Make Waves. Topo 3-Dimensional System
|
|
- Julian Russell
- 5 years ago
- Views:
Transcription
1 Make Waves Topo 3-Dimensional System
2 User s Guide Topo panels are offered in translucent and opaque to work with existing lighting and complement any color palette. Optional preengineered utility circles accommodate additional lighting and provide utility access. Pages Understand Your System 3 Overview Components Accessories Design Your System 9 Design Rules Design Tools Specify Your System 12 Application Guide Specifications For More Information Technical Service 00 USG.4YOU Web Site 1 TOPO 3-Dimensional System
3 Topo 3-Dimensional System System Profile The TOPO 3-Dimensional System is available in " total depth. System Components Infill Panels The 2 x 2 pre-formed polycarbonate panels fit easily into the narrow-profile DONN Brand TOPO Suspension System. The panels are installed in a series of four-panel modules to create rolling 3-dimensional ceiling topographies. The smooth-surfaced panels are available in translucent white and opaque white. DONN Brand TOPO Suspension System The narrow-profile (9/16 wide) DONN Brand TOPO Suspension System is offered in flat white to complement panel finishes. The extruded aluminum suspension system can also be custom-painted. It features an integral clip on each cross-tee end, providing plug-in, positive-lock insertion for quick and easy installation without tools. TOPO Edge Trim The TOPO 3-Dimensional System can be finished with 2-1/4 -high trim in flat white or custom colors. Utility Circles Panels can be ordered with optional utility circles to integrate independently supported lighting and utilities. The 4 diameter utility circles can be positioned either at the high or low points of suspension system intersections, or centered on specific panels. (See Design Rules, p. 9.) 2 TOPO 3-Dimensional System
4 System Overview Product Information Materials Panels: Pre-formed polycarbonate Suspension system: Extruded aluminum available in flat white or custom colors Edge trim system: Painted cold rolled steel Size and Weight Panels: 2 x 2 System weight: 0.5 lbs./sf. Finishes Panel Color Panel ight TOPO Suspension System Transmission Coordinating Colors Clear Translucent 94% Silver Satin White Opaque 0% Flat White System Profile TOPO System " 9'ceiling Assembly View from Below TOPO panel hanger wire TOPO edge trim utility circles (optional) TOPO Suspension System 3 TOPO 3-Dimensional System
5 System Components Infill Panels Field Panel CAD Block Isometric View from Below (or Standard Panel) Panel with Utility Circle Formed at igh Point E Panel with Utility Circle Formed at ow Point E Panel with Utility Circle Formed in Center with a 3/4 igh Upward Return eg C 3 /4" 4 TOPO 3-Dimensional System
6 DONN Brand TOPO Suspension System The narrow profile (9/16 wide) DONN Brand TOPO Suspension System is offered in flat white. The extruded aluminum suspension system can be custom painted. The system features an integral clip on each cross-tee end, providing plug-in, positive-lock insertion for quick and easy installation without tools. 1 1 /4" Grid Panel Profile igh ow 9 /16" Cross Tee 2 Cross Tee 4 Cross Tee (Up) 4 Cross Tee (Down) Main Tee Main Tee Main Tee Splice Plate 5 TOPO 3-Dimensional System
7 System Accessories Edge Trim TOPO System ceilings can be finished with optional 2-1/4 -high edge trim, laser cut to match each segment. The trim system consists of integral attachment clips, corner caps and fascia clips. Detail Utility Circles Optional 4 diameter panel utility circles can be positioned either at the high points or low points of the suspension system intersections, or centered on panels. (For more details, see Design Rules, p. 9.) 4 Diameter Utility Circle at Center of Panel 4 Diameter Utility Circle at igh Point with Cross Tee Attached 3 /4" Utility Circle Cross Tee for Utility Circle at ow Point Cross Tee for Utility Circle at igh Point Cross Tees 6 TOPO 3-Dimensional System
8 System Profiles The TOPO 3-Dimensional System is 5 inches from the top-most point to the bottom-most point. The system consists of pre-formed polycarbonate infill panels installed in a series of four-panel modules to create a rolling 3-dimensional ceiling topography. TOPO System TOPO System creates a smooth, gently rolling ceiling with clearly defined dimension and form. It is ideal for environments where subtle ceiling undulation is desired. Plan View Using TOPO CAD Blocks E E E E E E E E E E E E E E E E E E E E Elevation " 9'ceiling 7 TOPO 3-Dimensional System
9 Design Rules Following are basic design rules covering the selection of TOPO 3-Dimensional System panels and the positioning of utility circles within the ceiling system. ighting and Utilities Utility Circles The Topo 3-D System is not designed to carry ceiling utilities. All lighting and utilities must be independently supported. The 4 -diameter TOPO utility circles may be positioned in three locations: At the intersection of two down cross tees. At the intersection of two up cross tees. In the center of TOPO infill panels. Utility Circle ocations (Viewed from Above) ow Points igh Points TOPO 3-Dimensional System
10 Design Rules Utility Circle ocations (Viewed from Above) Panel Center Note: Utility circles on individual panels can be located only at panel centers. Adding Rows of Main Tees Additional rows of s may be specified to shift cross tee intersections as needed Shifting Cross Tee Intersections cross tee row cross tee rows cross tee rows cross tee rows 9 TOPO 3-Dimensional System
11 Restrictions Utility circles may not be placed: At the intersection of a and a cross tee. In the center of any tee. At more than one location on a single panel. At the perimeter of the TOPO assembly. Not Allowed intersection of and cross tee perimeter of TOPO assembly more than one location on a single panel center of a tee 10 TOPO 3-Dimensional System
12 Design Tools The TOPO 3-Dimensional System can be designed using three interactive design tools: TOPO CAD Blocks, the TOPO Online Designer or the USG Design Wizard. TOPO CAD Blocks TOPO DXF Blocks offers designers a simple, time-saving means for creating TOPO 3-Dimensional System designs in most CAD systems. The blocks, which can be downloaded for free from the Online Tools section of the USG web site ( are compatible with nearly all CAD systems. TOPO System E E C 11 TOPO 3-Dimensional System
13 Application Guide Specifications Section Dimensional Ceiling Systems Part 1: 1.1 A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 General Related Documents Specification Sections, apply to this Section. 1.2 A. This Section includes 3-dimensional ceiling panels and extruded aluminum suspension systems. Summary B. Related Sections include the following: 1. Division 9 Section Gypsum Board 2. Division 9 Section Acoustical Panel Ceilings 3. Division 15 Sections Mechanical 4. Division 16 Sections Electrical 1.3 A. Samples for Initial Selection: Manufacturer s color charts showing the full range of colors available for units. Submittals B. Samples for Verification: For each type of exposed finish required, prepared on Samples of size indicated below and of same thickness and material indicated for the Work Dimensional Ceiling Panels: Set of Samples of each type, finish, and color. Exposed Suspension System Members, Moldings, and Trim: Set of 12 inch long Samples of each type, finish, and color. C. Qualification Data: For firms and persons specified in Quality Assurance Article to demonstrate their capabilities and experience. Include lists of completed projects with project names and addresses, names and addresses of architects and owners, and other information specified. 1.4 A. Installer Qualifications: An experienced installer who has completed 3-dimensional ceiling systems similar in Quality Assurance material, design, and extent to those indicated for this Project and whose work has resulted in construction with a record of successful in-service performance. B. Source imitations for 3-Dimensional Ceiling Systems: Obtain 3-dimensional ceiling systems from one source with resources to provide products of consistent quality in appearance and physical properties. C. Preinstallation Conference: Conduct conference at Project site to comply with requirements in Division 1 Section Project Meetings. 1.5 A. Environmental imitations: Do not install 3-dimensional ceiling systems until spaces are enclosed and weather Project Conditions proof, wet-work in spaces is complete and dry, work above ceilings is complete, and ambient temperature and humidity conditions are maintained at the levels indicated for Project when occupied for its intended use. 1.6 A. Furnish extra materials described below that match products installed and that are packaged with protective Extra materials covering for storage and identified with labels describing contents Dimensional Ceiling Panels: Furnish quantity of full-size units equal to [%] percent of amount installed. 12 TOPO 3-Dimensional System
14 Part 2: 2.1 A. Products: Subject to compliance with requirements, provide one of the products indicated for each designation Products Products and in the 3-Dimensional Ceiling System Schedule at the end of Part 3. Manufacturers 2.2 A. Panel Type: ay-in pan. 3-Dimensional B. Panel Material: pre-formed polycarbonate. Ceiling Panels C. Panel Thickness: Not less than inches. D. Panel Size: 24 by 24 inches. E. Panel Finish: Smooth-surfaced to match color indicated by product designation. F. 3-Dimensional Ceiling System Characteristics: Comply with requirements indicated in the 3-Dimensional Ceiling System Schedule at the end of Part A. Metal Suspension System Standard: Provide ceiling manufacturer s standard metal suspension systems of Metal Suspension materials and finishes indicated that comply with applicable ASTM C 635 requirements. Systems B. Attachment Devices: Size for five times the design load indicated in ASTM C 635, Table 1, Direct ung, unless otherwise indicated. 1. Cast-in-Place and Postinstalled Anchors in Concrete: Anchors of type and material indicated below, with holes or loops for attaching hangers of type indicated and with capability to sustain, without failure, a load equal to five times that imposed by ceiling construction, as determined by testing per ASTM E 4, conducted by a qualified testing agency. a. Type: Cast-in-place anchors. b. Type: Postinstalled expansion anchors. c. Corrosion Protection: Carbon-steel components zinc plated to comply with ASTM B 633, Class Fe/Zn 5 (0.005 mm) for Class SC service condition (mild). 2. Postinstalled Powder-Actuated Fasteners in Concrete: Fastener system of type suitable for application indicated, fabricated from corrosion-resistant materials, with clips or other accessory devices for attaching hangers of type indicated, and with capability to sustain, without failure, a load equal to 10 times that imposed by ceiling construction, as determined by testing per ASTM E 1190, conducted by a qualified testing agency. C. Wire angers, Braces, and Ties: Provide wires complying with the following requirements: 1. Zinc-Coated Carbon-Steel Wire: [ASTM A 641] [ASTM A 641M], Class 1 zinc coating, soft temper. 2. Size: Select wire diameter so its stress at three times hanger design load (ASTM C 635, Table 1, Direct ung) will be less than the yield stress of wire, but provide not less than 12 gauge wire. D. anger Rods: Mild steel, zinc coated or protected with rust-inhibitive paint. 2.4 A. Narrow-Face, Single-Web, Extruded-Aluminum Suspension System: Main and cross runners formed from Extruded-Aluminum extruded aluminum to produce structural members with 9/16-inch- wide faces. Suspension Systems 1. Face Design: Flat, flush. 2. Face Finish: Painted to match panel finish. 13 TOPO 3-Dimensional System
15 Part 3: 3.1 A. Examine substrates and structural framing to which 3-dimensional ceiling systems attach or abut, with Installer Execution Examination present, for compliance with requirements specified in this and other sections that affect ceiling installation and anchorage, and other conditions affecting performance of 3-dimensional ceiling systems. 1. Proceed with installation only after unsatisfactory conditions have been corrected. 3.2 A. Coordination: Furnish layouts for cast-in-place anchors, clips, and other ceiling anchors whose installation is Preparation specified in other Sections. B. Measure each ceiling area and establish layout of 3-dimensional ceiling systems. Comply with layout shown on reflected ceiling plans. 3.3 A. General: Install 3-dimensional ceiling systems to comply with publications referenced below per manufacturer s Installation written instructions: 1. Standard for Ceiling Suspension System Installations: Comply with ASTM C 636. B. Suspend 3-dimensional ceiling system hangers from building s structural members and as follows: 1. Install hangers plumb and free from contact with insulation or other objects within ceiling plenum that are not part of supporting structural or 3-dimensional ceiling system. 2. Where width of ducts and other construction within ceiling plenum produces hanger spacings that interfere with the location of hangers at spacings required to support decorative channel members, install supplemental suspension members and hangers in form of trapezes or equivalent devices. 3. Secure hangers to structure, including intermediate framing members, by attaching to inserts, eye screws, or other devices that are secure and appropriate for structure to which hangers are attached and for type of hanger involved. Install hangers in a manner that will not cause them to deteriorate or fail due to age, corrosion, or elevated temperatures. 4. Do not support 3-dimensional ceiling system directly from permanent metal forms or floor deck. Fasten hangers to powder-actuated fasteners, or drilled-in anchors that extend through forms into concrete. 5. Do not attach hangers to steel deck tabs. 6. Do not attach hangers to steel roof deck. Attach hangers to structural members. 7. Space hangers not more than 4 inches o.c. along each member supported directly from hangers, unless otherwise indicated. 3.4 Clean, exposed surfaces of 3-dimensional ceiling systems. Comply with manufacturer s written instructions for Cleaning cleaning and touchup of minor finish damage. Remove and replace 3-dimensional ceiling system components that cannot be successfully cleaned and repaired to permanently eliminate evidence of damage, including dented and deformed channels. 3.5 A. 3-Dimensional Ceiling System 3DSC-[#]: Where ceilings of this designation are indicated, provide components 3-Dimensional Ceiling complying with the following: System Schedule 1. Products: TOPO 3-Dimensional Accent System and DONN Brand TOPO Suspension System by USG Interiors, Inc. 2. TOPO 3-Dimensional Accent Infill Panels: with panel profile [Ceiling Configuration], [Access Circle Cut at igh Point], [Access Circle Cut at ow Point], [Access Circle Centered on Panel], available in [Translucent White], [Opaque White]. 3. DONN Brand TOPO Suspension System: Extruded-aluminum, narrow profile, 9/16-inch- wide face, offered in coordinated colors to match the panel finish. 4. Cross Tee: [24-inches], [4-inches Up], [4-inches-Down]. 5. Main Tee: 96-inches. 6. Main Tee Splice Plate. 7. Panel old Down Clip: Quick-release clip on cross-tee ends.. Edge Trim Pieces: 2-1/4- inches high, painted to match panel finish. 14 TOPO 3-Dimensional System
16 Technical Service 00 USG.4YOU Web Site Samples/iterature Samples/iterature Samples/iterature/Fax Customer Service Note All products described here may not be available in all geographic markets. Consult your local sales office or representative for information. Trademarks The following trademarks used herein are owned by USG Interiors, Inc.: DONN, TOPO, USG. AUTOCAD is a trademark of AutoDesk, Inc. Patents Patents pending. Notice We shall not be liable for incidental and consequential damages, directly or indirectly sustained, nor for any loss caused by application of these goods not in accordance with current printed instructions or for other than the intended use. Our liability is expressly limited to replacement of defective goods. Any claim shall be deemed waived unless made in writing to us within thirty (30) days from date it was or reasonably should have been discovered. SAFETY FIRST! Follow good safety and industrial hygiene practices during handling and installation of all products and systems. Take necessary precautions and wear the appro - priate personal protective equipment as needed. Read material safety data sheets and related literature on products before specification and/or installation. Manufactured by USG Interiors, Inc. 550 West Adams Chicago, I IC43/rev , USG Interiors, Inc. Printed in U.S.A.
SECTION ACOUSTICAL PANEL CEILINGS
SECTION 095113 ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationPRESTON HEALTH SERVICES ARCHITECT'S NO. 2700
SECTION 09 5113 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationBanyan Air Service November 18, 2011 AVE Aviation and Commerce Center Building 1 Miami, FL
SECTION 09511 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationA. This Section includes acoustical panel ceilings installed with exposed suspension systems.
SECTION 09511 ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification
More informationConstruction Standards PAGE
Construction Standards PAGE 095113-1 SECTION 095113 - PART 1 - GENERAL 1.1 M.S.U. ISSUES 1. It the intent of MSU that all joint sealants used on its projects will comply with LEED NC 3 Credit Requirements
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 095113 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationA. Product Data: Submit manufacturer's descriptive literature, and recommendations and instructions for installation.
SECTION 09512 - ACOUSTICAL TILECEILINGS (ACT-01 and ACT-02) PART 1 - GENERAL 1.01 SUMMARY A. Section includes ceilings consisting of acoustical panels and exposed suspension systems. This ceiling system
More informationStore No MAY 13 Addendum No. 1 SECTION ACOUSTICAL PANEL CEILINGS
SECTION 09511 ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 095113 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. AC: Articulation
More informationLINEAR METAL CEILINGS Section
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
More informationStudent Services & Classroom Addition
SECTION 095133 - ACOUSTICAL METAL PAN CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 092216 - NON-STRUCTURAL METAL FRAMING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION ACOUSTICAL PANEL CEILINGS
SECTION 09511 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 095423 - LINEAR METAL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationA. ASTM C635, Standard Specifications for Metal Suspension Systems. B. ASTM C636, Recommended Practice for Installation of Metal Suspension System
SECTION 09510 / 09 51 00 USG TRUE WOOD LAY IN AND ACCESSIBLE REVEAL Product Specification WOOD CEILING PANELS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract,
More information1. Acoustical panels. 2. Exposed suspension systems for ceilings. 3. Wire hangers, fasteners, main runners, cross tees, and wall angle moldings.
SECTION 095113 - ACOUSTICAL PANEL WALLS & CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION LINEAR METAL CEILINGS
SECTION 09 5423 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification Sections, apply
More informationSECTION ACOUSTICAL PANEL CEILINGS. A. Section includes acoustical panels and exposed suspension systems for ceilings.
SECTION 09 51 13 ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 SUMMARY A. Section includes acoustical panels and exposed suspension systems for ceilings. 1.2 SUBMITTALS A. Product Data: For each type
More informationLOWER MACUNGIE TOWNSHIP COMMUNITY CENTER ADDITIONS AND RENOVATIONS
0 0 0 SECTION 0. - ACOUSTICAL PANEL CEILINGS PART - GENERAL. SUMMARY A. This Section includes the following work:. Acoustical panels and exposed suspension systems for ceilings.. Patching of existing acoustical
More informationInstallation Guide December 2012
Guide December 2012 Guide Description USG Compositions are decorative ceiling clouds offered in convenient, ready-to-assemble kits. Compositions allow you to create a custom look, accentuate an area or
More informationDIVISION 5 METALS SECTION COLD-FORMED METAL FRAMING
DIVISION 5 METALS SECTION 05 40 00 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationOCALA INTERNATIONAL AIRPORT MBI PN: GENERAL AVIATION TERMINAL JANUARY 16, 2018 ADDENDUM-ISSUE
SECTION 09511 ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationA. Product Data: For each type of product specified.
SECTION 09260 - GYPSUM BOARD ASSEMBLIES PART 1 - GENERAL.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 092216 - COLD FORMED STEEL FRAMING - NON-STRUCTURAL (CFSF-NS) PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 ACTION
More informationSECTION NON-STRUCTURAL METAL FRAMING
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 22 16 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable
More informationA. This Section includes ceilings consisting of acoustical panels and exposed suspension systems.
SECTION 09 51 13 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationSECTION ACOUSTICAL PANEL CEILINGS
SECTION 09 5113 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to
More information1. Non-load-bearing steel framing systems for interior gypsum board assemblies. 2. Suspension systems for interior gypsum ceilings and soffits.
SECTION 09 2216 - PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Non-load-bearing steel framing systems for interior gypsum board assemblies. 2. Suspension systems for interior gypsum ceilings and
More informationSoar to New Heights. Curvatura. 3-Dimensional System
Soar to New Heights Curvatura 3-Dimensional System Offices Retail Entertainment High-bay Areas The Curvatura 3-D System gives you the freedom to create dramatic three-dimensional curved designs that combine
More informationSubmittal Review A
Submittal Review TO: Pavilion Construction DATE: 07.20.2015 JOB NO.: 1484P 4700 SW Macadam Ave Suite 200 ATTENTION: Riley Tobin Portland, OR 97239 RE: BSD Sunset High School Concession Stand/Interior Renovations
More informationTHIS SECTION IS BASED ON ROCKFON S CURVGRID ONE-DIRECTIONAL CURVED METAL CEILING PANELS.
PAGE 1 THIS SECTION IS BASED ON ROCKFON S CURVGRID ONE-DIRECTIONAL CURVED METAL CEILING PANELS. Rockfon CurvGrid One-Directional Curved Metal Ceiling Panels are meant for interior applications, specifications
More informationSECTION ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL
SECTION 09511 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.01 DESCRIPTION: A. Work under this section is subject to requirements of the Contract Documents including the General Conditions and Supplementary
More informationA. ASTM C635, Standard Specifications for Metal Suspension Systems. B. ASTM C636, Recommended Practice for Installation of Metal Suspension System
SECTION 09510 / 09 51 00 USG TRUE WOOD LINEAR PANELS Product Specification WOOD CEILING PANELS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General
More informationReferences in blue are general indicators to the specifier. If not used it can be deleted, but may be needed in the future.
General spec. notes: References in blue are general indicators to the specifier. If not used it can be deleted, but may be needed in the future. SECTION 095133 / 09 51 33 PANZ Metal Ceiling Panels and
More informationNortrax Section David Manchester Road, Ottawa NON-STRUCTURAL METAL FRAMING 16 May 2014 Page 1
16 May 2014 Page 1 PART 1 GENERAL 1.1 DESCRIPTION This section specifies steel studs wall systems, shaft wall systems, ceiling or soffit suspended or furred framing, wall furring, fasteners, and accessories
More informationSECTION ACOUSTICAL CEILINGS
SECTION 09511 ACOUSTICAL CEILINGS PART 1 GENERAL 1.01 SECTION INCLUDES A. Acoustical ceiling panels. B. Exposed grid suspension system. C. Wire hangers, fasteners, main runners, cross tees, and wall angle
More informationArticulated Ceiling Planes. Geometrix. Metal Ceiling Panels
Articulated Ceiling Planes Geometrix Metal Ceiling Panels An entirely new perspective on metal ceilings 3-D Form GEOMETRIX Metal Ceiling Panels enable you to add new 3-dimensional form to: Retail and hospitality
More informationSoundmaster & Modernfold TECHNICAL DATA
This specification along with product information and model details can be downloaded from www.modernfold.com SPECIFICATION - SECTION 08 35 13 ACCORDION FOLDING DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS
More informationSECTION NON-STRUCTURAL METAL FRAMING
SECTION 09 22 16 PART 1 - GENERAL 1.1 DESCRIPTION A. This section specifies steel studs wall systems, shaft wall systems, ceiling or soffit suspended or furred framing, wall furring, fasteners, and accessories
More informationPLANK AND LARGE PANEL STABILIZER BARS APPLICATION GUIDE
USG Ceiling Solutions PLANK AND LARGE PANEL STABILIZER BARS APPLICATION GUIDE PLANK AND LARGE PANEL CEILING SYSTEMS Market demands for plank and large panel ceiling systems such as the USG Ceiling Systems
More informationUSG Ceiling Solutions USG PARALINE BAFFLES LINEAR METAL CEILING SYSTEM SYSTEM GUIDE
USG Ceiling Solutions USG PARALINE BAFFLES LINEAR METAL CEILING SYSTEM SYSTEM GUIDE USG PARALINE BAFFLES LINEAR METAL CEILING SYSTEM SYSTEM GUIDE USG Paraline Baffles is a flexible and customizable linear
More informationPlank and Large Panel Stabilizer Bars
Technical Document Plank and Large Panel Stabilizer Bars Application Guide Plank and Large Panel Ceiling Systems Market demands for plank and large panel ceilings systems such as the USG Logix Integrated
More informationSECTION PRE-ENGINEERED COLD-FORMED METAL ROOF AND FLOOR TRUSSES
SECTION 05440- PRE-ENGINEERED COLD-FORMED METAL ROOF AND FLOOR TRUSSES PART 1 GENERAL 1.01 SUMMARY A. Section includes pre-engineered, pre-fabricated cold formed steel framing elements. Work includes:
More information1. Seismic Loads: Reference structural drawings.
SECTION 102213 ~WIRE MESH PARTITIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general prov1s1ons of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION (09512) - ACOUSTICAL TILE CEILINGS
SECTION 09 51 23 (09512) - ACOUSTICAL TILE CEILINGS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Suspended Metal Grid Systems Complete With Wall Trim 2. Suspended Fiberglass Grid Systems Complete
More informationSECTION DRYWALL GRID LINEAR LIGHTING INTEGRATION
SECTION 09 22 26 DRYWALL GRID LINEAR LIGHTING INTEGRATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS Drawings and general conditions of Contract, including General and Supplementary Conditions and Divisions-1
More informationSECTION ACOUSTICAL CEILINGS (CEMENTITIOUS WOOD FIBER CEILINGS)
Tectum Inc. 105 South Sixth Street Newark, OH 43055 Phone: (888) 977-9691 Phone: (740) 345-9691 Fax: (800) 832-8869 E-mail: info@tectum.com www.tectum.com This MANU-SPEC utilizes the Construction Specifications
More informationArchitectural Wall Products Guide Specifications
Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 Architectural Wall Products Guide Specifications FORMED METAL WALL PANELS This Guide Specification is
More information1. Interior gypsum wallboard. 2. Exterior gypsum board panels for ceilings and soffits. 3. Tile backing panels.
SECTION 09260 - GYPSUM BOARD ASSEMBLIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationProduct Specification
General Specification Notes: SECTION 09210 / 09 21 00\ Finish Coat Plasters References in blue are general indicators to the specifier. References in red relate to fire-rated assemblies and/or code related
More informationTHIS SECTION IS BASED ON ROCKFON S PLANOSTILE D LAY-IN METAL CEILING PANELS.
PAGE 1 THIS SECTION IS BASED ON ROCKFON S PLANOSTILE D LAY-IN METAL CEILING PANELS. Though Rockfon Planostile D Lay-In Metal Ceiling Panels are meant for interior and exterior applications, Specifications
More informationEDGEWATER, FLORIDA JUNE 14, 2010
SECTION 09 2116 - NON-LOAD-BEARING STEEL FRAMING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1
More information1. This addendum contains the specifications for Acoustical Ceilings: public areas Lobby, Breakfast Room, etc. and not used on all doors.
ADDENDUM NO. 4 PROJECT NAME: GENERAL CONTRACTOR: ADDRESS: Holiday Inn Express - York NGC Group Inc. 3830 South 6 th Street Lincoln, NE 68502 DATE OF ISSUANCE: May 10, 2013 DATE OF BID OPENING: Tuesday,
More informationUSG Ceiling Solutions SPECIALTY CEILING SYSTEMS. USG Celebration Canopies INSTALLATION GUIDE
USG Ceiling Solutions SPECIALTY CEILING SYSTEMS USG Celebration Canopies INSTALLATION GUIDE Cover photo: Computer-generated image USG Corporation, 2016 Guide DESCRIPTION USG Celebration Canopies are decorative
More informationSECTION COLD-FORMED METAL TRUSSES
SECTION 054400 COLD-FORMED METAL TRUSSES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationTHIS SECTION IS BASED ON ROCKFON S TRADITIONS METAL CEILING PANELS.
PAGE 1 THIS SECTION IS BASED ON ROCKFON S TRADITIONS METAL CEILING PANELS. Rockfon Traditions Metal Ceiling Panels are meant for interior applications, specifications as shown here pertain to interior
More informationUniSpec II - Store Planning
UniSpec II - Store Planning 072613 SECTION 09511 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Suspended metal grid ceiling system. 2. Acoustical panels. 3. Perimeter
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 092650 - GYPSUM BOARD SHAFT WALL ASSEMBLIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION AXIOM INDIRECT FIELD LIGHT COVE PERIMETER SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 09 51 13 AXIOM INDIRECT FIELD LIGHT COVE PERIMETER SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENTS Drawings and general conditions of Contract, including General and Supplementary Conditions and
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 102239 - FOLDING PANEL PARTITIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSIMEILINGS TORSION SPRING CEILING SYSTEM SPECIFICATION
TORSION SPRING CEILING SYSTEM SPECIFICATION NOTICE: Consult your local Sound Concepts representative or contact Sound Concepts at 204.783.6297 before specifying any optional or custom element as shape,
More informationSECTION COMPOSITE CORE ACOUSTICAL PANEL CEILINGS. Sound-Rite Inc. #9, rd Avenue NE Calgary, AB T2A 7P3
SECTION 09510 COMPOSITE CORE ACOUSTICAL PANEL CEILINGS Sound-Rite Inc. #9, 2821 3rd Avenue NE Calgary, AB T2A 7P3 Tel 403-296-0505 Fax 403-296-0511 Email info@sound-rite.com Web www.sound-rite.com Techstyle
More information1.1 RELATED DOCUMENTS
Desert Academy Phase 2B Mathey and Associates Specification - Section 08 35 13 Accordion Folding Doors PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract including
More informationSection PANEL SIGNAGE
Section 10 14 23 PANEL SIGNAGE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including FDOT DIVISION I GENERAL REQUIREMENTS & COVENANTS Specification Sections,
More informationStudent Services & Classroom Addition
SECTION 055113 - METAL PAN STAIRS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION AWNINGS
SECTION 10 73 13 AWNINGS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Fixed metal awnings. 1.2 DEFINITIONS A. Awning: An architectural projection that provides weather protection,
More informationSECTION NON--STRUCTURAL METAL FRAMING
The Collective Voice of America s Steel Framing Industry The Steel Framing Industry Association (SFIA) is dedicated to expanding the market for cold-formed steel in construction through programs and initiatives
More informationSECTION ORCHESTRA PIT FILLER
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Orchestra pit filler. 1.2 REFERENCES SECTION 11 61 00 ORCHESTRA PIT FILLER A. American Hardboard Association (AHA): 1. AHA A135.4-95: Basic Hardboard. B. American
More informationSECTION GYPSUM BOARD PART 1 - GENERAL
SECTION 09250 - GYPSUM BOARD PART 1 - GENERAL 1.01 DESCRIPTION: A. Work under this section is subject to requirements of the Contract Documents including the General Conditions and Supplementary Conditions
More informationSECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 [08 33 13] COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Metal Counter
More informationMETALWorkS. RH200 Custom Hook-on Panels. General Installation Instructions. Ceiling 1.0 GENERAL Site Conditions Product Description
Ceiling Systems Between us, ideas become reality METALWorkS General Installation Instructions RH200 Custom Hook-on Panels 1.0 GENERAL 1.1. Product Description RH200 system is a downward accessible, metal
More informationDIMENSIONAL LETTER SIGNAGE
SECTION - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this
More informationTHIS SECTION IS BASED ON ROCKFON S SPANAIR HOOKON METAL CEILING PLANKS.
PAGE 1 THIS SECTION IS BASED ON ROCKFON S SPANAIR HOOKON METAL CEILING PLANKS. Rockfon SpanAir HookOn Metal Ceiling Planks are meant for interior applications, specifications as shown here pertain to interior
More informationSECTION LINEAR METAL CEILINGS
PART 1 - GENERAL 1.1 DESCRIPTION: A. This Section Includes: SECTION 09 54 23 LINEAR METAL CEILINGS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. Also delete any other item or
More informationSECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More information1. Include plans, elevations, sections, details, and attachments to other work.
SECTION 102213- PART 1 -GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to
More informationProject No: Pakenham Branch Library, Pakenham, Ontario Section DECEMBER, 2016 Page 1 of 6
DECEMBER, 2016 Page 1 of 6 1 GENERAL 1.01 RELATED SECTIONS.1 Section 01 33 00 - Submittal Procedures..2 Section 07 21 16 - Batt and Blanket Insulation..3 Section 07 92 10 - Sealants..4 Section 09 91 00
More informationArchitectural Roof Products Guide Specifications
Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 Architectural Roof Products Guide Specifications FORMED METAL ROOF AND WALL PANELS This Guide Specification
More informationSECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection
SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION
More informationSECTION STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 08110 - STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General, Supplementary, and Special Conditions and Division 1 Specification
More informationArchitectural Roof Products Guide Specifications
Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 Architectural Roof Products Guide Specifications FORMED METAL ROOF AND WALL PANELS This Guide Specification
More informationFS300 (1,500 lb) Specifications For HPL Covered Panels On Bolted Stringer System
FS300 (1,500 lb) Specifications For HPL Covered Panels On Bolted Stringer System NOTE: These specifications conform to CSI MasterFormat 2004/2005 Edition, AIA MasterSpec Section 096900 and to CSI MasterFormat
More informationSeismic Technical Guide
Technical Document Seismic Technical Guide Specialty and Decorative Ceilings Code Requirements See last page for Seismic Code Reference Standards. The International Building Code (IBC) defines the requirement
More informationTrex Commercial Products page Metal Railing
SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Classic Railings (Picket). B. GridGuard Railings (Mesh). C. Post Rail (Glass). D. Tensiline Railings (Cable). E. Track Rail (Glass).
More informationSECTION COLD-FORMED METAL FRAMING
SECTION 05 40 00 COLD-FORMED METAL FRAMING SPEC WRITER NOTE: Delete between //---// if not applicable to project. Also delete any other item or paragraph not applicable in the section and renumber the
More informationSECTION CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS [OR WOOD] PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationACOUSTI-CLEAR AUTOMATIC SERIES TECHNICAL DATA
Paired panel system Acoustically rated glass wall system Automatic seal system Hinged together in groups of two, facilitating quick, easy setup Each panel is supported by a single carrier Ideal for straight-line
More informationConstruction Standards PAGE
Construction Standards PAGE 092613-1 SECTION 092613 - PART 1 - GENERAL 1.1 M.S.U. ISSUES A. It is the intent of MSU that all gypsum veneer plaster used on its projects will comply with LEED NC 3 Credit
More informationGeometrik Manufacturing Inc.
PRODUCT: GEOSQUARE WOOD TILES Page 1 PART I GENERAL 1.1 SECTION INCLUDES 1. GeoSquare wood [acoustical] ceiling tiles. 2. Coordination with other trades that have parts attached to, penetrate through or
More informationSECTION EXTERIOR METAL WALL PANELS SERIES PF
SECTION 07 42 13 EXTERIOR METAL WALL PANELS SERIES PF PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Extent of Wall Panels System is shown on drawings and schedules B. Drawings and general provisions of the Contract
More informationONE SCHOOL STREET SEPTEMBER 18, 2008 GOWANDA, NEW YORK ARCH PROJECT NO
SECTION 09265 - GYPSUM BOARD SHAFT-WALL ASSEMBLIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationDIVISION 10 SPECIALTIES SECTION METAL LOCKERS
DIVISION 10 SPECIALTIES SECTION 10 51 13 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION HANDRAILS AND RAILINGS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES Display hidden notes to specifier. (Don't know how? Click Here) A. Classic Railings (Picket). B. GridGuard Railings (Mesh). C. Post
More informationDivision 8 Section "Flush Wood Doors" for louvers in wood doors. Division 15 Sections for louvers that are a part of mechanical equipment.
0 0 0 0 0 SECTION 000 - LOUVERS AND VENTS PART GENERAL RELATED DOCUMENTS EASTLAKE FIRE STATION REPLACEMENT HILLSBOROUGH COUNTY CIP # Drawings and general provisions of the Contract, including General and
More informationExpansion Joint Covers (079513)
Expansion Joint Covers 07 95 00 (079513) PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and Division-1
More informationChevy Chase Club June 30, 2008 Bowie Gridley Architects SECTION GYPSUM BOARD SHAFT WALL ASSEMBLIES
SECTION 092116.23 - GYPSUM BOARD SHAFT WALL ASSEMBLIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION MISCELLANEOUS METALS
PART 1 GENERAL 1.1 WORK OF THIS SECTION A. Contractor shall provide all labor, materials, equipment and incidentals as shown, specified and required to furnish and install all miscellaneous metal fabrications
More informationARMSTRONG SHALL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF THE USE OF ANY OF ITS GUIDE SPECIFICATIONS. SECTION PERIMETER TRANSITION SYSTEM
Armstrong World Industries, Inc. Please understand that you are responsible for the accuracy of all project specifications, including any Armstrong Ceilings guide specifications that you use. ARMSTRONG
More informationSECTION GYPSUM BOARD ASSEMBLIES
SECTION 09 21 16 GYPSUM BOARD ASSEMBLIES PART 1 GENERAL 1.1 SECTION INCLUDES A. Metal stud wall and ceiling framing, 20 gauge. B. Metal channel suspended ceiling framing. C. Gypsum board. D. Gypsum sheathing.
More information