Post Wrap Charts. Round Steel Posts IPMRDSTLR-48 Height 4 Feet (1.2192m) Diameter 4 (10.16cm) Square Steel Posts

Size: px

Start display at page:

Download "Post Wrap Charts. Round Steel Posts IPMRDSTLR-48 Height 4 Feet (1.2192m) Diameter 4 (10.16cm) Square Steel Posts"

Edgar Stevenson
5 years ago
Views:

1 CHAPTER 1 Columns Columns Page 7

Post Wrap Charts Square Steel Post 4 x 4 (10cm x 10cm) A A) 4 (10cm) B C B) 4 (10cm) C) Inside Minimum 5-3/4 (14.6cm) Square Steel Post 6 x 6 (15cm x 15cm) A A) 6 (15.24cm) B C B) 6 (15.

16cm) IPMRDSTLR-120 Height 10 Feet (3.048m) Diameter 4 (10.16cm) Square Steel Posts IPMRDSTLSQ-48 Height 4 Feet (1.2192m) 4 x4 (10cm) IPMRDSTLSQ-96 Height 8 Feet (2.

2 Post Wrap Charts Square Steel Post 4 x 4 (10cm x 10cm) A A) 4 (10cm) B C B) 4 (10cm) C) Inside Minimum 5-3/4 (14.6cm) Square Steel Post 6 x 6 (15cm x 15cm) A A) 6 (15.24cm) B C B) 6 (15.24cm) C) Inside Minimum 8-5/8 (21.9cm) Round Steel Posts IPMRDSTLR-48 Height 4 Feet (1.2192m) Diameter 4 (10.16cm) IPMRDSTLR-96 Height 8 Feet (2.438m) Diameter 4 (10.16cm) IPMRDSTLR-120 Height 10 Feet (3.048m) Diameter 4 (10.16cm) Square Steel Posts IPMRDSTLSQ-48 Height 4 Feet (1.2192m) 4 x4 (10cm) IPMRDSTLSQ-96 Height 8 Feet (2.438m) 4 x4 (10cm) IPMRDSTLSQ-120 Height 10 Feet (3.048m) 4 x4 (10cm) Square Wood Dressed 4 x 4 (10 x 10cm) A Dressed to A) 3-1/2 (8.8cm) B B) 3-1/2 (8.8cm) C C) Inside Minimum 5 (12.7cm) Square Wood Dressed 6 x 6 (15.2 x 15.2cm) A Dressed A) 5-1/2 (13.9cm) B B) 5-1/2 (13.9cm) C C) Inside Minimum 7-3/4 (19.68cm) Square Wood Dressed 8 x 8 (20.3 x 20.3cm) B A C Dressed A) 7-1/2 (19cm) B) 7-1/2 (19cm) C) Inside Minimum 11-1/2 (29.21cm) Do not measure too tight as you need to take into account manufacturing tolerences that can be up to 1/4 (.63cm) minimum Dressed sizes as per AWC Properties of Structural Lumber S4S ( Post Wrap: * Pressure Treated Wood Posts 4x4, 6x6 * I-Beams * Round Metal * Square Metal Design Tip: Consider a post wrap. This gets the framing inspection complete then follow up with the decorative finished column cover once the inspector signs off. Columns Page 8

Design Tip: I have rotted columns - what do I do?

ADVANTAGES OF HARDWOOD: Hardwood columns offers full customization. Their durability is directly proportional to the wood, how they are installed and prepared.

Heights can be specified to the 1/4 (.63cm). Portions of the shaft can be fluted and/or smooth or rope twists. Full historic reproductions are available.

Paint them with clear wood preservative 2 coats, then applyexterior primer 2 coats, 1 coat of paint, then install, then 2 coats of final paint.

If you are mounting them on concrete always put a poly layer between the wood and the alkaline concrete. The bottom portion of the shaft or just bases can be manufactured to exact precision.

3 Design Tip: I have rotted columns - what do I do? a) a) Hardwood replacements can can be be the the whole column or or just just the the lower part part of of the the shaft b) b) Non-wood replacements can can be be close sizes made from molds ADVANTAGES OF HARDWOOD: Hardwood columns offers full customization. Their durability is directly proportional to the wood, how they are installed and prepared. For exteriors use either Western Red Cedar or Pine. All hardwood columns are made from wood staves 1-1/2 thick. FJPine is 1-1/4 thick. Diameters range from 2-1/2 (6.3cm) to greater. Heights can be specified to the 1/4 (.63cm). Portions of the shaft can be fluted and/or smooth or rope twists. Full historic reproductions are available. You can order them split for post wrap around load bearingposts. Paint them with clear wood preservative 2 coats, then applyexterior primer 2 coats, 1 coat of paint, then install, then 2 coats of final paint. Never drill breather holes in the bottom of the shaft as wood wants to become a tree again and sucks up water. If you are mounting them on concrete always put a poly layer between the wood and the alkaline concrete. The bottom portion of the shaft or just bases can be manufactured to exact precision. See Preparation page 211 COLUMNS MADE FROM MOLDS ArchPolymerTM is an inexpensive solution. It is a hi-density polyurethane, with the same consistency as White Pine. Shafts are easy to cut to length by cutting the bottom of the shaft. They come primed white. Made in 2 parts. Use spackling compound to cover the seams, sand and paint. They are water & rot resistant. PolyCompTM Exterior Composite. Highly durable for residential & commercial. 5% marble chips, 25% polyester resins and 70% calcium carbonate (ie sea shells) make them strong. Use bondo to do any future repairs. Fully Load bearing. Cut bottom of shaft to required heights. Made in 1 part or order split for post wrap. Meets ASTM-E84 fire rating. Fiberglass (FRP) Gelcoat, polyester resin & glass fibers. Gelcoat can be colored. They are molded in 2 pieces requiring bondo to cover the seams. NeoPlasterTM (GRG) Interior Composite Alpha gypsum, cement, water & glass fibers. Made in a mold in 2 pieces, tape & mud seam. Approximate wall thickness 1-1/2 (3.81cm) ZeamentTM Exterior Composite 4-7lbs per square foot Lite weight Portland cement, sand, alkali, resistant fibers, aggregates, polymer adhesives & water. Molded in 2 parts Seam remains as a reveal. Wall 1-1/2 (3.8cm). Best product for custom capitals for commercial applications. Internally pigmented 12 colors. Sandblasted for stone look. Hurricane, earthquake zones, can be submerged in water. Meets ASTM-E84 fire rating. StoneMoldTM Interior Composite Molded Stone 2-5lbs / square foot Alpha gypsum, pigment, aggregates, water & polymers. Made in two parts with the Seam remaining as a reveal. Approximate wall thickness 1-1/2 (3.8cm) Columns Page 9

4 Cylinders Hardwood Cylinders: Smooth / Fluted Reeded Wall thickness FingerJointPine 1-1/4 (3.17cm) Hardwood 1-1/2 (3.81cm) Custom Sizes Smooth Stainless Steel UNFINISHED CYLINDERS 24 Hardwoods (Custom Sizes Interior/Exterior) Hand Crafted Custom heights & diameters Multi-Part Order Whole or Split for Pilaster / Post Wrap Interior: Fingerjoint Pine (Paint only) wall thickness 1-1/4 (3.17cm) Stain Grade: AmPoplar, Maple, Sap Maple, Basswood, Ash, Birch, Red Oak, White Oak, African Mahogany, SAmerican Mahogany, Beech, Alder, Cherry, Walnut Wall thickness 1-1/2 (3.81cm) Exterior: White Pine, Knotty Pine, Clear Pine, Western Red Cedar ArchPolymerTM (Interior / Exterior Composite) Hi-density polyurethane with consistency of white pine, primed white. Water, rot, insect resistant. Cuts like wood and can be split for post wrap or pilaster application. No customization. PolyCompTM (Load Bearing Interior/Exterior) 70% calcium carbonate, 5% marble chips, 25% Polyester Resins. Meets ASTM-E84 Fire rated. Order whole or split for post wrap or pilaster. No customization, cut to height. UNFINISHED COMPOSITES Fiberglass (FRP - Interior / Exterior Composite) Gelcoat, polyester resin & glass fibers. Lite weight 2-3lbs / SqFoot. Good for earthquake and hurricane zones. Meets ASTM-E84 Fire rating. Water resistant for fountains & water displays. Mold in 2 pieces, Bondo seam. Can be customized or cut to height. NeoPlasterTM (GRG - Interior Composite) Alpha gypsum, cement, water, re-enforced with glass fibers. Lite weight 2-3 lbs per square foot. Meets ASTM-E84 Fire rated. Odorless and emission free. Interior use only in dry areas. Made from a mold in 2 pieces, tape & mud seam. No customization, cut to height. FINISHED COMPOSITES Composite Seam Diagram NeoPlasterTM / ZeamentTM StoneMoldTM / FiberglassTM 1-3/4 4.44cm cm Countersink screws Reeded min 1/8 * All specifications subject to change without notice Fluted Inside Frame by others Shims by others Tape Mud Sand and Fill with Finish Mix ZeamentTM Exterior Composite Lite weight Portland cement, sand, alkali resistant fibers, aggregates, polymer adhesives & water. Smooth, internally pigmented 12 colors. Sandblasted for Stone look. Exterior Use, Hurricane, earthquake zones, can be submerged in water. Meets ASTM- E84 Fire rating. Oderless & emission free safe for indoor use. Made with natural raw materials can experience light variation in color and texture. Molded in 2 parts - Seam remains as a reveal. StoneMoldTM Interior Composite Molded stone: Alpha gypsum, pigment, aggregates, water & polymers. Looks like natural stone. Weight 2-5 lbs/foot. Sealed with a clear finish. Made with natural raw materials and may experience slight variation in color and texture. Molded in 2 Parts - Seam remains as a reveal. STAINLESS STEEL Interior Grade T304, Exterior Grade T316 Finish Brushed or Mirror 2 or 4 reveals for joins Columns Page 10

Split (against wall) 3/4 Split for Inside Corner H = Total Height Materials: Load Bearing Cylinders a) PolyComposite made in 1 part Decorative Cylinders b) Hardwood Type Diameters from 4 to 20 c)

5 CUSTOM: Cylinders Diameter from 4 to 36 (10.1 to 91.4cm) => (H) => <= A <= A A = Top & Bottom of Shaft Diameter: Circle: Interior Exterior Smooth / Fluted / Reeded Diameter: How many Whole Split for Post Wrap Size of Post to Wrap Engaged Cylinder 1/2 Split (against wall) 3/4 Split for Inside Corner H = Total Height Materials: Load Bearing Cylinders a) PolyComposite made in 1 part Decorative Cylinders b) Hardwood Type Diameters from 4 to 20 c) ArchPolymerTM made in 2 parts Unfinished: 2 parts with reveal Diameters from 4 to 36 d) NeoPlasterTM (GRG) e) Fiberglass (FRP) Finished: 2 parts with reveal Diameters from 4 to 36 f) ZeamentTM # g) StoneMoldTM # h) Stainless Steel Diameter = to cover Interior Grade T4 or Exterior Grade T316 Number of Reveals 2 or 4 Finish: Brushed or Mirror Company: Ship to: Fluted Concave Reeded Convex NeoPlasterTM ZeamentTM StoneMoldTM Stainless all have reveal Phone Columns Page 11

6 Standard Smooth Cylinders ArchPolymerTM PolyCompTM Load Bearing, Decoratives= NeoPlasterTM, Fiberglass StoneMoldTM, ZeamentTM,Stainless Steel 9 Feet (2.74m) Material O/D I/D Load 4 Feet (1.2m) Material O/D I/D Load IPCYL0906 Decoratives 6 (15.2cm) 3 (7.62cm) No IPCYL410P Hardwoods 10 (25.4cm) 7 (17.7cm) No IPCYL0908PC PolyCompTM 7-5/8 (19.3) 6-7/8 (17.4) 10,000 lbs IPCYL0908 Decoratives 8 (20.3cm) 5 (12.7cm) No 5 Feet (1.5m) Material O/D I/D Load IPCYL0910PC PolyCompTM 9-5/8 (24.4) 8-7/8 (22.4) 14,000 lbs IPCYL510P Hardwoods 10 (25.4cm) 7 (17.7cm) No IPCYL0912PC PolyCompTM 11-3/4 (29.8) 11 (27.9cm) 18,000 lbs IPCYL0914PC PolyCompTM 13-3/4 (34.9) 13 (33cm) 20,000 lbs 6 Feet (1.8m) Material O/D I/D Load IPCYL0916PC PolyCompTM 15-3/4 (40) 12-3/4 (32.3) 20,000 lbs IPCYL610P Hardwoods 10 (25.4cm) 7 (17.7cm) No IPCYL0918PC PolyCompTM 17-5/8 (44.7) 16-5/8 (42) 20,000 lbs IPCYL0920PC PolyCompTM 19-7/8 (50.4) 18-7/8 ( ,000 lbs 7 Feet (2.1m) Material O/D I/D Load IPCYL0924PC PolyCompTM 23-7/8 (60.6) 22-7/8 (58.1) 20,000 lbs IPCYL0926 Decoratives 26 (66cm) 23 (58.4cm) No IPCYL0760 Decoratives 60 (1.52m) 57 (144.7cm) No IPCYL0928 Decoratives 28 (71.12cm) 25 (63.5cm) No IPCYL0930 Decoratives 30 (76.2cm) 27 (68.5cm) No 8 Feet (2.4m) Material O/D I/D Load IPCYL0950 Decoratives 50 (127cm) 47 (11.9cm) No IPCYL0806 Decoratives 6 (15.2cm) 3 (7.6cm) No IPCYL0952 Decoratives 52 (132cm) 49 (124.4cm) No IPCYL0806AP ArchPolymerTM 6 (15.2cm) 3-1/2 (8.8cm) No IPCYL0964 Decoratives 64 (162.5cm) 61 (15.4cm) No IPCYL0808PC PolyCompTM 7-5/8 (19.3) 6-7/8 (17.4) 10,000lbs IPCYL0808 Decoratives 8 (20.3cm) 5 (12.7cm) No IPCYL0808AP ArchPolymerTM 8 (20.3cm) 5-1/2 (8.8cm) No IPCYL808P Hardwoods 8 (20.3cm) 5 (12.7cm) No IPCYL0810PC PolyCompTM 9-5/8 (24.4) 8-7/8 (22.4) 14,000lbs IPCYL0810 Decoratives 10 (25.4cm) 7 (17.7cm) No IPCYL810P Hardwoods 10 (25.4cm) 7 (17.7cm) No IPCYL0810AP ArchPolymerTM 10 (25.4cm) 7-1/2 (19cm) No IPCYL0812PC PolyCompTM 11-3/4 ( (27.9) 18,000lbs IPCYL0812 Decoratives 12 (30.4cm) 9 (22.8cm) No IPCYL0812AP ArchPolymerTM 12 (30.4cm) 9-1/2 (24.1cm) No IPCYL0813 Decoratives 13 (33cm) 10 (25.4cm) No IPCYL0814PC PolyCompTM 13-3/4 (34.9) 13 (33cm) 20,000lbs IPCYL0814 Decoratives 14 (33cm) 11 (27.9cm) No IPCYL0814AP ArchPolymerTM 14-1/8 (35.8)11-1/8 (28.2) No IPCYL0815 Decoratives 15 (38.1cm) 12 (30.4cm) No IPCYL0816PC PolyCompTM 15-3/4 (40) 12-3/4 (32) 20,000lbs IPCYL0816 Decoratives 16 (40.6cm) 13 (33cm) No IPCYL0818PC PolyCompTM 17-5/8 (44.7) 16-5/8 (42) 20,000lbs IPCYL0818 Decoratives 18 (45.7cm) 15 (38.1cm) No IPCYL0819 Decoratives 19 (48.2cm) 16 (40.6cm) No IPCYL0820 Decoratives 20 (50.8cm) 17 (43.1cm) No IPCYL0821 Decoratives 21 (53.3cm) 18 (45.7cm) No IPCYL0822 Decoratives 22 (55.8cm) 19 (48.2cm) No IPCYL0823 Decoratives 23 (58.4cm) 20 (50.8cm) No IPCYL0824 Decoratives 24 (60.9cm) 21 (53.3cm) No IPCYL0826 Decoratives 26 (66cm) 23 (58.4cm) No IPCYL0827 Decoratives 27 (68.5cm) 24 (60.9cm) No IPCYL0828 Decoratives 28 (71.1cm) 25 (63.5cm) No IPCYL0829 Decoratives 29 (73.6cm) 26 (66cm) No IPCYL0830 Decoratives 30 (76.2cm) 27 (68.5cm) No IPCYL0832 Decoratives 32 (76.2cm) 29 (73.6cm) No IPCYL0833 Decoratives 33 (83.8cm) 30 (76.2cm) No IPCYL0834 Decoratives 34 (86.3cm) 31 (78.7cm) No IPCYL0835 Decoratives 35 (88.9cm) 32 (81.2cm) No IPCYL0836 Decoratives 36 (91.4cm) 33 (83.8cm) No IPCYL0838 Decoratives 38 (96.5cm) 35 (88.9cm) No IPCYL0840 Decoratives 40 (101.6cm) 37 (93.9cm) No IPCYL0842 Decoratives 42 (106.6cm) 39 (99cm) No IPCYL0844 Decoratives 44 (111.7cm) 41 (104cm) No IPCYL0848 Decoratives 48 (121.9cm) 45 (114.3cm) No IPCYL0864 Decoratives 64 (162.5cm) 61 (154.9cm) No * All prices & specifications subject to change without notice 10 Feet (3.04m) Material O/D I/D Load IPCYL1006 Decoratives 6 (15.2cm) 3 (7.62cm) No IPCYL1006AP ArchPolymerTM 6 (15.2cm) 3-1/2 (8.8cm) No IPCYL1008 Decoratives 8 (20.3cm) 5 (12.7cm) No IPCYL1008PC PolyCompTM 7-5/8 (19.3) 6-7/8 (17.4) 10,000 lbs IPCYL1008AP ArchPolymerTM 8 (20.3cm) 5-1/2 (8.8cm) No IPCYL1010 Decoratives 8 (20.3cm) 7 (17.7cm) No IPCYL1010PC PolyCompTM 9-5/8 (24.4) 8-7/8 (22.4) 14,000 lbs IPCYL1010AP ArchPolymerTM 10 (25.4) 7-1/2 (19cm) No IPCYL1012PC PolyCompTM 11-3/4 (29.8) 11 (27.9cm)18,000 lbs IPCYL1012 Decoratives 12 (30.4cm) 9 (22.8cm) No IPCYL1012AP ArchPolymerTM 12 (30.4cm) 9-1/2 (24.1) No IPCYL1013 Decoratives 13 (33cm) 10 (25.4cm) No IPCYL1014PC PolyCompTM 13-3/4 (34.9) 13 (33cm) 20,000 lbs IPCYL1014 Decoratives 14 (33cm) 11 (27.9) No IPCYL1014AP ArchPolymerTM 14-1/8 (35.8) 11-1/8 (28.2cm) No IPCYL1015 Decoratives 15 (38.1cm) 12 (30.48cm) No IPCYL1016 Decoratives 16 (40.6cm) 13 (33cm) No IPCYL1018 Decoratives 18 (45.7cm) 15 (38.1cm) No IPCYL1019 Decoratives 19 (48.2cm) 16 (40.6cm) No IPCYL1020 Decoratives 20 (50.8cm) 17 (43.1cm) No IPCYL1020PC PolyCompTM 20 (50.8cm) 17 (43.1) 20,000 lbs IPCYL1021 Decoratives 21 (53.3cm) 18 (45.7cm) No IPCYL1022 Decoratives 22 (55.8cm) 19 (48.2cm) No IPCYL1023 Decoratives 23 (58.4cm) 20 (50.8cm) No IPCYL1024 Decoratives 24 (60.9cm) 21 (53.3cm) No IPCYL1026 Decoratives 26 (66cm) 23 (58.4cm) No IPCYL1027 Decoratives 27 (68.5cm) 24 (60.9cm) No IPCYL1028 Decoratives 28 (71.1cm) 25 (63.5cm) No IPCYL1029 Decoratives 29 (73.6cm) 26 (66cm) No IPCYL1030 Decoratives 30 (76.2cm) 27 (68.58cm) No IPCYL1032 Decoratives 32 (76.2cm) 29 (73.6cm) No IPCYL1033 Decoratives 33 (83.8cm) 30 (76.2cm) No IPCYL1034 Decoratives 34 (86.3cm) 31 (78.7cm) No IPCYL1035 Decoratives 35 (88.9cm) 32 (81.2cm) No IPCYL1036 Decoratives 36 (91.4cm) 33 (83.8cm) No IPCYL1038 Decoratives 38 (96.5cm) 35 (88.9cm) No IPCYL1040 Decoratives 40 (101.6cm) 37 (93.9cm) No IPCYL1042 Decoratives 42 (106.6cm) 39 (99cm) No IPCYL1044 Decoratives 44 (111.7cm) 41 (104cm) No IPCYL1048 Decoratives 48 (121.9cm) 45 (114.3cm) No IPCYL1064 Decoratives 64 (162.5cm) 61 (154.9cm) No Columns Page 12

ArchPolymerTM PolyCompTM Load Bearing, Decoratives= NeoPlasterTM, Fiberglass StoneMoldTM, ZeamentTM Stainless Steel Standard Smooth Cylinders 12 Feet (3.

7 ArchPolymerTM PolyCompTM Load Bearing, Decoratives= NeoPlasterTM, Fiberglass StoneMoldTM, ZeamentTM Stainless Steel Standard Smooth Cylinders 12 Feet (3.65m) Material O/D I/D Load lbs IPCYL1206 Decoratives 6 (15.2cm) 3 (7.62cm) IPCYL1206AP ArchPolymerTM 6 (15.2cm) 3-1/2 (8.8cm) IPCYL1208 Decoratives 8 (20.3cm) 5 (12.7cm) IPCYL1208AP ArchPolymerTM 8 (20.3cm) 5-1/2 (8.8cm) IPCYL1210 Decoratives 8 (20.3cm) 7 (17.7cm) IPCYL1210PC PolyCompTM 9-5/8 (24.4) 8-7/8 (22.4) 14,000 IPCYL1210AP ArchPolymerTM 10 (25.4cm) 7-1/2 (19cm) IPCYL1212PC PolyCompTM 11-3/4 (29.8) 11 (27.9) 18,000 IPCYL1212 Decoratives 12 (30.4cm) 9 (22.8cm) IPCYL1212AP ArchPolymerTM 12 (30.4cm) 9-1/2 (24.1cm) IPCYL1213 Decoratives 13 (33cm) 10 (25.4cm) IPCYL1214PC PolyCompTM 13-3/4 (34.9) 13 (33cm) 20,000 IPCYL1214 Decoratives 14 (33cm) 11 (27.9cm) IPCYL1214AP ArchPolymerTM 14-1/8 (35.8) 11-1/8 (28.2) IPCYL1216 Decoratives 16 (40.6cm) 13 (33cm) IPCYL1218 Decoratives 18 (45.7cm) 15 (38.1cm) IPCYL1220 Decoratives 20 (50.8cm) 17 (43.1cm) IPCYL1221 Decoratives 21 (53.3cm) 18 (45.7cm) IPCYL1222 Decoratives 22 (55.8cm) 19 (48.2cm) IPCYL1223 Decoratives 23 (58.4cm) 20 (50.8cm) IPCYL1224 Decoratives 24 (60.9cm) 21 (53.3cm) IPCYL1226 Decoratives 26 (66cm) 23 (58.4cm) IPCYL1227 Decoratives 27 (68.5cm) 24 (60.9cm) IPCYL1228 Decoratives 28 (71.12cm) 25 (63.5cm) IPCYL1229 Decoratives 29 (73.6cm) 26 (66cm) IPCYL1230 Decoratives 30 (76.2cm) 27 (68.58cm) IPCYL1232 Decoratives 32 (76.2cm) 29 (73.6cm) IPCYL1233 Decoratives 33 (83.8cm) 30 (76.2cm) IPCYL1234 Decoratives 34 (86.3cm) 31 (78.7cm) IPCYL1235 Decoratives 35 (88.9cm) 32 (81.2cm) IPCYL1236 Decoratives 36 (91.44cm) 33 (83.82cm) 14 Feet (4.267m) Material O/D I/D Load lbs IPCYL1412PC PolyCompTM 11-3/4 (29.8) 11 (27.9) 18,000 IPCYL1414PC PolyCompTM 13-3/4 (34.9) 13 (33) 20, Feet (4.87m) Material O/D I/D Load lbs IPCYL1612PC PolyCompTM 11-3/4 (29.8) 11 (27.9) 18,000 IPCYL1614PC PolyCompTM 13-3/4 (34.9) 13 (33) 20,000 Custom Reeded Cylinders Provide Measurements for a Quote Standard Fluted Cylinders 4 Feet (1.2m) Material O/D I/D IPCYL406F12 Hardwoods 6 (15.2cm) 3 (7.62cm) IPCYL408F12 Hardwoods 8 (20.3cm) 5 (12.7cm) IPCYL410F12 Hardwoods 10 (25.4cm) 7 (17.7cm) 5 Feet (1.5m) Material O/D I/D IPCYL508F12 Hardwoods 8 (20.3cm) 5 (12.7cm) IPCYL510F12 Hardwoods 10 (25.4cm) 7 (17.7cm) 6 Feet (1.8m) Material O/D I/D IPCYL608F12 Hardwoods 8 (20.3cm) 5 (12.7cm) IPCYL610F12 Hardwoods 10 (25.4cm) 7 (17.7cm) 8 Feet (2.4m) Material O/D I/D Load IPCYL808F12 Hardwoods 8 (20.3cm) 5 (12.7cm) No IPCYL0808FAP ArchPolymerTM 8-1/8 (20.6) 5-1/8 (13cm) No IPCYL810F12 Hardwoods 10 (25.4cm) 7 (17.7cm) No IPCYL0810FAP ArchPolymerTM 9-7/8 (25cm) 7-3/8 (18.7) No IPCYL0812FAP ArchPolymerTM 11-7/8 (30cm) 9-3/8 (23.8) No IPCYL0814FAP ArchPolymerTM 14-1/8 (35.8) 11-1/8 (28.2) No 9 Feet (2.74m) Material O/D I/D Load IPCYL908F12 Hardwoods 8 (20.3cm) 5 (12.7cm) No IPCYL910F12 Hardwoods 10 (25.4cm) 7 (17.7cm) No 10 Feet (3.04m) Material O/D I/D Load IPCYL1008FAP ArchPolymerTM 8 (20.3cm) 5-1/2 (8.89cm) No IPCYL1010FAP ArchPolymerTM 9-7/8 (25) 7-3/8 (18.7cm) No IPCYL1012FAP ArchPolymerTM 11-7/8 (30) 9-3/8 (23.8cm) No IPCYL1014FAP ArchPolymerTM 14-1/8 (35.8)11-1/8 (28.2cm) No 12 Feet (3.65m) Material O/D I/D Load IPCYL1208FAP ArchPolymerTM 8 (20.3cm) 5-1/2 (8.89cm) No IPCYL1210FAP ArchPolymerTM 9-7/8 (25) 7-3/8 (18.7cm) No IPCYL1212FAP ArchPolymerTM 11-7/8 (30) 9-3/8 (23.8cm) No IPCYL1214FAP ArchPolymerTM 14-1/8 (35.8) 11-1/8 (28.2cm) No IPCYL1216F Decoratives 16 (40.6cm) 13 (33cm) No IPCYL1222F Decoratives 22 (55.8cm) 19 (48.2cm) No IPCYL1230F Decoratives 30 (76.2cm) 27 (68.58cm) No Brochures architectural-source.com * For load bearing columns confirm with your structural engineer * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 13

Ropes & Spirals Unfinished Ropes 24 Hardwoods (Custom Sizes Interior/Exterior) Hand Crafted Custom heights & diameters Multi-Part Order Whole or

17cm) Stain Grade: AmPoplar, Maple, Sap Maple, Basswood, Ash, Birch, Red Oak, White Oak, African Mahogany, SAmerican Mahogany, Beech, Alder, Cherry,

81cm) Exterior: White Pine, Knotty Pine, Clear Pine, Western Red Cedar Atlanta Carousel ArchPolymerTM (Interior / Exterior Composite) Hi-density

Cuts like wood and can be split for post wrap or pilaster application. No customization.

Lite weight 2-3lbs / SqFoot. Weather resistant for earthquake and hurricane zones. Meets ASTM-E84 Fire rating.

NeoPlasterTM (GRG - Interior Composite) Alpha gypsum, cement, water, re-enforced with glass fibers. Lite weight 2-3 lbs per square foot.

resistant fibers, aggregates, polymer adhesives & water. Smooth, internally pigmented 12 colors. Sandblasted for Stone look.

8 Ropes & Spirals Unfinished Ropes 24 Hardwoods (Custom Sizes Interior/Exterior) Hand Crafted Custom heights & diameters Multi-Part Order Whole or Split for Pilaster / Post Wrap Joins every 77 (195.5cm) Interior: Fingerjoint Pine (Paint only) wall thickness 1-1/4 (3.17cm) Stain Grade: AmPoplar, Maple, Sap Maple, Basswood, Ash, Birch, Red Oak, White Oak, African Mahogany, SAmerican Mahogany, Beech, Alder, Cherry, Walnut Wall thickness 1-1/2 (3.81cm) Exterior: White Pine, Knotty Pine, Clear Pine, Western Red Cedar Atlanta Carousel ArchPolymerTM (Interior / Exterior Composite) Hi-density polyurethane with consistency of white pine, primed white. Water, rot, insect resistant. Cuts like wood and can be split for post wrap or pilaster application. No customization. Unfinished Composites Casino French Country San Francisco Fiberglass (FRP - Interior / Exterior Composite) Gelcoat, polyester resin & glass fibers. Lite weight 2-3lbs / SqFoot. Weather resistant for earthquake and hurricane zones. Meets ASTM-E84 Fire rating. Water resistant for fountains & water displays. Mold in 2 pieces, Bondo seam. No customization, cut to height. NeoPlasterTM (GRG - Interior Composite) Alpha gypsum, cement, water, re-enforced with glass fibers. Lite weight 2-3 lbs per square foot. Meets ASTM-E84 Fire rated. Odorless and emission free. Interior use only in dry areas. Made in a mold in 2 pieces, tape & mud seam. No customization, cut to height. Swiss Wood as final product or as plug for custom molds Finished Composites ZeamentTM Exterior Composite Lite weight Portland cement, sand, alkali resistant fibers, aggregates, polymer adhesives & water. Smooth, internally pigmented 12 colors. Sandblasted for Stone look. Exterior Use, Hurricane, earthquake zones, can be submerged in water. Meets ASTM- E84 Fire rating. Oderless & emission free safe for indoor use. Made with natural raw materials can experience light variation in color and texture. Molded in 2 parts - Seam remains as a reveal. Left & Right Rope * All specifications subject to change without notice StoneMoldTM Interior Composite Molded stone: Alpha gypsum, pigment, aggregates, water & polymers. Looks like natural stone. Weight 2-5 lbs/foot. Sealed with a clear finish. Made with natural raw materials and may experience slight variation in color and texture. Molded in 2 Parts - Seam remains as a reveal. Columns Page 14

Custom: Rope Column (Full & Half) 1) Usage: Interior Exterior 2) How many Whole

Pilasters (up against wall) 5) Materials: a) Type of Wood: b) ArchPolymerTM c)

include all parts A) Cylinder B) Rounds Only A: Square Capital: Yes / None Width

/ French Country / Swiss Casino / Carousel / San Francisco Shaft Diameter Top &

Attic < A < B <C D: Round Base: Yes / None Bevel on the round Yes / No Diameter

9 Custom: Rope Column (Full & Half) 1) Usage: Interior Exterior 2) How many Whole Columns 3) How many Split for Post Wrap Size of Post to Wrap 4) How many Split for Pilasters (up against wall) 5) Materials: a) Type of Wood: b) ArchPolymerTM c) NeoPlasterTM(GRG) d) Fiberglass e) ZeamentTM f) StoneMoldTM 6) Total Height include all parts A) Cylinder B) Rounds Only A: Square Capital: Yes / None Width Depth Height B: Round Capital: Yes / None Diameter Height C: Shaft Style: Atlanta / French Country / Swiss Casino / Carousel / San Francisco Shaft Diameter Top & Bottom Left or Right Twists C) Square Only D) Round & Square Base Style: Tuscan Attic < A < B <C D: Round Base: Yes / None Bevel on the round Yes / No Diameter Height <D <E E: Square Base: Yes / None Bevel on the Square Yes / No Width Depth Height Columns Page 15

Standard Rope Cylinders 3 Feet (91.44cm) Diameter IPC304SP 4 (10.16cm) IPC305SP 5 (12.7cm) IPC306SP 6 (15.2cm) IPC308SP 8 (20.3cm) IPC310SP 10 (25.4cm) IPC312SP 11-3/4 (29.8cm) 4 Feet (1.

10 Standard Rope Cylinders 3 Feet (91.44cm) Diameter IPC304SP 4 (10.16cm) IPC305SP 5 (12.7cm) IPC306SP 6 (15.2cm) IPC308SP 8 (20.3cm) IPC310SP 10 (25.4cm) IPC312SP 11-3/4 (29.8cm) 4 Feet (1.2m) Diameter IPC404SP 4 (10.16cm) IPC405SP 5 (12.7cm) IPC406SP 6 (15.24cm) IPC408SP 8 (20.3cm) IPC410SP 10 (25.4cm) IPC412SP 11-3/4 (29.8cm) 5 Feet (1.52m) Diameter IPC504SP 4 (10.16cm) IPC505SP 5 (12.7cm) IPC506SP 6 (15.24cm) IPC508SP 8 (20.3cm) IPC510SP 10 (25.4cm) IPC512SP 11-3/4 (29.8cm) 6 Feet (1.82m) Diameter IPC604SP 4 (10.16cm) IPC605SP 5 (12.7cm) IPC606SP 6 (15.24cm) IPC608SP 8 (20.3cm) IPC610SP 10 (25.4cm) IPC612SP 11-3/4 (29.8cm) 7 Feet (2.13m) Diameter IPC706SP 6 (15.24cm) IPC708SP 8 (20.3cm) IPC710SP 10 (25.4cm) IPC712SP 11-3/4 (29.8cm) 8 Feet (2.438m) Diameter IPC806SP 6 (15.24cm) IPC808SP 8 (20.3cm) IPC810SP 10 (25.4cm) IPC812SP 11-3/4 (29.8cm) 9 Feet (2.7m) Diameter IPC906SP 6 (15.24cm) IPC908SP 8 (20.3cm) IPC910SP 10 (25.4cm) IPC912SP 11-3/4 (29.8cm) 10 Feet (3.04m) Diameter IPC1006SP 6 (15.24cm) IPC1008SP 8 (20.3cm) IPC1010SP 10 (25.4cm) IPC1012SP 11-3/4 (29.8cm) 12 Feet (3.65m) Diameter IPC1206SP 6 (15.24cm) IPC1208SP 8 (20.3cm) IPC1210SP 10 (25.4cm) IPC1212SP 11-3/4 (29.8cm) Rope with Round Cap-Base 3 Feet (91.44cm) Diameter IPC304SP-SCSB 4 (10.16cm) IPC305SP-SCSB 5 (12.7cm) IPC306SP-SCSB 6 (15.24cm) IPC308SP-SCSB 8 (20.3cm) IPC310SP-SCSB 10 (25.4cm) IPC312SP-SCSB 11-3/4 (29.8) 4 Feet (1.2m) Diameter IPC404SP-SCSB 4 (10.16cm) IPC405SP-SCSB 5 (12.7cm) IPC406SP-SCSB 6 (15.24cm) IPC408SP-SCSB 8 (20.3cm) IPC410SP-SCSB 10 (25.4cm) IPC412SP-SCSB 11-3/4 (29.8) 5 Feet (1.524m) Diameter IPC504SP-SCSB 4 (10.16cm) IPC505SP-SCSB 5 (12.7cm) IPC506SP-SCSB 6 (15.24cm) IPC508SP-SCSB 8 (20.3cm) IPC510SP-SCSB 10 (25.4cm) IPC512SP-SCSB 11-3/4 (29.8) 6 Feet (1.82m) Diameter IPC604SP-SCSB 4 (10.16cm) IPC605SP-SCSB 5 (12.7cm) IPC606SP-SCSB 6 (15.24cm) IPC608SP-SCSB 8 (20.3cm) IPC610SP-SCSB 10 (25.4cm) IPC612SP-SCSB 11-3/4 (29.8) 7 Feet (2.13m) Diameter IPC706SP-SCSB 6 (15.24cm) IPC708SP-SCSB 8 (20.3cm) IPC710SP-SCSB 10 (25.4cm) IPC712SP-SCSB 11-3/4 (29.8) 8 Feet (2.438m) Diameter IPC806SP-SCSB 6 (15.24cm) IPC808SP-SCSB 8 (20.3cm) IPC810SP-SCSB 10 (25.4cm) IPC812SP-SCSB 11-3/4 (29.8) 9 Feet (2.7m) Diameter IPC906SP-SCSB 6 (15.24cm) IPC908SP-SCSB 8 (20.3cm) IPC910SP-SCSB 10 (25.4cm) IPC912SP-SCSB 11-3/4 (29.8) 10 Feet (3.04m) Diameter IPC1006SP-SCSB 6 (15.24cm) IPC1008SP-SCSB 8 (20.3cm) IPC1010SP-SCSB 10 (25.4cm) IPC1012SP-SCSB 11-3/4 (29.8) 12 Feet (3.65m) Diameter IPC1206SP-SCSB 6 (15.24cm) IPC1208SP-SCSB 8 (20.3cm) IPC1210SP-SCSB 10 (25.4cm) IPC1212SP-SCSB 11-3/4 (29.8) Material: 24 Hardwoods, Custom Sizes Available, Note: joins every 77 (195.5cm) Composites Made from Molds, NeoPlaster-GRG, Fiberglass, StoneMoldTM, ZeamentTM Available Styles: Atlanta, Carousel, Casino, French Country, Swiss, SanFrancisco * All prices & specifications subject to change without notice, Final products & Measurements may vary from on line brochures Columns Page 16

STANDARD: Tuscan Capitals & Base 3 Feet (91.44cm) Diameter IPC304SP-TCTB 4 (10.1cm) IPC305SP-TCTB 5 (12.7cm) IPC306SP-TCTB 6 (15.2cm) IPC308SP-TCTB 8 (20.3cm) IPC310SP-TCTB 10 (25.

4cm) IPC412SP-TCTB 11-3/4 (29.8) 5 Feet (1.52m) Diameter IPC504SP-TCTB 4 (10.1cm) IPC505SP-TCTB 5 (12.7cm) IPC506SP-TCTB 6 (15.2cm) IPC508SP-TCTB 8 (20.3cm) IPC510SP-TCTB 10 (25.

4cm) IPC612SP-TCTB 11-3/4 (29.8) 7 Feet (2.13m) Diameter IPC706SP-TCTB 6 (15.2cm) IPC708SP-TCTB 8 (20.3cm) IPC710SP-TCTB 10 (25.4cm) IPC712SP-TCTB 11-3/4 (29.8) 8 Feet (2.

3cm) IPC910SP-TCTB 10 (25.4cm) IPC912SP-TCTB 11-3/4 (29.8) 10 Feet (3.04m) Diameter IPC1006SP-TCTB 6 (15.2cm) IPC1008SP-TCTB 8 (20.3cm) IPC1010SP-TCTB 10 (25.4cm) IPC1012SP-TCTB 11-3/4 (29.

11 STANDARD: Tuscan Capitals & Base 3 Feet (91.44cm) Diameter IPC304SP-TCTB 4 (10.1cm) IPC305SP-TCTB 5 (12.7cm) IPC306SP-TCTB 6 (15.2cm) IPC308SP-TCTB 8 (20.3cm) IPC310SP-TCTB 10 (25.4cm) IPC312SP-TCTB 11-3/4(29.8) 4 Feet (1.2m) Diameter IPC404SP-TCTB 4 (10.1cm) IPC405SP-TCTB 5 (12.7cm) IPC406SP-TCTB 6 (15.2cm) IPC408SP-TCTB 8 (20.3cm) IPC410SP-TCTB 10 (25.4cm) IPC412SP-TCTB 11-3/4 (29.8) 5 Feet (1.52m) Diameter IPC504SP-TCTB 4 (10.1cm) IPC505SP-TCTB 5 (12.7cm) IPC506SP-TCTB 6 (15.2cm) IPC508SP-TCTB 8 (20.3cm) IPC510SP-TCTB 10 (25.4cm) IPC512SP-TCTB 11-3/4 (29.8) 6 Feet (1.82m) Diameter IPC604SP-TCTB 4 (10.1cm) IPC605SP-TCTB 5 (12.7cm) IPC606SP-TCTB 6 (15.2cm) IPC608SP-TCTB 8 (20.3cm) IPC610SP-TCTB 10 (25.4cm) IPC612SP-TCTB 11-3/4 (29.8) 7 Feet (2.13m) Diameter IPC706SP-TCTB 6 (15.2cm) IPC708SP-TCTB 8 (20.3cm) IPC710SP-TCTB 10 (25.4cm) IPC712SP-TCTB 11-3/4 (29.8) 8 Feet (2.438m) Diameter IPC806SP-TCTB 6 (15.2cm) IPC808SP-TCTB 8 (20.3cm) IPC810SP-TCTB 10 (25.4cm) IPC812SP-TCTB 11-3/4 (29.8) 9 Feet (2.7m) Diameter IPC906SP-TCTB 6 (15.2cm) IPC908SP-TCTB 8 (20.3cm) IPC910SP-TCTB 10 (25.4cm) IPC912SP-TCTB 11-3/4 (29.8) 10 Feet (3.04m) Diameter IPC1006SP-TCTB 6 (15.2cm) IPC1008SP-TCTB 8 (20.3cm) IPC1010SP-TCTB 10 (25.4cm) IPC1012SP-TCTB 11-3/4 (29.8) 12 Feet (3.65m) Diameter IPC1206SP-TCTB 6 (15.2cm) IPC1208SP-TCTB 8 (20.3cm) IPC1210SP-TCTB 10 (25.4cm) IPC1212SP-TCTB 11-3/4 (29.8) UPGRADE: Tuscan Cap & AtticBase 3 Feet (91.44cm) Diameter IPC304SP-TCAB 4 (10.1cm) IPC305SP-TCAB 5 (12.7cm) IPC306SP-TCAB 6 (15.2cm) IPC308SP-TCAB 8 (20.3cm) IPC310SP-TCAB 10 (25.4cm) IPC312SP-TCAB 11-3/4 (29.8) 4 Feet (1.2m) Diameter IPC404SP-TCAB 4 (10.1cm) IPC405SP-TCAB 5 (12.7cm) IPC406SP-TCAB 6 (15.2cm) IPC408SP-TCAB 8 (20.3cm) IPC410SP-TCAB 10 (25.4cm) IPC412SP-TCAB 11-3/4 (29.8) 5 Feet (1.52m) Diameter IPC504SP-TCAB 4 (10.1cm) IPC505SP-TCAB 5 (12.7cm) IPC506SP-TCAB 6 (15.2cm) IPC508SP-TCAB 8 (20.3cm) IPC510SP-TCAB 10 (25.4cm) IPC512SP-TCAB 11-3/4 (29.8) 6 Feet (1.82m) Diameter IPC604SP-TCAB 4 (10.1cm) IPC605SP-TCAB 5 (12.7cm) IPC606SP-TCAB 6 (15.24cm) IPC608SP-TCAB 8 (20.3cm) IPC610SP-TCAB 10 (25.4cm) IPC612SP-TCAB 11-3/4 (29.8) 7 Feet (2.13m) Diameter IPC706SP-TCAB 6 (15.2cm) IPC708SP-TCAB 8 (20.3cm) IPC710SP-TCAB 10 (25.4cm) IPC712SP-TCAB 11-3/4 (29.8) 8 Feet (2.438m) Diameter IPC806SP-TCAB 6 (15.24cm) IPC808SP-TCAB 8 (20.3cm) IPC810SP-TCAB 10 (25.4cm) IPC812SP-TCAB 11-3/4 (29.8) 9 Feet (2.7m) Diameter IPC906SP-TCAB 6 (15.2cm) IPC908SP-TCAB 8 (20.3cm) IPC910SP-TCAB 10 (25.4cm) IPC912SP-TCAB 11-3/4 (29.8) 10 Feet (3.04m) Diameter IPC1006SP-TCAB 6 (15.2cm) IPC1008SP-TCAB 8 (20.3cm) IPC1010SP-TCAB 10 (25.4cm) IPC1012SP-TCAB 11-3/4 (29.8) 12 Feet (3.65m) Diameter IPC1206SP-TCAB 6 (15.2cm) IPC1208SP-TCAB 8 (20.3cm) IPC1210SP-TCAB 10 (25.4cm) IPC1212SP-TCAB 11-3/4 (29.8) Atlanta Casino French Country Swiss Carousel San Francisco * All prices & specifications subject to change without notice, Final products & Measurements may vary from on line brochures Columns Page 17

Tuscan Style <= Square Abacus <= Round Echinus <= Top Ring <= Neck (Top Shaft) <= Astragal <= Bottom Shaft <= Round Torus <= Square Plinth Unfinished Materials 24 Hardwoods (Custom Sizes

17cm) Stain Grade: AmPoplar, Maple, Sap Maple, Basswood, Ash, Birch, Red Oak, White Oak, African Mahogany, Beech, Alder, Cherry, Walnut Wall thickness 1-1/2 (3.

12 Tuscan Style <= Square Abacus <= Round Echinus <= Top Ring <= Neck (Top Shaft) <= Astragal <= Bottom Shaft <= Round Torus <= Square Plinth Unfinished Materials 24 Hardwoods (Custom Sizes Interior/Exterior) Hand Crafted Custom heights & diameters Multi-Part Order Whole or Split for Pilaster / Post Wrap Interior: Fingerjoint Pine (Paint only) wall thickness 1-1/4 (3.17cm) Stain Grade: AmPoplar, Maple, Sap Maple, Basswood, Ash, Birch, Red Oak, White Oak, African Mahogany, Beech, Alder, Cherry, Walnut Wall thickness 1-1/2 (3.81cm) Exterior: White Pine, Knotty Pine, Clear Pine, Western Red Cedar ArchPolymerTM (Interior / Exterior Composite) Hi-density polyurethane with consistency of white pine, primed white. Water, rot, insect resistant. Cuts like wood and can be split for post wrap or pilaster application. No customization. PolyCompTM (Load Bearing Interior / Exterior) 70% calcium carbonate, 5% marble chips, 25% Polyester Resins. Meets ASTM-E84 Fire rated. Order whole or split for post wrap or pilaster. No customization, cut to height. Unfinished Composites Fiberglass (FRP - Interior / Exterior Composite) Gelcoat, polyester resin & glass fibers. Lite weight 2-3lbs / SqFoot. Weather resistant for earthquake and hurricane zones. Meets ASTM-E84 Fire rating. Water resistant for fountains & water displays. Mold in 2 pieces, Bondo seam. No customization, cut to height. NeoPlasterTM (GRG - Interior Composite) Alpha gypsum, cement, water, re-enforced with glass fibers. Lite weight 2-3 lbs per square foot. Meets ASTM-E84 Fire rated. Odorless and emission free. Interior use only in dry areas. Made in a mold in 2 pieces, tape & mud seam. No customization, cut to height. Finished Composites ZeamentTM Exterior Composite Lite weight Portland cement, sand, alkali resistant fibers, aggregates, polymer adhesives & water. Smooth, internally pigmented 12 colors. Sandblasted for Stone look. Exterior Use, Hurricane, earthquake zones, can be submerged in water. Meets ASTM-E84 Fire rating. Oderless & emission free safe for indoor use. Made with natural raw materials can experience light variation in color and texture. Molded in 2 parts - Seam remains as a reveal. StoneMoldTM Interior Composite Molded stone: Alpha gypsum, pigment, aggregates, water & polymers. Looks like natural stone. Weight 2-5 lbs/foot. Sealed with a clear finish. Made with natural raw materials and may experience slight variation in color and texture. Molded in 2 Parts - Seam remains as a reveal. Columns Page 18

Custom Form: Tuscan Hardwood Smooth Full or Half Column A=> B=> D=> F2 => G=> <=C <=E <=F1 <=H 2 Part Capital A = Square (Abacus) Width: Depth: Height: with Bevel or No Bevel B = Round (Echinus)

Yes or No F1 = Top Shaft Diameter F2 = Bottom Shaft Diameter Unfinished Hardwoods Usage: Interior Exterior Hardwood Type OPTIONS How many Whole How many Split for Post Wrap Size of Post to Wrap

13 Custom Form: Tuscan Hardwood Smooth Full or Half Column A=> B=> D=> F2 => G=> <=C <=E <=F1 <=H 2 Part Capital A = Square (Abacus) Width: Depth: Height: with Bevel or No Bevel B = Round (Echinus) Diameter: Height: Shaft C = Top Ring Diameter: Height: D = Necking (Top of Shaft) Diameter: Height: Select (circle) Tapered Entasis Taper Stops 2/3rds down shaft Non Tapered - Straight E = Astragal Yes or No F1 = Top Shaft Diameter F2 = Bottom Shaft Diameter Unfinished Hardwoods Usage: Interior Exterior Hardwood Type OPTIONS How many Whole How many Split for Post Wrap Size of Post to Wrap Engaged Columns: a) Split in half (against wall) How many b) Split Vertically at 3/4 point How many c) Wedged for Outside Corner Load Bearing Option Interior Solid Wood Plug Yes No 2 Part Base G = Round Torus Diameter: Height: Bevel (Cincture) yes / no H = Square Plynth Width: Depth: Height: with Bevel or No Bevel I) Total Height all Parts: Company: Ship to: Phone Columns Page 19

Custom Form: Tuscan Fluted or Reeded Full or Half Column Multi-Part Fluted => C=> E=> (I) => <= A <= B <=D <=J1 <= F1 <=J2 <= F2 <= G <= H Multi-Part Reeded 2 Part Capital A = Square (Abacus) Width:

Height: E = Astragal Yes No J1 = Flat above Flutes Tapered Entasis Taper Stops 2/3rds down shaft Non Tapered - Straight Shaft Diameter F1 = Top F2 = Bottom J2 = Flat below Flutes 2 Part Base G =

14 Custom Form: Tuscan Fluted or Reeded Full or Half Column Multi-Part Fluted => C=> E=> (I) => <= A <= B <=D <=J1 <= F1 <=J2 <= F2 <= G <= H Multi-Part Reeded 2 Part Capital A = Square (Abacus) Width: Depth: Height: with Bevel or No Bevel B = Round (Echinus) Diameter: Height: Shaft (circle below) 12 Flutes / 24 Flutes / Reeded C = Top Ring Diameter: Height: D = Necking (Top of Shaft) Diameter: Height: E = Astragal Yes No J1 = Flat above Flutes Tapered Entasis Taper Stops 2/3rds down shaft Non Tapered - Straight Shaft Diameter F1 = Top F2 = Bottom J2 = Flat below Flutes 2 Part Base G = Round Torus Diameter: Height: Bevel (Cincture) yes / no H = Square Plynth Width: Depth: Height: with Bevel or No Bevel I) Total Height all Parts: Unfinished Hardwoods Usage: Interior Exterior Hardwood Type OPTIONS How many Whole How many Split for Post Wrap Size of Post to Wrap Engaged Columns: a) Split in half (against wall) How many b) Split Vertically at 3/4 point How many c) Wedged for Outside Corner Load Bearing Option Interior Solid Wood Plug Yes No Company: Ship to: Phone Columns Page 20

15 Standard Tuscan Smooth Load Bearing & Decorative HW=24 Hardwoods, AP=ArchPolymerTM, PC=PolyCompTM 4C= Fiberglass, NeoPlasterTM, StoneMoldTM, ZeamentTM 3 FT (91cm) Material Taper Load Top O/D Bot-O/D I/D 6 FT (1.82m) Material Taper Load Top O/D Bot-O/D I/D IPC304P-TCTB IPCNT304P-TCTB IPC305P-TCTB IPCNT305P-TCTB IPC306P-TCTB IPCNT306P-TCTB IPC308P-TCTB HW Yes No 3 4 Solid HW No No 4 4 Solid HW Yes No HW No No HW Yes No HW No No HW Yes No FT (1.2m) Material Taper Load Top O/D Bot-O/D I/D IPC404P-TCTB IPCNT404P-TCTB IPC405P-TCTB IPCNT405P-TCTB IPC406P-TCTB IPCNT406P-TCTB IPC408P-TCTB IPCNT408P-TCTB IPAP0408P-TCTB IPC410P-TCTB IPCNT410P-TCTB IPC412P-TCTB IPCNT412P-TCTB IPC414P-TCTB IPCNT414P-TCTB IPC416P-TCTB IPCNT416P-TCTB HW Yes No 3 4 Solid HW No No 4 4 Solid HW Yes No HW No No HW Yes No HW No No HW Yes No HW No No AP Yes No 7-1/16 7-5/8 4-5/8 HW Yes No HW No No HW Yes No HW No No HW Yes No HW No No HW Yes No HW No No FT (1.52m) Material Taper Load Top O/D Bot-O/D I/D IPC504P-TCTB IPCNT504P-TCTB IPC505P-TCTB IPCNT505P-TCTB IPC506P-TCTB IPCNT506P-TCTB IPC508P-TCTB IPCNT508P-TCTB IPPC508S-TBTC IPAP0508P-TCTB IPC508P-TCTB IPCNT508P-TCTB IPC510P-TCTB IPCNT510P-TCTB IPC512P-TCTB IPCNT512P-TCTB IPC514P-TCTB IPCNT514P-TCTB IPC516P-TCTB IPCNT516P-TCTB HW Yes No 3 4 Solid HW No No 4 4 Solid HW Yes No HW No No HW Yes No HW No No HW Yes No HW No No PC Yes 10,000lbs 6-1/8 7-5/8 5-3/8 AP Yes No 6-5/8 7-5/8 4-5/8 HW Yes No HW No No HW Yes No HW No No HW Yes No HW No No HW Yes No HW No No HW Yes No HW No No FT (1.82m) Material Taper Load Top O/D Bot-O/D I/D IPC604P-TCTB HW Yes No 3 4 Solid IPCNT604P-TCTB HW No No 4 4 Solid IPC605P-TCTB HW Yes No IPCNT605P-TCTB HW No No IPC606P-TCTB IPCNT606P-TCTB IPPC0608S-TBTC IPC608P-TCTB IPCNT608P-TCTB IPPC0610S-TBTC IPC610P-TCTB IPCNT610P-TCTB IPPC0612S-TBTC IPC612P-TCTB IPCNT612P-TCTB IPC614P-TCTB IPCNT614P-TCTB IPC616P-TCTB IPCNT616P-TCTB HW Yes No HW No No PC Yes 10,000 lbs 6-1/8 7-5/8 5-3/8 HW Yes No HW No No PC Yes No 8 9-5/8 7-1/4 HW Yes No HW No No PC Yes No 9-3/8 11-1/2 8-5/8 HW Yes N HW No No HW Yes No HW No No HW Yes No HW No No FT (2.13m) Material Taper Load Top O/D Bot-O/D I/D IPC704P-TCTB IPCNT704P-TCTB IPC706P-TCTB IPCNT706P-TCTB IPC708P-TCTB IPCNT708P-TCTB IPTUS0810-TBTC IPC710P-TCTB IPCNT710P-TCTB IPC712P-TCTB IPCNT712P-TCTB IPC714P-TCTB IPCNT714P-TCTB IPC716P-TCTB IPCNT716P-TCTB 8 FT (2.43m) Material Taper Load Top O/D Bot-O/D I/D IPC804P-TCTB IPPC0806S-TBTC IPC806P-TCTB IPCNT806P-TCTB IPPC0808S-TBTC IPAP0808P-TCTB IPC808P-TCTB IPPC0808SNT-TBTC IPAPNT0808P-TCTB IPCNT808P-TCTB IPPC0810S-TBTC IPC810P-TCTB IPTUS0810-TBTC IPPC0810SNT-TBTC IPCNT810P-TCTB IPAPNT0810P-TCTB PPC0812S-TBTC IPC812P-TCTB IPTUS0812-TBTC HW Yes No 3 4 Solid HW No No 4 4 Solid HW Yes No HW No No HW Yes No HW No No C Yes No 8-1/ /2 HW Yes No HW No No HW Yes No HW No No HW Yes No HW No No HW Yes No HW No No HW Yes No 3 4 Solid PC Yes 10,000lbs 5-1/ /4 HW Yes No HW No No PC Yes 10,000lbs 6-1/8 7-5/8 5-3/8 AP Yes No 6-5/8 7-5/8 5-5/8 HW Yes No PC No 10,000lbs 7-5/8 7-5/8 6-7/8 AP No No /2 HW No No PC Yes 14,000lbs 8 9-5/8 7-1/4 HW Yes No C Yes No 8-1/ /2 PC No 14,000lbs 9-5/8 9-5/8 8-7/8 HW No No AP No No /2 PC Yes 18,000lbs 9-3/8 11-1/2 8-5/8 HW Yes No C Yes No * For load bearing columns confirm with your structural engineer * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 21

16 Standard Tuscan Smooth Load Bearing & Decorative HW=24 Hardwoods, AP=ArchPolymerTM, PC=PolyCompTM 4C= Fiberglass, NeoPlasterTM, StoneMoldTM, ZeamentTM 8 FT (2.43m) Material Taper Load Top O/D Bot-O/D I/D IPPC0812SNT-TBTC PC No 18,000lbs 11-3/4 11-3/4 11 IPCNT812P-TCTB HW No No IPPC0814S-TBTC PC Yes 20,000lbs /8 11-1/4 IPC814P-TCTB HW Yes No IPPC0814SNT-TBTC IPCNT814P-TCTB IPPC0816S-TBTC IPC816P-TCTB IPC0816SNT-TBTC IPPC0818S-TBTC IPPC0818SNT-TBTC IPTUS0820-TBTC 10 FT (3.04m) Material Taper Load Top O/D Bot-O/D I/D IPPC1008S-TBTC IPAP1008P-TCTB IPC1008P-TCTB IPPC1008SNT-TBTC IPAPNT1008P-TCTB IPCNT1008P-TCTB IPPC1010S-TBTC IPC1010P-TCTB IPTUS1010-TBTC PC No 20,000lbs 13-3/4 13-3/4 13 HW No No PC Yes 20,000lbs 13-3/4 15-3/4 12-3/4 HW Yes No PC No 20,000lbs 15-3/4 15-3/4 15-3/4 PC Yes 20,000lbs 15-3/8 17-1/4 14-3/8 PC No 20,000lbs 17-5/8 17-5/8 16-5/8 4C Yes No /2 9 FT (2.74m) Material Taper Load Top O/D Bot-O/D I/D IPPC0908S-TBTC PC Yes 10,000lbs 6-1/8 7-5/8 5-3/8 IPC908P-TCTB HW Yes No IPPC0908SNT-TBTC PC No 10,000lbs 7-5/8 7-5/8 6-7/8 IPCNT908P-TCTB HW No No IPPC0910S-TBTC PC Yes 14,000lbs 8 9-5/8 7-1/4 IPC910P-TCTB HW Yes No IPTUS0910-TBTC 4C Yes No 8-1/ IPPC0910SNT-TBTC IPCNT910P-TCTB IPPC0912S-TBTC IPC912P-TCTB IPTUS0912-TBTC IPPC0912SNT-TBTC IPCNT912P-TCTB IPPC0914S-TBTC IPC914P-TCTB IPPC0914SNT-TBTC IPCNT914P-TCTB IPPC0916S-TBTC IPC916P-TCTB IPCNT916P-TCTB IPPC0916SNT-TBTC IPPC0918S-TBTC IPPC0918SNT-TBTC IPTUS0920-TBTC IPPC0920SNT-TBTC IPTUS0921-TBTC IPPC0924SNT-TBTC PC No 14,000lbs 9-5/8 9-5/8 8-7/8 HW No No PC Yes 18,000lbs 9-1/2 11-1/2 8-3/4 HW Yes No C Yes No /4 PC No 18,000lbs 11-3/4 11-3/4 11 HW No No PC Yes 20,000lbs /8 11-1/4 HW Yes No PC No 20,000lbs 13-3/4 13-3/4 13 HW No No PC Yes 20,000lbs 13-3/4 15-3/4 12-3/4 HW Yes No HW No No PC No 20,000lbs 15-3/4 15-3/4 14-3/4 PC Yes 20,000lbs 15-3/8 17-1/4 14-3/8 PC No 20,000lbs 17-5/8 17-5/8 16-5/8 4C Yes No PC No 20,000lbs 19-7/8 19-7/8 18-7/8 4C Yes No /2 PC No 20,000lbs 23-7/8 23-7/8 22-5/8 PC Yes 10,000lbs 6-1/8 7-5/8 5-3/8 AP Yes No 6-5/8 7-5/8 5-5/8 HW Yes No PC No 10,000lbs 7-5/8 7-5/8 6-7/8 AP No No /2 HW No No PC Yes 14,000lbs 8 9-5/8 7-1/4 HW Yes No C Yes No 8-1/ /2 10 FT (3.04m) Material Taper Load Top O/D Bot-O/D I/D IPPC1008S-TBTC PC Yes 10,000lbs 6-1/8 7-5/8 5-3/8 IPAP1008P-TCTB IPC1008P-TCTB AP Yes No HW Yes No 6-5/ / /8 4 IPPC1008SNT-TBTC PC No 10,000lbs 7-5/8 7-5/8 6-7/8 IPAPNT1008P-TCTB AP No No /2 IPCNT1008P-TCTB HW No No IPPC1010S-TBTC PC Yes 14,000lbs 8 9-5/8 7-1/4 IPC1010P-TCTB IPTUS1010-TBTC HW Yes No 4C Yes No 9 8-1/ /2 IPPC1010SNT-TBTC PC No 14,000lbs 9-5/8 9-5/8 8-7/8 IPCNT1010P-TCTB HW No No IPPC1012S-TBTC PC Yes 18,000lbs 9-1/2 11-1/2 8-3/4 IPC1012P-TCTB IPTUS1012-TBTC HW Yes No 4C Yes No /4 IPPC1012SNT-TBTC PC No 18,000lbs 11-3/4 11-3/4 11 IPCNT1012P-TCTB HW No No IPPC1014S-TBTC PC Yes 20,000lbs /8 11-1/4 IPC1014P-TCTB HW Yes No IPPC1014SNT-TBTC PC No 20,000lbs /4 13 IPCNT1014P-TCTB HW No No IPPC1016S-TBTC PC Yes 20,000lbs 13-3/4 15-3/4 12-3/4 IPC1016P-TCTB IPCNT1016P-TCTB HW Yes No HW No No IPPC1018S-TBTC PC Yes 20,000lbs 15-3/8 17-1/4 14-3/8 IPTUS1020-TBTC 4C Yes No /2 IPPC1020SNT-TBTC PC No 20,000lbs 19-7/8 19-7/8 18-7/8 IPPC1024SNT-TBTC PC No 20,000lbs 23-7/8 23-7/8 22-5/8 12 FT (3.65m) Material Taper Load Top O/D Bot-O/D I/D IPPC1210S-TBTC IPC1210P-TCTB IPTUS1210-TBTC IPPC1210SNT-TBTC IPCNT1210P-TCTB IPPC1212S-TBTC IPC1212P-TCTB IPTUS1212-TBTC IPPC1212SNT-TBTC IPCNT1212P-TCTB IPPC1214S-TBTC IPC1214P-TCTB IPPC1214SNT-TBTC IPPC1216S-TBTC IPC1216P-TCTB IPPC1218S-TBTC IPTUS1218-TBTC IPPC1220S-TBTC IPTUS1220-TBTC PC Yes 14,000lbs 8 9-5/8 7-1/4 HW Yes No C Yes No 8-1/ /2 PC No 14,000lbs 9-5/8 9-5/8 8-7/8 HW No No PC Yes 18,000lbs 9-5/8 11-5/8 8-7/8 HW Yes No C Yes Yes /4 PC No 18,000lbs 11-3/4 11-3/4 11 HW No No PC Yes 20,000lbs /8 11-1/4 HW Yes No PC No 20,000lbs 13-3/4 13-3/4 13 PC Yes 20,000lbs 13-3/4 15-3/4 12-3/4 HW Yes 20,000lbs PC Yes 20,000lbs 15-3/8 17-1/4 14-3/8 4C Yes No PC Yes 20,000lbs 16-3/8 19-3/4 15-5/8 4C Yes No /2 Call for Fiberglass Load Bearing Column Prices * For load bearing columns confirm with your structural engineer * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 22

17 Standard Tuscan Smooth HW=24 Hardwoods, AP=ArchPolymerTM, PC=PolyCompTM 4C= Fiberglass, NeoPlasterTM, StoneMoldTM, ZeamentTM 14 FT (4.26m) Material Taper Load Top O/D Bot-O/D I/D IPPC1412S-TBTC PC Yes 18,000lbs 9-5/8 11-5/8 8-7/8 IPPC1412SNT-TBTC PC No 18,000lbs 11-3/4 11-3/4 11 IPPC1414S-TBTC PC Yes 20,000lbs /4 IPPC1414SNT-TBTC PC No 20,000lbs 13-3/4 13-3/4 13 IPC1414P-TCTB HW Yes No IPCNT1414P-TCTB HW No No IPPC1416P-TBTC PC Yes 20,000lbs 13-3/4 15-3/4 12-3/4 IPPC1418S-TBTC PC Yes 20,000lbs 15-1/4 17-5/8 14-3/8 IPPC1420S-TBTC PC Yes 20,000lbs 16-3/8 19-3/4 15-5/8 IPPC1424S-TBTC PC Yes 20,000lbs 19-3/4 23-3/4 18-3/4 Standard Tuscan Fluted 3 FT (91cm) Material Taper Load Top O/D Bot-O/D I/D IPC304F12-TCTC HW Yes No 3 4 Solid IPC304F24-TCTC HW Yes No 3 4 Solid IPCNT304F12-TCTB HW No No 4 4 Solid IPCNT304F24-TCTB HW No No 4 4 Solid IPC305F12-TCTB HW Yes No IPC305F24-TCTB HW Yes No IPCNT305F12-TCTB HW No No IPC306F12-TCTB HW Yes No IPC306F24-TCTB HW Yes No IPCNT306F12-TCTB HW No No IPCNT306F24-TCTB HW No No FT (4.5m) Material Taper Load Top O/D Bot-O/D I/D 4FT (1.21m) Material Flutes Taper Load T/O/D B/O/D I/D IPTUS1520-TBTC PC Yes No /2 IPC404F12-TCTB HW 12 Yes No 3 4 Solid IPC404F24-TCTB HW 24 Yes No 3 4 Solid 16 FT (4.87m) Material Taper Load Top O/D Bot-O/D I/D IPCNT404F12-TCTB HW 12 No No 4 4 Solid IPPC1612S-TBTC PC Yes 18,000lbs 9-5/8 11-5/8 8-7/8 IPCNT404F24-TCTB HW 24 No Yes 4 4 Solid IPPC1612SNT-TBTC PC No 18,000lbs 11-3/4 11-3/4 11 IPC405F12-TCTB HW 12 Yes No IPPC1614S-TBTC PC Yes 20,000lbs /4 IPC405F24-TCTB HW 24 Yes No IPPC1614SNT-TBTC PC No 20,000lbs 13-3/4 13-3/4 13 IPCNT405F12-TCTB HW 12 No No IPPC1616S-TBTC PC Yes 20,000lbs 13-3/4 15-3/4 12-3/4 IPCNT405F24-TCTB HW 24 No No IPC1618S-TBTC PC Yes 20,000lbs 15-1/4 17-5/8 14-1/4 IPC406F12-TCTB HW 12 Yes No IPPC1620S-TBTC PC Yes 20,000lbs 16-3/8 19-3/4 15-5/8 IPC406F24-TCTB HW 24 Yes No IPPC1624S-TBTC PC Yes 20,000lbs 19-3/4 23-3/4 18-3/4 IPCNT406F24-TCTB HW 24 No No IPC408F12-TCTB HW 12 Yes No IPC408F24-TCTB HW 24 Yes No FT (5.48m) Material Taper Load Top O/D Bot-O/D I/D IPCNT408F12-TCTB HW 12 No No IPPC1814S-TBTC PC Yes 20,000 lbs /4 IPCNT408F24-TCTB HW 24 No No IPC1816S-TBTC PC Yes 20,000 lbs 13-3/4 15-3/4 12-3/4 IPC410F12-TCTB HW 12 Yes No IPPC1818S-TBTC PC Yes 20,000 lbs 15-1/4 17-5/8 14-1/4 IPC410F24-TCTB HW 24 Yes No IPPC1820S-TBTC PC Yes 20,000 lbs 16-3/8 19-3/4 15-5/8 IPCNT410F12-TCTB HW 12 No No IPPC1824S-TBTC PC Yes 20,000 lbs 19-3/4 23-3/4 18-3/4 IPCNT410F24-TCTB HW 24 No No IPC412F12-TCTB HW 12 Yes No IPC412F24-TCTB HW 24 Yes No FT (6.09m) Material Taper Load Top O/D Bot-O/D I/D IPCNT412F12-TCTB HW 12 No No IPCNT412F24-TCTB IPPC2018S-TBTC PC Yes 20,000 lbs 15-1/4 17-5/8 14-1/4 HW 24 No No IPC414F24-TCTB IPPC2020S-TBTC PC Yes 20,000 lbs 16-3/8 19-3/4 15-5/8 HW 24 Yes No IPCNT414F24-TCTB IPPC2024S-TBTC PC Yes 20,000 lbs 19-3/4 23-3/4 18-3/4 HW 24 No No IPC416F24-TCTB HW 24 Yes No FT (6.7m) Material Taper Load Top O/D Bot-O/D I/D 5FT (1.52m) Material Flutes Taper Load T/O/D B/O/D I/D IPPC2220S-TBTC PC Yes 20,000 lbs 16-3/8 19-3/4 15-5/8 IPC504F12-TCTB HW 12 Yes No 3 4 Solid IPPC2224S-TBTC PC Yes 20,000 lbs 19-3/4 23-3/4 18-3/4 IPC504F24-TCTB HW 24 Yes No 3 4 Solid IPCNT504F12-TCTB HW 12 No No 4 4 Solid IPCNT504F24-TCTB HW 24 No No 4 4 Solid 24 FT (7.31m) Material Taper Load Top O/D Bot-O/D I/D IPC505F12-TCTB HW 12 Yes No IPPC2420S-TBTC PC Yes 20,000 lbs 16-3/8 19-3/4 15-5/8 IPC505F24-TCTB HW 24 Yes No IPPC2424S-TBTC PC Yes 20,000 lbs 19-3/4 23-3/4 18-3/4 IPCNT505F12-TCTB HW 12 No No IPCNT505F24-TCTB HW 24 No No IPC506F12-TCTB HW 12 Yes No Call for Fiberglass Load Bearing IPC506F24-TCTB HW 24 Yes No IPCNT506F12-TCTB HW 12 No No Column Prices IPCNT506F24-TCTB HW 24 No No IPC508F12-TCTB HW 12 Yes No * For load bearing columns confirm with your structural engineer IPC508F24-TCTB HW 24 Yes No IPCNT508F12-TCTB HW 12 No No * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 23

18 Standard Tuscan Fluted Load Bearing & Decorative HW=24 Hardwoods, AP=ArchPolymerTM, PC=PolyCompTM 4C= Fiberglass, NeoPlasterTM, StoneMoldTM, ZeamentTM 5FT (1.52m) Material Flutes Taper Load T/O/D B/O/D I/D IPC504F12-TCTB IPC504F24-TCTB IPCNT504F12-TCTB IPCNT504F24-TCTB IPC505F12-TCTB IPC505F24-TCTB IPCNT505F12-TCTB IPCNT505F24-TCTB IPC506F12-TCTB IPC506F24-TCTB IPCNT506F12-TCTB IPCNT506F24-TCTB IPC508F12-TCTB IPC508F24-TCTB IPCNT508F12-TCTB IPCNT508F24-TCTB IPC510F12-TCTB IPC510F24-TCTB IPCNT510F12-TCTB IPCNT510F24-TCTB IPC512F12-TCTB IPC512F24-TCTB IPCNT512F12-TCTB IPCNT512F24-TCTB IPC514F24-TCTB IPCNT514F24-TCTB IPCNT508F24-TCTB HW 12 Yes No 3 4 Solid HW 24 Yes No 3 4 Solid HW 12 No No 4 4 Solid HW 24 No No 4 4 Solid HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No HW 24 Yes No HW 24 No No HW 24 No No FT (1.82m) Material Flutes Taper Load T/O/D B/O/D I/D IPC604F12-TCTB IPC604F24-TCTB IPCNT604F12-TCTB IPCNT604F24-TCTB IPC605F12-TCTB IPC605F24-TCTB IPCNT605F12-TCTB IPCNT605F24-TCTB IPC606F12-TCTB IPC606F24-TCTB IPCNT606F12-TCTB IPCNT606F24-TCTB IPC608F12-TCTB IPC608F24-TCTB IPCNT608F12-TCTB IPCNT608F24-TCTB IPC610F12-TCTB IPC610F24-TCTB IPCNT610F12-TCTB IPCNT610F24-TCTB IPC612F12-TCTB IPCNT612F12-TCTB IPC614F12-TCTB IPCNT614F24-TCTB IPC616F24-TCTB IPCNT616F24-TCTB HW 12 Yes No 3 4 Solid HW 24 Yes No 3 4 Solid HW 12 No No 4 4 Solid HW 24 No No 4 4 Solid HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No HW 12 Yes No HW 12 No No HW 12 Yes No HW 24 No No HW 24 Yes No HW 24 No No FT (2.13m) Material Flutes Taper Load T/O/D B/O/D I/D IPC704F12-TCTB IPC704F24-TCTB IPCNT704F12-TCTB IPCNT704F24-TCTB IPC705F12-TCTB IPC705F24-TCTB IPCNT705F12-TCTB IPCNT705F24-TCTB IPC706F12-TCTB IPC706F24-TCTB IPCNT706F12-TCTB IPCNT706F24-TCTB IPC708F12-TCTB IPC708F24-TCTB IPCNT708F12-TCTB IPCNT708F24-TCTB IPC710F12-TCTB IPC710F24-TCTB IPCNT710F12-TCTB IPCNT710F24-TCTB IPC712F12-TCTB IPCNT712F12-TCTB IPC714F12-TCTB IPCNT714F24-TCTB IPC716F24-TCTB IPCNT716F24-TCTB HW 12 Yes No 3 4 Solid HW 24 Yes No 3 4 Solid HW 12 No No 4 4 Solid HW 24 No Yes 4 4 Solid HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No HW 12 Yes No HW 24 Yes No HW 12 No No HW 12 No No HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No HW 12 Yes No HW 12 No No HW 12 Yes No HW 24 No No HW 24 Yes No HW 24 No No FT (2.43m) Material Flutes Taper Load T/O/D B/O/D I/D IPC806F12-TCTB IPC806F24-TCTB IPCNT806F12-TCTB IPCNT806F24-TCTB IPPC0808F-TBTC IPAP0808F-TCTB IPC808F12-TCTB IPC808F24-TCTB IPCNT808F12-TCTB IPCNT808F24-TCTB IPPC0810F-TBTC IPC810F12-TCTB IPC810F24-TCTB IPCNT810F12-TCTB IPCNT810F24-TCTB IPPC0812F-TBTC IPC812F12-TCTB IPCNT812F12-TCTB IPC814F24-TCTB IPCNT814F24-TCTB IPC816F24-TCTB IPCNT816F24-TCTB HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No PC 16 Yes 10,000 lb 6-1/4 7-3/4 5-1/2 AP Yes No 6-3/4 7-3/8 4-5/8 HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No PC 20 Yes 14,000 lb 8 9-5/8 7 HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No PC 24 Yes 18,000 lb 9-5/8 11-7/8 8-7/8 HW 12 Yes No HW 12 No No HW 24 Yes No HW 24 No Yes HW 24 Yes No HW 24 No Yes Call for Fiberglass Load Bearing Column Prices * For load bearing columns confirm with your structural engineer * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 24

Standard Tuscan Fluted Load Bearing & Decorative HW=24 Hardwoods, AP=ArchPolymerTM, PC=PolyCompTM 4C= Fiberglass, NeoPlasterTM, StoneMoldTM, ZeamentTM 9FT (2.

IPCNT910F24-TCTB IPPC0912F-TBTC IPC912F12-TCTB IPCNT912F12-TCTB IPC914F12-TCTB IPCNT914F24-TCTB IPC916F24-TCTB IPCNT916F24-TCTB PC 16 Yes 10,000lbs 6-1/4 7-3/4 5-1/2 HW 12 Yes No 7 8 4 HW 24 Yes No 7

HW 12 Yes No 11 12 8 HW 12 No No 12 12 9 HW 12 Yes No 13 14 10 HW 24 No No 14 14 11 HW 24 Yes No 15 16 12 HW 24 No No 16 16 13 <= Cymatium <= Corona (Flat) <= Dentils <= Frieze <= Taenia <= Necking

04m) Material Flutes Taper Load T/O/D B/O/D I/D IPPC1008F-TBTC IPAP1008F-TCTB IPC1008F12-TCTB IPC1008F24-TCTB IPCNT1008F12-TCTB IPCNT1008F24-TCTB IPPC1010F-TBTC IPC1010F12-TCTB IPC1010F24-TCTB

No 6-1/2 7-3/8 4-1/2 HW 12 Yes No 7 8 4 HW 24 Yes No 7 8 4 HW 12 No No 8 8 5 HW 24 No No 8 8 5 PC 20 Yes 14,000 lb 7-1/2 9-3/4 6-1/2 HW 12 Yes No 9 10 6 HW 24 Yes No 9 10 6 HW 12 No No 10 10 7 HW 24

19 Standard Tuscan Fluted Load Bearing & Decorative HW=24 Hardwoods, AP=ArchPolymerTM, PC=PolyCompTM 4C= Fiberglass, NeoPlasterTM, StoneMoldTM, ZeamentTM 9FT (2.74m) Material Flutes Taper Load T/O/D B/O/D I/D IPPC0908F-TBTC IPC908F12-TCTB IPC908F24-TCTB IPCNT908F12-TCTB IPCNT908F24-TCTB IPPC0910F-TBTC IPC910F12-TCTB IPC910F24-TCTB IPCNT910F12-TCTB IPCNT910F24-TCTB IPPC0912F-TBTC IPC912F12-TCTB IPCNT912F12-TCTB IPC914F12-TCTB IPCNT914F24-TCTB IPC916F24-TCTB IPCNT916F24-TCTB PC 16 Yes 10,000lbs 6-1/4 7-3/4 5-1/2 HW 12 Yes No HW 24 Yes No HW 12 No No HW 12 No No PC 20 Yes 14,000 lbs 7-1/2 9-3/4 6-1/4 HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No PC 24 Yes 18,000 lb 9-5/8 11-7/8 8-7/8 HW 12 Yes No HW 12 No No HW 12 Yes No HW 24 No No HW 24 Yes No HW 24 No No <= Cymatium <= Corona (Flat) <= Dentils <= Frieze <= Taenia <= Necking <= Astragal 10FT (3.04m) Material Flutes Taper Load T/O/D B/O/D I/D IPPC1008F-TBTC IPAP1008F-TCTB IPC1008F12-TCTB IPC1008F24-TCTB IPCNT1008F12-TCTB IPCNT1008F24-TCTB IPPC1010F-TBTC IPC1010F12-TCTB IPC1010F24-TCTB IPCNT1010F12-TCTB IPCNT1010F24-TCTB IPPC1012F-TBTC IPC1012F12-TCTB IPCNT1012F12-TCTB IPC1014F12-TCTB IPCNT1014F24-TCTB IPC1016F24-TCTB IPCNT1016F24-TCTB PC 16 Yes 10,000lbs 6-1/8 7-5/8 5-3/8 AP Yes No 6-1/2 7-3/8 4-1/2 HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No PC 20 Yes 14,000 lb 7-1/2 9-3/4 6-1/2 HW 12 Yes No HW 24 Yes No HW 12 No No HW 24 No No PC 24 Yes 18,000 lb 9-5/8 11-7/8 8-7/8 HW 12 Yes No HW 12 No No HW 12 Yes No HW 24 No No HW 24 Yes No HW 24 No No PolyComposite 12FT (3.65m) Material Flutes Taper Load T/O/D B/O/D I/D IPPC1212F-TBTC PC 24 Yes 18,000lb 9-5/8 11-7/8 8-7/8 IPC1212F12-TCTB HW 12 Yes No IPCNT1212F12-TCTB HW 12 No No IPC1214F12-TCTB HW 12 Yes No IPCNT1214F24-TCTB HW 24 No No IPC1216F24-TCTB HW 24 Yes No IPCNT1216F24-TCTB HW 24 No No FT (4.26m) Material Flutes Taper Load T/O/D B/O/D I/D IPC1414F24-TCTB HW 24 Yes No IPCNT1414F24-TCTB HW 24 No No IPC1416F24-TCTB HW 24 Yes No * For load bearing columns confirm with your structural engineer * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 25

20 Custom Tuscan Capitals made from Solid Hardwoods Replacements Made to Exact sizes Drawing 1: Square Has No Bevel < D > --> --> E H --> C --> --> < (A) > Drawing 2: Square Has a Bevel --> --> E H --> C D) Square Width Square Depth E) Square Height Square with Bevel or No Bevel < D > H) Total Height of all parts: Hardwoods Interior Use Paint Grade: Basswood Maple Fingerjoint Pine AmPoplar Stain Grade: <= Sap Maple Red Oak / White Oak Bevel Alder Cherry Beech --> --> Walnut African Mahogany < (A) > Ash Yellow Birch How Many Capitals: Type of Wood: Exterior Use A) Round Flat Diameterr (slightly larger than top of column) Knotty Pine White Pine Clear Pine B) Round Diameter Western Red Cedar White Oak C) Round Height Columns Page 26

Standard Tuscan Capitals made from Solid Hardwoods Item # Flat by Shaft (A) Square (D) Total Height (H) IPWTC04 4-1/4 (10.79cm) 6-1/2 x 6-1/2 (16.51 x 16.51cm) 2-1/2 (6.35cm) IPWTC05 5-1/4 (13.

89cm) IPWTC10 10-1/4 (26.03cm) 13 x13 (33.02 x 33.02cm) 3-1/2 (8.89cm) IPWTC12 12-1/4 (31.11cm) 15 x15 (38.1x38.1cm) 3-1/2 (8.89cm) IPWTC14 14-1/4 (36.19cm) 17 x 17 (43.18 x 43.18cm) 3-1/2 (8.

21 Standard Tuscan Capitals made from Solid Hardwoods Item # Flat by Shaft (A) Square (D) Total Height (H) IPWTC04 4-1/4 (10.79cm) 6-1/2 x 6-1/2 (16.51 x 16.51cm) 2-1/2 (6.35cm) IPWTC05 5-1/4 (13.97cm) 7-1/2 x 7-1/2 (19.05 x 19.05cm) 2-1/2 (6.35cm) IPWTC06 6-1/4 (15.87cm) 8-1/2 x 8-1/2 (21.59 x 21.59cm) 2-1/2 (6.35cm) IPWTC08 8-1/4 (20.95cm) 11 x 11 (27.94 x 27.94cm) 3-1/2 (8.89cm) IPWTC /4 (26.03cm) 13 x13 (33.02 x 33.02cm) 3-1/2 (8.89cm) IPWTC /4 (31.11cm) 15 x15 (38.1x38.1cm) 3-1/2 (8.89cm) IPWTC /4 (36.19cm) 17 x 17 (43.18 x 43.18cm) 3-1/2 (8.89cm) IPWTC /4 (41.27cm) 19 x 19 (48.26 x 48.26cm) 3-1/2 (8.89cm) IPWTC /2 (47cm) 22 x 22 (55.8 x 55.8cm) 3-1/2 (8.89cm) <--A Standard Tuscan Capitals made from PolyCompTM -----> H -----> < A > < D > Item# A) Inside Hole D) Square H) Height IPPCTC06 6-1/4 (13.65cm) 8 x 8 (20.32 x 20.32cm) 3 (7.62cm) IPPCTC08NT 7-5/8 (19.36cm) 10 x 10 (25.4 x 25.4cm) 4-1/8 (10.47cm) IPPCTC /16 (19.54cm) 10 x 10 (25.4 x 25.4cm) 4-1/8 (10.47cm) IPPCTC10NT 9-5/8 (24.44cm) 13-1/8 x 13-1/8 (33.33cm) 5-5/8 (14.28cm) IPPCTC10 9-7/8 (25.08cm) 13-1/8 x 13-1/8 (33.33cm) 5-5/8 (14.28cm) IPPCTC12NT 11-3/4 (29.84cm) 15-3/8 x 15-3/8 (39.05cm) 6-5/16 (16.04cm) IPPCTC /4 (29.84cm) 15-3/8 x 15-3/8 (39.05cm) 6-5/16 (16.03cm) IPPCTC14NT 13-3/4 (34.92cm) 18-5/8 x 18-5/8 (47.3cm) 7-1/2 (18.41cm) IPPCTC /8 (35.87cm) 18-5/8 x 18-5/8 (47.3cm) 7-1/4 (18.41cm) IPPCTC16NT 15-3/4 (40cm) 21-1/4 x 21-1/4 (53.97cm) 8-1/8 (20.63cm) IPPCTC /4 (41.27cm) 21-1/4 x 21-1/4 (53.97cm) 8-1/8 (20.63cm) IPPCTC18NT 17-5/8 (44.76cm) 24 x 24 (60.96 x 60.96cm) 8-1/8 (20.63cm) IPPCTC /8 (44.76cm) 24 x 24 (60.96 x 60.96cm) 9-1/4 (23.49cm) IPPCTC20NT 19-7/8 (50.48cm) 26-1/2 x 26-1/2 (67.31cm) 7-1/4 (18.41cm) IPPCTC /16 (50.95cm) 26-1/4 x 26-1/4 (66.67cm) 11 (27.94cm) IPPCTC24NT 23-7/8 (60.64cm) 32-1/4 x 32-1/4 (81.91cm) 7-1/4 (18.41cm) IPPCTC24 24 (10.8cm) 32-1/4 x 32-1/4 (81.9cm) 13-1/2 (34.29cm) PolyComposite an FRP Product Cuts for post wrap Rot, Insect Resistant Fiberglass, Hollow 25% Polyester Resins 70% Calcium Carbonate 5% Marble Chips * Note: When splitting capitals you will loose the thickness of the blade when cutting to wrap an existing column All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 27

22 Standard Tuscan Capitals made from ArchPolymerTM -----> H -----> < A > < D > ArchPolymerTM Made from Molds, Hollow No Customization Cuts like wood for post wrap Rot, Insect Resistant (Hollow) Primed White Ready to Paint Base # A) Inside Hole D) Square H) Height IPTC107 6 (15.2cm) 8-5/8 x 8-5/8 (21.9cm) 4-3/8 (11.1cm) IPTC /8 (15.5cm) 9 x 9 (22.8cm) 3-1/4 (8.2cm) IPMRD0600C 6-1/2 (16.5cm) 9-1/2 x 9-1/2 (24.1cm) 3 (16.8cm) IPTC /16 (17.6cm) 9-13/16 x 9-13/16 (24.9cm) 3-1/4 (8.2cm) IPTC /16 (19.2cm) 10-3/4 x 10-3/4 (27.3cm) 4-3/8 (19.2cm) IPTC /4 (19.6cm) 10-5/8 x 10-5/8 (26.9cm) 3-1/4 (8.2cm) IPTC /8 (20.6cm) 11 x 11 (27.9cm) 3-1/4 (8.2cm) IPTC /8 (21.2cm) 10-3/4 x 10-3/4 (27.3cm) 4-3/8 (11.1cm) IPTC /2 (21.5cm) 11 x 11 (27.9cm) 4-1/4 (10.7cm) IPMRD0601C 8-5/8 (21.9cm) 12-1/2 x 12-1/2 (31.7cm) 4 (10.1cm) IPTC /4 (22cm) 11-5/8 x 11-5/8 (29.5cm) 3-1/4 (8.2cm) IPTC /8 (24.4cm) 13-1/2 x 13-1/2 (34.2cm) 5-1/4 (13.3cm) IPTC /8 (24.4cm) 12-3/16 x 12-3/16 (30.9cm) 4-1/16 (10.3cm) IPTC /4 (24.7cm) 12-7/8 x 12-7/8 (32.7cm) 3-1/4 (8.2cm) IPTC /16 (24.9cm) 13 x 13 (33cm) 4-3/8 (11.1cm) IPTC /8 (25.7cm) 13 x 13 (33.02cm) 3-1/4 (8.2cm) IPTC /2 (26.6cm) 13-3/8 x 13-3/8 (33.9cm) 3-1/4 (8.2cm) IPMRD0602C 10-3/4 (27.3cm) 15 x 15 (38.1cm) 4-1/2 (11.4cm) IPTC /8 (30.1cm) 17 x 17 (43.1cm) 4-7/16 (11.2cm) IPTC (30.4cm) 14-7/8 x 14-7/8 (37.7cm) 3-1/4 (8.2cm) IPTC (30.4cm) 18 x 18 (45.7cm) 6-3/8 (16.1cm) IPTC (30.4cm) 15-3/4 x 15-3/4 (40cm) 6-3/16 (17.3cm) IPTC /8 (30.7cm) 15 x 15 (38.1cm) 3-1/4 (8.2cm) IPMRD0603C 12-5/8 (32cm) 17-1/8 x 17-1/8 (43.1cm 5 (12.7cm) IPTC (35.5cm) 18-1/8 x 18-1/8 (46cm) 6 (15.2cm) IPTC /16 (35.7cm) 18 x 18 (45.7cm) 6-1/16 (15.4cm) IPTC /16 (36cm) 17-1/16 x 17-1/16 (43.3cm) 3-1/4 (8.25cm) IPTC (38.1cm) 19-1/4 x 19-1/4 (48.8cm) 7-13/16 (19.8cm) IPTC /4 (46.3cm) 23 x 23 (58.4cm) 9-1/2 (24.1cm) IPTC /2 (46.9cm) 24 x 24 (60.9cm) 9 (22.8cm) IPTC /4 (52.7cm) 24-3/8 x 24-3/8 (61.9cm) 9-1/8 (23.1cm) IPTC /4 (53.9cm) 26 x 26 (66cm) 9-1/2 (24.1cm) IPTC /2 (54.6cm) 26 x 26 (66cm) 9-3/8 (23.8cm) IPTC /2 (56.6cm) 30 x 30 (76.2cm) 12-1/4 (31.1cm) IPTC (66cm) 30-1/8 x 30-1/8 (76.5cm) 7 (17.7cm) IPTC /16 (76cm) 36 x 36 (91.44cm) 10 (25.4cm) * Note: When splitting capitals you will loose the thickness of the blade when cutting to wrap an existing column All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 28

---------------------> <----------------------------- B -------------------------> <-------------------------------- D ---------------------------> A) Top Diameter (slightly larger than bottom of

23 Custom Tuscan Bases made to Exact Sizes Hardwoods Drawing 1: Square Has No Bevel --> --> C H --> E --> --> < (A) > < D > Drawing 2: Square Has a Bevel --> --> C H --> E --> --> How Many Bases: < (A) > < D > A) Top Diameter (slightly larger than bottom of column) B) Round Diameter (largest extent) Hardwood Solid Bases Interior Paint Grade: Basswood, Maple <= Fingerjoint Pine, Poplar Bevel Interior Stain Grade: Ash, Alder, Beech, Cherry Maple, Sap Maple Red Oak / White Oak Walnut, Yellow Birch African Mahogany Exterior Use Knotty Pine, White Pine Clear Pine, White Oak Western Red Cedar C) Round Height D) Square Width Square Depth E) Square Height Square with Bevel or No Bevel H) Total Height of all parts: I) Material: Refer to Material Page NonWood Hollow Bases Interior / Exterior ArchPolymerTM Fiberglass Neo-PlasterTM (GRG) ZeamentTM StonemoldTM Requires Wood Plug to cast Mold Columns Page 29

Standard Tuscan Solid Bases made from Hardwood Item # Top Flat (A) Square Base (D) Total Height (H) IPWTB04 4-1/4 (10.79cm) 6-1/2 x 6-1/2 (16.51 x 16.51cm) 2-1/2 (6.35cm) IPWTB05 5-1/4 (13.

89cm) IPWTB10 10-1/4 (26.03cm) 13 x13 (33.02 x 33.02cm) 3-1/2 (8.89cm) IPWTB12 12-1/4 (31.11cm) 15 x15 (38.1x38.1cm) 3-1/2 (8.89cm) IPWTB14 14-1/4 (36.19cm) 17 x 17 (43.18 x 43.18cm) 3-1/2 (8.

89cm) Standard: Tuscan Solid ArchPolymerTM Item # Top Round Square Base Total Height IPTB525 8 (20.3) 11-3/4 x 11-3/4 (29.8cm) 2-7/8 (7.3cm) IPTB526 10 (25.4) 12-3/4 x 12-3/4 (32.

24 Standard Tuscan Solid Bases made from Hardwood Item # Top Flat (A) Square Base (D) Total Height (H) IPWTB04 4-1/4 (10.79cm) 6-1/2 x 6-1/2 (16.51 x 16.51cm) 2-1/2 (6.35cm) IPWTB05 5-1/4 (13.97cm) 7-1/2 x 7-1/2 (19.05 x 19.05cm) 2-1/2 (6.35cm) IPWTB06 6-1/4 (15.87cm) 8-1/2 x 8-1/2 (21.59 x 21.59cm) 2-1/2 (6.35cm) IPWTB08 8-1/4 (20.95cm) 11 x 11 (27.94 x 27.94cm) 3-1/2 (8.89cm) IPWTB /4 (26.03cm) 13 x13 (33.02 x 33.02cm) 3-1/2 (8.89cm) IPWTB /4 (31.11cm) 15 x15 (38.1x38.1cm) 3-1/2 (8.89cm) IPWTB /4 (36.19cm) 17 x 17 (43.18 x 43.18cm) 3-1/2 (8.89cm) IPWTB /4 (41.27cm) 19 x 19 (48.26 x 48.26cm) 3-1/2 (8.89cm) IPWTB /2 (47cm) 22 x 22 (55.8 x 55.8cm) 3-1/2 (8.89cm) Standard: Tuscan Solid ArchPolymerTM Item # Top Round Square Base Total Height IPTB525 8 (20.3) 11-3/4 x 11-3/4 (29.8cm) 2-7/8 (7.3cm) IPTB (25.4) 12-3/4 x 12-3/4 (32.3cm) 3-1/2 (8cm) IPTB (30.4) 15 x 15 (38.1cm) 3-1/2 (8cm) IPTB (35.5) 17 x 17 (43.1cm) 3-1/2 (8cm) Standard Tuscan Hollow Bases made from PolyCompTM < A > PolyCompTM -----> Cuts for post wrap H Rot, Insect Resistant Fiberglass, Hollow 25% Polyester Resins -----> 70% Calcium Carbonate < D > 5% Marble Chips Item# A) Inside Hole D) Square H) Height IPPCTB06 6-1/4 (13.65cm) 8 x 8 (20.32 x 20.32cm) 3 (7.62cm) IPPCTB08NT 7-5/8 (19.36cm) 10 x 10 (25.4 x 25.4cm) 4-1/8 (10.47cm) IPPCTB /16 (19.54cm) 10 x 10 (25.4 x 25.4cm) 4-1/8 (10.47cm) IPPCTB10NT 9-5/8 (24.44cm) 13-1/8 x 13-1/8 (33.33cm) 5-5/8 (14.28cm) IPPCTB10 9-7/8 (25.08cm) 13-1/8 x 13-1/8 (33.33cm) 5-5/8 (14.28cm) IPPCTB12NT 11-3/4 (29.84cm) 15-3/8 x 15-3/8 (39.05cm) 6-5/16 (16.04cm) IPPCTB /4 (29.84cm) 15-3/8 x 15-3/8 (39.05cm) 6-5/16 (16.03cm) IPPCTB14NT 13-3/4 (34.92cm) 18-5/8 x 18-5/8 (47.3cm) 7-1/2 (18.41cm) IPPCTB /8 (35.87cm) 18-5/8 x 18-5/8 (47.3cm) 7-1/4 (18.41cm) IPPCTB16NT 15-3/4 (40cm) 21-1/4 x 21-1/4 (53.97cm) 8-1/8 (20.63cm) IPPCTB /4 (41.27cm) 21-1/4 x 21-1/4 (53.97cm) 8-1/8 (20.63cm) IPPCTB18NT 17-5/8 (44.76cm) 24 x 24 (60.96 x 60.96cm) 8-1/8 (20.63cm) IPPCTB /8 (44.76cm) 24 x 24 (60.96 x 60.96cm) 9-1/4 (23.49cm) IPPCTB20NT 19-7/8 (50.48cm) 26-1/2 x 26-1/2 (67.31cm) 7-1/4 (18.41cm) IPPCTB /16 (50.95cm) 26-1/4 x 26-1/4 (66.67cm) 11 (27.94cm) IPPCTB24NT 23-7/8 (60.64cm) 32-1/4 x 32-1/4 (81.91cm) 7-1/4 (18.41cm) IPPCTB24 24 (10.8cm) 32-1/4 x 32-1/4 (81.9cm) 13-1/2 (34.29cm) * Note: you will loose the thickness of the blade when cutting to wrap an existing colum All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 30

25 Standard Tuscan Hollow Bases made from ArchPolymerTM -----> H -----> < A > < D > ArchPolymerTM Made from Molds, Hollow No Customization Cuts like wood for post wrap Rot, Insect Resistant Primed White Ready to Paint Base # A) Inside Hole D) Square H) Height IPTB107 6 (15.24cm) 8-5/8 x 8-5/8 (21.9cm) 4-3/8 (11.11cm) IPTB /8 (15.55cm) 9 x 9 (22.86cm) 3-1/4 (8.255cm) IPMRD /2 (16.51cm) 9-1/2 x 9-1/2 (24.13cm) 3 (16.82cm) IPTB /16 (17.6cm) 9-13/16 x 9-13/16 (24.9cm) 3-1/4 (8.2cm) IPTB /16 (19.22cm) 10-3/4 x 10-3/4 (27.3cm) 4-3/8 (19.22cm) IPTB /4 (19.68cm) 10-5/8 x 10-5/8 (26.98cm) 3-1/4 (8.25cm) IPTB /8 (20.63cm) 11 x 11 (27.94cm) 3-1/4 (8.25cm) IPTB /8 (21.27cm) 10-3/4 x 10-3/4 (27.3cm) 4-3/8 (11.11cm) IPTB /2 (21.59cm) 11 x 11 (27.94cm) 4-1/4 (10.79cm) IPMRD /8 (21.9cm) 12-1/2 x 12-1/2 (31.75cm) 4 (10.16cm) IPTB /4 (22cm) 11-5/8 x 11-5/8 (29.52cm) 3-1/4 (8.255cm) IPTB /8 (24.44cm) 13-1/2 x 13-1/2 (34.29cm) 5-1/4 (13.33cm) IPTB /8 (24.44cm) 12-3/16 x 12-3/16 (30.96cm) 4-1/16 (10.32cm) IPTB /4 (24.7cm) 12-7/8 x 12-7/8 (32.7cm) 3-1/4 (8.2cm) IPTB /16 (24.94cm) 13 x 13 (33cm) 4-3/8 (11.11cm) IPTB /8 (25.71cm) 13 x 13 (33.02cm) 3-1/4 (8.25cm) IPTB /2 (26.67cm) 13-3/8 x 13-3/8 (33.97cm) 3-1/4 (8.25cm) IPMRD /4 (27.3cm) 15 x 15 (38.1cm) 4-1/2 (11.43cm) IPTB /8 (30.1cm) 17 x 17 (43.1cm) 4-7/16 (11.2cm) IPTB (30.4cm) 14-7/8 x 14-7/8 (37.7cm) 3-1/4 (8.2cm) IPTB (30.48cm) 18 x 18 (45.72cm) 6-3/8 (16.19cm) IPTB (30.48cm) 15-3/4 x 15-3/4 (40cm) 6-3/16 (17.32cm) IPTB /8 (30.79cm) 15 x 15 (38.1cm) 3-1/4 (8.25cm) IPMRD /8 (32.06cm) 17-1/8 x 17-1/8 (43.18cm 5 (12.7cm) IPTB (35.56cm) 18-1/8 x 18-1/8 (46.03cm) 6 (15.24cm) IPTB /16 (35.7cm) 18 x 18 (45.7cm) 6-1/16 (15.4cm) IPTB /16 (36.04cm) 17-1/16 x 17-1/16 (43.34cm) 3-1/4 (8.25cm) IPTB (38.1cm) 19-1/4 x 19-1/4 (48.89cm) 7-13/16 (19.8cm) IPTB /4 (46.35cm) 23 x 23 (58.42cm) 9-1/2 (24.13cm) IPTB /2 (46.99cm) 24 x 24 (60.96cm) 9 (22.86cm) IPTB /4 (52.7cm) 24-3/8 x 24-3/8 (61.91cm) 9-1/8 (23.17cm) IPTB /4 (53.97cm) 26 x 26 (66.04cm) 9-1/2 (24.13cm) IPTB /2 (54.61cm) 26 x 26 (66.04cm) 9-3/8 (23.81cm) IPTB /2 (56.69cm) 30 x 30 (76.2cm) 12-1/4 (31.1cm) IPTB (66.04cm) 30-1/8 x 30-1/8 (76.51cm) 7 (17.78cm) IPTB /16 (76.06cm) 36 x 36 (91.44cm) 10 (25.4cm) * Note: you will loose the thickness of the blade when cutting to wrap an existing colum All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 31

-------------------------------------> How Many Bases: A) Top Diameter (slightly larger than bottom of column) B1) Round Top Diameter Height: B2) Concave Height: B3) Round Bottom Diameter Height: B)

26 Custom Attic Bases made to Exact Sizes Replacements to Exact sizes Example: Attic with optional column bottom --> H --> --> B --> < (A) > C < D > --> How Many Bases: A) Top Diameter (slightly larger than bottom of column) B1) Round Top Diameter Height: B2) Concave Height: B3) Round Bottom Diameter Height: B) Total Round Height Hardwood Solid Bases Interior Paint Grade: Basswood, Maple Fingerjoint Pine, Poplar Interior Stain Grade: Ash, Alder, Beech, Cherry Maple, Sap Maple Red Oak / White Oak Walnut, Yellow Birch African Mahogany Exterior Use Knotty Pine, White Pine Clear Pine, White Oak Western Red Cedar NonWood Hollow Bases Interior / Exterior ArchPolymerTM Fiberglass Neo-PlasterTM (GRG) ZeamentTM StonemoldTM C) Square Height D) Square Width Square Depth H) Total Height of all parts: Material: Refer to Material Page * Note: you will loose the thickness of the blade when cutting to wrap an existing colum All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 32

Standard Attic Bases -----> H < --------- A ----------------> -----> < ------------- D -----------------> Standard made from solid Hardwoods Item # Top Flat (A) Square Base (D) Total Height (H)

25cm) IPWAB08 8-1/2 (20.32cm) 10 x 10 (25.4 x 25.4cm) 4-1/4 (10.79cm) IPWAB10 10-1/2 (26.67cm) 12-1/2 x12-1/2 (31.75x31.75cm) 5-1/4 (13.33cm) IPWAB12 12-1/2 (31.75cm) 14-1/2 x14-1/2 (36.83x36.

41cm) Standard made from ArchPolymerTM No Rot: an Artifical Wood with the same consistency as White Pine Item# A) Inside Hole D) Square H) Height IPATTC100 7-11/16 (19.54cm) 11 x 11 (27.

88cm) 13-7/16 x 13-7/16 (34.14cm) 5-1/2 (13.97cm) IPATTC102 11-1/2 (29.21cm) 15-5/8 x 15-5/8 (39.68cm) 6-1/4 (15.87cm) IPATTC103 11-3/4 (29.84cm) 15-3/8 x 15-3/8 (39.05cm) 7-1/4 (18.

57cm) 6-3/4 (17.14cm) IPATTC106 15-1/2 (39.37cm) 23 x 23 (58.42cm) 11 (27.94cm) IPATTC107 16-1/4 (54.27cm) 23-3/4 x 23-3/4 (60.32cm) 11 (27.

27 Standard Attic Bases -----> H < A > -----> < D > Standard made from solid Hardwoods Item # Top Flat (A) Square Base (D) Total Height (H) IPWAB04 4-1/2 (10.16cm) 5-1/4 x 5-1/4 (13.33 x 13.33cm) 2-1/4 IPWAB05 5-1/2 (13.97cm) 6-1/2 x 6-1/2 (16.51 x 16.51cm) 2-3/4 (6.98cm) IPWAB06 6-1/2 (16.51cm) 7-7/8 x 7-7/8 (20 x 20cm) 3-1/4 (8.25cm) IPWAB08 8-1/2 (20.32cm) 10 x 10 (25.4 x 25.4cm) 4-1/4 (10.79cm) IPWAB /2 (26.67cm) 12-1/2 x12-1/2 (31.75x31.75cm) 5-1/4 (13.33cm) IPWAB /2 (31.75cm) 14-1/2 x14-1/2 (36.83x36.83cm) 6-1/4 (15.87cm) IPWAB /2 (36.83cm) 17 x 17 (43.18 x 43.18cm) 7-1/4 (18.41cm) Standard made from ArchPolymerTM No Rot: an Artifical Wood with the same consistency as White Pine Item# A) Inside Hole D) Square H) Height IPATTC /16 (19.54cm) 11 x 11 (27.94cm) 5-1/4 (13.33cm) IPATTC /16 (20.8cm) 10-3/4 x 10-3/4 (27.3cm) 4-3/8 (11.11cm) IPATTC /4 (24.76cm) 12-7/8 x 12-7/8 (32.7cm) 6-1/4 (15.87cm) IPATTC /16 (25.88cm) 13-7/16 x 13-7/16 (34.14cm) 5-1/2 (13.97cm) IPATTC /2 (29.21cm) 15-5/8 x 15-5/8 (39.68cm) 6-1/4 (15.87cm) IPATTC /4 (29.84cm) 15-3/8 x 15-3/8 (39.05cm) 7-1/4 (18.41cm) IPATTC (30.48cm) 16-1/8 x 16-1/8 (40.95cm) 6-3/4 (17.14cm) IPATTC /16 (30.96cm) 15-15/16 x 15-15/16 (38.9) 6-3/8 (16.19cm) IPATTC /8 (38.4cm) 19-1/8 x 19-1/8 (48.57cm) 6-3/4 (17.14cm) IPATTC /2 (39.37cm) 23 x 23 (58.42cm) 11 (27.94cm) IPATTC /4 (54.27cm) 23-3/4 x 23-3/4 (60.32cm) 11 (27.94cm) Standard made from PolyCompTM No Rot: Fiberglass 25% Polyester Resin,70% Calcium Carbonate 5% Marble Chips Item # A) Inside Hole D) Square H) Height IPPCAB08 7-3/4 (19.68cm) 10-1/4 x 10-1/4 (26.03cm 4-1/2 (11.43cm) IPPCAB10 9-3/4 (24.76cm) 13 x 13 (33.02cm) 5-3/4 (14.6cm) IPPCAB12 12 (30.48cm) 15-5/8 x 15-5/8 (39.48cm) 6-1/2 (16.41cm) IPPCAB /4 (36.19cm) 19 x 19 (48.26cm) 8-1/4 (20.95cm) IPPCAB /2 (41.91cm) 21-1/2 x 21-1/2 (54.61cm) 8-3/4 (22.22cm) IPPCAB /8 (45cm) 24 x 24 (60.96) call IPPCAB /8 (51.1cm) 26-1/2 x 26-1/2 (67.3) call * Note: you will loose the thickness of the blade when cutting to wrap an existing colum All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 33

Standard Load Bearing Plugs for Hollow Bases PLUGS FOR HOLLOW TUSCAN BASES Item # for Base Diameter x Height IPPLUG100 IPTB107 5-3/4" x 4-3/8" IPPLUG101 IPTB500 5-3/4" x 3-1/4" IPPLUG102 IPPCTB06 6"

3-1/4" IPPLUG111 IPTB100 8-1/8" x 4-3/8" IPPLUG113 IPTB104 8-1/4" x 4-1/4" IPPLUG114 IPMRD0601 8-3/8 x 4" IPPLUG115 IPTB101 9-3/8 x 5-1/4" IPPLUG116 IPTB112 9-3/8" x 4-1/16" IPPLUG117 IPPCTB10NT

28 Standard Load Bearing Plugs for Hollow Bases PLUGS FOR HOLLOW TUSCAN BASES Item # for Base Diameter x Height IPPLUG100 IPTB /4" x 4-3/8" IPPLUG101 IPTB /4" x 3-1/4" IPPLUG102 IPPCTB06 6" x 3" IPPLUG103 IPMRD /4" x 3" IPPLUG104 IPTB /4" x 4-3/8" IPPLUG105 IPPCTB08NT 7-3/8" x 4-1/8" IPPLUG106 IPPCTB08 7-7/16" x 4-1/8 IPPLUG108 IPTB /2" x 3-1/4 IPPLUG110 IPTB501 8" x 3-1/4" IPPLUG111 IPTB /8" x 4-3/8" IPPLUG113 IPTB /4" x 4-1/4" IPPLUG114 IPMRD /8 x 4" IPPLUG115 IPTB /8 x 5-1/4" IPPLUG116 IPTB /8" x 4-1/16" IPPLUG117 IPPCTB10NT 9-3/8" x 5-5/8" IPPLUG120 IPTB /2 x 3-1/4" IPPLUG121 IPTB /16" x 4-3/8" IPPLUG122 IPPCTB10 9-5/8" x 5-5/8" IPPLUG123 IPTB /8" x 3-1/4" IPPLUG125 IPTB /4" x 3-1/4" IPPLUG126 IPMRD /2" x 4-1/2" IPPLUG130 IPPCTB12NT 11-1/2" x 6-5/16" IPPLUG131 IPPCTB /2" x 6-5/16" IPPLUG133 IPTB /4" x 6-3/8" IPPLUG134 IPTB /4" x 6-3/16" IPPLUG136 IPTB /4" x 3-1/4" IPPLUG137 IPMRD /8" x 5" IPPLUG138 IPPCTB14NT 13-1/2" x7-1/4" IPPLUG139 IPTB /4" x 6" IPPLUG140 IPPCTB /8" x 7-1/4" IPPLUG141 IPTB /16" x 3-1/4" IPPLUG143 IPTB /4" x 7-13/16" IPPLUG146 IPPCTB16NT 15-1/2" x 8-1/8" IPPLUG148 IPPCTB16 16" x 8-1/8" IPPLUG149 IPPCTB18NT 17-3/8" x 8-1/8" IPPLUG151 IPTB114 18" x 9-1/2" IPPLUG152 IPTB /4" x 9 IPPLUG153 IPPCTB20NT 19-5/8" x 7-1/4" IPPLUG154 IPPCTB /8" x 11 IPPLUG155 IPTB /2" x 9-1/8" IPPLUG156 IPTB115 21" x 9-1/2" IPPLUG157 IPTB /4" x 9-3/8" IPPLUG158 IPTB /4" x 12-1/4" IPPLUG159 IPPCTB24NT 23-5/8" x 7-1/4" IPPLUG160 IPPCTB /4" x13-1/2" IPPLUG161 IPTB /4" x7" IPPLUG162 IPTB /16" x 10 Made from Laminated Pressure Treated Wood PLUGS FOR HOLLOW ATTIC BASES Item # for Base Diameter x Height IPPLUG107 IPATTC /16 x 5-1/4 IPPLUG109 IPPCAB08 7-1/2 x 4-5/8 IPPLUG112 IPATTC /16 x 4-3/8 IPPLUG118 IPATTC /2 x 6-1/4 IPPLUG119 IPPCAB10 9-5/8 x 5-5/8 IPPLUG124 IPATTC /16 x 5-1/2 IPPLUG127 IPATTC /4 x 6-1/4 IPPLUG128 IPATTC /2 x 7-1/4 IPPLUG129 IPPCAB /4 x 6-3/8 IPPLUG132 IPATTC /4 x 6-3/4 IPPLUG135 IPATTC /16 x 6-3/8 IPPLUG142 IPPCAB /8 x 8-3/8 IPPLUG144 IPATTC /8 x 6-3/4 IPPLUG145 IPATTC /4 x 11 IPPLUG147 IPATTC /2 x 11 IPPLUG150 IPPCAB /8 x 9-1/4 Install Tips: Erect 2 jack posts on either side of the column to support it temporarily. Always consult a structural engineer before removing columns. Installing Plugs: 1) Cut away rotted column bottom 2) Insert Load Bearing Plug into the hollow base 3) Slide in Plug & Base under the shaft 4) Lower Column onto the Load Plug Optional Column Extensions If more of the column is rotted, send us a drawing of the column extension See page 211 Preparations * For load bearing plugs for columns confirm loads with your structural engineer * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 34

Custom Mixed Smooth & Fluted Shaft => (I) => <= A <= B <= C <= D <= E <= J1 <= F1 <= J2 <= F2 <= K <= G <= H PART 1 A = Top Square Width: (Abacus)

Diameter: Height: E = Astragal Diameter: Height: F1 = Top Diameter J1 = Flat Above Flutes Height Tapered Entasis Taper Ends 2/3rds down shaft J2 =

Height: PART 6 G = Round Torus Diameter: Height: Bevel (Cincture) yes / no Use: Interior Exterior PART 7 H = Square Plynth Width: Depth: How Many

29 Custom Mixed Smooth & Fluted Shaft => (I) => <= A <= B <= C <= D <= E <= J1 <= F1 <= J2 <= F2 <= K <= G <= H PART 1 A = Top Square Width: (Abacus) Depth: Height: with Bevel PART 2 B = Top Round Diameter: (Echinus) Height: PART 3 - TOP SHAFT C= Top Ring Diameter Height D = Neck (Top of Shaft) Diameter: Height: E = Astragal Diameter: Height: F1 = Top Diameter J1 = Flat Above Flutes Height Tapered Entasis Taper Ends 2/3rds down shaft J2 = Flat Under Flutes Height F2 = Bottom Diameter PART 4: Yes or No E = Delimiter Diameter: PART 5 BOTTOM SHAFT K = Bottom Shaft (Smooth) Diameter: Height: PART 6 G = Round Torus Diameter: Height: Bevel (Cincture) yes / no Use: Interior Exterior PART 7 H = Square Plynth Width: Depth: How Many Whole Height: with Bevel or No Bevel Split Post Wrap I = Total Height Split for Pilaster all parts: (against wall) Hardwood Species Columns Page 35

Doric Style <= Square Abacus <= Round Echinus <= Neck (Top Shaft) <= Astragal Attic Base <= Round Torus <= Square Plinth Unfinished Materials 24 Hardwoods (Custom Sizes Interior/Exterior) Hand

30 Doric Style <= Square Abacus <= Round Echinus <= Neck (Top Shaft) <= Astragal Attic Base <= Round Torus <= Square Plinth Unfinished Materials 24 Hardwoods (Custom Sizes Interior/Exterior) Hand Crafted Custom heights & diameters Multi-Part Order Whole or Split for Pilaster / Post Wrap Interior: Fingerjoint Pine (Paint only) wall thickness 1-1/4 (3.17cm) Stain Grade: AmPoplar, Maple, Sap Maple, Basswood, Ash, Birch, Red Oak, White Oak, African Mahogany, Beech, Alder, Cherry, Walnut Wall thickness 1-1/2 (3.81cm) Exterior: White Pine, Knotty Pine, Clear Pine, Western Red Cedar ArchPolymerTM (Interior / Exterior Composite) Hi-density polyurethane with consistency of white pine, primed white. Water, rot, insect resistant. Cuts like wood and can be split for post wrap or pilaster application. No customization. PolyCompTM (Load Bearing Interior / Exterior) 70% calcium carbonate, 5% marble chips, 25% Polyester Resins. Meets ASTM-E84 Fire rated. Order whole or split for post wrap or pilaster. No customization, cut to height. Unfinished Composites Fiberglass (FRP - Interior / Exterior Composite) Gelcoat, polyester resin & glass fibers. Lite weight 2-3lbs / SqFoot. Weather resistant for earthquake and hurricane zones. Meets ASTM-E84 Fire rating. Water resistant for fountains & water displays. Mold in 2 pieces, Bondo seam. No customization, cut to height. NeoPlasterTM (GRG - Interior Composite) Alpha gypsum, cement, water, re-enforced with glass fibers. Lite weight 2-3 lbs per square foot. Meets ASTM-E84 Fire rated. Odorless and emission free. Interior use only in dry areas. Made in a mold in 2 pieces, tape & mud seam. No customization, cut to height. Finished Composites ZeamentTM Exterior Composite Lite weight Portland cement, sand, alkali resistant fibers, aggregates, polymer adhesives & water. Smooth, internally pigmented 12 colors. Sandblasted for Stone look. Exterior Use, Hurricane, earthquake zones, can be submerged in water. Meets ASTM-E84 Fire rating. Oderless & emission free safe for indoor use. Made with natural raw materials can experience light variation in color and texture. Molded in 2 parts - Seam remains as a reveal. StoneMoldTM Interior Composite Molded stone: Alpha gypsum, pigment, aggregates, water & polymers. Looks like natural stone. Weight 2-5 lbs/foot. Sealed with a clear finish. Made with natural raw materials and may experience slight variation in color and texture. Molded in 2 Parts - Seam remains as a reveal. Columns Page 36

Custom Doric Columns with Smooth or Fluted Shaft => (H) => <= A <= B <= C <= D <= E <= F <= G Section 1 (Abacus) A = Top Square Width: Depth: Height: with Bevel Section 2 (Echinus) B = Top Round

Usage: Interior Exterior How many Whole SPLIT COLUMNS (Circle) Split for Post Wrap Size of Post to Wrap Engaged Split in 1/2 (against wall) Engaged Split 3/4 Wedged for Outside Corner MATERIAL

31 Custom Doric Columns with Smooth or Fluted Shaft => (H) => <= A <= B <= C <= D <= E <= F <= G Section 1 (Abacus) A = Top Square Width: Depth: Height: with Bevel Section 2 (Echinus) B = Top Round Diameter: Height: Section 3 -SHAFT C = Neck (Top of Shaft) Diameter: Height: D = Astragal Diameter: Height: Tapered Entasis Taper Stops 2/3rds down shaft E = Bottom of Shaft Diameter: ATTIC BASE Usage: Interior Exterior How many Whole SPLIT COLUMNS (Circle) Split for Post Wrap Size of Post to Wrap Engaged Split in 1/2 (against wall) Engaged Split 3/4 Wedged for Outside Corner MATERIAL SELECTION Wood Species ArchPolymerTM Fiberglass PolyCompTM Following made in 2 parts with reveal NeoPlasterTM ZeamentTM SoneMoldTM Company: circle SMOOTH or FLUTED H = Total Height all parts: Section 4 F = Bottom Round Diameter: Height: Section 5 G = Bottom Square: Width: Depth: Height: No Bevel Ship to: Phone Columns Page 37

32 Standard Doric with Attic Base - Load bearing PolyCompTM 5 FT (1.52cm) Taper Load Top O/D Bot-O/D I/D IPPC508S-ABDC Yes 10,000lbs 6-1/8 7-5/8 5-3/8 6 FT (1.82cm) Taper Load Top O/D Bot-O/D I/D IPPC0608S-ABDC IPPC0610S-ABDC IPPC0612S-ABDC Yes 10,000lbs 6-1/8 7-5/8 5-3/8 Yes 14,000lbs 8 9-5/8 7-1/4 Yes 18,000lbs 9-3/8 11-1/2 8-5/8 8 FT (2.43cm) Taper Load Top O/D Bot-O/D I/D IPPC0808S-ABDC IPPC0810S-ABDC IPPC0812S-ABDC IPPC0814S-ABDC IPPC0816S-ABDC IPPC0818S-ABDC Yes 10,000 lbs 6-1/8 7-5/8 5-3/8 Yes 14,000lbs 8 9-5/8 7-1/4 Yes 18,000lbs 9-3/8 11-1/2 8-5/8 Yes 20,000lbs /8 11-1/4 Yes 20,000lbs 13-3/4 15-3/4 12-3/4 Yes 20,000lbs 15-3/8 17-1/4 14-3/8 9 FT (2.74cm) Taper Load Top O/D Bot-O/D I/D IPPC0908S-ABDC IPPC0910S-ABDC IPPC0912S-ABDC IPPC0914S-ABDC IPPC0916S-ABDC IPPC0918S-ABDC Yes 10,000lbs 6-1/8 7-5/8 5-3/8 Yes 14,000lbs 8 9-5/8 7-1/4 Yes 18,000lbs 9-1/2 11-1/2 8-3/4 Yes 20,000lbs /8 11-1/4 Yes 20,000lbs 13-3/4 15-3/4 12-3/4 Yes 20,000lbs 15-3/8 17-1/4 14-3/8 10 FT (3.048cm) Taper Load Top O/D Bot-O/D I/D IPPC1008S-ABDC IPPC1010S-ABDC IPPC1012S-ABDC IPPC1014S-ABDC IPPC1016S-ABDC IPPC1018S-ABDC Yes 10,000lbs 6-1/8 7-5/8 5-3/8 Yes 14,000lbs 8 9-5/8 7-1/4 Yes 18,000lbs 9-1/2 11-1/2 8-3/4 Yes 20,000lbs /8 11-1/4 Yes 20,000lbs 13-3/4 15-3/4 12-3/4 Yes 20,000lbs 15-3/8 17-1/4 14-3/8 Standard Doric Capitals 12 FT (3.65cm) Taper Load Top O/D Bot-O/D I/D IPPC1210S-TBDC Yes 14,000lbs 8 9-5/8 7-1/4 IPPC1212S-TBDC Yes 18,000lbs 9-5/8 11-5/8 8-7/8 IPPC1214S-TBDC Yes 20,000lbs /8 11-1/4 IPPC1216S-TBDC Yes 20,000lbs 13-3/4 15-3/4 12-3/4 IPPC1218S-TBDC Yes 20,000lbs 15-3/8 17-1/4 14-3/8 14 FT (4.26cm) Taper Load Top O/D Bot-O/D I/D IPPC1412S-TBDC Yes 18,000lbs 9-5/8 11-5/8 8-7/8 IPPC1414S-TBDC Yes 20,000lbs /4 IPPC1416P-TBDC Yes 20,000lbs 13-3/4 15-3/4 12-3/4 IPPC1418S-TBDC Yes 20,000lbs 15-1/4 17-5/8 14-3/8 16 FT (4.87cm) Taper Load Top O/D Bot-O/D I/D IPPC1612S-ABDC Yes 18,000lbs 9-5/8 11-5/8 8-7/8 IPPC1614S-ABDC Yes 20,000lbs /4 IPPC1616S-ABDC Yes 20,000lbs 13-3/4 15-3/4 12-3/4 IPPC1618S-ABDC Yes 20,000lbs 15-1/4 17-5/8 14-1/4 18 FT (5.48cm) Taper Load Top O/D Bot-O/D I/D IPPC1814S-ABDC Yes 20,000 lbs /4 IPPC1816S-ABDC Yes 20,000 lbs 13-3/4 15-3/4 12-3/4 IPPC1818S-ABDC Yes 20,000 lbs 15-1/4 17-5/8 14-1/4 20 FT (6.09cm) Taper Load Top O/D Bot-O/D I/D IPPC2018S-ABDC Yes 20,000 lbs 15-1/4 17-5/8 14-1/4 Standard Doric Columns CAD Drawing Required 24 Hardwoods: UnFinished Composites: PolyComposite Fiberglass / NeoPlasterTM Code Top Height Inside Hole IPPCDC08 IPPCDC10 IPPCDC12 IPPCDC14 IPPCDC16 IPPCDC18 9-7/8 x 9-7/8 2-5/8 6-3/8 12-3/8 x 12-3/ /8 14-1/8 x 14-1/8 3-5/8 9-3/4 17-1/4 x 17-1/4 3-3/ /4 x 19-1/ /8 18 Finished Composites: ZeamentTM Exterior StoneMoldTM Interior * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 38

Greek Doric Style <= Square Abacus <= Round Echinas <= Neck (Top Shaft) <= Astragal Unfinished Composites Fiberglass (FRP - Interior / Exterior Composite) Gelcoat, polyester resin & glass fibers.

No customization, cut to height. NeoPlasterTM (GRG - Interior Composite) Alpha gypsum, cement, water, re-enforced with glass fibers. Lite weight 2-3 lbs per square foot. Meets ASTM-E84 Fire rated.

Finished Composites ZeamentTM Exterior Composite Lite weight Portland cement, sand, alkali resistant fibers, aggregates, polymer adhesives & water. Smooth, internally pigmented 12 colors.

33 Greek Doric Style <= Square Abacus <= Round Echinas <= Neck (Top Shaft) <= Astragal Unfinished Composites Fiberglass (FRP - Interior / Exterior Composite) Gelcoat, polyester resin & glass fibers. Lite weight 2-3lbs / SqFoot. Weather resistant for earthquake and hurricane zones. Meets ASTM-E84 Fire rating. Water resistant for fountains & water displays. Mold in 2 pieces, Bondo seam. No customization, cut to height. NeoPlasterTM (GRG - Interior Composite) Alpha gypsum, cement, water, re-enforced with glass fibers. Lite weight 2-3 lbs per square foot. Meets ASTM-E84 Fire rated. Odorless and emission free. Interior use only in dry areas. Made in a mold in 2 pieces, tape & mud seam. No customization, cut to height. Finished Composites ZeamentTM Exterior Composite Lite weight Portland cement, sand, alkali resistant fibers, aggregates, polymer adhesives & water. Smooth, internally pigmented 12 colors. Sandblasted for Stone look. Exterior Use, Hurricane, earthquake zones, can be submerged in water. Meets ASTM-E84 Fire rating. Oderless & emission free safe for indoor use. Made with natural raw materials can experience light variation in color and texture. Molded in 2 parts - Seam remains as a reveal. No Base StoneMoldTM Interior Composite Molded stone: Alpha gypsum, pigment, aggregates, water & polymers. Looks like natural stone. Weight 2-5 lbs/foot. Sealed with a clear finish. Made with natural raw materials and may experience slight variation in color and texture. Molded in 2 Parts - Seam remains as a reveal. Standard Greek Doric Columns Code Height Top Shaft Bottom Cap Width IPGD /8 (173.6cm) 14-1/8 (35.8cm) 18 (45.7cm) 19-1/2 (49.5cm) IPGD /8 (2.72m) 11 (27.94cm) 14 (34.5cm) 15-3/16 (38.5cm) IPGD /2 (2.73m) 25 (63.5cm) 30 (76.2cm) 34 (86.36cm) IPGD /8 (3.23m) 14-1/8 (35.8cm) 18 (45.72cm) 20-1/2 (52cm) IPGD (3.42m) 12-3/4 (32.3cm) 16 (40.64cm) 16-15/16 (43cm) IPGD Ft-7-3/8 (8.1m) 34 (86.3cm) 42 (106.68cm) 48 (121.92cm) * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 39

Roman Corinthian Unfinished Materials 24 Hardwoods (Custom Sizes Interior/Exterior) Hand Crafted Custom heights & diameters Multi-Part Order Whole or Split for Pilaster / Post Wrap Interior:

Water, rot, insect resistant. Cuts like wood and can be split for post wrap or pilaster application. No customization.

No customization, cut to height. Unfinished Composites Fiberglass (FRP - Interior / Exterior Composite) Gelcoat, polyester resin & glass fibers. Lite weight 2-3lbs / SqFoot.

34 Roman Corinthian Unfinished Materials 24 Hardwoods (Custom Sizes Interior/Exterior) Hand Crafted Custom heights & diameters Multi-Part Order Whole or Split for Pilaster / Post Wrap Interior: Fingerjoint Pine (Paint only) wall thickness 1-1/4 (3.17cm) Stain Grade: AmPoplar, Maple, Sap Maple, Basswood, Ash, Birch, Red Oak, White Oak, African Mahogany, Beech, Alder, Cherry, Walnut Wall thickness 1-1/2 (3.81cm) Exterior: White Pine, Knotty Pine, Clear Pine, Western Red Cedar ArchPolymerTM (Interior / Exterior Composite) Hi-density polyurethane with consistency of white pine, primed white. Water, rot, insect resistant. Cuts like wood and can be split for post wrap or pilaster application. No customization. PolyCompTM (Load Bearing Interior / Exterior) 70% calcium carbonate, 5% marble chips, 25% Polyester Resins. Meets ASTM-E84 Fire rated. Order whole or split for post wrap or pilaster. No customization, cut to height. Unfinished Composites Fiberglass (FRP - Interior / Exterior Composite) Gelcoat, polyester resin & glass fibers. Lite weight 2-3lbs / SqFoot. Weather resistant for earthquake and hurricane zones. Meets ASTM-E84 Fire rating. Water resistant for fountains & water displays. Mold in 2 pieces, Bondo seam. No customization, cut to height. NeoPlasterTM (GRG - Interior Composite) Alpha gypsum, cement, water, re-enforced with glass fibers. Lite weight 2-3 lbs per square foot. Meets ASTM-E84 Fire rated. Odorless and emission free. Interior use only in dry areas. Made in a mold in 2 pieces, tape & mud seam. No customization, cut to height. Finished Composites ZeamentTM Exterior Composite Lite weight Portland cement, sand, alkali resistant fibers, aggregates, polymer adhesives & water. Smooth, internally pigmented 12 colors. Sandblasted for Stone look. Exterior Use, Hurricane, earthquake zones, can be submerged in water. Meets ASTM-E84 Fire rating. Oderless & emission free safe for indoor use. Made with natural raw materials can experience light variation in color and texture. Molded in 2 parts - Seam remains as a reveal. StoneMoldTM Interior Composite Molded stone: Alpha gypsum, pigment, aggregates, water & polymers. Looks like natural stone. Weight 2-5 lbs/foot. Sealed with a clear finish. Made with natural raw materials and may experience slight variation in color and texture. Molded in 2 Parts - Seam remains as a reveal. * All specifications subject to change without notice Columns Page 40

Custom Roman Corinthian Smooth or Fluted Full/Half => G => Usage: Interior Exterior How many Whole <= A <= B <= F1 <= F2 <= C <= D Splitting Options PART D Square Plynth (Circle) Split for Post Wrap

35 Custom Roman Corinthian Smooth or Fluted Full/Half => G => Usage: Interior Exterior How many Whole <= A <= B <= F1 <= F2 <= C <= D Splitting Options PART D Square Plynth (Circle) Split for Post Wrap Width: Size of Post to Wrap Depth: Height: Engaged Split in 1/2 up against wall Engaged Split 3/4 Wedged for Outside Corner PART 1 A) Standard Capital select material Custom Capital Minimums vary per material Top Width & Depth Height Bottom Circle Diameter PART 2 -SHAFT Tapered Entasis Taper Stops 2/3rds down shaft Non Tapered - Straight Smooth OR Fluted Flutes Start from Top of Shaft Flutes Stop from Bottom of Shaft B = Astragal Diameter F1 = Top Shaft Diameter: F2 = Bottom of Shaft Diameter: ATTIC BASE PART C Round Torus Diameter: Height: G= Total Height all Parts: MIX & MATCH MATERIALS 1) CAPITAL Wood Species ArchPolymerTM NeoPlasterTM PolyCompTM Fiberglass ZeamentTM StoneMoldTM 2) SHAFT Smooth or Fluted Wood Species ArchPolymerTM Following made in 2 parts with reveal NeoPlasterTM PolyCompTM ZeamentTM # StoneMoldTM # Fiberglass 3) BASE: Attic or Tuscan Wood Species ArchPolymerTM NeoPlasterTM PolyCompTM ZeamentTM StoneMoldTM Fiberglass Company: Ship to: Phone Columns Page 41

36 Standard Roman Corinthian Smooth Load Bearing/Decor HW=24 Hardwoods, AP=ArchPolymerTM, PC=PolyCompTM 4C= Fiberglass, NeoPlasterTM, StoneMoldTM, ZeamentTM In the Code TB= Tuscan Base AB=Attic Base 9 FT (2.74m) Material Taper Load Top O/D Bot-O/D I/D IPPC0908S-ABRC PC Yes 10,000 lb 6-1/8 7-5/8 3-3/4 3 FT (91cm) Material Taper Load Top O/D Bot-O/D I/D IPC908P-RC1TB HW Yes No 6-1/2 8 4 IPC908P-RC2TB HW-AP Yes No 6-1/2 8 4 IPC908P-RC4TB HW-AP Yes No 6-1/ /2 IPC908P-RC4AB HW-AP Yes No 6-1/ /2 IPC304P-RC1TB IPC304P-RC1AB IPCNT305P-RC1TB IPCNT306P-RC4TB IPC308P-RC2TB HW Yes No 3 4 Solid HW Yes No 3 4 Solid HW No No HW-AP No No 6-1/4 6-1/4 3-1/2 HW-AP Yes No 6-1/ FT (1.21m) Material Taper Load Top O/D Bot-O/D I/D IPC404P-RC1TB HW Yes No 3 4 Solid IPC404P-RC1AB HW Yes No 3 4 Solid IPCNT406P-RC4TB HW-AP No No 6-1/4 6-1/4 3-1/2 IPC408P-RC1TB HW Yes No 6-1/2 8 4 IPC408P-RC2TB HW-AP Yes No 6-1/2 8 4 IPCNT408P-RC5TB HW-AP Yes No FT (1.52m) Material Taper Load Top O/D Bot-O/D I/D IPC504P-RC1TB IPC504P-RC1AB IPCNT505P-RC3TB IPCNT506P-RC4TB IPPC0508S-ABRC IPC508P-RC1TB IPC508P-RC2TB IPCNT508P-RC5TB 6 FT (1.82m) Material Taper Load Top O/D Bot-O/D I/D IPC604P-RC1TB IPC604P-RC1AB IPCNT605P-RC3TB IPCNT606P-RC4TB IPPC0608S-ABRC IPC608P-RC1TB IPC608P-RC2TB IPCNT608P-RC5TB IPPC0610S-ABRC IPPC0612S-ABRC HW Yes No 3 4 Solid HW Yes No 3 4 Solid HW-AP No No 4-3/4 4-3/4 1-3/4 HW-AP No No 6-1/4 6-1/4 3-1/2 PC Yes 10,000lb 6-1/8 7-5/8 3-3/4 HW Yes No 6-1/2 8 4 HW-AP Yes No 6-1/2 8 4 HP-AP No No PC Yes 14,000lb 8 9-5/8 5-7/8 PC Yes 14,000lb 9-3/8 11-1/2 7 8 FT (2.43m) Material Taper Load Top O/D Bot-O/D I/D IPAPNT806P-RC4TB IPCNT806P-RC4TB IPPC0808S-ABRC IPC808P-RC1TB IPC808P-RC2TB IPC808P-RC4TB IPC808P-RC4AB HW-AP No No /8 HW-AP No No 6-1/4 6-1/4 3-1/2 PC Yes 10,000lb 6-1/8 7-5/8 3-3/4 HW Yes No 6-1/2 8 4 HW-AP Yes No 6-1/2 8 4 HW-AP Yes No 6-1/ /2 HW-AP Yes No 6-1/ /2 HW-AP No No IPAPNT0808P-RC5TB IPAPNT0808P-RC5AB HW-AP No No IPCNT808P-RC5TB HW-AP No No IPPC0810S-ABRC PC Yes 14,000lb 8 9-5/8 5-7/8 IPPC0812S-ABRC PC Yes 14,000lb 9-3/8 11-1/2 7 IPAPNT0812P-RC7TB IPPC0814S-ABRC IPPC0816S-ABRC IPPC0818S-ABRC HW Yes No 3 4 Solid HW Yes No 3 4 Solid HW-AP No No 4-3/4 4-3/4 1-3/4 HW-AP No No 6-1/4 6-1/4 3-1/2 PC Yes 10,000lb 6-1/8 7-5/8 3-3/4 HW Yes No 6-1/2 8 4 HW-AP Yes No 6-1/2 8 4 HW-AP Yes No AP No No /2 PC Yes 18,000lb /8 8-7/8 PC Yes 18,000lb 13-3/4 15-3/4 PC Yes 20,000lb 15-3/8 17-1/4 15-3/4 IPCNT908P-RC5TB IPPC0910S-ABRC IPPC0912S-ABRC IPPC0914S-ABRC IPPC0916S-ABRC IPPC0918S-ABRC HW No No PC Yes 14,000 lb 8 9-5/8 5-7/8 PC Yes 18,000 lb 9-3/8 11-1/2 7 PC Yes 20,000 lb /8 8-7/8 PC Yes 20,000 lb 13-3/4 15-3/8 PC Yes 20,000 lb 15-3/8 17-1/4 15-3/4 10 FT (3.048m) Material Taper Load Top O/D Bot-O/D I/D IPPC1008S-ABRC PC Yes 10,000lb 6-1/8 7-5/8 3-3/4 IPAPNT1008P-RC5TB AP No No IPAPNT1008P-RC5AB AP No No IPPC1010S-ABRC PC Yes 14,000lb 8 9-5/8 5-7/8 IPPC1012S-ABRC PC Yes 18,000lb 9-1/2 11-1/2 7 IPAPNT1012P-RC7TB AP No No /2 IPPC1014S-ABRC PC Yes 20,000 lb /8 8-7/8 IPPC1016S-ABRC PC Yes 20,000 lb 13-3/4 15-3/4 IPPC1018S-ABRC PC Yes 20,000 lb 15-3/8 17-1/4 15-3/4 12 FT (3.657m) Material Taper Load Top O/D Bot-O/D I/D IPAPNT1208P-RC5TB AP No No IPAPNT1208P-RC5AB AP No No IPPC1210S-ABRC PC Yes 14,000lb 8 9-5/8 5-7/8 IPPC1212S-ABRC PC Yes 18,000lb 9-1/2 11-1/2 7 IPAPNT1212P-RC7TB AP No No /2 IPPC1214S-ABRC PC Yes 20,000 lb /8 8-7/8 IPPC1216S-ABRC PC Yes 20,000 lb 13-3/4 15-3/4 IPPC1218S-ABRC PC Yes 20,000 lb 15-3/8 17-1/4 15-3/4 14 FT (4.26m) Material Taper Load Top O/D Bot-O/D I/D IPPC1412S-ABRC PC Yes 18,000 lb 9-5/8 11-5/8 7 IPPC1414S-ABRC PC Yes 20,000 lb /8 8-7/8 IPPC1416S-ABRC PC Yes 20,000 lb 13-3/4 15-3/4 IPPC1418S-ABRC PC Yes 20,000 lb 15-3/8 17-1/4 15-3/4 16 FT (4.87m) Material Taper Load Top O/D Bot-O/D I/D IPPC1612S-ABRC IPPC1614S-ABRC IPPC1616S-ABRC IPPC1618S-ABRC PC Yes 18,000 lb 9-5/8 11-5/8 7 PC Yes 20,000 lb /8 8-7/8 PC Yes 20,000 lb 13-3/4 15-3/4 PC Yes 20,000 lb 15-3/8 17-1/4 15-3/4 18 FT (5.48m) Material Taper Load Top O/D Bot-O/D I/D IPPC1814S-ABRC PC Yes 20,000 lb /8 8-7/8 IPPC1816S-ABRC PC Yes 20,000 lb 13-3/4 15-3/4 IPPC1818S-ABRC PC Yes 20,000 lb 15-3/8 17-1/4 15-3/4 20 FT (6.096m) Material Taper Load Top O/D Bot-O/D I/D IPPC2018S-ABRC PC Yes 20,000 lb 15-1/4 17-5/8 15-3/4 Load Bearing Fiberglass call for prices * For load bearing columns confirm with your structural engineer * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Imperial Productions & Distribution Inc sales@imperialproductions.com Toronto / New York copyright 2016 MRDCI All Rights Reserved Columns Page 42 Vol 7: Spring 2017

Standard Roman Corinthian Fluted Load Bearing/Decor HW=24 Hardwoods, AP=ArchPolymerTM, PC=PolyCompTM 4C= Fiberglass, NeoPlasterTM, StoneMoldTM, ZeamentTM In the Code TB= Tuscan Base AB=Attic Base 10

37 Standard Roman Corinthian Fluted Load Bearing/Decor HW=24 Hardwoods, AP=ArchPolymerTM, PC=PolyCompTM 4C= Fiberglass, NeoPlasterTM, StoneMoldTM, ZeamentTM In the Code TB= Tuscan Base AB=Attic Base 10 FT (3.04m) Material Flutes Tap Load T/O/D B/O/D I/D 3 FT (91cm) Material Flutes Taper Load T/O/D B/O/D I/D IPPC1008F-ABRC PC 16 Y 10,000 lb 6-1/8 7-5/8 3-3/4 IPAP1008F-RC4AB AP x Y No 6-1/2 7-1/8 4-1/4 IPC304F12-RC1TB HW 12 Yes No 3 4 Solid IPAPNT1008F-RC5TB AP x No No 8-1/8 8-1/8 7 IPC304F12-RC1AB HW 12 Yes No 3 4 Solid IPAPNT1008F-RC5ABAP x No No 8-1/8 8-1/8 7 IPC304F24-RC1AB HW 24 Yes No 3 4 Solid IPPC1010F-ABRC PC 20 Yes 14,000 lb 7-1/2 9-3/4 5-7/8 IPCNT306F12-RC4TB HW-AP 12 No No 6-1/4 6-1/4 3-1/2 IPPC1012F-ABRC PC 24 Yes 18,000 lb 9-5/8 11-7/8 7 IPAPNT1012F-RC7TB AP No No 11-7/8 11-7/8 11-7/8 4 FT (1.21m) Material Flutes Taper Load T/O/D B/O/D I/D IPC404F12-RC1TB HW 12 Yes No 3 4 Solid IPC404F12-RC1AB HW 12 Yes No 3 4 Solid IPC404F24-RC1AB HW 24 Yes No 3 4 Solid IPCNT406F12-RC4TB IPC408F12-RC1TB IPC408F12-RC2TB IPC408F24-RC1TB IPC408F24-RC2TB HW-AP 12 No No 6-1/4 6-1/4 3-1/2 HW 12 No No 6-1/2 8 4 HW-AP 12 No No 6-1/2 8 4 HW 24 Yes No 6-1/2 8 4 HW-AP 24 Yes No 6-1/ FT (1.52m) Material Flutes Taper Load T/O/D B/O/D I/D IPC504F12-RC1TB HW 12 Yes No 3 4 Solid IPC504F12-RC1AB HW 12 Yes No 3 4 Solid IPCNT506F12-RC4TB HW-AP 12 No No 6-1/4 6-1/4 3-1/2 6 FT (1.82m) Material Flutes Tap Load T/O/D B/O/D I/D IPCNT606F12-RC4TB HW-AP 12 No No 6-1/4 6-1/4 3-1/2 IPCNT606F12-RC4AB HW-AP 12 No No 6-1/4 6-1/4 3-1/2 IPC608F12-RC1TB HW 12 Yes No 6-1/2 8 4 IPC608F12-RC2TB HW-AP 12 Yes No 6-1/2 8 4 IPCNT608F12-RC5TB HW-AP 12 No No IPPC0610S-ABRC PC 20 Y 14,000lb 8 9-5/8 5-7/8 IPPC0612S-ABRC PC 24 Y 18,000lb 9-3/8 11-1/2 7 8 FT (2.43m) Material Flutes Tap Load T/O/D B/O/D I/D IPCNT806F12-RC4TB HW-AP 12 No No 6-1/4 6-1/4 3-1/2 IPCNT806F12-RC4AB HW-AP 12 No No 6-1/4 6-1/4 3-1/2 IPPC0808F-ABRC PC 16 Y 10,000lb 6-1/4 7-3/4 3-3/4 IPAP0808F-RC4TB AP x Yes No 6-1/2 7-1/8 4-1/4 IPAP0808F-RC4AB AP x Yes No 6-1/2 7-1/8 4-1/4 IPC808F12-RC2TB HW-AP 12 Yes No 6-1/2 8 4 IPC808F12-RC2AB HW-AP 12 Yes No 6-1/2 8 4 IPC808F12-RC4AB HW-AP 12 Yes No 6-1/ /2 IPC808F12-RC1TB HW-AP 12 Yes No 6-1/2 8 4 IPAPNT0808F-RC5TB AP x No No 8-1/8 8-1/8 5-1/8 IPAPNT0808F-RC5AB AP x No No 8-1/8 8-1/8 5-1/8 IPPC0810F-ABRC PC 20 Y 14,000lb 8 9-5/8 5-7/8 IPPC0812F-ABRC PC 24 Y 18,000lb 9-5/8 11-7/8 7 IPAPNT0812F-RC7TB AP x No No 11-7/8 11-7/8 9-3/8 IPAPNT0812F-RC7AB AP x No No 11-7/8 11-7/8 9-3/8 9 FT (2.74m) Material Flutes Taper Load T/O/D B/O/D I/D IPPC0908F-ABRC IPPC0910F-ABRC IPPC0912F-ABRC PC 16 Yes 10,000lb 6-1/4 7-5/8 3-3/4 PC 20 Yes 14,000lb 7-1/2 9-3/4 5-7/8 PC 24 Yes 18,000lb 9-5/8 11-7/ FT (3.65m) Material Flutes Tap Load T/O/D B/O/D I/D IPAPNT1208F-RC5TB AP x No No 8-1/8 8-1/8 5-1/8 IPAPNT1208F-RC5AB AP x No No 8-1/8 8-1/8 5-1/8 IPPC1212F-ABRC PC 24 Y 18,000lb 9-3/8 11-1/2 7 IPAPNT1212F-RC7TB AP x No No 11-7/8 11-7/8 9-3/8 Standard Capitals IPCPROC4 3-3/4 (9.5cm) Height cm Bottom Circle 3-1/8 (7.9cm) A=Abacus Diagonal B=Bottom Circle IPMRD0504 A = 19 (48.3 cm) B = 10-1/2 (26.7 cm) H = 14-1/2 (36.8cm) IPMRD0512 A = 20 (50.8 cm) B = 12 (30.5 cm) H = 17 (43.2cm) H= Height IPCPROC5 5-13/16 (14.7cm) High cm Bottom Circle 4-1/4 (10.7cm) IPMRD0400 A = 6-1/4 (15.9cm) B = 3-1/2 (8.9cm) H = 5 (12.7cm) IPMRD0500 A = 8 (20.3cm) B = 4-3/4 (12cm) H = 7 (17.8cm) IPMRD0502 A = 10-3/4 (27.3cm) B = 6 (15.2cm) H = 8-1/2 (21.5cm) IPMRD0503 A = 16-1/2 (41.9cm) B = 8 (20.3 cm) H = 11-1/2 (29.2cm) * For load bearing columns confirm with your structural engineer * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 43

Standard Roman Corinthian Capitals IPMRD9001 Height 11 27.9cm Bottom Circle 6-1/2 (16.5cm) 11-1/2 (29.

8-7/8 IPPCRC16 17-1/4 16 IPPCRC18 20-1/4 15-3/4 Code Bottom Circle Height Width Depth IPNP7034 5 (12.7cm) 7 (17.78cm) 8-3/4 x 8-3/4 (22.2cm) IPNP7030 6-1/4 (15.8cm) 7-7/8 (19cm) 10 x 10 (25.

38 Standard Roman Corinthian Capitals IPMRD9001 Height cm Bottom Circle 6-1/2 (16.5cm) 11-1/2 (29.2cm) Load Bearing Capitals PolyCompTM Code Top Height Bottom Inside IPPCRC08 6-3/8 8-3/4 6-1/16 3-3/4 IPPCRC10 6-3/8 11-7/8 8-1/4 5-7/8 IPPCRC /8 14-1/2 9-7/8 7 IPPCRC /8 16-1/2 12-1/2 8-7/8 IPPCRC /4 16 IPPCRC /4 15-3/4 Code Bottom Circle Height Width Depth IPNP (12.7cm) 7 (17.78cm) 8-3/4 x 8-3/4 (22.2cm) IPNP /4 (15.8cm) 7-7/8 (19cm) 10 x 10 (25.4cm) IPNP7030A 6-3/4 (17cm) 9 (22.8cm) 11 x 11 (27.9cm) IPNP7027A 8-1/4 (20.9cm) 11-3/8 (28.8) 14-1/4 x 14-1/4 (36cm) IPNP /2 (21.5cm) 11 (27.9cm) 13-5/8 x 13-5/8 (34.6) Code Bottom Circle Height Width Depth IPAPRC /16 (14.7) 10-1/2 (26.6) 10-7/8 10-7/8 (27.6cm) IPAPRC /8 (40.3cm) 17-5/8 (44.7) 22-1/2 22-1/2 (57cm) IPAPRC110 Width 17-3/4 (45cm) Depth 17-3/4 (45cm) High 15-3/4 40cm with rings Bottom Circle No rings 10 (25cm) With rings 12 (30.4cm) Code Bottom Width & Depth Height IPCPROC500 9 (22.8cm) 14-5/8 (37cm) 14 (34.5cm) IPCPROC (25.4cm) 17-3/4 (45cm) 16-1/2 (41.9cm) IPCPROC (30.4cm) 19 (48.2cm) 19 (48.2cm) IPCPROC (40.6cm) 29 IPCPROC (50.8cm) 36 (91.4cm) 30 (76.2cm) * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 44

Custom Rope with Roman Corinthain Capital & Attic Base A) Capital: Astragal on the Capital Yes / No Diameter of Bottom Round of Capital Separation Plate Required Diameter Height No Customization

39 Custom Rope with Roman Corinthain Capital & Attic Base A) Capital: Astragal on the Capital Yes / No Diameter of Bottom Round of Capital Separation Plate Required Diameter Height No Customization unless ordered in volume Available Material: ArchPolymerTM / NeoPlaster-GRG / Fiberglass / PolyCompTM StoneMoldTM / ZeamentTM B: Shaft: Custom Styles & Sizes available in Hardwoods only Styles: Atlanta / French Country / Swiss / Casino / Carousel / San Francisco Shaft Diameter Top & Bottom (less than Top Plate Diameter) C) Attic Base Style: Custom Sizes available in Hardwoods only Diameter Height Square Base: Width Depth Height Standard Rope Roman Corinthain Capital & Attic Base Capital IPNP7027, Rope Diameter 8 (20.3cm) IPC408SP-RC5AB Height 4 Feet (1.21m) IPC608SP-RC5AB Height 6 Feet (1.82m) IPC808SP-RC5AB Height 8 Feet (2.43m) IPC908SP-RC5AB Height 9 Feet (2.74m) IPC1208SP-RC5AB Height 12 Feet (3.65m) Capital IPNP7034, Rope Diameter 5 (12.7cm) IPC405SP-RC4AB Height 4 Feet (1.2m) IPC505SP-RC4AB Height 5 Feet (1.5m) IPC608SP-RC4AB Height 6 Feet (1.8m) Atlanta Carousel Casino French Country Swiss SanFran Columns Page 45

Temple of the Winds <= Square Abacus Attic Base <= Round Torus <= Square Plinth <= Astragal Unfinished Materials 24 Hardwoods (Custom Sizes Interior/Exterior) Hand Crafted Custom heights & diameters

40 Temple of the Winds <= Square Abacus Attic Base <= Round Torus <= Square Plinth <= Astragal Unfinished Materials 24 Hardwoods (Custom Sizes Interior/Exterior) Hand Crafted Custom heights & diameters Multi-Part Order Whole or Split for Pilaster / Post Wrap Interior: Fingerjoint Pine (Paint only) wall thickness 1-1/4 (3.17cm) Stain Grade: AmPoplar, Maple, Sap Maple, Basswood, Ash, Birch, Red Oak, White Oak, African Mahogany, Beech, Alder, Cherry, Walnut Wall thickness 1-1/2 (3.81cm) Exterior: White Pine, Knotty Pine, Clear Pine, Western Red Cedar ArchPolymerTM (Interior / Exterior Composite) Hi-density polyurethane with consistency of white pine, primed white. Water, rot, insect resistant. Cuts like wood and can be split for post wrap or pilaster application. No customization. PolyCompTM (Load Bearing Interior / Ext) 70% calcium carbonate, 5% marble chips, 25% Polyester Resins. Meets ASTM-E84 Fire rated. Order whole or split for post wrap or pilaster. No customization, cut to height. Unfinished Composites Fiberglass (FRP - Interior / Exterior Composite) Gelcoat, polyester resin & glass fibers. Lite weight 2-3lbs / SqFoot. Weather resistant for earthquake and hurricane zones. Meets ASTM-E84 Fire rating. Water resistant for fountains & water displays. Mold in 2 pieces, Bondo seam. No customization, cut to height. NeoPlasterTM (GRG - Interior Composite) Alpha gypsum, cement, water, re-enforced with glass fibers. Lite weight 2-3 lbs per square foot. Meets ASTM-E84 Fire rated. Odorless and emission free. Interior use only in dry areas. Made in a mold in 2 pieces, tape & mud seam. No customization, cut to height. Finished Composites ZeamentTM Exterior Composite Lite weight Portland cement, sand, alkali resistant fibers, aggregates, polymer adhesives & water. Smooth, internally pigmented 12 colors. Sandblasted for Stone look. Exterior Use, Hurricane, earthquake zones, can be submerged in water. Meets ASTM-E84 Fire rating. Oderless & emission free safe for indoor use. Made with natural raw materials can experience light variation in color and texture. Molded in 2 parts - Seam remains as a reveal. Shown here with Tuscan Base StoneMoldTM Interior Composite Molded stone: Alpha gypsum, pigment, aggregates, water & polymers. Looks like natural stone. Weight 2-5 lbs/foot. Sealed with a clear finish. Made with natural raw materials and may experience slight variation in color and texture. Molded in 2 Parts - Seam remains as a reveal. Columns Page 46

41 Custom Temple of the Winds Smooth or Fluted Full/Half => (i) => <= A CAPITAL Select Standard or <= B Custom Capital <= J1 Minimums vary as per material A) Abacus Top Width & Depth <= F1 SHAFT Astragal Diameter <= F2 <= J2 <= G <= H Tapered Entasis Taper Stops 2/3rds down shaft Non Tapered - Straight Smooth OR Fluted How many Fluted J1) Flutes Start from Top of Shaft J2) Flutes Stop from Bottom of Shaft F1 = Top Shaft Diameter: F2 = Bottom of Shaft Diameter: MIX & MATCH MATERIALS CAPITAL Wood Type ArchPolymerTM NeoPlasterTM PolyCompTM Fiberglass ZeamentTM # StoneMoldTM # SHAFT Smooth or Fluted Wood Type ArchPolymerTM Following made in 2 parts with reveal NeoPlasterTM PolyCompTM Fiberglass ZeamentTM # StoneMoldTM # BASE: Attic or Tuscan Wood Type ArchPolymerTM NeoPlasterTM PolyCompTM Fiberglass ZeamentTM # StoneMoldTM # How many Whole How many Split for Post Wrap Size of Post to Wrap Engaged Columns: Split in half (against wall) How many Split Vertically at 3/4 point How many Wedged for Outside Corner ATTIC BASE G = Round Torus Diameter: Height: H = Square Plynth Width: Depth: Height: i = Total Height all Parts: Company: Ship to: Phone Columns Page 47

Standard Temple Winds Smooth Standard Temple Winds Fluted HW=24 Hardwoods, PC=PolyCompTM, 4C= Fiberglass, NeoPlasterTM, StoneMoldTM, ZeamentTM 8 FT (1.

82m) Material Taper Load Top O/D Bot-O/D I/D IPPC0608S-ABTW IPPC0610S-ABTW IPPC0612S-ABTW PC Yes 10,000lbs 6-1/8 7-5/8 4-1/4 PC Yes 14,000lbs 8 9-5/8 5-7/16 PC Yes 18,000lbs 9-3/8 11-1/2 7-5/8 8 FT

42 Standard Temple Winds Smooth Standard Temple Winds Fluted HW=24 Hardwoods, PC=PolyCompTM, 4C= Fiberglass, NeoPlasterTM, StoneMoldTM, ZeamentTM 8 FT (1.82m) Material Flutes Taper Load Top O/D Bot-O/D I/D 5 FT (1.52m) Material Taper Load Top O/D Bot-O/D I/D IPPC0508S-ABTW PC Yes 10,000lb 6-1/8 7-5/8 4-1/4 6 FT (1.82m) Material Taper Load Top O/D Bot-O/D I/D IPPC0608S-ABTW IPPC0610S-ABTW IPPC0612S-ABTW PC Yes 10,000lbs 6-1/8 7-5/8 4-1/4 PC Yes 14,000lbs 8 9-5/8 5-7/16 PC Yes 18,000lbs 9-3/8 11-1/2 7-5/8 8 FT (2.43m) Material Taper Load Top O/D Bot-O/D I/D IPPC0808S-ABTW IPPC0810S-ABTW IPPC0812S-ABTW IPPC0814S-ABTW IPPC0816S-ABTW IPPC0818S-ABTW PC Yes 10,000 lbs 6-1/8 7-5/8 4-1/4 PC Yes 14,000 lbs 8 9-5/8 5-7/16 PC Yes 18,000lbs 9-3/8 11-1/2 7-5/8 PC Yes 20,000lbs /8 8-1/8 PC Yes 20,000lbs 13-3/4 15-3/4 8-1/2 PC Yes 20,000lbs 15-3/8 17-1/4 12-1/2 9 FT (2.74m) Material Taper Load Top O/D Bot-O/D I/D IPPC0908S-ABTW PC Yes 10,000lbs 6-1/8 7-5/8 4-1/4 IPPC0910S-ABTW PC Yes 14,000lbs 8 9-5/8 5-7/16 IPPC0912S-ABTW PC Yes 18,000lbs 9-1/2 11-1/2 7-5/8 IPPC0914S-ABTW PC Yes 20,000lbs /8 8-1/8 IPPC0916S-ABTW PC Yes 20,000lbs 13-3/4 15-3/4 8-1/2 IPPC0918S-ABTW PC Yes 20,000lbs 15-3/8 17-1/4 12-1/2 10 FT (3.04m) Material Taper Load Top O/D Bot-O/D I/D IPPC1008S-ABTW PC Yes 10,000lbs 6-1/8 7-5/8 4-1/4 IPPC1010S-ABTW PC Yes 14,000lbs 8 9-5/8 5-7/16 IPPC1012S-ABTW PC Yes 18,000lbs 9-1/2 11-1/2 7-5/8 IPPC1014S-ABTW PC Yes 20,000lbs /8 8-1/8 IPPC1016S-ABTW PC Yes 20,000lbs 13-3/4 15-3/4 8-1/2 IPPC1018S-ABTW PC Yes 20,000lbs 15-3/8 17-1/4 12-1/2 12 FT (3.65m) Material Taper Load Top O/D Bot-O/D I/D IPPC1210S-ABTW IPPC1212S-ABTW IPPC1214S-ABTW IPPC1216S-ABTW IPPC1218S-ABTW PC Yes 14,000lbs 8 9-5/8 5-7/16 PC Yes 18,000lbs 9-1/2 11-1/2 7-5/8 PC Yes 20,000lbs /8 8-1/8 PC Yes 20,000lbs 13-3/4 15-3/4 8-1/2 PC Yes 20,000lbs 15-3/8 17-1/4 12-1/2 14 FT (4.26m) Material Taper Load Top O/D Bot-O/D I/D IPPC1412S-ABTW IPPC1414S-ABTW IPPC1416S-ABTW IPPC1418S-ABTW PC Yes 18,000lbs 9-5/8 11-5/8 7-5/8 PC Yes 20,000lbs /8 PC Yes 20,000lbs 13-3/4 15-3/4 8-1/2 PC Yes 20,000lbs 15-1/4 17-5/8 12-1/2 16 FT (4.87m) Material Taper Load Top O/D Bot-O/D I/D IPPC1612S-ABTW IPPC1614S-ABTW IPPC1616S-ABTW IPPC1618S-ABTW PC Yes 18,000lbs 9-5/8 11-5/8 7-5/8 PC Yes 20,000lbs /8 PC Yes 20,000lbs 13-3/4 15-3/4 8-1/2 PC Yes 20,000lbs 15-1/4 17-5/8 12-1/2 18 FT (5.48m) Material Taper Load Top O/D Bot-O/D I/D IPPC1814S-ABTW IPPC1816S-ABTW IPPC1818S-ABTW PC Yes 20,000lbs /8 PC Yes 20,000lbs 13-3/4 15-3/4 8-1/2 PC Yes 20,000lbs 15-1/4 17-5/8 12-1/2 IPPC0808F-ABTW IPPC0810F-ABTW IPPC0812F-ABTW PC 16 Yes 10,000lbs 6-1/4 7-3/4 4-1/4 PC 20 Yes 14,000lbs 8 9-5/8 5-7/16 PC 24 Yes 18,000lbs 9-5/8 11-7/8 7-5/8 9 FT (1.82m) Material Flutes Taper Load Top O/D Bot-O/D I/D IPPC0908F-ABTW IPPC0910F-ABTW IPPC0912F-ABTW PC 16 Yes 10,000lbs 6-1/4 7-3/4 4-1/4 PC 20 Yes 14,000lbs 7-1/2 9-3/4 5-7/16 PC 24 Yes 18,000lbs 9-5/8 11-7/8 7-5/8 10 FT (3.048m) Material Flutes Taper Load Top O/D Bot-O/D I/D IPPC1008F-ABTW IPPC1010F-ABTW IPPC1012F-ABTW PC 16 Yes 10,000lbs 6-1/8 7-5/8 4-1/4 PC 20 Yes 14,000lbs 7-1/2 9-3/4 5-7/16 PC 24 Yes 18,000lbs 9-5/8 11-7/8 7-5/8 12 FT (3.65m) Material Flutes Taper Load Top O/D Bot-O/D I/D IPPC1212F-ABTW PC 24 Yes 18,000lbs 9-5/8 11-7/8 7-5/8 for Temple Winds made from Hardwood, PolyCompTM, Fiberglass NeoPlaster, StoneMoldTM, ZeamentTM Tear 20FT (6.09m) Material Taper Load Top O/D Bot-O/D I/D IPPC2018S-ABTW PC Yes 20,000lbs 15-1/4 17-5/8 12-1/2 * For load bearing columns confirm with your structural engineer * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 48

Standard Temple of the Winds Capitals IPCPTOW4 Top 5-1/4 (13.3cm) High 4-1/4 10.79cm Bottom Circle 3-3/16 7.78cm IPCPTOW5 High 5-1/2 13.

6cm Bottom Circle 7 17.7cm Top 11-1/2 (29.2cm) IPPCTW08 Top 10-1/8 (25.7cm) High 7-3/8 18.7cm Bottom Circle 6-5/8 (16.

3cm) PolyCompTM Load Bearing Top 16-1/4 (41.2cm) IPPCTW14 High 14-7/8 37.78cm Bottom Circle 11-11/16 (29.7cm) Top 20-5/8 (52.

7cm) Top 26 (66cm) IPCPTOW7 High 8-3/4 22.2cm Bottom Circle 7 (17.78cm) Top 11-3/8 (28.8cm) IPCPTOW10 High 10 25.4cm Bottom Circle 9 (2.

43 Standard Temple of the Winds Capitals IPCPTOW4 Top 5-1/4 (13.3cm) High 4-1/ cm Bottom Circle 3-3/ cm IPCPTOW5 High 5-1/2 13.9cm Bottom Circle 4 (10cm) Top 7-3/8 (18.7cm) IPCPTOW6 Top 8-3/4 (22.2cm) High 5-3/8 14.2cm Bottom Circle 5 (12.7cm) IPCPTOW8 High 7-3/4 19.6cm Bottom Circle cm Top 11-1/2 (29.2cm) IPPCTW08 Top 10-1/8 (25.7cm) High 7-3/8 18.7cm Bottom Circle 6-5/8 (16.8cm) IPPCTW10 Top 13-1/2 (34.2cm) High 10-3/8 26.3cm Bottom Circle 8-3/16 (20.8cm) IPPCTW12 High 11-7/ cm Bottom Circle 10-3/8 (26.3cm) PolyCompTM Load Bearing Top 16-1/4 (41.2cm) IPPCTW14 High 14-7/ cm Bottom Circle 11-11/16 (29.7cm) Top 20-5/8 (52.3cm) IPPCTW16 Top 22-5/8 (57.4cm) High 16-3/ cm Bottom Circle 14 (35.5cm) IPPCTW18 High cm Bottom Circle 15-1/2 (31.7cm) Top 26 (66cm) IPCPTOW7 High 8-3/4 22.2cm Bottom Circle 7 (17.78cm) Top 11-3/8 (28.8cm) IPCPTOW10 High cm Bottom Circle 9 (2.8cm) Top 15-3/4 (40cm) * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Standard Models Tear Sheets on Columns Page 7

Custom Form: Rope with Temple Capital & Attic Base A) Capital: Astragal on the Capital Yes / No Diameter of Bottom Round of Capital Separation Plate Required Diameter Height No Customization

Styles: Atlanta / French Country / Swiss / Casino / Carousel / San Francisco Shaft Diameter Top & Bottom (less than Top Plate Diameter) C) Attic Base Style: Custom Sizes available in

44 Custom Form: Rope with Temple Capital & Attic Base A) Capital: Astragal on the Capital Yes / No Diameter of Bottom Round of Capital Separation Plate Required Diameter Height No Customization unless ordered in volume Available Material: ArchPolymerTM / NeoPlaster-GRG / Fiberglass / PolyComposite StoneMoldTM / ZeamentTM B: Shaft: Custom Styles & Sizes available in Hardwoods only Styles: Atlanta / French Country / Swiss / Casino / Carousel / San Francisco Shaft Diameter Top & Bottom (less than Top Plate Diameter) C) Attic Base Style: Custom Sizes available in Hardwoods only Round Torus Diameter Height Square Plynth: Width Depth Height Standard Drawings on Atlanta Carousel Casino French Country Swiss SanFran Columns Page 50

Roman Ionic Style <= Attic Base Unfinished Materials 24 Hardwoods (Custom Sizes Interior/Exterior) Hand Crafted Custom heights & diameters Multi-Part Order Whole or Split for Pilaster / Post Wrap

45 Roman Ionic Style <= Attic Base Unfinished Materials 24 Hardwoods (Custom Sizes Interior/Exterior) Hand Crafted Custom heights & diameters Multi-Part Order Whole or Split for Pilaster / Post Wrap Interior: Fingerjoint Pine (Paint only) wall thickness 1-1/4 (3.17cm) Stain Grade: AmPoplar, Maple, Sap Maple, Basswood, Ash, Birch, Red Oak, White Oak, African Mahogany, Beech, Alder, Cherry, Walnut Wall thickness 1-1/2 (3.81cm) Exterior: White Pine, Knotty Pine, Clear Pine, Western Red Cedar ArchPolymerTM (Interior / Exterior Composite) Hi-density polyurethane with consistency of white pine, primed white. Water, rot, insect resistant. Cuts like wood and can be split for post wrap or pilaster application. No customization. PolyCompTM (Load Bearing Interior / Exterior) 70% calcium carbonate, 5% marble chips, 25% Polyester Resins. Meets ASTM-E84 Fire rated. Order whole or split for post wrap or pilaster. No customization, cut to height. Unfinished Composites Fiberglass (FRP - Interior / Exterior Composite) Gelcoat, polyester resin & glass fibers. Lite weight 2-3lbs / SqFoot. Weather resistant for earthquake and hurricane zones. Meets ASTM-E84 Fire rating. Water resistant for fountains & water displays. Mold in 2 pieces, Bondo seam. No customization, cut to height. NeoPlasterTM (GRG - Interior Composite) Alpha gypsum, cement, water, re-enforced with glass fibers. Lite weight 2-3 lbs per square foot. Meets ASTM-E84 Fire rated. Odorless and emission free. Interior use only in dry areas. Made in a mold in 2 pieces, tape & mud seam. No customization, cut to height. Finished Composites ZeamentTM Exterior Composite Lite weight Portland cement, sand, alkali resistant fibers, aggregates, polymer adhesives & water. Smooth, internally pigmented 12 colors. Sandblasted for Stone look. Exterior Use, Hurricane, earthquake zones, can be submerged in water. Meets ASTM-E84 Fire rating. Oderless & emission free safe for indoor use. Made with natural raw materials can experience light variation in color and texture. Molded in 2 parts - Seam remains as a reveal. StoneMoldTM Interior Composite Molded stone: Alpha gypsum, pigment, aggregates, water & polymers. Looks like natural stone. Weight 2-5 lbs/foot. Sealed with a clear finish. Made with natural raw materials and may experience slight variation in color and texture. Molded in 2 Parts - Seam remains as a reveal. Astragal is part of the Capital Columns Page 51

Custom Roman Ionic Smooth or Fluted Full/Half => (i) => <= A <= B <= F1 <= J1 if fluted <= J2 if fluted <= F2 <= G <= H How many Whole How many Split for Post Wrap Size of Post to Wrap PART 1 Capital

Tapered - Straight Smooth OR Fluted How many Fluted J1) Flutes Start from Top of Shaft J2) Flutes Stop from Bottom of Shaft F1 = Top Shaft Diameter: MIX & MATCH MATERIALS CAPITAL Wood Type

46 Custom Roman Ionic Smooth or Fluted Full/Half => (i) => <= A <= B <= F1 <= J1 if fluted <= J2 if fluted <= F2 <= G <= H How many Whole How many Split for Post Wrap Size of Post to Wrap PART 1 Capital Select Standard Capital or Custom Capital Minimums vary as per material A) Abacus Top Width & Depth B) Astragal part of capital Diameter SHAFT Tapered Entasis Taper Stops 2/3rds down shaft or Non Tapered - Straight Smooth OR Fluted How many Fluted J1) Flutes Start from Top of Shaft J2) Flutes Stop from Bottom of Shaft F1 = Top Shaft Diameter: MIX & MATCH MATERIALS CAPITAL Wood Type ArchPolymerTM NeoPlasterTM PolyCompTM Fiberglass ZeamentTM # StoneMoldTM # SHAFT Smooth or Fluted Wood Type ArchPolymerTM Following made in 2 parts with reveal NeoPlasterTM PolyCompTM Fiberglass ZeamentTM # StoneMoldTM # BASE: Attic or Tuscan Wood Type ArchPolymerTM NeoPlasterTM PolyCompTM Fiberglass ZeamentTM # StoneMoldTM # F2 = Bottom of Shaft Diameter: Company: ATTIC BASE G = Round Torus Diameter: Height: Ship to: Engaged Columns: Split in half (against wall) How many Split Vertically at 3/4 point How many Wedged for Outside Corner H = Square Plynth Width: Depth: Height: i = Total Height all Parts: Phone Columns Page 52

47 Standard Roman Ionic Smooth Load Bearing or Decor 3 FT (.91cm) Material Taper Load Top O/D Bot-O/D I/D IPC305P-RI1TB HW Yes No IPC305P-RI1AB HW Yes No IPC306P-RI1TB HW Yes No IPC306P-RI1AB HW Yes No FT (1.21m) Material Taper Load Top O/D Bot-O/D I/D IPC405P-RI1TB HW Yes No IPC405P-RI1AB HW Yes No IPC406P-RI1TB HW Yes No IPC406P-RI1AB HW Yes No FT (1.52m) Material Taper Load Top O/D Bot-O/D I/D IPC505P-RI1TB HW Yes No IPC505P-RI1AB HW Yes No IPC506P-RI1TB HW Yes No IPC506P-RI1AB HW Yes No IPPC0508S-ABRI PC Y 10,000 lbs 6-1/8 7-5/8 4-1/8 6 FT (1.82m) Material Taper Load Top O/D Bot-O/D I/D IPC605P-RI1TB HW Yes No IPC605P-RI1AB HW Yes No IPC606P-RI1TB HW Yes No IPC606P-RI1AB HW Yes No IPPC0608S-ABRI PC Yes 10,000 lbs 6-1/8 7-5/8 4-1/8 IPPC0610S-ABRI PC Yes 14,000 lbs 8 9-5/8 5-3/4 IPPC0612S-ABRI PC Yes 18,000 lbs 9-3/8 11-1/2 7-1/4 8 FT (2.43m) Material Taper Load Top O/D Bot-O/D I/D IPPC0808S-ABRI PC Yes 10,000 lbs 6-1/8 7-5/8 4-1/8 IPPC0810S-ABRI PC Yes 14,000 lbs 8 9-5/8 5-3/4 IPPC0812S-ABRI PC Yes 18,000 lbs 9-3/8 11-1/2 7-1/4 IPPC0814S-ABRI PC Yes 18,000 lbs /8 8-1/2 IPPC0816S-ABRI PC Yes 18,000 lbs 13-3/4 15-3/4 8-1/2 IPPC0818S-ABRI PC Yes 20,000 lbs 15-3/8 17-1/4 11-7/8 9 FT (2.74m) Material Taper Load Top O/D Bot-O/D I/D IPPC0908S-ABRI PC Yes 10,000 lbs 6-1/8 7-5/8 4-1/8 IPPC0910S-ABRI PC Yes 14,000 lbs 8 9-5/8 5-3/4 IPPC0912S-ABRI PC Yes 18,000 lbs 9-3/8 11-1/2 7-1/4 IPPC0914S-ABRI PC Yes 18,000 lbs /8 8-1/2 IPPC0916S-ABRI PC Yes 18,000 lbs 13-3/4 15-3/4 8-1/2 IPPC0918S-ABRI PC Yes 20,000 lbs 15-3/8 17-1/4 11-7/8 10 FT (3.048m) Material Taper Load Top O/D Bot-O/D I/D IPPC1008S-ABRI PC Yes 10,000 lbs 6-1/8 7-5/8 4-1/8 IPPC1010S-ABRI PC Yes 14,000 lbs 8 9-5/8 5-3/4 IPPC1012S-ABRI PC Yes 18,000 lbs 9-3/8 11-1/2 7-1/4 IPPC1014S-ABRI PC Yes 18,000 lbs /8 8-1/2 IPPC1016S-ABRI PC Yes 18,000 lbs 13-3/4 15-3/4 8-1/2 IPPC1018S-ABRI PC Yes 20,000 lbs 15-3/8 17-1/4 11-7/8 12FT (3.65m) Material Taper Load Top O/D Bot-O/D I/D IPPC1210S-ABRI IPPC1212S-ABRI IPPC1214S-ABRI IPPC1216S-ABRI IPPC1218S-ABRI PC Yes 14,000 lbs 8 9-5/8 5-3/4 PC Yes 18,000 lbs 9-3/8 11-1/2 7-1/4 PC Yes 18,000 lbs /8 8-1/2 PC Yes 18,000 lbs 13-3/4 15-3/4 8-1/2 PC Yes 20,000 lbs 15-3/8 17-1/4 11-7/8 14FT (4.26m) Material Taper Load Top O/D Bot-O/D I/D IPPC1412S-ABRI PC Yes 18,000 lbs 9-3/8 11-1/2 7-1/4 IPPC1414S-ABRI PC Yes 18,000 lbs /8 8-1/2 IPPC1416S-ABRI PC Yes 18,000 lbs 13-3/4 15-3/4 8-1/2 IPPC1418S-ABRI PC Yes 20,000 lbs 15-3/8 17-1/4 11-7/8 16FT (4.87m) Material Taper Load Top O/D Bot-O/D I/D IPPC1612S-ABRI IPPC1614S-ABRI IPPC1616S-ABRI IPPC1618S-ABRI PC Yes 18,000 lbs 9-3/8 11-1/2 7-1/4 PC Yes 18,000 lbs /8 8-1/2 PC Yes 18,000 lbs 13-3/4 15-3/4 8-1/2 PC Yes 20,000 lbs 15-3/8 17-1/4 11-7/8 18FT (5.48m) Material Taper Load Top O/D Bot-O/D I/D IPPC1814S-ABRI IPPC1816S-ABRI IPPC1818S-ABRI PC Yes 18,000 lbs /8 8-1/2 PC Yes 18,000 lbs 13-3/4 15-3/4 8-1/2 PC Yes 20,000 lbs 15-3/8 17-1/4 11-7/8 20FT (6.096m) Material Taper Load Top O/D Bot-O/D I/D IPPC2018S-ABRI PC Yes 20,000 lbs 15-1/4 17-5/8 11-7/8 STANDARD: Roman Ionic Fluted 8 FT (2.43m) Material Flutes Taper Load Top O/D Bot-O/D I/D IPPC0808F-ABRI IPPC0810F-ABRI IPPC0812F-ABRI PC 16 Y 10,000 lbs 6-1/4 7-3/4 4-1/8 PC 20 Y 14,000 lbs 8 9-1/2 5-3/4 PC 24 Y 18,000 lbs 9-5/8 11-7/8 7-1/4 9 FT (2.74m) Material Flutes Taper Load Top O/D Bot-O/D I/D IPPC0908F-ABRI PC 16 Y 10,000 lbs 6-1/4 7-5/8 4-1/8 IPPC0910F-ABRI PC 20 Y 14,000 lbs 7-1/2 9-3/4 5-3/4 IPPC0912F-ABRI PC 24 Y 18,000 lbs 9-3/8 11-1/2 7-1/4 10 FT (3.04m) Material Flutes Taper Load Top O/D Bot-O/D I/D IPPC1008F-ABRI PC 16 Y 10,000 lbs 6-1/4 7-5/8 4-1/8 IPPC1010F-ABRI PC 20 Y 14,000 lbs 7-1/2 9-3/4 5-3/4 IPPC1012F-ABRI PC 24 Y 18,000 lbs 9-3/8 11-1/2 7-1/4 12 FT (2.74m) Material Flutes Taper Load Top O/D Bot-O/D I/D IPPC1212F-ABRI PC 24 Y 18,000 lbs 9-5/8 11-7/8 7-1/4 Fiberglass Load Bearing Call for Prices * For load bearing columns confirm with your structural engineer * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 53

Standard Roman Ionic Capitals IPCPRI3A High 3-1/8 7.9cm Top Square 6-1/4 (15.87cm) Scroll to Scroll 8-1/4 (20.95cm) IPCPRI4A Top Square 6-1/4 (15.87cm) Scroll to Scroll 8-3/16 (20.8cm) Adds 2-1/2 6.

9cm Bottom Circle 5-1/4 (13.3cm) IPNP7021 Top Square 10-1/8 (25.7cm) Adds 3-3/4 9.5cm Bottom Circle 4-1/2 (11.4cm) IPNP7024 Top Square 7 (17.7cm) Scroll to Scroll 7-3/4 (19.6cm) Adds 2-5/8 6.

3cm) Inside Hole 4-1/8 (10.4cm) IPNP7018 Top Square 10-1/8 (25.7cm) Adds 5 12.7cm Bottom Circle 7-7/8 (24.7cm) Scroll to Scroll 10-7/8 (27.6cm) IPPCRI12 Top Square 12-3/8 (31.4cm) Adds 5 12.

6cm) Scroll Height IPPCRI09 7 (18cm) Top Square 16-1/2 (42cm) Bottom Circle 10 (25.4cm) Bottom Circle 9-3/4 (30.6cm) Scroll to Scroll 15 (38.1cm) IPPCRI14 Top Square 16-3/8 (41.5cm) Adds 6 15.

48 Standard Roman Ionic Capitals IPCPRI3A High 3-1/8 7.9cm Top Square 6-1/4 (15.87cm) Scroll to Scroll 8-1/4 (20.95cm) IPCPRI4A Top Square 6-1/4 (15.87cm) Scroll to Scroll 8-3/16 (20.8cm) Adds 2-1/2 6.3cm IPCPRI5B Top Square 8 (20.3cm) Scroll to Scroll 10-3/4 (27.3cm) Adds 2-1/2 8.9cm Bottom Circle 3-1/2 (8.89cm) IPCPRI6A Top Square 9-1/8 (23.1cm) Scroll to Scroll 12-1/2 (31.7cm) Adds 2-3/4 6.9cm Bottom Circle 5-1/4 (13.3cm) IPNP7021 Top Square 10-1/8 (25.7cm) Adds 3-3/4 9.5cm Bottom Circle 4-1/2 (11.4cm) IPNP7024 Top Square 7 (17.7cm) Scroll to Scroll 7-3/4 (19.6cm) Adds 2-5/8 6.6cm Bottom Circle 5-1/4 (13.3cm) IPPCRI10 Top Square 10-3/4 (27.3cm) Adds 4-1/4 10.7cm Bottom Circle 5 (12.7cm) IPPCRI08 Top Square 8-3/4 (22.2cm) Adds 3-1/4 8.25cm Bottom Circle 5-1/4 (13.3cm) Inside Hole 4-1/8 (10.4cm) IPNP7018 Top Square 10-1/8 (25.7cm) Adds cm Bottom Circle 7-7/8 (24.7cm) Scroll to Scroll 10-7/8 (27.6cm) IPPCRI12 Top Square 12-3/8 (31.4cm) Adds cm Bottom Circle 10 (25.4cm) Inside Hole 7-1/4 (18.4cm) IPPCRI16 Top Square 16-3/8 (41.5cm) Adds cm Bottom Circle 8-1/2 (21.5cm) Inside Hole 5-3/4 (14.6cm) Scroll Height IPPCRI09 7 (18cm) Top Square 16-1/2 (42cm) Bottom Circle 10 (25.4cm) Bottom Circle 9-3/4 (30.6cm) Scroll to Scroll 15 (38.1cm) IPPCRI14 Top Square 16-3/8 (41.5cm) Adds cm Bottom Circle 11-3/4 (29.8cm) Inside Hole 8-1/2 (21.5cm) IPPCRI18 Top Square 19-1/8 (48.5cm) Adds cm Bottom Circle 11-3/4 (29.8cm) Bottom Circle 15-1/2 (39.3cm) Inside Hole 11-7/8 (30.1cm) * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 54

49 Custom Form: Rope with Temple Capital & Attic Base A) Capital: Astragal on the Capital Yes / No Diameter of Bottom Round of Capital Separation Plate Required Diameter Height No Customization unless ordered in volume Available Material: ArchPolymerTM / NeoPlaster-GRG / Fiberglass / PolyCompTM StoneMoldTM / ZeamentTM B: Shaft: Custom Styles & Sizes available in Hardwoods only Styles: Atlanta / French Country / Swiss / Casino / Carousel / San Francisco Shaft Diameter Top & Bottom (less than Top Plate Diameter) C) Attic Base Style: Custom Sizes available in Hardwoods only Diameter Height Square Base: Width Depth Height Standard Drawings on Atlanta Carousel Casino French Country Swiss SanFran Columns Page 55

Scamozzi Style <= Attic Base Unfinished Materials 24 Hardwoods (Custom Sizes Interior/Exterior) Hand Crafted Custom heights & diameters Multi-Part Order Whole or Split for Pilaster / Post Wrap

50 Scamozzi Style <= Attic Base Unfinished Materials 24 Hardwoods (Custom Sizes Interior/Exterior) Hand Crafted Custom heights & diameters Multi-Part Order Whole or Split for Pilaster / Post Wrap Interior: Fingerjoint Pine (Paint only) wall thickness 1-1/4 (3.17cm) Stain Grade: AmPoplar, Maple, Sap Maple, Basswood, Ash, Birch, Red Oak, White Oak, African Mahogany, Beech, Alder, Cherry, Walnut Wall thickness 1-1/2 (3.81cm) Exterior: White Pine, Knotty Pine, Clear Pine, Western Red Cedar ArchPolymerTM (Interior / Exterior Composite) Hi-density polyurethane with consistency of white pine, primed white. Water, rot, insect resistant. Cuts like wood and can be split for post wrap or pilaster application. No customization. PolyCompTM (Load Bearing Interior / Ext) 70% calcium carbonate, 5% marble chips, 25% Polyester Resins. Meets ASTM-E84 Fire rated. Order whole or split for post wrap or pilaster. No customization, cut to height. Unfinished Composites Fiberglass (FRP - Interior / Exterior Composite) Gelcoat, polyester resin & glass fibers. Lite weight 2-3lbs / SqFoot. Weather resistant for earthquake and hurricane zones. Meets ASTM-E84 Fire rating. Water resistant for fountains & water displays. Mold in 2 pieces, Bondo seam. No customization, cut to height. NeoPlasterTM (GRG - Interior Composite) Alpha gypsum, cement, water, re-enforced with glass fibers. Lite weight 2-3 lbs per square foot. Meets ASTM-E84 Fire rated. Odorless and emission free. Interior use only in dry areas. Made in a mold in 2 pieces, tape & mud seam. No customization, cut to height. Finished Composites ZeamentTM Exterior Composite Lite weight Portland cement, sand, alkali resistant fibers, aggregates, polymer adhesives & water. Smooth, internally pigmented 12 colors. Sandblasted for Stone look. Exterior Use, Hurricane, earthquake zones, can be submerged in water. Meets ASTM-E84 Fire rating. Oderless & emission free safe for indoor use. Made with natural raw materials can experience light variation in color and texture. Molded in 2 parts - Seam remains as a reveal. Astragal is part of the Capital StoneMoldTM Interior Composite Molded stone: Alpha gypsum, pigment, aggregates, water & polymers. Looks like natural stone. Weight 2-5 lbs/foot. Sealed with a clear finish. Made with natural raw materials and may experience slight variation in color and texture. Molded in 2 Parts - Seam remains as a reveal. Columns Page 56

51 Custom Scamozzi Smooth or Fluted Full/Half => (i) => <= A <= B <= F1 <= J1 if fluted <= J2 if fluted <= F2 <= G <= H How many Whole How many Split for Post Wrap Size of Post to Wrap Engaged Columns: Split in half (against wall) How many Split Vertically at 3/4 point How many Wedged for Outside Corner CAPITAL Select Standard or Custom Capital Minimums vary as per material A) Abacus Top Width & Depth B) Astragal part of capital Diameter SHAFT Tapered Entasis Taper Stops 2/3rds down shaft or Non Tapered - Straight Smooth OR Fluted How many Fluted J1) Flutes Start from Top of Shaft J2) Flutes Stop from Bottom of Shaft F1 = Top Shaft Diameter: F2 = Bottom of Shaft Diameter: ATTIC BASE G = Round Torus Diameter: Height: H = Square Plynth Width: Depth: Height: i = Total Height all Parts: MIX & MATCH MATERIALS CAPITAL Wood Type ArchPolymerTM NeoPlasterTM PolyCompTM Fiberglass ZeamentTM # StoneMoldTM # SHAFT Smooth or Fluted Wood Type ArchPolymerTM Following made in 2 parts with reveal NeoPlasterTM PolyCompTM Fiberglass ZeamentTM # StoneMoldTM # BASE: Attic or Tuscan Wood Type ArchPolymerTM NeoPlasterTM PolyCompTM Fiberglass ZeamentTM # StoneMoldTM # Company: Ship to: Phone Columns Page 57

Standard Scamozzi Smooth Load Bearing or Decorative 3 FT (.91cm) Material Taper Load Top O/D Bot-O/D I/D IPC308P-SC4AB1 HW-AP Yes No 6 8 3 IPCNT306P-SCAB1 HW-AP No No 6 6 3 4 FT (1.

52m) Material Taper Load Top O/D Bot-O/D I/D IPPC0508S-ABSC IPAP0508P-SCTB IPC508P-SC4AB1 PC Yes 10,000lbs 6-1/8 7-5/8 5-3/8 AP Yes No 6-5/8 7-5/8 5-5/8 HW-AP Yes No 6 8 3 6 FT (1.

52 Standard Scamozzi Smooth Load Bearing or Decorative 3 FT (.91cm) Material Taper Load Top O/D Bot-O/D I/D IPC308P-SC4AB1 HW-AP Yes No IPCNT306P-SCAB1 HW-AP No No FT (1.21m) Material Taper Load Top O/D Bot-O/D I/D IPAP0408P-SCTB AP Yes No 6-5/8 7-5/8 5-5/8 IPAP0408P-SCAB AP Yes No 6-5/8 7-5/8 5-5/8 IPC408P-SC4AB1 HD-WP Yes No FT (1.52m) Material Taper Load Top O/D Bot-O/D I/D IPPC0508S-ABSC IPAP0508P-SCTB IPC508P-SC4AB1 PC Yes 10,000lbs 6-1/8 7-5/8 5-3/8 AP Yes No 6-5/8 7-5/8 5-5/8 HW-AP Yes No FT (1.82m) Material Taper Load Top O/D Bot-O/D I/D IPPC0608S-ABSC PC Yes 10,000 lbs 6-1/8 8-5/8 5-3/8 IPC608P-SC4AB1 HW-AP Yes No IPPC0610S-ABSC PC Yes 14,000 lbs 8 9-5/8 7-1/4 IPPC0612S-ABSC PC Yes 18,000 lbs 9-3/8 11-1/2 8-5/8 8 FT (2.43m) Material Taper Load Top O/D Bot-O/D I/D IPPC0808S-ABSC IPAP0808P-SCTB IPAP0808P-SCAB IPPC0810S-ABSC IPAPNT0810P-SCAB IPPC0812S-ABSC IPPC0814S-ABSC IPPC0816S-ABSC IPPC0818S-ABSC PC Y 10,000 lbs 6-1/8 7-5/8 5-3/8 AP Y No 6-5/8 7-5/8 5-5/8 AP Y No 6-5/8 7-5/8 5-5/8 PC Y 14,000 lbs 8 9-5/8 7-1/4 AP No No /2 PC Y 18,000 lbs 9-3/8 11-1/2 8-5/8 PC Yes 18,000 lbs /8 11-1/4 PC Yes 18,000 lbs 13-3/4 15-3/4 12-3/4 PC Yes 18,000 lbs 15-3/8 17-1/4 14-3/8 14 FT (4.2m) Material Taper Load Top O/D Bot-O/D I/D IPPC1412S-ABSC IPPC1414S-ABSC IPPC1416S-ABSC IPPC1418S-ABSC PC Yes 18,000 lbs 9-3/8 11-1/2 8-5/8 PC Yes 18,000 lbs /8 11-1/4 PC Yes 18,000 lbs 13-3/4 15-3/4 12-3/4 PC Yes 18,000 lbs 15-3/8 17-1/4 14-3/8 16 FT (4.87m) Material Taper Load Top O/D Bot-O/D I/D IPPC1612S-ABSC PC Yes 18,000 lbs 9-5/8 11-5/8 8-5/8 IPPC1614S-ABSC PC Yes 20,000 lbs /4 IPPC1616S-ABSC PC Yes 20,000 lbs 13-3/4 15-3/4 12-3/4 IPPC1618S-ABSC PC Yes 20,000 lbs 15-1/4 17-5/8 14-3/8 18 FT (5.4m) Material Taper Load Top O/D Bot-O/D I/D IPPC1814S-ABSC PC Yes 20,000 lbs /4 IPPC1816S-ABSC PC Yes 20,000 lbs 13-3/4 15-3/4 12-3/4 IPPC1818S-ABSC PC Yes 20,000 lbs 15-1/4 17-5/8 14-3/8 20 FT (6.9m) Material Taper Load Top O/D Bot-O/D I/D IPPC2018S-ABSC PC Yes 20,000 lbs 15-1/4 17-5/8 14-3/8 Standard Scamozzi Fluted 8 FT (2.43m) Material Flutes Taper Load Top O/D Bot-O/D I/D IPAP0808F-SCTB IPAP0808F-SCAB IPPC0808F-ABSC IPPC0810F-ABSC IPAPNT0810F-SCAB IPPC0812S-ABSC AP Yes No 7-1/16 7-3/8 4-5/8 AP No No 7-1/16 7-3/8 4-5/8 PC 16 Y 10,000 lbs 6-1/4 7-3/4 5-3/8 PC 20 Y 14,000 lbs 8 9-5/8 7-1/4 AP No No 9-7/ /8 PC 24 Y 18,000 lbs 9-5/8 11-7/8 8-5/8 9 FT (2.74m) Material Taper Load Top O/D Bot-O/D I/D IPPC0908S-ABSC PC Yes 10,000 lbs 6-1/8 7-5/8 5-3/8 IPPC0910S-ABSC PC Yes 14,000 lbs 8 9-5/8 7-1/4 IPPC0912S-ABSC PC Yes 18,000 lbs 9-3/8 11-1/2 8-5/8 IPPC0914S-ABSC PC Yes 18,000 lbs /8 11-1/4 IPPC0916S-ABSC PC Yes 18,000 lbs 13-3/4 15-3/4 12-3/4 IPPC0918S-ABSC PC Yes 18,000 lbs 15-3/8 17-1/4 14-3/8 10 FT (3.04m) Material Taper Load Top O/D Bot-O/D I/D IPPC1008S-ABSC PC Yes 10,000 lbs 6-1/8 7-5/8 5-3/8 IPAP1008P-SCTB AP Yes No 6-5/8 7-5/8 5-5/8 IPAP1008P-SCAB AP Yes No 6-5/8 7-5/8 5-5/8 IPPC1010S-ABSC PC Yes 14,000 lbs 8 9-5/8 7-1/4 IPAPNT1010P-SCAB IPPC1012S-ABSC IPPC1014S-ABSC IPPC1016S-ABSC IPPC1018S-ABSC AP No No /2 PC Yes 18,000 lbs 9-3/8 11-1/2 8-5/8 PC Yes 18,000 lbs /8 11-1/4 PC Yes 18,000 lbs 13-3/4 15-3/4 12-3/4 PC Yes 18,000 lbs 15-3/8 17-1/4 14-3/8 9 FT (2.74m) Material Flutes Taper Load Top O/D Bot-O/D I/D IPPC0908F-ABSC PC 16 Y 10,000 lbs 6-1/4 7-5/8 5-1/4 IPPC0910F-ABSC PC 20 Y 14,000 lbs 7-1/2 9-3/4 7-1/4 IPPC0912F-ABSC PC 24 Y 18,000 lbs 9-5/8 11-7/8 8-5/8 10 FT (3.04m) Material Flutes Taper Load T/O/D B/O/D I/D IPPC1008F-ABSC PC 16 Y 10,000 lbs 6-1/4 7-5/8 5-3/8 IPAP1008F-SCTB AP Y No 7-1/16 7-3/8 4-5/8 IPAP1008F-SCAB AP No 7-1/16 7-3/8 4-5/8 IPPC1010F-ABSC PC Yes 14,000lbs 7-1/2 9-3/4 7-1/4 IPAPNT1010F-SCAB AP No No 9-7/ /8 IPPC1012F-ABSC PC 24 Y 18,000 lbs 9-5/8 11-7/8 8-5/8 12 FT (3.6m) Material Flutes Taper Load T/O/D B/O/D I/D IPAPNT1210F-SCAB AP No No 9-7/ /8 IPPC1212F-ABSC PC Yes 18,000 lbs 9-1/2 11-3/4 8-5/8 12 FT (3.65m) Material Taper Load Top O/D Bot-O/D I/D IPPC1210S-ABSC PC Yes 14,000 lbs 8 9-5/8 7-1/4 IPAPNT1210P-SCAB AP No No /2 IPPC1212S-ABSC PC Yes 18,000 lbs 9-3/8 11-1/2 8-5/8 IPPC1214S-ABSC PC Yes 18,000 lbs /8 11-1/4 IPPC1216S-ABSC IPPC1218S-ABSC PC Yes 18,000 lbs 13-3/4 15-3/4 12-3/4 PC Yes 18,000 lbs 15-3/8 17-1/4 14-3/8 * For load bearing columns confirm with your structural engineer * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 58

Standard Scamozzi Capitals ------------------- B --------------------- ------------- B --------------- --------------- Scroll Height C --------------- --------------- Adds to Height of shaft D

3cm) 11-5/8 (29.5cm) 3-3/8 (8.5cm) PC IPPCSC08 6-1/2 (16.5cm) 9-5/8 (24cm) 3-1/4 (8.2cm) AP IPSCA150 6-3/4 (17cm) 11 (27.9cm) 4-5/8 (11.7cm) AP IPSCA151 6-3/4 (17cm) 15-9/16 (39.5cm) 4-15/16 (12.

16cm) AP IPSCA153 8-7/8 (22.5cm) 16-5/8 (42.2cm) 7-1/8 (18cm) AP IPSCA104 9-1/8 (23cm) 16-1/4 (41.2cm) 6-9/16 (15.6cm) 4-5/8 (11.7cm) PC IPPCSC12 9-3/4 (24.7cm) 15-1/2 (39.3cm) 4-7/8 (12.

53 Standard Scamozzi Capitals B B Scroll Height C Adds to Height of shaft D Hole A AP = DECORATIVE: ArchPolymerTM PC = Load Bearing PolyCompTM Material Code A B C D AP IPSCA /8 (14.9cm) 10-1/4 (26cm) 4-1/4 (10.7cm) 2-7/8 (7.3cm) AP IPSCA /16 (16.3cm) 11-5/8 (29.5cm) 3-3/8 (8.5cm) PC IPPCSC08 6-1/2 (16.5cm) 9-5/8 (24cm) 3-1/4 (8.2cm) AP IPSCA /4 (17cm) 11 (27.9cm) 4-5/8 (11.7cm) AP IPSCA /4 (17cm) 15-9/16 (39.5cm) 4-15/16 (12.5cm) AP IPSCA /8 (18cm) 14-11/16 (37.3cm) 6-1/8 (15.5cm) AP IPSCA /2 (21.5cm) 14-1/2 (36.8cm) 5-1/8 (13cm) 3-5/8 (9.2cm) PC IPPCSC10 8-3/4 (22cm) 13-7/8 (35.2cm) 4 (10.16cm) AP IPSCA /8 (22.5cm) 16-5/8 (42.2cm) 7-1/8 (18cm) AP IPSCA /8 (23cm) 16-1/4 (41.2cm) 6-9/16 (15.6cm) 4-5/8 (11.7cm) PC IPPCSC12 9-3/4 (24.7cm) 15-1/2 (39.3cm) 4-7/8 (12.3cm) AP IPSCA /8 (25cm) 17-1/2 (44.4cm) 6-1/2 (16.5cm) 4-1/4 (10.7cm) AP IPMRD (25.4cm) 16-7/8 (42.8cm) 7 (17.7cm) 5 (12.7cm) AP IPSCA (25.4cm) 16-7/16 (41.7cm) 5-3/4 (14.6cm) AP IPSCA /16 (26.5cm) 18-1/2 (47cm) 7-1/2 (19cm) AP IPSCA /8 (28.2cm) 21-13/16 (55.4cm) 5 (12.7cm) AP IPSCA /16 (30.9cm) 18-1/4 (46.3cm) 7-3/4 (19.6cm) AP IPSCA (33cm) 21-5/8 (54.9cm) 9 (22.8cm) AP IPSCA /2 (34.2cm) 23-1/2 (59.6cm) 10-1/2 (26.6cm) 6-3/4 (17cm) AP IPSCA (43.18cm) 26 (66cm) 10-3/4 (27.3cm) 8-1/2 (21.5cm) AP IPSCA (43cm) 28-1/4 (71.7cm) 10-11/16 (27cm) 8-1/2 (21.5cm) PC IPPCSC /4 (31cm) 18-3/8 (46.6cm) 5-1/8 (13cm) PC IPPCSC16 14 (35.5cm) 21 (53.3cm) 6 (15.2cm) PC IPPCSC /2 (39.3cm) 24 (60.9cm) 7-1/8 (18cm) HARDWOOD Solid Wood (no Hole) Code Bottom Circle B (Top) C (Scroll Height ) D (Total Height) IPMRD /2 (11.4cm) 8 (20.3cm) 3 (7.6cm) 2-1/4 (5.7cm) IPMRD /2 (16.5cm) 11-5/8 (29.5cm) 4-1/2 (11.4cm) 3-3/8 (8.5cm) IPMRD /2 (21.5cm) 15 (38.1cm) 5-7/8 (14.9cm) 4-3/8 (11.1cm) IPMRD /2 (26.6cm) 18-1/2 (46.9cm) 7-1/4 (18.4cm) 5-7/16 (13.8cm) * For load bearing columns confirm with your structural engineer * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 59

Custom Form: Rope with Scamozzi & Attic Base A) Capital: Astragal on the Capital Yes / No Diameter of Bottom Round of Capital Separation Plate Required Diameter Height No Customization unless ordered

54 Custom Form: Rope with Scamozzi & Attic Base A) Capital: Astragal on the Capital Yes / No Diameter of Bottom Round of Capital Separation Plate Required Diameter Height No Customization unless ordered in volume Available Material: ArchPolymerTM / NeoPlaster-GRG / Fiberglass / PolyComposite StoneMoldTM / ZeamentTM B: Shaft: Custom Styles & Sizes available in Hardwoods only Styles: Atlanta / French Country / Swiss / Casino / Carousel / San Francisco Shaft Diameter Top & Bottom (less than Top Plate Diameter) C) Attic Base Style: Custom Sizes available in Hardwoods only Diameter Height Square Base: Width Depth Height Standard Drawings on Atlanta Carousel Casino French Country Swiss SanFran Columns Page 60

Custom Form: Tuscan Square Full or Half Column 1) Usage: Interior Exterior 2) Full Column or Cut in Half for Pilaster against wall Reassembly to Wrap Post Post Size 3) Style: Decorative

weight cement, 12 Finishes 4) NeoPlasterTM (GRG) Glass Fiber Re-enforced Gypsum, Interior Decorative Materials for Small Quantity 1) Custom Made Hardwoods to any Size: Circle Type

Pine / White Pine / Western Red Cedar / White Oak 2) PVC Sheet Goods Material: Circle Below 1) Smooth 2) Fluted 3) Panel 1 or 2 Recessed or Raised 4) Tapered Smooth Total Height

55 Custom Form: Tuscan Square Full or Half Column 1) Usage: Interior Exterior 2) Full Column or Cut in Half for Pilaster against wall Reassembly to Wrap Post Post Size 3) Style: Decorative Materials Made from Molds Large Quantity 1) StoneMoldTM: Interior, Stone Like 12 Finishes - larger selection 2) Fiberglass: Interior/Exterior 3) ZeamentTM: Interior / Exterior, lite weight cement, 12 Finishes 4) NeoPlasterTM (GRG) Glass Fiber Re-enforced Gypsum, Interior Decorative Materials for Small Quantity 1) Custom Made Hardwoods to any Size: Circle Type Interior Paint Grade: Basswood / Maple / Fingerjoint Pine / Poplar Interior Stain Grade: Sap Maple / Red Oak / White Oak / Alder Cherry / Walnut / Basswood / Mahogany Exterior: Knotty Pine / White Pine / Western Red Cedar / White Oak 2) PVC Sheet Goods Material: Circle Below 1) Smooth 2) Fluted 3) Panel 1 or 2 Recessed or Raised 4) Tapered Smooth Total Height Quantity: A: Square Capital: Width A B C A B C Depth Height None: B: Astragal Yes No C: Shaft: Width Depth Non Tapered or Tapered Amount of Taper: D: Base/Plinth: D D Width Height Depth Columns Page 61

56 Custom Form: Square Tuscan Base PART 1: Square Top A) Top Width X B) Top Depth: C) Height of Top D) Cove Radius: eg (3/4 ) (or none) PART 2: Square Plinth E) Top Width X F) Top Depth: G) Plinth Height H) Cove Radius: eg (3/4 ) (or none) I) Bottom Square Width J) Bottom Depth H) (C+G) Total Height of all parts: < (A x B) > Circle Hardwood Interior Use Paint Grade: Basswood Maple Fingerjoint Pine AmPoplar Stain Grade: Sap Maple Red Oak / White Oak Alder Cherry Beech Walnut African Mahogany Ash Yellow Birch Exterior Use Knotty Pine White Pine Clear Pine Western Red Cedar White Oak --> H --> --> C --> G --> <-----D B1 B2 <--H B3 < (E x F) > Tuscan Square Base (Made in 2 Parts Solid Wood) Company Name: Ship to Address: Quantity: Contact: Phone: Fax: Columns Page 62

Standard Square Smooth 4 Feet (1.21m) Smooth Non-Tapered Load IPJP8000-TBTC PVC 5-3/4 (14.6cm) no load IPJP8005-TBTC PVC 7-3/4 (19.6cm) no load IPJP8010-TBTC PVC 9-3/4 (24.

57 Standard Square Smooth 4 Feet (1.21m) Smooth Non-Tapered Load IPJP8000-TBTC PVC 5-3/4 (14.6cm) no load IPJP8005-TBTC PVC 7-3/4 (19.6cm) no load IPJP8010-TBTC PVC 9-3/4 (24.7cm) no load IPJP8016-TBTC PVC 11-3/4 (29.8cm) no load 5 Feet (1.52m) Smooth Non-Tapered Load IPJP8001-TBTC PVC 5-3/4 (14.6cm) no load IPAPSQ0506S-TBTC AP 6 (15cm) no load IPAPSQL0506S-TBTC AP 6 (15cm) 10,000lbs IPJP8006-TBTC PVC 7-3/4 (19.6cm) no load IPAPSQ0508S-TBTC AP 8 (20.3cm) no load IPAPSQL0508S-TBTC AP 8 (20.3cm) 10,000 lbs IPJP8011-TBTC PVC 9-3/4 (24.7cm) no load IPJP8017-TBTC PVC 11-3/4 (29.8cm) no load 6 Feet (1.82m) Smooth Non-Tapered Load IPJP8002-TBTC PVC 5-3/4 (14.6cm) no load IPJP8007-TBTC PVC 7-3/4 (19.6cm) no load IPJP8012-TBTC PVC 9-3/4 (24.7cm) no load IPJP8018-TBTC PVC 11-3/4 (29.8cm) no load 8 Feet (2.43m) Smooth Non-Tapered Load IPJP8003-TBTC PVC 5-3/4 (14.6cm) no load IPPCSQ0806S-TBTC PC 5-3/4 (14.6cm) 10,000lbs IPAPSQ0806S-TBTC AP 6 (15cm) no load IPAPSQL0806S-TBTC AP 6 (15cm) 10,000lbs IPJP8008-TBTC PVC 7-3/4 (19.6cm) no load IPPCSQ0808S-TBTC PC 7-15/16 (20cm) 10,000lbs IPAPSQ0808S-TBTC AP 8 (20.3cm) no load IPAPSQL0808S-TBTC AP 8 (20.3cm) 10,000lbs IPPCSQ0810S-TBTC PC 9-3/4 (24.7cm) 12,000lbs IPJP8014-TBTC PVC 9-3/4 (24.7cm) no load IPPCSQ0812S-TBTC PC 11-3/4 (29.8cm) 12,000lbs IPJP8019-TBTC PVC 11-3/4 (29.8cm) no load IPPCSQ0814S-TBTC PC 14-1/8 (35.8cm) 14,000lbs 9 Feet (2.74m) Smooth Non-Tapered Load IPPCSQ0906S-TBTC PC 5-3/4 (14.6cm) 6,000 lbs IPPCSQ0908S-TBTC PC 7-15/16 (20cm) 10,000 lbs IPPCSQ0910S-TBTC PC 9-3/4 (24.7cm) 12,000 lbs IPPCSQ0912S-TBTC PC 11-3/4 (29.8cm) 14,000 lbs IPPCSQ0914S-TBTC PC 14-1/8 (35.8cm) 14,000lbs 10 Feet (3.04m) Smooth Non-Tapered Load IPJP8004-TBTC PVC 5-3/4 (14.6cm) no load IPAPSQ1006S-TBTC AP 6 (15.2cm) no load IPAPSQL1006S-TBTC AP 6 (15.2cm) 10,000 lbs IPJP8009-TBTC PVC 7-3/4 (19.6cm) no load IPPCSQ1008S-TBTC PC 7-15/16 (20cm) 10,000 lbs IPAPSQ1008S-TBTC AP 8 (20.3cm) no load IPAPLSQ1008S-TBTC AP 8 (20.3cm) 10,000 lbs IPPCSQ1010S-TBTC PC 9-3/4 (24.7cm) 12,000 lbs IPJP8015-TBTC PVC 9-3/4 (24.7cm) no load IPPCSQ1012S-TBTC PC 11-3/4 (29.8cm) 14,000 lbs IPJP8020-TBTC PVC 11-3/4 (29.8cm) no load IPPCSQ1014S-TBTC PC 13-7/8 (35.2cm) 14,000 lbs Decor: AP=ArchPolymerTM & PVC PC= Load Bearing PolyCompTM Standard Square Fluted 4 Feet (1.21m) Fluted Non-Tapered Load IPJP8100-TBTC PVC 5-3/4 (14.6cm) no load IPJP8105-TBTC PVC 7-3/4 (19.6cm) no load IPJP8110-TBTC PVC 9-3/4 (24.7cm) no load IPJP8116-TBTC PVC 11-3/4 (29.8cm) no load 5 Feet (1.52m) Fluted Non-Tapered Load IPJP8101-TBTC PVC 5-3/4 (14.6cm) no load IPAPSQ0506F-TBTC AP 6 (15cm) no load IPAPSQL0506F-TBTC AP 6 (15cm) 10,000lbs IPJP8106-TBTC PVC 7-3/4 (19.6cm) no load IPAPSQ0508F-TBTC AP 8 (20.3cm) no load IPAPSQL0508F-TBTC AP 8 (20.3cm) 10,000 lbs IPJP8111-TBTC IPJP8117-TBC PVC 9-3/4 (24.7cm) no load PVC 11-3/4 (29.8cm) no load 6 Feet (1.82m) Fluted Non-Tapered Load IPJP8102-TBTC PVC 5-3/4 (14.6cm) no load IPJP8107-TBTC PVC 7-3/4 (19.6cm) no load IPJP8112-TBTC PVC 9-3/4 (24.7cm) no load IPJP8118-TBTC PVC 11-3/4 (29.8cm) no load 8 Feet (2.43m) Fluted Non-Tapered Load IPJP8103-TBTC PVC 5-3/4 (14.6cm) no load IPAPSQ0806F-TBTC AP 6 (15cm) no load IPAPSQL0806F-TBTC AP 6 (15cm) 10,000lbs IPPCSQ0808F-TBTC PC 7-15/16 (20cm) 10,000lb IPJP8108-TBTC PVC 7-3/4 (19.6cm) no load IPAPSQ0808F-TBTC AP 8 (20.3cm) no load IPAPSQL0808F-TBTC AP 8 (20.3cm) 10,000lbs IPPCSQ0810F-TBTC PC 9-3/4 (24.7cm) 12,000lbs IPJP8114-TBTC PVC 9-3/4 (24.7cm) no load IPJP8119-TBTC PVC 11-3/4 (29.8cm) no load 9 Feet (2.74m) Fluted Non-Tapered Load IPPCSQ0908F-TBTC PC 7-15/16 (20cm) 10,000 lbs IPAPSQ0908F-TBTC AP 8 (20.3cm) no load IPAPSQL0908F-TBTC AP 8 (20cm) 10,000 lbs IPPCSQ0910F-TBTC PC 9-7/8 (25cm) 12,000 lbs IPPCSQ0912F-TBTC PC 11-3/4 (29.8cm) 14,000 lbs 10 Feet (3.04m) Fluted Non-Tapered Load IPJP8104-TBTC PVC 5-3/4 (14.6cm) no load IPAPSQ1006F-TBTC AP 6 (15cm) no load IPAPSQL1006F-TBTC AP 6 (15cm) 10,000 lbs IPJP8109-TBTC PVC 7-3/4 (19.6cm) no load IPAPSQ1008F-TBTC AP 8 (20.3cm) no load IPAPLSQ1008F-TBTC AP 8 (20.3cm) 10,000 lbs IPPCSQ1008F-TBTC PC 8 (20.3cm) 10,000 lbs IPJP8115-TBTC PVC 9-3/4 (24.7cm) no load IPPCSQ1010F-TBTC PC 9-3/4 (24.7cm) 12,000 lbs IPAPSQ1011F-TBTC AP 11-5/8 (29.5cm) no load IPAPSQL1011F-TBTC AP 11-5/8 (29.5cm 10,000 lbs IPPCSQ1012F-TBTC PC 11-3/4 (29.8cm) 14,000 lbs IPJP8120-TBTC PC 11-3/4 (29.8cm) no load 12 Feet (3.65m) Fluted Non-Tapered Load IPPCSQ1212F-TBTC PC 11-3/4 (29.8cm) 14,000 lbs * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 63

Standard Raised Panel 4 Feet (1.21m) Raised Panel Non-Tapered IPJP8200-TBTC PVC 5-3/4 (14.6cm) no load IPJP8205-TBTC PVC 7-3/4 (19.6cm) no load IPJP8210-TBTC PVC 9-3/4 (24.

82m) Raised Panel Non-Tapered IPJP8202-TBTC PVC 5-3/4 (14.6cm) no load IPJP8207-TBTC PVC 7-3/4 (19.6cm) no load IPJP8212-TBTC PVC 9-3/4 (24.7cm) no load IPJP8216-TBTC PVC 11-3/4 (29.

6cm) no load PVC 9-3/4 (24.7cm) no load PVC 11-3/4 (29.8cm) no load PVC 5-3/4 (14.6cm) no load PVC 7-3/4 (19.6cm) no load PC 8 (20.3cm) 10,000lbs PVC 9-3/4 (24.7cm) no load PC 9-3/4 (24.

6cm) no load IPPCSQ1010R-TBTC PC 9-7/8 (25cm) 12,000 lbs IPJP8214-TBTC PVC 9-3/4 (24.7cm) no load IPJP8219-TBTC PVC 11-3/4 (29.8cm) no load IPPCSQ1012R-TBTC PC 11-3/4 (29.8cm) 14,000 lbs 12 Feet (3.

21m) Recessed Panel Non-Tapered IPJP8300-TBTC PVC 5-3/4 (14.6cm) no load IPJP8305-TBTC PVC 7-3/4 (19.6cm) no load IPJP8310-TBTC PVC 9-3/4 (24.7cm) no load IPJP8315-TBTC PVC 11-3/4 (29.

5cm) 10,000lbs IPJP8306-TBTC PVC 7-3/4 (19.6cm) no load IPJP8311-TBTC PVC 9-3/4 (24.7cm) no load IPJP8316-TBTC PVC 11-3/4 (29.8cm) no load 6 Feet (1.

8cm) no load 8 Feet (2.43m) Raised Panel Non-Tapered Load IPJP8303-TBTC PVC 5-3/4 (14.6cm) no load IPAPSQ08065P-TBTC AP 6-1/2 (16.5cm) no load IPAPSQ08065P-TBTC AP 6-1/2 (16.

5cm) 10,000 lbs IPJP8313-TBTC PVC 9-3/4 (24.7cm) no load IPPCSQ0810P-TBTC PC 9-7/8 (25cm) 10,000 lbs IPJP8318-TBTC PVC 11-3/4 (29.8cm) no load IPPCSQ0812P-TBTC PC 11-3/4 (29.8cm) no load 10 Feet (3.

58 Standard Raised Panel 4 Feet (1.21m) Raised Panel Non-Tapered IPJP8200-TBTC PVC 5-3/4 (14.6cm) no load IPJP8205-TBTC PVC 7-3/4 (19.6cm) no load IPJP8210-TBTC PVC 9-3/4 (24.7cm) no load IPJP8215-TBTC PVC 11-3/4 (29.8cm) no load 5 Feet (1.52m) Raised Panel Non-Tapered IPJP8201-TBTC IPJP8206-TBTC IPJP8211-TBTC IPJP8216-TBTC 6 Feet (1.82m) Raised Panel Non-Tapered IPJP8202-TBTC PVC 5-3/4 (14.6cm) no load IPJP8207-TBTC PVC 7-3/4 (19.6cm) no load IPJP8212-TBTC PVC 9-3/4 (24.7cm) no load IPJP8216-TBTC PVC 11-3/4 (29.8cm) no load 8 Feet (2.43m) Raised Panel Non-Tapered Load IPJP8203-TBTC IPJP8208-TBTC IPPCSQ0808R-TBTC IPJP8213-TBTC IPPCSQ0810R-TBTC IPJP8218-TBTC PVC 5-3/4 (14.6cm) no load PVC 7-3/4 (19.6cm) no load PVC 9-3/4 (24.7cm) no load PVC 11-3/4 (29.8cm) no load PVC 5-3/4 (14.6cm) no load PVC 7-3/4 (19.6cm) no load PC 8 (20.3cm) 10,000lbs PVC 9-3/4 (24.7cm) no load PC 9-3/4 (24.7cm) 12,000lbs PVC 11-3/4 (29.8cm) no load 10 Feet (3.04m) Raised Panel Non-Tapered Load IPJP8204-TBTC PVC 5-3/4 (14.6cm) no load IPPCSQ1008R-TBTC PC 8 (20.3cm) no load IPJP8209-TBTC PVC 7-3/4 (19.6cm) no load IPPCSQ1010R-TBTC PC 9-7/8 (25cm) 12,000 lbs IPJP8214-TBTC PVC 9-3/4 (24.7cm) no load IPJP8219-TBTC PVC 11-3/4 (29.8cm) no load IPPCSQ1012R-TBTC PC 11-3/4 (29.8cm) 14,000 lbs 12 Feet (3.65m) Raised Panel Non-Tapered Load IPPCSQ1212R-TBTC PC 11-3/4 x 11-3/4 14,000 lbs Decor: AP=ArchPolymerTM & PVC PC= Load Bearing PolyCompTM Standard Recessed Panel 4 Feet (1.21m) Recessed Panel Non-Tapered IPJP8300-TBTC PVC 5-3/4 (14.6cm) no load IPJP8305-TBTC PVC 7-3/4 (19.6cm) no load IPJP8310-TBTC PVC 9-3/4 (24.7cm) no load IPJP8315-TBTC PVC 11-3/4 (29.8cm) no load 5 Feet (1.52m) Recessed Panel Non-Tapered Load IPJP8301-TBTC PVC 5-3/4 (14.6cm) no load IPAPSQ05065P-TBTC AP 6-1/2 (16.5cm) no load IPAPSQL0506P-TBTC AP 6-1/2 (16.5cm) 10,000lbs IPJP8306-TBTC PVC 7-3/4 (19.6cm) no load IPJP8311-TBTC PVC 9-3/4 (24.7cm) no load IPJP8316-TBTC PVC 11-3/4 (29.8cm) no load 6 Feet (1.82m) Raised Panel Non-Tapered Load IPJP8302-TBTC IPJP8307-TBTC IPJP8312-TBTC IPJP8316-TBTC PVC 5-3/4 (14.6cm) no load PVC 7-3/4 (19.6cm) no load PVC 9-3/4 (24.7cm) no load PVC 11-3/4 (29.8cm) no load 8 Feet (2.43m) Raised Panel Non-Tapered Load IPJP8303-TBTC PVC 5-3/4 (14.6cm) no load IPAPSQ08065P-TBTC AP 6-1/2 (16.5cm) no load IPAPSQ08065P-TBTC AP 6-1/2 (16.5cm) 10,000 lbs IPPCSQ0808P-TBTC PC 7-1/2 (19cm) 10,000lbs IPJP8308-TBTC PVC 7-3/4 (19.6cm) no load IPAPSQ08085P-TBTC AP 8-1/2 (21.5cm) no load IPAPSQL08085P-TBTC AP 8-1/2 (21.5cm) 10,000 lbs IPJP8313-TBTC PVC 9-3/4 (24.7cm) no load IPPCSQ0810P-TBTC PC 9-7/8 (25cm) 10,000 lbs IPJP8318-TBTC PVC 11-3/4 (29.8cm) no load IPPCSQ0812P-TBTC PC 11-3/4 (29.8cm) no load 10 Feet (3.04m) Smooth Non-Tapered Load IPJP8304-TBTC PVC 5-3/4 (14.6cm) no load IPJP8309-TBTC PVC 7-3/4 (19.6cm) no load IPJP8314-TBTC PVC 9-3/4 (24.7cm) no load IPPCSQ1008P-TBTC PC 7-1/2 (19cm) no load IPPCSQ1010P-TBTC PC 9-7/8 (25cm) no load IPPCSQ1012P-TBTC PC 11-3/4 (29.8cm) no load IPJP8319-TBTC PVC 11-3/4 (29.8cm) no load PolyComposite Square Bases Available Separately Item # Inside Square Height IPPCSQTB /4 (14.6cm) 8-1/8 (20.6cm) 4 (10cm) IPPCSQTB (20.3cm) 10-1/2 (26.6cm) 4-1/4 (10.7cm) IPPCSQTB /8 (25cm) 13 (33cm) 5-1/8 (13cm) IPPCSQTB /4 (29.8cm) 14-7/8 (37.7cm) 5-5/8 (14.2cm) IPPCSQTB /8 (35.8cm) 17-5/8 (44.7cm) 5-5/8 (14.2cm) Hardwood Square Bases Fully Customizable IPWSQB04 6-1/2 (16.5cm) 1-1/4 (3cm) IPWSQB05 7-1/2 (19cm) 1-1/4 (3cm) IPWSQB10 13 (33cm) 1-3/4 (4.4cm) IPWSQB06 8-1/2 (21.5cm) 1-1/4 (3cm) IPWSQB12 15 (38cm) 1-3/4 (4.4cm) IPWSQB08 11 (27.9cm) 1-3/4 (3cm) IPWSQB14 17 (43cm) 1-3/4 (4.4cm) * All prices & specifications subject to change without notice, Final products & Measurements may vary from this brochure Columns Page 64

Standard Square Decorative Capitals Roman Corinthan A=Abacus on Diagonal <-------------- A --------------> <-------------- A --------------> <---B ---> IPMRD0549 Height 8-1/2 (21.

4 x 25.4cm) IPMRD0553 Height 16 (40.6cm) A) 20 (50.8cm) B) 12 x 12 (30.5 x 30.4cm) Roman Ionic Square <--------- B ---------> IPAPRC100 High 18 (45.

3cm) IPAPRC104 High 30-7/8 (78cm) A) Top: 41-7/8 x 41-7/8 (106cm) B) Bottom Square 28-5/8 (72.7cm) <--------- B ---------> IPMRDA1636 Height 9-5/8 (24.4cm) A)Top 7-3/4 (19.

3) IPMRDA16312 A) Top Square 20-1/8 (51.1cm) B) Bottom Square 12 (30.48cm) Height 15-1/2 (39.

8cm) IPCPRISQ6 High 1-7/8 (4.7cm) A) Top 10 x 10 (25.4cm) B) Bottom 6-1/2 x 6-1/2 (16.51cm) IPCPRISQ8 High 2-3/4 (6.9cm) A) Top 11 x11 (27.9cm) B) Bottom 7-1/2 x 7-1/2 (19.

6cm) IPMRD0562 High 11-3/4 (29.7cm) Bottom Astragal 7-1/4 (18.4cm) Top 11-3/4 (29.7cm) IPPLY100 Plinth only High 39-1/2 (100cm) Top Ring 11-3/8 (28.

59 Standard Square Decorative Capitals Roman Corinthan A=Abacus on Diagonal < A > < A > <---B ---> IPMRD0549 Height 8-1/2 (21.6cm) A) 12 (30.5cm) B) 6 x 6 (15.2 x 15.2cm) IPMRD0581 Height 11-3/4 (29.8cm) A) 15-1/4 (38.7cm) B) 8 x 8 (20.3 x 20.3cm) IPMRD0552 Height 15 (38.1cm) A) 18 (45.7cm) B) 10 x 10 (25.4 x 25.4cm) IPMRD0553 Height 16 (40.6cm) A) 20 (50.8cm) B) 12 x 12 (30.5 x 30.4cm) Roman Ionic Square IPAPRC100 High 18 (45.7cm) A) Top: 19-3/4 (50cm) B) Bottom Square 12-1/2 (31.7cm) Height 18 (45.7cm) IPAPRC102 High 18 (45.7cm) A) Top: 22-3/4 x 22-3/4 (57.7cm) B) Bottom Square 15-1/2 (39.3cm) IPAPRC104 High 30-7/8 (78cm) A) Top: 41-7/8 x 41-7/8 (106cm) B) Bottom Square 28-5/8 (72.7cm) IPMRDA1636 Height 9-5/8 (24.4cm) A)Top 7-3/4 (19.6cm) B) 6 (15.2cm) IPMRDA1638 A)Top13-3/8 (22.3cm) B)8 (20.3cm) Height 10-3/8 (26.3cm) IPMRDA16310 A)Top16-3/4 (42.5cm) B)10-1/4 (26.3cm) High 12-3/4 (32.3) IPMRDA16312 A) Top Square 20-1/8 (51.1cm) B) Bottom Square 12 (30.48cm) Height 15-1/2 (39.3cm) < A > Victorian Art Deco IPNP7046 Bottom Circle 9-3/8 (23.8cm) Height 4-7/8 (12.3cm) Inside Hole 6-1/2 (16.5cm) Top Diameter 9-3/8 (23.8cm) IPCPRISQ6 High 1-7/8 (4.7cm) A) Top 10 x 10 (25.4cm) B) Bottom 6-1/2 x 6-1/2 (16.51cm) IPCPRISQ8 High 2-3/4 (6.9cm) A) Top 11 x11 (27.9cm) B) Bottom 7-1/2 x 7-1/2 (19.68cm) IPMRD0560 High 6-7/8 (17.4cm) Bottom Astragal 4-1/4 (10.7cm) Top 6-7/8 (17.4cm) IPMRD0561 High 10-1/8 (15.8cm) Bottom Astragal 6-1/4 (15.8cm) Top 10-1/8 (25.6cm) IPMRD0562 High 11-3/4 (29.7cm) Bottom Astragal 7-1/4 (18.4cm) Top 11-3/4 (29.7cm) IPPLY100 Plinth only High 39-1/2 (100cm) Top Ring 11-3/8 (28.9cm) IPPLY101 Column Combo High 135 (343cm) Shaft Diameter 7-7/8 (20cm) Plinth 28 (72cm) IPCPRISQ10 High 3-1/2 (8.89cm) A) Top 15 x 15 (38.1cm) B) Bottom 11 x 11 (27.94cm) IPCPRISQ12 High 3-7/8 (9cm) A) Top 16 x 16 (40.6cm) B) Bottom 12 x12 (30.48cm) Scamozzi Square IPSCA102 A= 7-1/8 (18cm) x 7-1/8 (18cm) B=14-11/16 (37cm) C= 6-1/8 (15.5cm) IPSCA110 A= 17 (43cm) x 17 (43cm) B=28-1/4 (71.7cm) C=10-11/16 (27cm) <- A -> B C Columns Page 65

Custom Belly Columns Custom Chart <= Tuscan Capital

Half Mid Shaft <= Bottom of Shaft Material: Custom

Octagon <= Octagon is Non Tapered Supply the

provide the diameter as if it were round Material: *

For load bearing applications use a metal post *

60 Custom Belly Columns Custom Chart <= Tuscan Capital <= Top of Shaft <= Half Mid Shaft <= Mid Shaft <= Half Mid Shaft <= Bottom of Shaft Material: Custom Octagons Custom Modernism <= Supply Drawing of Octagon <= Octagon is Non Tapered Supply the Measurements of the Shaft <= Easy way to measure provide the diameter as if it were round Material: * All are sold as decorative items only. For load bearing applications use a metal post * Measurements are approximate & Final Product may vary from this brochure Columns Page 66

Filament Wound Architectural Columns: Blending Tradition with Technology

Filament Wound Architectural Columns: Blending Tradition with Technology These unique patented filament wound columns help preserve the past with authentic, perfectly detailed structure that is architecturally