ASHRAE/USGBC/IES Standard What Does It Mean for Commissioning Providers?

Size: px

Start display at page:

Download "ASHRAE/USGBC/IES Standard What Does It Mean for Commissioning Providers?"

Geoffrey Franklin
6 years ago
Views:

1 ASHRAE/USGBC/IES Standard What Does It Mean for Commissioning Providers? Kent W. Peterson, PE, FASHRAE, LEED AP P2S Engineering, Inc.

2 What is Standard 189.1? ANSI standard developed in model code language Provides minimum requirements for high-performance, green buildings Applies to all buildings except low-rise residential buildings (same as ASHRAE/IESNA Std 90.1) Optional Compliance Path to the International Green Construction Code (IgCC) Not a design guide, not a rating system 2

3 Goals for Standard Establish mandatory criteria for green buildings that result in buildings that are designed, constructed and operated to maintain high levels of performance in the key areas of the standard. Provide simple compliance options Complement green building rating programs Standard is not intended to compete with green building rating programs 3

4 Development of Standard Preliminary meeting (Jun) st public review (May-Jul) nd public review (Feb) Committee reconstituted (Nov) rd public review (May-Jun) 4th public review of ISCs (Sep-Oct) Publication approval (Dec) 2010 Publication (Jan 22nd) Transition to SSPC

5 What Happens When Green Becomes Code? Do Buildings Get Better? 5

6 Standard Topic Areas Sustainable Sites Water Use Efficiency Energy Efficiency Indoor Environmental uality Building s Impact on the Atmosphere, Materials & Resources Construction and Operations Plans 6 STANDARD FOR THE DESIGN OF HIGH-PERFORMANCE GREEN BUILDINGS

7 Compliance Paths Mandatory + Prescriptive Path (simple option, very few calculations) Mandatory + Performance Path (more options, but more effort) 7

Sustainable Sites Mandatory Provisions 1.

Reduce light pollution solar reflectance index

ability to reflect solar heat, as shown by a

A standard black surface (reflectance 0.

8 Sustainable Sites Mandatory Provisions 1. Site Selection 2. Reduce heat island eﬀect 3. Reduce light pollution solar reflectance index (SRI): a measure of a constructed surface s ability to reflect solar heat, as shown by a small temperature rise. A standard black surface (reflectance 0.05, emittance 0.90) is 0 and a standard white surface (reflectance 0.80, emittance 0.90) is

equipment, generally 40% lower than U.S.

9 Water Use Efficiency Mandatory Provisions Site Water Use Bio-diverse plantings, hydrozoning, & smart irrigation controllers Building Water Use Plumbing fixtures & fittings, appliances, HVAC systems & equipment, generally 40% lower than U.S. EPAct 1992 hydrozoning: to divide the landscape irrigation system into sections in order to regulate each zone s water needs based on plant materials, soil and other factors. 9

10 Water Use Efficiency Mandatory Provisions Water Consumption Measurement Measurement devices with remote communication capability shall be provided to collect water consumption data 10

11 Water Use Efficiency Mandatory Provisions Water Consumption Measurement 11

12 Building Energy Codes 12

13 Energy Efficiency Highlights More energy efficient than Standard Renewable energy provisions Energy measurement for verification Electric peak load reduction 13

14 Energy Efficiency Mandatory Provisions Energy Consumption Measurement Measurement devices with remote communication capability shall be provided to collect energy consumption data 14

15 Energy Efficiency Mandatory Provisions Energy Consumption Measurement 15

EPAct baseline efficiency levels, and: Renewable energy system producing annually 6 kbtu/ 2 of conditioned floor space

16 Energy Efficiency Prescriptive Option Mechanical Equipment Efficiency Compliance Options U.S. EPAct Baseline Use equipment with U.S. EPAct baseline efficiency levels, and: Renewable energy system producing annually 6 kbtu/ 2 of conditioned floor space Peak load reduction of 10% Higher Efficiency Use higher efficiency of EnergySTAR requirements and Appendix C, and: Renewable energy system producing annually 4 kbtu/ 2 of conditioned floor space Peak load reduction of 5% 16

17 Energy Efficiency Performance Option Annual Energy Cost Proposed mandatory plus prescriptive Annual Equivalent Carbon Dioxide (CO2e) Proposed mandatory plus prescriptive Peak Electric Demand Proposed mandatory plus prescriptive 17

1 VRP Outdoor air delivery monitoring Outdoor air flow rate monitoring of minimum outside

18 Indoor Environmental Quality Mandatory Provisions Indoor Air uality Ventilation rates per ASHRAE Standard 62.1 VRP Outdoor air delivery monitoring Outdoor air flow rate monitoring of minimum outside air MERV 8 filter (MERV 13 in PM2.5 non-attainment areas) Eliminate air bypass around filters No smoking inside building Building entrance entry mat system 18

19 Indoor Environmental Quality Mandatory Provisions ermal Environmental Conditions Comply with ASHRAE Std 55 Section 6.1 Design and 6.2 Documentation Acoustical Control Defined STC values for exterior and interior assemblies Daylighting by Toplighting (skylights) Targeted for large enclosed spaces in buildings three stories 19

coatings Floor covering materials Composite wood and agrifiber

20 Indoor Environmental Quality Prescriptive Option Materials Emissions and VOC requirements Adhesives and sealants Paints and coatings Floor covering materials Composite wood and agrifiber products Office furniture systems and seating Ceiling and wall systems 20

21 The Building s Impact on the Atmosphere Highlights Construction waste management Reduced Impact Materials Wood products Refrigerants Storage and collection of recyclables and discarded goods 21

22 Construction and Operation Mandatory Provisions Plans for Construction Building Acceptance Testing Building Commissioning Erosion and Sediment Control IAQ Construction Management Moisture Control Construction Vehicles 22

Construction and Operation Building Acceptance Testing Activities Prior to Permit Designate an Acceptance Representative to lead, review, and oversee acceptance representative: An entity identified

23 Construction and Operation Building Acceptance Testing Activities Prior to Permit Designate an Acceptance Representative to lead, review, and oversee acceptance representative: An entity identified by the owner who leads, plans, schedules, and coordinates the activities needed to implement the building acceptance testing activities. The acceptance representative may be a qualified employee or consultant of the owner. The individual serving as the acceptance representative shall be independent of the project design and construction management, though this individual may be an employee of a firms providing those services. CDs shall provide details of the tests to be performed Review CDs to verify sensor locations, devices, and control sequences are properly documented 23

24 Construction and Operation Building Acceptance Testing Activities Prior to Building Occupancy Verify proper installation and start-up of systems Perform acceptance tests and complete test forms Verify a systems manual has been prepared O&M documentation Warranty information Information needed to understand and optimally operate the building systems 24

25 Construction and Operation Building Acceptance Testing Systems to be Tested: Mechanical systems: HVAC, IAQ, refrigeration and associated controls Lighting systems: daylighting controls, occupancy sensing devices and automatic shut-off controls Renewable energy systems Water measurement devices Energy measurement devices 25

26 Construction and Operation Building Project Commissioning Required for all building projects > 5,000 2 of gross floor area Cx satisfies Building Acceptance Testing Requirements in the Standard Cx shall be incorporated into the pre-design, design, construction and first year of occupancy commissioning authority (CxA): An entity identified by the owner who leads, plans, schedules, and coordinates the commissioning team to implement the building commissioning process. 26

27 Construction and Operation Building Project Commissioning Activities Prior to Permit Designate a project commissioning authority to lead, review, and oversee Owner Project Requirements Design team shall develop Basis of Design CxA shall review OPR and BOD CDs shall provide details of commissioning requirements Review CDs at 50% and 100% to verify documents achieve construction phase OPR Develop a Cx Plan 27

Construction and Operation Building Project Commissioning Activities Prior to Building Occupancy Verify proper installation and performance of systems to be commissioned Verify completion of

28 Construction and Operation Building Project Commissioning Activities Prior to Building Occupancy Verify proper installation and performance of systems to be commissioned Verify completion of construction checklist and verification Verify training Complete preliminary commissioning report Verify a systems manual has been prepared verification: the process by which specific documents, components, equipment, assemblies, systems, and interfaces among systems are confirmed to comply with the criteria described in the owner s project requirements. 28

29 Construction and Operation Building Project Commissioning Post-Occupancy Activities Complete remaining commissioning activities that can only be completed subsequent to building occupancy Complete final commissioning report 29

30 Construction and Operation Building Project Commissioning Systems to be Tested: Building envelope systems, components, and assemblies to verify the thermal and moisture integrity Building envelope pressurization to confirm air tightness if included in BOD requirements Mechanical systems: HVAC, IAQ, refrigeration and associated controls Lighting systems: daylighting controls, occupancy sensing devices and automatic shut-off controls Irrigation 30

31 Construction and Operation Building Project Commissioning Systems to be Tested (continued): Plumbing Domestic water and process water pumping and mixing systems Service water heating systems Renewable energy systems Water measurement devices Energy measurement devices 31

Post-construction, pre-occupancy flush-out Option A - 24-hr

32 Construction and Operation Mandatory Provisions IAQ Construction Management Plan Air conveyance materials shall remain clean Post-construction, pre-occupancy flush-out Option A - 24-hr flush-out & baseline IAQ testing prior to occupancy Option B - Continuous flush-out 32

33 Construction and Operation Mandatory Provisions Plans for Operation High-Performance Building Operation Plan Site sustainability Track and assess energy and water use Measurement & verification Indoor air quality Green cleaning Maintenance plans 33

Construction and Operation Mandatory Provisions Energy Efficiency Plan for Operation Initial

er 12 months but no later than 18 months a er certificate of occupancy Energy usage reports (both

verification: The process by which specific documents, components, equipment, assemblies, systems,

34 Construction and Operation Mandatory Provisions Energy Efficiency Plan for Operation Initial measurement & verification A er acceptance testing is complete Track and assess energy consumption A er 12 months but no later than 18 months a er certificate of occupancy Energy usage reports (both consumption and demand) Energy Star Portfolio Manager to track performance Assess energy performance verification: The process by which specific documents, components, equipment, assemblies, systems, and interfaces among systems are confirmed to comply with the criteria described in the owner s project requirements. 34

35 What is Your Best Path Forward? Begin to understand the impact of these new requirements on your commissioning business and technical expertise Identify what requisite skills and knowledge you will need once this standard and green codes are implemented 35

36 Further Information Information on Standard 189.1: Information on International Green Construction Code: ASHRAE Training on Standard User Manual is under development to assist in understanding in how to apply the standard 36

37 Questions 37

Relevant ASHRAE and International Standards and Codes for Building

Relevant ASHRAE and International Standards and Codes for Building Prof. Walid Chakroun, DRC, RAL ASHRAE Engineering the World We Live In Road to Climate Friendly Chillers - Moving Beyond CFCS and HCFCS