DECLARATION OF PERFORMANCE

Size: px
Start display at page:

Download "DECLARATION OF PERFORMANCE"

Transcription

1 EN DECLARATION OF PERFORMANCE DoP No. Hilti HIT-HY CPR-M500-9/ Unique identification code of the product-type: Injection System Hilti HIT-HY Type, batch or serial number as required pursuant to Article 11(4): See: ETA-15/0197 ( ), annex A2. Batch number: see packaging of the product. 3. Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification: Generic type For use in Bonded anchor, Injection System Masonry made of solid bricks and hollow bricks: Clay bricks according to EN Calcium silicate bricks according to EN Light weight and normal weight concrete bricks according EN Option / Category Use category b and c (solid and hollow brick) Category d/d, w/d and w/w for clay, calcium silicate, light weight and normal weight concrete bricks Installation direction: horizontal Loading Static, quasi-static Zinc coated steel: For dry internal use only Hilti HIT-HY HIT-V(-F) (threaded rod): M8, M10, M12 Hilti HIT-HY HIT-IC (internally threaded sleeve): M8, M10, M12 Material Stainless steel A4: For internal and external use with no particular aggressive conditions Hilti HIT-HY HIT-V-R (threaded rod): M8, M10, M12 High corrosion resistant steel: For internal and external use with particular aggressive conditions Hilti HIT-HY HIT-V-HCR (threaded rod): M8, M10, M12 Sieve sleeve HIT-SC 16, 18 and 22. Temperature range (if applicable) Ta: -40 to +40 C (short term), +24 C (long term) Tb: -40 to +80 C (short term), +50 C (long term) 4. Name, registered trade name or registered trade mark and contact address as required pursuant to Article 11(5): Hilti Corporation, Business Unit Anchors, 9494 Schaan, Fürstentum Liechtenstein 5. Where applicable, name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12(2): - 6. System or systems of assessment and verification of constancy of performance of the construction product as set out in Annex V: System 1 7. In case of the declaration of performance concerning a construction product covered by a harmonised standard - 8. In case of the declaration of performance concerning a construction product for which a European Technical Assessment has been issued: Technical Assessment Body: Deutsches Institut für Bautechnik (DIBt) European Technical Approval: ETA-15/0197 ( ) DoP_en_02-01_ _HIT-HY_170_masonry.docx

2 European Technical Approval Guideline: ETAG 029 Certificate of Conformity: 1343-CPR-M500-9/ Declared performance: Essential characteristics Design method Performance Harmonized Technical Specification Characteristic resistance for tension ETAG 029 Annex C method: A ETA-15/0197 annex C3, C4, C5, C6, C7, C8 Characteristic resistance for shear ETAG 029 Annex C method: A ETA-15/0197 annex C3, C4, C5, C6, C7, C8 ETAG 029 Minimum and characteristic spacing and edge distance ETAG 029 Annex C method: A ETA-15/0197 annex C3, C4, C5, C6, C7, C8 Displacement for serviceability limit state ETAG 029 Annex C method: A ETA-15/0197 annex C3, C4, C5, C6, C7, C8 10. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 9. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. Signed for and on behalf of the manufacturer by: Raimund Zaggl Business Unit Head Business Unit Anchors Seppo Perämäki Head of Quality Business Unit Anchors Hilti Corporation Schaan, DoP_en_02-01_ _HIT-HY_170_masonry.docx

3 Specifications of intended use Base materials: Solid brick masonry (use category b), according to Annex B3. Note: The characteristic resistances are also valid for larger brick sizes and larger compressive strengths of the masonry unit. Hollow brick masonry (use category c), according to Annex B3 and B5. Mortar strength class of the masonry: M2,5 at minimum according to EN 998-2: For masonry made of other solid, hollow or perforated bricks, the characteristic resistance of the anchor may be determined by job site tests according to ETAG 029, Annex B under consideration of the β-factor according to Annex C1, Table C1. Table B1: Overview use categories Anchorages subject to: HIT-HY 170 with threaded rod, HIT-V- or HIT-IC in solid bricks in hollow bricks Hole drilling hammer mode rotary mode Static and quasi static loading Use category: dry or wet structure Installation direction Annex: C2 (steel), Annex: C2 (steel), C3, C4 C5, C6, C7, C8 Category d/d - Installation and use in structures subject to dry internal conditions. Category w/d - Installation in dry or wet substrate and use in structures subject to dry internal conditions Category w/w - Installation and use in structures subject to dry or wet environmental conditions horizontal Use category b (solid masonry) c (hollow or perforated masonry) Temperature in the base material at installation +5 C to +40 C (Table B9) -5 C to +40 C (Table B10) In-service Temperature range Ta: -40 C to +40 C (max. long term temperature +24 C and max. short term temperature +40 C) temperature Temperature range Tb: -40 C to +80 C (max. long term temperature +50 C and max. short term temperature +80 C)

4 Use conditions (Environmental conditions): Structures subject to dry internal conditions (zinc coated steel, stainless steel or high corrosion resistant steel). Structures subject to external atmospheric exposure (including industrial and marine environment) and to permanently damp internal conditions, if no particular aggressive conditions exist (stainless steel or high corrosion resistant steel). Structures subject to external atmospheric exposure and to permanently damp internal conditions, if other particular aggressive conditions exist (high corrosion resistant steel). Note: Particular aggressive conditions are e.g. permanent, alternating immersion in seawater or the splash zone of seawater, chloride atmosphere of indoor swimming pools or atmosphere with extreme chemical pollution (e.g. in desulphurization plants or road tunnels where de-icing products are used). Design: Anchorages are designed under the responsibility of an engineer experienced in anchorages and masonry work. Verifiable calculation notes and drawings are prepared taking account of the loads to be anchored. The position of the anchor is indicated on the design drawings (e. g. position of the anchor relative to supports). Anchorages under static or quasi-static loading are designed in accordance with: ETAG 029, Annex C, Design method A. Installation: Anchor installation carried out by appropriately qualified personnel and under the supervision of the person responsible for technical matters of the site.

5 Table B2: Overview brick types and properties Brick type Picture Brick size [mm] Compressive strength [N/mm²] Bulk density [kg/dm³] Annex Solid clay brick EN x115x ,0 C3 Solid calcium silicate brick EN x115x / 28 2,0 C4 Hollow clay brick EN x240x / 20 1,4 C5 Hollow calcium silicate brick EN x240x / 20 1,4 C6 Hollow lightweight concrete brick EN Hollow normal weight concrete brick EN x240X238 2 / 6 0,8 C7 500x200x200 4 / 10 1,0 C8

6 Table B3: Overview fastening elements (including sizes) and corresponding brick types. Embedment depth hef = 80 mm Brick type Picture HIT-V 1) HIT-IC HIT-V 1) + HIT-SC HIT-IC + HIT-SC Annex Solid clay brick EN M8 to M12 M8 to M12 M8 to M12 M8 to M12 C3 Solid calcium silicate brick EN M8 to M12 M8 to M12 M8 to M12 M8 to M12 C4 Hollow clay brick EN M8 to M12 M8 to M12 C5 Hollow calcium silicate brick EN M8 to M12 M8 to M12 C6 Hollow lightweight concrete brick EN Hollow normal weight concrete brick EN M8 to M12 M8 to M12 C7 - - M8 to M12 M8 to M12 C8 1) Commercial standard threaded rods can also be used.

7 Table B4: Details of hollow bricks Hollow clay brick EN Hollow calcium silicate brick EN Rapis Ziegel Hlz 12-1,4-10DF KS Südbayern KSL-R(P) 12-1,4-8DF Hollow lightweight concrete brick EN Knobel Betonwerk Hbl 6-0,8-500x240x238 Hollow normal weight concrete brick EN Parpaing creux B40

8 Table C1: -factor for job-site testing under tension loading Use categories w/w and w/d d/d Temperature range Ta 1) Tb 1) Ta 1) Tb 1) Base material Elements HIT-V 2) or HIT-IC Solid clay brick EN HIT-V 2) + HIT-SC HIT-IC + HIT-SC 0,97 0,83 0,97 0,83 Solid calcium silicate brick EN HIT-V 2) or HIT-IC HIT-V 2) + HIT-SC HIT-IC + HIT-SC 0,96 0,84 0,97 0,84 0,69 0,62 0,91 0,82 Hollow clay brick EN HIT-V 2) + HIT-SC HIT-IC + HIT-SC 0,97 0,83 0,97 0,83 Hollow calcium silicate brick EN HIT-V 2) + HIT-SC HIT-IC + HIT-SC 0,69 0,62 0,91 0,82 Hollow light weight concrete brick EN HIT-V 2) + HIT-SC HIT-IC + HIT-SC 0,89 0,81 0,97 0,86 Hollow normal weight concrete brick EN HIT-V 2) + HIT-SC HIT-IC + HIT-SC 0,97 0,80 0,97 0,80 1) Temperature range Ta / Tb see Annex B1 2) Commercial standard threaded rods can also be used.

9 Table C2: Characteristic values of steel resistance for threaded rod, HIT-V- under tension and shear loads in masonry HIT-HY 170 with threaded rod, HIT-V- M8 M10 M12 Steel failure tension loads Characteristic steel resistance NRk,s [kn] As fuk Steel failure shear loads without lever arm Characteristic steel resistance VRk,s [kn] 0,5 As fuk Steel failure shear loads with lever arm Characteristic bending moment MRk,s [kn] 1,2 Wel fuk Table C3: Characteristic values of steel resistance for internally threaded sleeve HIT-IC under tension and shear loads in masonry HIT-HY 170 with HIT-IC M8 M10 M12 Steel failure tension loads Characteristic steel resistance NRk,s [kn] 5,9 7,3 13,8 Partial safety factor Ms,N [-] 1,50 Steel failure shear loads without lever arm Characteristic steel resistance VRk,s [kn] 0,5 As fuk Steel failure shear loads with lever arm Characteristic bending moment MRk,s [Nm] 1,2 Wel fuk

10 Brick type: Solid clay brick Mz, 2DF Table C4: Description of brick Brick type Solid Mz, 2DF Bulk density ρ [kg/dm³] 2,0 Compressive strength fb [N/mm²] 12 Code EN Producer Brick dimensions [mm] 240 x 115 x 113 Minimum wall thickness hmin [mm] 115 Table C5: Installation parameter for all anchor combinations (see Table B3) Anchor type see Table B Edge distance cmin = ccr [mm] 115 Spacing Ac smin II = scr II [mm] 240 smin = scr [mm] 115 Table C6: Group factor for group fastenings Group factor αg,n II αg,v II αg,n αg,v [-] 2 at ccr and scr Table C7: Characteristic tension resistance at edge distance c ccr Use category w/w = w/d d/d Service temperature range (Ta) (Tb) (Ta) (Tb) Anchor type and size hef [mm] fb [N/mm²] NRk [kn] HIT-V 1) M8, M10, M ,0 2,5 3,0 2,5 HIT-IC HIT-V 1) + HIT-SC M8 3,0 2,5 3,0 2, M10, M12 4,0 3,5 4,0 3,5 M8, M10, M ,0 3,5 4,0 3,5 HIT-IC + HIT-SC M8, M10, M ,0 3,5 4,0 3,5 1) Commercial standard threaded rods can also be used. Table C8: Characteristic shear resistance at edge distance c ccr Use category w/w = w/d d/d Service temperature range (Ta) (Tb) (Ta) (Tb) Anchor type and size hef [mm] fb [N/mm²] VRk [kn] All anchors M8. M10, M ,5

11 Table C9: Displacements hef [mm] N [kn] N0 [mm] N [mm] V [kn] V0 [mm] V [mm] 80 0,9 0,2 0,4 1,0 1,0 1,5

12 Brick type: Solid calcium silicate brick KS, 2DF Table C10: Description of brick Brick type Solid KS, 2DF Bulk density ρ [kg/dm³] 2,0 Compressive strength fb [N/mm²] 12 or 28 Code EN Producer Brick dimensions [mm] 240 x 115 x 113 Minimum wall thickness hmin [mm] 115 Table C11: Installation parameter for all anchor combinations (see Table B) Anchor type see Table B Edge distance cmin = ccr [mm] 115 Spacing Ac smin II = scr II [mm] 240 smin = scr [mm] 115 Table C12: Group factor for group fastenings Group factor αg,n II αg,v II αg,n αg,v [-] 2 at ccr and scr Table C13: Characteristic tension resistance at edge distance c ccr Use category w/w = w/d d/d Service temperature range (Ta) (Tb) (Ta) (Tb) Anchor type and size hef [mm] fb [N/mm²] NRk [kn] HIT-V 1) HIT-IC M8, M10, M ,5 5,0 6,0 5,0 28 8,5 7,5 8,5 7,5 HIT-V 1) +HIT-SC HIT-IC +HIT-SC M8, M10, M ,0 3,5 5,5 5,0 28 6,0 5,5 8,0 7,5 1) Commercial standard threaded rods can also be used. Table C14: Characteristic shear resistance at edge distance c ccr Use category w/w = w/d d/d Service temperature range (Ta) (Tb) (Ta) (Tb) Anchor type and size hef [mm] fb [N/mm²] VRk [kn] All anchors M8, M10, M ,0 28 6,0

13 Table C15: Displacements hef [mm] N [kn] N0 [mm] N [mm] V [kn] V0 [mm] V [mm] 80mm 2,3 0,2 0,4 1,5 1,2 1,8

14 Brick type: Hollow clay brick Hlz, 10DF Table C16: Description of brick Brick type [-] Hlz 12-1,4-10 DF Bulk density ρ [kg/dm³] 1,4 Compressive strength fb [N/mm²] 12 or 20 Code [-] EN Producer [-] Rapis (D) Brick dimensions [mm] 300 x 240 x 238 Minimum wall thickness hmin [mm] 240 Drawing of the brick see Table B4Table B Table C17: Installation parameter for all anchor combinations (see Table B) Anchor type see Table B Edge distance cmin = ccr [mm] 150 Spacing Ac smin II = scr II [mm] 300 smin = scr [mm] 240 Table C18: Group factor for group fastenings Group factor αg,n II αg,v II αg,n αg,v [-] 2 at ccr and scr Table C19: Characteristic tension resistance at edge distance c ccr Use category w/w = w/d d/d Service temperature range (Ta) (Tb) (Ta) (Tb) Anchor type and size hef [mm] fb [N/mm²] NRk [kn] HIT-V 1) +HIT-SC HIT-IC+ HIT-SC M8, M10, M ,0 2,5 3,0 2,5 20 3,5 3,0 3,5 3,0 1) Commercial standard threaded rods can also be used. Table C20: Characteristic shear resistance at edge distance c ccr Use category w/w = w/d d/d Service temperature range (Ta) (Tb) (Ta) (Tb) Anchor type and size hef [mm] fb [N/mm²] VRk [kn] HIT-V 1) +HIT-SC 12 2,0 HIT-IC +HIT-SC M8, M10, M ,0 1) Commercial standard threaded rods can also be used.

15 Table C21: Displacements hef [mm] N [kn] N0 [mm] N [mm] V [kn] V0 [mm] V [mm] 80 0,9 0,2 0,3 0,9 1,0 1,5

16 Brick type: Hollow calcium silicate brick KSL, 8DF Table C22: Description of brick Brick type KSL-12-1,4-8 DF Bulk density ρ [kg/dm³] 1,4 Compressive strength fb [N/mm²] 12 or 20 Code EN Producer KS Südbayern (D) Brick dimensions [mm] 248 x 240 x 238 Minimum wall thickness hmin [mm] 240 Drawing of the brick see Error! Reference source not found.table B Table C23: Installation parameter for all anchor combinations (see Table B) Anchor type see Table B Edge distance cmin = ccr [mm] 125 Spacing Ac smin II = scr II [mm] 248 smin = scr [mm] 240 Table C24: Group factor for group fastenings Group factor αg,n II αg,v II αg,n αg,v [-] 2 at ccr and scr Table C25: Characteristic tension resistance at edge distance c ccr Use category w/w = w/d d/d Service temperature range (Ta) (Tb) (Ta) (Tb) Anchor type and size hef [mm] fb [N/mm²] NRk [kn] HIT-V 1) +HIT-SC HIT-IC+HIT-SC M8, M10, M ,0 2,5 3,5 3,0 20 4,0 3,5 5,0 4,5 1) Commercial standard threaded rods can also be used. Table C26: Characteristic shear resistance at edge distance c ccr Use category w/w = w/d d/d Service temperature range (Ta) (Tb) (Ta) (Tb) Anchor type and size hef [mm] fb [N/mm²] VRk [kn] HIT-V 1) +HIT-SC 12 8,5 HIT-IC +HIT-SC M8, M10, M ,0 1) Commercial standard threaded rods can also be used.

17 Table C27: Displacements hef [mm] N [kn] N0 [mm] N [mm] V [kn] V0 [mm] V [mm] 80 1,8 0,2 0,3 3,4 2,5 3,8

18 Brick type: Hollow lightweight concrete brick Hbl, 16DF Table C28: Description of brick Brick type [-] Hbl-4-0,7 Bulk density ρ [kg/dm³] 0,8 Compressive strength fb [N/mm²] 2 or 6 Code [-] EN Producer [-] Knobel (D) Brick dimensions [mm] 495 x 240 x 238 Minimum wall thickness hmin [mm] 240 Drawing of the brick see Table B4Table B Table C29: Installation parameter for all anchor combinations (see Table B3) Anchor type see Table B3 Edge distance cmin = ccr [mm] 250 smin II = scr II [mm] 240 Spacing Ac smin = scr [mm] 240 Table C30: Group factor for group fastenings Group factor αg,n II αg,v II αg,n αg,v [-] 2 at ccr and scr Table C31: Characteristic tension resistance at edge distance c ccr Use category w/w = w/d d/d Service temperature range (Ta) (Tb) (Ta) (Tb) Anchor type and size hef [mm] fb [N/mm²] NRk [kn] HIT-V 1) + HIT-SC HIT-IC + HIT-SC M8, M10, M ,2 0,9 1,5 1,2 6 2,0 1,5 2,5 2,0 1) Commercial standard threaded rods can also be used. Table C32: Characteristic shear resistance at edge distance c ccr Use category w/w = w/d d/d Service temperature range (Ta) (Tb) (Ta) (Tb) Anchor type and size hef [mm] fb [N/mm²] VRk [kn] HIT-V 1) + HIT-SC HIT-IC + HIT-SC M8, M10, M ,5 6 4,0 1) Commercial standard threaded rods can also be used.

19 Table C33: Displacements hef [mm] N [kn] N0 [mm] N [mm] V [kn] V0 [mm] V [mm] 80 2,4 0,2 0,4 3,4 1,3 1,9

20 Brick type: Hollow normal weight concrete brick - parpaing creux Table C34: Description of brick Brick type [-] B40 Bulk density ρ [kg/dm³] 1,0 Compressive strength fb [N/mm²] 4 or 10 Code [-] EN Producer [-] Fabemi (F) Brick dimensions [mm] 500 x 200 x 200 Minimum wall thickness hmin [mm] 200 Drawing of the brick see Table B4Table B Table C35: Installation parameter for all anchor combinations (see Table B3) Anchor type see Table B3 Edge distance cmin = ccr [mm] 200 Spacing Ac smin II = scr II [mm] 200 smin = scr [mm] 200 Table C36: Group factor for group fastenings Group factor αg,n II αg,v II αg,n αg,v [-] 2 at ccr and scr Table C37: Characteristic tension resistance at edge distance c ccr Use category w/w = w/d d/d Service temperature range (Ta) (Tb) (Ta) (Tb) Anchor type and size hef [mm] fb [N/mm²] NRk [kn] HIT-V 1) + HIT-SC HIT-IC + HIT-SC M8, M10, M ,9 0,9 0,9 0,9 10 1,2 1,2 1,5 1,5 1) Commercial standard threaded rods can also be used. Table C38: Characteristic shear resistance at edge distance c ccr Use category w/w = w/d d/d Service temperature range (Ta) (Tb) (Ta) (Tb) Anchor type and size hef [mm] fb [N/mm²] VRk [kn] HIT-V 1) + HIT-SC HIT-IC + HIT-SC M8, M10, M ,5 10 4,0 1) Commercial standard threaded rods can also be used.

21 Table C39: Displacements hef [mm] N [kn] N0 [mm] N [mm] V [kn] V0 [mm] V [mm] 80 1,0 0,6 1,2 2,3 0,6 0,9

22 EN DECLARATION OF PERFORMANCE DoP No. Hilti HIT-HY CPR-M500-8/ Unique identification code of the product-type: Injection System Hilti HIT-HY Type, batch or serial number as required pursuant to Article 11(4): See: ETA-14/0457 ( ), annex A1, A2. Batch number: see packaging of the product. 3. Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification: Generic type Bonded anchor, Injection System For use in Option / Category Loading Concrete (C20/25 to C50/60): bore holes made with hammer drilling cracked: M10-M16 non-cracked: M8-M24 Option 1 Static, quasi-static Material Zinc coated steel: For dry internal use only HIT-HY HIT-V(-F) (threaded rod): M8, M10, M12, M16, M20, M24 HIT-HY HIS-N (internally threaded sleeve): M8, M10, M12, M16 Stainless steel A4: For internal and external use with no particular aggressive conditions HIT-HY HIT-V-R (threaded rod): M8, M10, M12, M16, M20, M24 HIT-HY HIS-RN (internally threaded sleeve): M8, M10, M12, M16 High corrosion resistant steel: For internal and external use with particular aggressive conditions HIT-HY HIT-V-HCR (threaded rod): M8, M10, M12, M16, M20, M24 Temperature range (if applicable) Temperature range I: -40 C to + 40 C (max. long term temperature +24 C and max. short term temperature +40 C) Temperature range II: -40 C to + 80 C (max. long term temperature +50 C and max. short term temperature +80 C 4. Name, registered trade name or registered trade mark and contact address as required pursuant to Article 11(5): Hilti Corporation, Business Unit Anchors, 9494 Schaan, Fürstentum Liechtenstein 5. Where applicable, name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12(2): - 6. System or systems of assessment and verification of constancy of performance of the construction product as set out in Annex V: System 1 7. In case of the declaration of performance concerning a construction product covered by a harmonised standard - DoP_01-01_ _Hilti_HIT-HY_200-A_anchor_0756-CPD-0457.docx

23 8. In case of the declaration of performance concerning a construction product for which a European Technical Assessment has been issued: Technical Assessment Body: Deutsches Institut für Bautechnik (DIBt) European Technical Assessment: ETA-14/0457 ( ) European Technical Approval Guideline: ETAG 001 Part 1, 5 Certificate of Conformity: 1343-CPR-M500-8/ Declared performance: Essential characteristics Design method Performance Harmonized Technical Specification Characteristic resistance for tension EOTA TR 029 method: A ETA-14/0457 annex C1, C2 Characteristic resistance for shear EOTA TR 029 method: A ETA-14/0457 annex C1, C3 ETAG 001 Part 1, 5 Minimum spacing and minimum edge distance EOTA TR 029 method: A ETA-14/0457 annex B3, B4 Displacement for serviceability limit state EOTA TR 029 method: A ETA-14/0457 annex C4 10. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 9. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. Signed for and on behalf of the manufacturer by: Raimund Zaggl Business Unit Head Business Unit Anchors Seppo Perämäki Head of Quality Business Unit Anchors Hilti Corporation Schaan, DoP_01-01_ _Hilti_HIT-HY_200-A_anchor_0756-CPD-0457.docx

24 Table C1: Characteristic values of resistance for threaded rod, HIT-V- under tension loads in concrete HIT-HY 170 with threaded rod, HIT-V- M8 M10 M12 M16 M20 M24 Installation safety factor 2 1,0 Steel failure Characteristic steel resistance N Rk,s [kn] A s f uk Combined pullout and concrete cone failure Characteristic bond resistance in non-cracked concrete C20/25 Temperature range I: 40 C/24 C Rk,ucr [N/mm 2 ] 10,0 Temperature range II: 80 C/50 C Rk,ucr [N/mm 2 ] 7,5 Characteristic bond resistance in cracked concrete C20/25 Temperature range I: 40 C/24 C Rk,cr [N/mm 2 ] - 5,5 - Temperature range II: 80 C/50 C Rk,cr [N/mm 2 ] - 4,0 - Increasing factors for Rk in concrete Splitting failure Edge distance c cr,sp [mm] for c C30/37 1,04 C40/50 1,07 C50/60 1,09 h / h ef 2,0 1,0 h ef 2,0 > h / h ef > 1,3 4,6 h ef - 1,8 h h / h ef 1,3 2,26 h ef h/hef 2,0 1,3 1,0 hef 2,26 hef ccr,sp Spacing s cr,sp [mm] 2 c cr,sp Table C2: Characteristic values of resistance for threaded rod, HIT-V- under shear loads in concrete HIT-HY 170 with threaded rod, HIT-V- M8 M10 M12 M16 M20 M24 Steel failure without lever arm Characteristic steel resistance V Rk,s [kn] 0,5 A s f uk Steel failure with lever arm Characteristic bending moment M 0 Rk,s [Nm] 1,2 W el f uk Concrete pry-out failure Factor in equation (5.7) of Technical Report TR 029 for the design of bonded anchors k [-] 2,0

25 Table C3: Characteristic values of resistance for internally threaded sleeve HIS-(R)N under tension loads in non-cracked concrete HIT-HY 170 with HIS-(R)N M8 M10 M12 M16 Installation safety factor 2 [-] 1,0 Steel failure HIS-N with screw grade 8.8 N Rk,s [kn] Partial safety factor Ms,N [-] 1,50 HIS-RN with screw grade 70 N Rk,s [kn] Partial safety factor Ms,N [-] 1,87 Combined pullout and concrete cone failure Characteristic bond resistance in non-cracked concrete C20/25 Temperature range I: 40 C/24 C Rk,ucr [N/mm 2 ] 10,0 Temperature range II: 80 C/50 C Rk,ucr [N/mm 2 ] 7,5 Increasing factors for Rk,ucr in concrete Splitting failure c,ucr C30/37 1,04 C40/50 1,07 C50/60 1,09 Edge distance c cr,sp [mm] for h / h ef 2,0 1,0 h ef 2,0 > h / h ef > 1,3 4,6 h ef - 1,8 h h/hef 2,0 1,3 h / h ef 1,3 2,26 h ef 1,0 hef 2,26 hef ccr,sp Spacing s cr,sp [mm] 2 c cr,sp

26 Table C4: Characteristic values of resistance for internally threaded sleeve HIS-(R)N under shear loads in non-cracked concrete HIT-HY 170 with HIS-(R)N M8 M10 M12 M16 Steel failure without lever arm HIS-N with screw grade 8.8 V Rk,s [kn] Partial safety factor Ms,V [-] 1,25 HIS-RN with screw grade 70 V Rk,s [kn] Partial safety factor Ms,V [-] 1,56 Steel failure with lever arm HIS-N with screw grade 8.8 M 0 Rk,s [Nm] Partial safety factor Ms,V [-] 1,25 HIS-RN with screw grade 70 M 0 Rk,s [Nm] Partial safety factor Ms,V [-] 1,56 Concrete pry-out failure Factor in equation (5.7) of Technical Report TR 029 for the design of bonded anchors k [-] 2,0

27 Table B1: Installation parameters of threaded rod, HIT-V- HIT-HY 170 with threaded rod, HIT-V- M8 M10 M12 M16 M20 M24 Diameter of element d [mm] Nominal diameter of drill bit d 0 [mm] Range of effective embedment depth and depth of drilled hole h ef = h 0 1) for larger clearance hole see TR 029 section 1.1 [mm] Maximum diameter of clearance hole in the fixture 1) d f [mm] Minimum thickness of concrete member h min [mm] 60 to to 120 h ef + 30 mm 100 mm 70 to to to 240 h ef + 2 d 0 Maximum torque moment T max [Nm] Minimum spacing s min [mm] Minimum edge distance c min [mm] to 288 Table B2: Installation parameters of internally threaded sleeve HIS-(R)N HIT-HY 170 with HIS-(R)N M8 M10 M12 M16 Outer diameter of sleeve d [mm] 12,5 16,5 20,5 25,4 Nominal diameter of drill bit d 0 [mm] Effective embedment depth and drill hole depth 1) for larger clearance hole see TR 029 section 1.1 h ef = h 0 [mm] Maximum diameter of clearance hole in the fixture 1) d f [mm] Minimum thickness of concrete member h min [mm] Maximum torque moment T max [Nm] Thread engagement length min-max h s [mm] Minimum spacing s min [mm] Minimum edge distance c min [mm]

28 Table C5: Displacement under tension load in mm/(n/mm²) HIT-HY 170 with threaded rod, HIT-V- M8 M10 M12 M16 M20 M24 Non-cracked concrete Displacement N0 [mm/(n/mm²)] 0,07 0,07 0,07 0,08 0,08 0,09 Displacement N [mm/(n/mm²)] 0,07 0,07 0,07 0,08 0,08 0,09 Cracked concrete Displacement N0 [mm/(n/mm²)] - 0,07 0,07 0, Displacement N [mm/(n/mm²)] - 0,11 0,11 0, Table C6: Displacement under shear load in mm/(n/mm²) HIT-HY 170 with threaded rod, HIT-V- M8 M10 M12 M16 M20 M24 Displacement V0 [mm/(n/mm²)] 0,06 0,06 0,05 0,04 0,04 0,03 Displacement V [mm/(n/mm²)] 0,09 0,08 0,08 0,06 0,06 0,05 Table C7: Displacement under tension load in mm/(n/mm²) HIT-HY 170 with HIS-(R)N M8 M10 M12 M16 Non-cracked concrete Displacement N [mm/(n/mm²)] 0,06 0,07 0,08 0,09 Displacement N [mm/(n/mm²)] 0,06 0,07 0,08 0,09 Table C8: Displacement under shear load in mm/(n/mm²) HIT-HY 170 with HIS-(R)N M8 M10 M12 M16 Displacement V0 [mm/(n/mm²)] 0,10 0,10 0,10 0,10 Displacement V [mm/(n/mm²)] 0,15 0,15 0,15 0,15

29 EN DECLARATION OF PERFORMANCE DoP No. Hilti HIT-HY CPR-M500-13/ Unique identification code of the product-type: Injection System Hilti HIT-HY Type, batch or serial number as required pursuant to Article 11(4): See: ETA-15/0297 ( ), annex A3 Batch number: see packaging of the product. 3. Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification: Generic type Injection system for post-installed rebar connections with mortar Concrete (C12/15 to C50/60): non-carbonated For use in maximum allowable chloride contents of the concrete: 0,40% bore holes made with hammer drilling or compressed air drilling Option / Category - Loading Material Static or quasi-static loading, fire exposure Rebars and de-coiled rods: ϕ 8 to ϕ 25 class B or C with fyk and k according to NDP or NCL of EN fuk = ftk = k fyk Temperature range (if applicable) -40 C to + 80 C (max. long term temperature +50 C and max. short term temperature +80 C) 4. Name, registered trade name or registered trade mark and contact address as required pursuant to Article 11(5): Hilti Corporation, Business Unit Anchors, 9494 Schaan, Fürstentum Liechtenstein 5. Where applicable, name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12(2): - 6. System or systems of assessment and verification of constancy of performance of the construction product as set out in Annex V: System 1 7. In case of the declaration of performance concerning a construction product covered by a harmonised standard - 8. In case of the declaration of performance concerning a construction product for which a European Technical Assessment has been issued: Technical Assessment Body: Deutsches Institut für Bautechnik (DIBt) European Technical Assessment: ETA-15/0297 ( ) DoP_en_01-01_ _HIT-HY_170_rebar.docx

30 European Assessment Document: EAD Certificate of Conformity: 1343-CPR-M500-13/ Declared performance: Essential characteristics Design method Performance Harmonized Technical Specification Minimum concrete cover ETA-15/0297 annex B3 Minimum anchorage lengths ETA-15/0297 annex C1 Design value of the EN ETA-15/0297, Annex C1 EAD ultimate bond ETA-15/0297 annex C1 stress Resistance to fire ETA-15/0297 annex C1 10. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 9. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. Signed for and on behalf of the manufacturer by: Raimund Zaggl Business Unit Head Business Unit Anchors Seppo Perämäki Head of Quality Business Unit Anchors Hilti Corporation Schaan, DoP_en_01-01_ _HIT-HY_170_rebar.docx

31 Table B1: Minimum concrete cover c 1) min of the post-installed rebar depending on drilling method and drilling tolerance Drilling method Bar diameter Minimum concrete cover cmin 1) [mm] [mm] Without drilling aid With drilling aid Hammer drilling ϕ < ,06 lv 2 ϕ ,02 lv 2 ϕ (HD) ϕ ,06 lv 2 ϕ ,02 lv 2 ϕ Compressed air ϕ < ,08 lv ,02 lv drilling (CA) ϕ ,08 lv 2 ϕ ,02 lv 2 ϕ Table B4: Parameters of drilling, cleaning and setting tools Elements Drill and clean Installation Hammer Compressed Extension Extension Brush Air nozzle Piston plug Rebar drilling air drilling for air for piston HIT-RB HIT-DL HIT-SZ (HD) (CA) nozzle plug Maximum embedment depth - size d0 [mm] d0 [mm] size size [-] size [-] lv,max [mm] ϕ 8 HIT-VL /1, HIT-DL ϕ /0, or ϕ HIT-DL 16 HIT-VL V10/ /1,0 ϕ ϕ HIT-DL 20 ϕ /0, or 25 ϕ 20 HIT-VL HIT-DL B 25 16/0,7 ϕ and/or 28 and/or 700 ϕ HIT-VL 32 HIT-VL 16 16/0,7 ϕ and/or 32 HIT-VL 16 1) Assemble extension HIT-VL 16/0,7 with coupler HIT-VL K for deeper boreholes. DoP_en_01-01_ _HIT-HY_170_rebar.docx

32 Table C1: Amplification factor α lb Concrete class Bar diameter C12/15 C16/20 C20/25 C25/30 C30/37 C35/45 C40/50 C45/55 C50/60 ϕ 8 to ϕ 25 1,0 Table C2: Design values of the ultimate bond resistance f bd 1) in N/mm² Concrete class Bar diameter C12/15 C16/20 C20/25 C25/30 C30/37 C35/45 C40/50 C45/55 C50/60 ϕ 8 to ϕ 12 1,6 2,0 2,3 2,7 3,0 3,4 3,7 3,7 3,7 ϕ 14 to ϕ 25 1,6 2,0 2,3 2,7 3,0 3,4 3,4 3,4 3,4 Table C3: Temperature reduction factor k fi(θ) DoP_en_01-01_ _HIT-HY_170_rebar.docx

Declaration of Performance No. DPGEB1006 v2.1

Declaration of Performance No. DPGEB1006 v2.1 G&B Fissaggi S.r.l. C.so Savona 22 10029 Villastellone (TO), Italia tel. +39 011 9619433 - fax +39 011 9619382 www.gebfissaggi.com - info@gebfissaggi.com p. 1/7 Declaration of No. DPGEB1006 v2.1 1. Unique

More information

Declaration of Performance

Declaration of Performance Expandet ESI Extreme Pro, EVL Extreme Pro (galvanized or stainless steel bonded anchor) Intended use or uses of the construction product according to ETAG 001 parts 1 and 5 Generic type Bonded anchor for

More information

DECLARATION OF PERFORMANCE

DECLARATION OF PERFORMANCE EN DECLARATION OF PERFORMANCE DoP No. Hilti HUS3 0672-CPD-0361 1. Unique identification code of the product-type: Hilti Screw Anchor HUS3 2. Type, batch or serial number as required pursuant to Article

More information

DECLARATION OF PERFORMANCE

DECLARATION OF PERFORMANCE EN DECLARATION OF PERFORMANCE DoP No. Hilti 0432-CPR-00242-02 1. Unique identification code of the product-type: Metal expansion anchor Hilti 2. Type, batch or serial number as required pursuant to Article

More information

HIT-HY 170 INJECTION MORTAR. Technical Datasheet Update: Apr-18

HIT-HY 170 INJECTION MORTAR. Technical Datasheet Update: Apr-18 HIT-HY 170 INJECTION MORTAR Technical Datasheet Update: Apr-18 HIT-HY 170 injection mortar Anchor design (ETAG 001) / Rods&Sleeves / Concrete Injection mortar system a) Applications only with HIT-V anchor

More information

HIT-HY 170 INJECTION MORTAR. Technical Datasheet Update: Dec-17

HIT-HY 170 INJECTION MORTAR. Technical Datasheet Update: Dec-17 HIT-HY 170 INJECTION MORTAR Technical Datasheet Update: Dec-17 HIT-HY 170 injection mortar Anchor design (ETAG 001) / Rods&Sleeves / Concrete Injection mortar system a) Applications only with HIT-V anchor

More information

Declaration of Performance

Declaration of Performance G&B Fissaggi S.r.l. C.so Savona 22 10029 Villastellone (TO), Italia tel. +39 011 9619433 - fax +39 011 9619382 www.gebfissaggi.com - info@gebfissaggi.com p. 1/12 Declaration of Performance No. DPGEB1009

More information

Declaration of Performance

Declaration of Performance Declaration of Performance 1343-CPR-M 530-11/01.15 1. Unique identification code of the product-type: Bonded injection type anchor Mungo MIT Tropical and MIT- VE Plus for use in non-cracked concrete 2.

More information

Declaration of Performance

Declaration of Performance Declaration of Performance 1343-CPR-M 530-7/01.15 1. Unique identification code of the product-type: Bonded injection type anchor Mungo MIT-SP/MIT-SPE Plus, MIT-SP Winter for use in non-cracked concrete

More information

English translation prepared by CSTB - Original version in French language

English translation prepared by CSTB - Original version in French language Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

Declaration of Performance No. DPGEB1018 v2

Declaration of Performance No. DPGEB1018 v2 G&B Fissaggi S.r.l. C.so Savona 22 10029 Villastellone (TO), Italia tel. +39 011 9619433 - fax +39 011 9619382 www.gebfissaggi.com - info@gebfissaggi.com p. 1/5 Declaration of No. DPGEB1018 v2 1. Unique

More information

ETA-11/0141 of 08/08/2016. European Technical Assessment. General Part. Technical Assessment Body issuing the. Instytut Techniki Budowlanej

ETA-11/0141 of 08/08/2016. European Technical Assessment. General Part. Technical Assessment Body issuing the. Instytut Techniki Budowlanej INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. Filtrowa 1 tel.: (+48 22) 825-04-71 (+48 22) 825-76-55 fax: (+48 22) 825-52-86 www.itb.pl European Technical Assessment of 08/08/2016 General Part (English

More information

European Technical Assessment. ETA-12/0398 of 29/12/2017. General Part. Instytut Techniki Budowlanej. Technical Assessment Body issuing the

European Technical Assessment. ETA-12/0398 of 29/12/2017. General Part. Instytut Techniki Budowlanej. Technical Assessment Body issuing the European Technical Assessment General Part of 29/12/2017 (English language translation the original version is in Polish language) Body issuing the European Trade name of the construction product Product

More information

HIT-ICE INJECTION MORTAR. Technical Datasheet Update: Jun-18

HIT-ICE INJECTION MORTAR. Technical Datasheet Update: Jun-18 HIT-ICE INJECTION MORTAR Technical Datasheet Update: Jun-18 HIT-ICE injection mortar Anchor design (ETAG 001) / Rods&Sleeves / Concrete Injection mortar system Hilti HIT-ICE 296 ml cartridge Anchor rod:

More information

Designated according to Article 29 of Regulation (EU) No 305/2011 and member of EOTA (European Organisation for Technical Assessment)

Designated according to Article 29 of Regulation (EU) No 305/2011 and member of EOTA (European Organisation for Technical Assessment) INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. Filtrowa 1 tel.: (+48 2 825-04-71 (+48 2 825-76-55 fax: (+48 2 825-52-86 www.itb.pl Designated according to Article 29 of Regulation (EU) No 305/2011

More information

ITW Construction Products Italy S.r.l. V.le Regione Veneto, PADOVA (PD) ITALIEN. V.le Regione Veneto, PADOVA (PD) ITALIEN

ITW Construction Products Italy S.r.l. V.le Regione Veneto, PADOVA (PD) ITALIEN. V.le Regione Veneto, PADOVA (PD) ITALIEN European Technical Assessment ETA-13/1068 of 28 February 2014 General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction product Product family to

More information

Hilti HIT-HY 270 mortar for masonry Ultimate performance hybrid mortar for all masonry materials

Hilti HIT-HY 270 mortar for masonry Ultimate performance hybrid mortar for all masonry materials HIT-HY 270 mortar for masonry Ultimate performance hybrid mortar for all masonry materials Injection mortar system HIT-HY 270 330 ml foil pack (also available as 500 ml foil pack) Anchor rods: -F -R -HCR

More information

Hilti HIT-HY 200 A (R) mortar with HIT-V rods

Hilti HIT-HY 200 A (R) mortar with HIT-V rods Hilti HIT-HY 200 A (R) mortar with HIT-V rods Injection mortar system Hilti HIT- HY 200-A 500 ml foil pack (also available as 330 ml foil pack) Hilti HIT- HY 200-R 500 ml foil pack (also available as 330

More information

DECLARATION OF PERFORMANCE

DECLARATION OF PERFORMANCE DECLARATION OF PERFORMANCE 1. Unique identification code of the product-type: MULTI-MONTI-plus (MMS-plus) 2. Type, batch or serial number or any other element allowing identification of the construction

More information

Intended uses of the construction product, in accordance with the applicable harmonized technical specification as foreseen by the manufacturer:

Intended uses of the construction product, in accordance with the applicable harmonized technical specification as foreseen by the manufacturer: DoP SM0BS00 page / 7 SM0BS00 Unique identification code of the product-type: TURBO SMART concrete screw Type or serial number or any other element allowing identification of the construction product as

More information

European Technical Assessment ETA-15/0288 of 17/06/2015

European Technical Assessment ETA-15/0288 of 17/06/2015 ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of

More information

European Technical Assessment ETA-14/0454 of 11/12/2014

European Technical Assessment ETA-14/0454 of 11/12/2014 ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of

More information

English translation prepared by CSTB - Original version in French language. Injection system Hilti HIT-RE 500 V3

English translation prepared by CSTB - Original version in French language. Injection system Hilti HIT-RE 500 V3 Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical Assessment Member

More information

Technical data No. 17/0001 of 25/04/2017

Technical data No. 17/0001 of 25/04/2017 Hilti Corporation Feldkircherstrasse 100 FL-9494 Schaan Principality of Liechtenstein www.hilti.group Technical data No. 17/0001 of 25/04/2017 General Part Trade name Injection system Hilti HIT-RE 500

More information

Page 9, issued on 03. February 2009 Threaded rod M8, M10, M12, M16, M20, M24, M27, M30 with washer and hexagon nut L df h h ef 0 tfix h min Reinforcing bar 8, 10, 12, 14, 16, 20, 25, 28, 32 acc. to Annex

More information

HIT-HY 270 INJECTION MORTAR. Technical Datasheet Update: Jul-18

HIT-HY 270 INJECTION MORTAR. Technical Datasheet Update: Jul-18 HIT-HY 270 INJECTION MORTAR Technical sheet Update: Jul-18 HIT-HY 270 injection mortar Anchor design (ETAG 029) / Rods&Sleeves / Masonry Injection mortar system HIT-HY 270 330 ml foil pack (also available

More information

HIT-RE 500 V3 INJECTION MORTAR. Technical Datasheet Update: Dec-17

HIT-RE 500 V3 INJECTION MORTAR. Technical Datasheet Update: Dec-17 HIT-RE 500 V3 INJECTION MORTAR Technical Datasheet Update: Dec-17 HIT-RE 500 V3 injection mortar Anchor design (ETAG 001) / Rods&Sleeves / Concrete Injection mortar system Foil pack: HIT-RE 500 V3 (available

More information

Permissible loads of a single anchor in cracked normal concrete (concrete tension zone) of strength class C20/25 ( B25) Permissible tensile load

Permissible loads of a single anchor in cracked normal concrete (concrete tension zone) of strength class C20/25 ( B25) Permissible tensile load Injection system FIS VL: Injection mortar FIS VL with Threaded rod FIS A zinc plated steel / stainless steel 1 loads of a single anchor in cracked normal concrete (concrete tension zone) of strength class

More information

English translation prepared by CSTB - Original version in French language. Injection system Hilti HIT-RE 500 V3

English translation prepared by CSTB - Original version in French language. Injection system Hilti HIT-RE 500 V3 Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical Assessment Member

More information

Declaration of Performance

Declaration of Performance Declaration of Performance KEM-UP + Vinylester Bonded anchor vinylester resin in cartridge via Trieste, 1 San Giovanni al Natisone (UD) Italy - ph. +39 0432 747911 www.friulsider.com - info@friulsider.com

More information

ETA-13/0584 of 24/09/2014. European Technical Assessment. General Part. Technical Assessment Body issuing the. Instytut Techniki Budowlanej

ETA-13/0584 of 24/09/2014. European Technical Assessment. General Part. Technical Assessment Body issuing the. Instytut Techniki Budowlanej Member of INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. Filtrowa 1 tel.: (+48 22) 825-04-71 (+48 22) 825-76-55 fax: (+48 22) 825-52-86 www.itb.pl www.eota.eu European Technical Assessment of 24/09/2014

More information

English translation prepared by CSTB - Original version in French language

English translation prepared by CSTB - Original version in French language Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

Hilti HIT-HY 170 mortar with HIT-V rod. Anchor Fastening Technology Manual. Hilti HIT-HY 170 with HIT-V HIS-(R)N 03 / /

Hilti HIT-HY 170 mortar with HIT-V rod. Anchor Fastening Technology Manual. Hilti HIT-HY 170 with HIT-V HIS-(R)N 03 / / Anchor Fastening Technology Manual Hilti HIT-HY 170 with HIT-V HIS-(R)N 1 Hilti HIT-HY 170 with HIT-V Injection mortar system Benefits Hilti HIT-HY 170 500 ml foil pack (also available as 330 ml foil pack)

More information

EKSPLOATACINIŲ SAVYBIŲ DEKLARACIJA

EKSPLOATACINIŲ SAVYBIŲ DEKLARACIJA Produkto tipo unikalus identifikavimo kodas: ESSVE Ankerinė masė ECM (ESSVE ECM Chemical Anchor) Naudojimo paskirtis (-ys): ESSVE ECM Ankerinė Mase skirtas montuoti stud sriegiu strypas arba Armatūra betone

More information

HVZ (HVU-TZ+HAS-TZ) adhesive anchor system Anchor design (ETAG 001) / Rods&Sleeves / Concrete

HVZ (HVU-TZ+HAS-TZ) adhesive anchor system Anchor design (ETAG 001) / Rods&Sleeves / Concrete HVZ (HVU-TZ+) adhesive anchor system Anchor design (ETAG 001) / Rods&Sleeves / Concrete Anchor version HVZ Mortar capsule Anchor rod: HAS-R-TZ HAS-HCR-TZ (M10-M20) Benefits - Suitable for cracked and noncracked

More information

English translation prepared by CSTB - Original version in French language. Injection System ZETACHEM EPX 30 / 41

English translation prepared by CSTB - Original version in French language. Injection System ZETACHEM EPX 30 / 41 Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

Anchor Fastening Technology Manual. HIT-HY 170 mortar with rebar. Hilti HIT-HY 170 mortar with rebar (as post-installed conn.

Anchor Fastening Technology Manual. HIT-HY 170 mortar with rebar. Hilti HIT-HY 170 mortar with rebar (as post-installed conn. Anchor Fastening Technology Manual Hilti HIT-HY 170 mortar with HIT-HY 170 mortar with rebar Version 2015-12 1 February 12, 2016 Hilti HIT-HY 170 mortar with rebar (as post-installed connection) Injection

More information

English translation prepared by CSTB - Original version in French language SPIT MULTI-MAX. SPIT SAS Route de Lyon Bourg-Les-Valence FRANCE

English translation prepared by CSTB - Original version in French language SPIT MULTI-MAX. SPIT SAS Route de Lyon Bourg-Les-Valence FRANCE Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

Type or serial number or any other element allowing identification of the construction product as

Type or serial number or any other element allowing identification of the construction product as DoP SMRPF001 (rev.1) page 1 / 5 SMRPF001 Unique identification code of the product-type: SMRPF Type or serial number or any other element allowing identification of the construction product as required

More information

Hilti HIT-CT 1 with HIT-V

Hilti HIT-CT 1 with HIT-V Hilti HIT-CT 1 Injection mortar system Benefits - Hilti Clean technology (clean- Tec) Hilti HIT-CT 1 330 ml foil pack (also available as 500 ml foil pack) Static mixer HIT-V(-F) rods rods rods - Environmentaly

More information

DÉCLARATION DE PERFORMANCES N Hilti HIT-CT 1 rebar_1343-cpr-m

DÉCLARATION DE PERFORMANCES N Hilti HIT-CT 1 rebar_1343-cpr-m FR DÉCLARATION DE PERFORMANCES N Hilti HIT-CT 1 rebar_1343-cpr-m500-29-07.14 1. Code d'identification unique du produit type : Système par injection Hilti HIT-CT 1 de scellement de fers d'armature 2. Usage(s)

More information

Designated according to Article 29 of Regulation (EU) No 305/2011 and member of EOTA (European Organisation for Technical Assessment)

Designated according to Article 29 of Regulation (EU) No 305/2011 and member of EOTA (European Organisation for Technical Assessment) INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. Filtrowa 1 tel.: (+48 22) 825-04-71 (+48 22) 825-76-55 fax: (+48 22) 825-52-86 www.itb.pl Designated according to Article 29 of Regulation (EU) No 305/2011

More information

Intended uses of the construction product, in accordance with the applicable harmonized technical specification as foreseen by the manufacturer:

Intended uses of the construction product, in accordance with the applicable harmonized technical specification as foreseen by the manufacturer: DoP SMRPT001 page 1 / 5 SMRPT001 Unique identification code of the product-type: SMRPT Type or serial number or any other element allowing identification of the construction product as required pursuant

More information

Hilti HIT-HY 270 mortar. Anchor Fastening. for masonry. Technology Manual. Hilti HIT-HY 270 Injection mortar 05 /

Hilti HIT-HY 270 mortar. Anchor Fastening. for masonry. Technology Manual. Hilti HIT-HY 270 Injection mortar 05 / Anchor Fastening Technology Manual HIT-HY 270 Injection mortar Version 2015-05 05 / 2015 1 Injection mortar system Benefits HIT-HY 270 330 ml foil pack (also available as 500 ml foil pack) Mixer rod HIT-IC

More information

English translation prepared by CSTB - Original version in French language. Tecfi S.p.A. SS Appia km 193 Pastorano (CE) 81050, Italia

English translation prepared by CSTB - Original version in French language. Tecfi S.p.A. SS Appia km 193 Pastorano (CE) 81050, Italia Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

HILTI HSC UNDERCUT ANCHOR. Technical Datasheet Update: Sep-18

HILTI HSC UNDERCUT ANCHOR. Technical Datasheet Update: Sep-18 HILTI HSC UNDERCUT ANCHOR Technical Datasheet Update: Sep-18 Du HSC få Undercut anchors Ultimate-performance undercut anchor for shallow embedment depth Anchor version R (M8-M12) R (M6-M12) Benefits -

More information

Sormat ITH-Pe PRODUCT DATA SHEET. ITH-Pe - POLYESTER BASED RESIN STYRENE FREE. Polyester based injection resin, styrene free. ITH 165 Pe art.

Sormat ITH-Pe PRODUCT DATA SHEET. ITH-Pe - POLYESTER BASED RESIN STYRENE FREE. Polyester based injection resin, styrene free. ITH 165 Pe art. ITH 165 Pe art. 72900 Application in noncracked concrete ITH 300 Pe art. 72940 ITH 410 Pe art. 72941 Content Page Product description 2 Properties and benefits 2 Sample applications 2 Applications and

More information

Type or serial number or any other element allowing identification of the construction product as

Type or serial number or any other element allowing identification of the construction product as DoP SMRPT001 page 1 / 5 SMRPT001 Unique identification code of the product-type: SMRPT Type or serial number or any other element allowing identification of the construction product as required pursuant

More information

English translation prepared by CSTB - Original version in French language. Injection system DeWalt PURE110-PRO

English translation prepared by CSTB - Original version in French language. Injection system DeWalt PURE110-PRO Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical Assessment

More information

English translation prepared by CSTB - Original version in French language. Simpson Strong-Tie ZAC. Les 4 chemins Sainte-Gemme-la-Plaine France

English translation prepared by CSTB - Original version in French language. Simpson Strong-Tie ZAC. Les 4 chemins Sainte-Gemme-la-Plaine France Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Website : www.cstb.fr www.eota.eu European Technical

More information

HUS-HR / HUS-CR Screw anchor

HUS-HR / HUS-CR Screw anchor HUS-HR / HUS-CR Screw anchor Anchor version Benefits HUS-HR (M8-M14) HUS-CR (M8-M14) - High productivity- less drilling and fewer operations than with conventional anchors - ETA approval for cracked and

More information

HIT-HY 200 INJECTION MORTAR. Technical Datasheet Update: Aug-18

HIT-HY 200 INJECTION MORTAR. Technical Datasheet Update: Aug-18 HIT-HY 200 INJECTION MORTAR Technical Datasheet Update: Aug-18 HIT-HY 200 injection mortar Anchor design (ETAG 001) / Rods&Sleeves / Concrete Injection mortar system Hilti HIT- HY 200-A 500 ml foil pack

More information

HSC UNDERCUT ANCHOR. Technical Datasheet Update: Jul-18

HSC UNDERCUT ANCHOR. Technical Datasheet Update: Jul-18 HSC UNDERCUT ANCHOR Technical Datasheet Update: Jul-18 Du HSC få Undercut anchors Ultimate-performance undercut anchor for shallow embedment depth Anchor version R (M8-M12) R (M6-M12) Benefits - The perfect

More information

HIT-HY 200-A/R INJECTION MORTAR. Technical Datasheet Update: Oct-18

HIT-HY 200-A/R INJECTION MORTAR. Technical Datasheet Update: Oct-18 HIT-HY 200-A/R INJECTION MORTAR Technical Datasheet Update: Oct-18 HIT-HY 200 injection mortar Anchor design (ETAG 001) / Rods&Sleeves / Concrete Injection mortar system Hilti HIT- HY 200-A 500 ml foil

More information

English translation prepared by CSTB - Original version in French language

English translation prepared by CSTB - Original version in French language Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

Injection System Batifix VIFIX V. BATIFIX Z.A. La Gravière FAREINS FRANCE. Plant France 1

Injection System Batifix VIFIX V. BATIFIX Z.A. La Gravière FAREINS FRANCE. Plant France 1 Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

Hilti HIT-RE 10 mortar Economical epoxy mortar for concrete

Hilti HIT-RE 10 mortar Economical epoxy mortar for concrete Hilti HIT-RE 10 mortar Economical epoxy mortar for concrete Injection mortar system Hilti HIT-RE 10 580 ml hard cartridge Benefits - Suitable for non-cracked concrete C20/25 to C50/60 - Suitable for dry

More information

Hilti HIT-HY 200-R 500 ml foil pack (also available as 330 ml foil pack) Static mixer

Hilti HIT-HY 200-R 500 ml foil pack (also available as 330 ml foil pack) Static mixer with HIT-V Hilti HIT-HY 200 with HIT-V Injection Mortar System Benefits Hilti HIT-HY 200-R 500 ml foil pack (also available as 330 ml foil pack) Static mixer HIT-V rods HIT-V (Zinc) HIT-V-F (Gal) HIT-V-R

More information

Anchor Fastening Technology Manual. HIT-HY 170 mortar with rebar (as anchor) Hilti HIT-HY 170 mortar with rebar (as anchor) Version

Anchor Fastening Technology Manual. HIT-HY 170 mortar with rebar (as anchor) Hilti HIT-HY 170 mortar with rebar (as anchor) Version Anchor Fastening Technology Manual Hilti HIT-HY 170 mortar with HIT-HY 170 mortar with rebar (as anchor) Version 2016-10 1 November 3, 2016 Hilti HIT-HY 170 mortar with Injection mortar system Benefits

More information

This Technical Assessment meets the testing requirements stipulated in Standards Australia Technical Specification: SA TS101:2015

This Technical Assessment meets the testing requirements stipulated in Standards Australia Technical Specification: SA TS101:2015 A founding member of AEFAC Anchor testing to TS101:2015 Appendix B performed by ramsetreid TM Concrete Structures Laboratory, an ISO 9001 Accredited Laboratory Report Number: TR16047 Fastener Technical

More information

HIT-HY 200 INJECTION MORTAR. Technical Datasheet Update: Dec-17

HIT-HY 200 INJECTION MORTAR. Technical Datasheet Update: Dec-17 HIT-HY 200 INJECTION MORTAR Technical Datasheet Update: Dec-17 HIT-HY 200 injection mortar Anchor design (ETAG 001) / Rods&Sleeves / Concrete Injection mortar system Hilti HIT- HY 200-A 500 ml foil pack

More information

Designated. according to. Article29 of. Regulation (EU) Nº 305/2011. English translation prepared by IETcc. Original version in Spanish language

Designated. according to. Article29 of. Regulation (EU) Nº 305/2011. English translation prepared by IETcc. Original version in Spanish language Member of Designated according to Article29 of www.eota.eu Regulation (EU) INSTITUTO DE CIENCIAS DE LA CONSTRUCCIÓN EDUARDO TORROJA C/ Serrano Galvache n. 4 28033 Madrid (Spain) Tel.: (34) 91 302 04 40

More information

SINGLE ANCHOR USE FOR NON-CRACKED CONCRETE

SINGLE ANCHOR USE FOR NON-CRACKED CONCRETE LA+ LAL+ PRODUCT DATA SHEET DROP IN ANCHORS SINGLE ANCHOR USE FOR NON-CRACKED CONCRETE www.sormat.com facebook.com/sormat youtube.com/sormatfixing 1 ETA-approved drop in anchors ideal for suspension systems

More information

European Technical Approval ETA-11/0344

European Technical Approval ETA-11/0344 ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC

More information

HIT-HY 200 INJECTION MORTAR. Technical Datasheet Update: Mar-18

HIT-HY 200 INJECTION MORTAR. Technical Datasheet Update: Mar-18 HIT-HY 200 INJECTION MORTAR Technical Datasheet Update: Mar-18 HIT-HY 200 injection mortar Anchor design (ETAG 001) / Rods&Sleeves / Concrete Injection mortar system Hilti HIT- HY 200-A 500 ml foil pack

More information

DoP N 15/0826 DIAGER EPOXY PURE. 2. Type, batch or Article 11(4): CODE F352650E F354700E ITEM EPOXY PURE EPOXY PURE

DoP N 15/0826 DIAGER EPOXY PURE. 2. Type, batch or Article 11(4): CODE F352650E F354700E ITEM EPOXY PURE EPOXY PURE DECLARATION OF PERFORMANCE According to Construction Product Regulation n 305/2011 DoP N 15/0826 1. Unique identification code of the producttype: DIAGER EPOXY PURE 2. Type, batch or serial number or any

More information

HSA Carbon steel with DIN 125 washer. HSA-R Stainless steel A4 with DIN 125 washer. HSA-R2 Stainless steel A2 with DIN 125 washer

HSA Carbon steel with DIN 125 washer. HSA-R Stainless steel A4 with DIN 125 washer. HSA-R2 Stainless steel A2 with DIN 125 washer Anchor version Benefits HSA Carbon steel with DIN 125 washer HSA-R Stainless steel A4 with DIN 125 washer HSA-R2 Stainless steel A2 with DIN 125 washer HSA-BW Carbon steel with DIN 9021 washer HSA-F Carbon

More information

Approvals / Certificates:

Approvals / Certificates: Approvals / Certificates: Product Description The TP E SD mortar is a 2-component reaction resin mortar based on a pure epoxy and will be delivered in an exclusive 2-C cartridge system. This high performance

More information

AC100-PRO. AC100-PRO Vinylester 160ML AC100-PRO Vinylester 300ML AC100-PRO Vinylester 360ML AC100-PRO Vinylester 410ML AC100-PRO 160ML AC100-PRO 300ML

AC100-PRO. AC100-PRO Vinylester 160ML AC100-PRO Vinylester 300ML AC100-PRO Vinylester 360ML AC100-PRO Vinylester 410ML AC100-PRO 160ML AC100-PRO 300ML Vinylester 160ML Vinylester 300ML Vinylester 360ML Vinylester 410ML 160ML 300ML 360ML 410ML Approvals and test reports POWERS TEST LABORATORY 0756-CPD-0236 EUROPEAN TECHNICAL APPROVAL ETA-08/0290 - ETAG

More information

PRODUCT DATA SHEET THROUGH BOLTS S-KA S-KAK S-KAH A4 S-KAH HCR S-KAR A2 HHA A2

PRODUCT DATA SHEET THROUGH BOLTS S-KA S-KAK S-KAH A4 S-KAH HCR S-KAR A2 HHA A2 S-KA S-KAK S-KAH A4 S-KAH HCR S-KAR A2 HHA A2 PRODUCT DATA SHEET THROUGH BOLTS www.sormat.com facebook.com/sormat youtube.com/sormatfixing SORMAT SORMAT PDS-S-KA-EN-2018-05-03 1 Premium-quality through

More information

DECLARATION OF PERFORMANCE No. HSL-3_B-1109-CPR-0002

DECLARATION OF PERFORMANCE No. HSL-3_B-1109-CPR-0002 EN DECLARATION OF PERFORMANCE No. HSL-3_B-1109-CPR-0002 1. Unique identification code of the product-type: Hilti HSL-3 2. Intended use/es: Product Metal anchors for use in concrete Intended use For fixing

More information

Internal dry conditions Static or quasi-static loads Seismic actions for Performance Category C1 and C2 Fire exposure

Internal dry conditions Static or quasi-static loads Seismic actions for Performance Category C1 and C2 Fire exposure DoP SMZAK001 page 1 / 6 rev01 SMZAK001 Unique identification code of the product-type: SMART S-ZAK Type or serial number or any other element allowing identification of the construction product as required

More information

HKD redundant FLUSH ANCHOR. Technical Datasheet Update: Mar-18

HKD redundant FLUSH ANCHOR. Technical Datasheet Update: Mar-18 HKD redundant FLUSH ANCHOR Technical Datasheet Update: Mar-18 HKD Flush anchor Everyday standard manual set flush anchor for redundant fastening applications Anchor version HKD (M6-M16) HKD-woL (M6-M16)

More information

PRODUCT DATA SHEET THROUGH BOLTS. facebook.com/sormat youtube.com/sormatfixing SORMAT Product data sheet 1217

PRODUCT DATA SHEET THROUGH BOLTS.   facebook.com/sormat youtube.com/sormatfixing SORMAT Product data sheet 1217 S-KA S-KAK S-KAH A4 S-KAH HCR S-KAR A2 S-HHA A2 PRODUCT DATA SHEET THROUGH BOLTS www.sormat.com facebook.com/sormat youtube.com/sormatfixing 1 Premium-quality through bolts for fixing in cracked and non-cracked

More information

LEISTUNGSERKLÄRUNG Nr. Hilti HIT-CT 1 Bewehrungsanschlüsse_1343-CPR-M

LEISTUNGSERKLÄRUNG Nr. Hilti HIT-CT 1 Bewehrungsanschlüsse_1343-CPR-M DE LEISTUNGSERKLÄRUNG Nr. Hilti HIT-CT 1 Bewehrungsanschlüsse_1343-CPR-M500-29-07.14 1. Eindeutiger Kenncode des Produkttyps: Injektionssystem Hilti HIT-CT 1 für Bewehrungsanschlüsse 2. Verwendungszweck(e):

More information

European Technical ETA-04/0023 Assessment of 17 October 2017 General Part

European Technical ETA-04/0023 Assessment of 17 October 2017 General Part European Technical Assessment ETA-04/0023 of 17 October 2017 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction

More information

English translation prepared by CSTB - Original version in French language

English translation prepared by CSTB - Original version in French language Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

HVU with HAS/HAS-E rod adhesive anchor system

HVU with HAS/HAS-E rod adhesive anchor system HVU with HAS/HAS-E rod HVU with HAS/HAS-E rod Mortar system Benefits Hilti HVU foil capsule HAS HAS-R HAS-HCR rod - suitable for non-cracked concrete C 20/25 to C 50/60 - high loading capacity - suitable

More information

System Components. Grades. General Information Installation Information

System Components. Grades. General Information Installation Information General Information SECTION CONTENTS AC100-PRO General Information Installation Information Vinylester Injection Adhesive Anchoring System Design Information ProDUCT DESCRIPTION The AC100-PRO is a two-component

More information

DECLARATION OF PERFORMANCE. DoP No CPD GB (Version 1)

DECLARATION OF PERFORMANCE. DoP No CPD GB (Version 1) DECLARATION OF PERFORMANCE DoP No. 0756-CPD-447 - GB (Version 1) 1. Unique identification code of the product-type: SPIT TAPCON-6 2. Type, batch or serial number or any other element allowing identification

More information

EJOT Through Bolts. Premium-quality through bolts for fixing in cracked and non-cracked concrete.

EJOT Through Bolts. Premium-quality through bolts for fixing in cracked and non-cracked concrete. EJOT Premium-quality through bolts for fixing in cracked and non-cracked concrete www.ejot.com Anchors and Instaation Technology Premium-quality through bolts for fixing in cracked and non-cracked concrete

More information

Anchor HSA Fastening. Technology Manual HSA. Stud anchor. Version /

Anchor HSA Fastening. Technology Manual HSA. Stud anchor. Version / Anchor HSA Fastening Stud anchor Technology Manual HSA Stud anchor Version 2015-09 09 / 2015 1 HSA Stud anchor Anchor version HSA Carbon steel with DIN 125 washe HSA-R Stainless steel A4 HSA-R2 Stainless

More information

HUS3-H 8 / 10 / 14 Carbon steel concrete screw with hexagonal head. HUS3-C 8 / 10 Carbon steel concrete screw with countersunk head

HUS3-H 8 / 10 / 14 Carbon steel concrete screw with hexagonal head. HUS3-C 8 / 10 Carbon steel concrete screw with countersunk head HUS3 Screw anchor Anchor version HUS3-H 8 / 10 / 14 Carbon steel concrete screw with hexagonal head HUS3-C 8 / 10 Carbon steel concrete screw with countersunk head HUS3-HF 10 / 14 Carbon steel concrete

More information

European Technical Approval ETA-08/0376

European Technical Approval ETA-08/0376 European Technical Approval English translation prepared by DIBt - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck

More information

Designated. according to. Article29 of. Regulation (EU) Nº 305/2011. English translation prepared by IETcc. Original version in Spanish language

Designated. according to. Article29 of. Regulation (EU) Nº 305/2011. English translation prepared by IETcc. Original version in Spanish language Member of Designated according to Article29 of www.eota.eu Regulation (EU) INSTITUTO DE CIENCIAS DE LA CONSTRUCCIÓN EDUARDO TORROJA C/ Serrano Galvache n. 4 28033 Madrid (Spain) Tel.: (34) 91 302 04 40

More information

HST3 Metal expansion anchor

HST3 Metal expansion anchor HST3 Anchor version Benefits HST3 Carbon steel HST3-R Stainless steel - highest resistance for reduced member thickness, short spacing and edge distances - increased undercut percentage in combination

More information

Declaration of Performance Number 1219-DPC-0071 According to Regulation EU No 305/2011

Declaration of Performance Number 1219-DPC-0071 According to Regulation EU No 305/2011 Item code: ZJE01; ZJE31; ZJE71; ZJE81 Manufacturer: Tecfi S.p.A. - S.S. Appia, km 193-81050 Pastorano (CE), Italy Table 1 - Intended use Generic type: Metal anchor for use in concrete, torque controlled

More information

Hilti-HY 110 available in 330ml and 500ml foil packs. Static mixer HIT M1. Rebar BSt 500 S

Hilti-HY 110 available in 330ml and 500ml foil packs. Static mixer HIT M1. Rebar BSt 500 S Hilti HIT-HY 110 Injection Mortar System Benefits Hilti-HY 110 available in 330ml and 500ml foil packs. Static mixer HIT M1 suitable for non-cracked concrete C 20/25 to C 50/60 suitable for dry and water

More information

European Technical Assessment ETA-14/0453 of 11/12/2014

European Technical Assessment ETA-14/0453 of 11/12/2014 ETA-Danmark A/S Göteborg Plads 1 DK-21590 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011

More information

HKD Push-in anchor, Single anchor application

HKD Push-in anchor, Single anchor application HKD Push-in anchor, Anchor version HKD Carbon steel with lip HKD-S(R) Carbon steel, stainless steel with lip (R) Carbon steel, stainless steel without lip Benefits - simple and well proven - approved,

More information

HKD Push-in anchor, Single anchor application

HKD Push-in anchor, Single anchor application HKD Push-in anchor, Anchor version HKD Carbon steel with lip HKD-S(R) Carbon steel, stainless steel with lip (R) Carbon steel, stainless steel without lip Benefits - simple and well proven - approved,

More information

ETA-13/0058 Assessment

ETA-13/0058 Assessment Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Member of www.eota.eu European Technical

More information

System Components. Grades. General Information. Installation Information Design Information Material Information Ordering Information

System Components. Grades. General Information. Installation Information Design Information Material Information Ordering Information General Information General Information PV5 PRO Polyester Injection Adhesive Anchoring System ProDUCT DESCRIPTION The PV5PRO is a twocomponent polyester adhesive anchoring system. The system includes injection

More information

HST-3 EXPANSION ANCHOR. Technical Datasheet Update: Apr-18

HST-3 EXPANSION ANCHOR. Technical Datasheet Update: Apr-18 HST-3 EXPANSION ANCHOR Technical Datasheet Update: Apr-18 HST3 Expansion anchor Ultimate-performance expansion anchor for cracked concrete and seismic Anchor version HST3 HST3-R (M8-M24) HST3-BW HST3-R-BW

More information

European Technical Assessment. ETA-13/0088 of 20/03/2018. Egzemplarz archiwalny. General Part. Instytut Techniki Budowlanej

European Technical Assessment. ETA-13/0088 of 20/03/2018. Egzemplarz archiwalny. General Part. Instytut Techniki Budowlanej INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. Filtrowa 1 tel.: (+48 22) 825-04-71 (+48 22) 825-76-55 fax: (+48 22) 825-52-86 www.itb.pl Designated according to Article 29 of Regulation (EU) No 305/2011

More information

English translation prepared by CSTB - Original version in French language ITW RED HEAD 700 HIGH GROVE BOULEVARD GLENDALE HEIGHTS, ILLINOIS 60139

English translation prepared by CSTB - Original version in French language ITW RED HEAD 700 HIGH GROVE BOULEVARD GLENDALE HEIGHTS, ILLINOIS 60139 Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Member of www.eota.eu European Technical

More information