LEANDER COMPOSITE ZONING (GC GENERAL COMMERCIAL)

Size: px

Start display at page:

Download "LEANDER COMPOSITE ZONING (GC GENERAL COMMERCIAL)"

Adela Johnston
5 years ago
Views:

LEANDER COMPOSITE ZONING (GC GENERAL COMMERCIAL) This ordinance defines a zoning district in the City of Leander as a composite of three different components: These options

location considerations for specific uses.

1 LEANDER COMPOSITE ZONING (GC GENERAL COMMERCIAL) This ordinance defines a zoning district in the City of Leander as a composite of three different components: These options primarily determine what use the building will be utilized for and any special considerations for that use such as residential lot sizes and if there are any special location considerations for specific uses. Note that the list of use components is in order of increasing intensity (decreasing restrictions) except for a PUD district (because this district is a customized zoning district). FIGURE A - USE COMPONENT A Site Component (Article V) may be any one of the following (see Figure B): FIGURE B SITE COMPONENTS

2 Note that the list of site components is in order of increasing intensity (decreasing restrictions). FIGURE C ARCHITECTURAL COMPONENTS All use components are required to be combined with a site and an architectural component. These combined components are called Composite Zoning Districts (see Figure D). For example, if an LC use component is combined with a Type 1 site component and a Type B

architectural component, the composite zoning district is LC-1-B. This ordinance contains rules with regard to how the components can be combined. There are over one hundred (100) combining options.

3 architectural component, the composite zoning district is LC-1-B. This ordinance contains rules with regard to how the components can be combined. There are over one hundred (100) combining options. FIGURE D COMPOSITE ZONING DISTRICTS (SOUP SALAD & ENTRÉE) A Component Zoning District is created when one selection is made from each of the components menus. (Use, Site and Architectural) These General Standards contain general rules applicable to all composite zoning districts. A PUD may include customized rules that may differ from the general rules. The combination of a Composite Zoning District (entrée, soup and salad) which includes the rules for the applicable districts, and the General Standards (basic ingredients) which provides general standards for all districts, constitutes the Zoning Standards (meal) for land within the City of Leander (see Figure F following page). In order to determine which composite district standards are applicable to a certain tract, refer to the Leander Zoning Map (a copy is available at the City of Leander Planning Department). The map indicates the composite zoning district for all land within the City. The pages of this ordinance are color coded based on whether the section pertains to use, site or architectural standards. Use related sections are green. Site related sections are gold. Architectural related sections are blue. The white sections include administrative and procedural rules as well as general information such as definitions, purpose, intent, etc. If you, as a land owner, desire to request a zoning change for property, obtain a zoning application form on line at the City s web site ( or obtain one at the Planning Department. Meet with a representative of the Planning Department to discuss your proposed application. The zoning request should be tailored to fit within the context of the site location and the type of development that is desired. Select a use, site and architectural component that best suits these goals and is in compliance with the general purpose of this ordinance (see Article I, Sec. 3). Complete the application and prepare or btain all information requested in the application form. Once the application has been submitted with all information required, the request will be reviewed by the Planning and Zoning Commission and acted on by the City Council in conjunction with public hearings. The process typically takes about six to seven weeks to complete. A PUD district may take longer to process. To obtain a building permit, a building permit application must be completed and submitted to the Permits Division. The application is reviewed for compliance with the zoning Standards and the Building Standards (refer to the Permits Division for a copy of the most recently adopted Building Standards). FIGURE F : COMPOSITE ZONING DISTRICT + GENERAL STANDARD +ZONING STANDARDS

Old Zoning Districts Local Commercial C-1 New Composite Zoning Districts Use Component SITE COMPONENT ARCHITECTURAL COMPONENT LC - LIGHT COMMERCIAL 2 B (a) Statement of Intent The Local Commercial

4 Old Zoning Districts Local Commercial C-1 New Composite Zoning Districts Use Component SITE COMPONENT ARCHITECTURAL COMPONENT LC - LIGHT COMMERCIAL 2 B (a) Statement of Intent The Local Commercial use component allows for the development of small scale, limited impact commercial, retail, personal services and office uses located in close proximity to their primary customers, which cater to the everyday needs of the nearby residents, and which may be located near residential neighborhoods. Access should be provided by a collector or higher classification street. (b) Conforming Uses Certain uses listed in this use component may also need to be supported by appropriate site components in order to be permitted. A building or premise shall be used only for the following purposes: (1) Any use permitted in the LO Local Office component (2) Artisan and handcraft activities and sales if such activities are located completely within an enclosed structure except for specific activities as provided in the applicable site component

5 (3) Bank or other lending institution (Note that drive-through service lanes are permitted only if provided in the applicable site component) (4) Bed and breakfast (5) Colleges, universities, vocational schools or other institutions of higher learning including related facilities (6) Cultural facilities including art gallery, museum, dancing or music academy, fitness center, martial arts academy, photographic or artist studio (7) Florist shop, greenhouse or nursery (8) Funeral home including embalming facilities associated with an on site funeral home or cemetery, but no crematory. (9) Grocery and dry goods sales including convenience stores (Note: Refer to Type 3 site component for outdoor fuel sales) (10) Medical clinics (11) Personal services including, but not limited to, barber shops, beauty parlors, tailoring, dressmaking, shoe repair, small appliance repair, bicycle repair, retail bakeries, catering and, under the following conditions, dry cleaning and laundry (including self service): (i) Dry cleaning machines shall be an EPA-approved non-vent unit and have an enclosed trough to accommodate any solvent spill. (ii) Solvent use shall be wet system utilizing only water and detergents or PERC systems, which is nonflammable perchloroethylene, and which is limited to 50 gallons on-site at any one time. Other alternative solvent may be considered (e.g. D-5) by the Director of Planning on a case by case basis. (iii) No fumes, odor or noise shall be detectable beyond the premises of the business. (iv) No chemical discharge shall be allowed into an organized central sewer system or private septic disposal system unless such system is a wet system utilizing only water and detergents. (v) There shall be a maximum of 1,800 square feet for the gross area of the business. (vi) Dry clean processing is limited to on-site business, not trucked-in processing. (vii) Used chemicals and filters shall be disposed of weekly or after every 8,000 pounds of processing and be transported by a state-licensed disposal company. (12) Pharmacies (13) Restaurants (14) Retail sales of new product and services (15) Other similar uses as determined by the Director of Planning based on the criteria of

Commercial, Residential and Office (CRO) District

Commercial, Residential and Office (CRO) District (a) Permitted uses and structures. (1) Medical and dental office or clinics (but not hospitals). (2) Professional and business offices. (3) Multiple-family