Date of Authorization November 25, 2004 BMEC Authorization # BMEC Application # A AUTHORIZATION REPORT- Pavilion Membranes
|
|
|
- Phyllis Dalton
- 5 years ago
- Views:
Transcription
1 Building Materials Evaluation Commission 777 Bay Street, 2 nd Floor Toronto, Ontario, M5G2E5 Tel: 416: / Fax: Date of Authorization November 25, 2004 BMEC Authorization # BMEC Application # A AUTHORIZATION REPORT- Pavilion Membranes 1. Applicant 2. Manufacturing Facilities Del-Scott-Co. / Pavilion Fabrication & Sales Intertape Polymer Group Suite 305, 3-11 Bellerose Drive 50 Abbey Avenue St. Albert, Alberta P.O. Box 868 T8N 5C9 Truro, Nova Scotia B2N 5G6 Tel: (780) Fax: (780) Fabrene Inc Dupont Road P.O. Box 4040 North Bay, Ontario P1B 9B4 3. Description The Pavilion Building System is a non pressurized building, wherein the structure is composed of a steel framework to support the Pavilion Membranes, which are tensioned to provide a weather barrier. The steel frame structure of the Pavilion Building System shall be designed and constructed in accordance with the Building Code. The steel framework is a series of inline clear span frames, with end walls. The frame pieces are modular and are used in different arrangements to make a variety of profiles, such as the Low Profile Texan, the Chalet and the Everest. The Pavilion Membrane is on of two flame resistant woven polyolefin materials, Spiderweave FRU88X-6 (4 mil), or Spiderweave, P708. The Pavilion Membranes pieces are custom-sized and the edges reinforced for each building as per Pavilion specifications. The Pavilion Membranes meet the requirements of a Class A material under ASTM E 84 Surface Burning Characteristics and satisfies the flammability requirements set out in CAN/ULC-S109 and NFPA Del-Scott-Co./ Pavilion Fabrication & Sales Page 1 of 6
2 4. Authorization requested The Applicant sought a Building Materials Evaluation Commission (BMEC) Authorization for the Pavilion Membranes for use as a roof covering, only when used in conjunction with a Pavilion Building System, as defined in this Authorization, in lieu of the requirements of Sentence (1). Roof Covering Classification of the Building Code. 5. Assessment Reports and assessments provided by the Applicant show that if the Pavilion Membranes are designed, performance tested and installed in accordance with the limitations in the manufacturer's instructions, and the specific terms and conditions stated in this Authorization, the level of performance required by the Building Code will be provided. The reports submitted and reviewed, but were not limited to: 1. Office of State Fire Marshall, California Department of Forestry and Fire Protection Registration. 2. Bodycote Materials Testing Ortech Laboratory NFPA Large Scale Flame Resistance of FRU88X-6 Fabric, dated June 20, Bodycote Materials Testing Ortech Laboratory NFPA Test 1 and Test 2 Flame Resistance of FRU88X-6 Fabric, dated September 6, Bodycote Materials Testing Ortech Laboratory CAN/ULC-S109 Flame Resistance of FRU88X-6 Fabric, dated June 20, Bodycote Materials Testing Ortech Laboratory ASTM E 84 Surface Burning Characteristics of FRU88X-6 Fabric, dated June 27, Underwriters Laboratories of Canada Report on Surface Burning Characteristics of Plastic Materials, dated March 29, Draft Final Report Static Coefficient of Friction Tests, Nova Shield Fabrics, project number , dated March 22, Atlas Material Testing Solutions Hemispherical Spectral Reflection and near Normal/Hemispherical Spectral Transmittance Test Report, Report No , dated April 11, Bulletin, Building Approvals Department, Permits Section, City of Richmond, BC, Temporary Tents Permits-28, revised Del-Scott-Co./ Pavilion Fabrication & Sales Page 2 of 6
3 10. Pavilion Case Study prepared for the Building Material Evaluation Commission, dated June Nova-Shield Specification Sheet FRU88X-6 (4 mil). 12. Pavilion s Installation Manuals, by Del-Scott-Co Inc. 13. Pavilion s W arranty. 14. Quality Assurance Manual, Issue Number 3, dated October 20, Pavilion s Manufacturer s Information. 16. Nova-Shield Manufacturer s Information. 17. Excerpts from the Uniform Building Code 1985 ed. 18. Excerpts from the International Building Code Pavilion Report Supplementary Information September 17, Pavilion Report Supplementary Information June 30, Pavilion Report Supplementary Information June 24, Fabrene Industrial Fabric, type P708, dated September 14, Bodycote Testing Materials Canada ASTM E 84 Surface Burning Characteristics of FRU88X-6 Fabric, dated August 24, Fabrene Inc. Materials Testing Lab ASTM 1682, Tensile - Grab Test, dated November 11, Authorization The Pavilion Membranes are authorized for use as a roof covering, only when used in conjunction with a Pavilion Building System, in lieu of the requirements of Sentence (1) Roof Covering Classification of the Building Code; all other requirements pertaining to the installation and construction are subject to the requirements of the Building Code and are subject to the following terms and conditions: Note: this Authorization is not intended to be used as an equivalent to CAN/ULC-S107- M87 where roof coverings are permitted to be used in the construction of traditional roofing systems Class A, B, and C as determined by CAN/ULC-S107-M87. Del-Scott-Co./ Pavilion Fabrication & Sales Page 3 of 6
4 A. Specific Terms & Conditions 1. This Authorization is valid only for the use of the Pavilion Membranes, Spiderweave FRU88X-6, or Spiderweave P708, when it is used in conjunction with a Pavilion Building System. 2. In addition to the requirements of Article of the Building Code, the structural design shall be carried out by a Professional Engineer as defined in the Professional Engineers Act, (Ontario) and who is qualified in the specific method applied. 3. When the Pavilion Membranes are installed in conjunction with a Pavilion Building System, together they shall be constructed as per the requirements of Subsection of the Building Code. 4. Except as permitted by Article of the Building Code, the Pavilion Membranes shall not be used where the assembly is required to have a fireresistance rating. 5. The Pavilion Membranes are authorized for use in combustible construction only. 6. The Pavilion Membranes shall not be used in a building more than 1 storey in building height. 7. The Pavilion Membranes shall not be used in the construction of Pavilion Building Systems where the major occupancy is Group B, C, or F Division 1, as defined by the Building Code. 8. The Pavilion Membranes shall meet the following standards: a. CAN/ULC-S109-M87 Standard for Flame Test of Flame-Resistant Fabrics and Films, b. NFPA Methods of Fire Test for Flame Propagation of Textiles and Films Test 2, and c. CAN/ULC-S102.2-M88 Standard Test Method for Surface Burning Characteristics of Building Materials. 9. The Pavilion Membranes shall be installed by Pavilion Building Systems approved installers. 10. The Pavilion Membranes shall be installed as per the Pavilion Building Systems Installation Manuals, and is subject to the products limitation as specified by the manufacturer. Del-Scott-Co./ Pavilion Fabrication & Sales Page 4 of 6
5 11. The Pavilion Membranes shall be identified by a permanent mark that indicates the manufacturer s name and registered trademark. 12. The Pavilion Membranes shall not have a flame spread rating more than 25, as specified in CAN/ULC-S102.2-M The Pavilion Membranes used in the construction of Pavilion Building Systems, shall have the spatial separation determined in accordance with Subsections or of the Building Code, where the roof membrane becomes a part of the exposing building face. B. General Conditions 1. The use of the Pavilion Membranes must comply with the Building Code Act, 1992 as amended or re-enacted from time to time and except as specifically authorized herein, with the Building Code as amended or remade from time to time. 2. A copy of this Authorization shall accompany each application for a building permit and shall be maintained on the site of the construction with the building permit. 3. The Applicant named in Part 1 hereof shall promptly notify the BMEC of: (a) (b) the failure of the Applicant, or of the material, system or building design that is the subject matter of this Authorization, to comply with any of the terms and conditions set out in 6. A. above; or the occurrence of any of the events described in Conditions 6. B. 4. (a) and (b) (ii) below. 4. The BMEC may amend or revoke this Authorization where it determines that: (a) any change has been made to: (i) (ii) (iii) the material, system or building design that is the subject matter of this Authorization; the address of the applicant specified in Part 1 of this Authorization; or, the ownership of the applicant specified in Part 1 of this Authorization. Del-Scott-Co./ Pavilion Fabrication & Sales Page 5 of 6
6 (b) the use of the material, system or building design authorized herein; (i) (ii) does not comply with the Building Code Act, 1992 or any relevant legislation as they may be amended or re-enacted from time to time; or provides an unsatisfactory level of performance, in situ. (c) (d) the Applicant, or the material, system or building design that is the subject matter of this Authorization, has failed to comply with any of the terms and conditions set out in this Authorization; or any Building Code provision relevant to this Authorization has been amended or remade. 5. Where the BMEC receives additional information concerning the material, system or building design authorized herein, the BMEC may review this Authorization and the BMEC may after the review amend or revoke this Authorization as in the opinion of the BMEC may be necessary. Dated at Toronto this 25 day of November BUILDING MATERIALS EVALUATION COMMISSION Edward Link, Vice-Chair Del-Scott-Co./ Pavilion Fabrication & Sales Page 6 of 6
Date of Authorization February 23, 2012 BMEC Authorization Number BMEC Application A BMEC Expiration Date February 23, 2017
777 Bay Street, 2 nd Floor 777, rue Bay, 2 e etage Toronto, Ontario, M5G 2E5 Toronto, Ontario, M5G 2E5 T: 416 585 4234 T: 416 585 4234 F: 416 585 7531 TC: 416 585 7531 W: www.ontario.ca/buildingcode/ W:
AUTHORIZATION REPORT. Steel Framed Fabric Covered Building System. 1. Applicant 2. Manufacturing Facilities Wanuskewin Road 3815 Wanuskewin Road
777 Bay Street, 2 nd Floor 777, rue Bay, 2 e etage Toronto, Ontario, M5G 2E5 Toronto, Ontario, M5G 2E5 T: 416 585 4234 T: 416 585 4234 F: 416 585 7531 TC: 416 585 7531 W: www.ontario.ca/buildingcode/ W:
Date of Authorization June 29, 2006 BMEC Authorization Authorization Report - Camino Modular Floor System: SC Series
Building Materials Evaluation Commission 777 Bay Street, 2 nd Floor Toronto, Ontario, M5G 2E5 Tel: 416 585-4234 / Fax: 416 585-7531 www.obc.mah.gov.on.ca Date of Authorization June 29, 2006 BMEC Authorization
Date of Authorization June 29, 2006 BMEC Authorization Authorization Report - Camino Modular Floor System: WC Series
Building Materials Evaluation Commission 777 Bay Street, 2 nd Floor Toronto, Ontario, M5G 2E5 Tel: 416 585-4234 / Fax: 416 585-7531 www.obc.mah.gov.on.ca Date of Authorization June 29, 2006 BMEC Authorization
Date of Authorization September 25, 2003 BMEC Authorization BMEC #
Building Materials Evaluation Commission 777 Bay Street, 16 nd Floor Toronto, Ontario, M5G2E5 Tel: 416: 585. 4234 / Fax: 416. 585. 7455 www.ontario.ca/buildingcode Date of Authorization September 25, 2003
Date of Authorization September 27, 2007 BMEC Authorization Number BMEC Application A
777 Bay Street, 2 nd Floor Toronto, Ontario, M5G 2E5 Tel: 416 585 4234 Fax: 416 585 7531 Web: www.ontario.ca/buildingcode/ Date of Authorization September 27, 2007 BMEC Authorization Number 07-04-334 BMEC
BMEC AUTHORIZATION: Camino Modular Floor System: SC Series
777 Bay Street, 16 th Floor Toronto, Ontario, M5G 2E5 777, rue Bay, 16 e etage Toronto, Ontario, M5G 2E5 T: F: W: 416 585 4234 416 585 7455 www.ontario.ca/buildingcode/ T: TC: W: 416 585 4234 416 585 7455
Authorization Report Insul-Tarp. 1. Applicant 2. Manufacturing Facilities
777 Bay Street, 2 nd Floor 777, rue Bay, 2 etage Toronto, Ontario, M5G 2E5 Toronto, Ontario, M5G 2E5 T: 416 585 4234 T: 416 585 4234 F: 416 585 7531 TC: 416 585 7531 W: www.ontario.ca/buildingcode/ W:
Date of Authorization APRIL 29, 2004 BMEC Authorization BMEC # BMEC Application #A
Building Materials Evaluation Commission 777 Bay Street, 2 nd Floor Toronto, Ontario, M5G 2E5 Tel: 416: 585. 4234 / Fax: 416. 585. 7531 www.obc.mah.gov.on.ca Date of Authorization APRIL 29, 2004 BMEC Authorization
Date of Authorization July 27, 2006 BMEC Authorization Number BMEC Application A
777 Bay Street, 2 nd Floor Toronto, Ontario, M5G 2E5 Tel: 416 585 4234 Fax: 416 585 7531 Web: www.obc.mah.gov.on. Date of Authorization July 27, 2006 BMEC Authorization Number 06-07-327 BMEC Application
Date of Authorization April 28, 2005 BMEC Authorization BMEC Application # A Date of Amendment February 28, 2013
777 Bay Street, 2 nd Floor Toronto, Ontario, M5G 2E5 T: 416 585 4234 F: 416 585 7531 W: www.ontario.ca/buildingcode/ 777, rue Bay, 2 e etage Toronto, Ontario, M5G 2E5 T: 416 585 4234 TC: 416 585 7531 W:
BUILDING MATERIALS EVALUATION COMMISSION (BMEC) Royal PVC DWV Starter Fittings
BUILDING MATERIALS EVALUATION COMMISSION (BMEC) DATE OF AUTHORIZATION OCTOBER 31, 2002 BMEC AUTHORIZATION BMEC # 02-06-277 BMEC APPLICATION #A2002-11 Royal PVC DWV Starter Fittings 1. Applicant 2. Manufacturing
BMEC Authorization Number Date of Issuance July 28, 2011 BMEC Application A Date of Expiration July 28, 2016
777 Bay Street, 2 nd Floor 777, rue Bay, 2 e etage Toronto, Ontario, M5G 2E5 Toronto, Ontario, M5G 2E5 T: 416 585 4234 F: 416 585 7531 W: www.ontario.ca/buildingcode/ T: 416 585 4234 TC: 416 585 7531 W:
BUILDING MATERIALS EVALUATION COMMISSION AUTHORIZATION REPORT
BUILDING MATERIALS EVALUATION COMMISSION AUTHORIZATION REPORT DATE OF AUTHORIZATION AUGUST 31, 2003 BMEC AUTHORIZATION BMEC # 03-07-286 BMEC APPLICATION #A2003-08 DATE OF AMENDMENT OCTOBER 30, 2004 DATE
Date of Authorization September 30, 2004 BMEC Authorization # BMEC Application A
Building Materials Evaluation Commission 777 Bay Street, 2 nd Floor Toronto, Ontario, M5G 2E5 Tel: 416: 585. 4234 / Fax: 416. 585. 7531 www.obc.mah.gov.on.ca Date of Authorization September 30, 2004 BMEC
BUILDING MATERIALS EVALUATION COMMISSION (BMEC) AUTHORIZATION REPORT
BUILDING MATERIALS EVALUATION COMMISSION (BMEC) AUTHORIZATION REPORT DATE OF AUTHORIZATION January 25, 2001 BMEC REFERENCE BMEC 01-04-256 BMEC APPLICATION BMEC #A 2000-24 CULTURED STONE 1. Applicant 2.
Date of Authorization July 25, 2013 BMEC Authorization Number BMEC Application A BMEC Expiration Date July 25, 2018
777 Bay Street, 2 nd Floor Toronto, Ontario, M5G 2E5 777, rue Bay, 2 e etage Toronto, Ontario, M5G 2E5 T: F: W: 416 585 4234 416 585 7531 www.ontario.ca/buildingcode/ T: TC: W: 416 585 4234 416 585 7531
BUILDING MATERIALS EVALUATION COMMISSION (BMEC) HPB (High Performance Bedding)
BUILDING MATERIALS EVALUATION COMMISSION (BMEC) DATE OF AUTHORIZATION DECEMBER 5, 2002 BMEC AUTHORIZATION BMEC # 02-08-279 BMEC APPLICATION #A2002-03 HPB (High Performance Bedding) 1. Applicant 2. Manufacturing
BUILDING MATERIALS EVALUATION COMMISSION (BMEC) AUTHORIZATION REPORT
BUILDING MATERIALS EVALUATION COMMISSION (BMEC) AUTHORIZATION REPORT DATE OF AUTHORIZATION January 25, 2001 BMEC REFERENCE BMEC 01-04-256 BMEC APPLICATION BMEC 2000-24 DATE OF AMENDMENT (Contact Information
Date of Authorization November 25, 2004 BMEC Authorization BMEC #
777 Bay Street, 2 nd Floor Toronto, Ontario, M5G 2E5 Tel: 416 585 4234 Fax: 416 585 7531 Web: www.ontario.ca/buildingcode/ Date of Authorization November 25, 2004 BMEC Authorization BMEC # 04-10-302 BMEC
Date of Authorization November 30, 2006 BMEC Authorization Number BMEC Application A
777 Bay Street, 2 nd Floor Toronto, Ontario, M5G 2E5 Tel: 416 585 4234 Fax: 416 585 7531 Web: www.obc.mah.gov.on. Date of Authorization BMEC Authorization Number 06-10-330 BMEC Application A2006-20 AUTHORIZATION
BMEC AUTHORIZATION:
777 Bay Street, 12 th Floor Toronto, Ontario, M5G 2E5 777, rue Bay, 12 e étage Toronto (Ontario) M5G 2E5 T: W: 416 585 4234 www.ontario.ca/buildingcode/ T: W : 416 585 4234 www.ontario.ca/buildingcode/
Date of Authorization April 29, 1999 BMEC Authorization Number BMEC Application A
777 Bay Street, 2 nd Floor 777, rue Bay, 2 e etage Toronto, Ontario, M5G 2E5 Toronto, Ontario, M5G 2E5 T: 416 585 4234 F: 416 585 7531 W: www.ontario.ca/buildingcode/ T: 416 585 4234 TC: 416 585 7531 W:
777, rue Bay, 2 e etage Toronto, Ontario, M5G 2E5
777 Bay Street, 2 nd Floor Toronto, Ontario, M5G 2E5 T: 416 585 4234 F: 416 585 7531 W: www.ontario.ca/buildingcode/ 777, rue Bay, 2 e etage Toronto, Ontario, M5G 2E5 T: 416 585 4234 TC: 416 585 7531 W:
BMEC Authorization Number Date of Issuance September 25, 2008 BMEC Application A Date of Expiration September 25, 2013
nd 777 Bay Street, 2 Floor 777, rue Bay, 2 e etage Toronto, Ontario, M5G 2E5 Toronto, Ontario, M5G 2E5 T: 416 585 4234 T: 416 585 4234 F: 416 585 7531 TC: 416 585 7531 W: www.ontario.ca/buildingcode/ W:
BUILDING MATERIALS EVALUATION COMMISSION (BMEC) AUTHORIZATION REPORT
BUILDING MATERIALS EVALUATION COMMISSION (BMEC) AUTHORIZATION REPORT DATE OF AUTHORIZATION NOVEMBER 29, 2001 BMEC REFERENCE BMEC # 01-19-271 BMEC APPLICATION # BMEC # A2001-11 BMEC AMENDMENT MARCH 25,
BMEC Authorization Number Date of Issuance September 26, 2013 BMEC Application A Date of Expiration September 26, 2018
777 Bay Street, 2 nd Floor Toronto, Ontario, M5G 2E5 T: 416 585 4234 F: 416 585 7531 W: www.ontario.ca/buildingcode/ 777, rue Bay, 2 e etage Toronto, Ontario, M5G 2E5 T: 416 585 4234 TC: 416 585 7531 W:
Date of Authorization January 26, 2012 BMEC Authorization Number BMEC Application A BMEC Expiration Date January 26, 2017
777 Bay Street, 2 nd Floor 777, rue Bay, 2 e etage Toronto, Ontario, M5G 2E5 Toronto, Ontario, M5G 2E5 T: 416 585 4234 T: 416 585 4234 F: 416 585 7531 TC: 416 585 7531 W: www.ontario.ca/buildingcode/ W:
Date of Authorization February 25, 2010 BMEC Authorization Number BMEC Application A BMEC Expiration Date February 26, 2015
777 Bay Street, 2 nd Floor 777, rue Bay, 2 e etage Toronto, Ontario, M5G 2E5 Toronto, Ontario, M5G 2E5 T: 416 585 4234 F: 416 585 7531 W: www.ontario.ca/buildingcode/ T: 416 585 4234 TC: 416 585 7531 W:
BUILDING MATERIALS EVALUATION COMMISSION (BMEC) AUTHORIZATION REPORT
BUILDING MATERIALS EVALUATION COMMISSION (BMEC) AUTHORIZATION REPORT DATE OF AUTHORIZATION OCTOBER 25, 2001 BMEC REFERENCE BMEC # 01-18-270 BMEC APPLICATION # BMEC # A2001-11 EZ Flow Drainage System 1.
BMEC AUTHORIZATION:
777 Bay Street, 2 nd Floor Toronto, Ontario, M5G 2E5 777, rue Bay, 2 e etage Toronto, Ontario, M5G 2E5 T: F: W: 416 585 4234 416 585 7531 www.ontario.ca/buildingcode/ T: TC: W: 416 585 4234 416 585 7531
BMEC AUTHORIZATION: Biolan Greywater System
777 Bay Street, 12 th Floor Toronto, Ontario, M5G 2E5 777, rue Bay, 12 e etage Toronto, Ontario, M5G 2E5 T: W: 416 585 4234 www.ontario.ca/buildingcode/ T: W: 416 585 4234 www.ontario.ca/buildingcode/
BMEC AUTHORIZATION:
777 Bay Street, 12 th Floor Toronto, Ontario, M5G 2E5 777, rue Bay, 12 e étage Toronto (Ontario) M5G 2E5 T: W: 416 585 4234 www.ontario.ca/buildingcode/ T: W : 416 585 4234 www.ontario.ca/buildingcode/
BUILDING CODE COMMISSION
Ruling No. 05-18-1032 Application No. 2005-11 BUILDING CODE COMMISSION IN THE MATTER OF Subsection 24(1) of the Building Code Act, S.O. 1992, c. 23, as amended. AND IN THE MATTER OF in Article 9.10.14.11.
BUILDING CODE COMMISSION
Ruling No. 02-04-859 Application No. 2001-81 BUILDING CODE COMMISSION IN THE MATTER OF Subsection 24(1) of the Building Code Act, S.O. 1992, c. 23, as amended. AND IN THE MATTER OF Sentences 3.2.3.7.(7)
Product Information Bulletin
Product Information Bulletin CCMC Evaluation Report 13101-R Advantage Insulating Concrete Forming (ICF) System BULLETIN NO. ISSUED: REPLACES: 201 November 25, 2010 January 2, 2009 Canadian Construction
BUILDING CODE COMMISSION
Ruling No. 10-35-1271 Application No. B-2010-26 BUILDING CODE COMMISSION IN THE MATTER OF Subsection 24(1) of the Building Code Act, S.O. 1992, c. 23, as amended. AND IN THE MATTER OF Article 4.3.4.3.
BUILDING CODE COMMISSION
Ruling No. 05-07-1021 Application No. 2005-02 BUILDING CODE COMMISSION IN THE MATTER OF Subsection 24(1) of the Building Code Act, S.O. 1992, c. 23, as amended. AND IN THE MATTER OF Article 3.2.2.67.,
SYNTHETIC SELF SUPPORT ROOFING UNDERLAY
FIRE RETARDANT FAST WRAP FLAMESPEC SS ROOF UNDERLAY This Appraisal replaces BRANZ Appraisal No. 715 (2011) Amended 29 June 2018. BRANZ Appraisals Technical Assessments of products for building and construction.
NEWS LETTER MARCH 27, 2009
PLANNING, BUILDING & DEVELOPMENT SERVICES DEPARTMENT 580-1 Street S.E. Medicine Hat, Alberta T1A 8E6 Telephone: 529-8374 FAX 502-8038 1 NEWS LETTER MARCH 27, 2009 GENERAL As you are probably aware there
PAULOID SYNTHETIC ROOFING UNDERLAY. Product. Scope. Building Regulations. Appraisal No. 984 [2017] Appraisal No. 984 (2017) BRANZ Appraisals
![PAULOID SYNTHETIC ROOFING UNDERLAY. Product. Scope. Building Regulations. Appraisal No. 984 [2017] Appraisal No. 984 (2017) BRANZ Appraisals](/thumbs/83/87447348.jpg "PAULOID SYNTHETIC ROOFING UNDERLAY. Product. Scope. Building Regulations. Appraisal No. 984 [2017] Appraisal No. 984 (2017) BRANZ Appraisals")
PAULOID SYNTHETIC ROOFING BRANZ Appraisals Technical Assessments of products for building and construction. Judea Holdings Ltd T/A Paul Industries PO Box 308 Tauranga 3140 Free phone: 0800 330 320 Tel:
BUILDING CODE COMMISSION
Ruling No. 02-22-877 Application No. 2002-19 BUILDING CODE COMMISSION IN THE MATTER OF Subsection 24(1) of the Building Code Act, S.O. 1992, c. 23, as amended. AND IN THE MATTER OF Sentences 3.3.1.2.(3),
BUILDING MATERIALS EVALUATION COMMISSION (BMEC) CONSOLIDATED AUTHORIZATION REPORT
BUILDING MATERIALS EVALUATION COMMISSION (BMEC) CONSOLIDATED AUTHORIZATION REPORT DATE OF AUTHORIZATION February 26, 1998 BMEC REFERENCE BMEC #98-01-224 A BMEC APPLICATION # BMEC A1997-06 * Denotes a new
Arxx High Performance Wallsystems
National Research Council Canada Institute for Research in Construction Conseil national de recherches Canada Institut de recherche en construction CCMC 12641-R &&0& EVALUATION DIVISION 03131 REPORT Issued
BUILDING CODE COMMISSION
Ruling No. 02-11-866 Application No. 2002-06 BUILDING CODE COMMISSION IN THE MATTER OF Subsection 24(1) of the Building Code Act, S.O. 1992, c. 23, as amended. AND IN THE MATTER OF Sentences 3.1.5.5.(1),
wall underlay Product BRANZ APPRAISAL No. 695 (2010) Scope Thermakraft Industries (NZ) Ltd PO Box Botany Manukau 2163 Auckland
Product 1.1 Watergate-Plus is a fire retardant, flexible synthetic wall underlay for use under direct fixed and non-direct fixed wall cladding on timber and steel framed buildings. The product is manufactured
BUILDING CODE COMMISSION
Ruling No. 04-27-982 Application No. 2004-19 BUILDING CODE COMMISSION IN THE MATTER OF Subsection 24(1) of the Building Code Act, S.O. 1992, c. 23, as amended. AND IN THE MATTER OF Sentence 9.8.8.8.(2)
WATERGATE-PLUS 295 FIRE RETARDANT WALL UNDERLAY. Product. Scope. Appraisal No. 695 [2017]
![WATERGATE-PLUS 295 FIRE RETARDANT WALL UNDERLAY. Product. Scope. Appraisal No. 695 [2017]](/thumbs/87/97396812.jpg "WATERGATE-PLUS 295 FIRE RETARDANT WALL UNDERLAY. Product. Scope. Appraisal No. 695 [2017]")
WATERGATE-PLUS 295 FIRE RETARDANT WALL UNDERLAY This Appraisal replaces BRANZ Appraisal No. 695 (2010) BRANZ Appraisals Technical Assessments of products for building and construction. Product 1.1 Watergate-Plus
SIKAPROOF A WATERPROOFING MEMBRANE. Product. Scope. Building Regulations. Appraisal No. 852 [2014] Appraisal No. 852 (2014) Amended 24 April 2018
![SIKAPROOF A WATERPROOFING MEMBRANE. Product. Scope. Building Regulations. Appraisal No. 852 [2014] Appraisal No. 852 (2014) Amended 24 April 2018](/thumbs/87/95266747.jpg "SIKAPROOF A WATERPROOFING MEMBRANE. Product. Scope. Building Regulations. Appraisal No. 852 [2014] Appraisal No. 852 (2014) Amended 24 April 2018")
SIKAPROOF A WATERPROOFING Amended 24 April 2018 BRANZ Appraisals Technical Assessments of products for building and construction. Sika (NZ) Ltd PO Box 19 192 Avondale Auckland 1746 Tel: 0800 SIKA NZ Fax:
A. Section Wood, Plastics and Composites.
-------------------------------------------------------------------------------------------------------------------------------- DesignWall550 Architectural Specifications CSI Sections 06, 09, 10 --------------------------------------------------------------------------------------------------------------------------------
SECTION CORK-FACED ACOUSTICAL WALL PANELS. A. Class A cork-faced acoustical wall panels manufactured from recycled wood fiber material.
SECTION 09843 CORK-FACED ACOUSTICAL WALL PANELS PART 1 GENERAL 1.1 SECTION INCLUDES A. Class A cork-faced acoustical wall panels manufactured from recycled wood fiber material. B. Class B cork-faced acoustical
BUILDING CODE COMMISSION
Ruling No. 03-54-952 Application No. 2003-64 BUILDING CODE COMMISSION IN THE MATTER OF Subsection 24(1) of the Building Code Act, S.O. 1992, c. 23, as amended. AND IN THE MATTER OF Article 6.2.3.2. of
***************************************************************** ** NOTE TO SPECIFIER **
SECTION 04720 INTERIOR THIN CAST STONE FABRICATIONS ** NOTE TO SPECIFIER ** Balmer Architectural Mouldings for Standard and Custom fabrications. This section is based on the Thin Cast Stone fabrications
BUILDING CODE VARIANCE
BUILDING CODE VARIANCE April 2009 06-BCV-011-R1 Page 1 of 8 DISCUSSION MULTI-LEVEL STORAGE RACKING SYSTEMS The Alberta Building Code 2006 contains no specific requirements for multi-level storage racking
National Construction Code Series (NCC) Building Code of Australia (BCA)
WATERGATE-PLUS FLEXIBLE HOUSE WRAP This Appraisal replaces BRANZ Appraisal No. 729 (2011) BRANZ Appraisals Technical Assessments of products for building and construction. Thermakraft Pty Limited PO Box
THERMO-LAG 3000 ARCHITECTURAL SPECIFICATION SUBLIMING FIRE RESISTANT MATERIAL ELECTRICAL RACEWAYS
THERMO-LAG 3000 Electrical ARCHITECTURAL SPECIFICATION SUBLIMING FIRE RESISTANT MATERIAL ELECTRICAL RACEWAYS PART 1 GENERAL 1.1 DESCRIPTION A. This section includes specifications for applying subliming,
BUILDING CODE COMMISSION
Ruling No. 02-13-868 Application No. 2002-11 BUILDING CODE COMMISSION IN THE MATTER OF Subsection 24(1) of the Building Code Act, S.O. 1992, c. 23, as amended. AND IN THE MATTER OF Articles 3.2.2.9. and
Technical Topics. Wood I-Joist Floors, Firefighters and Fire
Technical Topics TT-015G January 2016 Wood I-Joist Floors, Firefighters and Fire Prefabricated wood I-joists are used in approximately 50 percent of new raised-floor wood-frame construction. When compared
SECTION PRE-ENGINEERED BUILDING INSULATION
PART 1 GENERAL SECTION 07213 PRE-ENGINEERED BUILDING INSULATION Microsoft Word Instructions: Display hidden notes to specifier by using "Tools"/"Options"/"View"/"Hidden Text". 1.1 SECTION INCLUDES A. Pre-Engineered
Fire Considerations. Combustible Cladding and Components Of Exterior Walls and Curtain Walls. APEGBC/BCBEC Seminar, April
Fire Considerations Combustible Cladding and Components Of Exterior Walls and Curtain Walls APEGBC/BCBEC Seminar, April 21 2016 Andrew Harmsworth M Eng, P Eng, PE, CP Jun H. Kim, BASc, EIT Email: ah@ghl.ca/
BUILDING CODE COMMISSION
Ruling No. 09-17-1229 Application No. 2009-10 BUILDING CODE COMMISSION IN THE MATTER OF Subsection 24(1) of the Building Code Act, S.O. 1992, c. 23, as amended. AND IN THE MATTER OF with Article 9.19.1.1.
Expansion Joint Covers
Expansion Joint Covers 07 95 00 (079513) PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and Division-1
Product Guide Specification
January 2015 Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat,
ECHO PHYSICAL SPECIFICATIONS Abrasion Resistance: Up to 36,000 minimum cycles (cotton duck) Roll Size: 50 lineal yards Backing: Acrylic latex with Stain-Guard Fabric Width: 54 untrimmed Composition: 65%
WATERTIGHT ROOF UNDERLAY. Product. Scope. Building Regulations. Appraisal No. 938 [2017] Appraisal No. 938 (2017) BRANZ Appraisals
![WATERTIGHT ROOF UNDERLAY. Product. Scope. Building Regulations. Appraisal No. 938 [2017] Appraisal No. 938 (2017) BRANZ Appraisals](/thumbs/82/85306840.jpg "WATERTIGHT ROOF UNDERLAY. Product. Scope. Building Regulations. Appraisal No. 938 [2017] Appraisal No. 938 (2017) BRANZ Appraisals")
WATERTIGHT ROOF UNDERLAY Appraisal No. 938 (2017) BRANZ Appraisals Technical Assessments of products for building and construction. Techno Insulation Ltd PO Box 516 Silverdale North Auckland 0944 Tel:
BUILDING CODE COMMISSION
Ruling No. 09-06-1218 Application No. B-2009-04 BUILDING CODE COMMISSION IN THE MATTER OF Subsection 24(1) of the Building Code Act, S.O. 1992, c. 23, as amended. AND IN THE MATTER OF with Article 3.1.9.1.
Report on First Revision June 2014 NFPA 5000
5000 FR520 BLD-FUR (10.1 and 10.2) 10.1* General. 10.1.1 Application. Interior finish for buildings shall comply with this chapter. 10.1.2 Automatic Sprinkler Systems. Where another provision of this chapter
BRAMBLE PHYSICAL SPECIFICATIONS Abrasion Resistance: Up to 51,000+ minimum cycles (cotton duck) Roll Size: 50 lineal yards Backing: Acrylic latex with Stain-Guard Fabric Width: 54 untrimmed Composition:
Originally Issued: 11/06/2017 Valid Through: 11/30/2018
ACCELLA POLYURETHANE SYSTEMS, LLC. SEALTITE CC+ SPRAY-APPLIED POLYURETHANE FOAM PLASTIC INSULATION CSI Section: 07 21 00 Thermal Insulation 1.0 RECOGNITION insulations described in this report have been
BASF HP+ Wall XR Series Ontario TER No
TER No. 1706-02 BASF, Inc. 100 Park Ave Florham Park, NJ 07932-1089 973-245-6000 basf.com Issue Date: July 13, 2017 Updated: March 6, 2019 Subject to Renewal: January 1, 2020 DIVISION: 06 00 00 WOOD, PLASTICS,
BUILDING CODE COMMISSION
Ruling No. 08-24-1198 Application No. 2008-21 BUILDING CODE COMMISSION IN THE MATTER OF Subsection 24(1) of the Building Code Act, S.O. 1992, c. 23, as amended. AND IN THE MATTER OF with Sentence 9.19.1.1.(1)
Expansion Joint Covers (079513)
Expansion Joint Covers 07 95 00 (079513) PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and Division-1
TRAY-DEC FLOORING SYSTEM. Product. Scope. Building Regulations. Appraisal No. 841 [2014] Appraisal No. 841 (2014) BRANZ Appraisals
![TRAY-DEC FLOORING SYSTEM. Product. Scope. Building Regulations. Appraisal No. 841 [2014] Appraisal No. 841 (2014) BRANZ Appraisals](/thumbs/78/76969114.jpg "TRAY-DEC FLOORING SYSTEM. Product. Scope. Building Regulations. Appraisal No. 841 [2014] Appraisal No. 841 (2014) BRANZ Appraisals")
TRAY-DEC FLOORING SYSTEM BRANZ Appraisals Technical Assessments of products for building and construction. Product 1.1 The Tray-dec Flooring System comprises Ultra-Span 80, Concrete Saver 60 and Tray-dec
PRODUCT: Structural Insulated Panels (SIPs) DIVISION: Wood, Plastics, and Composites (06) SECTION: Structural Panels ( )
PRODUCT: Structural Insulated Panels (SIPs) DIVISION: Wood, Plastics, and Composites (06) SECTION: Structural Panels (06 12 00) Report Holder ACME Panel Company 1905 West Main St. Radford, VA 24141 Manufacturing
BUILDING CODE COMMISSION
Ruling No. 02-28-883 Application No. 2002-25 BUILDING CODE COMMISSION IN THE MATTER OF Subsection 24(1) of the Building Code Act, S.O. 1992, c. 23, as amended. AND IN THE MATTER OF Clauses 3.2.2.67.(2)(c)
Appraisal No. 719 (2011) BRANZ Appraisals Marshall Innovations Limited BRANZ
TRADE-SEAL PIPE AND SERVICES Amended 16 June 2014 s Technical Assessments of products for building and construction. Marshall Innovations Limited PO Box 9411 Greerton Tauranga Tel: 07 543 0948 Fax: 07
Originally Issued: 08/03/2017 Revised: 02/01/2019 Valid Through: 08/31/2019
ACCELLA POLYURETHANE SYSTEMS, LLC. 100 Enterprise Drive Cartersville, GA 30120 Phone: (770) 607-0755 www.accellapolyurethane.com BAYSEAL CC X AND BAYSEAL CC XP SPRAY-APPLIED POLYURETHANE FOAM PLASTIC INSULATION
FRP Specifications. Section Fiberglass Reinforced Polymer (FRP) Hollow Core Building Panels Products and Fabrications REVISED 11.
FRP Specifications Section 06 70 00 Fiberglass Reinforced Polymer (FRP) Hollow Core Building Panels Products and Fabrications REVISED 11.2016 BRISTOL FACILITY 400 Commonwealth Ave., P. O. Box 580, Bristol,
BUILDING CODE COMMISSION
Ruling No. 02-21-876 Application No. 2002-17 BUILDING CODE COMMISSION IN THE MATTER OF Subsection 24(1) of the Building Code Act, S.O. 1992, c. 23, as amended. AND IN THE MATTER OF Article 3.2.2.24. and
TENTS, CANOPIES AND OTHER MEMBRANE STRUCTURES
CHAPTER 24 TENTS, CANOPIES AND OTHER MEMBRANE STRUCTURES SECTION 2401 GENERAL 2401.1 Scope. Tents, canopies and membrane structures shall comply with this chapter. The provisions of Section 2403 are applicable
December 3, 2012 PARTIES INTERESTED IN INTUMESCENT FIRE-RESISTANT COATINGS FIELD-APPLIED TO PREFABRICATED WOOD I-JOISTS
December 3, 2012 TO: PARTIES INTERESTED IN INTUMESCENT FIRE-RESISTANT COATINGS FIELD-APPLIED TO PREFABRICATED WOOD I-JOISTS SUBJECT: Proposed Acceptance Criteria for Intumescent Fire-resistant Coatings
PRODUCT: Structural Insulated Panels (SIP) DIVISION: Wood and Plastics (06) SECTION: Structural Panels ( )
PRODUCT: Structural Insulated Panels (SIP) DIVISION: Wood and Plastics (06) SECTION: Structural Panels (06 12 16) Report Holder General Panel Corporation PO Box 279 2604 Sunset Drive Grenada, Mississippi
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES EVALUATION CRITERIA FOR ANCHORED MASONRY VENEER SYSTEM WITH POLYSTYRENE FOAM PLASTIC BACKING EC 021-2014 (Adopted
HCD DSA OSHPD 1 2 1/AC AC SS SS/CC CALIFORNIA BUILDING CODE 301
CALIFORNIA BUILDING CODE MATRIX ADOPTION TABLE CHAPTER 8 INTERIOR FINISHES (Matrix Adoption Tables are non-regulatory, intended only as an aid to the user. See Chapter 1 for state agency authority and
ATI Evaluation Service A Division of Architectural Testing Certification Services
ATI Evaluation Service A Division of Architectural Testing Certification Services Subject to Renewal: 04/08/2014 Issued: 04/08/2013 Visit www.ati-es.com for current status Revision: 11/11/2013 Page 1 of
Product Information Bulletin
Product Information Bulletin BULLETIN NO. ISSUED: REPLACES: 258 September 12, 2014 April 16, 2007 National Building Code 2010 Prescriptive Requirements for ICF Construction (see also attached Detail Dwgs.
BUILDING CODE COMMISSION
Ruling No. 03-07-905 Application No. 2002-51 BUILDING CODE COMMISSION IN THE MATTER OF Subsection 24(1) of the Building Code Act, S.O. 1992, c. 23, as amended. AND IN THE MATTER OF Sentence 3.2.2.35.(4)
June 7, 2012 PARTIES INTERESTED IN HVAC DUCT ENCLOSURE ASSEMBLIES
June 7, 2012 TO: PARTIES INTERESTED IN HVAC DUCT ENCLOSURE ASSEMBLIES SUBJECT: Revisions to the Acceptance Criteria for Metallic HVAC Duct Enclosure Assemblies, Subject AC179-0612-R1 (MB/CA) Dear Colleague:
Deer Ridge Consulting, Inc.
Deer Ridge Consulting, Inc. Code Compliance Research Report 505 Deer Ridge Lane Ararat, VA 24053 Office: 276-755-9162 Fax: 866-441-1054 www.deer-ridge-consulting.com Subject: NCFI 12-008 Spray Polyurethane
2010 National Building Code Adoption and Associated Process Changes
Building Inspection City of Moncton 655 Main Street Moncton, NB E1C 1E8 Phone: (506) 856-4375 Fax: (506) 856-4348 Bulletin No. 14 From: Randy Richard Date: February 9, 2015 Subject: 2010 National Building
Section 1: Activity Description
Ministry of the Environment and Climate Change Ministère de l Environnement et de l Action en matière de changement climatique ENVIRONMENTAL COMPLIANCE APPROVAL NUMBER: 0000000262 Version: 1.0 Issue Date:
Foamed-in-place insulation Sprayed insulation. Spray Foam Insulation for Residential Building Envelope Insulation
07 21 19 Foamed-in-place insulation 07 21 29 Sprayed insulation Spray Foam Insulation for Residential Building Envelope Insulation PART 1 - GENERAL 1.1 SUMMARY This document discusses the application of
COMMUNITY RISK REDUCTION BUREAU MANUAL CODE REQUREMENTS TEMPORARY TENTS AND MEMBRANE STRUCTURES EFFECTIVE: APRIL 1, 2016 AUTHORIZED: R.
COMMUNITY RISK REDUCTION BUREAU MANUAL CODE REQUREMENTS 423.7 TEMPORARY TENTS AND MEMBRANE STRUCTURES EFFECTIVE: APRIL 1, 2016 AUTHORIZED: R. Pearce SCOPE This policy applies to temporary tents, air-supported,
SECTION FABRICATED WALL PANEL ASSEMBLIES. A. American Institute of Steel Construction (A.I.S.C.) "Manual of Steel Construction.
SECTION 07 42 63 FABRICATED WALL PANEL ASSEMBLIES PART 1 GENERAL 1.1 SECTION INCLUDES A. Provide ACCEL-E steel thermal-efficient-panel wall system. 1.2 RELATED SECTIONS A. Section 05 40 00 - Cold Formed
JOHNS MANVILLE CONTINUOUS INSULATION WALL SYSTEM MASTER SPECIFICATION June 2014 CSI FORMAT SECTION FOIL-FACED RIGID INSULATION
CSI FORMAT SECTION PART 1 - GENERAL 1.1 SUMMARY A. Provide foil-faced thermal insulation in exterior wall assemblies, to function as a thermal, moisture, and air barrier wall system. 1.2 RELATED WORK A.
SECTION MULTI-USE COMPOSITE ALUMINUM PANELS
SECTION 07416 MULTI-USE COMPOSITE ALUMINUM PANELS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
Product Guide Specification
SofSURFACES, Inc. September 2004 4393 Discovery Line PO Box 239 Petrolia, Ontario N0N 1R0 Canada Toll Free (800) 263-2363 Phone (519) 882-8799 Fax (519) 882-2697 Website www.sofsurfaces.com E-mail alltinfo@sofsurfaces.com