Type II Environmental Declaration according ISO 14021:2001/A1:2011

Size: px

Start display at page:

Download "Type II Environmental Declaration according ISO 14021:2001/A1:2011"

Belinda Willis
6 years ago
Views:

Type II Environmental Declaration according ISO 14021:2001/A1:2011 Product: Hunter Douglas Panels Module 200-600mm Product code: 26005 Module 601-900mm Product code: 26025 Module 901-1200mm Product

1 Type II Environmental Declaration according ISO 14021:2001/A1:2011 Product: Hunter Douglas Panels Module mm Product code: Module mm Product code: Module mm Product code: Module mm Product code: Corner 150L Product code: Corner 150R Product code: This declaration is issued by: Hunter Douglas Europe BV Piekstraat 2 NL-3071 Rotterdam Production location: Hunter Douglas Construction Elements Industriepark 17 NL-9351 PA Leek Page 1 of 10 Date: 7 November 2012

2 Table of contents 1. Description of the building product Description of the product and of the application: Components / Materials Additional information on production/ assembly Additional information concerning integration and application of the product in a building Characterisation of the product in delivery condition Fitting, Erection, Installation in the Building Additional information supporting potential modelling of the use stage of the product Additional information for end of life processes Page 2 of 10 Date: 7 November 2012

3 1. Description of the building product 1.1 Description of the product and of the application: Definition of the product Hunter Douglas Sandwich Wall 60mm Polyurethane Foam Façade Panels Hunter Douglas Sandwich Wall 60mm Polyurethane Foam Façade system is an insulated Façade system with a single layer composition. The façade elements consist of a CFC/HCFC free, Zero ODP Polyurethane foam core, a coated aluminium sheet bonded to the outside, and a coated aluminium sheet bonded to the reverse side. Sandwich Wall 60mm Polyurethane Foam System: Insulated Façade panel: Type: Insulated panel in modules in variable lengths up to 12000mm. The panel will be formed with an extruded PVC profile along the length of the element (at one side), Polyurethane foam core and coated aluminium sheets at the outside and inside. Material: The Sandwich Wall Polyurethane foam elements shall consist of two skins of smooth or embossed aluminium alloy EN AW3005. The core of the panel will be foamed vertically, providing a core of modified foam with an overall density of 50 kg/m³ in CFC and HCFC free foam. Thickness: 60mm thick composite panel formed in controlled factory conditions with a core of polyurethane foam. Outer skin 0.7mm thick smooth or embossed aluminium, inner skin 0.7mm thick smooth or embossed aluminium. Finish/colour: The panel will be painted on the outside surface with factory applied Luxacote paint / PVF 2 paint finish and will provide a minimum hardness factor of 2H (EN : Pencil hardness) test to external colour/ finish and standard coated internal finish/ colour. COMPOSITE BUILD-UP 1. Pre-coated and roll formed aluminium external skin 2. Polyurethane foam core 3. Pre-coated and roll formed aluminium internal skin 4. PVC profile Page 3 of 10 Date: 7 November 2012

4 Fixing system: 3 options: 1) The panels will be laid horizontally and connected both horizontally and vertically by Hunter Douglas Bi-Modular patented thermally broken, tongue and groove joint. The vertical Bi-Modular D joint will allow for panel removal/ replacement in columns of horizontal cladding in bays without interference on adjacent cladding bays, and incorporate an insulation insert and inner flashing. 2) The panels will be laid horizontally and connected over their length by the Hunter Douglas patented thermally broken tongue and groove joint, and at their ends by the Hunter Douglas extruded Top-Hat system. The Top-Hat system consists of the following elements: clip in cover insert having a super durable polyester powder coating (from standard matt/ special colour range to match cladding panels), extruded exterior Top-Hat profile, butt-traps, fixings, tape, silicone, insulation and inner Top-Hat profile. 3) The panels will be laid vertically, connected over their length by the Hunter Douglas patented thermally broken tongue and groove joint. Joint type: The horizontal and/or vertical joints will have a recessed depth of 10mm and a shoulder radius of 3.5mm. The joint will have a standard width of 25 mm and will incorporate facilities for allowing adjustment of ±3mm. An outer seal shall be provided by the Hunter Douglas proprietary chevron gasket. Primary cladding fasteners: By types as recommended by Hunter Douglas as follows: 1) To Cold Rolled sections by Auxiliary Clamp ref ) To Hot Rolled sections (for steel flanges up to 14mm maximum thickness) by either L.H. Clamp ref or R.H. Clamp ref ) In circumstances where detail does not permit the use of either options 1) and 2) the Face Fix Clamp ref together with an appropriate screw may be used having regard for the pullout/ cantilever effect the clamp will have on the screw and its relationship to the wind loading and thermal bow criteria. Primary support structure: TBA by Architect Secondary support/ framing system: Material: TBA by Architect Fasteners: TBA by Architect Backing wall: TBA by Architect Page 4 of 10 Date: 7 November 2012

5 Intended use / Application Product standard / technical approval Large and flat Insulated Façade panels for exterior wall, wall claddings and ceiling applications. Available in multi-optional finishing and special corner solutions: curved or cranked. Capability to withstand high wind loads. Made to measure product. CE-marking according to EN 14509:2006 Factory Quality Standard: EN-ISO 9001: 2008, Product Certificates: BS 476 5/6/7/12/20, ISO 8301, DIN 1052/1055/4108/4113/18/164, BS 5368 part 2, NEN 3660 MPA Dresden 2011-B-2179/01 Class B,s3,d0 Coil coating conform EN Durability: Table C1 category 4C. 2. Components / Materials Since Hunter Douglas Sandwich Wall 60mm Polyurethane Foam is a made to measure product, this declaration, in the Components/ Materials section, gives information on a representative average product size. Composition / configuration of the product Functional unit: 1 sqm One panel Sandwich Wall 60mm Polyurethane Foam of modular dimensions 0.9 m 5.0 m. Total weight of the product: 34.1 kg Type of element Weight per sqm Surface area Material Recycled content Description Aluminium skins 0.7mm 3.78 kg 2.0 m 2 EN AW PVC profile 0.8 kg 1.11 m 1 PVC 0% 94% Coil coated aluminium with Luxacote or PVF 2 coating. PU foam 3.00 kg 1.0 m 2 PU 0% Polyurethane foam 50 kg/m 3 Total recycled panel content by weight 50.1% 3. Additional information on production/ assembly Documentation of availability, extraction and origin of materials Sandwich Wall 60mm Polyurethane Foam consists for over 50% of aluminium. Due to metallurgical constraints (in particular corrosion resistance), part of this is primary aluminium. The raw material for primary aluminium is extracted through industrial processes from the earth. As the aluminium used in Page 5 of 10 Date: 7 November 2012

6 Sandwich Wall 60mm Polyurethane Foam is sourced from third parties, Hunter Douglas has no information as to the location of extraction of the raw material. Production Packaging Documentation of aspects of occupational health and safety during production Management systems in place As shown in the table of section 2, depending on the size of the panels, the total percentage of recycled content is around 50%. There is no information on the origin of this recycled content. Most likely, both pre- and post consumer sources are used in varying ratio. For the production of Sandwich Wall 60mm Polyurethane Foam Façade Panels the components are supplied by multiple suppliers. The components are modified and compiled to Sandwich Wall 60mm Polyurethane Foam Façade Panels by the following performed operations and compositions: Slitting: Work up coil in such a way that the width is suitable for the next process. The scrap from the slitting process is being recycled. Roll forming: Profiling strip on coil and cutting to length in order to get a suitable profile for making the final panel. Foaming: placement of the PVC profile and vertically foaming the polyurethane foam core. Specials: Panels which need a non-standard shape are processed in such a way that the requested shape is realised. All finished products are packed before shipment to the customer. The products are packed in wooden packaging materials on wooden pallets. The wood used is Whitewood which originates from European production forests. Recycled carton is used to pack the panels within the wooden packaging. Between the panels PE foam protection sheet is placed. For weathering protection the packed pallet is wrapped in plastic. No additional health protection measures beyond the legally binding national or European Union safety regulations are required during the entire manufacturing process. ISO 9001 ISO Page 6 of 10 Date: 7 November 2012

7 4. Additional information concerning integration and application of the product in a building 4.1 Characterisation of the product in delivery condition Characteristics Sandwich Wall 60mm Polyurethane Foam is a made to measure product. Dimensions: There are no standard sizes for Panels. Product limitations: length up to 12000mm x mm in width. Thickness: 60mm. Weight: approximately 7.6 kg/m² Units per delivery: No restrictions Fire behaviour: BS 475 part 5/6/7/12/20, DIN 4102 B1/B2, MPA Dresden 2011-B-2179/01 Class B,s3,d0 Coil coating: conform EN Fitting, Erection, Installation in the Building Ancillary materials Recommendations for avoiding environmental impacts at the building site/ installation site Panels are part of the Sandwich Wall 60mm Polyurethane Foam Insulated Façade System. In addition to the panels, this system consists of: Primary Cladding Fasteners : The panels will be fastened by the Hunter Douglas proprietary extruded aluminium cladding fasteners which will be fixed to a support system. At the building site the system will be installed onto the existing primary or secondary support structure (provided by others) and will be able to accommodate the imposed loadings. When handling the Sandwich Wall 60mm Polyurethane Foam Façade Panels, care must be taken that they are treated correctly. This applies to their transport, storage on site, unpacking and installation. The product shall only be used for its intended purpose. The installer has to execute the installation with appropriate care to avoid scratches, damages, etcetera. Avoid installation of the product in extreme weather conditions. Protective foils on the panels may only be removed after finishing of the installation. It is however recommended that the protective Page 7 of 10 Date: 7 November 2012

8 Documentation of aspects of occupational health and safety Documentation of environmental aspects Recommendations for waste at the building site foil is removed from the panels within approximately 2-3 months, the former on sun facing elevations in summer conditions When cleaning after installation is required, it is advised to use a slightly damp, non-linting and non-abrasive cloth. A mild (ph=7) cleaning agent may be used if necessary. Never use aggressive cleaning agents since they will cause damage to the panels. Before cleaning, always try the chosen method of cleaning on a non-visible part of the panel. After cleaning rinse with sufficient clean water to wash down remains of cleaner and dirt. There is no need for special measures for health and occupational protection at the building site during installation, other than the normal safety precautions required by public law when installing a façade. The product has no known impact on the environment. No special measures are necessary for the protection of the environment. panels are made to measure. This means that, besides the packaging material, there is no residual material or scrap at the building site. 5. Additional information supporting potential modelling of the use stage of the product Aspects of health and environment Service life In the use stage of Sandwich Wall 60mm Polyurethane Foam Façade Panels there are no emissions to air and no impacts on indoor air. In the use stage of Sandwich Wall 60mm Polyurethane Foam Façade Panels with coil coated facings there are no known emissions to the soil, surface water and ground water. Panels have an expected service life of over 50 years. Page 8 of 10 Date: 7 November 2012

9 Maintenance Cleaning Panels are extensively tested for corrosion resistance, fire resistance and wind-load performance. Other than cleaning, Sandwich Wall 60mm Polyurethane Foam Façade Panels are essentially maintenance free. Cleaning the coated aluminium of façades should be part of the maintenance of the building. In general once every six months. This maintenance should already start at an early stage. When cleaning is required, it is advised to use a slightly damp, non-linting and non-abrasive cloth. A mild (ph=7) cleaning agent may be used if necessary. Never use aggressive cleaning agents since they will cause damage to the panels. Before cleaning, always try the chosen method of cleaning on a non-visible part of the panel. After cleaning rinse with sufficient clean water to wash down remains of cleaner and dirt. External influences Cleaning: When the cleaning instructions are followed normally no problems should occur. Water: Sandwich Wall 60mm Polyurethane Foam Façade Panels are impenetrable elements which will not be affected by water. Wind: Sandwich Wall 60mm Polyurethane Foam Façade Panels are able to withstand extremely high wind loads. Thermal shock: Expansion/contraction: The Sandwich Wall 60mm Polyurethane Foam Façade Panels s expansion / contraction is controlled through allowing sliding movement in the fixing clamps and as such no deformations will occur due to thermal movement of the panels. UV: the coatings used for the coil coat treatment have a high level of colour continuity. EN 1396, UV resistance index 3. Fire: Sandwich Wall 60mm Polyurethane Foam Façade Panels are tested BS476 part 7, class1 and tested and classified according EN Class B,s3,d0. Page 9 of 10 Date: 7 November 2012

10 6. Additional information for end of life processes Documentation of Recycling information Documentation of Disposal / landfill information Panels have excellent recyclability, in principle the product can be fully recycled. Recycling requires an intermediary processing step in which coatings, PVC profiles and the polyurethane foam are removed. Depending on the geography, collection rates for aluminium building products are normally above 95%. Disposal and incineration of PVC and Polyurethane foam will provide a positive energy gain. Page 10 of 10 Date: 7 November 2012

70S - 132S SUN LOUVRE. Sun Control Systems

70S - 132S SUN LOUVRE. Sun Control Systems 70S - 132S SUN LOUVRE www.luxalon.com Sun Control Systems Luxalon 70S - 132S Sun Louvre System Description The Luxalon 70S and 132S Sun Louvre system consist of sturdy Z-shaped panels. The panels are used