Thermacore Door Systems
|
|
- Lenard Knight
- 6 years ago
- Views:
Transcription
1 Thermacore Door Systems Product Line SERIES INDUSTRY LEADING COMMERCIAL & INDUSTRIAL SOLUTIONS
2 Thermacore : Patented Construction for Outstanding Thermal Efficiency THE TURNKEY SOURCE FOR COMMERCIAL AND INDUSTRIAL SOLUTIONS AND SERVICE Selection of Overhead Door products automatically includes the unequaled expertise and experience of Overhead Door Ribbon distributors. Nationwide coverage by our 400+ Ribbon distributors is unique in our industry providing a single source for design and application consulting, installation, service and ongoing maintenance. Turnkey services to maximize the lasting value of your product choice. Your Overhead Door Distributor is also your only source for a full line of commercial and industrial door and operator systems specifically designed for integrated applications. For over four generations, our 400+ Ribbon Distributors have been committed to providing commercial and industrial door solutions. Combined with Overhead Door product design and manufacturing superiority, our distributors are a proud part of the Overhead Door family, sharing our name, our Ribbon logo and our commitment to industry leading innovation and excellence. GENERAL FEATURES AND BENEFITS R-Values Up to (3.09 W/Msq) and Air Infiltration Performance up to.08 cfm at 25 MPH (2.26 Lpm at 40 kmph) Continuous foamed-in-place panel construction provides one of the highest R-values in the industry year in, year out Dual PVC thermal break and joint seal between internal and external skins minimize air infiltration and provide the highest door system thermal efficiency in the industry Specially designed track and heavy-duty fixtures ensure a tight and reliable fit Lightweight, Strong and Durable Panel Construction Steel-polyurethane-steel panel construction provides superior thermal efficiency, and exceptional strength-toweight ratio and proven durability Roll-formed, hot-dipped galvanized steel interior and exterior panels Two coats of baked-on polyester paint provide a durable finish Meets Stringent Windload Requirements Exceptional panel strength and superior track design withstands harsh wind conditions, in accordance with ANSI/DASMA Built to Last 10-year * limited warranty against panel delamination of foam and steel skins High-Usage Components for Special Applications Promotes Long Life and Low Maintenance Heavy-duty, precision ground headplate bearings for enhanced counterbalance performance Oil-tempered, heavy-duty helical wound, torsion springs, available in 25,000, 50,000, 75,000 or 100,000 cycles for extra long life Solid-steel counterbalance shaft reduces fatigue and deflection Double end stiles and end hinges lessen loads on door-section Heavy-duty 3" (76 mm) hot-dipped galvanized steel track and 10 ball-bearing, long-stem rollers Additional center hinges reduce overall door section hinge loads Bottom sensing edge stops/reverses door upon contact with an obstruction Environmentally Friendly Specially formulated polyurethane foam insulation ensures no ozone-damaging CFCs are used in the manufacturing process or in the panels Easy Field Repairability Unique design allows on-site door customization for quick and precise installation, replacement or repairs A Broad Line to Fit Every Application Standard door widths up to 40'2" (12,243 mm) and heights up to 32'1" (9,779 mm) Doors for extra-heavy-duty, heavy-duty, medium-duty and light-duty applications *8-year on 598 Series DOOR
3 Thermacore Door System Thermacore is the premier insulated steel sectional door available today. It is an ideal choice for applications that demand the highest levels of thermal efficiency, air infiltration and windload resistance. Manufactured using a unique, computer-controlled process, Thermacore s steel-polyurethane-steel sandwich panels are lightweight, incredibly strong and exceptionally energy efficient even under the most severe climatic conditions. Suitable for a wide range of applications, Thermacore doors feature a host of industry-leading design innovations including dual PVC thermal break and joint seal, a CFC-free polyurethane core, and a special internal construction for easy field serviceability. Installation and Service: Overhead Door Company of Twin Falls overhead door corporation 1
4 Thermacore Door Selection Chart Series Series 599 (flush) Series 595 Series 593 Series 594 Series 598 Series Series 595 Series Series 598 Hot -Dipped Galvanized Roll-Formed Steel CFC-Free Polyurethane Core Hinge PVC Thermal Break Integral Steel Hinge Mounting Strip Hot -Dipped Galvanized Roll-Formed Steel CFC-Free Polyurethane Core Hinge PVC Thermal Break Integral Steel Hinge Mounting Strip Hot -Dipped Galvanized Roll-Formed Steel CFC-Free Polyurethane Core Hinge Intermediate EPDM Rubber Seal Hot Melt Thermal Break Integral Steel Hinge Mounting Strip Hot -Dipped Galvanized Roll-Formed Steel CFC-Free Polyurethane Core Hinge Hot Melt Thermal Break Integral Steel Hinge Mounting Strip.08 cfm (2.26 Lpm) PVC white, brown beige.08 cfm (2.26 Lpm) PVC white, industrial brown or gray.08 cfm (2.26 Lpm) PVC.15 cfm (2.24 Lpm) 20.2 (6147 mm) white, industrial brown or gray white, brown beige.15 cfm (2.24 Lpm) 20.2 (6147 mm) white, brown chestnut brown beige 16.2 (4928 mm) 2
5 Thermacore Door System Series Exterior Color Options Door Profile Double Thermal Acrylic Glazing White Industrial Brown Aluminum Sash Section* with DSB Glazing Chestnut Brown** Insulated DSB* *Not available on 598 See chart below for application color availability. White is the standard interior color for all models. **594 only Series 594 Series Door Profile Glazing Door Profile Glazing Insulated DSB Double Thermal Acrylic Insulated DSB Aluminum Sash Section with DSB Glazing Contact your local Overhead Door Distributor or refer to the Overhead Door Architectural Design Manual for specific glazing detail Aluminum Sash Section with DSB Glazing components overhead door corporation 3
6 Extra-Heavy-Duty Thermacore Doors SERIES With a R-value (3.09 W/Msq) and.057 U-value (.324 Msq/W), the 592/599 Series Thermacore is the energy-efficient door of choice for commercial use. The 592/599 Series also incorporates an EPDM thermal break and joint seal to prevent thermal transfer between exterior and interior door panel skins. The door is designed for the most demanding situations, including highcycle, windload and thermal applications. ARCHITECTURAL SPECIFICATIONS * Standard Features At a Glance Panel thickness R-value U-value Air infiltration: at 15 mph (24 kmph) at 25 mph (40 kmph) Thermal break Exterior steel Exterior surface Windload * 2" (51 mm) (3.09 W/Msq).057 (.324 Msq/W).08 cfm (2.26 Lpm).08 cfm (2.26 Lpm) PVC.016" (.41 mm) galv. Ribbed, textured Meets ANSI/DASMA Standard springs 10,000 cycle Std. maximum width 40'2" (12,243 mm) Std. maximum height 32'1" (9,779 mm) Exterior color White (592, 599) Kynar white, brown, and beige (592 only) Interior color Limited warranty * Consult factory for requirements Options Thermal glazing Four-section pass door High-usage components* Electric operator Chain hoist Posi-Tension drums Safety bottom fixture Bottom-sensing edge EPDM rubber header seal Aluminum sash section available to 22' 2" (6,756 mm) wide Exhaust ports White 10-year delamination * Refer to General Features and Benefits on inside front cover PART 1 GENERAL 1.01 Work Included The doors will be Thermacore Series 592 (Series 599, flush panel) as manufactured by Overhead Door Corporation Related Work Opening preparation, miscellaneous or structural metal work, access panels, finish or field painting, field electrical wiring, wire, conduit, fuses and disconnect switches are in the Scope of Work of other divisions or trades Quality Assurance In accordance with accepted quality assurance guidelines for motor-operated doors, both the Thermacore door and electric operator (optional) shall be manufactured by a single-source producer of door systems; as by Overhead Door Corporation. PART 2 PRODUCT 2.01 Sections Section profile will be ribbed, (599 flush) textured surface. Sections will be roll-formed, hot-dipped, galvanized steel exterior no less than.016" (.41 mm). Sections will be manufactured by a continuous foamed-inplace polyurethane lamination process resulting in a metal/foam/metal sandwich of homogenous polyurethane insulation. Exterior surface will be ribbed, (flush) textured surface. Sections (Panels) will have a thickness of 2" (51 mm) and will incorporate a dual PVC thermal break and joint seal to prevent heat or cold conductivity Insulation Insulation will be a rigid, foamed-in-place, polyurethane core free of CFCs and will be fully encapsulated in nonpermeable materials to prevent loss of thermal efficiency over time. The insulation will have an R-value of (3.09 W/Msq), U-value of.057 (.324 Msq/W) calculated values based on certified test data.
7 Thermacore Door System SERIES Air Infiltration All doors will be constructed with an air infiltration rating of.08 cfm per square foot of door at 15 mph (2.26 Lpm at 24 kmph) and.08 cfm per square foot of door at 25 mph (2.26 Lpm at 40 kmph). (ASTM-E ) 2.04 Windload ANSI/DASMA standards and as required by code. Consult factory for specific requirements End Stiles End stiles will be of 16-gauge steel and incorporate a thermal break to help prevent heat/cold conductivity between the inside and outside steel skins Hardware Hinges and fixtures will be galvanized steel. Full floating ballbearing rollers will have hardened steel races. Roller sizes will be adequate for design requirements and limitations. Standard springs will be 10,000 cycles. (Higher cycle springs are optional in 25,000, 50,000, 75,000, and 100,000 cycles.) 2.07 Track Track is 2" (51 mm) standard or (3" (76 mm) optional) and angle-mounted. Bracket-mounted track is an option, but not available on full vertical doors Lock Lock will be interior mounted slide lock. (Keyed lock) 2.09 Weatherstrip Weatherstrip between sections will be dual PVC thermal break and joint seal. Bottom weatherstrip will be EPDM rubber bulb-type strip Finish Finish will be two-coat baked-on polyester with a white interior and white exterior. (Kynar white, brown and beige is available for 592) 2.11 Operation Operation will be by manual pull rope. (Optional chain hoist and electric operator are available.) PART 3 EXECUTION 3.01 Execution Install the doors in accordance with Overhead Door Corporation instructions and standards, using an authorized Overhead Door Corporation distributor. *Note to specifier: This specification is a suggested guide. Available options are shown in parentheses. Installation and Service: Overhead Door Company of Albany overhead door corporation 5
8 Heavy-Duty Thermacore Doors SERIES 591 The 591 Series is the best-selling door in the Thermacore line, and offers superior thermal efficiency to fit a broad range of applications. The 591 Series exterior skin is constructed of galvanized steel with a ribbed, textured finish. It is available with a white interior finish and either a white or Industrial brown exterior. ARCHITECTURAL SPECIFICATIONS * 591 Standard Features At a Glance Panel thickness R-value U-value Air infiltration: at 15 mph (24 kmph) at 25 mph (40 kmph) Thermal break Windload Exterior steel Exterior surface Standard springs Std. maximum width Std. maximum height Exterior color Interior color Limited warranty Options Installation and Service: Overhead Door Company of Southwestern Idaho 1 5/8" (41 mm) (2.63 W/Msq).067 (.380 Msq/W) Thermal glazing Four-section pass door High-usage components* Electric operator Chain hoist Posi-Tension drums Safety bottom fixture Bottom-sensing edge EPDM rubber header seal Aluminum sash section available to 22'2" (6,756 mm) wide Exhaust ports.08 cfm (2.26 Lpm).08 cfm (2.26 Lpm) PVC Meets ANSI/DASMA " (.41 mm) galv. Ribbed, textured 10,000 cycle 35'2" (10,719 mm) 24'1" (7,341 mm) White, Industrial brown or gray White 10-year delamination PART 1 GENERAL 1.01 Work Included The doors will be Thermacore Series 591 as manufactured by Overhead Door Corporation Related Work Opening preparation, miscellaneous or structural metal work, access panels, finish or field painting, field electrical wiring, wire, conduit, fuses and disconnect switches are in the Scope of Work of other divisions or trades Quality Assurance In accordance with accepted quality assurance guidelines for motor-operated doors, both the Thermacore door and electric operator (optional) shall be manufactured by a single-source producer of door systems; as by Overhead Door Corporation. PART 2 PRODUCT 2.01 Sections Section profile will be ribbed, textured surface. Sections will be roll-formed, hot-dipped, galvanized steel exterior no less than.016" (.41 mm). Sections will be manufactured by a continuous foamed-in place polyurethane lamination process resulting in a metal/foam/metal sandwich of homogenous polyurethane insulation. Sections (Panels) will have a thickness of 1 5/8" (41 mm) and will incorporate a dual PVC thermal break and joint seal to prevent heat or cold conductivity Insulation Insulation will be a rigid, foamed-in-place, polyurethane core free of CFCs and will be fully encapsulated in nonpermeable materials to prevent loss of thermal efficiency over time. The insulation will have an R-value of (2.63 W/Msq), U-value of.067 (.380 Msq/W) calculated values based on certified test data. * Refer to General Features and Benefits on inside front cover 6
9 Thermacore Door System SERIES Air Infiltration All doors will be constructed with an air infiltration rating of.08 cfm per square foot of door at 15 mph (2.26 Lpm at 24 kmph) and.08 cfm per square foot of door at 25 mph (2.26 Lpm at 40 kmph). (ASTM-E ) 2.04 Windload ANSI/DASMA standards and as required by code. Consult factory for specific requirements End Stiles End stiles will be 16-gauge steel Springs Standard springs will be 10,000 cycles. (25,000, 50,000, 75,000, 100,000 cycle springs are optional.) 2.08 Hardware Hinges and fixtures will be galvanized steel. Full-floating, ballbearing rollers will have hardened steel races. Roller sizes will be adequate for design requirements and limitations Track Track is 2" (51 mm) standard or (3" (76 mm) optional) and angle mounted. (Bracket-mounted track is an option, but not available on full vertical doors.) 2.10 Lock Lock will be interior mounted slide lock. (Keyed lock) 2.11 Weatherstrip Weatherstrip between sections will be a dual PVC thermal break and joint seal. Bottom weatherstrip will be EPDM rubber bulb-type strip Finish Finish will be two-coat baked-on polyester with a white interior and white exterior. (An optional Industrial brown and gray are available.) 2.13 Operation Operation will be by manual pull rope. (Optional chain hoist and electric operator are available.) PART 3 EXECUTION 3.01 Execution Install the doors in accordance with Overhead Door Corporation instructions and standards, using an authorized Overhead Door Corporation distributor. *Note to specifier: This specification is a suggested guide. Available options are shown in parentheses. Installation and Service: Overhead Door Company of Twin Falls overhead door corporation 7
10 Heavy-Duty Thermacore Doors SERIES 595 The Thermacore 595 Series offers superior thermal efficiency for heavy-duty applications. The 595 Series is constructed of 20-gauge galvanized steel with a flush, textured finish. 595 Series doors also carry a Class 26 sound transmission rating for applications where sound suppression is desirable. ARCHITECTURAL SPECIFICATIONS * 595 PART 1 GENERAL Standard Features At a Glance Panel thickness 1 5/8" (41 mm) R-value (2.63 W/Msq) U-value.067 (.380 Msq/W) Air infiltration: at 15 mph (24 kmph).08 cfm (2.26 Lpm) at 25 mph (40 kmph).08 cfm (2.26 Lpm) Thermal break PVC Windload Meets ANSI/DASMA Exterior steel 20-gauge galvanized Exterior surface Flush, textured Standard springs 10,000 cycle Sound transmission rating Class 26 Std. maximum width 36'2" (11,024 mm) Std. maximum height 24'1" (7,341 mm) Exterior color White Interior color White Limited warranty 10-year delamination Options Thermal glazing Four-section pass door High-usage components* Electric operator Chain hoist Posi-Tension drums Safety bottom fixture Bottom-sensing edge EPDM rubber header seal Aluminum sash section available to 22'2" (6,756 mm) wide Exhaust ports * Refer to General Features and Benefits on inside front cover 1.01 Work Included The doors will be Thermacore Series 595 as manufactured by Overhead Door Corporation Related Work Opening preparation, miscellaneous or structural metal work, access panels, finish or field painting, field electrical wiring, wire, conduit, fuses and disconnect switches are in the Scope of Work of other divisions or trades Quality Assurance In accordance with accepted quality assurance guidelines for motor-operated doors, both the Thermacore door and electric operator (optional) shall be manufactured by a single-source producer of door systems; as by Overhead Door Corporation. PART 2 PRODUCT 2.01 Sections Section profile will be a flush, textured surface. Sections will be roll-formed, hot-dipped, galvanized steel exterior no less than 20-gauge. Sections will be manufactured by a continuous foamed-in place polyurethane lamination process resulting in a metal/foam/metal sandwich of homogenous polyurethane insulation. Sections (Panels) will have a thickness of 1 5/8" (41 mm) and will incorporate a dual PVC thermal break and joint seal to prevent heat or cold conductivity Insulation Insulation will be a rigid, foamed-in-place, polyurethane core free of CFCs and will be fully encapsulated in nonpermeable materials to prevent loss of thermal efficiency over time. The insulation will have an R-value of (2.63 W/Msq), U-value of.067 (.380 Msq/W) calculated values based on certified test data. 8
11 Thermacore Door System SERIES Air Infiltration All doors will be constructed with an air infiltration rating of.08 cfm per square foot of door at 15 mph (2.26 Lpm at 24 kmph) and.08 cfm per square foot of door at 25 mph (2.26 Lpm at 40 kmph). (ASTM-E ) 2.04 Windload ANSI/DASMA standards and as required by code. Consult factory for specific requirements Sound Transmission Doors will have Class 26 sound transmission End Stiles End stiles will be 16-gauge steel Springs Standard springs will be 10,000 cycles. (25,000, 50,000, 75,000, 100,000 cycle springs are optional.) 2.08 Hardware Hinges and fixtures will be galvanized steel. Full-floating, ballbearing rollers will have hardened steel races. Roller sizes will be adequate for design requirements and limitations Track Track is 2" (51 mm) standard or (3" (76 mm) optional) and angle-mounted. (Bracket-mounted track is an option, but not available on full vertical doors.) 2.10 Lock Lock will be interior mounted slide lock. (Keyed lock) 2.11 Weatherstrip Weatherstrip between sections will be a dual PVC thermal break and joint seal. Bottom weatherstrip will be EPDM rubber bulb-type strip Finish Finish will be two-coat baked-on polyester with a white interior and white exterior Operation Operation will be by manual pull rope. (Optional chain hoist and electric operator are available.) PART 3 EXECUTION 3.01 Execution Install the doors in accordance with Overhead Door Corporation instructions and standards, using an authorized Overhead Door Corporation distributor. *Note to specifier: This specification is a suggested guide. Available options are shown in parentheses. Installation and Service: Overhead Door Company of Glens Falls overhead door corporation 9
12 Medium-Duty Thermacore Doors SERIES The Thermacore 593 and 594 Series offer excellent thermal efficiency for mediumduty applications. The 593 Series is available with a ribbed, textured surface. The 594 Series features a raised-panel, woodgrain textured surface for a more decorative appearance. ARCHITECTURAL SPECIFICATIONS * PART 1 GENERAL Standard Features At a Glance Panel thickness 1 3/8" (35 mm) R-value (2.26 W/Msq) U-value.078 (.443 Msq/W) Air infiltration: at 15 mph (24 kmph).08 cfm (2.26 Lpm) at 25 mph (40 kmph).15 cfm (2.24 Lpm) Thermal break Hot melt Exterior steel.016" (.41 mm) galv. (593).012" (.31 mm) galv. (594) Exterior surface Ribbed, textured (593) Raised-panel, textured (594) Standard springs 10,000 cycle Std. maximum width 20'2" (6147 mm) Std. maximum height 16'1" (4902 mm) Exterior color White, Industrial brown or gray (593), Kynar white, brown or beige (593/594), White or Chestnut brown (594) Interior color White Limited warranty 10-year delamination Options Installation and Service: Overhead Door Company of Glens Falls Thermal glazing High-usage components* Higher windload package Sup-UR-Seal jamb weatherstrip Electric operator Chain hoist Posi-Tension drums Safety bottom fixture Bottom-sensing edge EPDM rubber header seal Aluminum sash section Exhaust ports 1.01 Work Included The doors will be Thermacore Series 593 or 594 as manufactured by Overhead Door Corporation Related Work Opening preparation, miscellaneous or structural metal work, access panels, finish or field painting, field electrical wiring, wire, conduit, fuses and disconnect switches are in the Scope of Work of other divisions or trades Quality Assurance In accordance with accepted quality assurance guidelines for motor-operated doors, both the Thermacore door and electric operator (optional) shall be manufactured by a single-source producer of door systems; as by Overhead Door Corporation. PART 2 PRODUCT 2.01 Sections Section profile will be ribbed, textured surface (593 Series) or raised panel, woodgrain textured surface (594 Series). Sections will be roll-formed, hot-dipped, galvanized steel exterior no less than.016" (.41 mm) for 593 Series, and no less than.012" (.31 mm) for 594 Series. Sections will be manufactured by a continuous foamed-inplace polyurethane lamination process resulting in a metal/foam/metal sandwich of homogenous polyurethane insulation. Sections (Panels) will have a thickness of 1 3/8" (35 mm) and will incorporate a thermal break to prevent heat or cold conductivity Insulation Insulation will be a rigid, foamed-in-place, polyurethane core free of CFCs and will be fully encapsulated in nonpermeable materials to prevent loss of thermal efficiency over time. The insulation will have an R-value of (2.26 W/Msq), U-value of.078 (.443 Msq/W) calculated values based on certified test data. * Refer to General Features and Benefits on inside front cover 10
13 Thermacore Door System SERIES Windload (ANSI/DASMA standards and as required by code. Consult factory for specific requirements.) 2.04 End Stiles End stiles will be 20-gauge steel Springs Standard springs will be 10,000 cycles. (25,000, 50,000, 75,000, 100,000 cycle springs are optional.) 2.06 Hardware Hinges and fixtures will be galvanized steel. Full-floating, ballbearing rollers will have hardened steel races. Roller sizes will be adequate for design requirements and limitations Track Track is 2" (51 mm) standard or (3" (76 mm) optional) and angle-mounted. (Bracket-mounted track is an option, but not available on full vertical doors.) 2.08 Lock Lock will be interior mounted slide lock. (Keyed lock) 2.09 Weatherstrip Weatherstrip between sections will be EPDM rubber tube seals fitted inside every joint. Bottom weatherstrip will be EPDM rubber bulb-type strip Finish Finish will be two-coat baked-on polyester with a white interior, and white (or Industrial brown, gray, Kynar white, brown, beige) exterior for 593 series and white (Chestnut brown or Kynar white, brown or beige) for 594 series Operation Operation will be by manual pull rope. (Optional chain hoist and electric operator are available.) PART 3 EXECUTION 3.01 Execution Install the doors in accordance with Overhead Door Corporation instructions and standards, using an authorized Overhead Door Corporation distributor. *Note to specifier: This specification is a suggested guide. Available options are shown in parentheses. Installation and Service: Overhead Door Company of Twin Falls overhead door corporation 11
14 Light-Duty Thermacore Doors SERIES 598 The Thermacore 598 Series is a quality thermal door that provides a higher level of protection against heat and cold conductivity than standard insulated doors. The 598 Series door represents an economical choice for lighter-duty applications. ARCHITECTURAL SPECIFICATIONS * 598 PART 1 GENERAL Standard Features At a Glance Panel thickness R-value U-value Thermal break Exterior steel Exterior surface Standard springs Std. maximum width Std. maximum height Exterior color Interior color Options Installation and Service: Overhead Door Company of Twin Falls Thermal glazing High cycle springs Higher windload package Electric operator Chain hoist Posi-Tension drums Header and jamb seal 1" (25 mm) 9.31 (1.64 W/Msq).107 (.608 Msq/W) Hot melt.012" (.31 mm) galv. Ribbed, textured 10,000 cycle 16'2" (4,928 mm) 14'1" (4,293 mm) White White 1.01 Work Included The doors will be Thermacore Series 598 as manufactured by Overhead Door Corporation Related Work Opening preparation, miscellaneous or structural metal work, access panels, finish or field painting, field electrical wiring, wire, conduit, fuses and disconnect switches are in the Scope of Work of other divisions or trades Quality Assurance In accordance with accepted quality assurance guidelines for motor-operated doors, both the Thermacore door and electric operator (optional) shall be manufactured by a single-source producer of door systems; as by Overhead Door Corporation. PART 2 PRODUCT 2.01 Sections Section profile will be a ribbed, textured surface. Sections will be roll formed, hot-dipped, galvanized steel exterior no less than.012" (.31 mm). Sections will be manufactured by a continuous foamed-in-place polyurethane lamination process resulting in a metal/foam/metal sandwich of homogenous polyurethane insulation. Sections (Panels) will have a thickness of 1" (25 mm) Insulation Insulation will be a rigid, foamed-in-place, polyurethane core free of CFCs and will be fully encapsulated in nonpermeable materials to prevent loss of thermal efficiency over time. The insulation will have an R-value of 9.31 (1.64 W/Msq), U-value of.107 (.608 Msq/W) calculated values based on certified test data Windload (ANSI/DASMA standards and as required by code. Consult factory for specific requirements.) 12
15 Thermacore Door System SERIES End Stiles End stiles will be 20-gauge steel Springs Standard springs will be 10,000 cycles. (25,000, 50,000, 75,000, 100,000 cycle springs are optional.) 2.06 Hardware Hinges and fixtures will be galvanized steel. Full-floating, ballbearing rollers will have hardened steel races. Roller sizes will be adequate for design requirements and limitations Track Track is 2" (51 mm) standard and angle mounted. (Bracketmounted track is an option, but not available on full vertical doors.) 2.08 Lock Lock will be interior mounted slide lock. (Keyed lock) 2.09 Weatherstrip Bottom weatherstrip will be EPDM rubber bulb-type strip Finish Finish will be two-coat baked-on polyester with a white interior and white exterior Operation Operation will be by manual pull rope. (Optional chain hoist and electric operator are available.) PART 3 EXECUTION 3.01 Execution Install the doors in accordance with Overhead Door Corporation instructions and standards, using an authorized Overhead Door Corporation distributor. *Note to specifier: This specification is a suggested guide. Available options are shown in parentheses. Installation and Service: Overhead Door Company of Southwestern Idaho overhead door corporation 13
16 Track Detail Any of the following track configurations can be selected for all Thermacore Series Models. O.H.=Opening Height L.C.=Lift Clearance D.H.=Door Height Standard Lift Track Lift Clearance Track Standard Full Vertical Track 2 (51 mm) Track [15 (381 mm) Radius] Door Height Centerline of Shaft Minimum Headroom Thru 12 0 (3658 mm) O.H /8 (295 mm) 14 1/4 (362 mm) Thru 16 0 (4877 mm) O.H /8 (321 mm) 20 1/2 (521 mm) 3 (76mm) Track [15 (381 mm) Radius] Thru 18 0 (5486 mm) O.H /8 (372 mm) Thru 32 0 (9754 mm) O.H /8 (429 mm) 18 (457 mm) 21 1/2 (546 mm) Low Headroom Track Springs to Front 2 (51 mm) Track [15 (381 mm) Radius] Door Height Centerline of Shaft Minimum Headroom Thru 12 0 (3658 mm) O.H.+L.C.+5 5/8 (143 mm) L.C.+ 8 3/4 (222 mm) Thru 16 0 (4877mm) O.H.+L.C.+5 5/8 (143 mm) L.C.+11 1/4 (286 mm) 3 (76 mm) Track [15 (381 mm) Radius] Thru 22 0 (6706 mm) O.H.+L.C.+6 5/8 (168 mm) L.C.+11 1/2 (292 mm) Thru 32 0 (9754 mm) O.H.+L.C.+6 5/8 (168 mm) L.C.+12 1/4 (311 mm) 2 (51 mm) Track [15 (381 mm) Radius] Door Height Centerline of Shaft Minimum Headroom Thru 11 0 (3353 mm) O.H.+O.H.+ 3/8 (10 mm) O.H.+101/4 (260 mm) Thru 16 0 (4877 mm) O.H.+O.H.+3/8 (10 mm) O.H.+101/4 (260 mm) 3 (76 mm) Track [15 (381 mm) Radius] Thru 18 0 (5486 mm) O.H.+O.H.+3/8 (10 mm) Low Headroom Track Springs to Rear O.H.+101/4 (260 mm) 2 (51 mm) Track [15 (381 mm) Radius] Door Height Centerline of Shaft Minimum Headroom Thru 12 0 (3658 mm) D.H. + 8 (203 mm) 11 3/4 (299 mm) Thru 16 0 (4877 mm) D.H. + 8 (203 mm) 12 1/2 (318 mm) 3 (76 mm) Track [15 (381 mm) Radius] Thru 12 0 (3658 mm) D.H. + 9 (229 mm) 13 (330 mm) Thru 18 0 (5486 mm) D.H. + 9 (229 mm) 13 3/4 (349 mm) 2 (51 mm) Track [15 (381 mm) Radius] Door Height Centerline of Shaft Minimum Headroom Thru 12 0 (3658 mm) O.H. + 2 (51 mm) 71/2 (191 mm) Thru 16 0 (4866 mm) O.H. + 2 (51 mm) 8 (2 03 mm) 3 (76 mm) Track [15 (381 mm) Radius] Thru 18 0 (5486 mm) O.H.+ 6 3/4 (171 mm) 9 3/4 (2 48 mm) Additional headroom required for drawbar operation. Consult your local Overhead Door Distributor. 14
17 Framing & Pad Detail Thermacore Door System Framing and pad details for common installation of Thermacore doors in steel, wood, concrete and masonry jambs are provided here. If you require additional information or have special project requirements, refer to the Overhead Door Architectural Design Manual, or consult with the Overhead Door Applications Engineering Group or your local Overhead Door distributor. Steel Jambs Wood Jambs Concrete/Masonry Jambs 2" (51 mm) Track 2" (51 mm) Track 2" (51 mm) Track 3" (76 mm)* Track 3" (76 mm)* Track 3" (76 mm)* Track Minimum Required Sideroom Track Type 2 Track (51 mm) 3 Track (76 mm)* Standard Lift 4 1/2" (114 mm) 6 1/2 (165 mm) Low Headroom 9" (229 mm) 10" (254 mm) Lift Clearance 4 1/2" (114 mm) 6 1/2"(165 mm) Full Vertical 4 1/2" (14 mm) 6 1/2"(165 mm) Minimum Required Sideroom Track Type 2 Track (51 mm) 3 Track (76 mm)* Standard Lift 3 1/2" (8 9 mm) 5 1/2 (140 mm) Low Headroom 8" (203 mm) 9" (229 mm) Lift Clearance 3 1/2" (8 9 mm) 5 1/2 (140 mm) Full Vertical 3 1/2" (8 9 mm) 5 1/2 (140 mm) Minimum Required Sideroom Track Type 2 Track (51 mm) 3 Track (76 mm)* Standard Lift 4 1/2" (114 mm) 6 1/2 (165 mm) Low Headroom 9" (229 mm) 10" (254 mm) Lift Clearance 4 1/2" (114 mm) 5 1/2 (140 mm) Full Vertical 4 1/2" (114 mm) 5 1/2 (140 mm) * 3" (76 mm) track not available with 598 Series. overhead door corporation 15
18 Electric Operators Operator Control Options Push-button, key or combination stations; surface- or flush-mounted for interior and/or exterior locations Vehicle detectors, key card reader, photocell and door timer controls Treadle or pull switch stations Telephone entry and coded keyboard stations Universal programmable door timer Commercial light package Radio control systems (24 VAC or 120 VAC ) Explosion and dust ignition-proof systems Electric Operator Selection Guide S Horsepower Max. height of door Armor Drive 1/2, 1 HP 32' 3000 c c T,S,C (9753 mm) (1360 kg) Model SDB+ 1, 2 HP 28' 3080 c c c c c S,C (8534 mm) (1397 kg) Model L+ 1/3, 1/2, 28' 1650 c c c c c T,S,C 3/4 HP (8534 mm) (748 kg) Model JST+ 1/3, 1/2, 24' 1450 c c c c T,S,C 3/4 HP (7315 mm) (657 kg) Model SEL+ 1/3,1/2 HP 18' 940 c c c T,S (5486 mm) (426 kg) Model MD 1/2 HP 14' 620 c T,S (4267mm) (281 kg) Mounting Options: T = Trolley S = Side mount C = Center mount Entrapment Protection The installation of an external reversing device for all electrically operated commercial doors is recommended. If a sensing edge or other reversing device is not installed, a constant-contact control switch must be used to close the door. We recommend a four-wire, fail-safe electric sensing edge that will not allow the door to close if the sensing edge is damaged or not working properly. NEW Operator Model ArmorDrive The ArmorDrive comes available with a 1/2 hp or 1 hp motor. This full-featured, modular door control system lifts every door in our commercial and industrial lines from sectional doors and security grilles to the largest rolling steel service door. Customized mounting kits accommodate your specific door type, configuration and installation scenario. Max. weight of door V-belt 6-rib poly J-belt Worm gear Planetary Gears Adjustable clutch Totally enclosed Continuous duty Explosion proof Mounting type Overhead Door Corporation offers the broadest line of electric operators to suit new construction and retrofit applications, as well as unusual or special requirements. Manufactured by Overhead Door Corporation to meet the exacting performance requirements of Overhead Door s upwardacting doors, our ribbon branded operators afford precise control of door action for years of trouble-free operation. In order to improve safety and enhance door and motor life, industry quality assurance guidelines recommend the choice of a single manufacturer for both door and operator applications. Overhead Door Corporation is the only national manufacturer of a full line of commercial and industrial doors and operators specifically designed for integral applications. Operator Models Model SDB+ Model SDB+ is a heavy-duty commercial operator designed to operate doors up to 28' (8,534 mm) in height and 3,080 pounds (1,399 kg). It is available as either a side-mounted or centermounted unit. Model L+ Model L+ is a heavy-duty commercial operator designed to operate doors up to 28' (8,534 mm) in height and 1,650 pounds (784 kg). It is available as a trolley-type (20:1 gear ratio), or side-mounted or center-mounted unit (40:1 gear ratios). Model JST+ Model JST+ is a standardduty operator designed to operate doors up to 24' (7,315 mm) in height and 1,450 pounds (658 kg). It is available as a trolley-type, sidemounted, or center-mounted unit. 16
19 Thermacore Door System Model SEL+ Model SEL+ is a standard-duty operator designed to operate doors up to 18' (5,486 mm) in height and 940 pounds (426 kg). It is available as a trolley-type or side-mounted unit. Model MD Model MD is a limited-duty operator designed to operate doors up to 14' (4,267 mm) in height and 620 pounds (281 kg). It includes an internal electronic reversing system that will reverse a closing door upon detection of an obstruction. It is available as a trolley-type or side-mounted unit. Trolley-type (Drawbar) operators feature a power unit mounted between, above and to the rear of the horizontal tracks. The drawbar drive provides positive control of the door at all times, making this operator the preferred choice whenever possible. Maximum door width is 20' per drawbar. Available on Models JST+, SEL+, L+, MD, and ArmorDrive. Trolley-type (Drawbar) JST+, SEL+, L+, MD, ArmorDrive Mounting Details Side-mounted (jackshaft) operators feature a power unit mounted on the inside front wall and connected to the crosshead shaft, with an adjustable coupling or drive chain and sprockets. Available on models MD, SEL+, JST+, SDB+, L+, and ArmorDrive. Side Mount Type MD, SEL+, JST+, SDB+, L+, ArmorDrive Center-mounted (jackshaft) operators feature a power unit on the front wall above the door opening. No additional backroom is required. Available on models JST+, L+, SDB+ and ArmorDrive. Center Mount/Jackshaft Type JST+, L+, SDB+, ArmorDrive Maximum Headroom Requirements MD Track Requirements + 3 3/4" (95 mm) SEL+ Track Requirements + 4" (102 mm) JST+ Track Requirements + 5 1/2" (140 mm) L+ Track Requirements + 4 3/4" (121 mm) See page 6 for track details Depth Requirements - A Dimension (Backroom) MD Door Height + 3' 10" (1168 mm) SEL+ Door Height + 4' 0" (1219 mm) JST+ Door Height + 4' 2" (1295 mm) L+ Door Height + 6' 1" (1854 mm) A Dimension - Minimum (Sideroom) 2" (51mm) Track 3" (76mm) Track MD 15 3/4" (400 mm) SEL+ 20" (508 mm) 21" (533 mm) JST+ 20" (508 mm) 21" (533 mm) L+ 23" (584 mm) 24" (610 mm) SDB+ 26" (660 mm) 26 (660 mm) Maximum Headroom Requirements JST+ Track Requirements + 14" (356 mm) L+ Track Requirements /4" (273 mm) SDB+ Track Requirements + 23" (584 mm) See page 6 for track details overhead door corporation 17
20 The Original, lnnovative Choice for Unequalled Quality and Service Overhead Door Corporation pioneered the upward-acting door industry, inventing the first upwardacting door in 1921 and the first electric door operator in Today, we continue to be the industry leader through the strength of our product innovation, superior craftsmanship and outstanding customer support, underscoring a legacy of quality, expertise and integrity. That s why design and construction professionals specify Overhead Door Corporation products more often than any other brand. The red Overhead Door Ribbon is a mark of quality that also reflects the pride we take in the people who support our products. Our family of over 400 Ribbon distributors across the country not only share our name and logo, but also our commitment to excellence. Your Ribbon distributor will work with you in a consultative role to ensure that product selections achieve your design and application requirements in addition to providing expert installation, professional field service and ongoing maintenance. From project design and manufacturing to installation and service, the Overhead Door Ribbon is your guarantee of genuine quality and turnkey service excellence. Together with our Ribbon distributors, we offer comprehensive technical information and resource materials to support your project, including: Architectural Design Manual a comprehensive guide to selecting, specifying and detailing all commercial and industrial Overhead Door products Sweet s Catalog for selection information about our products, and Sweet s CD and CD-CAD for convenient electronic product information, technical specifications, and details with CAD cut- and-paste capability Operation & Maintenance Manual detailed product information, customized for your project, to ensure reliable, long-life door system operation Custom design and technical assistance through our Corporate Application Engineering Teams JetRoll High Speed Doors Fire Doors Rolling & Side Folding Security Grilles & Closures Rolling Service Doors Today, Overhead Door Corporation as well as its divisions, which include W.B. McGuire Co. for loading dock equipment and impact traffic doors, and Horton Automatics for automated pedestrian entrances is recognized as the leading, single-source manufacturer of integrated door and operator systems for commercial, industrial and residential applications. With multiple manufacturing locations throughout the United States, a state-of-the-art International Technical Center for design and engineering, and a national network of authorized Ribbon distributors, our capabilities are leading-edge and our field service and technical support second to none. Built best and backed best, Overhead Door is the industry s leading choice for quality that shows and lasts. To talk with the Overhead Door Distributor nearest you, call DOOR. Overhead Door Corporation 2501 S. State Hwy. 121 Lewisville, Texas (800) Telephone Overhead Door Corporation C M 12/06 JAR INDUSTRY LEADING COMMERCIAL & INDUSTRIAL SOLUTIONS The Overhead Door Corporation family of quality commercial and industrial products includes: A part of Sanwa Shutter Corporation Consistent with our policy of continuing product improvement, we reserve the right to change product specifications without notice or obligation
Rolling SheetDoor Systems
ProStar Rolling SheetDoor Systems 790CW COMMERCIAL WINDLOAD Product Line SERIES 780CD COMMERCIAL DOOR 770SS SELF-STORAGE INDUSTRY LEADING COMMERCIAL & INDUSTRIAL SOLUTIONS An Economical Solution for Easy
More informationSeries - 1
SECTION 08360 SECTIONAL OVERHEAD DOORS 591 SERIES THERMACORE INSULATED STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click
More informationSECTION SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS. Display hidden notes to specifier. (Don't know how?
SECTION 08360 SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Glazed Aluminum
More informationSECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Doors B. Track and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry.
More informationSeries - 1
SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
More informationPage 1 PRODUCT DESCRIPTION SECTION SECTIONAL OVERHEAD DOORS MODEL 900 PRODUCT FEATURES
2016-03-24 Page 1 SECTION 08360 SECTIONAL OVERHEAD DOORS DESCRIPTION MODEL 900 PRODUCT FEATURES Sectional steel overhead doors, industrial grade heavy duty construction. BASIC USES / RELATED USES Sectional
More informationSection SECTIONAL INSULATED STEEL DOORS
1 GENERAL 1.1 GENERAL REQUIREMENTS General Conditions and Division 01 apply to this section. 1.2 RELATED WORK Section 05500: Miscellaneous Metal Fabrication Section 07900: Joint Sealers Section 09900:
More informationSECTIONAL DOOR SYSTEMS
SECTIONAL DOOR SYSTEMS ThermoMark Model 5155»» INSULATED SECTIONAL STEEL»» NON-INSULATED SECTIONAL STEEL»» ALUMINUM FULL-VIEW COMMERCIAL SECTIONAL DOORS Wayne Dalton offers a complete line of Commercial
More informationTC Series. Commercial Sectional TC Series
Commercial Sectional TC Series TC Series Thermal Sectional Doors With a proven track record for thermal efficiency and extreme durability, Raynor TC Series is simply the best you can specify. With extruded
More informationTHERMAL SECTIONAL DOORS. Raynor TC300, white, with oval windows. Visit us at: Call: RAYNOR
THERMAL SECTIONAL DOORS Raynor TC300, white, with oval windows Visit us at: www.raynor.com Call: 1-800-4-RAYNOR With a proven track record for thermal efficiency and extreme durability, Raynor TC Series
More information800 Series Aluminum Overhead Doors, by Northwest Door Section ALUMINUM SECTIONAL DOORS Digicon Information Inc.
Digicon Information Inc. Page 1 This section includes Model 800 aluminum insulated overhead sectional doors manufactured by Northwest Doors, with manual, chain or electric operation, with our without windows.
More informationTherma Series Insulated Overhead Doors, by Northwest Door Section SECTIONAL DOORS Digicon Information Inc.
Digicon Information Inc. Page 1 This section includes Model 650, 308, 308TM steel insulated overhead sectional doors manufactured by Northwest Doors, with manual, chain or electric operation, with our
More informationHIGH PERFORMANCE DOORS. Speed-Guardian High performance / speed doors Diverse models for various industries and applications
HIGH PERFORMANCE DOORS Speed-Guardian 4000 High performance / doors Diverse models for various industries and applications The Speed-Guardian 4000 German engineered, American made - A cutting edge door
More informationThermacore COLLECTION
Thermacore COLLECTION Premium insulated garage doors deliver maximum thermal efficiency and design flexibility. Image above: Model 194 8 high, Standard panel, White finish, Stockton 1 windows Cover image:
More informationA clear vision of what you imagined
A clear vision of what you imagined PUR DESIGN 100AD-200AD-300AD Commercial panoramic door JPR s PUR DESIGN Series doors are manufactured to meet the highest standards of performance and aesthetics. Designed
More informationSECTION OVERHEAD COILING FIRE DOORS MODEL 662 OVERHEAD COILING COUNTER FIRE DOORS WITH INTEGRAL FRAME
SECTION 08331 OVERHEAD COILING FIRE DOORS MODEL 662 OVERHEAD COILING COUNTER FIRE DOORS WITH INTEGRAL FRAME Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES
More informationSECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 [08 33 13] COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Metal Counter
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-08 36 13 (August 2011) Change 1-05/13 --------------------------- Preparing Activity: NAVFAC Superseding UFGS-08 36 13 (July 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationThe S.10 ALL ALUMINUM LIFT & SLIDE DOOR SYSTEM. Expanding spaces to the extraordinary
The S.10 ALL ALUMINUM LIFT & SLIDE DOOR SYSTEM Expanding spaces to the extraordinary Overview Elevation View of a 4-panel Lift & Slide Door System - Stacked Configuration Panda s Lift & Slide Door Systems
More informationSLIDING PATIO DOOR DESIGNS REHAU SYSTEM Construction Automotive Industry
SLIDING PATIO DOOR DESIGNS REHAU SYSTEM 2200 www.rehau.com Construction Automotive Industry THE NEXT GENERATION OF PATIO DOOR PERFORMANCE DRIVEN DESIGN WITH STYLISH APPEAL 2 The REHAU System 2200 sliding
More informationSECTION ACCORDION FOLDING PARTITIONS
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 10 22 26.13 ACCORDION FOLDING PARTITIONS SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
More informationWestgate Entrematic, Parking Security Gates Section OVERHEAD SECURITY GATE Prepared by: Digicon Information Inc. Page 1
Prepared by: Digicon Information Inc. Page 1 This section includes overhead type Parking Security Gates, as manufactured by Westgate Entrematic, a division of Helton Group of Companies. DISCLAIMER: This
More informationMechanical Loading Dock Levelers
Mechanical Loading Dock Levelers With over 30 years of experience manufacturing quality loading dock equipment, Pentalift is your single-source supplier for loading dock levelers, dock lifts, dock seals
More informationEFFICIENT AND SAFE GOODS FLOW FOR COMMERCIAL ENVIRONMENTS
EFFICIENT AND SAFE GOODS FLOW FOR COMMERCIAL ENVIRONMENTS KONE high-speed doors HOW TO CHOOSE THE OPTIMAL SOLUTION FOR YOUR BUILDING Select: 1. The door type that meets your requirements 2. The frame material
More informationFoldingAccess Series Aluminum Folding Door System
HORTON AUTOMATICS - ARCHITECTURAL SPECIFICATIONS, 1/2008 FoldingAccess Series 4-4200 Aluminum Folding Door System DIVISION 08 - OPENINGS SECTION 08 42 29.13 FOLDING AUTOMATIC ENTRANCES Specifier Note:
More informationFOUR FOLD DOORS-WITH SINGLE OVERHEAD MTD OPERATOR
FOUR FOLD DOORS-WITH SINGLE OVERHEAD MTD OPERATOR Section 083713- Four Fold Doors- With Single Overhead Mounted Operator Part 1-General 1.1 Related Document: A. Drawing and general provisions of contract,
More informationSECTIONAL GARAGE DOORS
SECTIONAL GARAGE DOORS 7 1 ULTIMATE LIFESPAN OF DOOR SPRINGS Ultimate service life of springs is guaranteed, this means the door can run up and down up to 25,000 times.this is equivalent to 17 years of
More informationVinyl Windows and Doors
Install Atrium 0UZ[PSS *VUÄKLUJL Vinyl Windows and Doors Atrium Vinyl Windows A Commitment to Excellence Since 1948 Welcome the beauty of The Vinyl Advantage Vinyl is the ideal material for engineering
More informationPREMIUM SERIES CLASSIC LINE
PREMIUM SERIES CLASSIC LINE Model 9200, Short Elegant Panel with Optional Colonial 509 Window Design clopay.com CLASSIC LINE PREMIUM SERIES Model 9203 Long Elegant Panel with Optional Charleston 608 Window
More informationVPL-3200B Residential Vertical Platform Lift Technical Specifications
Page 1 of 5 VPL-3200B Residential Vertical Platform Lift Technical Specifications MODEL NUMBER: VPL-3200B Series: Models VPL-3210B, VPL-3212B and VPL-3214B (DC-powered units) U.S. F.D.A. CLASSIFICATION:
More informationGLASS WALL SPECIFICATIONS
GLASS WALL SPECIFICATIONS Series GA2 Ultra Acoustical, STC 45/46 Paired, Glass Wall PRODUCT OVERVIEW: Top Supported Center Stack Paired s Manually Operated Maximum Opening Height: 12' 2 [3.7m] Maximum
More informationINDUSTRIAL GUARDRAIL SYSTEMS
INDUSTRIAL GUARDRAIL SYSTEMS STRONGEST GUARDRAIL ON THE MARKET MANUFACTURED IN THE U.S.A. BEST PRICES MOST VARIETIES HEAVY DUTY ONE-LINE OR TWO-LINE Posts: 4 Sched 80 pipe Rail: 6 Sched 40 pipe Sleeved
More informationSERIES DESCRIPTION MODEL PAGE
Storm Window Index Exterior storm window features increased durability and ultimate thermal protection. Performance Exterior storm window offers more standard features than other storm windows on the market.
More informationA. Submit the following in addition to the standard requirements.
SECTION [13120] OMNIFLEX 300 MODULAR WALL SYSTEM SECTION 1 GENERAL 1.01 SECTION INCLUDES A. This Section specifies all requirements necessary to furnish and install a complete modular wall system including,
More informationAJONES AIRWAYS, LLC CLEVELAND REGIONAL JETPORT Sliding Hangar Doors SBA SECTION SLIDING HANGAR DOORS
CLEVELAND REGIONAL JETPORT 08 3430-1 PART 1 - GENERAL 1.1 SUMMARY: SECTION 08 3430 SLIDING HANGAR DOORS A. Work of this section includes door leaves 19'-0" + wide by 28'-0" high, floating group door system,
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 12 2113 - LOUVER BLINDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationmediatek mediatek Library and archive shelving systems Taking shelving to the next level BC004.03
mediatek Library and archive shelving systems Taking shelving to the next level BC004.03 mediatek Library and archive shelving systems The Mediatek range of shelving is designed to offer space efficient
More informationCustom fabrication in two weeks or less, guaranteed.
Custom fabrication in two weeks or less, guaranteed. Ask us how Ramco can now fabricate hardware on all manufacturers blank doors in 2 weeks or less. ramcometals.com got lead times? Ramco offers custom
More informationAccordion Doors / Zone 2. Woodfold Accordion Door Guide for Commercial and Residential Installations Detailed Architectural Shop Drawings Available
SINCE 1957 Accordion Doors / Zone 2 Woodfold Accordion Door Guide for Commercial and Residential Installations Detailed Architectural Shop Drawings Available Suggested List Prices / All Continental States
More informationSECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS PART 1 GENERAL PART 1.1 SECTION INCLUDES A. Overhead doors. B. Bi-fold doors. PART 1.2 RELATED SECTIONS A. Section 03300 - Cast-In-Place Concrete: Prepared opening
More information/CHI BUYLINE Rolling Steel. Buyer s Guide THE DOOR TO QUALITY.
C O M M E R C I A L R O L L I N G S T E E L D O O R S 08 33 00/CHI BUYLINE 4676 Rolling Steel Buyer s Guide THE DOOR TO QUALITY. CONTENTS for Commercial Rolling Steel Doors 4... 6000 NON-INSULATED SERVICE
More informationB. Polyethylene samples shall be submitted for Owner approval of color and quality.
Glass Rail ENGINEERED DASHERBOARD SPECIFICATIONS PART 1 - GENERAL 1.01 PROJECT SCOPE A. Contractor shall furnish and install one complete set of steel framed dasherboards as indicated on the drawings and
More informationCLASSIC COLLECTION PREMIUM. series. Model 9200, Short Elegant Panel with Optional Colonial 509 Window Design. clopay.com
CLASSIC COLLECTION PREMIUM series Model 9200, Short Elegant Panel with Optional Colonial 509 Window Design clopay.com INTELLICORE INSULATION TECHNOLOGY Premium Series garage doors featuring Intellicore
More informationPREMIUM SERIES CLASSIC LINE
PREMIUM SERIES CLASSIC LINE Model 9200, Short Elegant Panel with Optional Colonial 509 Window Design clopay.com CLASSIC LINE PREMIUM SERIES Model 9203 Long Elegant Panel with Optional Charleston 608 Window
More informationTIE Aluminum Guide Spec: Thermally Improved Windows & Doors
TIE Aluminum Guide Spec: Thermally Improved Windows & Doors Thermally Improved Aluminum Windows (TIE) ALUMINUM WINDOWS - 08 51 13 With the thin lines that Milgard s TIE Aluminum Windows provide, they
More informationThis guide can be used to prepare a specification for incorporating free standing jib cranes into a competitively bid construction project.
SECTION 14651 FREE STANDING JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station and industrial
More informationSeries 3000 Pocket Doors
Series 3000 Pocket Doors Introduction: The following three (3) part specification offers the Standard and Optional features for the Series 3000 Pocket Doors. The yellow highlighted areas in the specification
More informationCasement Window Designs. Construction Automotive Indusry
Casement Window Designs SYSTEM 1400 www.rehau.com Construction Automotive Indusry System 1400 VERSATILE ENOUGH TO ACCOMMODATE UPSCALE RESIDENTIAL AND COMMERCIAL APPLICATIONS Window Types Fixed windows,
More informationPAINT BOOTHS LARGE EQUIPMENT
PAINT BOOTHS LARGE EQUIPMENT 1 THE FINISHING TOUCH A flawless paint finish can make a product stand out from the rest. With precise contamination control and excellent lighting, Large Equipment Booths
More informationSECTION LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM
Page 1 of 6 SECTION 08 32 20 LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS SLIDING DOORS. SECTION INCLUDES OVERHEAD SLIDING TUBE ASSEMBLY, MOUNTING
More informationNote: Any verbiage written in red needs to be specified. All other options should be deleted
Note: Any verbiage written in red needs to be specified. All other options should be deleted KYLER SCREENLINE BLIND SPECIFICATION PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions
More informationHD-Swing Series 4000 Heavy Duty Aluminum Swing Door System with Electric Operator
HORTON AUTOMATICS - ARCHITECTURAL SPECIFICATIONS, 1/2008 HD-Swing Series 4000 Heavy Duty Aluminum Swing Door System with Electric Operator DIVISION 08 - OPENINGS SECTION 08 42 29.33 SWINGING AUTOMATIC
More information3000 SERIES POCKET DOOR
3000 SERIES POCKET DOOR KWIK-WALL... One Source for Wall Systems. KWIK-WALL s s for the 3000 Series - Steel Panel operable wall systems answer the challenge for space division needs posed by multi-purpose
More informationMARLIN WINDOWS, INC 3500 HC SERIES 3 3 8" SLIDING WINDOW PAGE 1
PAGE 1 SPECIFICATIONS GENERAL Sliding windows shall be Marlin series #3500-HC (thermally improved) as manufactured by Marlin windows, and shall conform to ANSI/AAMA 101-88 HS-HC40. Series #3500 shall have
More informationGLASS WALL SPECIFICATIONS
GLASS WALL SPECIFICATIONS Series GA1 Ultra Acoustical, STC 45/46, Omni, Glass Wall PRODUCT OVERVIEW: Top Supported Side Stack Individual, Omni-Directional s Manually Operated Maximum Opening Height: 12'
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-10 71 13.13 (April 2006) ----------------------------- Preparing Activity: NAVFAC Replace without change UFGS-10716 (August 2004) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationG. UNDERWRITERS LABORATORY, INC.: 1. UL 325: Electrical Door, Drapery, Gate, Louver, and Window Operators and Systems
B6.0 DIVISION 8 - DOORS AND WINDOWS SECTION 08460 - AUTOMATIC ENTRANCE DOORS Specifier Note: Coordinate and edit articles and paragraphs below to suit project requirements. Add section numbers and titles
More informationTraditional Steel COLLECTION
Traditional Steel COLLECTION Legendary performance and durability at a great value. Select your door panel style and color Customize your door with color and windows Customize your door with windows Model
More informationHD-Slide Series 2001 Heavy Duty Aluminum Sliding Door System with Electric Belt Drive Operator
HORTON AUTOMATICS - ARCHITECTURAL SPECIFICATIONS, 1/2008 HD-Slide Series 2001 Heavy Duty Aluminum Sliding Door System with Electric Belt Drive Operator DIVISION 08 - OPENINGS SECTION 08 42 29.23 SLIDING
More informationUNIFIED FACILITIES GUIDE SPECIFICATION
USACE / NAVFAC / AFCEC / NASA UFGS-08 34 19.10 20 (February 2012) ----------------------------------- Preparing Activity: NAVFAC Superseding UFGS-08 34 19.10 20 (April 2006) UNIFIED FACILITIES GUIDE SPECIFICATION
More informationOPERABLE PARTITIONS. Signature
OPERABLE PARTITIONS Signature 8000 SIGNATURE 2 WHO WE ARE Moderco is an international manufacturer of Manual & Electric Operable Partitions, Accordion Doors, Glass Wall Systems, and Gymnasium Dividers.
More informationA. Product Data shall be provided for each type of product indicated.
32 31 13 CHAIN LINK FENCES AND GATES SECTION 1 GENERAL 1.1 SUMMARY This Section includes the following: 1. Chain Link Fences 2. Gates for Chain Link Fences. See electrical specifications for electrical
More informationA FOLDING DOOR SERIES BY ROYAL
A FOLDING DOOR SERIES BY ROYAL The perfect space solution Overture in music is the term originally applied to the instrumental introduction to an opera. During the early Romantic era, composers such as
More informationResidential Garage Doors Miami-Dade Hurricane Ready. Miami-Dade Hurricane Ready Residential Garage Doors
Residential Garage Doors Miami-Dade Hurricane Ready Miami-Dade Hurricane Ready Residential Garage Doors 800-472-9667 www.raynor.com Miami-Dade Hurricane Ready Hurricane Ready Residential Garage Doors Determine
More informationspeciality doors & tilt fittings
speciality doors & tilt fittings Flex-A-Door Design-A-Door Tilt-A-Dor Track Fittings Jamb Fittings Natural Timber Doors Timberpanel Craftpanel Product Code R1X sliding overhead garage door size range Available
More informationModularity. Flexibility is maximized with basic modular components that combine to create many configurations.
Product Specification Document Date Published: September 17, 2004 AXIOM CONSOLE ABOUT AXIOM CONSOLE The ultimate in affordable modularity, the Axiom console family with its space age, structural polymer
More informationHIGH MAST CAMERA POLE ASSEMBLY GENERAL
10-3.24 HIGH MAST CAMERA POLE ASSEMBLY GENERAL The Contractor must furnish and install the following equipment for high mast camera pole assembly as described herein and as shown on the plans: 1. Camera
More informationOVERSHOT GATE TECHNICAL DATA SHEET
FRESNO OVERSHOT GATE TECHNICAL DATA SHEET Applications Fresno Overshot Gates effectively control upstream and downstream levels of canals. Improved flow control is achieved through the use of this fully
More information3275 & 3275U, 3285 & 3285U Vertical Sliding, Double-Hung Windows
3275 & 3275U, 3285 & 3285U Vertical Sliding, Double-Hung Windows 3000 SERIES FIBERGLASS - Min 1 6 2 9 Max 4 0 7 0 - Min 3 0 2 9 Max 8 0 7 0 Double-Hung Double Double-Hung - Min 4 6 2 9 Max 12 0 7 0 Minimum
More informationindustrial & commercial rolling doors
industrial & commercial rolling doors Roll-A-Door Series 3 Mini Warehouse Model Mini Warehouse Model E Firmadoor High Wind Doors Roll-A-Door Series 1 Roll-A-Door R2I traditional industrial type roller
More information2000 POCKET DOOR TECHNICAL DATA
2000 POCKET DOOR TECHNICAL DATA KWIK-WALL... One Source for Wall Systems. KWIK-WALL s s for the 2000 Series - Steel Panel operable wall systems answer the challenge for space division needs posed by multi-purpose
More informationDIVISION 8 DOORS & WINDOWS
Section Title 08000 GENERAL INFORMATION 08100 HOLLOW METAL DOORS AND FRAMES 08110 Steel Doors and Frames Door Frames Doors 08200 WOOD AND PLASTIC DOORS 08250 Door Opening Assemblies 08300 SPECIAL DOORS
More informationDICTATOR Lift Shaft System
DICTATOR Lift Shaft System The Modular Lift Shaft System, also for Retrofitting Certified According to EN 1090 A lift is becoming more and more important for daily life, not only in newly constructed buildings
More informationHomeMaker3 Windows and Doors
HomeMaker3 Windows and Doors A Better Experience We re so much more than windows OUR MISSION: GETTING IT RIGHT EVERY TIME As one of the nation s largest suppliers of high-quality windows for existing and
More informationMODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS
MODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS Ideal for applications requiring space division, visibility and security Used in bank lobbies, offices, conference areas, interior storefronts and arena skyboxes
More informationINSULATED PANEL OVERVIEW
INSULATED PANEL OVERVIEW Our various series of wall and roof panels are filled with non CFC polyisocyanurate foam. The panels are manufactured in a uniform pressure laminating process that bonds metal
More informationSection BUILDINGS, SHELTERS, ENCLOSURES
Section 13121 BUILDINGS, SHELTERS, ENCLOSURES Part 1 GENERAL 1.1 SECTION INCLUDES 1.2 A. Pre-engineered buildings. B. Pre-engineered shelters. C. Pre-engineered enclosures. D. Electrical wiring and devices
More informationSPECIFICATION GUIDE SLIDING CLOSET DOOR PART 1 - PRODUCT
SPECIFICATION GUIDE SLIDING CLOSET DOOR INTERIOR SLIDING GLASS DOOR PART 1 - PRODUCT 1.1 MANUFACTURER A. COXUSA 4755 E. Zinfandel Court, Suite D Ontario, California 91761 909.545.8900 eddie.coxusa@icloud.com
More informationSPECIFICATIONS FOR THE INSTALLATION OF REDUCED PRESSURE BACKFLOW PREVENTERS AND CONCRETE VAULTS FOR METERS 4 AND LARGER
SPECIFICATIONS FOR THE INSTALLATION OF REDUCED PRESSURE BACKFLOW PREVENTERS AND CONCRETE VAULTS FOR METERS 4 AND LARGER Updated January 2018 RP-2 Installation Specifications 1. In W.H.U.D s service area
More informationThis guide can be used to prepare a specification for incorporating free standing jib cranes into a competitively bid construction project.
GORBEL PRODUCT SPECIFICATIONS 2010 Gorbel, Inc., P.O., Box 593, Fisher, New York 14453-0593 PHONE: 800-821-0086, FAX: 585-924-6273; WEBSITE: www.gorbel.com November SECTION 41 22 31PRIVATE FREE STANDING
More informationAwning Windows Montecito New Construction Window
Awning Windows Montecito New Construction Window Full awning Double-top awning Double awning Double-bottom awning FULL DOUBLE BOTTOM/TOP DOUBLE AWNING - Min 1 3 1 4 Max 4 6 3 0 AWNING - Min 3 0 1 6 Max
More informationSpecifications PRE ASSEMBLED DOOR SPECIFICATION PART 1 GENERAL 1.01 SUMMARY
PRE ASSEMBLED DOOR SPECIFICATION PART 1 GENERAL 1.01 SUMMARY A. This section pertains to items known commercially as a complete door opening assemblies. B. Complete door opening assemblies includes a door,
More informationCasement Windows Montecito New Construction Window
Casement Windows Montecito New Construction Window Full casement Double-bottom casement FULL DOUBLE/SINGLE DOUBLE CASEMENT - Min 1 6 1 0 Max 3 0 5 0 or 2 6 6 0 CASEMENT - Min 3 0 1 6 Max 6 0 5 0 or 5 0
More informationA-Series Aluminum Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 A-Series Aluminum Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an A-Series Gantry Crane into a competitive bid project or
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-08 33 23 (August 2015) --------------------------- Preparing Activity: NASA Superseding UFGS-08 33 23 (July 2007) UNIFIED FACILITIES GUIDE SPECIFICATIONS References are
More information1. Vertical reciprocating conveyor, Hydraulic straddle VRC.
PART 1: GENERAL 1.01 Section Includes: 1. Vertical reciprocating conveyor, Hydraulic straddle VRC. a. Machine, controller, platform, structural steel hoist frame. b. Wire mesh enclosure and gates. Related
More informationopus I efficiency weather tightness durability er tightness durability energy efficiency royalplast.ca
opus I royalplast.ca lity energy efficiency weather tightness efficiency weather tightness durability er tightness durability energy efficiency opus I frame m 5 5/8 all PVC multi-chambered profile frame
More informationIntroducing our new high-performance thermal curtain wall, windows, entrances and storefronts. thermal
Introducing our new high-performance thermal curtain wall, windows, entrances and storefronts thermal Perot Museum of Nature and Science Location: Dallas, TX Building Envelope Our solar and thermal performance
More informationELVORON LU/LA ELEVATOR
Creating An Accessible World ELVORON LU/LA ELEVATOR DESIGN AND PLANNING GUIDE www.garaventalift.com Please note: Dimensions provided in this Guide are for REFERENCE ONLY and should not be used for site
More informationLoading Dock Equipment. Three Generations of Quality Service Since Feature Product: Guardian Dor-Seal System. Quality Made, Built To Last
Quality Made, Built To Last Loading Dock Equipment Three Generations of Quality Service Since 1940 In this catalog: Feature Product: Guardian Dor-Seal System Dock Levelers Truck Restraints Dock Seals Dock
More informationEn e r g e x El i t e Window Systems
En e r g e x El i t e Window Systems Style, beauty & comfort united with versatility and advanced performance En e r g e x El i t e INNOVATION WITHOUT COMPROMISE Energex Elite represents a bold, new, highly
More informationOpen Up Your Space, Add Light Series 2050 and Series 2050i Garden Windows
Open Up Your Space, Add Light Series 2050 and Series 2050i Garden Windows Series 2050 Garden Window The Series 2050 standard garden window has an outstanding reputation for its distinctive design and excellent
More informationINC Pre-Assembled Structures
INC Pre-Assembled Structures Drop-In In-Place Noise Control Pre-Engineered Factory Finished High Performance Rugged Durability INC pre-assembled structures offer a high performance, cost-effective alternative
More informationWork Order Number. [Provide cavity wall exterior wall systems composed of the Exterior Closure and Exterior Wall Backup Construction indicated below.
6. ENGINEERING SYSTEMS REQUIREMENTS B20 EXTERIOR ENCLOSURE SYSTEMS REQUIREMENTS EXTERIOR ENCLOSURE TEMPLATE 02/18 Instructions for using this template: There are template files for each UNIFORMAT Level
More informationSECTION Temp-Master INSULATED ROLLING SERVICE DOORS
GENERAL NOTES TO SPECIFIER: SECTION 08 33 00 Temp-Master INSULATED ROLLING SERVICE DOS THIS SPECIFICATION SECTION HAS BEEN PREPARED TO ASSIST DESIGN PROFESSIONALS IN THE PREPARATION OF PROJECT OFFICE MASTER
More informationMDS TL5 Minimum Deflection Systems
MDS Minimum Deflection Systems Approvals FHWA NCHRP 350 MASH EN1317 H4 MDS BARRIERS Bridge & Road STEEL BARRIER SYSTEMS Page Page 1 1 V11 MDS BARRIERS Run-off-road crashes are one of the most common types
More informationMDS TL4 Minimum Deflection Systems
MDS Approvals FHWA NCHRP 350 MASH-08 EN1317 H2 Bridge & Road STEEL BARRIER SYSTEMS Page 1 V11 Run-off-road crashes are one of the most common types of crashes in urban and highway environments. Installing
More informationSECTION CHAIN LINK FENCES AND GATES
SECTION 32 31 13 CHAIN LINK FENCES AND GATES SPEC WRITER NOTE: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. Use this section in specifying permanent chain
More informationVinyl Window Designs Ltd. 550 Oakdale Road Toronto, ON M3N 1W6 SPECIFICATIONS
Vinyl Window Designs Ltd. 550 Oakdale Road Toronto, ON M3N 1W6 DIVISION 08 / SECTION 08560, VINYL WINDOWS SPECIFICATIONS 1.0. Section includes: 1. All windows of the types and sizes as called for in this
More informationGALLERY. collection 1 & 2-LAYER CONSTRUCTION. clopay.com
GALLERY collection 1 & 2-LAYER CONSTRUCTION Gallery Collection Model GD4S Garage Door with Clayton Long Window Design, Spade Lift Handles and Step Plates. Smooth Fiberglass Model FS2651 Entry Door with
More information