TECHNICAL INFORMATION P8/0713 vitroflex NOISE BARRIER features
|
|
- May Newton
- 6 years ago
- Views:
Transcription
1 TECHNICAL INFORMATION P8/0713 vitroflex NOISE BARRIER features Methacrylate cast sheets special for acoustic insulations. Vitroflex NOISE BARRIER sheets placed in a sound barrier to protect a residential area of road traffic noise. PROPERTIES This product is designed for applications where a transparent acoustic insulation is required. High durability, the physical and chemical properties remain unchanged over time. Lighter than most materials with similar optical qualities. High breaking strength. It allows being slightly cold-bended. Easy cleaning. Page 1 of 7
2 APPLICATIONS Construction elements similar to walls (noise barriers) to attenuate the noise: Road traffic Railway traffic Other noises not linked to transport but that cause discomfort to your environment Installation of vitroflex NOISE BARRIER sheet OPERATION Can be stuck, folded, thermoformed, drilled, polished, milled, etc. just as the standard quality Vitroflex. The assembly is very important for optimum results. The piece must be fixed well with elastic joints, and dimensional changes due to temperature must be respected (see linear expansion coefficient). The protective film can be kept during the entire production line, including the thermoformed. 1 Maximum 80 C working temperature. 1 It is advisable to run previous tests because heating temperatures and timing should be adjusted in order to get optimum results. Page 2 of 7
3 MAINTENANCE It is recommended to clean with a soft brush supplied with soft water. Never dry clean or with aggressive products or not neutral soaps. The use of glass washers with alcohol or other similar products may negatively affect the properties and reduce the service life. If desired a strong cleaning, for example for the removal of graffiti, is recommended to consult the chemical resistance of Vitroflex table, do a test on a piece, and preferably use only products recommended by the manufacturer. In case the surface has small scratches due to the daily use, they can be removed using a specific polish for car bodies that is used manually. If deep scratches appear or if it is necessary to polish large surfaces, it is advisable to use an orbital eccentric polishing machine. RANGE Size: They are manufactured according to the European standard of 3050 x 2050 mm. Custom-cut sizes can be supplied. Types and colours: vitroflex XT NOISE BARRIER is the most common by the possibility of having great lengths at a competitive price. Can be supplied in colour from 3000 Kg. vitroflex CAST NOISE BARRIER is used when required coloured in quantities of less than 3000 Kg or special properties such as resistance superior to certain agents. vitroflex REINFORCED is specially designed for application in bridges and flyovers where is required by Directive 89/106/EEC compliance. Thickness: Standard are mm. Various factors should be considered to calculate the necessary thickness. Among them the force of the wind in the area where will be placed, the distance between supports, the type of fixation of the plate to the bracket, the fixing points and the required acoustic attenuation. It can be produced with other thicknesses on request. Page 3 of 7
4 QUALITY Products certified according to standards: 14388:2007 Road traffic noise devices. IN :1997 and EN : 1997 Road traffic noise devices. IN :2011 and in : 2011 Road traffic noise reducing devices: Non acoustic performance :2008 and EN :2004 Road traffic noise reducing devices. Procedures for assessing long term performance. Colour repeatability guaranteed, with certificate colour according to CIE L* a*b*. Compliance with the standard ISO 7823 applicable to cast and extruded acrylic sheets. OTHER AVAILABLE INFORMATION Table of resistance to various chemical products. For handling "Safety Data Sheet" safety data sheet. Colour sheet. Basic manual manipulation of methacrylate. Page 4 of 7
5 Vitroflex NOISE BARRIER TECHNICAL FEATURES Physical properties Relative density - Volumetric mass (A Method) 1,19 g/cm 3 ISO 1183 Water absorption (Method 1) 0,3 % ISO 62 Mechanical properties Tensile strength (Type 1 Test, B speed) 72 MPa ISO 527 Traction elasticity module (Type 1 Test, B speed) 3000 MPa ISO 527 Elongation at break (Type 1 Test, B speed) 5 % ISO 527 Impact strength. Charpy method 17 KJ/m 2 ISO 179/2D Rockwell hardness (M Scale) 100 ISO 2039/2 Bending strength 100 MPa ISO 178 Electrical properties Specific resistance >10 15 Ohm DIN Volume resistance >10 15 Ohm.cm DIN Dielectric constant a) 50 Hz b) 0,1 Hz Thermal properties 3,6 2,8 DIN Coefficient of linear expansion 70, K -1 EN VICAT softening temperature ºC ISO 306 Bending temperature under load (A Method, 1,8 MPa) 105 ºC ISO 75 Dimension variation at elevated temperatures (shrinkage) 2,3 % Annex Optical properties Light transmittance a) Total light transmission at nm b) Light transmission at 420 nm c) Light transmission at 420 nm after 1000 hours in the xenon lamp 93 92,6 91,04 % ISO 2857 Ageing under artificial light a) Light transmission at 420 nm after 672 hours of exposure to a high pressure mercury lamp 82 % ISO 2857 HAZE turbidity value 0,4 % EN Refractive index n 0 (A Method) 1,492 - ISO/R The values of this table refer to the sample of Vitroflex (MCI100NN0030. Typical values are not intended for the design. Page 5 of 7
6 Vitroflex NOISE BARRIER ACOUSTIC PROPERTIES Acoustic attenuation depending on thickness 3 mm 24 db ISO R mm 26 db ISO R mm 28 db ISO R mm 29 db ISO R mm 31 db ISO R mm 32 db ISO R mm 33 db ISO R mm 34 db ISO R mm 36 db ISO R 140 Acoustic attenuation depending on thickness db mm Page 6 of 7
7 Important: The information and statements included are believed to be reliable; however, they should not be interpreted as a guarantee or representation that Polimer Tecnic assumes the legal responsibility. Users must perform all verifications and tests as appropriate to determine the particular suitability of any information or product mentioned in this document. Polimer Tecnic cannot guarantee the competence of the material for any particular purpose. Nothing in this document may be interpreted as a permission, incentive or recommendation to operate any patented invention without a license. Page 7 of 7
LUCITE DIAKON FROST. The textured surface to provides a matt, non-glossy effect giving a cool, soft look and feel with excellent scratch resistance.
key benefits Frost is an acrylic polymer primarily designed for sheet, profile and tube extrusion where a textured surface and unique diffusing properties are key requirements. This makes Lucite Diakon
More informationGlazing Solutions Verglasungen Solutions pour le vitrage
Verglasungen Solutions pour le vitrage CONTENTS 1.0 INTRODUCTION 2 2.0 PERSPEX FROM LUCITE STANDARD PRODUCTS 3 3.0 PERSPEX FROM LUCITE SPECIAL PRODUCTS 3 4.0 APPLICATIONS 5 4.1 Architectural 5 4.2 Balcony
More informationRTV615. Technical Data Sheet
Technical Data Sheet RTV615 Description RTV615, RTV655 and RTV656 silicone rubber compounds are clear liquids which cure at room temperature to high strength silicone rubber with the addition of curing
More informationPhoto. Materials Testing for Manufacturers and Retailers
Photo Materials Testing for Manufacturers and Retailers UL helps you bring safe, high performance materials to the market while protecting your brand When end-product manufacturers are searching for materials
More informationERTALON Extruded Products
ERTALON Extruded Products Polyamides (PA) Main Characteristics: High mechanical strength, stiffness, hardness and toughness Excellent resilience High mechanical damping ability Good sliding properties
More informationRTV615. RTV615 High Strength Transparent Silicone Rubber Compound
RTV615 RTV615 High Strength Transparent Silicone Rubber Compound Product Description RTV615 silicone rubber compound is clear liquid which cure at room temperature to high strength silicone rubber with
More information094: 2000 CEB STANDARD. MEDIUM VOLTAGE PIN INSULATORS & HARDWARE (12kV & 36 kv) CEYLON ELECTRICITY BOARD SRI LANKA
094: 2000 CEB STANDARD MEDIUM VOLTAGE PIN INSULATORS & HARDWARE (12kV & 36 kv) CEYLON ELECTRICITY BOARD SRI LANKA Specification for MEDIUM VOLTAGE PIN INSULATORS & HARDWARE (12kV & 36 kv) CEB Standard
More informationAmodel AS-1133 HS. polyphthalamide. Technical Data Sheet
Technical Data Sheet Amodel AS-1133 HS Amodel AS-1133 HS is a 33% glass reinforced, heat stabilized (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses
More informationSound-absorbing and sound-insulating barriers
Sound-absorbing and sound-insulating barriers innovative and biocompatible solutions for the environment sound-insulation Sound-absorbing and sound-insulating noise barriers for road and rail traffic are
More informationHOSTAFORM C 9021 GV1/30 POM Glass Reinforced
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 02-003, GF26 POM copolymer Injection molding type, reinforced with ca 26 % glass fibers; high resistance
More informationRTV630B. Technical Data Sheet
Technical Data Sheet Description blue two component silicone rubber compound cures at room temperature to a high strength silicone rubber. This product is supplied in a matched kit of base (A) component
More informationVACUUM FILMS RANGE. Elongation on break. Color. Name Description Max. use T C
VACUUM FILMS RANGE Name Description Max. use T C SK2VF120-1 SK2VF125-1 SK2VF180-1 SK2VF180-2 SK2VF205-1 SK2VF205-2 SK2VF205-3 SK2VF220-1 Folding shape dimensional chart Multilayer vacuum film for manufacturing
More informationProperty Unit Standard requirement Result ZrO 2. (ISO : 2008) % Al 2
Zfx Zirconia Page 1 of 6 Manufacturing of crown and bridge frameworks Average Dimension: 98 x 12 mm Appearance: industrially-manufactured solid Colour: white Synonyms CAS-no. EINECS-no. Concentration Molecular
More informationSolef & Hylar PVDF. Polyvinylidene fluoride Typical properties
Solef & Hylar PVDF Polyvinylidene fluoride Typical properties Solef and Hylar PVDF A remarkable combination of properties PVDF is a fluorinated semicrystalline thermoplastic which is obtained by polymerizing
More informationHOSTAFORM C 9021 GV1/30 POM Glass Reinforced
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 02-003, GF26 POM copolymer Injection molding type, reinforced with ca 26 % glass fibers; high resistance
More informationDuPont Kapton HPP-ST
DuPont HPP-ST POLYIMIDE FILM Technical Data Sheet DuPont HPP-ST is a two-sided, treated film that offers the same excellent balance of physical, chemical, and electrical properties over a wide temperature
More informationSIMPLY PRECISE USER MANUAL GRATING DISK. Eigenschaften von linearen Maßverkörperungen
USER MANUAL GRATING DISK Eigenschaften von linearen Maßverkörperungen 2 Index 1. Overview... 3 2. Grating disks - types... 4 3. Properties - Aluminium grating disk... 6 4. Properties - Floatglas grating
More informationLexan* Thermoclear* Plus 9 wall Sheet
Lexan* Thermoclear* Plus 9 wall Sheet Description Lexan* Thermoclear* Plus 9 wall sheet is a unique sheet which combines a high outstanding thermal insulation, high optical properties and an outstanding
More informationDuPont Delrin 100P NC010
Product Information PRODUCT INFORMATION Common features of Delrin acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance,
More informationalimex Product Information
Quality, Flexibility, Knowledge, Experience, Excellence: Solutions in Aluminium Cast Plates. alimex Product Information PROVIDING LEADING-EDGE ALUMINIUM CAST PLATE SOLUTIONS Contents ACP 5080 4-5 ACP 5080R
More informationPhono Spray S-907 system does not contain ozone depleting blowing agents (CFC and HCFC).
DESCRIPTION is a thermo acoustic two-component Polyurethane System comprising polyol and isocyanate. The system is in situ sprayed and medium-density (about 55-65 kg/m 3 ) rigid foam is obtained. It is
More informationUltradur (PBT) Product Range. Ultradur in the web:
Ultradur (PBT) Product Range Ultradur in the web: www.ultradur.de Ultradur (PBT ) Ultradur is BASF s trade name for its line of partially crystalline saturated polyesters. This line is based on polybutylene
More informationNEC Acostix. Sound Attenuation Calculations and Design Software. General Information
NEC Acostix Sound Attenuation Calculations and Design Software General Information NEC Acostix TM is an Excel-Based programmable sheets to help engineers and manufacturers design acoustic enclosures, rectangular
More informationMakrolon 2205 and 2207
Makrolon 2205 and 2207 Polycarbonate (PC) General purpose grades Low viscosity Injection molding Short description Makrolon 2205: Global grade; MVR (300 C/1.2 kg) 35 cm³/10 min; general purpose; low viscosity;
More informationBenefits of hard foam PVC. What are Durasid sidings?
SIDINGS Benefits of hard foam PVC Durable and longer-lasting Hard foam PVC is a durable and resistant plastic that withstands the rigours of time and weather. This guarantees that the sidings will still
More informationCycoloy* Resin C2800 Europe-Africa-Middle East: COMMERCIAL
Non-chlorinated and non-brominated flame retardant PC+ABS offering balanced flow and impact properties for various applications. MECHANICAL Taber Abrasion, CS-17, 1 kg 72 mg/1000cy SABIC Method Tensile
More informationSolid Polycarbonate Sheet. August 2005
Solid Polycarbonate Sheet August 2005 Brett Martin's sheet products are respected around the world for their record in the construction industry. The Marlon range of polycarbonate sheets represent ideal
More informationHigh Performance Plastics for Wind Turbine Engineering
High Performance Plastics for Wind Turbine Engineering 05/2010 Thermoplastics Fiber reinforced plastics Röchling world leader in engineering plastics Your international supplier of technical products As
More informationC27200 CuZn37 Industrial Rolled
C272 Alloy Designation EN DIN CEN/TS 13388 (2.321) CW58L JIS C 272 BS CZ 17 UNS C272 Brass Rolled Products KME offers a wide range of brass rolled products in the form of strips, sheets and discs in order
More informationNTT-AT Optical Adhesives Lineup. Adhesives / Resins and Sealants for Optical Component Assembly
NTT-AT Optical Adhesives Lineup Adhesives / Resins and Sealants for Optical Component Assembly The adhesive technology used in optical communications is one of the key technologies we offer. Ask us anything
More informationCREATING SOLUTIONS PALIGHT. Foamed Flat PVC Sheet. Fabrication Construction Advertising
CREATING SOLUTIONS PALIGHT Foamed Flat PVC Sheet Fabrication Construction Advertising Introduction PALIGHT is a lightweight, flexible and durable foamed PVC sheet that is ideal for advertising and construction.
More informationHT 20plus. Formwork timber beams. Facts on formwork timber beams: Contents. Product standard. Wood types. Beam height. Weight.
Formwork timber beams Facts on formwork timber beams: Contents Wood types Spruce / Fir Beam height 20 cm Lengths Lengths up to 10 m Product standard Technical approval certificate Z-9.1-146 Weight 4,6
More informationNIMROD'S PRODUCT BROCHURE
NIMROD'S PRODUCT BROCHURE JUST A SMALL LISTING OF OUR MASSIVE SELECTION AT NIMROD PLASTICS Phone: (02) 4322 4333 - Fax: (02) 43224 344 3,3 Daintree Close GOSFORD WEST NSW 2250 Australia Copyright Nimrod
More informationSTAIRS & ACCESSIBILITY. STAIRS & ACCESSIBILITY Tapiflex Stairs p. 328 Warning Tile p D Studs p. 332 Tactile strip p. 333
STAIRS & ACCESSIBILITY STAIRS & ACCESSIBILITY Tapiflex Stairs p. 328 Warning Tile p. 330 3D Studs p. 332 Tactile strip p. 333 322 323 OUR SELECTION OF ACCESSORIES FOR STAIRS & ACCESSIBILITY 4 1 Warning
More information3M Contrast Enhancement Film
Technical Data November 2013 3M Contrast Enhancement Film CEF2804 CEF2806 CEF2807 CEF2808 CEF2810 Product Description s (CEF) are specialized optically clear adhesives offering superior clarity and excellent
More informationFORTRON 1140L4 PPS Glass Reinforced
Description Fortron 1140L4 is a 40% glass-reinforced grade that is the strongest and toughest product available. It exhibits excellent heat and chemical resistance, good electrical properties and is inherently
More informationSales Range Molding Compounds PLEXIGLAS PLEXALLOY PLEXIFIX CYROLITE
Sales Range Molding Compounds PLEXALLOY PLEXIFIX CYROLITE October 2004 Table of Contents General Remarks 3 Product Overview 4 Standard Molding Compounds 4 zk Molding Compounds 6 (Impact-Modified) hw Molding
More informationNoryl* Resin SE1GFN1 Europe-Africa-Middle East: COMMERCIAL
Noryl* SE1GFN1 is a 10% glass reinforced, injection moldable modified polyphenylene ether resin. Designed for improved dimensional stability and good flow, this resin also uses non-chlorinated, non-brominated
More informationThis panel with its unique optic has a wide variety of outdoor application possibilities due to special top sheets.
edition 24 Common properties innovative translucent optics excellent light transmission outstanding thermal insulation easy to handle and process flat applications only light weight Highly transparent
More informationHigh grade thermoforming applications SUSTAVACU 6 GF
High grade thermoforming applications SUSTAVACU 6 GF Thermoformable sheets made of shock-resistant, glass fibre reinforced polyamide SUSTAVACU 6 GF Material properties General properties high moisture
More informationC27000 CuZn36 Industrial Rolled
C27 Alloy Designation EN DIN CEN/TS 13388 (2.335) CW57L JIS C 27 BS CZ 18 UNS Chemical Composition Weight percentage C27 Cu 63.5.. 65.5 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with
More informationDuPont Kapton FPC POLYIMIDE FILM
DuPont FPC POLYIMIDE FILM Technical Data Sheet DuPont FPC polyimide film is treated on both sides and has the same excellent balance of physical, chemical and electrical properties over a wide temperature
More informationDELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled
DELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled Base - polyurethane - two-component Use - for the bonding of metal, plastic and sometimes even elastomers -
More informationStaron Exterior Wall Cladding SN
Staron Exterior Wall Cladding Table of Contents 1. Features of Staron Exterior Wall 2. Physical Properties 3. Recommended Color for the Exterior 4. Preparation 4.1 Staron Sheet 4.2 Fabrication Equipments
More informationABS-LIKE VACUUM CASTING URETHANE FOR TECHNICAL PARTS AND PROTOTYPES BASIC PHYSICAL PROPERTIES. Appearance. Color of Finished Article
ABSLIKE BASIC PHYSICAL PROPERTIES Item Data Remarks Appearance A Comp. B Comp. Beige, black, not colored Clear pale yellow Polyols Isocyanates Color of Finished Article Ivory Adjustable to be white or
More informationRHODORSIL RTV 141 A and B
Cancels and replaces SIL 99 248 3 Description RHODORSIL RTV 141 A and B is a two component, polyaddition reaction, room temperature curing silicone elastomer. Curing can be accelerated by heating. After
More informationslimlite Double Glazed Units BS EN 1279 Certificate Double Glazed Units
slimlite Double Glazed Units BS EN 1279 Certificate slimlite Double Glazed Units Timber Georgian Sash and Case with Super Slimlite Double Glazed Units with, 8mm or 10mm cavity will comply with Document
More informationULTRAMID VISION The first semi-transparent polyamide VISION
2 ULTRAMID VISION ION VISION ULTRAMID VISION 3 THE FIRST SEMI-TRANSPARENT POLYAMIDE Thanks to their high chemical resistance and heat resistance, semi-crystalline engineering thermoplastics can be used
More informationVECTRA A150 LCP Glass Reinforced
Description Improved creep resistance over A130. May reduce warpage in some parts compared to A130. 50% glass reinforced. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant
More informationTROCELLEN TROSIL, TROSIL TECH
INSULATION TROCELLEN TROSIL, TROSIL TECH Superior acoustic insulation Acoustic insulation Trosil - Trosil Tech TROSIL Sound insulation of new generation, against impact sound, manufactured by TROCELLEN
More informationLexan*Thermoclear* Solar Control IR Sheet
Lexan*Thermoclear* Solar Control IR Sheet Product Datasheet Description Lexan* Thermoclear* Solar Control IR sheet grades are members of the Lexan Thermoclear* sheet range of high quality, multi-wall polycarbonate
More informationDURAN. Tubing, Capillary and Rod of Borosilicate Glass 3.3
DURAN Tubing, Capillary and Rod of Borosilicate Glass 3.3 SCHOTT is an international technology group with more than 5 years of experience in the areas of specialty glasses, materials and advanced technologies.
More informationHOSTAFORM C POM Unfilled
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 04-002 POM copolymer Easy flowing Injection molding type like C 13021, but with higher strength,
More informationPORON Urethanes. Material Selection Guide For Portable Electronics
PORON Urethanes Material Selection Guide For Portable Electronics PORON Urethane foams ensure reliability where cushioning, sealing, impact protection or energy management are critical to product performance.
More informationStyrolux Styrene-Butadiene Copolymer (SBC) Mechanical and Optical Properties
Styrolux Styrene-Butadiene Copolymer (SBC) Mechanical and Optical Properties Toughness, stiffness and clarity are key attributes of Styrolux Styrene-Butadiene Copolymer (SBC). Another significant property
More informationC51100 CuSn4 Industrial Rolled
Alloy Designation Bronze Rolled Products EN DIN CEN/TS 13388 CW45K JIS C 5111 BS PB 11 UNS Chemical Composition Weight percentage Cu C511 Rest Sn 3.5 4.5 % P.3.35 % This alloy is in accordance with RoHS
More informationMaterial data sheet. EOS MaragingSteel MS1. Description
EOS MaragingSteel MS1 EOS MaragingSteel MS1 is a steel powder which has been optimized especially for processing on EOSINT M systems. This document provides information and data for parts built using EOS
More informationRTV31, RTV60 and RTV88 silicone rubber compounds differ primarily in viscosity in the uncured state.
Technical Data Sheet RTV31 Description RTV31, RTV60 and RTV88 silicone rubber compounds are high temperature two-part silicone elastomers. They are supplied ready-to-use with a base compound and DBT (dibutyl
More informationNOMEX TYPE 410 TECHNICAL DATA SHEET. Electrical properties. Please note: PERFORM WHEN THE HEAT S ON TYPICAL ELECTRICAL PROPERTIES
NOMEX TYPE 41 NOMEX Type 41 is a calendered insulation paper which offers high inherent dielectric strength, mechanical toughness, flexibility and resilience. NOMEX Type 41 is the original form of NOMEX
More informationRTV31, RTV60 and RTV88 silicone rubber compounds differ primarily in viscosity in the uncured state.
Technical Data Sheet RTV88 Description RTV31, RTV60 and RTV88 silicone rubber compounds are high temperature two-part silicone elastomers. They are supplied ready-to-use with a base compound and dibutyl
More informationHT 100 HT 200 HTE FOR THE HIGHEST STANDARDS IN METAL REPLACEMENT AT HIGH OPERATING TEMPERATURES.
TEREZ HT 100 HT 200 HTE FOR THE HIGHEST STANDARDS IN METAL REPLACEMENT AT HIGH OPERATING TEMPERATURES www.terplastics.com www.tergroup.com TEREZ HT 100 HT 200 HTE Metal Replacement at High Operating Temperatures
More informationRadiation Shielding Glass RD 30 RD 50
Radiation Shielding Glass RD 30 RD 50 2 SCHOTT is a leading international technology group in the areas of specialty glass and glass-ceramics. With more than 130 years of outstanding development, materials
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3167 Fourth edition 2002-02-15 Plastics Multipurpose test specimens Plastiques Éprouvettes à usages multiples Reference number ISO 3167:2002(E) ISO 2002 PDF disclaimer This PDF
More informationHigh strain point glass substrate for photovoltaic solar cell
Empowering solar efficiency Module material PV200 High strain point glass substrate for photovoltaic solar cell Much less deformation in the heating process than soda-lime glass. Small variations in thermal
More informationMDS TL5 Minimum Deflection Systems
MDS Minimum Deflection Systems Approvals FHWA NCHRP 350 MASH EN1317 H4 MDS BARRIERS Bridge & Road STEEL BARRIER SYSTEMS Page Page 1 1 V11 MDS BARRIERS Run-off-road crashes are one of the most common types
More informationMDS TL4 Minimum Deflection Systems
MDS Approvals FHWA NCHRP 350 MASH-08 EN1317 H2 Bridge & Road STEEL BARRIER SYSTEMS Page 1 V11 Run-off-road crashes are one of the most common types of crashes in urban and highway environments. Installing
More informationDryflex TPV. Thermoplastic Vulcanisate Compounds
Dryflex TPV Thermoplastic Vulcanisate Compounds CONTENTS INTRODUCTION SERIES OVERVIEW PRODUCT TESTING & PERFORMANCE What is TPV? Compression Set Behaviour TPV or TPS? GRADE TABLES Influence of Oil Dryflex
More informationAraldite LY 5052 Resin / Aradur 5052 Hardener
Araldite LY 5052 Resin / Aradur 5052 Hardener Product Description Araldite LY 5052 is a low-viscosity epoxy resin that is used with Aradur 5052, a mixture of polyamines, to form a cold curing epoxy system.
More informationDuPont Kapton HN POLYIMIDE FILM
DuPont Kapton HN POLYIMIDE FILM Technical Data Sheet DuPont Kapton HN general-purpose film has been used successfully in applications at temperatures as low as -269 C (-452 F) and as high as 400 C (752
More informationcoloured glass effect panels commercial applications
b r i l l i a n t coloured glass effect panels commercial applications www.akril.uk.com www.akril.uk.com b r i l l i a n t what is akril? Akril is an acrylic polymer glass which has been coated with a
More informationNon-rigit-PVC. Soft PVC strips
Non-rigit-PVC Soft PVC strips Description: Soft-PVC plates - transparent, smooth, resistant up to - 15 C (standard) and - 35 C (polar), rounded-off / broken longitudinal edges. Width (mm) 200 300 400 Strength
More informationUltradur (PBT) Product Range. Ultradur in the web:
Ultradur (PBT) Product Range Ultradur in the web: www.ultradur.de Ultradur Ultradur is BASF s trade name for its line of partially crystalline saturated polyesters. This line is based on polybutylene terephthalate
More informationGVB GmbH Solutions in Glass Nordstern-Park Herzogenrath Germany Fax
GVB GmbH Solutions in Glass Nordstern-Park 2 52134 Herzogenrath Germany +49 2406 665588-0 Fax +49 2406 665588-10 info@g-v-b.de www.g-v-b.de EN09 QUARTZ TUBE This standard quartz tube is a kind of clear
More informationTechnical Data Sheet. Cellular Buffers CONTENTS. Order number 018xxxx-xxxY
08xxxx-xxxY CONTENTS Page General information...2 2 Examples of application...2 3 Conductix-Wampfler standard cellular buffer quality...2 4 Quality degrees...3 5 Construction...4 5. With base plate...4
More informationLexan* Thermoclear* 16mm 5X Multiwall Sheet
DESCRIPTION Lexan* Thermoclear* LT2UV165X27 sheet is a unique sheet which combines a high thermal insulation, high light transmission and an outstanding balance of low weight and high stiffness. LT2UV165X27
More informationDuPont Hytrel 3078 THERMOPLASTIC POLYESTER ELASTOMER PRODUCT INFORMATION. Product Information
Product Information PRODUCT INFORMATION Common features of Hytrel thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance
More informationEasylationWall. External Wall Insulation System. bringing european innovation
EasylationWall External Wall Insulation System bringing european innovation EasylationWall... the new External Wall Insulation System using brick slips for stunning façades. EXTERNAL WALL INSULATION (EWI)
More informationA CONCEPT FOR USING RECYCLED RUBBER GRANULES IN NOISE REDUCTION CONCRETE S PANELS
Bulletin of the Transilvania University of Braşov CIBv 2014 Vol. 7 (56) Special Issue No. 1-2014 A CONCEPT FOR USING RECYCLED RUBBER GRANULES IN NOISE REDUCTION CONCRETE S PANELS R.G. ŢARAN 1 1 1 M. BUDESCU
More informationDELO MONOPOX AD286 heat curing, construction adhesive
DELO MONOPOX AD286 heat curing, construction adhesive Base - epoxy resin, construction adhesive - one-component, heat-curing, filled, thixotropic Use - for the bonding of all metal types, temperature-resistant
More informationPhono Spray I-905 system does not contain Ozone Depleting Potential blowing agents.
TECNICAL DATA SEET DESCRIPTION is a thermo acustic two-component Polyurethane comprising polyol, and isocyanate. The system is in situ injected obtaining open cell low-density rigid foams with excellent
More informationOne-part moisture-curing elastic adhesive meeting UL94V-0 flammability standard
Technical Data ThreeBond 1537 Series [TB1537,TB1537B,TB1537D] Apr. 7, 29 Three Bond Co., Ltd. One-part moisture-curing elastic adhesive meeting UL94V- flammability standard 1. Outline ThreeBond 1537 Series
More informationAraldite MY pbw Hardener HY pbw
Vantico Ltd Electronic Polymers Heavy Electrical Araldite Impregnating Resin System Araldite MY 750 100 pbw Liquid, impregnating resin system with low glass transition temperature for coils with excellent
More informationValox* Resin 310SE0 Asia Pacific: COMMERCIAL
VALOX 310SE0 is an unreinforced, flame retardant PBT injection moulding resin. Applications: electrical industry, bobbins, keyboard, switches and switch components and appliance housings. MECHANICAL Tensile
More informationGIESSE OPEN SOURCE SYSTEM CASEMENT PROFILES SYSTEM FOR WINDOWS AND DOORS CASEMENT
GIESSE OPEN SOURCE SYSTEM CASEMENT PROFILES SYSTEM FOR WINDOWS AND DOORS CASEMENT GOS-C SYSTEM THE ITALIAN DESIGN met the best European technology for the construction of windows and doors sashes. GOS-C
More informationThe Perspex Create Product Range
The Perspex Create Product Range We supply a full range of products in an exciting selection of colours and finishes for creative interpretation by architects, specifiers, interior designers, furniture
More informationArmaFORM PET - the green PET
ArmaFORM PET - the green PET With the market introduction of ArmaFORM PET, Armacell paved the way for PET foam cores in the composite industry. But our research did not stop there; as a technology leader,
More informationDIATHONITE SCREED Thermal, breathable and lightened screed
THERMAL ACOUSTIC INSULATION screed DIATHONITE SCREED 1731410 Fiber reinforced screed with cork (granulometry 03 mm 00.12 in), clay, diatomaceous powders and hydraulic binder. Natural readytouse compound
More informationPERSPECTIVES IN PLASTICS
PERSPECTIVES IN PLASTICS Welcome to the world of plastics of PiO Let s achieve things together! Our philosophy WE WOULD LIKE TO BE A RELIABLE PARTNER FOR OUR CUSTOMERS PiO is specialized in delivery and
More informationITB TECHNICAL APPROVAL AT /2012. XPS extruded polystyrene Panel-Base Products
CERTIFIED TRANSLATION FROM POLISH [logo] BUILDING RESEARCH INSTITUTE [ITB] P L 0 0-6 1 1 W A R S Z A WA, u l. F I L T R O WA 1 tel.: (48 22) 825-04-71 ; (48 22) 825-76-55 - fax: (48 22) 825-52-86 T h e
More informationTECHNYL A 205F. Key Properties. Description. Benefits. Applications. Product Data Sheet. Regional Availability
TECHNYL A 205F Description TECHNYL A 205F is an unreinforced polyamide 66 for injection moulding. It is available in natural color. Key Properties General purpose Fast cycle High fluidity Benefits The
More informationCold Rooms Kide
COLD ROOMS Cold Rooms 2 Cold under control KIDE it is a business Group manufacturer of cold-rooms, insulation panels, insulated doors, refrigeration units and drying units, offering integral solutions
More informationMuShield s High Permeability Magnetic Shielding per ASTM A753 Alloy Type 4
MuShield s High Permeability Magnetic Shielding per ASTM A753 Alloy Type 4 Available in coil, sheet, rod, billet, wire, and bar form, MuShield s High Permeability Magnetic Shielding is a soft magnetic
More informationDeep - blue transparent liquid. Specific Gravity Non - Volatile Ingredient 99 % Tensile Strength (kg/cm²) Hardness (Shore D) 90-95
TECHNICAL DATA ThreeBond 3067B Photo Hardening Adhesive This resin uses special denatured acrylate. When 300 to 400 nm ultraviolet rays are irradiated on it, it polymerizes and hardens in minutes. It creates
More informationTechnical Specifications
Technical Specifications Dimafix is a smart adhesive that varies its adherence properties according to the temperature, in the range usually used for 3D printing. Figure 1 shows how Dimafix increases adherence
More informationConstruction. Sarnafil TS Polymeric membrane for roof waterproofing. Product Description
January, 2009 Sarnafil TS 77-15 Polymeric membrane for roof waterproofing Construction Product Description Uses Characteristics / Advantages Approval / Standards Sarnafil TS 77-15 (thickness 1.5 mm) is
More informationFIBRANgeo R-050. Stonewool Insulation Roll. Product Description. Advantages TECHNICAL DATA SHEET
FIBRANgeo R-050 Stonewool Insulation Roll Product Description FIBRANgeo R-050 Stonewool Insulation Roll is industrially produced from molten rock spun into fibres. It is classified as mineral wool product
More informationPolypropylene or polypropene (PP) is a thermoplastic polymer, made from the monomer propylene (propene):
Polypropylene (PP) Technical University of Gabrovo Milena Koleva General General Polypropylene or polypropene (PP) is a thermoplastic polymer, made from the monomer propylene (propene): Its molecular mass
More informationFORTRON 6165A6 PPS Mineral / Glass Reinforced
Description Fortron 6165A6 is an easier flow version of Fortron 6165A4. It offers similar characteristics to the 6165A4. Applications include electronic components (i.e. lamps housings and sockets) and
More informationTECHNYL A 218 V35 BLACK 21N
TECHNICAL DATA SHEET TECHNYL A 218 V35 Black 21N is a polyamide 66, reinforced with 35% of glass fibre, heat stabilized, for injection moulding. This grade offers an excellent combination between thermal
More information