Install and commission high voltage (HV) electricity current transformer metering
|
|
- Shannon Nichols
- 5 years ago
- Views:
Transcription
1 Page 1 of 5 Install and commission high voltage (HV) electricity current transformer metering Level 4 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of the design and application of high voltage current transformer (CT) meters; determine high voltage CT loadings; diagnose high voltage CT installation integrity; install and commission high voltage CT metering equipment; report high voltage CT installation and commissioning results. Subfield Domain Status Electricity Supply Electricity Supply - Metering Registered Status date 27 May 2002 Date version published 23 April 2007 Planned review date 31 December 2012 Entry information Accreditation Standard setting body (SSB) Recommended: Unit 19313, Demonstrate knowledge of electricity metering systems and installations, or demonstrate equivalent knowledge and skills. Evaluation of documentation and visit by NZQA and industry. Electricity Supply Industry Training Organisation Accreditation and Moderation Action Plan (AMAP) reference 0120 This AMAP can be accessed at Special notes 1 This unit standard is intended for, but not restricted to, workplace assessment. The range statements across the unit standard can be applied according to industry specific equipment, procedures, and processes. 2 Safety of personnel and plant must be a priority throughout the assessment. If the safety requirements are not met the assessment must stop and the candidate will be assessed as not yet competent.
2 Page 2 of 5 3 Performance and work practices in relation to the elements and performance criteria must comply with all current legislation, especially the Electricity Act 1992, and any regulations and codes of practice recognised under that statute; the Health and Safety in Employment Act 1992; and the Resource Management Act Electricity supply industry codes of practice and documented industry procedures include the Safety Manual Electricity Industry (SM-EI) (2004) Wellington: Electricity Engineers Association. A full list of current legislation and industry codes is available from the Electricity Supply Industry Training Organisation, PO Box 1245, Hamilton. 4 Industry requirements include all industry and workplace documented policies, procedures, specifications, business, and quality management requirements relevant to the workplace in which assessment is carried out. 5 Practical exercises should be used for training and assessment wherever possible. 6 High voltage is defined as over 400 volts. Elements and performance criteria Element 1 Demonstrate knowledge of the design and application of high voltage CT meters. includes but is not limited to 2 element meter, 3 element meter. 1.1 The types of high voltage CT are described in accordance with industry includes but is not limited to bar, ring, single and multi-ratio, summation metering, protection. 1.2 The design of high voltage CT is described in accordance with industry includes but is not limited to comparison of 1 amp and 5 amp secondaries, variance analysis output, high and low ratios, short circuit withstand, burden ratings, class of operation. 1.3 The application and use of high voltage CT is described in accordance with industry includes but is a not limited to metering, protection, instruments, terminations and test block.
3 1.4 Multipliers and compensation for high voltage CT ratios is described in accordance with industry requirements version 3 Page 3 of 5 includes but is not limited to criteria for current range selection, matching CT to load, compensation application. 1.5 Open circuit dangers and precautions for CT installations are identified and described in accordance with industry Element 2 Determine high voltage CT loadings. 2.1 Ratios are selected in accordance with industry includes but is not limited to basis for CT matching to loads. 2.2 Class of operation is determined in accordance with industry includes but is not limited to selection of CT class to suit metering accuracy. Element 3 Determine high voltage CT installation integrity. 3.1 Required loadings are captured in accordance with industry includes but is not limited to primary and secondary loads measures. 3.2 Equipment mounting and positioning is checked in accordance with industry includes but is not limited to secure mountings, electrical clearances terminal safeguarding and shrouds. 3.3 Access to equipment is checked in accordance with industry includes but is not limited to sealing, prevention of unauthorised access.
4 Page 4 of Overall installation diagnosis is determined and recorded in accordance with industry includes but is not limited to safety, design criteria upheld, documentation, insulation determination, winding resistance, earthing Element 4 Install and commission high voltage CT metering equipment. 4.1 High voltage CT metering equipment is installed in accordance with industry includes but is not limited to wiring compliance, earthing, mounting, CT classes, burden measurements, ratio selection. 4.2 High voltage CT metering equipment is commissioned in accordance with industry includes but is not limited to polarity tests, burden measurements, prevailing load tests. Element 5 Report high voltage CT installation and commissioning results. job sheet, installation reports and results. 5.1 Reported information is completed and processed in accordance with industry 5.2 Installation and commissioning information is recorded in the required format and filed within the scheduled time-frame in accordance with industry 5.3 Further action required for plant and equipment is identified, recorded, and communicated to appropriate personnel in accordance with industry Please note Providers must be accredited by NZQA, or an inter-institutional body with delegated authority for quality assurance, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be accredited by NZQA before they can register credits from assessment against unit standards.
5 Page 5 of 5 Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards. Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource Comments on this unit standard Please contact the Electricity Supply Industry Training Organisation info@esito.org.nz if you wish to suggest changes to the content of this unit standard.
Carry out routine inspection and servicing on high voltage bulk oil circuit breakers
Page 1 of 6 Carry out routine inspection and servicing on high voltage bulk oil circuit breakers Level 4 Credits 6 Purpose People credited with this unit standard are able to: prepare for inspection, testing
More informationDemonstrate knowledge of servicing automotive air conditioning systems
Demonstrate knowledge of servicing automotive air conditioning systems 24448 version 1 Page 1 of 5 Level 3 Credits 2 Purpose This theory-based unit standard is for people in the automotive repair industry.
More informationDemonstrate knowledge of the fundamentals of power system earthing
Page 1 of 5 Demonstrate knowledge of the fundamentals of power system earthing Level 7 Credits 15 Purpose People credited with this unit standard are able to: compile an explanation on the purpose of earthing;
More informationNZQA registered unit standard version 5 Page 1 of 6. Operate hydro-electric generating plant from enterprise control room
Page 1 of 6 Title Operate hydro-electric generating plant from enterprise control room Level 6 Credits 16 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles
More informationInstruct a programme using low ropes course activities
Page 1 of 5 Instruct a programme using low ropes course activities Level 5 Credits 5 Purpose People credited with this unit standard are able to: prepare for instructing low ropes course activities; instruct
More informationPUBLIC SECTOR SERVICE DELIVERY Develop public sector service delivery objectives, and implement systems to meet client needs
1 of 5 level: 7 credit: 20 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationPUBLIC SECTOR SERVICE DELIVERY Establish client needs and gain agreement on requirements for public sector service delivery
1 of 5 level: 6 credit: 15 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and servicing on high voltage minimum oil circuit breakers
1 of 9 level: 4 credit: 6 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for inspection, testing
More informationAssist press operator on a reel-fed printing press
Page 1 of 5 Assist press operator on a reel-fed printing press Level 2 Credits 12 Purpose People credited with this unit standard are able to: follow safety requirements for the press being used; check
More informationSet up, repair and maintain a Baader BA 190 fish filleting machine
Set up, repair and maintain a Baader BA 190 fish filleting machine 17949 version 3 Page 1 of 6 Level 6 Credits 50 Purpose People credited with this unit standard are, for a Baader BA 190 fish filleting
More informationDemonstrate an advanced knowledge of railway signals
Page 1 of 5 Demonstrate an advanced knowledge of railway signals Level 4 Credits 15 Purpose People credited with this unit standard are able to: demonstrate an advanced knowledge of fixed railway signals,
More informationNZQA registered unit standard version 2 Page 1 of 5. Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident
Page 1 of 5 Title Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: the interrelated
More informationOperate a root crop harvester
Page 1 of 5 Operate a root crop harvester Level 4 Credits 20 Purpose People credited with this unit standard are able to: select and prepare root crop harvesting equipment and machinery; carry out field
More informationTransport perishable products by road
Page 1 of 5 Transport perishable products by road Level 4 Credits 25 Purpose This unit standard is for those who drive, or intend to drive, road transport vehicles transporting perishable products. People
More informationRemove and repair perforated non-structural body panel corrosion damage
Page 1 of 5 Remove and repair perforated non-structural body panel corrosion damage Level 3 Credits 3 Purpose This unit standard is for people who work in the motor body industry. People credited with
More informationMake ready a sheet-fed offset printing press for spot colour work
Make ready a sheet-fed offset printing press for spot colour work 26318 version 1 Page 1 of 5 Level 3 Credits 30 Purpose People credited with this unit standard are able to: check job documentation and
More informationUse advanced felling techniques in arboriculture
Page 1 of 5 Use advanced felling techniques in arboriculture Level 4 Credits 10 Purpose This unit standard is for people wishing to extend their tree felling skills in an arboriculture situation. People
More informationSet up, repair and maintain a Baader BA 212CK fish filleting machine
Page 1 of 5 Set up, repair and maintain a Baader BA 212CK fish filleting machine Level 6 Credits 50 Purpose People credited with this unit standard are, for a Baader BA 212CK fish filleting machine, able
More informationEstablish quality requirements, manage, and monitor the installation of subdivision infrastructure
Page 1 of 5 Establish quality requirements, manage, and monitor the installation of subdivision infrastructure Level 6 Credits 18 Purpose This unit standard is for people who are working, or who intend
More informationMaintain amenity trees and shrubs
Page 1 of 5 Maintain amenity trees and shrubs Level 3 Credits 8 Purpose People credited with this unit standard are able to: control weeds and ground cover under amenity trees and shrubs; describe irrigation
More informationPOULTRY MANAGEMENT Manage hatchery operations
1 of 5 level: 4 credit: 32 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Poultry Production People credited with this unit standard
More informationCarry out off-road motorcycle training
Page 1 of 5 Carry out off-road motorcycle training Level 5 Credits 10 Purpose People credited with this unit standard are able to: prepare for a training session in riding motorcycles off-road; conduct
More informationPUBLIC SECTOR COMPLIANCE MANAGEMENT Audit quality management systems for compliance with weights and measures legislation
1 of 6 level: 6 credit: 13 planned review date: December 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationSECURITY STAFF SERVICES Demonstrate knowledge of and operate electronic equipment as a security officer
1 of 5 level: 3 credit: 5 planned review date: March 2007 sub-field: purpose: Security This unit standard covers the use of electronic equipment for security s. People credited with this unit standard
More informationLEATHER - BOTTOM STOCK, MAKING AND LASTING Clean, dress, and spray footwear in a shoe room
1 of 6 level: 3 credit: 18 planned review date: November 2005 sub-field: purpose: entry information: accreditation option: moderation option: special notes: Footwear and Leather Trades People credited
More informationLEATHER - CUTTING AND CLOSING Perform specialist footwear closing operations
1 of 5 level: 2 credit: 9 planned review date: November 2005 sub-field: purpose: entry information: accreditation option: moderation option: special notes: Footwear and Leather Trades People credited with
More informationPOULTRY HATCHERY Process day-old poultry chicks
1 of 5 level: 3 credit: 10 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Poultry Production People credited with this unit standard
More informationNZQA registered unit standard version 1 Page 1 of 5. Diagnose and repair faulty electronic equipment to component level
Page 1 of 5 Title Diagnose and repair faulty electronic equipment to component level Level 4 Credits 40 Purpose This unit standard is intended for electronics technicians who are responsible for the diagnosis
More informationThis qualification has been revised. The last date to meet the requirements is 31 December 2021.
NZQF NQ Ref 0951 Version 7 Page 1 of 9 National Certificate in Electrical Engineering (Advanced Trade) (Level 5) with strands in Electrotechnology Specialisation, Electrical Installation, and Industrial
More informationIRRIGATION Demonstrate knowledge of irrigation systems, components, and performance
1 of 5 level: 4 credit: 6 planned review date: August 2006 sub-field: purpose: entry information: accreditation option: moderation option: Water Industry People credited with this unit standard are able
More informationVEHICLE BODYWORK Detail and groom a vehicle
1 of 5 level: 2 credit: 4 planned review date: December 2009 sub-field: purpose: entry information: accreditation option: moderation option: Motor Industry People credited with this unit standard are able
More informationNZQA unit standard version 6 Page 1 of 5. Apply and remove safety measures in an electricity supply environment
Page 1 of 5 Title Apply and remove safety measures in an electricity supply environment Level 3 Credits 3 Purpose People credited with this unit standard are able to: demonstrate knowledge of safe working
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2018.
NZQF NQ Ref 0880 Version 5 Page 1 of 7 National Certificate in Water Treatment (Level 4) Level 4 Credits 134 This qualification has been reviewed. The last date to meet the requirements is 31 December
More informationNZQA registered unit standard 9506 version 5 Page 1 of 5. Conduct a sample analysis in a petrochemical laboratory
Page 1 of 5 Title Conduct a sample analysis in a petrochemical laboratory Level 4 Credits 6 Purpose This unit standard is for people employed in the petrochemical industry. People credited with this unit
More informationNZQA registered unit standard version 1 Page 1 of 5. Develop, implement and review a HACCP application for a food processing operation
Page 1 of 5 Title Develop, implement and review a HACCP application for a food processing operation Level 5 Credits 20 Purpose This unit standard is for experienced people required to have in-depth knowledge
More informationROAD TRANSPORT OPERATIONS Manage the transport of overdimension and overweight loads by road
1 of 7 level: 5 credit: 10 planned review date: July 2009 sub-field: purpose: Commercial Road Transport This unit standard is intended for people who are involved with managing the despatch and/or supervision
More informationNZQA registered unit standard version 6 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of circuit protection Level 3 Credits 3 Purpose This unit standard is for electricians and related trades who need to understand and select devices for the protection
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Apply occupational health and safety requirements in the road transport and logistics industry Level 5 Credits 8 Purpose This unit standard is designed for team leaders, despatchers,
More informationDemonstrate knowledge of wool and the wool scouring process
Demonstrate knowledge of wool and the wool scouring process 2444 version 6 Page 1 of 5 Level 4 Credits 4 Purpose This unit standard is for people working in scouring or a related industry. People credited
More informationLevel 4. Credits Purpose
NZQF NQ Ref 0756 Version 3 Page 1 of 11 National Certificate in Flooring (Level 4) with strands in Carpet Installation, Fine Sand and Finishes, Flooring Planning and Design, Resilient Flooring Installation,
More informationThis qualification is expiring. The last date to meet the requirements is 31 December 2010.
NQF Ref 0209 Version 5 Page 1 of 11 National Certificate in Civil Construction Supervision with optional strands in Demolition; Drainage; Earthworks; Survey and Set Out; High Capacity Highways; Road Construction;
More informationPRINTING - SCREEN Make ready and print single colour for flat sheet screen printing
1 of 8 level: 3 credit: 40 planned review date: March 2009 sub-field: Printing replacement information: This unit standard, unit standard 5139, unit standard 5140, unit standard 5141, unit standard 5142,
More informationThis qualification is expiring. The last date to meet the requirements is 31 December 2010.
NQF Ref 0140 Version 4 Page 1 of 8 National Certificate in Energy and Chemical Plant (Process Operation) (Level 2) with optional strands in Steam Generation, Ancillary Operations, Geothermal, Waste Treatment,
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Demonstrate and apply knowledge of safe welding principles and quality assurance under supervision Level 2 Credits 4 Purpose This unit standard is for the training of mechanical engineering
More informationNZQA registered unit standard 9536 version 5 Page 1 of 6. Undertake petrochemical wellhead maintenance activities under supervision
Page 1 of 6 Title Undertake petrochemical wellhead maintenance activities under supervision Level 3 Credits 4 Purpose This unit standard applies to operational activities carried out on producing wellheads.
More informationNational Certificate in Energy and Chemical Plant (Boiler Operation) (Level 2)
NZQF NQ Ref 1342 Version 2 Page 1 of 5 National Certificate in Energy and Chemical Plant (Boiler Operation) (Level 2) Level 2 Credits 42 This qualification has been reviewed. The last date to meet the
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Describe drinking-water supply reticulation systems Level 5 Credits 8 Purpose People credited with this unit standard are able to describe: the reticulated services found on public and
More informationThis qualification is expiring. The last date to meet the requirements is 31 December 2010.
NQF Ref 0141 Version 5 Page 1 of 8 National Certificate in Energy and Chemical Plant (Process Operation) (Level 4) with optional strands in Refrigeration, Steam Generation, Ancillary Operations, Geothermal,
More informationNZQA registered unit standard 9537 version 5 Page 1 of 6. This unit standard applies to operational activities carried out on producing wellheads.
Page 1 of 6 Title Replace faulty petrochemical wellhead equipment Level 4 Credits 8 Purpose This unit standard applies to operational activities carried out on producing wellheads. People credited with
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Formulate event management strategies and coordinate event management services for a public relations event Level 6 Credits 10 Purpose This unit standard is for people who have, or seek
More informationNZQA Expiring unit standard 2272 version 8 Page 1 of 5
Page 1 of 5 Title Print single colour work on a reel-fed printing press Level 3 Credits 20 Purpose People credited with this unit standard are able to: demonstrate knowledge of factors affecting printing
More informationCONSENT AND MODERATION REQUIREMENTS (CMR) for Building and Construction
CONSENT AND MODERATION REQUIREMENTS (CMR) for Building and Construction Contact (version 9) The National Moderator Building and Construction Industry Training Organisation (BCITO) PO Box 2615 Wellington
More informationLevel 1 Demonstrate an understanding of managerial expertise and administrative capabilities
ID Code: 0009900F Level 1 Demonstrate an understanding of managerial expertise and administrative capabilities Credits 4 Purpose This unit standard is for entrepreneurs and those who aspire and have entrepreneural
More informationNZQA registered unit standard version 1 Page 1 of 7. Plan and fell trees using advanced techniques in a commercial forest harvesting operation
Page 1 of 7 Title Plan and fell trees using advanced techniques in a commercial forest harvesting operation Level 4 Credits 25 Purpose This unit standard is intended for professional tree fellers in a
More informationNZQA registered unit standard 738 version 5 Page 1 of 7
Page 1 of 7 Title Kiln dry timber Level 4 Credits 25 Purpose People credited with this unit standard are able to: demonstrate knowledge of kiln drying operations; demonstrate knowledge of dry and wet bulb
More informationCONSENT AND MODERATION REQUIREMENTS (CMR) for Plastics Processing Technology
CONSENT AND MODERATION REQUIREMENTS (CMR) for Plastics Processing Technology Contact (version 5) Quality Assurance Manager Competenz PO Box 9005 Newmarket Auckland 1149 Telephone 0800 526 1800 Fax 09 539
More informationACCREDITATION AND MODERATION ACTION PLAN for ServiceIQ Tourism and Travel Sectors
ACCREDITATION AND MODERATION ACTION PLAN for ServiceIQ Tourism and Travel Sectors Contact (version 5) ServiceIQ Chief Executive PO Box 25522 Wellington 6146 Telephone: 0800 863 693 Fax: 04 817 5399 Email:
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Operate the drill rig for horizontal directional drilling Level 3 Credits 15 Purpose People credited with this unit standard are able to: care for and maintain horizontal directional
More informationNZQA registered unit standard version 2 Page 1 of 5. Generate chlorine dioxide for wood pulp bleaching
Page 1 of 5 Title Generate chlorine dioxide for wood pulp bleaching Level 5 Credits 15 Purpose People credited with this unit standard are able to: explain fundamentals of chlorine dioxide generation;
More informationNZQA Expiring unit standard 2117 version 5 Page 1 of 5. Install, test, and maintain water supply backflow prevention devices
Page 1 of 5 Title Install, test, and maintain water supply backflow prevention devices Level 4 Credits 11 Purpose This unit standard is for people who work in the plumbing industry. People credited with
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2018.
NZQF NQ Ref 1344 Version 2 Page 1 of 20 National Certificate in Energy and Chemical Plant (Process Operation) with optional strands in Steam Generation; Turbine Operations; Waste Treatment; Refrigeration;
More informationTrainee Assessment Assess risk, develop risk management strategies, and prepare a risk management plan within a health organisation
Trainee Assessment Assess risk, develop risk management strategies, and prepare a risk management plan within a health organisation US 18686 V2 Level 5 Credits 6 Name Trainee assessment This trainee assessment
More informationFLORISTRY Create floristry designs using hand tied techniques
1 of 7 level: 3 credit: 20 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Horticulture People credited with this unit standard are able
More informationNZQA registered unit standard version 1 Page 1 of 7. Fell trees in a commercial forest harvesting operation
Page 1 of 7 Title Fell trees in a commercial forest harvesting operation Level 3 Credits 10 Purpose This unit standard is designed for people who work as a tree feller on a day-to-day basis in a commercial
More informationDOWNTOWN UNDERGROUND NETWORK SECONDARY SERVICES GUIDELINES
Guidelines effective March 5, 2007 NES is committed to providing safe, reliable electric service at a reasonable price for all of our customers. These guidelines offer direction for activities relating
More informationAssembling, wiring and testing electrical panels/components mounted in enclosures
Unit 035 Assembling, wiring and testing electrical Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to assemble,
More informationLevel 3 Diploma in Electrical Power Engineering - CT/VT Metering ( )
Level 3 Diploma in Electrical Power Engineering - CT/VT Metering (2339-34) Accreditation number: 500/7210/9 Qualification Units www.cityandguilds.com August 2009 Version V1 Contents About this document
More informationContents. Page. Moderator Guide, Ed. 1, June 2011 Page i
Contents Page Introduction... 1 Purpose of this Guide... 1 Moderation... 3 What is Moderation?... 3 Benefits of Moderation... 3 What do Moderators Do?... 4 What Makes an Effective Competenz Moderator?...
More informationConforming to General Health, Safety and Welfare in the Workplace
Unit Update A/503/1170: CONFORMING TO GENERAL HEALTH, SAFETY AND WELFARE IN THE WORKPLACE U s e f r o m 2 0 1 2 J a n u a r y This version of this unit replaces all previously published versions with effect
More informationSOUTH AFRICAN QUALIFICATIONS AUTHORITY REGISTERED QUALIFICATION: Occupational Certificate: Dispatching and Receiving Clerk
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2018.
NZQF NQ Ref 1412 Version 4 Page 1 of 20 National Certificate in Forest Operations Advanced (Level 4) with strands in Establishment and Silvicultural Operations Management, Production Tree Felling, Hauler
More informationOn successful completion of the Unit candidates will be able to carry out a simple earthing exercise on a simulated electrical installation.
National Unit Specification: general information CODE F5HE 11 SUMMARY This Unit is designed for candidates with little or no prior knowledge of earthing systems for electrical installations but who wish
More informationNational Certificate in Painting with optional strands in Wall Coverings, Spray Techniques, Specialised Coatings, and Industrial Coatings
NZQF NQ Ref 1071 Version 2 Page 1 of 9 National Certificate in Painting with optional strands in Wall Coverings, Spray Techniques, Specialised Coatings, and Industrial Coatings Level 3 Credits 116 This
More informationSERVICE LEVEL PROCEDURE
SERVICE LEVEL PROCEDURE METERING PROVIDER SERVICES PREPARED BY: AEMO MARKETS VERSION: 1.3 EFFECTIVE DATE: 01 DECEMBER 2017 STATUS: FINAL Approved for distribution and use by: APPROVED BY: PETER GEERS TITLE:
More informationQualification details
Outcome Statement Qualification details Title New Zealand Diploma in Business (Level 5) with strands in Accounting, Administration and Technology, Human Resource Management, Leadership and Management,
More informationIMI ACCREDITATION DIGITAL AUDIO BROADCASTING (DAB)
DIGITAL AUDIO BROADCASTING (DAB) What is IMI Accreditation? IMI Accreditation is a practical, non-academic way to demonstrate individual capability, providing independent proof of current competence, knowledge
More informationSkills CFA Assessment Strategy Competence units (S/NVQ)
Skills CFA Assessment Strategy Competence units (S/NVQ) Business Administration Customer Service Management and Leadership 2014 Skills CFA BA, CS, M&L Assessment Strategy: August 2014 (version 5.0) Page
More informationNZQA registered unit standard version 2 Page 1 of 5. Demonstrate knowledge of safety management systems for an aviation environment
Page 1 of 5 Title Demonstrate knowledge of safety management systems for an aviation environment Level 5 Credits 8 Purpose People credited with this unit standard are, for an aviation environment, able
More informationNational Certificate in Forestry (Generic Skills - Workplace Safety and Operations) (Level 2) Level 2
NZQF NQ Ref 1409 Version 4 Page 1 of 10 National Certificate in Forestry (Generic Skills - Workplace Safety and Operations) (Level 2) Level 2 Credits 44 This qualification has been reviewed. The last date
More informationReport of External Evaluation and Review
Report of External Evaluation and Review Devereux-Blum Training and Development Limited Highly Confident in educational performance Highly Confident in capability in self-assessment Date of report: 11
More informationVEHICLE BODYWORK Demonstrate knowledge of vehicle body and structural design principles
1 of 6 level: 5 credit: 6 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Motor Industry People credited with this unit standard are able
More informationSOUTH AFRICAN QUALIFICATIONS AUTHORITY REGISTERED QUALIFICATION: Occupational Certificate: Retail Supervisor
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is
More informationLevel 3 Principles, Practices and Legislation for the Periodic Inspection, Testing and Condition Reporting of Electrical Installations.
2395-302 Level 3 Principles, Practices and Legislation for the Periodic Inspection, Testing and Condition Reporting of Electrical Installations. www.cityandguilds.com April 2015 Version 1.0 Chief Examiner
More informationLevel 4 Diploma in Intelligence Operations (QCF) Qualification Specification
(QCF) Qualification Specification ProQual 2014 Contents Page Introduction 3 The Qualifications and Credit Framework (QCF) 3 Qualification profile 4 Rules of combination 4 Centre requirements 5 Support
More informationInternal Quality Assurance of Assessment Processes and Practice
Qualification Specification Internal Quality Assurance of Assessment Processes and Practice S A F E T Y T R A I N I N G A W A R D S S S A R D Version 17.1 2017 F E T Y T R A I N I N G A W A 1 This qualification
More informationAssessment Strategy for SVQs in. Supply Chain Management and Procurement
Assessment Strategy for SVQs in February 2014 Chartered Institute of Purchasing and Supply, Chartered Institute of Logistics and Transport (UK) and Skills for Logistics ACG Approved 5 March 2014 v.1 Introduction
More informationTECHNICAL SPECIFICATIONS & SPECIAL CONDITIONS OF CONTRACT FOR ELECTRICAL WORKS CHAPTER 1 SPECIAL CONDITIONS OF CONTRACT
TECHNICAL SPECIFICATIONS & SPECIAL CONDITIONS OF CONTRACT FOR ELECTRICAL WORKS CHAPTER 1 SPECIAL CONDITIONS OF CONTRACT 1.1 General 1.1.1 These Special Conditions of Contract supplement the General Instructions.
More informationQUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 4 NVQ Diploma in Spectator Safety Management (6852-04) October 2011 Version 1.0 Qualification at a glance Subject area City & Guilds number 6852 Spectator Safety Age group
More informationPearson Edexcel Level 4 NVQ Diploma in Management (QCF) Specification
Pearson Edexcel Level 4 NVQ Diploma in Management (QCF) Specification NVQ/Competence-based qualification First registration February 2014 Edexcel and BTEC qualifications are awarded by Pearson, the UK
More information2365 Assessment amendment FAQ s
2365 Assessment amendment FAQ s Q: What changes to 2365 have been made? A: As part of our ongoing review and improvement process the current assessments within 2365 at level 2 and 3 have been aligned to
More information[Registered Qual & Unit Std Home page] [Search Qualifications] [Search Unit Standards]
[Registered Qual & Unit Std Home page] [Search Qualifications] [Search Unit Standards] All qualifications and part qualifications registered on the National Qualifications Framework are public property.
More informationLevel 2 Award in Employee Rights and Responsibilities in the Logistic Industry (QCF)
Skillsfirst Awards Handbook Level 2 Award in Employee Rights and Responsibilities in the Logistic Industry (QCF) ERL02 Suite 215 Fort Dunlop Fort Parkway Birmingham B24 9FD www.skillsfirst.co.uk Contents
More informationQUALIFICATION DETAILS
QUALIFICATION DETAILS Qualification Title New Zealand Certificate in Frame and Truss Detailing (Level 4) Version 1 Qualification type Certificate Level 4 Credits 160 NZSCED 040399 Architecture and Building
More informationMANAGE SOCIAL SERVICES Facilitate the establishment or development of social service organisations
1 of 7 level: 6 credit: 6 planned review date: June 2006 sub-field: purpose: entry information: accreditation option: moderation option: Social Services People credited with this unit standard are able
More informationQUALIFICATION SPECIFICATION
QUALIFICATION SPECIFICATION Level 3 Diploma in Engineering Construction Maintenance (RQF) Contains the following pathways: - Electrical - Instrumentation and control - Mechanical QS-Engineering Construction
More informationSOUTH AFRICAN QUALIFICATIONS AUTHORITY CORE UNIT STANDARDS IN NATIONAL CERTIFICATE: USE OF FIREARMS NQF LEVEL 4.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY CORE UNIT STANDARDS IN NATIONAL CERTIFICATE: USE OF FIREARMS NQF LEVEL 4. UNIT STANDARD REFERENCE NUMBER: 10754 TITLE: Use of a shotgun. LEVEL: 4 CREDITS: 10 FIELD:
More informationPearson Edexcel Level 2 Diploma in Transporting Goods by Road
Pearson Edexcel Level 2 Diploma in Transporting Goods by Road Specification Competence-based qualification First registration August 2013 Issue 2 Edexcel, BTEC and LCCI qualifications Edexcel, BTEC and
More informationABBE Level 3 Award in Understanding the Party Wall etc. Act 1996 (QCF)
ABBE Level 3 Award in Understanding the Party Wall etc. Act 1996 (QCF) Qualification Handbook Page 1 of 16 CONTENTS PART 1 Introduction... 3 1.1 About The Awarding Body for the Built Environment (ABBE)...
More informationSpecification Technical Requirements for Revenue Electricity Meters
Specification Technical Requirements for Revenue Electricity Meters Standard Number: HPC-8DJ-16-0001-2013 Document Control Author Name: Richard Flett Position: Metering Technician Document Owner (May also
More informationLevel 3 NVQs in Refrigeration and Air Conditioning (6187) Qualification handbook for centres
Level 3 NVQs in Refrigeration and Air Conditioning (6187) Qualification handbook for centres www.cityandguilds.com October 2017 Version 2.1 About City & Guilds As the UK s leading vocational education
More information