1.5 mechanical lock ml 150

Size: px
Start display at page:

Download "1.5 mechanical lock ml 150"

Transcription

1 1.5 mechanical lock ml 150 Strip Width Base Material Thickness Min Tensible Min Yield Coatings Max 16 Steel.0225 to.0336 in 52 - ksi 50 - ski Painted / Galvalume UL CONSTRUCTION NUMBERS: TGKX554 The Mechanical Lock (ML) features structural performance as well as architectural aestheticas in ML 150 (1.5 high). Can be factory formed and/or fabricated on site for all the substrates described in the UL Construction numbers mentioned above. UL performed tests For Uplift Resistance of Roof Assemblies UL 580, CLASS 90 For impact resistance of prepared Roof-Covering Materials UL2218, CLASS 4 Fire Tests of roof Coverings UL 790, EXTERNAL FIRE EXPOSURE Features 24 ga steel or 26 ga steel. Colors available on standard, premium and metallic. 16 o.c. On site or factory made. Available in smooth, striated, offset and stiffener ribs. 1.5 High Rib. Finish Kynar 500, Galvalume, Galvanized. requirements Large variety of substrates, including: Open Purlin, Purlin-Metal decking-iso Vapor barrier when using ISO or solid substrate. Minimum Roof Slope 1 1/2 :12 1

2 1.5 mechanical lock ml 150 UL Construction Number Panel Coverage (in) Gauge Clip Max. Clip spacing Roof Substrate Impact Resistance UL-2218 Fire Rating UL-263 Uplift Resistance UL Max in Fix 4-0 Plywood Class 4 Class A Class 90 min Notes Test Procedures are in accordance with Underwriters Laboratories Standard UL-580 under Test for Uplift Resistance of Roof Assemblies. the panel qualifies for a Class A fire rating in compliance with Underwriters Laboratories Standard UL-263 when installed over a non-combustible substrate and Class C fire rating can be obtained as well. QM ML150 Panels carry a Class 4 rating under UL-2218 Test Standard for Impact Resistance A detail method of installation is available for each Construction Number above that can be found in the UL Roofing Materials Directory. 2

3 ul construction number tgkx Metal Roof Deck Panels* - No. 24 MSG min thick coated steel. Max width 16 in., with 1-1½ in. high ribs. Panels continuous over three or more clips no end laps. 2.- Roof Deck Fasteners*- (Panel Clips) -One- piece assembly, 1 in. wide, 1-5/8 in. high. Min thickness (No. 24 MSG). Clips spaced 48 in. OC. Four fasteners per clip. 3.- Fasteners (Screws) - Fasteners used to attach the plywood (item 4) to the joists to be No. 7-6 coarse thread, No. 1 Phillips drive, bugle-head coated steel wood screws. Panel clip (item 2) to plywood fasteners to be No by 1 in. long, No. 2 Phillips drive, wafer head plated steel wood screws. 4.- Plywood Decking - Plywood decking to be nominal ½ in. (15/32 in. actual) thick APA Rated sheathing. The grade of plywood to be B-C. 5.- Underlayment - One layer of 30 lb. felt, fastened to the plywood deck (item 4) per manufacturer s instructions. Sides overlapped min 2 in., end laps per manufacturer s instructions. 6.- Joists - Spaced a maximum of 24 in. OC. Graded dimension lumber, No. 2 or better. 3

4 1.5 mechanical lock ml 150 Introduction ML-150 is a structural panel which is mechanically seamed during installation. The product is an integral interlocking system by design meaning the panels install in one direction from a given starting point. ML-150is a very flexible panel design which works well with a wide range of building designs. Four different clips are available: Low Floating, High Floating, Fixed, and Special Fixed for fixing panel at center point allowing for multi-directional expansion. Design Completely Concealed Fastened Roofing ML-150 Standing Seam requires low maintenance. The panel is secured with concealed clips and the panel side laps are locked together using a rooftop seaming machine. Applications Architectural Standing Seam Metal Roofing System Ideal for commercial applications. Typically specified as an accent feature for schools, shopping centers, banks, hotels, offices, and a variety of other applications. Tools and Equipment Installer must have prior experience and knowledge of the tolls listed below and their uses in working with metal roofing. Caulking Gun Snips Cordless Screw Gun Pop Rivet Tool Tape Measure Hemming Tool Electrical Extension Cord Heavy Gloves Safety Glasses. Specifications Color and Finishes 24 Gauge Galvalume 35 Year Finish Warranty on Kynar 500 Finish Widths Actual Panel Coverage (Width): 16 and 20 Minimum Slope = 3":12" Lengths ML-150 Panel is available in standard lengths from 4 to 40. Longer lengths require additional handling, packaging, and shipping considerations. An extra handling charge may apply to panels over 40. Continuous Rollformed Lengths: eliminates need for panel lap joints. Installation Solid Substrate Required Seamer Machine Required Weather Tight Warranty is not Available Underlayment Required Oil Canning Offset, striations and pencil ribs provide strength and reduce the incidence of oil canning in the panels. Testing UL 790 Fire Test of Roof Coverings, Class A, B, C UL 2218 For Impact Resistance, Class 4 UL 580 Uplift Resistance. Class 90 Construction No Packaging Options Standard packing A packaging charge will be added to all orders. Standard packing is crating for all orders. LTL packing For LTL, panels are packaged in a completely enclose crate to provide optimum protection. Additional charges will apply for non-standard packing and special requests. 4

5 Strippable film Removal The panels may have a protective strippable film layer applied to the topside of the panel to prevent possible damage to the painted surface. If panel has a protective film coating, remove the film before exposing to direct sunlight and high temperatures. After exposure to sunlight, the film cannot be removed. Under no circumstances should the film remain on the panels after installation. Receiving Materials It is the responsibility of the installer to unload material from the delivery truck. The installer shall be responsible for providing suitable equipment for unloading of material from the delivery truck. After receiving material, check the condition of the material, and review the shipment against the shipping list to ensure all materials are accounted for. If damages or shortages are discovered, it should be noted on the shipping copy at time of delivery. If material is delivered by common carrier, a claim must be made with the carrier as soon as possible. Manual Handling A panel should never be picked up by its ends. Instead, lift the panel along its longitudinal edge and carry in a vertical (not flat) position. Safety Metal Panels can become slippery, so always wear shoes with non-slip soles. Walking or Standing on a metal roof which do not have plywood or other deck beneath it is not recommended. However, if you must do so, always walk on the purlins, never between. Delivery and Packing Options Lead Time Please allow 2-3 days for delivery for material or colors we have in stock. Color we have to paint please allow working days. Touch Up Paint All painted panels and flashings have a factory applied baked on finish. Handling and installing panels may result in some small scratches or nicks to the paint finish. Touch-up paint is available in matching colors. It is recommended that a small brush be used to apply touch-up paint to those areas that are in need of repair. Touch-up paint does not have the superior chalk and fade resistance of the factory applied paint finish and will normally discolor at an accelerated rate. Periodic touch-up may be required to maintain color match. There is no warranty on touch-up paint in regards to color match because the paint processes are different. Aerosol paint should not be used because of the overspray that may occur. Storage Bare Galvalume and painted panels can be expected to give many years of rust-free service when precautions are taken during storage. If metal is not to be used immediately, store inside in a well ventilated, dry location. Any outdoor storage is at the customer s own risk! At time of delivery, inspect panels for moisture. If moisture has formed, the panels should be uncrated, wiped dry, and allowed to dry completely. Failure to remove the entrapped moisture between the sheets immediately will affect the service life of the metal. Extended storage of panels in a bundle is not recommended. Storage on Roof, Crates need to be placed parallel to the framing members and the slope of the roof. Load capabilities of the structure must be checked prior to placing crates on the roof. 5

6 trim hip ridge valley w/ integral cleat drip edge locking pitch change z bar end wall 6

7 RC24-SO13 A= 6 B=½ RC24-SO12 A=5 B=1 RC24-SO16 A=7 B=1 RC24-SO20 A=9½ B=1 RC24-SO24 A=11 B=1 RCS24-SO16 A= 4½ B=1 C=2 D=½ PC24-SO16 A= 5 B=1 C=2 D=7½ E=½ zee bar -1½ Z24-SO314 A=1 B= 1/4 C=1 Z24-SO334 A=1 ¾ B= 1¼ C=1 Z24-SO414 A=1 B=2 ¼ C=1 Z24-SO415 A=1 B=1 ¾ C=1 3 ¼ 3 ¾ 4 ¼ 3 ¾ VENTED ZEE AVAILABLE, PLEASE INQUIRE 7

8 GUS24-SO235 A=4 B=4 C=7 D 3½ E=1 GU24-SO2114 A= 4½ B= 5¼ C 5½ D= 3 E= 1 F=1 21 ¼ 20 DS24-SO1618 A= 4 B= 3 C= 3½ VC24-SO24 A=4 B=1 C=5 D=1 E=1 8

9 CS24-SO418 A=2 B=5/8 C=1½ D=3/16 DRIP EDGE (DL) DL24-SO08 A=3 ¾ B=1 ¼ C=2 D=½ EAVE (OFFSET CLEAT) A EC24-SO08 A=4 B=3 C=½ B C SIDEWALL SW24-SO09 A=3 B=5 C= A C B 9

10 j-trim A JC24-SO06 A=3 3/8 B=1 1/8 C=1 D=½ D B C FW24-SO1078 A=6 B=5 5/8 C=1 ¼ D=½ EW24-SO09 A=3 B=5 C=1 HIGH SIDE FASCIA FH24-SO13 A=3 B=5 C=½ 10

11 1.5 mechanical lock 150 ACCESSORIES pipe flashing metal to metal metal to wood pancake wood pancake metal clips sealants 11

12 ACCESSORIES ITEM PIPE FLASHING - GRAY EPDM PIPE FLASHING - SILICONE PIPE SIZE RANGE 1¼ TO ⅛ 1¼ TO 2 1¾ TO 4 1¼ TO 4 3 TO 6 4 TO 7 6 TO 11 7 TO TO TO 24 PIPE SIZE RANGE 1¼ TO 4 4 TO 7 7 TO TO 18 DESCRIPTION EPDM rubber service temperature 65 f to 250 f if slope is more than 20 use next size up BASE DIMENSION 3½ 3¾ 6¼ 7¾ 9¼ 10¾ 14½ 16½ 25⅜ 39½ X 35 SQ BASE DIMENSION 7 3¾ 10 ¾ 16 ½ 16 ½ (HIGH TEMPERATURE) RETROFIT PIPE FLASHING GRAY EPDM PIPE SIZE RANGE ¾ TO 2¾ 2 TO 7 ¼ 3 ¼ TO 10 silicone service temperature 40 to 350 if slope is more than 20 use next size up BASE DIMENSION 6 ¼ 10 ¾ 14 ½ POP RIVET mechanical lock fixed clip finish plain stainless steel # 42, #43, #44, #46 painted stainless steel #42 EPDM rubber service temperature 65 f to 250 f if slope is more than 20 use next size up Box size panel system height gauge box qty ml ⅝ 26 1,000 kynar 500 flashing- 24 ga typ galvalume Acrylic coated galvalume galvalume is a trade mark of biec, inc. 12

13 ACCESSORIES ITEM Pancake wood 1 DESCRIPTION finish Bag size Box size plain x 1 No. 2 phillips self drilling 1 pancake finish Bag size Box size plain 250 2, x 1 No. 2 phillips finish Bag size Box size plain 250 2,000 painted 250 2,000 ¼- 14 x ¾ type ab metal to wood finish Bag size plain 250 painted 250 Box size 2,000 2, x 1 type 17 metal to wood 10 oz tube np1 caulk sealer kynar 500 flashing- 24 ga typ galvalume Acrylic coated galvalume galvalume is a trade mark of biec, inc. type color carton qty carton weight np1 np1 np1 np1 np1 np1 np1 np1 clear gray gray bronze tan almond black white green

14 EAVE DETAIL STANDING SEAM CLIP ML100 PANEL EAVE FLASHING FASTENER 30# FELT CLEAT SET IN SEALANT PLYWOOD DECKING CONTINUOUS CLEAT PA-5 KEEPER STANDING SEAM CLIP ML100 PANEL FIELD CUT & BEND RETURN IN PANEL W/SEALANT & HOOK OVER EAVE FLASHING STANDING SEAM CLIP 30# FELT ML100 PANEL PLYWOOD DECKING EAVE FLASHING CONTINUOUS CLEAT PA-1116 EAVE EAVE FLASHING PLYWOOD DECKING 30# FELT CLEAT SET IN SEALANT CONTINUOUS CLEAT ED

15 FASCIA RAKE WALL DETAIL STANDING SEAM FASCIA STANDING SEAM CLIP W/ FASTENER FASCIA/RAKE WALL FLASHING W/J-CLOSURE FIELD-FORM PANEL LEG TO I.D. OF J-CLOSURE ML150 PANEL SEALANT 30# FELT PLYWOOD DECKING FRWD

16 FASCIA TO SOFFIT TRANSITION 30# FELT PLYWOOD SUBSTRATE SANDING SEAM CLIP W/ FASTENER FRAMING MEMBERS SOFFIT PANEL FASCIA TO SOFFIT FLASHING J-CLOSURE FOR SOFFIT 30 # FELT STANDING SEAM CLIP W/ FASTENER PLYWOOD SUBSTRATE SOFFIT PANEL J-CLOSURE FOR SOFFIT FASCIA TO SOFFIT FLASHING FTST

17 GABLE DETAIL GABLE FLASHING W/J CLOSURE FIELD-FORM PANEL LEG TO I.D. OF J-CLOSURE SEALANT CONTINUOUS CLEAT 30# FELT PLYWOOD DECKING STANDIGN SEAM CLIP W/ FASTENER GD

18 GUTTER DETAIL STANDING SEAM CLIP W/ FASTENER GUTTER STRAP (FIELD-FORMED) GUTTER FLASHING FASTENER 30# FELT CLEAT SET IN SEALANT PLYWOOD DECKING GUTTER SUPPORT AS SPECIFIED BY ARCHITECT GD

19 HIP/RIDGE DETAIL HIP/RIDGE FLASHING W/ Z CLOSURE 3/4 TURN - UP SEALANT (AT VERTCAL SEAM & UNDER Z ) 30# FELT STANDING SEAM CLIP W/ FASTENER PLYWOOD DECKING GtD

20 HIgh side detail HIGH SIDE FLASHING W/ Z CLOSURE 3/4 TURN-UP STANDING SEAM CLIP W/ FASTENER 30# FELT SEALANT (AT VERTICAL SEAM & UNDER Z ) CLEAT PLYWOOD DECKING HSD

21 head wall detail FASTENER 3/4 TURN-UP COUNTER FLASHING W/REGLET & Z CLOSURE ML150 PANEL STANDING SEAM CLIP W/ FASTENER SEALANT (AT VERTICAL SEAM & UNDER Z ) PLYWOOD DECKING 30 # FELT HWD

22 inside corner detail FIELD-FORM PANEL LEG TO I.D. OF J-CLOSURE INSIDE CORNER FLASHING W/ J CLOSURE ML 100 PANEL 30# FELT SEALANT PLYWOOD SUBSTRATE STANDING SEAM CLIP W/ FASTENER icd

23 outside corner detail STANDING SEAM CLIP W/ FASTENERS ML-150 PANEL PLYWOOD SUBSTRATE 30# ROOFING FELT FIELD - FORMED PANEL SEALANT ocd

24 pitch change detail STANDING SEAM CLIP W/ FASTENER PITCH CHANGE FLASHING W/ Z CLOSURE 3/4 TURN - UP ML100 PANEL SEALANT (AT VERTICAL SEAM & UNDER Z ) 30# FELT PLYWOOD DECKING pchd

25 rake detail FASTENER RAKE FLASHING W/REGLET & J- CLOSURE FILED - FORM PANEL LEG TO I.D. OF J - CLOSURE SEALANT 30# FELT PLYWOOD DECKING STANDING SEAM CLIP W/ FASTENER rkd

26 SILL DETAIL 30# FELT STANING SEAM CLIP W/ FASTENER PLYWOOD SUBSTRATE SILL FLASHING SLd

27 VALLEY DETAIL STANDING SEAM CLIP W/FASTENER VALLEY FLASHING 30# FELT CLEAT SET ON SEALANT 30# FELT PLYWOOD DECKING VDd

28 VENTED RIDGE DETAIL 3/4 TURN - UP RIDGE VENT FLASHING W/ Z CLOSURE PERFORATED Z POP RIVET STANDING SEAM CLIP W/ FASTENER 30# FELT PLYWOOD DECKING SEALANT (AT VERTICAL LEG & UNDER Z ) VRd

29 PLATE EAVE DETAIL PED

30 PLATE EAVE DETAIL-2 PED

31 PLATE EAVE DETAIL-3 PED

32 PLATE EAVE DETAIL-4 PED

33 PLATE END WALL DETAIL PEWD

34 PLATE GLOBAL DETAIL PGD

35 PLATE GUTTER DETAIL PGTD

36 PLATE HIGH END DETAIL PHE

37 PLATE HIGH END DETAIL PHR

38 PLATE HEAD WALL DETAIL PHW

39 PLATE PITCH CHANGE DETAIL PPCH

40 PLATE VALLEY DETAIL PVD

41 PLATE VENTED RIDGE DETAIL PVR

TRIAD CORRUGATED METAL, INC.

TRIAD CORRUGATED METAL, INC. TRIAD CORRUGATED METAL, INC. C O M M E R C I A L R E S I D E N T I A L A G R I C U L T U R A L Snap Loc Panel Guide Snap Loc metal panels are a perfect fit for residential, architectural and commercial

More information

Central Texas Metal Roofing Supply Co., Inc 36" NET COVERAGE SHEET WIDTH 38 ¼ 40 ¼ 38 ¼ 40 ¼ 38 ¼ 40 ¼ 40 ¼ 40 ¼

Central Texas Metal Roofing Supply Co., Inc 36 NET COVERAGE SHEET WIDTH 38 ¼ 40 ¼ 38 ¼ 40 ¼ 38 ¼ 40 ¼ 40 ¼ 40 ¼ 36" 1 2 " 6" GAUGE PANEL FINISH NET COVERAGE SHEET WIDTH WEIGHT PER SQ. 26 26 26 26 24 24 24 24 TEXAS RIB CHANNEL GUARD TEXAS RIB CHANNEL GUARD TEXAS RIB CHANNEL GUARD CHANNEL GUARD CHANNEL GUARD GALVALUME

More information

Central Texas Metal Roofing Supply Co., Inc NET COVERAGE SHEET WIDTH

Central Texas Metal Roofing Supply Co., Inc NET COVERAGE SHEET WIDTH 1 2 " 1 24" GAUGE PANEL FINISH NET COVERAGE SHEET WIDTH WEIGHT PER SQ. 26 5 Vee GALVALUME 24 26 3/8 95.00 PRICE PER SQ. PRICE PER LINEAR FOOT PANEL PRICING: 1. Price per Square is based on 26 3/8 sheet

More information

Specifications for FL-100 Soffit Panel

Specifications for FL-100 Soffit Panel Union Corrugating Company Specifications for FL-100 Soffit Panel SECTION 07410 METAL SOFFIT PANELS PART 1 GENERAL 1.1 DESCRIPTON A. Section Includes: 1. Preformed metal soffit panel system 2. Associated

More information

Product Guide HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES

Product Guide HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES 5V Product Guide HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES ½" 24" COVERAGE Copyright 2018, Central States Manufacturing, Inc., All Rights Reserved. D C GUID_PROD_5V_180201 The men

More information

StrongSeam SSFF1 Panel

StrongSeam SSFF1 Panel StrongSeam SSFF1 Panel Installation Manual May 2016 12 TO 24 COVERAGE CLIP OFFSET STRIATED PANEL (2 STRIATION BEADS ON PANEL) 0.875 0.9375 26 ga. & 24 ga. UL90 #529 UL2218 Class IV/Impact UL790 Class A/Fire

More information

CS-100 Guide Specifications

CS-100 Guide Specifications MANUFACTURER CUSTOM-BILT METALS 1333 Corporate Drive, Suite 103 Irving, Texas 75038-2520 (800) 826-7813 or info@custombiltmetals.com www.custombiltmetals.com CS-100 Guide Specifications This Guide Specification

More information

Central Snap. Condition Details C SNAPDETAILS

Central Snap. Condition Details C SNAPDETAILS Central Snap Condition Details D C SNAPDETAILS150612.2 The men and women at Central States Manufacturing, Inc. would like to welcome you. OUR MISSION Central States Manufacturing, Inc. is a 100% employee-owned

More information

ALLMET CONTINENTAL INSTALLATION GUIDE

ALLMET CONTINENTAL INSTALLATION GUIDE ALLMET CONTINENTAL INSTALLATION GUIDE www.allmet.com INSTALLATION NOTIFICATION The installation procedures demonstrated in this manual are recommended methods for the installation of the Allmet Continental

More information

INSTALLATION GUIDE.

INSTALLATION GUIDE. INSTALLATION GUIDE www.gerardusa.com INSTALLATION NOTIFICATION The installation procedures demonstrated in this manual are recommended methods for the installation of the Gerard Canyon Shake counter batten

More information

Residential Pricing Guide

Residential Pricing Guide Guide TABLE OF CONTENTS Panels 5V Crimp Slimline 2 4 Accessories Flat Sheets Coils V-Groove Soffit Ridge Caps Roof Jacks Touch-up Paint Insulation Slimline Rib Cover Closure Strips Tube Sealant 6 6 7

More information

Prior to ordering and installing materials, all dimensions should be verified by field measurements.

Prior to ordering and installing materials, all dimensions should be verified by field measurements. Important Information The application and detail drawings in this manual are strictly for illustration purposes and may not be applicable to all building designs or product installations. All projects

More information

Pacific Tile Counter Batten and Batten

Pacific Tile Counter Batten and Batten Pacific Tile Counter Batten and Batten INSTALLATION GUIDE www.gerardusa.com INSTALLATION NOTIFICATION The installation procedures demonstrated in this manual are recommended methods for the installation

More information

Western States 7/8 Corrugated

Western States 7/8 Corrugated Western States 7/8 Corrugated Installation, Flashings & Shop Drawing Detail Guide Table of Contents Section Page Section Page Notes to Designer / Installers..1 Fastener Placement and Selection.2-3 Key

More information

SECTION MANUFACTURED ROOF AND WALL PANELS SECTION SHEET METAL ROOFING

SECTION MANUFACTURED ROOF AND WALL PANELS SECTION SHEET METAL ROOFING SPECIFICATIONS www.englertinc.com MANUFACTURER ENGLERT, INC. 1200 Amboy Avenue Perth Amboy, New Jersey 08861 Tel: (732) 826-8614 Fax: (732) 826-8865 PART I - GENERAL 1.01 WORK INCLUDED SECTION 07410 -

More information

SECTION METAL ROOF PANELS

SECTION METAL ROOF PANELS SECTION 07 41 13 PART 1 GENERAL 1.1 SECTION INCLUDES A. Standing-seam roof panels. B. Metal roofing accessories. 1.2 RELATED SECTIONS A. Section 07 62 00 - Sheet Metal Flashing. B. Section 07 72 00 - Roof

More information

1 1/2" SSR. FABRAL The pursuit of excellence since 1967

1 1/2 SSR. FABRAL The pursuit of excellence since 1967 1 1/2" SSR Detail Manual and Estimate Guide 16" 1 1 2" PROPER STORAGE When moisture remains in contact with Galvanized panels in the absence of freely circulating air, white, black or dark gray corrosion

More information

238T and 138T Panel and Accessories Price List 9/29/2017 (price good for shipments through 11/31/2017) Customer Job Date Sales Rep 238T PANEL ITEM #

238T and 138T Panel and Accessories Price List 9/29/2017 (price good for shipments through 11/31/2017) Customer Job Date Sales Rep 238T PANEL ITEM # 238T and 138T Panel and Accessories Price List 9/29/2017 (price good for shipments through 11/31/2017) Customer Job Date Sales Rep 238T PANEL ITEM # DESCRIPTION SELLING PRICE UOM 238T 238T Seam Cap 24

More information

General Overview SECTION PBR & R PANEL - PREFORMED ROOF AND WALL PANELS

General Overview SECTION PBR & R PANEL - PREFORMED ROOF AND WALL PANELS SECTION 07410 - PREFORMED ROOF AND WALL PANELS # Specifier: Notation (#) means that text following is a specifier s note or sample. PART 1 - GENERAL 1.01 Description # Specifier: Do not alter paragraph

More information

INSTALLATION MANUAL Heritage Series

INSTALLATION MANUAL Heritage Series INSTALLATION MANUAL Heritage Series STEEL ROOF PANELS HEAD OFFICE 1418 Michael St., Ottawa, ON K1B 3R2 WATS LINE: 1 800-267-0860 TEL.: 1 613-746-3206 FAX: 1 613-746-0445 Contents Page Introduction, Storage..

More information

STILE. Panel Information. Design/Installation Considerations. Flashing Profiles. Detail Conditions. Notes. Accessory Profiles. Testing Information

STILE. Panel Information. Design/Installation Considerations. Flashing Profiles. Detail Conditions. Notes. Accessory Profiles. Testing Information Table of ontents Product Page No. Product Page No. Panel Information Profile...PST-2 Panel Overview...PST-2 Flashing Profiles Eave...PST- Extended Eave...PST- leat...pst- Stile Starter...PST- Box Gutter...PST-

More information

S BI COM P ON E NT CA T ALOG

S BI COM P ON E NT CA T ALOG SBI METAL BUILDINGS & COMPONENTS S BI COM P ON E NT CA T ALOG Date: 03 / 16 / 2017 COMMERCIAL PRODUCTS Commercial Panels and Trim Cee, Zee, Eave Struts, Angle, Channel, and Clips Accessories FT 0 1 2 3

More information

SECTION MANUFACTURED ROOF AND PANELS SECTION SHEET METAL ROOFING

SECTION MANUFACTURED ROOF AND PANELS SECTION SHEET METAL ROOFING SPECIFICATIONS www.englertinc.com MANUFACTURER ENGLERT, INC. 1200 Amboy Avenue Perth Amboy, New Jersey 08861 Tel: (732) 826-8614 Fax: (732) 826-8865 PART I - GENERAL 1.01 WORK INCLUDED SECTION 07410 -

More information

SECTION METAL ROOFING MASTER SPECIFICATION

SECTION METAL ROOFING MASTER SPECIFICATION SECTION 07 41 13 METAL ROOFING MASTER SPECIFICATION PART I - GENERAL REQUIREMENTS 1.01 DESCRIPTION OF WORK: A. Section Includes: The extent of each type of preformed metal roofing panel as indicated on

More information

SL150 Guide Specification

SL150 Guide Specification SL150 Guide Specification This is a suggested guide specification for metal roofing projects where the SL150 panel system is applicable. Questions regarding applicability should be discussed with Union

More information

T-Rib Roofing System

T-Rib Roofing System T-Rib Roofing System Installation Manual 3449 Hempland Road Lancaster, PA 17601 (717) 397-2741 308 Alabama Blvd. Jackson, GA 30233 (770) 775-4484 World Wide Web: www.fabral.com E-Mail: fabinfo@fabral.com

More information

PIPE. Central Texas Largest Distributor. Structural Steel, Pipe and Metal Building Components

PIPE. Central Texas Largest Distributor.  Structural Steel, Pipe and Metal Building Components Central Texas Largest Distributor Structural Steel, Pipe and Metal Building Components PIPE Waco Location P.O. Box 154485 913 South Loop Dr. Waco Texas 76705 Local - 254-754-2611 Bryan Location 9401 E.

More information

DAN S CUSTOM SHEETMETAL Manufacturer and Distributor

DAN S CUSTOM SHEETMETAL Manufacturer and Distributor About the Company DAN S CUSTOM SHEETMETAL Manufacturer and Distributor In 1993, DCSM was the first manufacture in the state of Florida to fabricate metal eave closure for tile. We have established a reputation

More information

Central Seam Plus. Central-Loc

Central Seam Plus. Central-Loc Central Seam Plus Central-Loc Product Guide HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES 3" 3" " or 18" COVERAGE " or 18" COVERAGE Central Seam Plus Field seamed Central-Loc Snaps together

More information

NUCOR VR 16 II STANDING SEAM ROOF SYSTEM TABLE OF CONTENTS

NUCOR VR 16 II STANDING SEAM ROOF SYSTEM TABLE OF CONTENTS NUCOR VR 16 II STANDING SEAM ROOF SYSTEM TABLE OF CONTENTS Nucor VR16 II Vertical Rib Standing Seam Roof System...2 Nucor VR16 II Property and Span Tables...3 Standard Details...5 ED3010PE - Gutter...5

More information

SECTION MANUFACTURED ROOF AND WALL PANELS SECTION SHEET METAL ROOFING

SECTION MANUFACTURED ROOF AND WALL PANELS SECTION SHEET METAL ROOFING SPECIFICATIONS www.englertinc.com MANUFACTURER ENGLERT, INC. 1200 Amboy Avenue Perth Amboy, New Jersey 08861 Tel: (732) 826-8614 Fax: (732) 826-8865 PART I GENERAL 1.01 WORK INCLUDED SECTION 07410 - MANUFACTURED

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION SECTION 07320 TWO-PIECE TAPERED MISSION CLAY ROOFING TILE PART 1 GENERAL 1.01 SECTION INCLUDES A. Formed clay roofing tiles, complete with components and other required accessories

More information

INSTALLATION INSTRUCTIONS for MP-RC1 TWO PIECE CONSTRUCTION TO BE INSTALLED ON COMPLETED ROOF DECK

INSTALLATION INSTRUCTIONS for MP-RC1 TWO PIECE CONSTRUCTION TO BE INSTALLED ON COMPLETED ROOF DECK INSTALLATION INSTRUCTIONS for MP-RC1 TWO PIECE CONSTRUCTION TO BE INSTALLED ON COMPLETED ROOF DECK A. 1. Using curb ribs as a guide, layout and mark roof openings on completed roof deck as outside curb

More information

DETAIL MANUAL A COMPREHENSIVE GUIDE TO METAL ROOFING GULFLOKTM HIDDEN SCREW METAL ROOF SYSTEM

DETAIL MANUAL A COMPREHENSIVE GUIDE TO METAL ROOFING GULFLOKTM HIDDEN SCREW METAL ROOF SYSTEM DETAIL MANUAL A COMPREHENSIVE GUIDE TO METAL ROOFING GULFLOKTM HIDDEN SCREW METAL ROOF SYSTEM Gulf Coast Standing Seam Roofing Panels Since 2004, Gulf Coast Supply and Manufacturing has been happy to offer

More information

Guide Specification SDP 200

Guide Specification SDP 200 PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Sheet metal roofing panels, metal trim, accessories, fasteners, closures, and sealants. [Specifier Note: Edit paragraph below to suit project requirements.]

More information

PBR & PBU PANELS. Technical/Installation Information

PBR & PBU PANELS. Technical/Installation Information PBR & PBU PANELS Technical/Installation Information IMPORTANT NOTICE READ THIS MANUAL COMPLETELY PRIOR TO BEGINNING THE INSTALLATION OF THE Retro-R PANELS. THE MANUFACTURER DETAILS MUST BE FOLLOWED AS

More information

SNAP-CLAD. Technical Information and Flashing Details. /

SNAP-CLAD. Technical Information and Flashing Details.  / SNAP-CLAD Technical Information and Flashing Details Product Information: PAGE 3 SNAP-CLAD Spec. Sheet PAGES 4-13 UL List Cards - UL Construction Numbers 261, 254, 255, 263, 343, 303, 508, 508A, 614, 790

More information

PRODUCT SPECIFICATIONS

PRODUCT SPECIFICATIONS LokSeam LokSeam 12" One of the most versatile architectural metal panels available today, LokSeam by ABC, is a snap-together, concealed fastener, standing seam roof system with a 13/4" tall vertical rib,

More information

METAL ROOFING: RE-ROOFING QUESTIONS & ANSWERS

METAL ROOFING: RE-ROOFING QUESTIONS & ANSWERS METAL ROOFING: RE-ROOFING QUESTIONS & ANSWERS Building contractors are always looking for installation methods that will provide them with savings on labor and materials expenses. Here are some important

More information

Stile. Spanish Tile Installation Guide

Stile. Spanish Tile Installation Guide Stile Spanish Tile Installation Guide IMPORTANT INFORMATION THE APPLICATION AND DETAIL DRAWINGS IN THIS MANUAL ARE STRICTLY FOR ILLUSTRATION PURPOSES AND MAY NOT BE APPLICABLE TO ALL BUILDING DESIGNS OR

More information

Central Snap. Product Guide. 16" or 18" COVERAGE 1¾" HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES

Central Snap. Product Guide. 16 or 18 COVERAGE 1¾ HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES Central Snap Product Guide HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES 1¾" 16" or 18" COVERAGE Copyright 2018, Central States Manufacturing, Inc., All Rights Reserved. D C GUID_PROD_CENTRALSNAP_180201.1

More information

Brava Spanish Tile. Installation Manual. Brava Roof Tile Phone: Fax:

Brava Spanish Tile. Installation Manual. Brava Roof Tile Phone: Fax: Brava Spanish Tile Installation Manual Brava Roof Tile Phone: 319-338-5706 Fax: 319-343-1038 www.bravarooftile.com This document includes the recommended and suggested installation procedures for Brava

More information

SECTION EXTERIOR GRILLS AND SCREENS

SECTION EXTERIOR GRILLS AND SCREENS SECTION 10 82 13 PART 1 GENERAL PART 1 1 SUMMARY A. Section Includes: 1. Exterior perforated aluminum screen wall system with Ombrae TM Optical Tile imaging technology. 2. Accessories including attachments,

More information

Central Span. Product Guide 16" COVERAGE HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES

Central Span. Product Guide 16 COVERAGE HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES Central Span Product Guide HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES 2" 16" COVERAGE Copyright 2018, Central States Manufacturing, Inc., All Rights Reserved. D C GUID_PROD_CentralSpan_180201

More information

SLATE ROOFING INSTALLATION PROPOSAL [Last updated 10/08/2017]

SLATE ROOFING INSTALLATION PROPOSAL [Last updated 10/08/2017] [Change these specifications as needed. Use this sample proposal at your own risk. This is a simple, general proposal and is not meant to be a comprehensive proposal for all situations or projects. If

More information

SHEET METAL ROOF TEST REPORT

SHEET METAL ROOF TEST REPORT SHEET METAL ROOF TEST REPORT Introduction The time tested performance of the double lock standing seam and batten seam metal roofing is demonstrated by thousands of squares successfully installed by SMACNA

More information

Prestige Roofing System

Prestige Roofing System Prestige Roofing System Installation Manual 3449 Hempland Road Lancaster, PA 17601 (800) 477-2741 308 Alabama Blvd. Jackson, GA 30233 (800) 884-4484 World Wide Web: www.fabral.com E-Mail: architecturalsystems@fabral.com

More information

ACCESSORY STRUCTURE Building permit information For 1 & 2-family dwellings

ACCESSORY STRUCTURE Building permit information For 1 & 2-family dwellings ACCESSORY STRUCTURE Building permit information For 1 & 2-family dwellings Building Safety Department 400-2 nd Street South St. Cloud, MN 56301 (320) 255-7239 A building permit is required for any accessory

More information

Sapphire Metal Tile Roofing System

Sapphire Metal Tile Roofing System Sapphire Metal Tile Roofing System Sapphire Metal Tile Roofing Benefits of Sapphire Metal Tile - Beauty and function - Tile Beauty, Steel Strength, Lasts a lifetime - Excellent long term investment - Pays

More information

PROJECT LOCATION SECTION COPPER METAL PLATE WALL PANELS

PROJECT LOCATION SECTION COPPER METAL PLATE WALL PANELS SECTION 07 4213.25 PART 1- GENERAL 1.01 SECTION INCLUDES A. Copper metal plate wall panels. 1.02 RELATED REQUIREMENTS A. Section 05 4000 Cold-Formed Metal Framing: Wall panel substrates support framing.

More information

KBS-100 SNAP-LOCK PANEL & 5V PANEL I N S T A L L A T I O N M A N U A L

KBS-100 SNAP-LOCK PANEL & 5V PANEL I N S T A L L A T I O N M A N U A L KBS-100 SNAP-LOCK PANEL & 5V PANEL I N S T A L L A T I O N M A N U A L KBS Metal Roofing KBS Metal Roofing General Information General Information Before beginning installation of panels, the installer

More information

MS-100 MS-150. MS SERIES Flashing and Details Guide. MS150 Flashing and Details Guide. MS200 Flashings and Details Guide

MS-100 MS-150. MS SERIES Flashing and Details Guide. MS150 Flashing and Details Guide. MS200 Flashings and Details Guide Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 - Fax: 503-581-6877 - www.taylormetal.com MS200 Flashings and Details Guide MS150 MS SERIES MS-100 MS-150 MS-100 MECHANICALLY SEAMED The MS-100

More information

LUX Specifications. Section S - Preformed Steel Siding

LUX Specifications. Section S - Preformed Steel Siding Part 1 General.1 System-1: Installation over building paper or air barrier membrane, on exterior grade gypsum board or exterior grade wood sheathing. 1.2 RELATED SECTIONS.1 Section 01 11 00 Summary of

More information

MultiLok-24 Guide Specifications conforming to C.S.I. standards. A Division of ASC Profiles

MultiLok-24 Guide Specifications conforming to C.S.I. standards. A Division of ASC Profiles MultiLok-24 Guide Specifications conforming to C.S.I. standards A Division of ASC Profiles AEP SPAN MultiLok-24 Guide Spec i fi ca tions MANUFACTURER - AEP SPAN 5100 East Grand Avenue, Dallas, TX 75223,

More information

CLIP-LOC. Panel Information. Detail Conditions. Flashing Profiles. Notes. Accessory Profiles. Testing Information. Design/Installation Considerations

CLIP-LOC. Panel Information. Detail Conditions. Flashing Profiles. Notes. Accessory Profiles. Testing Information. Design/Installation Considerations LIP-LO Table of ontents Product Page No. Product Page No. Panel Information lip-loc Panel Profile... PL-2 Panel Overview... PL-2 Flashing Profiles Eave... PL- leat... PL- Box Gutter... PL- Box Gutter End...

More information

Metafor Panel System Installation Guide

Metafor Panel System Installation Guide Installation Guide innovative cladding design solutions Product Description Universal Flashing Kit Supplemental Guide for VM Pro-Zinc Training To enroll in a VM PRO-ZINC Training Course contact: UMICORE

More information

1 1/2 SSR INSTALLATION GUIDE AGRICULTURAL LIGHT COMMERCIAL RESIDENTIAL

1 1/2 SSR INSTALLATION GUIDE AGRICULTURAL LIGHT COMMERCIAL RESIDENTIAL 1 1/2 SSR INSTALLATION GUIDE AGRICULTURAL LIGHT COMMERCIAL RESIDENTIAL Due to Product improvements, changes and other factors, Fabral reserves the right to change or delete information herein without prior

More information

Snap-On Standing Seam

Snap-On Standing Seam Snap-On Standing Seam Technical Information and Flashing Details Product Information: P A G E 2 Snap-On Standing Seam Spec. Sheet P A G E S 3-6 UL List Cards - UL Construction Numbers 351, 263, 790 P A

More information

PROJECT STATEMENT OF WORK ROOFING PHASE AREA CAMP BLANDING JOINT TRAINING SITE STARKE, FL 32091

PROJECT STATEMENT OF WORK ROOFING PHASE AREA CAMP BLANDING JOINT TRAINING SITE STARKE, FL 32091 PROJECT 214020 STATEMENT OF WORK ROOFING PHASE 2 4800 AREA CAMP BLANDING JOINT TRAINING SITE STARKE, FL 32091 1. SCOPE: Camp Blanding Joint Training Site requires the services of a Florida Licensed General

More information

TABLE OF CONTENTS IMAGE II. Detail Conditions. Panel Information. Flashing Profiles

TABLE OF CONTENTS IMAGE II. Detail Conditions. Panel Information. Flashing Profiles TABLE OF ONTENTS Product Page No. Product Page No. Panel Information Profi les...pim-2 Panel Overview...PIM-2 Flashing Profiles Eave...PIM-3 Extended Eave...PIM-3 leat...pim-3 Offset leat...pim-3 5K Gutter...PIM-3

More information

SECTION INSULATED METAL WALL PANELS. ATAS International, Inc. General Specification for Commercial/Industrial and Architectural Applications

SECTION INSULATED METAL WALL PANELS. ATAS International, Inc. General Specification for Commercial/Industrial and Architectural Applications SECTION 07 42 13 INSULATED METAL WALL PANELS ATAS International, Inc. General Specification for Commercial/Industrial and Architectural Applications PART 1 GENERAL 1.1. Summary The contract drawings indicate

More information

SECTION PRE-ENGINEERED BUILDING INSULATION

SECTION PRE-ENGINEERED BUILDING INSULATION PART 1 GENERAL SECTION 07213 PRE-ENGINEERED BUILDING INSULATION Microsoft Word Instructions: Display hidden notes to specifier by using "Tools"/"Options"/"View"/"Hidden Text". 1.1 SECTION INCLUDES A. Pre-Engineered

More information

PBR & PBU Panels. Technical/Installation Information

PBR & PBU Panels. Technical/Installation Information PBR & PBU Panels Technical/Installation Information TABLE OF CONTENTS A. PBR Panel 1. General Description..................................................................... 2 2. Architect/Engineer Information............................................................

More information

MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)

MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208 BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474 NOTICE OF ACCEPTANCE

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ROOFING AND SIDING PANELS REPORT HOLDER: KINGSPAN INSULATED PANELS, INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ROOFING AND SIDING PANELS REPORT HOLDER: KINGSPAN INSULATED PANELS, INC. 0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1143 Reissued 04/2017 This report is subject to renewal 04/2018. DIVISION: 07 00 00 THERMAL

More information

RIB PANEL INSTALLATION

RIB PANEL INSTALLATION GOLDIN METALS, INC. www.goldinmetals.com 12440 SEAWAY ROAD Mailing Address: 14231 SEAWAY ROAD, SUITE 7000 GULFPORT, MS 39503 (228) 896-6216, Ext. 230 FAX (228) 896-4873 4400 PETERS ROAD P.O. BOX 700 HARVEY,

More information

Specifier Note: Revise paragraph below to suit project requirements. Add section numbers per CSI MasterFormat and specifier s practice.

Specifier Note: Revise paragraph below to suit project requirements. Add section numbers per CSI MasterFormat and specifier s practice. McElroy Metal, Inc. 1500 Hamilton Rd. Bossier City, LA 71111 Phone: (800) 562-3576 Phone: (318) 747-8097 Fax: (318) 747-8099 E-mail: info@mcelroymetal.com www.mcelroymetal.com This MANU-SPECª utilizes

More information

SECTION STRUCTURAL RETROFIT ROOF SUB-FRAMING SYSTEM

SECTION STRUCTURAL RETROFIT ROOF SUB-FRAMING SYSTEM SECTION 13 34 21 - STRUCTURAL RETROFIT ROOF SUB-FRAMING SYSTEM PART 1 - GENERAL 1.1 DESCRIPTION A. The structural retrofit roof sub-framing system will provide support for a new metal roofing system constructed

More information

B. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work.

B. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work. SECTION 10 5113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,

More information

Drexel Metals Clips and Accessories

Drexel Metals Clips and Accessories Drexel Metals Clips and Accessories Your machine makes one component of the total metal roof system. Drexel Metals has invested millions of dollars to ensure our metal roof system meet the required building

More information

The Contractor is responsible for quality control, including workmanship and materials furnished by his subcontractors and suppliers.

The Contractor is responsible for quality control, including workmanship and materials furnished by his subcontractors and suppliers. SECTION 05 31 13 STEEL FLOOR DECKING PART 1 - GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the contract, including General and Supplementary Conditions and Division 01 - Specification

More information

Light-Metal Roof Edge, Raised

Light-Metal Roof Edge, Raised NAIL WOOD CANT TO BLOCKING 2 ROWS STAGGERED EACH ROW 24 O.C. 1/2 MIN. 10 0 MAX. FASTEN 18 O.C. WITH NEOPRENE GASKETED FASTENERS 3-1/2 MIN. 4 6 JOINT COVER PLATE SET IN TWO BEADS OF SEALANT 4 MIN. SPECIFIED

More information

Professional Engineering Services. The Brand of Choice

Professional Engineering Services. The Brand of Choice The Brand of Choice Nucor Building Systems, a division of Nucor Corporation, is one of the most flexible and diverse building manufacturers in operation today. Nucor Corporation is a Fortune 500 Company,

More information

The Contractor is responsible for quality control, including workmanship and materials furnished by his subcontractors and suppliers.

The Contractor is responsible for quality control, including workmanship and materials furnished by his subcontractors and suppliers. SECTION 05 31 33 - STEEL FORM DECKING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the contract, including General and Supplementary Conditions and Division 01 - Specification

More information

HANDBOOK OF CONSTRUCTION DETAILS

HANDBOOK OF CONSTRUCTION DETAILS HANDBOOK OF CONSTRUCTION DETAILS ARCHITECTURAL PRODUCTS FOR THE BUILDING INDUSTRY 12" SSR, Decor-Flush 7, Amp Lok, Double Lock, GrandCurve, High Seam, Posi-Lock Soffit, Slim Seam 7, Snap-on-Batten, Snap-On-Seam,

More information

Specifiers: Click on the icon in the WORD toolbar to reveal detailed instructions

Specifiers: Click on the icon in the WORD toolbar to reveal detailed instructions Specifiers: Click on the icon in the WORD toolbar to reveal detailed instructions (Specifier Note: The purpose of this guide specification is to assist the specifier in correctly specifying perforated

More information

SECTION COMPOSITE METAL WALL PANEL SYSTEM (Accu-Trac Low Profile DS)

SECTION COMPOSITE METAL WALL PANEL SYSTEM (Accu-Trac Low Profile DS) SECTION 07412 COMPOSITE METAL WALL PANEL SYSTEM (Accu-Trac Low Profile DS) PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions

More information

1. Include similar Samples of trim and accessories involving color selection.

1. Include similar Samples of trim and accessories involving color selection. SECTION 074116- INSULATED METAL ROOF PANELS PART 1 - GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION MODIFIED BITUMINOUS MEMBRANE ROOFING Peel & Roof

SECTION MODIFIED BITUMINOUS MEMBRANE ROOFING Peel & Roof SECTION 07550 MODIFIED BITUMINOUS MEMBRANE ROOFING Peel & Roof This section is based on the products of MFM Building Products Corp., which is located at: 525 Orange St. P. O. Box 340 Coshocton, OH 43812

More information

Margaret Greene Park Washroom Building 80 Westwood Road, Guelph, Ontario. Structural and Maintenance Remedial Work

Margaret Greene Park Washroom Building 80 Westwood Road, Guelph, Ontario. Structural and Maintenance Remedial Work SCOPE OF WORK Margaret Greene Park Washroom Building 80 Westwood Road, Guelph, Ontario Structural and Maintenance Remedial Work Prepared For City of Guelph City Hall, 1 Carden Street, Guelph, ON N1H 3A1

More information

PRE-ENGINEERED METAL BUILDING SYSTEM

PRE-ENGINEERED METAL BUILDING SYSTEM PRE-ENGINEERED METAL BUILDING SYSTEM PART 1 GENERAL 1.1 SUMMARY A. The building shall include all primary and secondary structural framing members, connection bolts, roof and wall covering, flashing, gutter,

More information

PATENTS ARE PENDING. Building Dimensions. Exterior Dimensions Roof Edge to Roof Edge

PATENTS ARE PENDING. Building Dimensions. Exterior Dimensions Roof Edge to Roof Edge Assembly Manual 8x9 PATENTS ARE PENDING Approximate Size 7640303 Storage Area Building Dimensions Exterior Dimensions Roof Edge to Roof Edge Interior Dimensions Wall to Wall Sq. Ft. Cu. Ft. Width Depth

More information

ROOFING CONTRACTORS GENERAL TRADE KNOWLEDGE EXAMINATION CONTENT INFORMATION

ROOFING CONTRACTORS GENERAL TRADE KNOWLEDGE EXAMINATION CONTENT INFORMATION ROOFING CONTRACTORS GENERAL TRADE KNOWLEDGE EXAMINATION CONTENT INFORMATION Revised September 14 The General Trade Knowledge portion of the examination is administered daily in Computer Based Testing (CBT)

More information

SECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection

SECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION

More information

A. Product Data: For each type of deck, accessory, and product indicated.

A. Product Data: For each type of deck, accessory, and product indicated. SECTION 053100 - PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Roof deck. 2. Composite floor deck. 3. Noncomposite form deck. 1.2 SUBMITTALS A. Product Data: For each type of deck, accessory, and

More information

SECTION SLOPED TRANSLUCENT METAL SKYLIGHT SYSTEM

SECTION SLOPED TRANSLUCENT METAL SKYLIGHT SYSTEM PART 1- GENERAL 1.1 SUMMARY A. Section Includes: SECTION 084523 - SLOPED TRANSLUCENT METAL SKYLIGHT SYSTEM 1. Flat factory prefabricated structural insulated translucent sandwich panels; with glazed endwalls.

More information

ARCHITECTURAL METAL PANELS PRODUCT SELECTION GUIDE

ARCHITECTURAL METAL PANELS PRODUCT SELECTION GUIDE A r c h i t e c t u r a l E n g i n e e r e d P r o d u c t s ARCHITECTURAL METAL PANELS PRODUCT SELECTION GUIDE 800-733-4955 www.aepspan.com Product Index and Application Guide Application Paint Systems

More information

Metal Roof Panels

Metal Roof Panels University of New Hampshire University of New Hampshire Scholars' Repository Division 07 Thermal and Moisture Protection Chapter 5 Technical Construction and Renovation Standards 1-25-2013 074113 - Metal

More information

BattenLok HS. Technical/Installation Information

BattenLok HS. Technical/Installation Information BattenLok HS Technical/Installation Information IMPORTANT NOTICE READ THIS MANUAL COMPLETELY PRIOR TO BEGINNING THE INSTALLATION OF THE ROOFING SYSTEM. THE MANUFACTURER DETAILS MUST BE FOLLOWED AS A MINIMUM

More information

Agenda. Safety Decking Basics Decking Issues Felt Kick Out Flashing Fascia

Agenda. Safety Decking Basics Decking Issues Felt Kick Out Flashing Fascia Decking & Fascia Agenda Safety Decking Basics Decking Issues Felt Kick Out Flashing Fascia 2 Chapter 7 Tools & Materials Tools for Decking Hammer Measuring Tape Chalk Line Speed Square Utility Knife Circular

More information

Standing Seam Systems. NBS Specification. KingZip SF Standing Seam Roofing System

Standing Seam Systems. NBS Specification. KingZip SF Standing Seam Roofing System NBS Specification KingZip SF Standing Seam Roofing System H31 METAL PROFILED/FLAT SHEET CLADDING/COVERING To be read with Preliminaries/General conditions. TYPE OF CLADDING SYSTEM 140 METAL PROFILED CLADDING

More information

SECTION ROOF SPECIALTIES

SECTION ROOF SPECIALTIES PART 1 - GENERAL 1.1 DESCRIPTION SECTION 07 71 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable

More information

PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)

PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208 BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474 T (786) 315-2590

More information

Three Great Steel Panels

Three Great Steel Panels Three Great Steel Panels Residential Applications Agricultural Applications Commercial Applications Through Fastened Panel Hidden Fastener Panel Color Matched Soffit Color Matched Gutter Color Matched

More information

Prestige Series Guide Specifications

Prestige Series Guide Specifications Prestige Series Guide Specifications MANUFACTURER AEP SPAN www.aepspan.com info@aepspan.com 800-733-4955 Prestige Series is a metal panel for exterior and interior walls, fascias and equipment screen applications.

More information

City of Republic Community Development Department. Residential Roofs REVISION DATE: JANUARY 2017

City of Republic Community Development Department. Residential Roofs REVISION DATE: JANUARY 2017 City of Republic Community Development Department Residential Roofs REVISION DATE: JANUARY 2017 A residential roof permit is required for new roofs and for replacement roofs when the replacement area is

More information

UNA-CLAD Metal Roofing Systems Application Guide

UNA-CLAD Metal Roofing Systems Application Guide UNA-CLAD Metal Roofing Systems Application Guide UC-3 Double-Lock Architectural Series UC-4 No-Clip Architectural Series UC-6 Double-Lock Structural Series UC-14 Snap-Lock Standing Seam Series March 22,

More information

KS SERIES - VERTICAL INSTALLATION

KS SERIES - VERTICAL INSTALLATION CS-DS-01-KSV CS DISCLAIMER CS-PP-01-KSV PANEL PROFILES CS-PP-02-KSV PANEL PROFILES CS-PP-03-KSV PANEL PROFILES CS-PJ-01-KSV KS SERIES EXPANDED PANEL JOINT CS-PJ-02-KSV KS SERIES ENGAGED PANEL JOINT CS-PJ-03-KSV

More information

REPORT HOLDER: RARE MANUFACTURING INC A AVENUE SURREY, BRITISH COLUMBIA V4N 4P2 CANADA EVALUATION SUBJECT: IRONWOOD SHAKE

REPORT HOLDER: RARE MANUFACTURING INC A AVENUE SURREY, BRITISH COLUMBIA V4N 4P2 CANADA EVALUATION SUBJECT: IRONWOOD SHAKE 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2134 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 07 00

More information

HOW TO FIGURE METAL ROOFING MATERIALS

HOW TO FIGURE METAL ROOFING MATERIALS HOW TO FIGURE METAL ROOFING MATERIALS 1. The first step in figuring your metal roofing is to make a sketch of it, complete with the roof measurements. Take the house below as an example: 52 R 12-8 P 19

More information