CATALOG THE BEST PRODUCTS, QUALITY, AND CUSTOMER SERVICE. Our large inventory of both finished products and coil steel allow us to readily satisfy your
More informationInstallation. Resilmount A237R. Installation Instructions. Furring channel sound isolation clip
Resilmount A237R Furring channel sound isolation clip Installation Instructions Another Quality Building Product Installation A237R SPECIFICATIONS Width: 1-3/8 eight (including rubber): 1-1/16 Length:
More informationInstallation Guide and Safety Manual Resilient Sound Isolation Clips (SIC Clips)
Installation Guide and Safety Manual Resilient Sound Isolation Clips (SIC Clips) SOUND ISOLATION CLIP SPECIFICATIONS Width...1.00 inch Height...1.06 inch Length...3.86 inch Weight....025 lbs Max Spacing...48
More informationInstruction and Safety Manual Resilient Sound Isolation Clips (SIC Clips)
SOUND ISOLATION CLIPS Installation Manual Instruction and Safety Manual Resilient Sound Isolation Clips (SIC Clips) SOUND ISOLATION CLIP SPECIFICATIONS Width...1.00 inch Height...1.06 inch Length...3.86
More informationLISTING INFORMATION OF International Beams - IB Series Joists SPEC ID: 27316
LISTING INFORMATION OF International Beams - IB Series Joists SPEC ID: 27316 International Beams Inc. 2010 Boul. St-Elzear Quest Laval, QC H7L 3N4 CANADA This report is for the exclusive use of Intertek
More informationInstallation Guide and Safety Manual Resilmount A237R (Resilient Sound Isolation Clips)
Installation Guide and Safety Manual Resilmount A237R (Resilient Sound Isolation Clips) 3" RESILMOUNT A237R SPECIFICATIONS 1d " f" Width...1.375 inch Height...3.25 inch Depth...1.125 inch Weight....025
More informationSHAFTWALL & AREA SEPARATION WALL SYSTEMS PRODUCT CATALOG
SHAFTWALL & AREA SEPARATION WALL SYSTEMS PRODUCT CATALOG 100% American-Owned and Operated marinoware.com THE BEST PRODUCTS, QUALITY, AND CUSTOMER SERVICE. Our large inventory of both finished products
More informationARCHITECTURAL AND STRUCTURAL NOISE CONTROL SOLUTIONS
13080/KIN BuyLine 1062 Providing solutions to common noise and vibration problems since 1958. ARCHITECTURAL AND STRUCTURAL NOISE CONTROL SOLUTIONS IIC 51 STC 72 FLOOR/CEILING STC 84 IIC 70 FLOOR/CEILING
More informationInstallation Guide and Safety Manual QuietClip (Resilient Sound Isolation Clips)
Installation Guide and Safety Manual QuietClip (Resilient Sound Isolation Clips) 1d" 2 2" 1 4" f" QUIETCLIP SPECIFICATIONS Width...1.25 inch Height...4.25 inch Depth...1 inch Weight....025 lbs Max Spacing...48
More informationTo damp 5/8" drywall (to be the other half of a sandwich featuring 5/8" drywall)
Using Green Glue Getting the most out of your Green Glue walls In this document we will take a look at how to best utilize Green Glue in walls, floors, and ceilings. We will cover the times when Green
More informationSoundproofing of Wood-frame buildings
Soundproofing of Wood-frame buildings Learning objectives Basic Acoustic Principles and Definitions Impact and Airborne sounds in light wood-frame buildings Means of soundproofing light wood-frame buildings
More informationAND ACCESSORIES FOR DRYWALL CONSTRUCTION
STEEL TRIMS AND ACCESSORIES FOR DRYWALL CONSTRUCTION Quality in your corner. THE STRENGTH WITHIN MONTREAL TORONTO CALGARY EDMONTON VANCOUVER STEEL TRIMS AND ACCESSORIES for Construction BAILEY HAS YOUR
More informationInstallation Guide and Safety Manual
Installation Guide and Safety Manual Resilmount A237R (Resilient Sound Isolation Clips) REQUIRED FURRING CHANNEL REQUIRED FURRING CHANNEL* 1 4" 2 2" Minimum f" Gauge:...25 Gauge With Hemmed Edge (Do Not
More informationLaboratory Data Examining Impact and Airborne Sound Attenuation in Cross- Laminated Timber Panel Construction - Part 2
Laboratory Data Examining Impact and Airborne Sound Attenuation in Cross- Laminated Timber Panel Construction - Part 2 Matthew GOLDEN 1 ; Wilson BYRICK 2 1,2 Pliteq Inc., Canada ABSTRACT At INTER-NOISE
More informationFIRE & SOUND MANUAL ARCHITECT VERSION 4.18
4.18 FIRE & SOUND MANUAL ARCHITECT VERSION NOTE REGARDING CANADIAN PROJECTS: Canada accepts all UL Fire Designs listed in this manual. For additional information on Canadian Fire Designs, refer to page
More informationSound Attenuation. Slide 1 of 48. PAC International Inc START
Sound Attenuation START www.pac-intl.com Slide 1 of 48 Sound Attenuation PAC International 7310 Smoke Ranch Rd Suite "E" Las Vegas, NV. 89128 Course Number: XXXXXX Learning Units: 1.00 PAC International
More informationFIRE & SOUND MANUAL ARCHITECT VERSION 4.16
4.16 FIRE & SOUND MANUAL ARCHITECT VERSION NOTE REGARDING CANADIAN PROJECTS: Canada accepts all UL Fire Designs listed in this manual. For additional information on Canadian Fire Designs, refer to page
More informationWhen demanding consistent quality, specify FIRM-FILL SCM-250 to assist in achieving highly improved IIC sound performance in multifamily
When demanding consistent quality, specify FILL to assist in achieving highly improved sound performance in multifamily construction. FILL is an integral component of a well designed floor/ ceiling assembly.
More informationThis page was. intentionally. left blank
CONSTRUCTION Measurement of Airborne Sound Insulation of 8 Wall Assemblies Measurement of Airborne and Impact Sound Insulation of 29 Floor Assemblies Nordic Engineered Wood Report No. A1-006070.10 July
More informationFIRE & SOUND MANUAL ARCHITECT VERSION 6.17
6.17 FIRE & SOUND MANUAL ARCHITECT VERSION NOTE REGARDING CANADIAN PROJECTS: Canada accepts all UL Fire Designs listed in this manual. For additional information on Canadian Fire Designs, refer to page
More informationShaftwall and Area Separation Wall Systems.
Shaftwall and Area Separation Wall Systems www.marinoware.com Marino\WARE S Fire Rated Wall Systems Quality that takes you to the top. Marino\WARE created its CT Shaftwall System, to be a flexible shaftwall
More informationFIRM-FILL SCM-400 can be installed under a FIRM-FILL Gypsum Concrete Floor Underlayment to produce an exceptional vibration isolation floor system.
Specify FILL SCM-400 for additional impact noise control when a thicker sound mat is needed. It helps achieve higher delta numbers than thinner mats. FILL SCM-400 is a cost-effective way to address Impact
More informationDIRECT FIX TO STEEL STUD Toll Free (866) RAL Assembly STC 58
WALL ASSEMBLY DIRECT FIX TO STEEL STUD Toll Free (866) 774-2100 WWW.PAC-INTL.COM RAL 05-013 Assembly STC 58 58 STC RAL 05-013 STC CONSTRUCTION * 1 layer 5/8" Gypsum * 3-5/8" Steel Stud at 24" oc. * R-19
More informationRSIC ACOUSTIC ASSEMBLY
RSIC ACOUSTIC ASSEMBLY FLOOR CEILING ASSEMBLY DIRECT FIX TO SOLID WOOD JOIST FCWT RAL IN08-016 CONSTRUCTION Sheet Vinyl 1/2 Wood Underlayment 5/8 Plywood Subfloor (*L513 3/4 Ply) 2" X 10" Solid Wood Joist
More informationREPORT 3933 US ROUTE 11 CORTLAND, NEW YORK Order No October 15, REPORT NO CRT-002d3
REPORT ACCREDITATION UNDER NVLAP 3933 US ROUTE 11 CORTLAND, NEW YORK 13045 Order No. 3166866 October 15, 2013 REPORT NO. 3166866CRT-002d3 IMPACT SOUND TRANSMISSION TEST AND CLASSIFICATION OF LAMINATE FLOORING
More informationProduct Guide Specification
PAC International, Inc. January 2004 PO Box 5369 Aloha, Oregon 97006 Toll Free (866) RSIC-100 (866) 774-2100 PAC Phone (503) 649-7700 Fax (503) 649-2710 INTERNATIONAL Inc. Web Site www.pac-intl.com E-Mail
More informationSECTION SOUND ISOLATION
SECTION 13085 SOUND ISOLATION PART 1 GENERAL 1.1 SECTION INCLUDES A. Resilient sound isolation clips installed with drywall furring channels for support of gypsum board for noise control (de-coupling)
More informationRSIC-1 ACOUSTIC ASSEMBLY
RSIC-1 ACOUSTIC ASSEMBLY FLOOR/CEILING ASSEMBLY DIRECT FIX TO CONCRETE SLAB FCS5 DSWA FIIC 72 CONSTRUCTION * 3/8" Hard Wood flooring * 8" PT concrete slab Fire resistance ratings * R-8 insulation ANS/UL
More informationPROVEN, RELIABLE SOUND CONTROL COST EFFECTIVE SOLUTION FOR WALLS/CEILINGS MULTI-FAMILY, SINGLE FAMILY, HOME THEATER
SOUND ISOLATION SOLUTIONS PROVEN, RELIABLE SOUND CONTROL COST EFFECTIVE SOLUTION FOR WALLS/CEILINGS MULTI-FAMILY, SINGLE FAMILY, HOME THEATER Model A237R Thermoplastic rubber with no metal washer or ferrule;
More informationProduct Guide Specification
PAC International, Inc. December 2007 Las Vegas, NV 89128 Toll Free (866) RSIC-100 (866) 774-2100 Fax (866) 649-2710 Web Site www.pac-intl.com E-Mail info@pac-intl.com Product Guide Specification Specifier
More informationRSIC-1-INSTALALTION GUIDE RSIC-1 SOUND ISOLATION CLIP
RSIC-1 Drywall Furring Channel: Minimum Requirements: 25 gauge, hemmed edge detail required on all 25 gauge furring channel. Meets or exceeds SFIA requirements. Depth: 7/8 inch Width Bottom: 2-9/16 to
More informationPATENT PENDING DRYWALL SYSTEM TECHNICAL PRODUCT GUIDE
PATENT PENDING DRYWALL SYSTEM TECHNICAL PRODUCT GUIDE THE STRONGER FLAT DRYWALL STUD Finally, a stronger steel drywall framing stud and track, without all the speed bumps. It s unique ability to outperform
More informationHACKER SOUND MAT II, to create a quieter living environment while meeting demanding project specifications in multi-family construction.
HACKER SOUND MAT II HACKER SOUND MAT II, to create a quieter living environment while meeting demanding project specifications in multi-family construction. HACKER SOUND MAT II, a recycled rubber sound
More informationLISTING INFORMATION OF Weyerhaeuser - TJI Joists SPEC ID: 26948
LISTING INFORMATION OF Weyerhaeuser - TJI Joists SPEC ID: 26948 Weyerhaeuser NR Company 33663 Weyerhaeuser Way S PO Box 9777, WTC 1K5 Federal Way, WA 98063 This report is for the exclusive use of Intertek
More informationPROVEN, RELIABLE SOUND CONTROL COST EFFECTIVE SOLUTION FOR WALLS/CEILINGS MULTI-FAMILY, SINGLE FAMILY, HOME THEATER
SOUND ISOLATION SOLUTIONS PROVEN, RELIABLE SOUND CONTROL COST EFFECTIVE SOLUTION FOR WALLS/CEILINGS MULTI-FAMILY, SINGLE FAMILY, HOME THEATER Model A237R Thermoplastic rubber with no metal washer or ferrule;
More informationRSIC-1 ACOUSTIC ASSEMBLY
RSIC-1 ACOUSTIC ASSEMBLY FLOOR/CEILING ASSEMBLY DIRECT FIX TO CONCRETE SLAB FCS3 DSWA FIIC 69 PAC INTERNATIONAL Inc. Toll Free 866-774-2100 Telephone 503-649-7700 CONSTRUCTION * Ceramic Tile * 1/4" James
More informationStark Truss Company, Inc. Revised December 14, 2018
Fire-Rated Assemblies PR-S223 Stark Truss Company, Inc. Revised December 14, 2018 Products: SI-40, SI-60, and SI-80 Prefabricated Wood I-Joists Stark Truss Company, Inc. 8655 Chestnut Ridge Road, N.W.
More informationRSIC-1. RSIC-1, the Low Cost, High Performance, Noise control Solution. RSIC-1 specifications:
RSIC-1 The RSIC-1 is designed for use with any wood framed, steel framed, CMU, or concrete wall and ceiling system where noise control is needed. The RSIC-1 assembly decouples and isolates the gypsum board
More informationSECTION GYPSUM BOARD
SECTION 09250 GYPSUM BOARD PART 1GENERAL 1.1 SUMMARY A. Related Documents: General and Supplementary Conditions of the Contract, Division 1 - General Requirements, and Drawings are collectively applicable
More informationFLOOR CEILING ASSEMBLY
FLOOR CEILING ASSEMBLY DIRECT FIX TO SOLID WOOD JOIST FCWT RAL IN09-012 Toll Free (866) 774-2100 WWW.PAC-INTL.COM Fire Resistance Ratings CONSTRUCTION 3/8" HARDWOOD FLOORING VAPOR BARRIER 3/4 LT WT CONCRETE
More informationAcoustical Engineering Solutions.
Acoustical Engineering Solutions. Meeting IBC Acoustical Requirements for Multifamily Construction By Scott Harvey, PE, INCE Bd. Cert. Phoenix Noise & Vibration Frederick, Maryland Copyright Materials
More informationRSIC ACOUSTIC ASSEMBLY
RSIC ACOUSTIC ASSEMBLY FLOOR CEILING ASSEMBLY DIRECT FIX TO WOOD OPEN WEB TRUSS TFCSW RAL IN09-044 STC 54 IIC 52 CONSTRUCTION Hardwood Flooring 1/16" Foam Underlayment 3/4 T&G OSB Subfloor 11-1/4" Deep
More informationRSIC-V RSIC-V INSTALLATION GUIDE RSIC-V SOUND ISOLATION CLIP
RSIC-V INSTALLATION GUIDE RSIC-V PAC International, Inc. Tel: (866) 774-2100 Fax: (866) 649-2710 Web Site: www.pac-intl.com Furring Channel: Minimum requirements: 25 gauge, hemmed edge detail required
More informationQuantitative comparisons of resilient channel design and installation in single wood stud walls
Proceedings of 20 th International Congress on Acoustics, ICA 2010 23-27 August 2010, Sydney, Australia Quantitative comparisons of resilient channel design and installation in single wood stud walls John
More informationEDGEWATER, FLORIDA JUNE 14, 2010
SECTION 09 2900 - GYPSUM BOARD PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationFloor SoundprooFIng Made Simple
Floor SoundprooFIng Made Simple THE PERFECT SOLUTION FOR Luxury RENOVATION PROJECTS Any Finished Floor Double Plywood Floated Subfloor Original Subfloor Insulation Wood Joists Any Finished Floor Double
More informationDIVISION: FINISHES SECTION: ACOUSTIC TREATMENT REPORT HOLDER: HOMASOTE COMPANY
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1374 Reissued 06/2017 This report is subject to renewal 06/2018. DIVISION: 09 00
More informationFIRE & SOUND IN MULTIFAMILY FLOORS DESIGN CONSIDERATIONS
USG Tile & Flooring Solutions FIRE & SOUND IN MULTIFAMILY FLOORS DESIGN CONSIDERATIONS TABLE OF CONTENTS INTRO... 2 UL DESIGN OVERVIEW... 3 UL DESIGN FLOORING SYSTEM OPTIONS... 4-5 SOUND ATTENUATION...
More informationRSIC-1 SOUND ISOLATION SYSTEMS RSIC-1 INSTALLATION GUIDE
RSIC-1 INSTALLATION GUIDE PAC International, Inc. Tel: (866) 774-2100 Technical: (866) 649-2710 Web Site: www.pac-intl.com RSIC is a registered Trade Mark of PAC International, Inc. Page 1 Drywall Furring
More informationRSIC ACOUSTIC ASSEMBLY
RSIC ACOUSTIC ASSEMBLY FLOOR CEILING ASSEMBLY World Leader in Noise Control Solutions DIRECT FIX TO WOOD OPEN WEB TRUSS F4545.07 STC 61 IIC 54 CONSTRUCTION Hacker Industries, Inc. Firm-Fill Gypsum Concrete
More informationCopyright 2018 American Wood Council 1
for Wood Frame Assemblies BCD800 Jason Smart, P.E. Manager, Engineering Technology American Wood Council The American Wood Council is a Registered Provider with The American Institute of Architects Continuing
More informationKINETICS NOISE CONTROL TEST REPORT #AT001073
KINETICS NOISE CONTROL TEST REPORT #AT001073 KINETICS NOISE CONTROL PRODUCTS: o ISOMAX CLIPS ACOUSTICAL RATINGS: o STC 63 TESTING AGENCY & REPORT NUMBER: o RIVERBANK ACOUSTICAL LABORATORIES o RAL TL06-048
More informationLISTING INFORMATION OF Mitek Design No. MCI/WI SPEC ID: MiTek Canada, Inc. 100 Industrial Road Bradford, ON L3Z 3G7 Canada
LISTING INFORMATION OF Mitek Design No. MCI/WI 60-02 SPEC ID: 27680 MiTek Canada, Inc. 100 Industrial Road Bradford, ON L3Z 3G7 Canada This report is for the exclusive use of Intertek s Client and is provided
More informationIntertek Testing Services
Acoustical 3933 U.S. Rt. Cortland, NY 13045 Phone: 607-753-6711 Fax: 607-756-9891 Order No. J99031102-003 December 10, 1999 REPORT NO. J99031102-003 SOUND TRANSMISSION LOSS TEST AND CLASSIFICATION OF A
More informationSTEEL STUD, TRIMS AND ACCESSORIES FOR DRYWALL CONSTRUCTION MONTREAL TORONTO CALGARY EDMONTON VANCOUVER THE STRENGTH WITHIN
STEEL STUD, TRIMS AND ACCESSORIES FOR DRYWALL CONSTRUCTION MONTREAL TORONTO CALGARY EDMONTON VANCOUVER THE STRENGTH WITHIN STEEL STUD AND TRACK FOR DRYWALL PARTITIONS TAKE ADVANTAGE OF THE SAVINGS IN TIME
More informationSolve your noise problem. Call now to get it right the first time
A revolutionary version of MLV that is tear resistant, more durable, and readily available. Reinforced fabric facing on one side makes installation faster and easier- saving money! Suitable for installation
More informationRSIC-V INSTALLATION GUIDE RSIC-V SOUND ISOLATION CLIP. PAC International, Inc. Tel: (866) Fax: (866) Web Site:
RSIC-V INSTALLATION GUIDE RSIC-V Furring Channel: Minimum requirements: 25 gauge, hemmed edge detail required on all 25 gauge furring channel. Meets or exceeds SFIA min. requirements. (25 Ga furring channel
More informationC R0 ACOUSTICAL PERFORMANCE TEST REPORT ASTM E 90 AND ASTM E 492. Rendered to. ECORE International. Series/Model: Forest rx
ACOUSTICAL PERFORMANCE TEST REPORT ASTM E 90 AND ASTM E 492 Rendered to Series/Model: Forest rx Specimen Type: Floor/Ceiling Assembly Overall Size: 3023 mm by 3632 mm Summary of Test Results Data File
More informationProject No: Pakenham Branch Library, Pakenham, Ontario Section DECEMBER, 2016 Page 1 of 6
DECEMBER, 2016 Page 1 of 6 1 GENERAL 1.01 RELATED SECTIONS.1 Section 01 33 00 - Submittal Procedures..2 Section 07 21 16 - Batt and Blanket Insulation..3 Section 07 92 10 - Sealants..4 Section 09 91 00
More informationFlanking Transmission at Joints in Multi-Family Dwellings. Phase 1: Effects of Fire Stops at Floor/Wall Intersections
Flanking Transmission at Joints in Multi-Family Dwellings. Phase 1: Effects of Fire Stops at Floor/Wall Intersections Nightingale, T.R.T. and Halliwell, R.E. IRC-IR-754 www.nrc.ca/irc/ircpubs Flanking
More informationA. AISI Specifications for Design of Cold-Formed Steel Structural Members
Section 13 48 00: Sound, Vibration, and Seismic Control PART 1: GENERAL 1.1 SECTION INCLUDES A. SonusClip resilient sound isolation clips installed with drywall furring channel for support of gypsum board
More informationSound Control Solutions in Floor/Ceiling Assemblies
Sound Control Solutions in Floor/Ceiling Assemblies Controlling sound becomes more important every day. At SAMfloors, it is our mission to provide elegant, functional sound control solutions to meet the
More informationRSIC ACOUSTIC ASSEMBLY
RSIC ACOUSTIC ASSEMBLY FLOOR CEILING ASSEMBLY DIRECT FIX TO WOOD OPEN WEB TRUSS TFCSW RAL IN09-045 STC 56 IIC 73 CONSTRUCTION Carpet and Pad 3/4 T&G OSB Subfloor 11-1/4" Deep Open Web Truss @ 24" OC R-11
More informationPinkWood Ltd. Revised September 29, 2017
Fire-Rated Assemblies PR-S315 PinkWood Ltd. Revised September 29, 2017 Products: Series I-Joists PinkWood Ltd., 5929 6 th St. NE, Calgary, Alberta, Canada T2K 5R5 (403) 279-3700 www.pinkwood.ca 1. Basis
More informationPage 2 of 5 1. Flooring Systems The flooring system shall consist of one of the following: System No. 1 Subflooring Nom 23/32 in. thick wood structura
Page 1 of 5 Page Bottom Design No. L577 BXUV.L577 Fire-resistance Ratings - ANSI/UL 263 Design/System/Construction/Assembly Usage Disclaimer Authorities Having Jurisdiction should be consulted in all cases
More informationNATIONAL GYPSUM COMPANY 2-Hour Area Separation Wall System
0 00/NGC NATIONAL GYPSUM COMPANY -Hour Wall System The -Hour is a -hour fire wall consisting of in. (0. mm) light-gauge steel H-Studs that secure two layers of in. (. mm) shaftliner panels friction-fit
More informationProduct Guide Specification Pliteq GenieMat RST-02, RST-05, RST-10, RST-12, RST-15
GenieMat RST SOUND CONTROL UNDERLAYMENT Product Guide Specification Pliteq GenieMat RST-02, RST-05, RST-10, RST-12, RST-15 Specifier Notes: This product guide specification is written according to the
More informationBoise Cascade Company Revised June 25, 2018
Fire-Rated Assemblies PR-S255 Boise Cascade Company Revised June 25, 2018 Products: GPI, WI, and BSI I-Joists Boise Cascade Company, 1000 North Park Drive, Roxboro, North Carolina 27573 (336) 599-1000
More informationEDGEWATER, FLORIDA JUNE 14, 2010
SECTION 09 2116 - NON-LOAD-BEARING STEEL FRAMING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1
More informationC R0 ACOUSTICAL PERFORMANCE TEST REPORT ASTM E 90 AND ASTM E 492. Rendered to. ECORE International. Series/Model: Base 10
ACOUSTICAL PERFORMANCE TEST REPORT ASTM E 90 AND ASTM E 492 Rendered to Series/Model: Base 10 Specimen Type: Floor/Ceiling Assembly Overall Size: 3023 mm by 3632 mm Summary of Test Results Data File Result
More informationBXUV.L521 - Fire Resistance Ratings - ANSI/UL 263. Fire Resistance Ratings - ANSI/UL 263
Page 1 of 8 Page Bottom BXUV.L521 Fire Resistance Ratings - ANSI/UL 263 Fire Resistance Ratings - ANSI/UL 263 See General Information for Fire Resistance Ratings - ANSI/UL 263 Design No. L521 November
More informationC R0 ACOUSTICAL PERFORMANCE TEST REPORT ASTM E 90 AND ASTM E 492. Rendered to. ECORE International. Series/Model: QT4005
ACOUSTICAL PERFORMANCE TEST REPORT ASTM E 90 AND ASTM E 492 Rendered to Series/Model: QT4005 Specimen Type: Floor/Ceiling Assembly Overall Size: 3023 mm by 3632 mm Summary of Test Results Data File Result
More informationC R0 ACOUSTICAL PERFORMANCE TEST REPORT ASTM E 90 AND ASTM E 492. Rendered to. ECORE International. Series/Model: QT4002
ACOUSTICAL PERFORMANCE TEST REPORT ASTM E 90 AND ASTM E 492 Rendered to Series/Model: QT4002 Specimen Type: Floor/Ceiling Assembly Overall Size: 3023 mm by 3632 mm Summary of Test Results Data File Result
More informationC R0 ACOUSTICAL PERFORMANCE TEST REPORT ASTM E 90 AND ASTM E 492. Rendered to. ECORE International. Series/Model: Expona
ACOUSTICAL PERFORMANCE TEST REPORT ASTM E 90 AND ASTM E 492 Rendered to ECORE International Series/Model: Expona Specimen Type: Floor/Ceiling Assembly Overall Size: 3023 mm by 3632 mm Summary of Test Results
More informationBENEFITS OF GREEN GLUE IN STANDARD WALL CONSTRUCTION
WALL TYPES BENEFITS OF GREEN GLUE IN STANDARD WALL CONSTRUCTION STC 39 STC 42 STC 44 Single layer drywall both sides. Double layer drywall one side. Double layer drywall both side STC 46 STC 52 STC 55
More informationThe original. insulation.
The original recycled rubber impact sound insulation. ESTABLISHED 2000. SOUND INSULATION Original. Tested. Guaranteed. Previously Known As Dodge-Regupol QT ACHIEVING KICK NOISE OUT. THE INDUSTRY S BEST
More informationSECTION NON-STRUCTURAL METAL FRAMING
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 22 16 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable
More informationDIVISION: FINISHES SECTION: ACOUSTIC TREATMENT REPORT HOLDER: ECORE INTERNATIONAL, INC.
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1522 Reissued 09/2016 This report is subject to renewal 09/2018. DIVISION: 09 00
More informationRSIC ACOUSTIC ASSEMBLY
RSIC ACOUSTIC ASSEMBLY FLOOR CEILING ASSEMBLY DIRECT FIX TO WOOD I JOIST F4543.05 STC 62 IIC 61 CONSTRUCTION Mannington Hometown Lexington Hickory Hardwood Hacker Industries, Inc. Firm-Fill Gypsum Concrete
More informationPRODUCT GUIDELINES Hacker. Industries, Inc.
PRODUCT GUIDELINES Hacker Industries, Inc. FIRM-FILL Sound Control Mats & Gypsum Underlayments A quiet living space is our business. Established in 1983, Hacker Industries, Inc. offers a full line of FIRM-FILL
More informationI.C.E. BLOCK (U.S. Patent No. 4,223,501) Detail Manual
I.C.E. BLOCK (U.S. Patent No. 4,223,501) Detail Manual An energy efficient - cost effective building system, designed for contractors and property owners alike. 1 TYPICAL WOOD FRAME TO CONCRETE FLOOR 1"
More informationSignatures are required on this document for an official laboratory test report. Copies of this document without signatures are for reference only.
ASTM E 90: Laboratory Measurement of Airborne Sound Transmission of Building Partitions and Elements ASTM E 492: Laboratory Measurement of Impact Sound Transmission through Floor-Ceiling Assemblies Using
More informationBXUV.L576 - Fire Resistance Ratings - ANSI/UL 263. Fire Resistance Ratings - ANSI/UL 263
Page 1 of 7 Page Bottom BXUV.L576 Fire Resistance Ratings - ANSI/UL 263 Fire Resistance Ratings - ANSI/UL 263 See General Information for Fire Resistance Ratings - ANSI/UL 263 Design No. L576 August 15,
More informationSECTION NON-STRUCTURAL METAL FRAMING
SECTION 09 22 16 PART 1 - GENERAL 1.1 DESCRIPTION A. This section specifies steel studs wall systems, shaft wall systems, ceiling or soffit suspended or furred framing, wall furring, fasteners, and accessories
More informationSuper-Compact Ceiling Hanger Model KSCH Patent Pending Ceiling Isolation Theory: Resiliently suspended ceiling systems are designed to minimize floor impact noise and airborne sound transmissions through
More informationKINETICS NOISE CONTROL TEST REPORT #AT001087
KINETICS NOISE CONTROL TEST REPORT #AT001087 KINETICS NOISE CONTROL PRODUCTS: o NONE ACOUSTICAL RATINGS: o FSTC 31 o FIIC 27 REMEDIAL ACTION REQUIRED KINETICS DRAWING NUMBER: AT001087A 6300 IRELAN PLACE,
More informationHow to modify a tested fire-rated wall to improve its STC sound rating, while maintaining its official fire-rated qualification
How to modify a tested fire-rated wall to improve its STC sound rating, while maintaining its official fire-rated qualification Harold FORESTER, Eng. 1 Forester Controls Canada ABSTRACT Local regulatory
More informationRSIC-1-LOW PROFILE SOUND ISOLATION CLIP RSIC-1-LOW PROFILE INSTALLATION GUIDE RSIC-1 LOW PROFILE. For use in conjunction with the RSIC-1 clip
RSIC-1 LOW PROFILE For use in conjunction with the RSIC-1 clip Resilient Sound Isolation Clip (RSIC-1-LOW PROFILE) Spacing: maximum 48 inches on center Maximum acoustical design load: 18 lbs RSIC-LOW PROFILE
More informationRSIC-1-LOW PROFILE SOUND ISOLATION CLIP RSIC-1-LOW PROFILE INSTALLATION GUIDE RSIC-1 LOW PROFILE. For use in conjunction with the RSIC-1 clip
RSIC-1 LOW PROFILE For use in conjunction with the RSIC-1 clip Resilient Sound Isolation Clip (RSIC-1-LOW PROFILE) Spacing: maximum 48 inches on center Maximum acoustical design load: 36 lbs RSIC-LOW PROFILE
More informationRC-1 BOOST SECTION MANUFACATURED SOUND AND VIBRATION CONTROL COMPONENTS PART 1 - GENERAL
SECTION 134813 MANUFACATURED SOUND AND VIBRATION CONTROL COMPONENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationGenieMat FIT. For Weight Drop Impact Insulation. It s not magic, it s engineering. UK EDITION. Impact and Airborne Sound Control
It s not magic, it s engineering. Impact and Airborne Sound Control For Weight Drop Impact Insulation UK EDITION Patents: US Patent 8113495, CA 2505938, Patent Pending All-in-one fitness flooring PRODUCT
More information