Head Office # Street SE Calgary, Alberta, Canada T2G 1N6 TEL FAX

Transcription

1 Head Office # Street SE Calgary, Alberta, Canada T2G 1N6 TEL FAX European Office Poland Ul. Jerzego Szaniawskiego , Łódź Poland poland@sumltd.com Northern Sales Office Fort McMurray, Alberta, Canada TEL FAX ftmcmurray@sumltd.com Central Sales Office Edmonton, Alberta, Canada TEL FAX edmonton@sumltd.com Toll Free

2 Corporate Summary SUM LTD is a Calgary, Alberta, Canada based manufacturer of heat and sound isolation solutions. SUM LTD designs and manufactures Custom, High Quality, Removable, Reusable, Flexible Insulation Blankets. SUM has grown in leaps and bounds from a one man company in 1991, into three sales offices and two manufacturing facilities. The facilities have the capability of designing and fabricating insulation products for Heat, Cold and Decibel isolation for a wide range of applications. At 20,000sq/ft SUM LTD has the ability to manufacture large quantity orders while still maintaining on time deliveries. SUM LTD reusable blankets can be used for Valves, Flanges, Instrumentation, Heat Exchangers, Engine manifolds and exhausts, Man ways, and Gas & Steam Turbines. Applications needing maintenance are prime candidates for this product. SUM LTD is fully ISO 9001:2000 certified. Quality procedures are in place to monitor production in order to ensure product quality. These procedures assist in large product orders, for delivery of the right product to the right location at the right time. SUM LTD also upholds a Safety Certification of Recognition from the Manufactures Health and Safety Association. SUM pride s itself on safety. Since the inception of the safety program in 2004 there have been zero workplace accidents. In 2005 Human Resources Canada recognized SUM LTD as model company with the BEST SAFETY PERFORMER award. SUM LTD works with a range of companies including insulation contactors, OEMs, oil and gas producers/refiners and end users. Janusz Komorowski President

3 Corporate Summary

4 Benefits of SUM LTD Insulation Products SUM LTD strives to offer technically advanced and innovative solutions to Heat and Sound isolation. These benefits include protection and cost savings. Equipment Protection Freeze protection solutions are built using our blankets insulating properties and trace heating (Glycol, Electric, Steam). We partner with various providers to offer the best heating options. Extreme conditions can be very damaging to equipment. To reduce the damage from rapid heating and cooling, equipment can be covered with insulated blankets. These blankets help to maintain a constant temperature thus reducing the stress on the equipment and increasing its longevity. Welding sparks and slag can cause fires and burns if not actively contained. SUM LTD builds custom and standard size welding blankets for a range of applications. Whatever your temperature needs are, SUM LTD can design a solution to protect you. Personnel Protection Heated equipment is a safety hazard for personnel. Anyone working around this equipment runs the risk getting burnt. Blankets can help reduce this risk by shielding personnel from hazardous heated equipment. In an environment with noise levels at 85 decibels, Occupational Health and Safety allows employees to work no more that 8 hours per shift. By containing the noise within a well designed blanket you can lower decibel transmission by as much as 15 decibels*. Cost Savings Process Heating and Heat Isolation solutions are applicable for oil and gas refineries. SUM designs blankets to fit tightly to applications allowing the maximum heat containment. Heat containment is typically used on equipment operating between 100 F F. For example; without a cover, a heated 6 ANSI 150 gate valve can cost as much as $ CAD per year in heat loss**. The energy savings using a SUM LTD blanket would cover its costs on average in 6-12 months. SUM LTD offers technically advanced solutions to complex insulation needs. This catalogue is to be used as a sales tool and a reference guide. Any additional information can be attained from SUM LTD s Offices. HOW CAN WE COVER YOUR NEEDS? * See graph in acoustic section, contact SUM LTD for more information ** Study done by the U.S. Department of Energy, see next page for more details and contact SUM LTD for a full copy of the report

5 Thermal Solutions Standard Valve Covers SUM LTD custom manufactures valve covers for a wide range of valves. Valve covers are designed to cover each of the flanged ends and sit tightly against the hard insulation. Additionally there are 2 flaps on each end to close off the cover. Nomex cord tie straps stop elements (wind, rain, oil, sand, etc) from entering into the blanket. SUM BENEFITS SUM LTD s blankets provide excellent freeze protection when coupled with heat tracing (electric, stream or glycol). Personnel protection is important in areas where surfaces can cause burns due to high operating temperatures. The costs of SUM Blankets are recouped in an expedited manner due to the double cost savings; first, SUM blankets reduce the heat loss over the surface of the valve thus reducing the cost of energy needed to heat the application. Second, a quick installation time without tools allows for work to be done quickly and efficiently. *These valve blankets shown do not have bonnets, see next pages for valves with bonnets. Materials Teflon Jacket (rated to 500ºF) Tecmat Insulation (2, see wall construction) Stainless steel D rings, pins and washers Velcro, Nomex cord, and Teflon strap fasteners Aluminum identification tag Other materials that can be used for construction include Silicon, and Tecstar jackets and liners

6 Field Drawing

7 Field Drawing

8 Thermal Solutions Standard Valve Covers SUM LTD manufactures covers for a range of valves. The covers shown here are built with a bonnet to cover over the handle and neck of the valve, for complete protection. SUM BENEFITS SUM LTD s blankets provide excellent freeze protection when coupled with heat tracing (electric, stream or glycol). Personnel protection is important in areas where surfaces can cause burns due to high operating temperatures. The costs of SUM Blankets are recouped in an expedited manner due to the double cost savings; first, SUM blankets reduce the heat loss over the surface of the valve thus reducing the cost of energy needed to heat the application. Second, a quick installation time without tools allows for work to be done quickly and efficiently. Materials Teflon cloth Jacket (rated to 500ºF) Tecmat Insulation Velcro Fasteners Stainless steel D rings, pins & washers Nomex cord Aluminum identification tag

9 Field Drawing

10 Field Drawing

11 Field Drawing

12 Thermal Solutions Flange Solutions SUM LTD manufactures flange covers for a variety of sizes and needs. SUM LTD s blankets offer quick install and removal times. This cost effective way of wrapping flanges allows for quick response time to possible leaks at the joint. SUM LTD can build in drainage holes at the bottom to allow liquids to easily escape. This design allows for early detection of leaks at the flange, while still protecting if from the elements and insulating it for heat retention. SUM LTD can build them with or without drawstring flaps, depending on what the requirements for the flange are. SUM BENEFITS SUM LTD s blankets provide excellent freeze protection when coupled with heat tracing (electric, stream or glycol). Personnel protection is important in areas where surfaces can cause burns due to high operating temperatures. The costs of SUM Blankets are recouped in an expedited manner due to the double cost savings; first, SUM blankets reduce the heat loss over the surface of the valve thus reducing the cost of energy needed to heat the application. Second, a quick installation time without tools allows for work to be done quickly and efficiently. Materials Silicon Jacket (rated to 500ºF) Tecmat Insulation Stainless steel D rings, pins and washers Nomex cord Velcro Fasteners Aluminum identification tag Other materials that can be used for construction include Teflon and Tecstar for liners.

13 Field Drawing

14 Thermal Solutions Instrumentation Covers SUM LTD manufactures a wide range of instrumentation covers. These covers are CUSTOM designed to offer both easy access to the instrument, and superior protection from hydrocarbons and extreme temperatures. SUM instrumentation covers are manufactured to allow one operator without tools the ability to install the covers, quickly and efficiently. This is accomplished by using Velcro fasteners (as seen below), or for higher temperatures flame resistant Teflon straps and Nomex cords are used. Common equipment that is covered includes Level gauges, level controllers, DP transmitters, regulators, and actuators. SUM instrumentation covers act as a barrier to help protect the instrumentation from the external and internal environment, for instance freeze protection or sand blasting. Vinyl windows can be incorporated into the blanket to allow the operator to view the equipment without removing the blanket. Materials Teflon cloth Jacket (rated to 500ºF) Tecmat Insulation Velcro Fasteners, straps Aluminum identification tag Vinyl viewing windows (as needed) Other materials that can be used

15 Field Drawing

16 Field Drawing

17 Thermal Solutions Heat Exchanger Covers SUM LTD builds covers for heat exchangers. Increasing efficiency of a heated application while still maintaining 100% accessibility is a necessity for heat exchanges. SUM LTD can build covers that completely cover the units or just end flanges depending on the requirements. SUM LTD designs blankets with 2 flaps on each end to close off the cover. Nomex cord tie straps and Velcro, stop elements (wind, water, oil, sand, etc) from entering into the blanket. SUM BENEFITS SUM LTD s blankets provide excellent freeze protection when coupled with heat tracing (electric, stream or glycol). Personnel protection is important in areas where surfaces can cause burns due to high operating temperatures. The costs of SUM Blankets are recouped in an expedited manner due to the double cost savings; first, SUM blankets reduce the heat loss over the surface of the valve thus reducing the cost of energy needed to heat the application. Second, a quick installation time without tools allows for work to be done quickly and efficiently. Materials Silicon or Teflon Jacket (rated to 500ºF) Tecmat Insulation (thickness varies) Teflon or Tecstar Liners Stainless steel D rings, pins and washers Velcro and Nomex Cord Fasteners Aluminum identification tag

18 Field Drawing

19 Thermal Solutions Engine Covers SUM LTD manufactures manifold, turbo and exhaust covers for a wide range of engines. The covers are built to the specifications and needs of the specific engine. Engines can be covered with oil resistant materials or other high temperature materials to avoid hot spots where fires could easily start. The main use for an exhaust cover is to lower the risk high heat surface exposure. Isolating the exhaust can help lower the operating temperature of an engine room while protecting the surrounding components. These blankets are manufactured to be easily removed for scheduled maintenance. SUM of BENEFITS Personnel protection is important in areas where surfaces can cause burns do to high operating temperatures. SUM blankets reduce the chance of fires starting on the exhaust systems and burning the engine or setting off a costly fire suppression unit that decreases productivity with clean-up downtime. Materials Teflon cloth Jacket (rated to 500ºF) Tecmat Insulation Possible Liner Materials Silverflex, Tecstar, or Silica and Mesh Teflon Straps and Nomex cord Stainless steel D ring, pins & washers Aluminum identification tag

20 Field Drawing

21 Field Drawing

22 Thermal Solutions Turbine Covers SUM LTD manufactures gas and steam turbine covers and associated pieces. SUM LTD can install turbine covers in a short period of time with a small team of installers. Pieces are custom manufactured on site to fit to the intricate designs of any turbine. SUM LTD can use a range of materials to accommodate a range of operating temperatures and requirements. SUM LTD builds with safe, non carcinogenic ceramic fibers. The carcinogenic qualities form when ceramic fibers are heated to high temperatures. For this reason SUM LTD ONLY uses Fiberglass, Silica and Basalt products for turbines. SUM BENEFITS. The costs of SUM Blankets are recouped in an expedited manner due to the double cost savings; first, a fast install time with only hand tools allows for work to be done quickly keeping labour costs down. Second, the SUM blankets reduce the heat loss over the surface of the turbine thus limiting lost energy. Materials Teflon or 4 ply aluminum Jacket (500 F) Tecmat or Basalt Insulation ( F) Tecstar or Silica and Mesh liner ( F) Stainless steel D rings, wire, pins and washers Aluminum Identification Tag

23 Trace Wrap Solutions Trace Wrap SUM LTD produces a simple, flexible pipe insulation solution. This silicon and Tecmat wrap is designed as a cost efficient alternative to custom built blankets. SUM LTD s trace wrap is manufactured with the insulation sewn on to only one edge of the silicone. This eliminates bunching or warping of the insulation when it is wrapped around a pipe. Trace Wrap Benefits Flexible pipe wrap Cost Effective Easy to install and remove No bunch design Materials Silicon cloth Jacket (rated to 500ºF) Tecmat Insulation Velcro Fasteners Teflon thread NPS (inches) Outside Diameter (inches) Insulation (inches) Insulation (inches) $/foot (up to 100 ft) $/foot (over 100 ft) $/foot (up to 100 ft) $/foot (over 100 ft) ½ ½ ¾ ½ ½ ½ ½ ½

24 Acoustical Solutions Decibel Reducing Covers SUM LTD manufactures flexible, removable acoustic blankets for decibel transmission loss. These blankets work well with pumps, compressors, and vibrating equipment. Construction of the blankets consists of teflon, insulation, and an internal septum to absorb sound waves. SUM uses a flexible Barium Septum Vinyl as a noise barrier. Acoustic blankets effectively reduce decibels between 250Hz and 5000Hz. Applications emitting 315Hz and 1600Hz will have the greatest success with SUM LTD blankets. Please see the graph and chart on the following page for more details. Materials Silicon or Teflon Jacket (rated to 500ºF) Tecmat Insulation Barium Septum Vinyl (180 F) or Lead sheet Teflon Liners Stainless steel pins and washers Velcro and Nomex Cord Fasteners Aluminum identification tag

25 Acoustical Solutions Decibel Reducing Covers The following data for SUM LTD s acoustic insulation covers was prepared by the Mechanical Engineering Acoustics and Noise Unit at the University of Alberta in Canada, December For a detailed copy of the conditions and parameters of the report, please contact SUM LTD s head office. * Delta One and Delta Half refer to 1 and ½ inch insulation respectively.

26 Welding & Heat Isolation Welding Blankets SUM LTD manufactures welding blankets for a range of requirements. Our blankets can be sub-divided into two main categories; silicone impregnated fiberglass and woven silica. Techweld products offer an oil proof and abrasion resistant blanket for spark protection. Lite, and Ultra products offer excellent spark and slag protection. Dura and Irish offer superior spark and slag protection. These levels were created to offer a range of products for a range of protection needs. (see MSRPs listed below call for distribution pricing) Techweld 32 Duraweld AR96 Irishweld 40 Techweld 32 Irishweld 40 Name Size and Price Part Number Size and Price Part Number TECHWELD 20 5 X 5 $84.98 TW X 8 $ TW2058 TECHWELD 32 5 X 5 $ TW X 8 $ TW3258 WELDLITE 18 5 X 5 $ WL X 8 $ WL1858 ULTRAWELD 48 5 X 5 $ UW X 8 $ UW4858 ULTRAWELD 96 5 X 5 $ UW X 8 $ UW9658 DURAWELD AR48 5 X 5 $ DW X 8 $ DW4858 DURAWELD AR96 5 X 5 $ DW X 8 $ DW9658 IRISHWELD 40 5 X 5 $ IRW X 8 $ IRW4058

27 Welding & Heat Isolation Stress Relief Pads SUM LTD builds heat isolation pads for a range of welding industry requirements. For high temperatures or for welding with stainless steel where chloride contamination becomes an issue, we can build with various types of silica and stainless steel mesh rated for up to a continuous 2300 F. For lower temperatures, we build pads using a silicon impregnated fiberglass (red side) and a vermiculite treated silica (tan side) rated for 1500 F. Our blankets can be custom designed and built to suit your exact needs. Straps can be pinned to the blankets for tight fitting applications. Also, SUM can incorporate hooks and grommets into any blanket. Materials Teflon cloth Jacket (rated to 500ºF) Tecmat Insulation Possible Liner Materials Tecstar, or Silica and Mesh Teflon Straps & Stainless steel D rings, pins & washers Aluminum id tag SUM LTD s lower temperature pads come in standard sizes that you can order right off our shelves. SUM can also custom build blankets to meet your needs, see samples below. 12 X 12 (P/N: HIP1212) - $ 63.94* 18 X 18 (P/N: HIP1818) - $118.80* 24 X 24 (P/N: HIP2424) - $194.53* 36 X 36 (P/N: HIP3636) - $337.50* *These are Manufactures Suggested Retail Prices call of Distributor pricing.

28 Technical Data Sheets Silicon Cloth ss TEMPERATURE RESISTANCE -67 F TO 500 F* FED STD-191A-M5903 BASE FABRIC COLOR AND COATING FIBERGLASS / SATIN WEAVE GREY SILICON WEIGHT 17.5 oz / yd 2 +/- 10% ASTM-D THICKNESS / ASTM-D TENSILE STRENGTH W x F TEAR STRENGTH W x F SIZE AND WEIGHT 300 x 225 lbs / in ASTM-D x 50 lbs ASTM-D x 50 yds 95 lbs ADVANTAGES WATER AND OIL RESISTANT FLAME RETARDANT LOW SMOKE LIGHTWEIGHT APPLICATIONS REMOVABLE INSULATION BLANKETS EQUIPMENT COVERS FLANGE COVERS TRACE WRAPS *Although base fabric is rated to 1000 F continuous operating temperature, the silicon coating is rated to 500 F on a continuous basis. THE INFORMATION PRESENTED IS INTENDED AS A SPECIFICATION GUIDE ONLY. MATERIALS SHOULD BE TESTED FOR ITS SUITABILITY IN ANY APPLICATION. USER'S SHOULD ALSO FAMILIARIZE THEMSELVES WITH THE MSDS BEFORE HANDLING. NO WARRANTIES ARE EXPRESSED OR IMPLIED AS APPLICATION CONDITIONS ARE BEYOND OUR CONTROL. ALL TECHNICAL DATA REPRESENTED HERE HAS BEEN SUPPLIED TO US BY OUR SUPPLIERS.

29 Technical Data Sheets Teflon Coated Fabric EJ1400 TEMPERATURE RESISTANCE CONTINUOUS USE BASE FABRIC COLOR AND COATING -67 to 500 F FIBREGLASS GREY / PTFE WEIGHT 14 oz / yd 2 +/- 10% THICKNESS /- 10% SIZE AND WEIGHT 60 x 50 yds 75 lbs ADVANTAGES EXCELLENT CHEMICAL RESISTANCE EXCELLENT TEMPERATURE EXPOSURE CAPABILITIES EASILY SEWN FLAME RETARDANT APPLICATIONS REMOVABLE INSULATION PADS FLANGE, VALVE AND PUMP COVERS EQUIPMENT COVERS THE INFORMATION PRESENTED IS INTENDED AS A SPECIFICATION GUIDE ONLY. MATERIALS SHOULD BE TESTED FOR ITS SUITABILITY IN ANY APPLICATION. USER'S SHOULD ALSO FAMILIARIZE THEMSELVES WITH THE MSDS BEFORE HANDLING. NO WARRANTIES ARE EXPRESSED OR IMPLIED AS APPLICATION CONDITIONS ARE BEYOND OUR CONTROL. ALL TECHNICAL DATA REPRESENTED HERE HAS BEEN SUPPLIED TO US BY OUR SUPPLIERS.

30 Technical Data Sheets Teflon Coated Fabric EJ1650 TEMPERATURE RESISTANCE CONTINUOUS USE BASE FABRIC COLOR AND COATING -67 to 500 F FIBREGLASS GREY / PTFE LIGHT BROWN UNDERSIDE WEIGHT 16.5 oz / yd 2 +/- 10% THICKNESS /- 10% SIZE AND WEIGHT 60 x 50 yds 75 lbs ADVANTAGES EXCELLENT CHEMICAL RESISTANCE EXCELLENT TEMPERATURE EXPOSURE CAPABILITIES EASILY SEWN FLAME RETARDANT APPLICATIONS REMOVABLE INSULATION PADS FLANGE, VALVE AND PUMP COVERS EQUIPMENT COVERS THE INFORMATION PRESENTED IS INTENDED AS A SPECIFICATION GUIDE ONLY. MATERIALS SHOULD BE TESTED FOR ITS SUITABILITY IN ANY APPLICATION. USER'S SHOULD ALSO FAMILIARIZE THEMSELVES WITH THE MSDS BEFORE HANDLING. NO WARRANTIES ARE EXPRESSED OR IMPLIED AS APPLICATION CONDITIONS ARE BEYOND OUR CONTROL. ALL TECHNICAL DATA REPRESENTED HERE HAS BEEN SUPPLIED TO US BY OUR SUPPLIERS.

31 Technical Data Sheets Silverflex 910sf TEMPERATURE RESISTANCE F to F FED SPEC HHP-100B BASE FABRIC AND WEAVE COLOR PTFE impregnated FIBERGLASS METALLIC SILVER WEIGHT 14.8 oz to 15.5 oz/yd 2 ASTM-D TENSILE STRENGTH WARP: 300lbs/ inch FILL: 250lbs/ inch ASTM-D ASTM-D THICKNESS / ASTM-D TEAR STRENGTH WARP: 30lbs/ inch FILL: 20lbs/ inch ASTM-D ASTM-D Dielectric Strength 500 Volts/ Mil ASTM-D a ADVANTAGES SUPERIOR CHEMICAL RESISTANCE EXCELLENT TEMPERATURE EXPOSURE CAPABILITIES EXCEPTIONAL DIELECTRIC PROPERTIES SUPER SMOOTH LOW FRICTION APPLICATIONS THERMAL INSULATION FOR VERY HIGH TEMPERATURES GASKETS AND SEALS FOR HARSH CHEMICAL ENVIRONMENTS THE INFORMATION PRESENTED IS INTENDED AS A SPECIFICATION GUIDE ONLY. MATERIALS SHOULD BE TESTED FOR ITS SUITABILITY IN ANY APPLICATION. USER'S SHOULD ALSO FAMILIARIZE THEMSELVES WITH THE MSDS BEFORE HANDLING. NO WARRANTIES ARE EXPRESSED OR IMPLIED AS APPLICATION CONDITIONS ARE BEYOND OUR CONTROL. ALL TECHNICAL DATA REPRESENTED HERE HAS BEEN SUPPLIED TO US BY OUR SUPPLIERS.

32 Technical Data Sheets Tecstar 18 TEMPERATURE RESISTANCE CONTINUOUS INTERMITTENT 1000 F 1500 F (WITH A RADIANT HEAT SOURCE) NOTE: MATERIAL SHOULD BE TESTED FOR ITS SUITABILITY IN ANY APPLICATION WHERE FLEXING OR VIBRATION OCCURS AT ELEVATED TEMPERATURES. BASE FABRIC AND WEAVE COLOR AND COATING 100% FIBERGLASS / PLAIN BEIGE VERMICULITE* COATING * VERMICULITE IS A 100 % INORGANIC, CHEMICALLY INERT, NON-COMBUSTIBLE, ODORLESS COATING. WEIGHT 18 oz / yd 2 +/- 10% THICKNESS " +/- 10% STANDARD ROLL 40 & 60 x 50 yds APPLICATIONS WELDING CURTAINS DROP CLOTH REMOVABLE COVERS THE INFORMATION PRESENTED IS INTENDED AS A SPECIFICATION GUIDE ONLY. MATERIALS SHOULD BE TESTED FOR ITS SUITABILITY IN ANY APPLICATION. USER'S SHOULD ALSO FAMILIARIZE THEMSELVES WITH THE MSDS BEFORE HANDLING. NO WARRANTIES ARE EXPRESSED OR IMPLIED AS APPLICATION CONDITIONS ARE BEYOND OUR CONTROL. ALL TECHNICAL DATA REPRESENTED HERE HAS BEEN SUPPLIED TO US BY OUR SUPPLIERS.

33 Technical Data Sheets Tecsil 1800 Silica Cloth TEMPERATURE RESISTANCE 1800 F (continuous) FM STANDARD 4950 WELDING CURTAINS* MELT TEMPERATURE CONTENT WEAVE COLOR 3000 F 96% SILICA (MINIMUM) 4 HARNESS CROW S FOOT LIGHT TAN WEIGHT 18 oz / yd 2 +/- 10% THICKNESS /- 10% SIZE 36 x 50 lyds COUNT WARP: 30 FILL: 17 FEATURES ABRASION RESISTANT COATING AVAILABLE FOR ADDED DURABILITY NOTE: MATERIAL SHOULD BE TESTED FOR ITS SUITABILITY IN ANY APPLICATION WHERE FLEXING OR VIBRATION OCCURS AT ELEVATED TEMPERATURES. * NOTE: WELDING PADS AND WELDING BLANKETS MAY ALSO BE USED AS WELDING CURTAINS. THE INFORMATION PRESENTED IS INTENDED AS A SPECIFICATION GUIDE ONLY. MATERIALS SHOULD BE TESTED FOR ITS SUITABILITY IN ANY APPLICATION. USER'S SHOULD ALSO FAMILIARIZE THEMSELVES WITH THE MSDS BEFORE HANDLING. NO WARRANTIES ARE EXPRESSED OR IMPLIED AS APPLICATION CONDITIONS ARE BEYOND OUR CONTROL. ALL TECHNICAL DATA REPRESENTED HERE HAS BEEN SUPPLIED TO US BY OUR SUPPLIERS.

34 Technical Data Sheets Techweld 20oz TEMPERATURE RESISTANCE 500 F* BASE FABRIC AND WEAVE FIBERGLASS*/HERINGBONE 96% min. silica content FLAME RESISTANCE Char Length 0.3 inch FTMS 19A/M Flame Out 1 second Afterglow 2.5 seconds COLOR AND COATING RED IMPREGNATED SILICON* TENSILE STRENGTH W X F TEARING STRENGTH W X F 300W X 300F lbs/in 45W X 45lbs/in FTMS 191A/M5102 FTMS 191A/M5136 WEIGHT 20 oz / yd 2 +/- 10% THICKNESS.025+/- 10% SIZE AND WEIGHT 38 x 50 LYDS 60 x 50 LYDS 70 lbs 110 LBS APPLICATIONS WELDING BLANKETS WELDING CURTAINS TECHWELD RSL IS A FIBERGLASS BASE FABRIC WHICH HAS BEEN IMPREGNATED WITH CURED SILICONE RUBBER.THE SILICONE COATING ADDS EXTENDED LIFE WHILE PROVIDING GREATER OIL AND WATER RESISTANCE THAN UNCOATED FABRICS, AS WELL AS LOW SMOKE AND FLAME RETARDANCY. * ALTHOUGH THE BASE FABRIC IS RATED TO 1000 F CONTINUOUS OPERATING TEMPERATURE, THE SILICONE COATING IS RATED AT 500 F ON CONTINUOUS BASIS. THE INFORMATION PRESENTED IS INTENDED AS A SPECIFICATION GUIDE ONLY. MATERIALS SHOULD BE TESTED FOR ITS SUITABILITY IN ANY APPLICATION. USER'S SHOULD ALSO FAMILIARIZE THEMSELVES WITH THE MSDS BEFORE HANDLING. NO WARRANTIES ARE EXPRESSED OR IMPLIED AS APPLICATION CONDITIONS ARE BEYOND OUR CONTROL. ALL TECHNICAL DATA REPRESENTED HERE HAS BEEN SUPPLIED TO US BY OUR SUPPLIERS.

35 Technical Data Sheets Flexible Vinyl Noise Barrier TEMPERATURE RANGE -20º F to 180º F NOTE: MATERIAL SHOULD BE TESTED FOR ITS SUITABILITY IN ANY APPLICATION WHERE FLEXING OR VIBRATION OCCURS AT ELEVATED TEMPERATURES. BASE FABRIC AND WEAVE COLOR AND COATING 100% FIBERGLASS / PLAIN MATTE BLACK THICKNESS " +/- 10% CHEMICAL Good resistance to grease, oil, dust, dirt, salts and alkalis STANDARD ROLL TENSILE STRENGTH ELONGATION TEAR STRENGTH 55 Wide X 240 Long 400 Avg. Min 100% Avg. Min 80 lbs/in Avg Min ASTM D412 Die C ASTM D412 Die C ASTM D624 APPLICATIONS LOW TEMPURATURE NOISE REDUCTION BLANKETS THE INFORMATION PRESENTED IS INTENDED AS A SPECIFICATION GUIDE ONLY. MATERIALS SHOULD BE TESTED FOR ITS SUITABILITY IN ANY APPLICATION. USER'S SHOULD ALSO FAMILIARIZE THEMSELVES WITH THE MSDS BEFORE HANDLING. NO WARRANTIES ARE EXPRESSED OR IMPLIED AS APPLICATION CONDITIONS ARE BEYOND OUR CONTROL. ALL TECHNICAL DATA REPRESENTED HERE HAS BEEN SUPPLIED TO US BY OUR SUPPLIERS.

36 Technical Data Sheets Tecmat HD Needled Mat Insulation COMPOSITION 100% E GLASS THICKNESS ¼ ½ ¾ 1 DENSITY 9 lbs./cu. ft 9 lbs./cu. ft lbs./cu. ft 11.3 lbs./cu. ft STANDARD ROLL SIZE 60 x x x x 45 STANDARD ROLL SIZE 750 sq. ft 375 sq. ft 225 sq. ft 225 sq. ft TEMPERATURE RATING 1200 F max TEMPERATURE APPARENT THERMAL CONDUCTIVITY (K Factor) R Value 100 F 0.28 BTU in./hr./sq.ft./ F F 0.40 BTU in./hr./sq.ft./ F F 0.50 BTU in./hr./sq.ft./ F F 0.65 BTU in./hr./sq.ft./ F 1.54 CHRACTERISTICS: Asbestos free, non-respirable E-Glass fibers average fiber diameter minimum fiber diameter Non-flammable Will not decay or sustain mold growth ASTMC flame spread / 0 smoke generated Fibers are mechanically interlocked (no organic binders) / retains integrity upon heating Excellent sound absorption properties ( NRC available upon request) APPLICATIONS Removable pads Muffler & exhaust insulation Thermal & acoustic insulation Industrial furnaces & Ovens Ship turbines Power generation equipment Filtration Marine/industrial/process piping THE INFORMATION PRESENTED IS INTENDED AS A SPECIFICATION GUIDE ONLY. MATERIALS SHOULD BE TESTED FOR ITS SUITABILITY IN ANY APPLICATION. USER'S SHOULD ALSO FAMILIARIZE THEMSELVES WITH THE MSDS BEFORE HANDLING. NO WARRANTIES ARE EXPRESSED OR IMPLIED AS APPLICATION CONDITIONS ARE BEYOND OUR CONTROL. ALL TECHNICAL DATA REPRESENTED HERE HAS BEEN SUPPLIED TO US BY OUR SUPPLIERS.

37 Product Samples Product Name: Silicon 3100 Temperature: - 67 to 500 F Product Description: Fiberglass impregnated with silicon Product Name: Teflon EJ 1400 Temperature: -67 to 500 F Product Description: Fiberglass impregnated with Teflon Material Color: Glossy Grey Material Color: Matte Grey Product Name: Teflon EJ 1650 Temperature: -67 to 500 F Product Description: Fiberglass impregnated with Teflon Product Name: Silverflex 910 SF Temperature: -415 to 600 F Product Description: Smooth PTFE impregnated Fiberglass Material Color: Bronze and Grey Material Color: Metallic Silver Product Name: Tecstar 18 Temperature: 1000 to 1500 F Product Description: Vermiculite coated Fiberglass Product Name: Tecsil 1800 Silica Temperature: 1800 to 3000 F Product Description: 96 % silica minimum Material Color: Matte Gold Material Color: Beige Product Name: Techweld 20 Temperature: 500 to 1000 F see technical data sheet for further explanation Product Description: Fiberglass and Herringbone (96% silica) impregnated with silicone Material Color: Dark Red Product Name: Vinyl Noise Barrier Temperature: -20 to 180 F Product Description: Fiberglass, thick textured Barium Septum Material Color: Matte Black

38 Printed in November 2006