SECTION PLASTIC TOILET COMPARTMENTS

Size: px
Start display at page:

Download "SECTION PLASTIC TOILET COMPARTMENTS"

Transcription

1 PART1 GENERAL 1.01 SECTION INCLUDES A. Phenolic toilet compartments. B. Urinal and vestibule screens REFERENCE STANDARDS SECTION PLASTIC TOILET COMPARTMENTS A. ASTM A666- Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar; ADMINISTRATIVE REQUIREMENTS A. Coordination: Coordinate the work with placement of support framing and anchors in walls and ceilings SUBMITTALS A. See Section Submittals, for submittal procedures. B. Shop Drawings: Indicate partition plan, elevation views, dimensions, details of wall supports, door swings. C. Product Data: Provide data on panel construction, hardware, and accessories. D. Samples: Submit two samples of partition panels, 4x4 inch (1 01.6x mm) in size illustrating panel finish, color, and sheen. E. Manufacturer's Installation Instructions: Indicate special procedures. PART 2 PRODUCTS 2.01 MANUFACTURERS A. Phenolic Toilet Compartments: 1. Bradley: Sentenial Overhead Braced - Series Acceptable Substitutions: An apporved equal as manufactured by: a. Global Partitions. b. Accurate Partitions Corp. c. Bobrick 2.02 PHENOLIC TOILET COMPARTMENTS A. Toilet Compartments: Factory fabricated doors, pilasters, and divider panels made of solid phenolic core panels with integral melamine finish, floor-mounted unbraced. 1. Color: Single color as selected. B. Doors: 1. Thickness: 3/4 inch (19 mm). 2. Width: 24 inch (61 0 mm). 3. Width for Handicapped Use: 36 inch (915 mm), out-swinging. 4. Height: 58 inch (1473 mm). C. Panels: 1. Thickness: 1/2 inch (13 mm). 2. Height: 58 inch (1473 mm). 3. Depth: As indicated on drawings. D. Pilasters: 1. Thickness: 3/4 inch (19 mm). 2. Width: As required to fit space; minimum 3 inches (76 mm). E. Screens: Without doors; to match compartments; mounted to wall with two panel brackets with vertical support/bracing same as compartments PLASTIC TOILET COMPARTMENTS

2 2.03 ACCESSORIES A. Pilaster Shoes: Formed ASTM A666, Type 304 stainless steel with No. 4 finish, 3 in (75 mm) high, concealing floor fastenings. 1. Provide adjustment for floor variations with screw jack through steel saddles integral with pilaster. B. Head Rails: Hollow anodized aluminum, 1 x 1-1/2 inch (25 x 38 mm) size, with anti-grip profile and cast socket wall brackets. C. Pilaster Brackets: Polished stainless steel. D. Wall Brackets: Continuous type, polished stainless steel. E. Attachments, Screws, and Bolts: Stainless steel, tamper proof type. 1. For attaching panels and pilasters to brackets: Through-bolts and nuts; tamper proof. F. Hardware: Polished stainless steel: 1. Pivot hinges, gravity type, adjustable for door close positioning; two per door. 2. Door Latch: Slide type with exterior emergency access feature. 3. Door strike and keeper with rubber bumper; mounted on pilaster in alignment with door latch. 4. Coat hook with rubber bumper; one per compartment, mounted on door. 5. Provide door pull for outswinging doors. PART 3 EXECUTION 3.01 EXAMINATION A. Verify that field measurements are as indicated. B. Verify correct spacing of and between plumbing fixtures. C. Verify correct location of built-in framing, anchorage, and bracing INSTALLATION A. Install partitions secure, rigid, plumb, and level in accordance with manufacturer's instructions. B. Maintain 3/8 to 1/2 inch (9 to 13 mm) space between wall and panels and between wall and end pilasters. C. Attach panel brackets securely to walls using anchor devices. D. Attach panels and pilasters to brackets. Locate head rail joints at pilaster center lines TOLERANCES A. Maximum Variation From True Position: 1/4 inch (6 mm). B. Maximum Variation From Plumb: 1/8 inch (3 mm) ADJUSTING A. Adjust and align hardware to uniform clearance at vertical edge of doors, not exceeding 3/16 inch (5 mm). B. Adjust hinges to position doors in partial opening position when unlatched. Return out-swinging doors to closed position. C. Adjust adjacent components for consistency of line or plane. END OF SECTION PLASTIC TOILET COMPARTMENTS

3 PART1 GENERAL 1.01 SECTION INCLUDES SECTION TOILET, BATH, AND LAUNDRY ACCESSORIES A. Accessories for toilet rooms and showers. B. Grab bars REFERENCE STANDARDS A. 36 CFR Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities; Final Rule; current edition; (ADA Standards for Accessible Design). B. ASTM A269- Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service; C. ASTM A666- Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar; D. ASTM C Standard Specification for Flat Glass; 2011 e1. E. ASTM C Standard Specification for Silvered Flat Glass Mirror; 2008 (Reapproved 2013) ADMINISTRATIVE REQUIREMENTS A. Coordinate the work with the placement of internal wall reinforcement, concealed ceiling supports, and reinforcement of toilet partitions to receive anchor attachments SUBMITTALS A. See Section Submittals, for submittal procedures. B. Product Data: Provide data on accessories describing size, finish, details of function, attachment methods. C. Samples: Submit two samples of each accessory, illustrating color and finish. D. Manufacturer's Installation Instructions: Indicate special procedures and conditions requiring special attention. PART 2 PRODUCTS 2.01 MANUFACTURERS A. Products listed are made by Bobrick. B. Other Acceptable Manufacturers: 1. A & J Washroom Accessories Inc: 2. American Specialties, Inc: 3. Bradley Corporation: 4. Substitutions: Approved equals. C. All items of each type to be made by the same manufacturer MATERIALS A. Accessories - General: Shop assembled, free of dents and scratches and packaged complete with anchors and fittings, steel anchor plates, adapters, and anchor components for installation. 1. Grind welded joints smooth. 2. Fabricate units made of metal sheet of seamless sheets, with flat surfaces. B. Stainless Steel Sheet: ASTM A666, Type 304. C. Stainless Steel Tubing: ASTM A269, Type 304 or 316. D. Mirror Glass: Float glass, ASTM C1 036 Type I, Class 1, Quality 02, with silvering, protective and physical characteristics complying with ASTM C1503. E. Adhesive: Two component epoxy type, waterproof TOILET, BATH, AND LAUNDRY ACCESSORIES

4 2.03 FINISHES A. Stainless Steel: No.4 satin brushed finish, unless otherwise noted TOILET ROOM ACCESSORIES A. Toilet Paper Dispenser (TA-01): Double roll, surface mounted with dispensing mechanism, stainless steelinner housing and cam, front of toilet tissue dispencer door shall be drawn, one-piece, seamless construction.. 1. Product: Similar to B4288 manufactured by Bobrick. B. Combination Towel Dispenser/Waste Receptacle (TA-02): Recessed flush with wall, stainless steel; seamless wall flanges, continuous piano hinges, tumbler locks on upper and lower doors. 1. Waste receptacle liner: Reusable, heavy-duty vinyl. 2. Towel dispenser capacity: 400 C-fold. 3. Waste receptacle capacity: 4 gallons (15 liters). C. Soap Dispenser (TA-03): Liquid soap dispenser, deck-mounted on vanity, with polyethylene container concealed below deck; piston and 4 inch (1 00 mm) spout of stainless steel with bright polished finish; chrome-plated deck escutcheon. 1. Minimum Capacity: 16 ounces (0.5 liter). D. Mirrors (TA-04): Stainless steel framed, 6 mm thick float glass mirror. 1. Size: As indicated on drawings.. 2. Frame: 0.05 inch (1.3 mm) angle shapes, with mitered and welded and ground corners, and tamperproof hanging system; No.4 finish. 3. Backing: Full-mirror sized, minimum 0.03 inch (0.8 mm) galvanized steel sheet and nonabsorptive filler material. E. Grab Bars (TA-05): Stainless steel, nonslip grasping surface finish. 1. Standard Duty Grab Bars: a. Push/Pull Point Load: 250 pound-force (1112 N), minimum. b. Dimensions: 1-1/4 inch (32 mm) outside diameter, minimum 0.05 inch (1.3 mm) wall thickness, exposed flange mounting, 1-1/2 inch (38 mm) clearance between wall and inside of grab bar. c. Length and Configuration: As indicated on drawings. F. Sanitary Napkin Disposal Unit (TA-06): Stainless steel, back-to-back partition mounting with adjustable flanges, self-closing door, locking bottom panel with full-length stainless steel piano-type hinge, removable receptacle SHOWER AND TUB ACCESSORIES A. Shower Curtain Rod (TA-07): Stainless steel tube, 1 inch (25 mm) outside diameter, 0.04 inch (1.0 mm) wall thickness, satin-finished, with 3 inch (75 mm) outside diameter, minimum 0.04 inch (1.0 mm) thick satin-finished stainless steel flanges, for installation with exposed fasteners. B. Shower Curtain (TA-08): 1. Material: Opaque vinyl, inch (0.2 mm) thick, matte finish, with antibacterial treatment, flameproof and stain-resistant. 2. Size: 36 by 72 inches (914 by 1830 mm), hemmed edges. 3. Grommets: Stainless steel; pierced through top hem on 6 inch (150 mm) centers. 4. Color: White. 5. Shower curtain hooks: Chrome-plated or stainless steel spring wire designed for snap closure. C. Wall-Mounted Soap Dish (TA-09): Heavy duty, seamless stainless steel, surface-mounted with drain holes, without grab bar, satin finish; with concealed mechanical fastening suitable for substrate and backplate. D. Towel Pin TA-10): Stainless steel, 3 inch (75 mm) extension from wall; rectangular-shaped bracket and backplate for concealed attachment, satin finish TOILET, BATH, AND LAUNDRY ACCESSORIES

5 PART 3 EXECUTION 3.01 EXAMINATION A. Verify existing conditions before starting work. B. Verify exact location of accessories for installation. C. Verify that field measurements are as indicated on drawings PREPARATION A. Deliver inserts and rough-in frames to site for timely installation. B. Provide templates and rough-in measurements as required INSTALLATION A. Install accessories in accordance with manufacturers' instructions in locations indicated on the drawings. B. Install plumb and level, securely and rigidly anchored to substrate. C. Mounting Heights: As required by accessibility regulations, unless otherwise indicated. 1. Grab Bars: As indicated on the drawings. 2. Mirrors: 40 inch (1 016 mm), measured to bottom of mirrored surface PROTECTION A. Protect installed accessories from damage due to subsequent construction operations. END OF SECTION TOILET, BATH, AND LAUNDRY ACCESSORIES

6 THIS PAGE INTENTIONALLY LEFT BLANK

Hamilton International Air Cargo Logistics Facility Section November 2014 Page 1 of 4

Hamilton International Air Cargo Logistics Facility Section November 2014 Page 1 of 4 Hamilton International Air Cargo Logistics Facility Section 10 21 14 METAL TOILET COMPARTMENTS Page 1 of 4 Part 1 General 1.1 SECTION INCLUDES.1 Metal toilet compartments, floor mounted. 1.2 RELATED SECTIONS.1

More information

Construction Standards PAGE

Construction Standards PAGE Construction Standards PAGE 102810-1 SECTION 102810 - PART 1 - GENERAL 1.1 M.S.U. ISSUES A. Mirrors will normally be provided at all lavatory locations. Provide full-length mirror on adjacent wall for

More information

Missouri S&T Bullman Showers Date: February 13, 2017 Project No SECTION PLASTIC SHOWER AND DRESSING COMPARTMENTS

Missouri S&T Bullman Showers Date: February 13, 2017 Project No SECTION PLASTIC SHOWER AND DRESSING COMPARTMENTS SECTION 102116.19 - PLASTIC SHOWER AND DRESSING COMPARTMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and

More information

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017 SECTION 10 2113.19 - PLASTIC TOILET COMPARTMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01

More information

SECTION TOILET PARTITIONS. A. Section Structural Steel: Supports for ceiling hung compartments.

SECTION TOILET PARTITIONS. A. Section Structural Steel: Supports for ceiling hung compartments. SECTION 10155 TOILET PARTITIONS PART 1 GENERAL 1.1 SECTION INCLUDES A. Stainless steel toilet compartments. 1.2 RELATED SECTIONS A. Section 05120 - Structural Steel: Supports for ceiling hung compartments.

More information

SECTION SOLID PHENOLIC PLASTIC TOILET PARTITIONS

SECTION SOLID PHENOLIC PLASTIC TOILET PARTITIONS PRODUCT SPECIFICATION SERIES 1080/1180 PART 1 - GENERAL 1.01 Work Included SECTION 10170 SOLID PHENOLIC PLASTIC TOILET PARTITIONS A. Toilet Compartments B. Urinal Screens C. Shower Dividers D. Dressing

More information

SECTION TOILET AND BATH ACCESSORIES ADDENDUM NO.4

SECTION TOILET AND BATH ACCESSORIES ADDENDUM NO.4 SECTION 10 28 13 - ADDENDUM NO.4 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

SECTION TRESPA ATHLON SOLID COMPOSITE PHENOLIC TOILET PARTITIONS. A. Solid composite phenolic toilet compartments and urinal screens.

SECTION TRESPA ATHLON SOLID COMPOSITE PHENOLIC TOILET PARTITIONS. A. Solid composite phenolic toilet compartments and urinal screens. SECTION 102113 TRESPA ATHLON SOLID COMPOSITE PHENOLIC TOILET PARTITIONS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Solid composite phenolic toilet compartments and urinal screens. 1.02 RELATED SECTIONS

More information

10155 Toilet Compartments

10155 Toilet Compartments 10155 Toilet Compartments This document provides design standards only, and is not intended for use, in whole or in part, as a specification. Do not copy this information verbatim in specifications or

More information

AD 0 O~ Partitions, Inc East La Palma Avenue - Anaheim, California Ph: and Fax:

AD 0 O~ Partitions, Inc East La Palma Avenue - Anaheim, California Ph: and Fax: AD 0 O~ Partitions, Inc. 3501 East La Palma Avenue - Anaheim, California 92806 Ph: 714-666-0108 and 714-666-0109 Fax:714-666-0110 www.weisrobart.com HOPE SOLID POLYMER-PLASTIC COMPARTMENTS PART 1 - GENERAL

More information

PLASTIC LAMINATED COMPARTMENTS SECTION TOILET PARTITIONS

PLASTIC LAMINATED COMPARTMENTS SECTION TOILET PARTITIONS PHONE (734) 467-8711 Phone: 714.666.0108 / 714.666.0109 FAX (734) 467-8710 www.weisrobart.com Fax: 714.666.0110 3501 E. La Palma Ave., Anaheim, CA 92806 3737 S. VENOY RD. P.O. BOX 130 www.weisrobart.com

More information

SECTION TOILET COMPARTMENTS. A. Section Metal Fabrications: Concealed steel support members.

SECTION TOILET COMPARTMENTS. A. Section Metal Fabrications: Concealed steel support members. SECTION 10155 TOILET COMPARTMENTS PART 1 GENERAL 1.1 SECTION INCLUDES A. Plastic laminate partitions. 1.2 RELATED SECTIONS A. Section 05500 - Metal Fabrications: Concealed steel support members. B. Section

More information

H D P SOLID PHENOLIC FLOOR BRACED COMPARTMENTS SECTION FB TOILET PARTITIONS

H D P SOLID PHENOLIC FLOOR BRACED COMPARTMENTS SECTION FB TOILET PARTITIONS 3501 East La Palma Avenue - Anaheim, California 92806 PART 1 GENERAL Ph: 714-666-0108 and 714-666-0109 Fax: 714-666-0110 www.weisrobart.com H D P SOLID PHENOLIC FLOOR BRACED COMPARTMENTS 1.1 RELATED DOCUMENTS:

More information

B. LEED Submittals (Projects authorized for LEED certification only)

B. LEED Submittals (Projects authorized for LEED certification only) SECTION 10 21 16 - SHOWER AND DRESSING COMPARTMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

H D P SOLID PHENOLIC CEILING HUNG COMPARTMENTS SECTION CH TOILET PARTITIONS

H D P SOLID PHENOLIC CEILING HUNG COMPARTMENTS SECTION CH TOILET PARTITIONS 3501 East La Palma Avenue - Anaheim, California 92806 Ph: 714-666-0108 and 714-666-0109 Fax: 714-666-0110 www.weisrobart.com PART 1 GENERAL 1.1 RELATED DOCUMENTS: H D P SOLID PHENOLIC CEILING HUNG COMPARTMENTS

More information

PRODUCT SPECIFICATIONS - SERIES 1090

PRODUCT SPECIFICATIONS - SERIES 1090 PRODUCT SPECIFICATIONS - SERIES 1090 SECTION 10170 SOLID COLOR REINFORCED COMPOSITE TOILET PARTITIONS PART 1 GENERAL 1.01 Work Included A. Toilet Compartments B. Urinal Screens C. Shower Dividers D. Dressing

More information

A This Section includes stock, manufactured toilet compartments.

A This Section includes stock, manufactured toilet compartments. SECTION 102113 -TOILET COMPARTMENTS PART 1 -GENERAL 1.1 SUMMARY A This Section includes stock, manufactured toilet compartments. B. Types of toilet compartments include: 1. Solid plastic, homogenous color.

More information

PLASTIC LAMINATED FLOOR TO CEILING COMPARTMENTS SECTION FC TOILET PARTITIONS

PLASTIC LAMINATED FLOOR TO CEILING COMPARTMENTS SECTION FC TOILET PARTITIONS Phone: 714.666.0108 PHONE /(734) 714.666.0109 467-8711 FAX Fax: (734) 714.666.0110 467-8710 www.weisrobart.com 3501 E. La Palma Ave., Anaheim, CA 92806 3737 S. VENOY RD. P.O. BOX 130 www.weisrobart.com

More information

HDPE SOLID POLYMER-PLASTIC FLOOR TO CEILING COMPARTMENTS SECTION FC WEIS/POLY TOILET PARTITIONS

HDPE SOLID POLYMER-PLASTIC FLOOR TO CEILING COMPARTMENTS SECTION FC WEIS/POLY TOILET PARTITIONS 3501 East La Palma Avenue - Anaheim, California 92806 Ph: 714-666-0108 and 714-666-0109 Fax: 714-666-0110 www.weisrobart.com HDPE SOLID POLYMER-PLASTIC FLOOR TO CEILING COMPARTMENTS PART 1 GENERAL SECTION

More information

SECTION SOLID PLASTIC TOILET PARTITIONS. A. Section Includes: Toilet partitions and urinal screens, complete with hardware.

SECTION SOLID PLASTIC TOILET PARTITIONS. A. Section Includes: Toilet partitions and urinal screens, complete with hardware. SECTION 10170 SOLID PLASTIC TOILET PARTITIONS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Toilet partitions and urinal screens, complete with hardware. 1.02 REFERENCES A. American Society for Testing

More information

HDPE SOLID POLYMER-PLASTIC FLOOR BRACED COMPARTMENTS SECTION FB WEIS/POLY TOILET PARTITIONS

HDPE SOLID POLYMER-PLASTIC FLOOR BRACED COMPARTMENTS SECTION FB WEIS/POLY TOILET PARTITIONS 3501 East La Palma Avenue - Anaheim, California 92806 Ph: 714-666-0108 and 714-666-0109 Fax: 714-666-0110 www.weisrobart.com PART 1 GENERAL HDPE SOLID POLYMER-PLASTIC FLOOR BRACED COMPARTMENTS SECTION

More information

.1 Underwriters' Laboratories of Canada (ULC)..1 CAN/ULC-S102-M88(R2000), Surface Burning Characteristics of Building Materials and Assemblies.

.1 Underwriters' Laboratories of Canada (ULC)..1 CAN/ULC-S102-M88(R2000), Surface Burning Characteristics of Building Materials and Assemblies. Place D Orléans Transitway Section 10 11 35 1231 Place D Orléans Dr, Ottawa, ON. SLIDING DISPLAY BACKDROPS City of Ottawa Project No. CR008042 Page 1 of 2 1 GENERAL 1.01 REFERENCES.1 Underwriters' Laboratories

More information

SOLID PLASTIC TOILET PARTITIONS. A. Section Includes: Toilet partitions and urinal screens, complete with hardware.

SOLID PLASTIC TOILET PARTITIONS. A. Section Includes: Toilet partitions and urinal screens, complete with hardware. SECTION 10170 SOLID PLASTIC TOILET PARTITIONS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Toilet partitions and urinal screens, complete with hardware. 1.02 REFERENCES A. American Society for Testing

More information

SECTION SOLID COLOR REINFORCED COMPOSITE TOILET PARTITIONS

SECTION SOLID COLOR REINFORCED COMPOSITE TOILET PARTITIONS PRODUCT SPECIFICATIONS - SERIES 1090 SECTION 10170 SOLID COLOR REINFORCED COMPOSITE TOILET PARTITIONS PART 1 GENERAL 1.01 Work Included A. Toilet Compartments B. Urinal Screens C. Shower Dividers D. Dressing

More information

e. Cutouts and Holes for Toilet Accessories: Made to template and edge-reinforced.

e. Cutouts and Holes for Toilet Accessories: Made to template and edge-reinforced. TOILET COMPARTMENTS GENERAL INFORMATION 1.1 Unless otherwise directed by CU Facilities toilet compartments shall be floor-supported, and urinal screens shall be wall hung, with anchoring devices and accessories

More information

SECTION METAL BUILDING SYSTEMS

SECTION METAL BUILDING SYSTEMS D. Stainless Steel Tubing: ASTM A269, Type 304 or 316. E. Galvanized Sheet Steel: Hot-dipped galvanized steel sheet, ASTM A653/A653M, with G60/Z180 coating. F. Mirror Glass: Float glass, ASTM C1036 Type

More information

SECTION TOILET COMPARTMENTS SPEC WRITER NOTES:

SECTION TOILET COMPARTMENTS SPEC WRITER NOTES: PART 1 - GENERAL 1.1 DESCRIPTION SECTION 10 21 13 TOILET COMPARTMENTS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable in

More information

SECTION PREFABRICATED SHOWER COMPARTMENTS

SECTION PREFABRICATED SHOWER COMPARTMENTS SECTION 102118 PREFABRICATED SHOWER COMPARTMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary General Conditions and Division

More information

Project No: Pakenham Branch Library, Pakenham, Ontario Section

Project No: Pakenham Branch Library, Pakenham, Ontario Section DECEMBER, 2016 Page 1 of 5 1 GENERAL 1.01 RELATED SECTIONS.1 Section 01 33 00 - Submittal Procedures..2 Section 01 78 00 - Closeout Submittals. 1.02 REFERENCES.1 American Society for Testing and Materials

More information

.2 Section Waste Management and Disposal. 1.2 REFERENCES.1 Codes and standards referenced in this section refers to the latest edition thereof.

.2 Section Waste Management and Disposal. 1.2 REFERENCES.1 Codes and standards referenced in this section refers to the latest edition thereof. Issued 2005/06/01 Section 10800 Toilet, Bath and Laundry Accessories Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures.2 Section 01355 Waste Management and Disposal.3

More information

DTW Works Master Specification Version 2006 Issued 2006/08/01 Section Toilet, Bath and Laundry Accessories Page 1 of 6

DTW Works Master Specification Version 2006 Issued 2006/08/01 Section Toilet, Bath and Laundry Accessories Page 1 of 6 Issued 2006/08/01 Section 10800 Toilet, Bath and Laundry Accessories Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures.2 Section 01355 Waste Management and Disposal.3

More information

SECTION TOILET ACCESSORIES

SECTION TOILET ACCESSORIES SECTION 10800 TOILET ACCESSORIES PART 1 GENERAL 1.01 SECTION INCLUDES A. Accessories for toilet rooms, showers and janitor closets. B. Grab bars. C. Concealed anchor plates, fasteners. D. ADA piping protection

More information

A. Building identification signs and apartment unit identification signs SUBMITTALS

A. Building identification signs and apartment unit identification signs SUBMITTALS sectton 101400 SIGNAGE PART 1 GENERAL 1.01 SECTION INCLUDES A. Building identification signs and apartment unit identification signs. 1.02 SUBMITTALS A. See Section 013000 - Administrative Requirements,

More information

SECTION METAL ATHLETIC LOCKERS

SECTION METAL ATHLETIC LOCKERS SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified

More information

SECTION TOILET COMPARTMENTS

SECTION TOILET COMPARTMENTS PART 1 - GENERAL 1.1 DESCRIPTION SECTION 10 21 13 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable

More information

B. Surface, partition and recessed mounted toilet and bath accessories indicated on the Drawings and Schedules.

B. Surface, partition and recessed mounted toilet and bath accessories indicated on the Drawings and Schedules. SECTION 10 28 00 - TOILET ROOM ACCESSORIES PART 1: GENERAL 1.1 SUMMARY A. This section includes toilet and bath accessories in accordance with the Contract Documents. The work of this Section shall include

More information

SECTION MEDICATION CABINET. 1.1 SUMMARY A. Section Includes: 1. Medication cabinets with self-contained refrigerator and fixtures.

SECTION MEDICATION CABINET. 1.1 SUMMARY A. Section Includes: 1. Medication cabinets with self-contained refrigerator and fixtures. SECTION 12 35 70.21 MEDICATION CABINET SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Medication

More information

SECTION LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM

SECTION LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM Page 1 of 6 SECTION 08 32 20 LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS SLIDING DOORS. SECTION INCLUDES OVERHEAD SLIDING TUBE ASSEMBLY, MOUNTING

More information

All proposals will be evaluated by a district committee. The following criteria/weighting will be used to evaluate each proposal:

All proposals will be evaluated by a district committee. The following criteria/weighting will be used to evaluate each proposal: The School District of Newberry County Request for Proposals Newberry High School Countertop/Toilet Partitions Replacement The School District of Newberry County is accepting proposals for Boys and Girls

More information

SECTION METAL ATHLETIC LOCKERS

SECTION METAL ATHLETIC LOCKERS SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified

More information

SECTION ALUMINUM HANDRAIL SYSTEMS

SECTION ALUMINUM HANDRAIL SYSTEMS SECTION 05520 ALUMINUM HANDRAIL SYSTEMS PART 1 - GENERAL 1.01 SUMMARY A. Section includes aluminum handrails and railings. B. Related Work: 1. Section 03300 - Cast-in-Place Concrete C. References: 1. American

More information

Richmond Hill Primary Renovation SECTION COMPARTMENTS AND CUBICLES

Richmond Hill Primary Renovation SECTION COMPARTMENTS AND CUBICLES SECTION 10 1500 COMPARTMENTS AND CUBICLES PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification

More information

Bradley Bradmar Plastic Toilet Partitions

Bradley Bradmar Plastic Toilet Partitions Bradley Bradmar Plastic Toilet Partitions Bradley Bradmar Plastic Partitions provide an economical, durable, and colorful solution for toilet rooms. Bradley's radiused panel edge design locks moisture

More information

A. Access doors and frames are part of an access door and frame allowance.

A. Access doors and frames are part of an access door and frame allowance. SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION ACCESS DOORS AND FRAMES

SECTION ACCESS DOORS AND FRAMES SECTION 08310 ACCESS DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. [Fire rated] [and] [Non-fire rated] wall access panels. 2. [Fire rated] [and] [Non-fire rated] ceiling access

More information

Grimes Elementary School Renovation September 7, 2010 Houston Independent School District SECTION 102800 - TOILET, BATH, AND LAUNDRY ACCESSORIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general

More information

ROWAN/KANNAPOLIS - ABC STORE & WAREHOUSE DECEMBER 2016 Salisbury, NC

ROWAN/KANNAPOLIS - ABC STORE & WAREHOUSE DECEMBER 2016 Salisbury, NC SECTION 10000 - MISCELLANEOUS ACCESSORIES PART 1 - GENERAL RELATED DOCUMENTS: Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification sections,

More information

DIVISION 10 SPECIALTIES I I. Libbie Young Centre, Lloydminster, AB th Avenue, Regina, SK 23 March David W. Edwards Architect Ltd

DIVISION 10 SPECIALTIES I I. Libbie Young Centre, Lloydminster, AB th Avenue, Regina, SK 23 March David W. Edwards Architect Ltd DVSON 10 SPECALTES 200 1102 8 th Avenue, Regina, SK 23 March 2011 DVSON 10 SPECALTES SECTON 1001 00 MSCELLANEOUS SPECALTES PAGE 1 1. GENERAL 1.1 Related Work.1 Wood Blocking Section 06 10 00 1.2 Shop Drawings.1

More information

Bradley Mills Stainless Steel Toilet Partitions

Bradley Mills Stainless Steel Toilet Partitions Bradley Mills Stainless Steel Toilet Partitions Bradley Mills Stainless Steel Partitions provide a low maintenance, and durable solution for toilet rooms. Bradley's Permaseal panel edge design locks moisture

More information

SECTION ACCORDION FOLDING PARTITIONS

SECTION ACCORDION FOLDING PARTITIONS PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 10 22 26.13 ACCORDION FOLDING PARTITIONS SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable

More information

OREGON STATE UNIVERSITY GOSS STADIUM - CLUB AND LOGE SEATING CORVALIS, OREGON SECTION WALL AND DOOR PROTECTION

OREGON STATE UNIVERSITY GOSS STADIUM - CLUB AND LOGE SEATING CORVALIS, OREGON SECTION WALL AND DOOR PROTECTION SECTION 10 2600 - WALL AND DOOR PROTECTION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Specification Floor-To-Ceiling Solid Plastic Toilet Compartments

Specification Floor-To-Ceiling Solid Plastic Toilet Compartments Specification Floor-To-Ceiling Solid Plastic Toilet Compartments PART 1 GENERAL 1.01 SUBMITTALS A. Plastic compartment work includes the following, where indicated: 1. Floor-to-ceiling compartments. B.

More information

A2.0 TRIPLE M DEVELOPMENT EXTERIOR ELEVATIONS. Rochester, MN Hwy 52 North. Apr 07, phone fax

A2.0 TRIPLE M DEVELOPMENT EXTERIOR ELEVATIONS. Rochester, MN Hwy 52 North. Apr 07, phone fax NORTH ELEVATION 1 1/8" = 1'-0" WEST ELEVATION 2 1/8" = 1'-0" SOUTH ELEVATION 3 1/8" = 1'-0" EXTERIOR ELEVATIONS A2.0 EAST ELEVATION 4 1/8" = 1'-0" EXTERIOR FRAME TYPES 1 1/4" = 1'-0" 2 INTERIOR FRAME TYPES

More information

SECTION METAL STUDENT LOCKERS

SECTION METAL STUDENT LOCKERS SECTION 10 51 13 - METAL STUDENT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES 1. DESCRIPTION: Furnish and install Heavy-Duty Ventilated (HDV) ELITE Metal Lockers, complete, as shown and specified per contract

More information

Privacy Plus Partitions

Privacy Plus Partitions Privacy Plus Partitions WITH DuPont Corian solid surface SECTION 10172 PRIVACY PLUS PARTITIONS WITH DUPONT CORIAN SPECIFIER: THROUGHOUT THIS SPECIFICATION EDIT NOTE IS ISSUED TO IDENTIFY ITEMS WHICH SHOULD

More information

Bradley Mills Plastic Laminate Toilet Partitions

Bradley Mills Plastic Laminate Toilet Partitions Bradley Mills Plastic Laminate Toilet Partitions Bradley Mills Plastic Laminate Partitions provide an economical, durable, and colorful solution for toilet rooms. Bradley's high pressure laminate veneers

More information

SECTION METAL LOCKERS

SECTION METAL LOCKERS PART 1 GENERAL 1.1 DESCRIPTION SECTION 10 51 13 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other items or paragraphs not applicable

More information

SECTION SIGNAGE

SECTION SIGNAGE SECTION 10 14 00 SIGNAGE PART1 GENERAL 1.1 SECTION INCLUDES 1.2 RELATED REQUIREMENTS Related Documents: Drawings and general provisions of the Contract including TPWD Uniform General Conditions and Section

More information

PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017

PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017 SECTION 10505 - METAL STUDENT LOCKERS PART 1 - GENERAL 1.01 SCOPE OF WORK A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

B. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work.

B. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work. SECTION 10 5113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,

More information

WEC Manufacturing Phone: (901) Website: Itswec.com

WEC Manufacturing Phone: (901) Website: Itswec.com All Welded Plus Series Part 1: General 1.1 Construction Requirements: All lockers shall be powder coated steel as design and manufactured by WEC, Memphis, Tennessee. WEC will furnish all labor and materials

More information

A. All tackboards shall be mechanically fastened to walls; gluing shall not be allowed.

A. All tackboards shall be mechanically fastened to walls; gluing shall not be allowed. 10 1101 VISUAL DISPLAY BOARDS A. All white boards, chalkboards, glass boards, and smart boards shall be mechanically fastened to walls; gluing shall not be allowed. Paint-on and vinyl display boards are

More information

SECTION (10800) - TOILET, BATH, AND LAUNDRY ACCESSORIES

SECTION (10800) - TOILET, BATH, AND LAUNDRY ACCESSORIES SECTION 10 28 00 (10800) - TOILET, BATH, AND LAUNDRY ACCESSORIES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Toilet Accessories 2. Bath Accessories 3. Attachment hardware B. Related Sections: 1.02

More information

SECTION ACCESS DOORS AND FRAMES

SECTION ACCESS DOORS AND FRAMES 11303, 26 th avenue Montreal, Quebec Canada H1E 6N6 Phone: (800) 479-1489 Fax: (800) 297-1489 PRODUCT GUIDE SPECIFICATION SECTION 08 31 00 S PART 1 - GENERAL 1.1 SUMMARY A. Provide access doors, frames

More information

1. Standard two tier metal lockers and metal base.

1. Standard two tier metal lockers and metal base. SECTION 105113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

SECTION HANDRAILS AND RAILINGS. A. Section Cast-In-Place Concrete; coordination with substrate.

SECTION HANDRAILS AND RAILINGS. A. Section Cast-In-Place Concrete; coordination with substrate. SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Welded stainless steel railing systems. 1.2 RELATED SECTIONS A. Section 03300 - Cast-In-Place Concrete; coordination with substrate.

More information

SECTION SECURITY GRILLES 679 SERIES SUPERGARD SIDE FOLDING GRILLE

SECTION SECURITY GRILLES 679 SERIES SUPERGARD SIDE FOLDING GRILLE SECTION 08 33 00 SECURITY GRILLES 679 SERIES SUPERGARD SIDE FOLDING GRILLE Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on

More information

Sanymetal Partitions

Sanymetal Partitions Sanymetal Partitions Sanymetal Partitions Sanymetal has two major manufacturing facilities to meet the bathroom partition needs of its customers, throughout the U.S. In addition to its 50,000 square foot

More information

DIVISION 10 SPECIALTIES SECTION METAL LOCKERS

DIVISION 10 SPECIALTIES SECTION METAL LOCKERS DIVISION 10 SPECIALTIES SECTION 10 51 13 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION DETENTION WINDOW SCREENS. 1. Detention screens for interior and exterior installations at exterior windows in existing buildings.

SECTION DETENTION WINDOW SCREENS. 1. Detention screens for interior and exterior installations at exterior windows in existing buildings. SECTION 08 56 66 DETENTION WINDOW SCREENS SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: SPEC

More information

SECTION METAL STAIRS

SECTION METAL STAIRS SECTION 05 51 00 METAL STAIRS PART 1 GENERAL 1.1 SUMMARY A. Section includes steel stair frame of structural sections, with closed risers; pan to receive concrete fill stair treads and landings; integral

More information

SECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection

SECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION

More information

SECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 08332 [08 33 13] COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Metal Counter

More information

SECTION ORNAMENTAL ALUMINUM RAILING

SECTION ORNAMENTAL ALUMINUM RAILING SECTION 05730 ORNAMENTAL ALUMINUM RAILING PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Pipe Railing 1.2 RELATED SECTIONS A. Section 03300 Cast-In-Place Concrete: Placement of sleeves cast in concrete.

More information

SECTION ALL GLASS ENTRANCES. 1. Lock cylinders for tempered glass entrance doors are specified in Division 8 section Finished Hardware.

SECTION ALL GLASS ENTRANCES. 1. Lock cylinders for tempered glass entrance doors are specified in Division 8 section Finished Hardware. 1 SECTION 08 4210 ALL GLASS ENTRANCES PART 1 - GENERAL 1.01 SUMMARY A. This section includes: 1. Vestibule doors matching entrance doors. 2. Sidelites. B. Related work in other sections: 1. Lock cylinders

More information

COMMERCIAL ITEM DESCRIPTION PARTITIONS, TOILET, COMPLETE

COMMERCIAL ITEM DESCRIPTION PARTITIONS, TOILET, COMPLETE [INCH-POUND] August 22, 1997 SUPERSEDING RR-P-1352C February 8, 1989 COMMERCIAL ITEM DESCRIPTION PARTITIONS, TOILET, COMPLETE The General Services Administration has authorized the use of this commercial

More information

SECTION MANUAL FOUR FOLD DOORS MODEL 38 DECORATIVE PANEL DESIGN

SECTION MANUAL FOUR FOLD DOORS MODEL 38 DECORATIVE PANEL DESIGN SECTION 08350 MANUAL FOUR FOLD DOORS MODEL 38 DECORATIVE PANEL DESIGN PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions

More information

SECTION HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS

SECTION HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS Page 1 of 6 SECTION 08 32 20 HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED BI-FOLD GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,

More information

Architectural Specifications, Section Phenolic Lockers

Architectural Specifications, Section Phenolic Lockers Architectural Specifications, Section 10500 Phenolic Lockers Hollman, Inc., 1825 W. Walnut Hill Lane, Irving, TX 75038, (972) 815-4000, www.hollman.com 1.0 GENERAL 1.1 SECTION INCLUDES A. Phenolic Lockers.

More information

UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:

UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number: SECTION 105113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 SUBMITTALS A. Product Data: For each type of

More information

SECTION STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS

SECTION STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS SECTION 08110 - STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General, Supplementary, and Special Conditions and Division 1 Specification

More information

SECTION LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS

SECTION LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS Page 1 of 9 SECTION 10 2238.13 LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED FOLDING GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,

More information

SECTION EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS

SECTION EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 SECTION 08 32 20 EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,

More information

B. Provide fire-rated access doors where indicated or scheduled.

B. Provide fire-rated access doors where indicated or scheduled. SECTION 08305 ACCESS DOORS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification Sections,

More information

Nortrax Section David Manchester Road, Ottawa NON-STRUCTURAL METAL FRAMING 16 May 2014 Page 1

Nortrax Section David Manchester Road, Ottawa NON-STRUCTURAL METAL FRAMING 16 May 2014 Page 1 16 May 2014 Page 1 PART 1 GENERAL 1.1 DESCRIPTION This section specifies steel studs wall systems, shaft wall systems, ceiling or soffit suspended or furred framing, wall furring, fasteners, and accessories

More information

SECTION METAL EQUIPMENT LOCKERS

SECTION METAL EQUIPMENT LOCKERS SECTION 10 51 13 - METAL EQUIPMENT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified

More information

SECTION CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS

SECTION CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 SECTION 08 32 20 CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS [OR WOOD] PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,

More information

SECTION IMPACT RESISTANT WALL PROTECTION

SECTION IMPACT RESISTANT WALL PROTECTION SECTION 10265 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Impact-Resistant Wall Protection including Wall guards,

More information

Trex Commercial Products page Metal Railing

Trex Commercial Products page Metal Railing SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Classic Railings (Picket). B. GridGuard Railings (Mesh). C. Post Rail (Glass). D. Tensiline Railings (Cable). E. Track Rail (Glass).

More information

SECTION PHENOLIC LOCKERS AND BENCHES. B. Section Gypsum Board Area Separation Wall Assemblies.

SECTION PHENOLIC LOCKERS AND BENCHES. B. Section Gypsum Board Area Separation Wall Assemblies. SECTION 10 51 29 PHENOLIC LOCKERS AND BENCHES PART 1 GENERAL 1.1 SECTION INCLUDES A. Phenolic lockers, hardware and accessories. B. Phenolic pedestal benches. C. Phenolic cubbies. 1.2 RELATED SECTIONS

More information

B. Polyethylene samples shall be submitted for Owner approval of color and quality.

B. Polyethylene samples shall be submitted for Owner approval of color and quality. Glass Rail ENGINEERED DASHERBOARD SPECIFICATIONS PART 1 - GENERAL 1.01 PROJECT SCOPE A. Contractor shall furnish and install one complete set of steel framed dasherboards as indicated on the drawings and

More information

MODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS

MODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS MODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS Ideal for applications requiring space division, visibility and security Used in bank lobbies, offices, conference areas, interior storefronts and arena skyboxes

More information

SECTION PLASTIC LOCKERS. A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines.

SECTION PLASTIC LOCKERS. A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines. SECTION 10 51 26 PLASTIC LOCKERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Fully Assembled High Density Polyethylene Lockers B. High Density Polyethylene Benches 1.02 REFERENCES A. ADAAG - Americans with

More information

SECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS

SECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,

More information

SECTION HANDRAILS AND RAILINGS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION HANDRAILS AND RAILINGS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES Display hidden notes to specifier. (Don't know how? Click Here) A. Classic Railings (Picket). B. GridGuard Railings (Mesh). C. Post

More information

SECTION FOLDING DOORS AMSTEL AS900CC DIVIDER SOUND

SECTION FOLDING DOORS AMSTEL AS900CC DIVIDER SOUND SECTION 08352 FOLDING DOORS AMSTEL AS900CC DIVIDER SOUND THREE PART SHORT FORM SPECIFICATIONS (CSI) PART 1 GENERAL 1.1 SUMMARY A. Section Includes: manually operated, side folding accordion- type products

More information

SECTION TOILET PARTITIONS

SECTION TOILET PARTITIONS SPECIALTIES BATON ROUGE, LOUISIANA SECTION 10 21 00 SECTION 10 21 00 TOILET PARTITIONS PART-1 GENERAL PART-2 PRODUCTS 1.1 DESCRIPTION A. Particle board core compartment work includes the following: 1.

More information

SECTION STEEL HEALTHCARE CASEWORK

SECTION STEEL HEALTHCARE CASEWORK SECTION 12 35 70.01 STEEL HEALTHCARE CASEWORK This guide specification has been prepared by InnerSpace Corporation to assist design professionals in the preparation of a specification section covering

More information

Section A2 Table of Contents ALL GLASS ENTRANCES

Section A2 Table of Contents ALL GLASS ENTRANCES Architectural Aluminum Entrances Storefronts Curtain Walls Impact-Resistant Systems Section A Table of Contents ALL GLASS ENTRANCES Specifications...S-S Swing Type A... - Swing Type F... - Swing Type P...

More information

University Apartments on Brooklyn PROJECT MANUAL

University Apartments on Brooklyn PROJECT MANUAL Section 122100 Horizontal Louver Blinds University Apartments on Brooklyn PART 1 - GENERAL 1.1 SECTION INCLUDES A. Horizontal slat louver blinds. B. Operating hardware. 1.2 RELATED SECTIONS A. Section

More information