DIVISION 06 WOOD, PLASTICS, AND COMPOSITES
|
|
- Rosanna Dickerson
- 5 years ago
- Views:
Transcription
1 DIVISION 06 WOOD, PLASTICS, AND COMPOSITES WOOD, PLASTICS, AND COMPOSITES Maintenance of Wood, Plastics, and Composites Maintenance of Rough Carpentry Rough Carpentry Rehabilitation Rough Carpentry Restoration Rough Carpentry Preservation Maintenance of Finish Carpentry Finish Carpentry Rehabilitation Finish Carpentry Restoration Finish Carpentry Preservation Maintenance of Architectural Woodwork Architectural Woodwork Cleaning Architectural Woodwork Refinishing Architectural Woodwork Restoration Maintenance of Structural Plastics Maintenance of Plastic Fabrications Plastic Cleaning Plastic Rehabilitation Plastic Restoration Plastic Preservation Maintenance of Structural Composites Maintenance of Composite Assemblies Composite Cleaning Composite Rehabilitation Composite Restoration Composite Preservation Common Work Results for Wood, Plastics, and Composites Wood, Plastic, and Composite Fastenings Wood Treatment Fire Retardant Wood Treatment Preservative Wood Treatment Long Term Wood Treatment Eradication of Insects in Wood Antiseptic Treatment of Wood Shop Applied Wood Coatings Schedules for Wood, Plastics, and Composites Schedules for Rough Carpentry Nailing Schedule Wood Beam Schedule Plywood Shear Wall Schedule Plywood Web Joist Schedule Wood Truss Schedule
2 Schedules for Finish Carpentry Schedules for Architectural Woodwork Schedules for Structural Plastics Schedules for Plastic Fabrications Schedules for Structural Composites Schedules for Composite Assemblies Commissioning of Wood, Plastics, and Composites ROUGH CARPENTRY Miscellaneous Rough Carpentry A. LEED Submittals: 1. Certificates for Credit MR 7: Chain of custody certificates indicating that products specified documentation that manufacturer is certified for chain of custody by an FSC accredited certification body. Include statement indicating cost for each certified wood product. 2. Product Data for Credit EQ 4.1: For adhesives, including printed statement of VOC content. 3. Product Data for Credit EQ 4.4: For composite wood products, documentation indicating that product contains no urea formaldehyde. 4. Certificates for Credit MR 5.1 and Credit MR 5.2: For products and materials required to comply with requirements for regional materials indicating location and distance from Project of material manufacturer and point of extraction, harvest, or recovery for each raw material. Include statement indicating cost for each regional material and the fraction by weight that is considered regional. END SECTION Curved Wood Members Wood Framing Engineered Wood Products Mechanically Graded Lumber Structural Panels Cementitious Reinforced Panels Stressed Skin Panels
3 Heavy Timber Log Construction Period Horizontal Log Work Pole Construction Heavy Timber Construction Heavy Timber Pier Construction Treated Wood Foundations Wood Decking Wood Floor Decking Carvel Planking Wood Roof Decking Timber Decking Laminated Wood Decking Wood Patio Decking Sheathing B. LEED Submittals: 5. Certificates for Credit MR 7: Chain of custody certificates indicating that products specified documentation that manufacturer is certified for chain of custody by an FSC accredited certification body. Include statement indicating cost for each certified wood product. 6. Product Data for Credit EQ 4.1: For adhesives, including printed statement of VOC content. 7. Product Data for Credit EQ 4.4: For composite wood products, documentation indicating that product contains no urea formaldehyde. END SECTION Insulating Sheathing Subflooring Underlayment Acoustical Underlayment Wood Board Sheathing Wood Panel Product Sheathing Gypsum Sheathing Moisture Resistant Sheathing Board
4 Cementitious Sheathing Shop Fabricated Structural Wood Laminated Veneer Lumber Parallel Strand Lumber Wood I Joists Metal Web Wood Joists Rim Boards Shop Fabricated Wood Trusses Glued Laminated Construction Glued Laminated Beams Glued Laminated Columns FINISH CARPENTRY Exterior Finish Carpentry Interior Finish Carpentry Millwork Standard Pattern Wood Trim Prefinished Paneling Prefinished Hardboard Paneling Prefinished Plywood Paneling Board Paneling Profile Board Paneling ARCHITECTURAL WOODWORK Exterior Architectural Woodwork C. LEED Submittals: 1. Certificates for Credit MR 7: Chain of custody certificates indicating that products specified documentation that manufacturer is certified for chain of custody by an FSC accredited certification body. Include evidence that mill is certified for chain of custody by an FSCaccredited certification body. a. Include statement indicating costs for each certified wood product. END SECTION
5 Interior Architectural Woodwork LEED Submittals: 1. Product Data for Credit EQ 4.1: For installation adhesives, including printed statement of VOC content. 2. Product Data for Credit EQ 4.4: a. For each composite wood product used, documentation indicating that the bonding agent contains no urea formaldehyde. b. For each adhesive used, documentation indicating that the adhesive contains no urea formaldehyde. 3. Product Data for Credit(s) MR 4.1 and MR 4.2: For products having recycled content, documentation indicating percentages by weight of postconsumer and preconsumer recycled content. a. Include statement indicating costs for each product having recycled content. 4. Certificates for Credit MR 7: Chain of custody certificates certifying that products specified evidence that mill is certified for chain of custody by an FSC accredited certification body. a. Include statement indicating costs for each certified wood product. END OF SECTION Architectural Wood Casework Wood Veneer Faced Architectural Cabinets Plastic Laminate Clad Architectural Cabinets Wood Paneling Solid Lumber Paneling Wood Veneer Paneling Plastic Laminate Faced Wood Paneling Wood Stairs and Railings Wood Stairs Wood Railings
6 Ornamental Woodwork Wood Turnings Wood Pilasters Wood Grilles Wood Corbels Wood Cupolas Wood Finials Wood Mantels Wood Pediment Heads Wood Posts and Columns Wood Trim Wood Door and Window Casings Wood Aprons Wood Base and Shoe Moldings Wood Chair Rails Wood Cornices Wood Fascia and Soffits Wood Stops, Stools, and Sills Splicing of Wooden Components Wood Frames Exterior Wood Door Frames Interior Wood Door Frames Ornamental Wood Frames Stick Built Wood Windows Wood Veneer Frames Wood Screens and Exterior Wood Shutters Wood Screens Exterior Wood Blinds Exterior Wood Shutters STRUCTURAL PLASTICS Structural Plastic Shapes and Plates Plastic Lumber Plastic Structural Assemblies Plastic Decking Solid Plastic Decking PLASTIC FABRICATIONS Simulated Stone Fabrications Cultured Marble Fabrications Solid Surfacing Fabrications
7 Quartz Surfacing Fabrications Plastic Railings Plastic Paneling Plastic Simulated Wood Trim Custom Ornamental Simulated Woodwork STRUCTURAL COMPOSITES Structural Composite Shapes and Plates Composite Lumber Composite Structural Assemblies Composite Joist Assemblies Composite Decking Composite Structural Decking COMPOSITE FABRICATIONS Composite Railings Glass Fiber Reinforced Plastic
In the design development phase, submit finish and material selections to Facilities Management Planning Group for review.
09 00 00 FINISHES 09 01 00 Maintenance of Finishes 09 01 20 Maintenance of Plaster and Gypsum Board 09 01 20.91 Plaster Restoration 09 01 30 Maintenance of Tiling 09 01 30.91 Tile Restoration 09 01 50
More informationSECTION STRUCTURAL INSULATED PANELS
SECTION 06120 STRUCTURAL INSULATED PANELS Copyright 2011-2012 Korwall Industries, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. Structural Insulated Roof Panels. B. Structural Insulated
More informationMulti-Institutional Academic Health Science & Research Center Evansville, IN
SECTION 061600 - SHEATHING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationCarpentry. The following describes the scope and sequence of instruction for Carpentry.
Carpentry The Montgomery County Students Construction Trades Foundation, Inc has developed a comprehensive construction technology program designed to prepare students for a rewarding career in the construction
More informationTABLE OF CONTENTS DIVISION 1 GENERAL REQUIREMENTS
AIA General Conditions... GC-1 to GC-44 Amendments to General Conditions... AM-1 to AM-2 Supplements to General Conditions... SU-1 to SU-7 00200 Instructions To Bidders... 1 3 00201 Contractor s Bidding
More informationCHAPTER 6 TYPES OF CONSTRUCTION
CHAPTER 6 TYPES OF CONSTRUCTION SECTION 61 GENERAL 61.1 Scope. The provisions of this chapter shall control the classification of buildings as to type of construction. SECTION 62 CONSTRUCTION CLASSIFICATION
More informationDIVISION 6 - WOOD AND PLASTICS. Section General Discussion. Introduction
Section 06000 - General Discussion This General Discussion Section contains material which is important to successful millwork, wood framing and wood structural installations, in construction projects.
More informationSECTION WOOD FRAMING. A. Includes But Not Limited To 1. Furnish and install wood framing and blocking as described in Contract Documents.
SECTION 06110 WOOD FRAMING PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Furnish and install wood framing and blocking as described in Contract Documents. B. Products Installed But Not Supplied
More informationCOPYRIGHTED MATERIAL. Contents. 1 Making Buildings 3. 3 Wood Foundations and. Preface to the Sixth Edition xi. Sitework 31
Contents Preface to the Sixth Edition xi 1 Making Buildings 3 Learning to Build 4 Buildings and the Environment 5 The Work of the Design Professional 11 The Work of the Construction Professional 19 Trends
More informationGypsum Board
University of New Hampshire University of New Hampshire Scholars' Repository Division 09 Finishes Chapter 5 Technical Construction and Renovation Standards 1-25-2013 092900 - Gypsum Board Sandra Hickey
More informationLEED TM POINT DOCUMENTATION
LEED TM POINT DOCUMENTATION 1100 SUMMARY LEED PROGRAM 1101 REQUIREMENTS 1125 SUMMARY OF MULTIPLE CONTRACTS WORK 1140 RESTRICTIONS 1210 ALLOWANCES 1230 ALTERNATES 1250 CONTRACT MODIFICATION PROCEDURES 1270
More informationPart 1: Vocabulary Select the best answer and write the corresponding letter in the space provided.
Name: Date: References: Architecture: Residential Drafting and Design (Chapter 18) at http://www.g wonlinetextbooks.com/. ***Use the classroom Username and Password to access the textbook, not your personally
More informationSECTION WOOD FRAMING. A. Includes But Not Limited To: 1. Furnish and install wood framing and blocking as described in Contract Documents.
SECTION 06 1100 WOOD FRAMING PART 1 - GENERAL 1.1 SUMMARY A. Includes But Not Limited To: 1. Furnish and install wood framing and blocking as described in Contract Documents. B. Products Installed But
More informationPlywood, Composite Wood Products, High-Pressure Laminates
Section 5 Plywood, Composite Wood Products, High-Pressure Laminates Contents 5.0.0 American Plywood Association (APA) grading guidelines 5.1.0 Plywood types and typical applications 5.1.1 APA-registered
More informationDIVISION 05 METALS Commissioning of Metals STRUCTURAL METAL FRAMING Structural Steel Framing
DIVISION 05 METALS 05 00 00 METALS 05 01 00 Maintenance of Metals 05 01 10 Maintenance of Structural Metal Framing 05 10 20 Maintenance of Metal Joists 05 10 30 Maintenance of Metal Decking 05 10 40 Maintenance
More informationTABLE OF CONTENTS Structural Library
Title Description DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS 000101 Project Title Page Project Manual title page. 000107 Seals Page For seals of design professionals on Project Manual. 000115
More informationProdukt Declaration - LEED 2009 New Construction And Major Renovations NC & CS
Product Rating The timber product does not contain added urea-formaldehyde resins and contribute to achieve one LEED credit within IEQ Credit 4.4. The product contains 35% recycled materials and contribute
More informationTABLE OF CONTENTS Updated 1/2014 SECTION TITLE DATE
TABLE OF CONTENTS SECTION TITLE DATE Division 00 Procurement and Contracting Requirements 000101... Project Title Page 000116... CAD Standards 001116... Invitation to Bid 002113... Instructions to Bidders
More informationPRODUCT CATALOG. The following categories highlight the MBS product catalog for the various types of materials, including but not limited to:
PRODUCT CATALOG Metro Building Suppliers (MBS) is designed as a one-stop shopping source for contractors, construction managers, corporations, and government agencies. We carry a full selection of erosion
More informationInterior Architectural Woodwork
University of New Hampshire University of New Hampshire Scholars' Repository Division 06 Wood, Plastics and Composites Chapter 5 Technical Construction and Renovation Standards 1-25-2013 064023 - Interior
More informationSECTION DECORATIVE PLASTIC LAMINATE FINISHES PART 1 - GENERAL 1.1 SUMMARY. A. Section Includes the following Laminates:
Specifier General Notes: This Formica Corporation guide specification covers the basic line of Formica Plastic Laminate Products for interior applications. The purpose of this guide specification is to
More informationTECHNICAL BULLETIN. MR 7.0 Certified Wood Encourage environmentally responsible forest management.
WDMA Window and Door Manufacturers Association 1400 E. Touhy Ave., Suite 470 Des Plaines, IL 60018-3337 Phone 847-299-5200 Fax 847-299-1286 E-mail admin@wdma.com www.wdma.com TECHNICAL BULLETIN Date Issued:
More informationSECTION GYPSUM BOARD
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 29 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
More informationBUILDING CODE REQUIREMENTS
Wood-frame walls and floors offer designers a unique opportunity to provide structures with economy as well as proven energy performance. Where these assemblies are required by the building codes to achieve
More informationSECTION (SECTION 06160) SHEATHING SPECIFIER NOTE:
This is a guidance document with sample specification language intended to be inserted into project specifications on this subject as appropriate to the agency's environmental goals. Certain provisions,
More informationUNIVERSITY OF ROCHESTER DIVISION 01 SPECIFICATIONS November 4, 2013 SECTION SUSTAINABLE DESIGN REQUIREMENTS - LEED FOR NEW
SECTION 018113.13 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification Sections,
More informationWisconsin Technical College System. Curriculum Standards & Program Design Summary CARPENTRY (CONSTRUCTION) APPRENTICE
Program Information Program Curriculum Standards & Program Design Summary 1 CARPENTRY (CONSTRUCTION) APPRENTICE Carpenters construct, erect, install or repair structures and fixtures made of wood; concrete
More informationA. This section includes pre-finished Higuera Hardwoods bamboo flooring and accessories for floors and stairs.
SECTION PART 1 - GENERAL 1.1 SUMMARY A. This section includes pre-finished Higuera Hardwoods bamboo flooring and accessories for floors and stairs. 1.2 RELATED DOCUMENTS A. Related Sections include the
More informationGypsum Board Shaft-Wall Assemblies Gypsum board shaft-wall assembly for elevator and mechanical shafts over 2 stories.
09 00 00 - FINISHES 09 00 00 General Information Architects, in the design of project specific building systems, shall consider the unique characteristics of the generally hot-humid environment of Conway,
More informationA. Product Data: For each type of process and factory-fabricated product.
SECTION 061000 - PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Framing with dimension lumber. 2. Framing with engineered wood products. 3. Shear wall panels. 4. Rooftop equipment bases and support
More informationThe better way to build TM. Installation Manual NAILBASE PANELS
The better way to build TM Installation Manual PANELS November 2018 SIPs Installation Manual Table of Contents Topics General Requirements................................... 3 Materials..............................................
More informationSECTION SHEET MEMBRANE SOUND REDUCTION, CRACK ISOLATION / JOINT BRIDGING, AND WATERPROOFING
SECTION 093000 - SHEET MEMBRANE SOUND REDUCTION, CRACK ISOLATION / JOINT BRIDGING, AND WATERPROOFING PART 1 - GENERAL This specification includes the sheet membrane used for sound reduction, crack isolation
More informationUBC Technical Guidelines Division Edition Furnishings Page 1 of 1 INDEX
UBC Technical Guidelines Division 12 2018 Edition Furnishings Page 1 of 1 INDEX Section 12 00 00 Section 12 20 00 Section 12 30 00 Section 12 35 53 Furnishings Window Coverings and Blinds Fabricated Casework
More informationFRANKLIN VILLAGE APARTMENTS Building I Franklin Street Morristown, NJ Block: 3901 Lots: 4,5,6
PROJECT MANUAL for: FRANKLIN VILLAGE APARTMENTS Building I Morristown, NJ 07960 Block: 3901 Lots: 4,5,6 Owner: Atlantic Health Investment Corp. 200 American Road Morris Plains, NJ 07950 Architect NETTA
More informationFraming Methods Structural Components
Framing Methods Structural Components Balloon Framing *Balloon framing or Eastern framing the exterior studs run from the top of the foundation to the top of the highest level. Benefits of this type of
More informationLISTING INFORMATION OF International Beams - IB Series Joists SPEC ID: 27316
LISTING INFORMATION OF International Beams - IB Series Joists SPEC ID: 27316 International Beams Inc. 2010 Boul. St-Elzear Quest Laval, QC H7L 3N4 CANADA This report is for the exclusive use of Intertek
More information4.1.3 Project Manual
4.1.3 Project Manual (*Section requires Filed Sub-Bid) PROCUREMENT AND CONTRACTING REQUIREMENTS GROUP Division 00 Procurement and Contracting Requirements Section 00 01 03 Project Directory Section 01
More informationassembly an open space between the roof and ceiling of a building attic balloon frame a joist constructed of steel with bars in the verticle web space
assembly two or more interconnected structural components combined to meet a specific function or design requirement attic an open space between the roof and ceiling of a building balloon frame a type
More informationGreat Southern Log Homes
Great Southern Log Homes Material List Log Materials Package: All in One on a Crawl space Great Southern Homes guarantees sufficient quantizes of material provided in the following material list. If there
More informationSECTION SHEET MEMBRANE SOUND REDUCTION, CRACK ISOLATION / JOINT BRIDGING, AND WATERPROOFING
SECTION 093000 - SHEET MEMBRANE SOUND REDUCTION, CRACK ISOLATION / JOINT BRIDGING, AND WATERPROOFING PART 1 - GENERAL This specification includes the sheet membrane used for sound reduction, crack isolation
More informationSmokey Ridge, Christiansburg, Virginia
Smokey Ridge, Christiansburg, Virginia Outline Specifications Prepared by Community Design Studio, LLC Project # 1305, March 15, 2013 The following describes the Sections to be included in each Division
More informationTimber products used to build U.S. single-family houses in 1988
Timber products used to build U.S. single-family houses in 1988 David B. McKeever Robert G. Anderson Abstract Large volumes of lumber and panel products are used annually to build new single-family houses
More informationA. Dimension Lumber: Lumber of 2 inches nominal or greater but less than 5 inches nominal in least dimension.
SECTION 06 10 53 - MISCELLANEOUS ROUGH CARPENTRY PART 1 - [Editor: Display hidden text before editing.] 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
More informationA. Dimension Lumber: Lumber of 2 inches nominal or greater but less than 5 inches nominal in least dimension.
SECTION 06 10 53 MISCELLANEOUS ROUGH CARPENTRY PART 1 [Editor: Display hidden text before editing.] 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
More informationSECTION FLUSH WOOD DOORS
SECTION 081416 PART 1 - GENERAL 1.1 SUMMARY Section Includes: 1. Solid-core doors with wood-veneer faces. 2. Solid-core doors with MDO faces for opaque finish. 3. Pocket doors for folding fire doors. 4.
More informationARCHITECTURE DICTIONARY. Important Architectural Terms
ARCHITECTURE DICTIONARY Important Architectural Terms A: Arch: a curved structure spanning across the top of an opening in a vertical surface Abatement: The wastage of wood when lumber is sawed or planed
More informationR-Matte Plus-3: Insulation for the Building Envelope
Attic and Crawl Space Applications R-Matte Plus-3 may be applied to the interior face of stud walls or roof rafters within attics and crawl spaces to provide a layer of continuous insulation (ci). Simply
More informationSECTION R327.3 STANDARDS OF QUALITY
California Residential Code Section R327 Conformance Checklist Per CRC R327.1.4 The local building official shall, prior to construction, provide the owner or applicant a certification that the building
More informationA. This Section includes the following: 1. Bulletproof modular counter with Security Glazing in following levels:
SECTION 111510 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to
More informationButte County Fire Department Fire Prevention Bureau 176 Nelson Avenue Oroville, CA Office (530)
2016 CBC Chapter 7A and CRC Section R337 (The use of paints, coatings, stains, or other surface treatments are not an approved method of protection as required in this chapter.) The Wildland Urban Interface
More informationCITY SECTION 701A 702A. of this chapter. Protection
CITY OF BIG BEAR LAKE BUILDING CODE CHAPTER 7A MATERIALS AND CONSTRUCTION METHODS FOR EXTERIOR WILDFIRE EXPOSURE SECTION 701A SCOPE, PURPOSE AND APPLICATION 701A.1 Scope. This chapter applies to building
More informationMulti-Institutional Academic Health Science & Research Center Evansville, IN
SECTION 083.3 - SUSTAINABLE DESIGN REQUIREMENTS - LEED 2009 FOR PART - GENERAL. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationChevy Chase Club June 30, 2008 Bowie Gridley Architects
SECTION 092900 - GYPSUM BOARD PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationCAMP BLANDING JOINT TRAINING CENTER CONSTRUCTION AND FACILITY MANAGEMENT OFFICE ARCHITECT S PROJECT # CFMO PROJECT #
SECTION 018113.13 - PART 1 - GENERAL 1.1 SUMMARY A. Section includes general requirements and procedures for compliance with certain USGBC LEED prerequisites and credits needed for Project to obtain LEED
More informationGARAGE MAIN FLOOR PLAN
BUILDING CONTRACTOR/HOME OWNER TO REVIEW AND VERIFY ALL DIMENSIONS, SPECS, AND CONNECTIONS BEFORE CONSTRUCTION BEGINS. SHED TO BE BUILT AS PER IRC, UBC OR CURRENT LOCAL CODE To the best of my knowledge
More informationEnergy Panel Structures, Inc
Energy Panel Structures, Inc. 712-859-3219 www.epsbuildings.com 1. General Information The information provided in this manual is to be used as a general guide. Refer to detailed drawings provided by EPS
More informationWatercrest - Sand Hill - Columbia, SC TABLE OF CONTENTS PROCUREMENT AND CONTRACTING REQUIREMENTS
Watercrest - Sand Hill - Columbia, SC 00 0110-1 TABLE OF CONTENTS DIVISION 00 PROCUREMENT AND CONTRACTING REQUIREMENTS INTRODUCTORY INFORMATION Document 00 0101 Document 00 0110 Project Title Page CONTRACTING
More informationAPPLICATION AND CERTIFICATE FOR PAYMENT
AND CERTIFICATE FOR PAYMENT TO OWNER: MASTER TEMPLATE - SAVE PROJECT FILE 1 DATE: 10/5/2012 PERIOD TO: ARCHITECT: PROJECT NO: CONTRACTOR'S FOR PAYMENT Application is made for payment, as shown below, in
More informationGREEN BRIEF. Conserve. Create. Renew. LSL. LP SolidStart LSL & the Environment
LSL GREEN BRIEF LP SolidStart LSL can help reduce labor and material costs, as well as the risk of callbacks. It can be used for a variety of applications, including roof and floor beams, door and window
More informationUniversity of New Hampshire Scholars' Repository
University of New Hampshire University of New Hampshire Scholars' Repository Division 08 Openings Chapter 5 Technical Construction and Renovation Standards 4-23-2015 081410 - Wood Doors Sandra Hickey sandra.hickey@unh.edu
More informationUniversity of New Hampshire Scholars' Repository
University of New Hampshire University of New Hampshire Scholars' Repository Division 08 Openings Chapter 5 Technical Construction and Renovation Standards 4-23-2015 081410 - Wood Doors Sandra Hickey sandra.hickey@unh.edu
More informationMelton Classics, Inc. Architectural Urethane TM PLASTIC SIMULATED WOOD TRIM SECTION
Melton Classics, Inc. Architectural Urethane TM PLASTIC SIMULATED WOOD TRIM SECTION 066500 PART 1 GENERAL: 1.01 SUMMARY A. Section Includes: Simulated wood trim, including mouldings, balustrade systems.
More informationMold resistant, paperless gypsum board shall be used in bath, kitchen, and janitor locations.
09 00 00 - FINISHES 09 00 00 General Information CCU is continuing its investigation into preferred floor surface materials. In general, selection of floor materials should consider the environmental impact
More informationADDENDUM 2 - JULY 14, 2015
7/9/2015 The Professional(s) of Record above has signed for the following specification sections: DIVISION 1 GENERAL REQUIREMENTS Section 01 10 00 Summary of Work Section 01 25 00 Substitution Procedures
More informationA. Section includes surface preparation and application of wood finishes[.]
SECTION 09 93 00 - STAINING AND TRANSPARENT FINISHING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationMAIN FLOOR PLAN. #G x 14 x 8 Shed - Chicken Coop By SDS-CAD Specialized Design Systems 10'-0" 3'-0" 1'-0" 14'-0" 14'-0" 1'-0" 6'-0" 3'-0"
10'-0" BUILDING CONTRACTOR/HOME OWNER TO REVIEW AND VERIFY ALL DIMENSIONS, SPECS, AND CONNECTIONS BEFORE CONSTRUCTION BEGINS. BARN TO BE BUILT AS PER LOCAL CODE REQUIREMENTS 14'-0" BWP BWP BWP ABWP 101
More informationBid Package 6A General Trades
Bid Package 6A General Trades The successful Subcontractor acknowledges and agrees to the requirements set forth by this bid package and its descriptions and in conjunction with all other Construction
More informationCRM Homes BUILDER Mangan Drafting Jim Mangan
BACK ELEVATION 1/8" = 1' LEFT SIDE 1/8" = 1' RIGHT SIDE 1/8" = 1' ROOF LINE NTS FRONT VIEW 1/4" = 1' A-1 Springfield MO 65610 Fremont Hills Lot 57 12/12 12/12 14/12 14/12 12/12 12/12 12/12 MAIN ROOF PITCH
More informationChapter 23: Wood 2015 INTERNATIONAL BUILDING CODE COMMENTARY 23-1
Chapter 23: Wood General Comments This chapter contains information required to design and construct buildings or structures that include wood or wood-based structural elements, and is organized around
More informationHIGH PERFORMANCE FIRE RETARDANT TREATED WOOD PRODUCTS
TM HIGH PERFORMANCE FIRE RETARDANT TREATED WOOD PRODUCTS Innovators of high performance fire retardant products Class A Rated Fire Retardant Treated Wood Products TM Certified and Listed with Accredited
More informationFundamentals of Building Construction: Materials and Methods
Fundamentals of Building Construction: Materials and Methods Allen, Edward ISBN-13: 9780470074688 Table of Contents Preface. Chapter 1: Making Buildings. Learning to Build. Sustainability. The Work of
More informationA. Product Data: For each type of process and factory-fabricated product.
SECTION 06 1000 - ROUGH CARPENTRY PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Framing with dimension lumber. 2. Framing with engineered wood products. 3. Rooftop equipment bases
More informationEXCEL Medical Waste - Equipment Installation Section SECTION GYPSUM BOARD
SECTION 09 29 00 GYPSUM BOARD PART 1 - GENERAL 1.1 DESCRIPTION This section specifies installation and finishing of gypsum board. 1.2 RELATED WORK A. Installation of steel framing members for walls, partitions,
More informationA. ASTM C635, Standard Specifications for Metal Suspension Systems. B. ASTM C636, Recommended Practice for Installation of Metal Suspension System
SECTION 09510 / 09 51 00 USG TRUE WOOD LINEAR PANELS Product Specification WOOD CEILING PANELS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General
More informationExterior Elevations and Materials
PAGE 01 1. Design Approval. Exterior elevations and related materials, finishes and colors shall be shown on plans submitted for approval by the DRC as part of Design Review or Modifications Review [as
More informationCOMPOSITESIDING
SECTION 074643 COMPOSITE SIDING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS ************************************************************************** SECTION TABLE OF CONTENTS
USACE / NAVFAC / AFCEC / NASA UFGS-09 06 00 (May 2009) Change 1-11/13 ----------------------------- Preparing Activity: USACE Superseding UFGS-09 06 90 (April 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationSECTION STILE AND RAIL WOOD DOORS
SECTION 08 1433 NOTE: THIS SECTION USES THE TERM "ARCHITECT." CHANGE THIS TERM TO IDENTIFY THE DESIGN PROFESSIONAL AS DEFINED IN THE AGREEMENT OR GENERAL CONDITIONS OF THE CONTRACT. PART 1 GENERAL 1.01
More informationProdukt Declaration - LEED 2009 New Construction And Major Renovations NC & CS 22%
Product Rating The timber product does not contain added urea-formaldehyde resins and contribute to achieve one LEED credit within IEQ Credit 4.4. The product contains 38.9% recycled materials and contribute
More informationInterior FRT Wood. References of Previous Model Building Codes
Interior FRT Wood References of Previous Model Building Codes Table of Contents SBBCI Standard Building Code 1 ICBO Uniform Building Code 3 BOCA National Building Code 5 10-SBBCI STANDARD BUILDING CODE
More informationWORK PROCESSES SCHEDULE ACOUSTICAL CARPENTER SPECIALIST O*NET/SOC CODE: RAIS CODE: 0861
WORK PROCESSES SCHEDULE ACOUSTICAL CARPENTER SPECIALIST O*NET/SOC CODE: 47-2081.01 RAIS CODE: 0861 The following schedule is an example of work experience (OJT) and training considered necessary to develop
More informationFaçade Architectural Wall Panel System - Guide Specification 3/11/2017 SECTION FRAMED DECORATIVE PANEL SYSTEMS PART 1 - GENERAL 1.
SECTION 09 7710 FRAMED DECORATIVE PANEL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: Decorative ½ / ¾ (13mm/19mm) thick prefinished panel with preengineered attachment clip along with hardware
More informationby Rollfab Metal Products
by Rollfab Metal Products SECTION 07460 ALUMINUM SIDING AND SOFFITS PART 1 GENERAL 1.2 RELATED SECTIONS 1.3 REFERENCES A. SECTION INCLUDES B. Aluminum Siding. C. Aluminum Soffits. D. Aluminum trim and
More informationStandard test method for wood preservatives by laboratory soil-block cultures
IAS Accreditation Number Company Name Address Contact Name TL-259 257 East Randolph Street Nappanee, Indiana 46550 Dale Arter Director of Testing & Certification Telephone (574) 773-7975 Effective Date
More informationLamit Industries, Inc. 710 Marion Road Columbus, Ohio P-(614) F-(614)
Lamit Industries, Inc. 710 Marion Road Columbus, Ohio 43207 P-(614)444-3010 F-(614)444-4264 info@lamitindustries.com www.lamitindustries.com SECTION 06120 STRUCTURAL INSULATED PANELS PART 1 GENERAL 1.01
More informationCARPENTER TRADE REGULATION
Province of Alberta APPRENTICESHIP AND INDUSTRY TRAINING ACT CARPENTER TRADE REGULATION Alberta Regulation 267/2000 With amendments up to and including Alberta Regulation 119/2018 Current as of June 20,
More informationGeometrik Manufacturing Inc.
PRODUCT: GEO SYSTEM Page 1 PART I GENERAL 1.1 SECTION INCLUDES 1. Linear Acoustical Wood Ceiling System including suspension hardware by Geometrik Manufacturing Inc. 2. Coordination with other trades that
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 12/12/2018
SECTION 08 1416 - FLUSH WOOD DOORS GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationU.S. EDITION RESIDENTIAL CONSTRUCTION DETAILS SAMPLE. A visual guide to construction detailing. Emma Walshaw
RESIDENTIAL CONSTRUCTION DETAILS U.S. EDITION A visual guide to construction detailing Emma Walshaw Contents INTRODUCTION 4 PRINCIPLES OF CONSTRUCTION DETAILING 6 FOUNDATIONS 9 PRINCIPLES OF FOUNDATION
More informationWood and Plastic Laminate Casework Latest revision: October 23, 2014
This guide spec is intended to be used with Architectural Woodwork Standards the quality standard published by the Woodwork Institute, Architectural Woodwork Institute, and the Architectural Woodwork Manufacturer
More informationSUBJECT: NEW 2000 INTERNATIONAL RESIDENTIAL CODE (IRC) DATE:
IRC CODE UPDATES TO: RESIDENTIAL BUILDING CONTRACTORS FROM: GARY STABER, BUILDING OFFICIAL SUBJECT: NEW 2000 INTERNATIONAL RESIDENTIAL CODE (IRC) DATE: 6/1/2003 INTERNATIONAL RESIDENTIAL CODE (IRC) APPLICABILITY:
More informationDRY CONSTRUCTION SYSTEMS
DRY CONSTRUCTION SYSTEMS Adrienn LEPEL BUTE Dry construction systems Prefabricated elements assembly on site Minimal use of water dry construction systems Assembled partitions Suspended ceilings Raised
More informationWOOD I-JOIST AWARENESS GUIDE
WOOD I-JOIST AWARENESS GUIDE American Wood Council Flange Web Flange American Forest & Paper Association WOOD I-JOIST AWARENESS GUIDE The American Wood Council is part of the wood products group of the
More informationWOOD USE IN NONCOMBUSTIBLE BUILDINGS
INTRODUCTION The National Building Code of Canada (NBCC) 1 requires that some buildings be of noncombustible construction under its prescriptive requirements. Its use in certain types of buildings such
More informationAsk for FSC certified products. Ask for PEFC certified products.
Ask for FSC certified products. Ask for PEFC certified products. ABOUT COMPANY Mission - provide solutions to enhance customers product value. Vision - to be a leader among wood based panel producers in
More informationSECTION ROUGH CARPENTRY. B. AWPA (American Wood Preservers Association) Book of Standards. C. WCLIB (West Coast Lumber Inspection Bureau)
SECTION 06112 ROUGH CARPENTRY PART 1 GENERAL 1.01 REFERENCES A. APA (American Plywood Association) B. AWPA (American Wood Preservers Association) Book of Standards C. WCLIB (West Coast Lumber Inspection
More informationCopyright 2002-present, Natural Element Homes naturalelementhomes.com CABIN (2224)
28'-0" 11'-2" Copyright 2002-present, Natural Element Homes naturalelementhomes.com 1-800-970-CABIN (2224) 105'-2 7/8" 29'-6 3/8" DECK 29'-6 3/8" 14'-6 1/2" 25'-3" 14'-6 1/2" 25'-7 1/2" 25'-3 3/8" 26'-4"
More informationEquine Barn LLC 213 Crescent Moon Way Canton, Ga Proposal
Equine Barn LLC 213 Crescent Moon Way Canton, Ga 30114 Proposal 2014 We hereby propose to provide all the materials and labor necessary to build a custom barn located in, Ga for. What is included in the
More information