R&M Floor Systems Compact:

Transcription

1 R&M Compact: R&M The demands on floors are very high, and they are met in all essential respects with our floor systems. Thus, the floating floor version on board ships is available in form of floor panels and a combined system of screed plates and insulation plates. Apart from their rapid and compact laying, they also meet the requirements of the noise control and fire protection regulations.

2 R&M Type Outer layer Current fire Mass classification per area Steel A kg/m² Steel C 32.3 kg/m² EPSI Screed plates A kg/m² In order to guarantee our customers maximum safety, all our products are tested in accordance with international guidelines. Certification forms an important part of our quality management system. Please do not hesitate to contact us if you have any questions on current certificates or, alternatively, visit our website at

3 The design of the floating floor A-60 comprises aligned individual panels. Thanks to the A-60 fire classification and excellent soundproofing, this floor system can be used throughout the ship and, as such, satisfies all the demands placed on modern ship flooring. To install, after being laid down, the panels are spot welded. The flooring is then finished with further coating elements. The design of the A-60 floor panel and all components used have been tested and approved according to international standards.

4 Technical data Fire classification A-60 Element width 600 mm Element length 1200 and 2400 mm Thickness 73 mm Mass per area panel 35.3 kg/m² Density of insulation material 150 kg/m 3 Certification EC, USCG, RMRS

5 The C class floating floor can be used in all areas where international regulations do not demand compliance with fire classification A or B. The design of the flooring, with its individual panels, is based on the floating floor A-60 yet with the difference that the insulation below the steel deck layer is less thick. To install, after being laid down, the panels are spot welded. The flooring is then finished with further coating elements. All components of the C class floor panel have been tested and approved according to international standards.

6 Technical data Fire classification Element width Element length Thickness Mass per area panel C 600 mm 1200 and 2400 mm 53 mm 32.3 kg/m² Density of insulation material 150 kg/m 3 Certification n/a

7 EPSI Screed plate floating insulation EPSI Screed plate floating insulation The floating floor EPSI developed by R&M with fire classification A-60 satisfies the most stringent fire insulation requirements and, as such, can be used anywhere on the ship. Unlike traditional concrete fire insulation systems, the EPSI floor has a very quick cure time of just approx. 24 hours and a quick laying time of 2 4 m²/h. In addition, tests have confirmed the system s very good soundproofing properties. Further highlights are its resistance to moisture and the fact that expansion joints are not necessary during assembly. Depending on requirements, the EPSI floor is available in thicknesses ranging between 60 mm and 120 mm. The design of the EPSI floor panel and all components used have been tested and approved according to international standards.

8 EPSI Screed plate floating insulation EPSI Screed plate floating insulation EPSI Screed plate floating insulation Technical data Fire classification A-60 Element width 333 mm Element length 333 mm Thickness mm Mass per area panel kg/m² Density of insulation material 150 kg/m 3 Certification EC, USCG