SECTION Metal Studs, Lath, Suspension Ceilings, Plaster, and Stucco Ceramic Tile.

Size: px
Start display at page:

Download "SECTION Metal Studs, Lath, Suspension Ceilings, Plaster, and Stucco Ceramic Tile."

Transcription

1 SECTION ACOUSTICAL CEILINGS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: Metal Studs, Lath, Suspension Ceilings, Plaster, and Stucco Ceramic Tile REFERENCES A. American Society for Testing and Materials (ASTM): 1. A Standard Specification for Steel Sheet, Zinc-coated (Galvanized) or Zinc-iron Alloycoated (Galvannealed) by the Hot-dip Process. 2. C Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-In Panel Ceilings. 3. C Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels. 4. E Classification for Acoustical Ceiling Products. B. Ceiling and Interior Systems Contractors Association (CISCA) publication (current edition): Acoustical Ceilings - Use and Practice. C. Underwriters Laboratories (UL) fire rating listings and classifications SUBMITTALS A. Submit properly identified product data, including properties of lay-in panels, fire tests, details of suspension grid system, and installation instructions for review before starting work. B. Shop Drawings: As may be required by A/E. Coordinate grid erection drawings with lighting fixtures, air-conditioning outlets, access panels, sound system, and other openings and irregularities. Project No. SPECIFICATION GUIDELINES

2 C. Samples: Submit identified samples of each of the following for review and selection: 1. Exposed grid suspension system with angle. 2. Acoustical lay-in panel, 12 inches square piece. PART 2 PRODUCTS 2.01 MATERIALS A. Acoustical Lay-in Panels, Mineral Fiber Type: inches x 24 inches. 2. Complying with ASTM E1264, Class A, Type 3, Form 2, square edged. 3. Nominal Thickness: 5/8". 4. Finish: Factory applied, washable white. a. Directional Panels: 1) Armstrong: Minaboard #756 Fissured lay-in 2) Celotex: Hytone DMRF-157 Fissuretone II lay-in 3) USG Interiors: Auratone #560 Fissured lay-in panel. b. Non-directional Panels: 1) Armstrong: Cortega #770 Fissured 2) Celotex: Baroque BET-157 Fissured lay-in 3) USG Interiors: Auratone Radar #2110 Fissured lay-in panel. B. Acoustical Lay-in Panels, Fire Rated Mineral Fiber Type: inches x 24 inches. 2. Complying with ASTM E , Fire Rated, Class A, Type 3, Form 2, square edged. 3. Nominal Thickness: 5/8". 4. Finish: Factory applied, washable white Weight: 1 pound per square foot minimum. Manufacturers: a. Directional: Project No. SPECIFICATION GUIDELINES

3 1) Armstrong: Minaboard #896 Fissured Fire Guard 2) Celotex: Hytone Fissuretone II PDRF-157 Protectone 3) USG Interiors: #585 Fissured Fire Code lay-in b. Non-directional: 1) Armstrong: Cortega #824 Fissured Fire Guard 2) Celotex: Baroque #PBT 157 Fissured Protectone 3) USG Interiors: Radar #2115 Fissured Fire Code C. Vinyl Faced Lay-in Panels, Gypsum Type: inches x 24 inches. 2. Gypsum, complying with ASTM E1264, Class 3, Type 3, Form A. 3. Nominal Thickness: 1/2". 4. Finish: Factory applied 0.002" vinyl, washable white. a. Celotex: Clean Room VTS-857 Vinyltone lay-in panels b. USG Interiors: Clean Room #3260 Stipple pattern D. Acoustical Lay-in Panels, Wood Fiber Type: 1. Wood fiber, complying with ASTM E1264, Class A, Type XX, square edge. 2. Minimum Thickness: 1-1/2". 3. Size: 23-3/4" x 47-3/4". 4. Finish: Factory applied, white. a. Tectum Inc. "Tectum". b. Or accepted equivalent. E. Acoustic ceiling baffles (sound absorbers with noncorrosive grommets) shall be used in active spaces such as gymnasiums, shops, etc. 1. Size: 2 feet x 4 feet x 2 inches. 2. Finish: UL listed, "Nubby" glass cloth fabric, or accepted equivalent. Painted "Nubby" cloth is acceptable if painting is done by the manufacturer and the NRC factor has not been affected by the process. Project No. SPECIFICATION GUIDELINES

4 3. Color: White or standard colors offered by the manufacturer, as selected by the A/E. 4. Noise Reduction Coefficient (NRC): 0.90 to 1.0. a. Capaul Corporation. b. Metal Building Interior Products Co.: Cloud-Lite. c. Sound Concepts, Canada Inc. F. Hangers: 12 gage (0.109" diameter) annealed steel wire, galvanized. G. Exposed Suspension Grids For Acoustical Lay-in Panels: 1. 2 feet x 2 feet grid pattern with steel caps for exposed grid tee and angle members complying with ASTM C635, zinc-coated or hot-dipped galvanized complying with A653, factory painted steel parts with factory applied white baked enamel or polyester finish. ****** ***** **** *** ** * ** *** **** ***** ****** Note to Specifier: Use one of the 3 following suspension systems at cafeteria kitchens, salad bars, snack bars, and serving areas. ****** ***** **** *** ** * ** *** **** ***** ****** 2. 2 feet x 2 feet grid pattern, complying with ASTM C635, hot-dipped galvanized steel tee and cap, painted cap, and stainless steel clips feet x 2 feet grid pattern, complying with ASTM C635, hot-dipped galvanized steel tee, painted aluminum cap, and stainless steel clips feet x 2 feet grid pattern, complying with ASTM C635, aluminum tee, painted aluminum cap, and stainless steel clips. a. Armstrong. b. Celotex. c. Chicago Metallic Corporation. d. USG Interiors, Inc. (Donn). PART 3 EXECUTION 3.01 INSTALLATION A. Powder activated fasteners are not allowed. 1. Coordinate and provide inserts, anchors, bolts, Project No. SPECIFICATION GUIDELINES

5 hangers, or other means to support ceilings suspended from structure. 2. Drill structure as needed to support equipment if inserts have been omitted from the concrete structure. B. Install specified suspension system and acoustical lay-in panels according to ASTM C636 and CISCA Publication "Acoustical Ceilings - Use and Practice", and applicable manufacturer's printed instructions. 1. Complete partitions indicated to be extended to overhead construction with finishes applied before installation of ceilings abutting such partitions. 2. Provide one hanger minimum for each 16 square feet of ceiling. a. Locate hanger wire not more than 1 foot away from main runners resting on wall trim. C. Acoustical Lay-in Panels: 1. Fit acoustical lay-in panels to grid accurately, without dented, broken, cracked, chipped, or soiled surfaces. 2. A cut panel shall be a size that will not expose an edge when the panel is slid to the opposite side. D. Light Fixtures: 1. Fit acoustical lay-in panels accurately around surface mounted and stem mounted electrical fixture outlets. 2. Adequately support tees supporting light fixtures by hanger wires so grid is level after light fixture installation. E. Alignment: a. Provide a hanger wire within 3 inches of each recessed lay-in light fixture corner. 1. Align suspension members for true level surfaces and straight lines. Run joints and exposed grid members parallel to the room axis in both directions. 2. Install exposed suspension grids per installers accepted grid layout drawings, properly coordinated with air conditioning and electrical trades. F. Border Balance: 1. Balance border areas to avoid acoustical units less Project No. SPECIFICATION GUIDELINES

6 than 1/2 unit wide. G. Textured or Patterned Acoustical Panels: Install in pattern in one direction including grain of panels with alternating grain, unless otherwise directed in writing by A/E ADJUSTING AND CLEANING A. Replace dirty or discolored acoustical panel surfaces following erection and leave free from defects. B. Remove damaged or improperly installed acoustical panels and replace. END OF SECTION Project No. SPECIFICATION GUIDELINES

SECTION Metal Studs, Lath, Suspension Ceilings, Plaster, and Stucco Ceramic Tile.

SECTION Metal Studs, Lath, Suspension Ceilings, Plaster, and Stucco Ceramic Tile. SECTION 09510 ACOUSTICAL CEILINGS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 09200 - Metal Studs, Lath, Suspension Ceilings, Plaster, and Stucco. 2. 09310 - Ceramic Tile. 1.02 REFERENCES A. American

More information

***************************************************************************************************************

*************************************************************************************************************** 09510 ACOUSTICAL CEILINGS SPECIFIER: CSI MasterFormat 2004 number 09 51 00 PART 1 GENERAL 1.1 SUMMARY A. Related Sections: 1. 09200 - Metal Studs, Lath, Suspension Ceilings, Plaster, and Stucco. 2. 09310

More information

A. This Section includes acoustical panel ceilings installed with exposed suspension systems.

A. This Section includes acoustical panel ceilings installed with exposed suspension systems. SECTION 09511 ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification

More information

SECTION ACOUSTICAL CEILINGS

SECTION ACOUSTICAL CEILINGS SECTION 09511 ACOUSTICAL CEILINGS PART 1 GENERAL 1.01 SECTION INCLUDES A. Acoustical ceiling panels. B. Exposed grid suspension system. C. Wire hangers, fasteners, main runners, cross tees, and wall angle

More information

Store No MAY 13 Addendum No. 1 SECTION ACOUSTICAL PANEL CEILINGS

Store No MAY 13 Addendum No. 1 SECTION ACOUSTICAL PANEL CEILINGS SECTION 09511 ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

SECTION NON-STRUCTURAL METAL FRAMING

SECTION NON-STRUCTURAL METAL FRAMING SECTION 09 22 16 PART 1 - GENERAL 1.1 DESCRIPTION A. This section specifies steel studs wall systems, shaft wall systems, ceiling or soffit suspended or furred framing, wall furring, fasteners, and accessories

More information

Construction Standards PAGE

Construction Standards PAGE Construction Standards PAGE 095113-1 SECTION 095113 - PART 1 - GENERAL 1.1 M.S.U. ISSUES 1. It the intent of MSU that all joint sealants used on its projects will comply with LEED NC 3 Credit Requirements

More information

SECTION NON-STRUCTURAL METAL FRAMING

SECTION NON-STRUCTURAL METAL FRAMING PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 22 16 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable

More information

Union County Vocational - Technical Schools Scotch Plains, New Jersey

Union County Vocational - Technical Schools Scotch Plains, New Jersey SECTION 095113 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

UniSpec II - Store Planning

UniSpec II - Store Planning UniSpec II - Store Planning 072613 SECTION 09511 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Suspended metal grid ceiling system. 2. Acoustical panels. 3. Perimeter

More information

THIS SECTION IS BASED ON ROCKFON S TRADITIONS METAL CEILING PANELS.

THIS SECTION IS BASED ON ROCKFON S TRADITIONS METAL CEILING PANELS. PAGE 1 THIS SECTION IS BASED ON ROCKFON S TRADITIONS METAL CEILING PANELS. Rockfon Traditions Metal Ceiling Panels are meant for interior applications, specifications as shown here pertain to interior

More information

A. Product Data: Submit manufacturer's descriptive literature, and recommendations and instructions for installation.

A. Product Data: Submit manufacturer's descriptive literature, and recommendations and instructions for installation. SECTION 09512 - ACOUSTICAL TILECEILINGS (ACT-01 and ACT-02) PART 1 - GENERAL 1.01 SUMMARY A. Section includes ceilings consisting of acoustical panels and exposed suspension systems. This ceiling system

More information

SECTION ACOUSTICAL TILE. *(Filed Sub-Bid Required) 1.00 TIME, MANNER AND REQUIREMENTS FOR SUBMITTING SUB-BIDS

SECTION ACOUSTICAL TILE. *(Filed Sub-Bid Required) 1.00 TIME, MANNER AND REQUIREMENTS FOR SUBMITTING SUB-BIDS SECTION 090003 *(Filed Sub-Bid Required) PART 1 GENERAL 1.00 TIME, MANNER AND REQUIREMENTS FOR SUBMITTING SUB-BIDS A. Sub-bids shall be submitted in accordance with provisions of the General Laws (Ter.

More information

SECTION ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL

SECTION ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL SECTION 09511 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.01 DESCRIPTION: A. Work under this section is subject to requirements of the Contract Documents including the General Conditions and Supplementary

More information

SECTION LINEAR METAL CEILINGS

SECTION LINEAR METAL CEILINGS PART 1 - GENERAL 1.1 DESCRIPTION: A. This Section Includes: SECTION 09 54 23 LINEAR METAL CEILINGS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. Also delete any other item or

More information

.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.

.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Cast

More information

Nortrax Section David Manchester Road, Ottawa NON-STRUCTURAL METAL FRAMING 16 May 2014 Page 1

Nortrax Section David Manchester Road, Ottawa NON-STRUCTURAL METAL FRAMING 16 May 2014 Page 1 16 May 2014 Page 1 PART 1 GENERAL 1.1 DESCRIPTION This section specifies steel studs wall systems, shaft wall systems, ceiling or soffit suspended or furred framing, wall furring, fasteners, and accessories

More information

Banyan Air Service November 18, 2011 AVE Aviation and Commerce Center Building 1 Miami, FL

Banyan Air Service November 18, 2011 AVE Aviation and Commerce Center Building 1 Miami, FL SECTION 09511 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

Section GYPSUM DRYWALL

Section GYPSUM DRYWALL Section 09250 GYPSUM DRYWALL 1.00 GENERAL: A. Gypsum Association Specification GA216 and manufacturer's instruction (whichever is more stringent). 2.00 DRYWALL MATERIALS: A. Exposed Gypsum Board: ASTM

More information

Student Services & Classroom Addition

Student Services & Classroom Addition SECTION 095133 - ACOUSTICAL METAL PAN CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01

More information

UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:

UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number: SECTION 095113 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. AC: Articulation

More information

A. This Section includes ceilings consisting of acoustical panels and exposed suspension systems.

A. This Section includes ceilings consisting of acoustical panels and exposed suspension systems. SECTION 09 51 13 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply

More information

SECTION ACOUSTICAL PANEL CEILINGS

SECTION ACOUSTICAL PANEL CEILINGS SECTION 095113 ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION (09512) - ACOUSTICAL TILE CEILINGS

SECTION (09512) - ACOUSTICAL TILE CEILINGS SECTION 09 51 23 (09512) - ACOUSTICAL TILE CEILINGS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Suspended Metal Grid Systems Complete With Wall Trim 2. Suspended Fiberglass Grid Systems Complete

More information

PRESTON HEALTH SERVICES ARCHITECT'S NO. 2700

PRESTON HEALTH SERVICES ARCHITECT'S NO. 2700 SECTION 09 5113 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

THIS SECTION IS BASED ON ROCKFON S CURVGRID ONE-DIRECTIONAL CURVED METAL CEILING PANELS.

THIS SECTION IS BASED ON ROCKFON S CURVGRID ONE-DIRECTIONAL CURVED METAL CEILING PANELS. PAGE 1 THIS SECTION IS BASED ON ROCKFON S CURVGRID ONE-DIRECTIONAL CURVED METAL CEILING PANELS. Rockfon CurvGrid One-Directional Curved Metal Ceiling Panels are meant for interior applications, specifications

More information

SECTION ACOUSTICAL CEILINGS (CEMENTITIOUS WOOD FIBER CEILINGS)

SECTION ACOUSTICAL CEILINGS (CEMENTITIOUS WOOD FIBER CEILINGS) Tectum Inc. 105 South Sixth Street Newark, OH 43055 Phone: (888) 977-9691 Phone: (740) 345-9691 Fax: (800) 832-8869 E-mail: info@tectum.com www.tectum.com This MANU-SPEC utilizes the Construction Specifications

More information

Union County Vocational - Technical Schools Scotch Plains, New Jersey

Union County Vocational - Technical Schools Scotch Plains, New Jersey SECTION 095423 - LINEAR METAL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION ACOUSTICAL CEILING SYSTEMS

SECTION ACOUSTICAL CEILING SYSTEMS SECTION 09 51 13 PART 1 - GENERAL 1.01 SUMMARY A. This Section includes the following: 1. Ceilings consisting of acoustical panels and exposed suspension systems. 2. T-Bar mounted light fixture support

More information

1. Acoustical panels. 2. Exposed suspension systems for ceilings. 3. Wire hangers, fasteners, main runners, cross tees, and wall angle moldings.

1. Acoustical panels. 2. Exposed suspension systems for ceilings. 3. Wire hangers, fasteners, main runners, cross tees, and wall angle moldings. SECTION 095113 - ACOUSTICAL PANEL WALLS & CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

A. ASTM C635, Standard Specifications for Metal Suspension Systems. B. ASTM C636, Recommended Practice for Installation of Metal Suspension System

A. ASTM C635, Standard Specifications for Metal Suspension Systems. B. ASTM C636, Recommended Practice for Installation of Metal Suspension System SECTION 09510 / 09 51 00 USG TRUE WOOD LAY IN AND ACCESSIBLE REVEAL Product Specification WOOD CEILING PANELS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract,

More information

THIS SECTION IS BASED ON ROCKFON S PLANOSTILE D LAY-IN METAL CEILING PANELS.

THIS SECTION IS BASED ON ROCKFON S PLANOSTILE D LAY-IN METAL CEILING PANELS. PAGE 1 THIS SECTION IS BASED ON ROCKFON S PLANOSTILE D LAY-IN METAL CEILING PANELS. Though Rockfon Planostile D Lay-In Metal Ceiling Panels are meant for interior and exterior applications, Specifications

More information

THIS SECTION IS BASED ON ROCKFON S SPANAIR HOOKON METAL CEILING PLANKS.

THIS SECTION IS BASED ON ROCKFON S SPANAIR HOOKON METAL CEILING PLANKS. PAGE 1 THIS SECTION IS BASED ON ROCKFON S SPANAIR HOOKON METAL CEILING PLANKS. Rockfon SpanAir HookOn Metal Ceiling Planks are meant for interior applications, specifications as shown here pertain to interior

More information

SECTION ACOUSTICAL CEILINGS

SECTION ACOUSTICAL CEILINGS PART 1- GENERAL 1.1 DESCRIPTION SECTION 09 51 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable

More information

SECTION ACCORDION FOLDING PARTITIONS

SECTION ACCORDION FOLDING PARTITIONS PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 10 22 26.13 ACCORDION FOLDING PARTITIONS SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable

More information

SECTION AXIOM INDIRECT FIELD LIGHT COVE PERIMETER SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENTS

SECTION AXIOM INDIRECT FIELD LIGHT COVE PERIMETER SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENTS SECTION 09 51 13 AXIOM INDIRECT FIELD LIGHT COVE PERIMETER SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENTS Drawings and general conditions of Contract, including General and Supplementary Conditions and

More information

SECTION ( Specialty Ceilings) TBAR LED Smartlight Acoustical Ceiling Integration

SECTION ( Specialty Ceilings) TBAR LED Smartlight Acoustical Ceiling Integration SECTION 09 50 00 (09 54 00 Specialty Ceilings) TBAR LED Smartlight Acoustical Ceiling Integration PART 1 - GENERAL 1.1 RELATED DOCUMENTS 1.2 SUMMARY Drawings and general conditions of Contract, including

More information

THIS SECTION IS BASED ON ROCKFON S PLANOSTILE SNAP-IN METAL CEILING PANELS.

THIS SECTION IS BASED ON ROCKFON S PLANOSTILE SNAP-IN METAL CEILING PANELS. PAGE 1 THIS SECTION IS BASED ON ROCKFON S PLANOSTILE SNAP-IN METAL CEILING PANELS. Though Rockfon Planostile Snap-In Metal Ceiling Panels are meant for interior and exterior applications, Specifications

More information

METAL SUSPENSION SYSTEMS FOR LAY-IN PANEL CEILINGS: 2001 CBC IR

METAL SUSPENSION SYSTEMS FOR LAY-IN PANEL CEILINGS: 2001 CBC IR California Department of General Services. Division of the State Architect. Interpretation of Regulations Document METAL SUSPENSION SYSTEMS FOR LAY-IN PANEL CEILINGS: 2001 CBC IR 25-2.01 References: 2001

More information

SECTION ACOUSTICAL PANEL CEILINGS. A. Section includes acoustical panels and exposed suspension systems for ceilings.

SECTION ACOUSTICAL PANEL CEILINGS. A. Section includes acoustical panels and exposed suspension systems for ceilings. SECTION 09 51 13 ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 SUMMARY A. Section includes acoustical panels and exposed suspension systems for ceilings. 1.2 SUBMITTALS A. Product Data: For each type

More information

Union County Vocational - Technical Schools Scotch Plains, New Jersey

Union County Vocational - Technical Schools Scotch Plains, New Jersey SECTION 092216 - NON-STRUCTURAL METAL FRAMING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

A. ASTM C635, Standard Specifications for Metal Suspension Systems. B. ASTM C636, Recommended Practice for Installation of Metal Suspension System

A. ASTM C635, Standard Specifications for Metal Suspension Systems. B. ASTM C636, Recommended Practice for Installation of Metal Suspension System SECTION 09510 / 09 51 00 USG TRUE WOOD LINEAR PANELS Product Specification WOOD CEILING PANELS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General

More information

Geometrik Manufacturing Inc.

Geometrik Manufacturing Inc. PRODUCT: GEOSQUARE WOOD TILES Page 1 PART I GENERAL 1.1 SECTION INCLUDES 1. GeoSquare wood [acoustical] ceiling tiles. 2. Coordination with other trades that have parts attached to, penetrate through or

More information

SECTION ACOUSTICAL PANEL CEILINGS

SECTION ACOUSTICAL PANEL CEILINGS SECTION 09511 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

OCALA INTERNATIONAL AIRPORT MBI PN: GENERAL AVIATION TERMINAL JANUARY 16, 2018 ADDENDUM-ISSUE

OCALA INTERNATIONAL AIRPORT MBI PN: GENERAL AVIATION TERMINAL JANUARY 16, 2018 ADDENDUM-ISSUE SECTION 09511 ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

SECTION LINEAR METAL CEILINGS

SECTION LINEAR METAL CEILINGS SECTION 09 5423 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification Sections, apply

More information

LINEAR METAL CEILINGS Section

LINEAR METAL CEILINGS Section PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

More information

Geometrik Manufacturing Inc.

Geometrik Manufacturing Inc. PRODUCT: GEO SYSTEM Page 1 PART I GENERAL 1.1 SECTION INCLUDES 1. Linear Acoustical Wood Ceiling System including suspension hardware by Geometrik Manufacturing Inc. 2. Coordination with other trades that

More information

SECTION GYPSUM BOARD ASSEMBLIES

SECTION GYPSUM BOARD ASSEMBLIES SECTION 09 21 16 GYPSUM BOARD ASSEMBLIES PART 1 GENERAL 1.1 SECTION INCLUDES A. Metal stud wall and ceiling framing, 20 gauge. B. Metal channel suspended ceiling framing. C. Gypsum board. D. Gypsum sheathing.

More information

EXTERIOR PLANK SERIES SPECIFICATION DATA

EXTERIOR PLANK SERIES SPECIFICATION DATA EXTERIOR PLANK SERIES SPECIFICATION DATA This specification includes the Exterior Plank ceiling system including suspension systems and components along with related work such as mechanical air grills,

More information

SECTION ACOUSTICAL CEILINGS

SECTION ACOUSTICAL CEILINGS SECTION 09 51 00 ACOUSTICAL CEILINGS SPEC WRITER NOTE: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. Coordinate with Section 09 06 00, SCHEDULE FOR FINISHES,

More information

SECTION CEMENTITIOUS WOOD FIBER DECKS

SECTION CEMENTITIOUS WOOD FIBER DECKS PART 1 - GENERAL 1.1 DESCRIPTION SECTION 03 51 13 CEMENTITIOUS WOOD FIBER DECKS SPEC WRITE NOTES: 1. Delete between // // if not applicable to project. 2. Also delete any other item or paragraph not applicable

More information

SECTION LIGHTING. A. Section Basic Electrical Materials and Methods

SECTION LIGHTING. A. Section Basic Electrical Materials and Methods SECTION 16500 LIGHTING PART 1 GENERAL 1.01 SECTION INCLUDES A. Provide lighting fixtures of sizes, types and ratings as indicated; complete with, but not necessarily limited to, housings, lamps, lamp holders,

More information

SECTION COMPOSITE CORE ACOUSTICAL PANEL CEILINGS. Sound-Rite Inc. #9, rd Avenue NE Calgary, AB T2A 7P3

SECTION COMPOSITE CORE ACOUSTICAL PANEL CEILINGS. Sound-Rite Inc. #9, rd Avenue NE Calgary, AB T2A 7P3 SECTION 09510 COMPOSITE CORE ACOUSTICAL PANEL CEILINGS Sound-Rite Inc. #9, 2821 3rd Avenue NE Calgary, AB T2A 7P3 Tel 403-296-0505 Fax 403-296-0511 Email info@sound-rite.com Web www.sound-rite.com Techstyle

More information

Code Compliance Meets the requirements for suspended ceilings in accordance with the 2012 International Building Code.

Code Compliance Meets the requirements for suspended ceilings in accordance with the 2012 International Building Code. Pei Evaluation Service is an accredited ISO Standard 17065 Product Certifier, accredited by the IAS. This Product Evaluation Report represents a product that Pei ES has Evaluated and this product has a

More information

LOWER MACUNGIE TOWNSHIP COMMUNITY CENTER ADDITIONS AND RENOVATIONS

LOWER MACUNGIE TOWNSHIP COMMUNITY CENTER ADDITIONS AND RENOVATIONS 0 0 0 SECTION 0. - ACOUSTICAL PANEL CEILINGS PART - GENERAL. SUMMARY A. This Section includes the following work:. Acoustical panels and exposed suspension systems for ceilings.. Patching of existing acoustical

More information

General applications. Fast. Easy. Customer Focused.

General applications. Fast. Easy. Customer Focused. C E I L I N G S U S P E N S I O N S Y S T E M S Fast. Easy. Customer Focused. General applications 200 Snap-Grid (Hook) /16) 250 Fire-Front Snap-Grid (Hook) /16) Seismic 1200 & 1200 (Stab) /16) 1250 Fire-Front

More information

SECTION WALL AND DOOR PROTECTION

SECTION WALL AND DOOR PROTECTION PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 10 26 00 WALL AND DOOR PROTECTION SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable to

More information

EXCEL Medical Waste - Equipment Installation Section SECTION GYPSUM BOARD

EXCEL Medical Waste - Equipment Installation Section SECTION GYPSUM BOARD SECTION 09 29 00 GYPSUM BOARD PART 1 - GENERAL 1.1 DESCRIPTION This section specifies installation and finishing of gypsum board. 1.2 RELATED WORK A. Installation of steel framing members for walls, partitions,

More information

SECTION GYPSUM BOARD ASSEMBLIES

SECTION GYPSUM BOARD ASSEMBLIES SECTION 09260 GYPSUM BOARD ASSEMBLIES PART 1 GENERAL 1.1 SUMMARY A. Provide gypsum board assemblies. 1.2 SUBMITTALS A. Product Data: Submit manufacturer's product data and installation instructions for

More information

Addendum #4 NEW LOW HEAD OXYGEN SYSTEM Contractor EXHIBIT T SPECIAL PROVISIONS SECTION METAL SHADE STRUCTURE

Addendum #4 NEW LOW HEAD OXYGEN SYSTEM Contractor EXHIBIT T SPECIAL PROVISIONS SECTION METAL SHADE STRUCTURE SECTION 13 34 00 METAL SHADE STRUCTURE PART 1 - GENERAL 1.01 STRUCTURE TYPE A. Structure shall be free standing rigid frame and gable roof with slopes as indicated. Structure shall also include foundation,

More information

Ceiling Systems. Technical Guide

Ceiling Systems. Technical Guide Ceiling Systems Between us, ideas become reality In this booklet (also found on armstrong.com/capz) Pages 2-4 System Layout and Components Pages 5-8 Installation Details Pages 9-16 Configuration Drawings

More information

SECTION DRYWALL GRID LINEAR LIGHTING INTEGRATION

SECTION DRYWALL GRID LINEAR LIGHTING INTEGRATION SECTION 09 22 26 DRYWALL GRID LINEAR LIGHTING INTEGRATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS Drawings and general conditions of Contract, including General and Supplementary Conditions and Divisions-1

More information

SECTION OUTLET, PULL, AND JUNCTION BOXES

SECTION OUTLET, PULL, AND JUNCTION BOXES SECTION 16131 OUTLET, PULL, AND JUNCTION BOXES PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 09900 - Painting. 2. 16112 - Raceways and Conduits. 1.02 SYSTEM DESCRIPTION A. Performance Requirements:

More information

SIMEILINGS TORSION SPRING CEILING SYSTEM SPECIFICATION

SIMEILINGS TORSION SPRING CEILING SYSTEM SPECIFICATION TORSION SPRING CEILING SYSTEM SPECIFICATION NOTICE: Consult your local Sound Concepts representative or contact Sound Concepts at 204.783.6297 before specifying any optional or custom element as shape,

More information

SECTION METAL STUDS, METAL LATH, SUSPENSION CEILINGS, PLASTER, AND STUCCO

SECTION METAL STUDS, METAL LATH, SUSPENSION CEILINGS, PLASTER, AND STUCCO PART 1 GENERAL 1.01 SUMMARY SECTION 09200 METAL STUDS, METAL LATH, SUSPENSION CEILINGS, PLASTER, AND STUCCO A. Section Includes: 1. Non-load bearing steel studs. 2. Metal furring and lath. 3. Ceiling suspension

More information

SECTION STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS

SECTION STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS SECTION 08110 - STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General, Supplementary, and Special Conditions and Division 1 Specification

More information

1. This addendum contains the specifications for Acoustical Ceilings: public areas Lobby, Breakfast Room, etc. and not used on all doors.

1. This addendum contains the specifications for Acoustical Ceilings: public areas Lobby, Breakfast Room, etc. and not used on all doors. ADDENDUM NO. 4 PROJECT NAME: GENERAL CONTRACTOR: ADDRESS: Holiday Inn Express - York NGC Group Inc. 3830 South 6 th Street Lincoln, NE 68502 DATE OF ISSUANCE: May 10, 2013 DATE OF BID OPENING: Tuesday,

More information

SECTION Axiom Roller Shade Integration

SECTION Axiom Roller Shade Integration SECTION 09 51 13 Axiom Roller Shade Integration PART 1 GENERAL 1.1 RELATED DOCUMENTS 1.2 SUMMARY A. Section Includes: 1. Pre-engineered perimeter transition system B. Related sections: 1. Section 09 51

More information

UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:

UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number: SECTION 092216 - COLD FORMED STEEL FRAMING - NON-STRUCTURAL (CFSF-NS) PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 ACTION

More information

SECTION 9810 ACOUSTICAL SPACE UNITS BAFFLES AND CLOUDS

SECTION 9810 ACOUSTICAL SPACE UNITS BAFFLES AND CLOUDS SECTION 9810 ACOUSTICAL SPACE UNITS BAFFLES AND CLOUDS PART 1 GENERAL 1.01 SUMMARY Specifier Note: Revise paragraphs below to suit project requirements. A. Section Includes: Custom fabricated acoustical

More information

HIR 1 ACOUSTICAL, IMPACT RESISTANT, TACKABLE WALL PANEL SPECIFICATION

HIR 1 ACOUSTICAL, IMPACT RESISTANT, TACKABLE WALL PANEL SPECIFICATION HIR 1 ACOUSTICAL, IMPACT RESISTANT, TACKABLE WALL PANEL SPECIFICATION NOTICE: Consult your local Sound Concepts representative or contact Sound Concepts at 204.783.6297 before specifying any optional or

More information

SECTION GYPSUM BOARD ASSEMBLIES

SECTION GYPSUM BOARD ASSEMBLIES PART 1 - GENERAL 1.1 SUMMARY SECTION 09 21 16 A. Provide gypsum board assemblies as shown and specified. Work includes: 1. Walls, partitions, and soffits, including metal framing systems. 2. Acoustical

More information

A. Product Data: Submit manufacturer's product data for cementitious materials, lath, metal support components, and accessories.

A. Product Data: Submit manufacturer's product data for cementitious materials, lath, metal support components, and accessories. 09200 METAL STUDS, METAL LATH, SUSPENSION CEILINGS, PLASTER, AND STUCCO *************************************************************************************************************** SPECIFIER: CSI MasterFormat

More information

Project No: Pakenham Branch Library, Pakenham, Ontario Section DECEMBER, 2016 Page 1 of 6

Project No: Pakenham Branch Library, Pakenham, Ontario Section DECEMBER, 2016 Page 1 of 6 DECEMBER, 2016 Page 1 of 6 1 GENERAL 1.01 RELATED SECTIONS.1 Section 01 33 00 - Submittal Procedures..2 Section 07 21 16 - Batt and Blanket Insulation..3 Section 07 92 10 - Sealants..4 Section 09 91 00

More information

1. Non-load-bearing steel framing systems for interior gypsum board assemblies. 2. Suspension systems for interior gypsum ceilings and soffits.

1. Non-load-bearing steel framing systems for interior gypsum board assemblies. 2. Suspension systems for interior gypsum ceilings and soffits. SECTION 09 2216 - PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Non-load-bearing steel framing systems for interior gypsum board assemblies. 2. Suspension systems for interior gypsum ceilings and

More information

SECTION DECORATIVE METAL RAILINGS

SECTION DECORATIVE METAL RAILINGS SECTION 05 73 00 DECORATIVE METAL RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Vertical Stainless Steel Cable Railing System. B. Horizontal Stainless Steel Cable Railing System. 1.2 RELATED SECTIONS

More information

SECTION HANGERS AND SUPPORTS FOR PLUMBING

SECTION HANGERS AND SUPPORTS FOR PLUMBING SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

1. Hangers and supports for electrical equipment and systems.

1. Hangers and supports for electrical equipment and systems. PART 1 - GENERAL... 1 1.1 RELATED DOCUMENTS... 1 1.2 SUMMARY... 1 1.3 DEFINITIONS... 1 1.4 PERFORMANCE REQUIREMENTS... 1 1.5 SUBMITTALS... 2 1.6 QUALITY ASSURANCE... 2 1.7 COORDINATION... 2 PART 2 - PRODUCTS...

More information

SECTION HOLLOW METALWORK. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.

SECTION HOLLOW METALWORK. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. SECTION 081113 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting

More information

C. Samples: For each door face material, at least 3 by 5 inches (75 by 125 mm) in size, in specified finish.

C. Samples: For each door face material, at least 3 by 5 inches (75 by 125 mm) in size, in specified finish. SECTION 083113 - ACCESS DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS

SECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and

More information

Union County Vocational - Technical Schools Scotch Plains, New Jersey

Union County Vocational - Technical Schools Scotch Plains, New Jersey SECTION 102239 - FOLDING PANEL PARTITIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

where high efficiency is the standard

where high efficiency is the standard Access Doors 2016 where high efficiency is the standard Experience Milcor offers years of experience in the manufacture of a broad range of products and services for residential, commercial, institutional

More information

A. Submit the following in addition to the standard requirements.

A. Submit the following in addition to the standard requirements. SECTION [13120] OMNIFLEX 300 MODULAR WALL SYSTEM SECTION 1 GENERAL 1.01 SECTION INCLUDES A. This Section specifies all requirements necessary to furnish and install a complete modular wall system including,

More information

Make Waves. Topo 3-Dimensional System

Make Waves. Topo 3-Dimensional System Make Waves Topo 3-Dimensional System User s Guide Topo panels are offered in translucent and opaque to work with existing lighting and complement any color palette. Optional preengineered utility circles

More information

SUSPENSION REQUIREMENTS SEE DETAIL B1.2 TYPICAL SYSTEM SECTION SEE DETAIL 'A' THIS SHEET 2" MODULE. SPECIFICATIONS (unless noted otherwise)

SUSPENSION REQUIREMENTS SEE DETAIL B1.2 TYPICAL SYSTEM SECTION SEE DETAIL 'A' THIS SHEET 2 MODULE. SPECIFICATIONS (unless noted otherwise) 1 5 32 " 2" 27 32 " REQUIRED FOR 1 1 4 " 113 32 " 2 21 32 " SEE DETAIL B1.2 CARRIER SPAN VARIES DEPENDING ON DESIGN WIND PRESSURE 12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS SEE DETAIL B1.2 12

More information

The Contractor is responsible for quality control, including workmanship and materials furnished by his subcontractors and suppliers.

The Contractor is responsible for quality control, including workmanship and materials furnished by his subcontractors and suppliers. SECTION 05 31 13 STEEL FLOOR DECKING PART 1 - GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the contract, including General and Supplementary Conditions and Division 01 - Specification

More information

SECTION GYPSUM BOARD

SECTION GYPSUM BOARD SECTION 09 29 00 GYPSUM BOARD PART 1 - GENERAL 1.01 SUMMARY A. Section Includes 1. Gypsum board screw attached to wood framing and furring members, joint treatment, and accessories. 2. Installation of

More information

SECTION ACOUSTICAL WALL TREATMENT (CEMENTITIOUS WOOD FIBER WALL PANELS)

SECTION ACOUSTICAL WALL TREATMENT (CEMENTITIOUS WOOD FIBER WALL PANELS) Tectum Inc. 105 South Sixth Street Newark, OH 43055 Phone: (888) 977-9691 Phone: (740) 345-9691 Fax: (800) 832-8869 E-mail: info@tectum.com www.tectum.com This MANU-SPEC utilizes the Construction Specifications

More information

SECTION STEEL DECKING

SECTION STEEL DECKING SECTION 05 31 00 STEEL DECKING SPEC WRITER NOTE: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. Refer to Section 05 36 00, COMPOSITE METAL DECKING for floor

More information

NORTH HARRIS COUNTY REGIONAL WATER AUTHORITY PIPE HANGERS, Section PIPE HANGERS, SUPPORTS, AND RESTRAINTS

NORTH HARRIS COUNTY REGIONAL WATER AUTHORITY PIPE HANGERS, Section PIPE HANGERS, SUPPORTS, AND RESTRAINTS PART 1 GENERAL 1.01 SUMMARY Section 15140 PIPE HANGERS, This Section includes the furnishing and subsequent installation of: A. Pipe and equipment hangers, supports, and associated anchors B. Equipment

More information

SECTION COMPOSITE METAL DECKING

SECTION COMPOSITE METAL DECKING PART 1 GENERAL 1.1 DESCRIPTION: SECTION 05 36 00 COMPOSITE METAL DECKING SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable in the

More information

Keuka Studios May 2008 SECTION {05720} CABLE RAILING SYSTEM {CABLE RAILING SYSTEM} Display hidden text for Specifier Notes.

Keuka Studios May 2008 SECTION {05720} CABLE RAILING SYSTEM {CABLE RAILING SYSTEM} Display hidden text for Specifier Notes. SECTION 05 73 16 {05720} CABLE RAILING SYSTEM {CABLE RAILING SYSTEM} Display hidden text for Specifier Notes. PART 1 GENERAL 1.1 SUMMARY A. Section includes cable railing system, with architectural metal

More information

SECTION GYPSUM BOARD

SECTION GYPSUM BOARD SECTION 09250 GYPSUM BOARD PART 1GENERAL 1.1 SUMMARY A. Related Documents: General and Supplementary Conditions of the Contract, Division 1 - General Requirements, and Drawings are collectively applicable

More information

SECTION GYPSUM BOARD SYSTEM

SECTION GYPSUM BOARD SYSTEM PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 09 29 00 GYPSUM BOARD SYSTEM A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 specification sections,

More information

DIVISION 5 METALS SECTION COLD-FORMED METAL FRAMING

DIVISION 5 METALS SECTION COLD-FORMED METAL FRAMING DIVISION 5 METALS SECTION 05 40 00 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

GRID SYSTEM ECOPLUS SYSTEMS TWO-WAY EXPOSED SUSPENDED CEILING GRID SYSTEM

GRID SYSTEM ECOPLUS SYSTEMS TWO-WAY EXPOSED SUSPENDED CEILING GRID SYSTEM TWO-WAY EXPOSED SUSPENDED CEILING GRID SYSTEM TWO-WAY EXPOSED SUSPENDED CEILING GRID SYSTEM Ver 1.0 Dec. 2010 CONTENTS 3: TWO-WAY COMPONENTS & APPLICATION DETAIL 4: INSTALLATION DETAILS 5: INSTALLATION

More information

SECTION METAL DOORS & FRAMES

SECTION METAL DOORS & FRAMES SECTION 08-10-00 METAL DOORS & FRAMES Part 1 General 1.00 Scope of Work: Contractor shall provide labor and materials for a complete steel door install. 1.01 Section Includes A. Steel doors. B. Steel frames

More information