Mechanical anchor systems
|
|
- Isaac Barber
- 5 years ago
- Views:
Transcription
1 Anchor type Base Approvals Application Mechanical anchor systems Cracked concrete Uncracked concrete Lightweight concrete Aerated concrete Solid brick masonry Hollow brick masonry European Technical Approval Seismic approval Fatigue approval or test report Shock approval Fire tested Heavy duty anchors HDA-T/ -TR/TF/-P/-PR/-PF undercut anchor Anchor fastening for high loads e.g. in steel construction and plant construction HSL-3 heavy duty anchor Fastening heavy loads e.g. from columns, high racks, machines HSL-GR heavy duty anchor Fastening heavy loads Medium and light duty anchors HSC-A(R) /-I(R) safety anchor Safety relevant fastening at facades and ceilings where short embedment depth is required HST/-R/-HCR stud anchor Fastening through in place parts e.g. angles, tracks, channels, wooden beams, etc. HSA/-R/-R2/-F stud anchor Fastening through in place parts like wooden beams, metal sections, columns, brackets, etc. HSV stud anchor Fastening through in place parts HLC sleeve anchor Temporary fastenings in concrete (e.g. formwork), fastening in base of low density = very suitable = may be suitable per application = technical report redundant fastening 8 09 / 2012
2 Advantages Drill bit diameter resp. anchor size Steel, galvanised. Specification Setting Page Stainless steel A2 (1.4303) Stainless steel A4 (1.440 HCR steel (1.4529) External thread Internal thread Pre-setting Through-fastening Automatic undercutting High load capacity Approved for all dynamic loads Integrated plastic section to telescope and pull down tightly The bolt can be retorqued Integrated plastic section to telescope and pull down tightly The bolt can be retorqued mm M10 M mm M8 M mm M8 M Automatic undercutting Small edge distances and spacings Small setting depth Quick and simple setting operation Setting mark Safety wedge for certain follow up expansion Three setting depths Setting mark Extremely ductile steel for high bending capacity Quick and simple setting operation Short setting and removing operation Good loads in green concrete Bridging of gaps mm M6 M mm M8 M mm M8 M mm M8 M16 6,5 20 mm M5 M /
3 Anchor type Base Approval Application Cracked concrete Uncracked concrete Lightweight concrete Aerated concrete Solid brick masonry Medium and light duty anchors HAM hard sleeve anchor Secure fastenings in various base s Hollow brick masonry European Technical Approval Seismic approval Fatigue approval or test report Shock approval Fire tested HUS-HR screw anchor, stainless steel Fastening channels, brackets, racks, seating HUS screw anchor, carbon steel Fastening channels, brackets, racks, seating HUS- 6 screw anchor, redundant fastening Fastening channels, brackets, racks, seating HUS 6 / HUS-S 6 screw anchor HKD push-in anchor Fastening light channels, brackets, interior panelling or cladding Fastening with threaded rods for pipe suspensions, air ducts, suspended ceilings HKV push-in anchor Fastening with threaded rods for pipe suspensions, air ducts, suspended ceilings HUD-1 universal anchor Various applications HUD-L universal anchor Various applications = very suitable = may be suitable per application = technical report redundant fastening / 2012
4 Advantages Drill bit diameter resp. anchor size Steel, galvanised. Specification Setting Page Stainless steel A2 (1.4303) Stainless steel A4 (1.440 HCR steel (1.4529) External thread Internal thread Pre-setting Through-fastening Wings to prevent spinning in the bore hole Plastic cap in cone to prevent dust entrance Screw driven straight into base Forged on washer Matched system of screw anchor and screw driver Screw driven straight into base Forged on washer Matched system of screw anchor and screw driver Screw driven straight into base Forged on washer Matched system of screw anchor and screw driver mm Thread: M6 M mm 8 14 mm 6 mm Screw driven straight into base Small drill bit diameter Matched system of screw anchor and screw driver Visual verification of full expansion Small setting depth Visual verification of full expansion Small setting depth Fast setting Flexibility of screw length An anchor for every base Fast setting Flexibility of screw length An anchor for every base 6 mm 8 25 mm M6 M mm M6 M mm 6 10 mm /
5 Anchor type Base Approvals Application Cracked concrete Uncracked concrete Lightweight concrete Aerated concrete Solid brick masonry Medium and light duty anchors HLD light duty anchor Fastenings to weak with cavities Hollow brick masonry European Technical Approval Seismic approval Fatigue approval or test report Shock approval Fire tested HRD-U/-S frame anchor HRD frame anchor Securing support frames, timber frames, fascade panels, curtain walling On most hollow and solid base HPS-1 impact anchor Fastening wood battens, components for electrical and plumbing installations HHD-S cavity anchor Fastening battens, channels panels HCA coil anchor Temporary external fastenings HSP/HFPdrywall plug Fastenings in dry walls HA8 ring/ hook anchor For suspended ceilings and other items from concrete ceilings DBZ wedge anchor Suspension from concrete ceilings e.g. using steel straps, punched band, Nonius system hanger HT metal frame anchor Fastening door and window frames = very suitable = may be suitable per application = technical report redundant fastening / 2012
6 Advantages Drill bit diameter resp. anchor size Steel, galvanised. Specification Setting Page Stainless steel A2 (1.4303) Stainless steel A4 (1.440 HCR steel (1.4529) External thread Internal thread Pre-setting Through-fastening Flexibility of screw length Resilient toggling action to suit every base 10 mm 264 Preassembled with screw Screw of steel strength 5.8 or stainless steel A4 (1.440 impact and temperature resistant high quality plastic 10 and 14 mm 8 10 mm impact and temperature resistant high quality plastic 4 8 mm 292 Controlled setting Deliverable with or without prefitted screw Re-usable Removable 8 12 mm 16 mm Self-drilling tip One bit for anchor and screw Removable Quick and easy setting Automatic follow up expansion 8 mm 302 Small drill bit diameter Quick setting by impact extension Automatic follow up expansion No risk of distortion or forces of constraint Expansion cone can not be lost 6 mm 8 10 mm /
7 Anchor type Base Approvals Application Medium and light duty anchors HK ceiling anchor Cracked concrete Uncracked concrete Lightweight concrete Aerated concrete Solid brick masonry Hollow brick masonry European Technical Approval Seismic approval Fatigue approval or test report Shock approval Fastening of suspended ceilings, cable trays, pipes Fire tested HPD aerated concrete anchor Various fastenings HKH hollow deck anchor Suspension from prestressed concrete hollow decks HTB Ingenious and strong for hollow base s Insulation fasteners IDP insulation fastener Fastening of hard, self supporting insulating s IZ expandable insulation fastener Fastening of soft and hard, self supporting insulating s IDMS / IDMR insulation fastener Fastening of soft and hard, self supporting insulating s and non self supporting insulation s = very suitable = may be suitable per application = technical report redundant fastening / 2012
8 Advantages Drill bit diameter resp. anchor size Steel, galvanised. Specification Setting Page Stainless steel A2 (1.4303) Stainless steel A4 (1.440 HCR steel (1.4529) External thread Internal thread Pre-setting Through-fastening Small bore hole Quick and easy setting Approved (DIBt) Fire resistance Immediately loadable Approval for single point fastenings Approved for sprinkler systems Load carried by strong metal channel and screw Convincing simplicity when setting 6 mm M6 Without predrilling Thread: M6 M mm Thread: M6 M mm One piece element Corrosion resistant No heat bridge Corrosion resistant No heat bridge Reliable bonding of plaster 8 mm insulating thickness mm 8 mm insulating thickness up to 180mm One piece element Corrosion resistant Fire resistant 8 mm insulating thickness up to 150mm /
9 Anchor type Base Approvals Application Adhesive anchor systems Cracked concrete Uncracked concrete Lightweight concrete Aerated concrete Solid brick masonry Hollow brick masonry European Technical Approval Seismic approval Fatigue approval or test report Shock approval Fire tested Foil capsule systems HVZ adhesive anchor HVU adhesive anchor Heavy-duty fastenings with small spacing and edge distances Heavy duty fastenings with small spacing and edge distances Injection mortar systems HIT-RE 500 SD Adhesive anchor in cracked concrete HIT-RE 500 Adhesive anchor HIT-HY 200 Adhesive anchor in cracked concrete = very suitable = may be suitable per application = technical report redundant fastening / 2012
10 Advantages Drill bit diameter resp. anchor size Steel, galvanised. Specification Setting Page Stainless steel A2 (1.4303) Stainless steel A4 (1.440 HCR steel (1.4529) External thread Internal thread Pre-setting Through-fastening Small edge distances and spacing A strong and flexible foil capsule Small edge distances and spacing A strong and flexible foil capsule M10 M HAS M8 M mm 360 Long working time HIT-V M8 M mm 380 Long working time HIT-V M8 M mm 422 Flexibility in terms of working time No styrene content No plasticizer content Environmental protection due to the minimized packaging HIT-V M8 M mm /
11 Anchor type Base Approvals Application Cracked concrete Uncracked concrete Lightweight concrete Aerated concrete Solid brick masonry Hollow brick masonry European Technical Approval Seismic approval Fatigue approval or test report Shock approval Fire tested Injection mortar systems HIT-HY 150 MAX Adhesive anchor in cracked concrete HIT-CT 1 Hilti Clean technology adhesive anchor HIT-HY 150 Adhesive anchor HIT ICE Adhesive anchor for low installation temperatures HIT-HY 70 Universal mortar for solid and hollow brick = very suitable = may be suitable per application = technical report redundant fastening / 2012
12 Advantages Drill bit diameter resp. anchor size Steel, galvanised. Specification Setting Page Stainless steel A2 (1.4303) Stainless steel A4 (1.440 HCR steel (1.4529) External thread Internal thread Pre-setting Through-fastening No styrene content No plasticizer content Environmental protection due to the minimized packaging HIT-V M8 M mm 558 Environmentaly and user friendly: clean of critical hazardous substances HIT-V M8 M No styrene content No plasticizer content Environmental protection due to the minimized packaging HIT-V M8 M mm 630 HAS M8 M mm 672 mortar filling control with HIT-SC sleeves mm Thread: M6 M /
Anchor Fastening Technology Manual 09 / 2012
Anchor Fastening Technology Manual 09 / 2012 0 Forword Foreword Dear customer, As it is our ambition to be the worldwide leader in fastening technology, we are continously striving to provide you with
More informationAnchor Fastening Technology Manual 09 / 2012
Anchor Fastening Technology Manual 09 / 2012 0 Forword Foreword Dear customer, As it is our ambition to be the worldwide leader in fastening technology, we are continously striving to provide you with
More informationAnchor Fastening Technology Manual 09 / 2012
Anchor Fastening Technology Manual 09 / 2012 0 Forword Foreword Dear customer, As it is our ambition to be the worldwide leader in fastening technology, we are continously striving to provide you with
More informationAnchor Fastening Technology Manual 09 / 2012
Anchor Fastening Technology Manual 09 / 2012 0 10 / 2012 Forword Foreword Dear customer, As it is our ambition to be the worldwide leader in fastening technology, we are continously striving to provide
More informationAnchor Fastening Technology Manual 09 / 2012
Anchor Fastening Technology Manual 09 / 2012 0 Forword Foreword Dear customer, As it is our ambition to be the worldwide leader in fastening technology, we are continously striving to provide you with
More informationAnchor Fastening Technology Manual 09 / 2012
Anchor Fastening Technology Manual 09 / 2012 0 Forword Foreword Dear customer, As it is our ambition to be the worldwide leader in fastening technology, we are continously striving to provide you with
More informationAnchor Fastening Technology Manual 09 / 2012
Anchor Fastening Technology Manual 09 / 2012 0 Forword Foreword Dear customer, As it is our ambition to be the worldwide leader in fastening technology, we are continously striving to provide you with
More informationADVANCED ANCHOR SOLUTIONS BUILT TO CODE.
Hilti Anchoring Solutions + NCC Compliance ADVANCED ANCHOR SOLUTIONS BUILT TO CODE. Hilti. Outperform. Outlast. Hilti HIT- Hilti HIT- ANCHOR PORTFOLIO UPDATE INSIDE Hilti Anchoring Solutions + NCC Compliance
More informationUniversal frame fixing SXR-T
The all-round solution with short drill hole depth. VERSIONS APPROVALS zinc-plated steel stainless steel BUILDING MATERIALS Approved for: Concrete C12/15 Vertically perforated brick Hollow blocks made
More informationScrew- [mm] max. recommended load. max. recommended load , ,
Multi-purpose plugs Suitable for anchorages in concrete, plaster, gas concrete, solid brick, lime sand brick, ventilated brick, plaster board, etc. Ideal for bolt screws, shoulder screws and other wood
More informationSECTION ANCHOR SYSTEMS
SECTION 05 05 00 ANCHOR SYSTEMS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Anchor bolts. B. Requirement: 1. Furnish all materials, labor and equipment required to provide anchor systems not specifically
More informationFrame fixing SXS-F US
The high-performance frame fixing with SX-technology VERSIONS APPROVALS zinc-plated steel stainless steel BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60 Three-layer composite exterior wall
More informationThe high-performance frame fixing with SX-technology VERSIONS. zinc-plated steel stainless steel BUILDING MATERIALS
-T The high-performance frame fixing with SX-technology VERSIONS APPROVALS zinc-plated steel stainless steel BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60 Three-layer composite exterior wall
More informationfischer fixing compass Cracked concrete.
fischer fixing compass Cracked concrete. Fixing solutions for a strong hold in cracked concrete. Highbond system FHB II Our strongest solution for cracked concrete. Relative tension load level: 100 % fischer
More informationZinc-plated steel Stainless steel Hot-dip galvanised steel BUILDING MATERIALS
The all-round solution with short drill hole ADVANTAGES The special functioning allows for use in solid and hollow building materials with an anchorage of just 0 mm, ensuring an economical fixing. The
More informationINDEX. 1. DuoTec. Product Information. 2. Market Offering. 3. DuoTec Advantages. 4. Product Range & Packaging. 5. Technical Data
INDEX 1. DuoTec. Product Information 2. Market Offering 3. DuoTec Advantages 4. Product Range & Packaging 5. Technical Data 1. Product Information The innovate toggle bolt for heavy loads in all types
More informationgreenline fischer greenline
greenline fischer greenline The first range of fixing products with renewable resources. greenline The fixing assortment made with sustainable natural sources. Sustainable building With the introduction
More informationSECTION VIBRATION CONTROLS FOR PLUMBING PIPING AND EQUIPMENT
Page 220548-1 SECTION 220548 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationfischer Test Report Fixing Tests for Multi-Core block
fischer Test Report Fixing Tests for Multi-Core block Testing on Topcrete Multicore Block 1.Contents 2.Test Parameters 3. Fixing products tested 3.1 FIS 3.5V 360 S Injection Resin and FIS 18X85 N with
More informationHilti HIT-HY 200-R 500 ml foil pack (also available as 330 ml foil pack) Static mixer
with HIT-V Hilti HIT-HY 200 with HIT-V Injection Mortar System Benefits Hilti HIT-HY 200-R 500 ml foil pack (also available as 330 ml foil pack) Static mixer HIT-V rods HIT-V (Zinc) HIT-V-F (Gal) HIT-V-R
More informationHKD redundant FLUSH ANCHOR. Technical Datasheet Update: Mar-18
HKD redundant FLUSH ANCHOR Technical Datasheet Update: Mar-18 HKD Flush anchor Everyday standard manual set flush anchor for redundant fastening applications Anchor version HKD (M6-M16) HKD-woL (M6-M16)
More informationHKD Push-in anchor, Single anchor application
Push-in anchor, Anchor version Carbon steel with lip -S(R) Carbon steel, stainless steel with lip -E(R) Carbon steel, stainless steel without lip Benefits - simple and well proven - approved, tested and
More informationHilti HIT-HY 170 mortar with HIT-V rod. Anchor Fastening Technology Manual. Hilti HIT-HY 170 with HIT-V HIS-(R)N 03 / /
Anchor Fastening Technology Manual Hilti HIT-HY 170 with HIT-V HIS-(R)N 1 Hilti HIT-HY 170 with HIT-V Injection mortar system Benefits Hilti HIT-HY 170 500 ml foil pack (also available as 330 ml foil pack)
More informationfischer fixing compass Solid and hollow brick masonry.
fischer fixing compass Solid and hollow brick masonry. Our fixing specialists for solid and hollow brick masonry. Injection system FIS V The strongest and most flexible solution in masonry. Maximum load-bearing
More informationHIT HY 200 Implementation Into PROFIS Anchor
HIT HY 200 Implementation Into PROFIS Anchor This document provides a brief overview of some key HIT-HY 200 features, and how these features are implemented into PROFIS Anchor. The HIT-HY 200 chemical
More informationANCHORS Mechanical & Chemical Anchoring
ANCHORS Mechanical & Chemical Anchoring Click to start MASONRY & PLASTERBOARD ANCHORS MASONRY ANCHORS CAVITY WALL ANCHORS CHEMICAL ANCHORS PA TOOLS & ACCESSORIES MASONRY ANCHORS Ramset has been offering
More informationTP EA. Product Description. Properties and Benefits. Applications. Reaction Resin Mortar Based on Epoxy Acrylate. Approvals / Certificates:
Approvals / Certificates: Product Description The TP EA is a 2-component reaction resin mortar based on an epoxy acrylate. This product may be used in combination of a hand-, battery- or pneumatic tool
More informationSECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]
More informationSPECIFICATION & DESIGN MANUAL " AISI 1060 to 1065 Rockwell Hardness 51 to 55 Perma-Seal coated Stick-E Pin 3/4" (Step Shank) 1"
Trak-It /Stick-E TM SPECIFICATION & DESIGN MANUAL TM Stick-E Electrical and Mechanical Fastening System PRODUCT DESCRIPTION The Stick-E fastening system uses Trak-It gas technology with specially designed
More informationSECTION MISCELLANEOUS METAL FABRICATIONS
SECTION 05500 PART I - GENERAL 1.01 DESCRIPTION: A. Scope: Work under this Section shall include all material and installation necessary to provide Miscellaneous Metal Fabrications, as shown and detailed
More informationProduct Range. with Technical Data.
Product Range 2013 with Technical Data www.mkt.de All technical details may be subject to change without notice. We do not accept liability for printing mistakes or omissions. For the latest technical
More informationHVU with HAS/HAS-E rod adhesive anchor system
HVU with HAS/HAS-E rod HVU with HAS/HAS-E rod Mortar system Benefits Hilti HVU foil capsule HAS HAS-R HAS-HCR rod - suitable for non-cracked concrete C 20/25 to C 50/60 - high loading capacity - suitable
More informationInjection System VMZ. Injection System for cracked and non-cracked concrete. Conical Stud VMZ-A. Cartridge VMZ 150
Injection System for cracked and non Injection System Conical Stud A Cartridge Coaxial Cartridge for silicone guns Content: ml Cartridge 2 Coaxial Cartridge for silicone guns Content: 2ml, incl. 2 Static
More informationInjection System VMU plus
Injection System VMU plus Threaded Stud VMU-A for concrete and brickwork Threaded Stud VM-A 1 meter length, to be cut to the required length for concrete and brickwork Internally Threaded Sleeve VMU-IG
More informationSECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
Page 230548-1 SECTION 230548 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationfischer Test Report Fixing Tests for
fischer Test Report Fixing Tests for CONTENTS 1. Test Parameters 2. Fixings Products Tested 2.1 fischer Nylon SX Plug 2.2 fischer Nylon M Unit 2.3 fischer FFS Frame Fixing Screw 2.4 fischer FIS V 360 S
More informationAdvancements in Adhesive Anchor Technology
One giant leap for your next project. 1 What are the typical applications you design using post-installed anchors? 2 Post-installed anchors cover a complete range of fastening applications Structural anchor
More informationModern Construction Materials Prof. Ravindra Gettu Department of Civil Engineering Indian Institute of Technology Madras
Modern Construction Materials Prof. Ravindra Gettu Department of Civil Engineering Indian Institute of Technology Madras Lecture 42 Anchors - Guest Lecture (Refer Slide Time: 00:10) Good Afternoon ladies
More informationDUOline. The innovative product line with. More functions More performance More security NEW. fischer DUO - Line. More power, more intelligence
DUOline The innovative product line with More functions More performance More security fischer DUO - Line More power, more intelligence NEW DUO-Line Intelligent combinations for more power and intelligence.
More informationHFX Adhesive Anchor Adhesive Anchoring Systems
HFX Adhesive Adhesive ing Systems MD300 Dispenser HFX-M Mixer HFX Cartridge Standard Silicon Dispenser Product Description Hilti HFX is a new hybrid adhesive mortar combining resin, hardener, cement and
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16. Please refer the publication in its entirety for complete details on this product
More informationR-CAS-V Spin-In Capsule with Threaded Rods
R-CAS-V Spin-In Capsule with Threaded Rods High-performance, quick-setting, styrene-free vinylester resin for concrete Approvals and Reports ETA-10-0108 Product information Features and benefits Approved
More informationMKT Fixing. JAM The Professional Standard. Quality Management. Environmental Management. Energy Management
MKT Fixing QHSAS 18001 Quality Management Environmental Management Energy Management Occupational Health and Safety Management System 36 Fire Resistance Fire Resistant Anchor Systems Tested according to
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 0548 - PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationNortrax Section David Manchester Road, Ottawa NON-STRUCTURAL METAL FRAMING 16 May 2014 Page 1
16 May 2014 Page 1 PART 1 GENERAL 1.1 DESCRIPTION This section specifies steel studs wall systems, shaft wall systems, ceiling or soffit suspended or furred framing, wall furring, fasteners, and accessories
More informationHKD Push-in anchor, Single anchor application
HKD Push-in anchor, Anchor version HKD Carbon steel with lip HKD-S(R) Carbon steel, stainless steel with lip (R) Carbon steel, stainless steel without lip Benefits - simple and well proven - approved,
More informationfischer Test Report Fixing Tests for Bison Hollow Core Slabs
fischer Test Report Fixing Tests for Bison Hollow Core Slabs Testing on Bison Hollow Core Slabs 1. Introduction Contents Test Parameters Bison Hollow Core Slab Information 2. Fixings Products Tested FISV
More informationStudent Services & Classroom Addition SECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 48 - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Isolation pads. 2. Spring isolators. 3. Restrained spring isolators. 4. Channel
More informationhors Anc Eaton's B-Line series fasteners 183
183 Glossary Prefix - Description Screw Dia. Length Suffix ACB - Concrete Anchor Bolt 4 - #4 75-3 /4" AN - Acorn Nut ACPD - Bang-IT 6 - #6 81-13 /16" CH - Combo Head ACPW - Wood-Knocker 8 - #8 87-7 /8"
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 260548 - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Isolation pads. 2. Spring isolators. 3. Restrained spring isolators. 4. Channel
More informationDX - Application Manual
Sr. No. Application Base Material Benefits Fastener 1 Concrete Fast operation X-DNI Fixing of dry wall tracks 2 Concrete Fast operation X-DNI Fixing of junction box, conduits 3 Fast operation Marking characters
More informationCode Compliance Research Report CCRR-0118
Code Compliance Research Report CCRR-0118 Issue Date: 12-15-2009 Revision Date: 04-30-2018 Renewal Date: 04-15-2019 DIVISION: 06 00 00 WOOD, PLASTIC, AND COMPOSITES Section: 06 63 00 - Plastic Railings
More informationHilti HIT-CT 1 with HIT-V
Hilti HIT-CT 1 Injection mortar system Benefits - Hilti Clean technology (clean- Tec) Hilti HIT-CT 1 330 ml foil pack (also available as 500 ml foil pack) Static mixer HIT-V(-F) rods rods rods - Environmentaly
More informationEJOT Chemical Anchoring Systems. High strength anchoring of threaded resin studs into masonry blocks, cracked and non-cracked concrete
EJOT Chemical Anchoring Systems High strength anchoring of threaded resin studs into masonry blocks, cracked and non-cracked concrete The Quality Connection www.ejot.co.uk EJOT Multifix VSF EJOT Multifix
More informationHKD Push-in anchor, Single anchor application
HKD Push-in anchor, Anchor version HKD Carbon steel with lip HKD-S(R) Carbon steel, stainless steel with lip (R) Carbon steel, stainless steel without lip Benefits - simple and well proven - approved,
More informationSECTION 11 Architectural and Nonstructural Elements Field Investigation
SECTION 11 Architectural and Nonstructural Elements Field Investigation Types of Data to Be Collected and Recorded Research in these fields should be directed at determining the effect that architecture
More informationInsulation Fastener Guide IKO Ener-Air & IKO Enerfoil Wall Insulation
Insulation Fastener Guide IKO Ener-Air & IKO Enerfoil Design Considerations The type and frequency of a fastener system is typically decided by a structural engineer or in collaboration with a design professional.
More informationHVZ (HVU-TZ+HAS-TZ) adhesive anchor system Anchor design (ETAG 001) / Rods&Sleeves / Concrete
HVZ (HVU-TZ+) adhesive anchor system Anchor design (ETAG 001) / Rods&Sleeves / Concrete Anchor version HVZ Mortar capsule Anchor rod: HAS-R-TZ HAS-HCR-TZ (M10-M20) Benefits - Suitable for cracked and noncracked
More informationINGLEBEAMS. Our Inglebeam range is available in either solid aggregate versions or hollow light weight version.
INGLEBEAMS Important Note: Our Inglebeam range is available in either solid aggregate versions or hollow light weight version. Ensure you select the correct fitting guidelines for the model being installed.
More informationReference: RAC-en Date: 24/01/18 Revision: 5 Page: 1 of 8 PRODUCT FEATURES BENEFITS BASE MATERIALS ASSESSMENTS
Reference: RAC-en Date: 24/01/18 Revision: 5 Page: 1 of 8 MTP MTP-X MTP-G Torque controlled expansion. Solid impact section Embedment depth mark. Three way expansion clip. Variety of lengths Previous installation,
More informationBRANZ FACTS RESILIENT NON-STRUCTURAL ELEMENTS SEISMICALLY RESILIENT NON-STRUCTURAL ELEMENTS # 3. Restraint systems
SEISMICALLY BRANZ FACTS RESILIENT NON-STRUCTURAL ELEMENTS SEISMICALLY RESILIENT DESIGN CRITERIA # 2 NON-STRUCTURAL ELEMENTS # 3 Restraint systems The next step in the non-specific design pathway in NZS
More informationINGLEBEAMS. Our Inglebeam range is available in either solid aggregate versions or hollow light weight version.
INGLEBEAMS Important Note: Our Inglebeam range is available in either solid aggregate versions or hollow light weight version. Ensure you select the correct fitting guidelines for the model being installed.
More informationHDA-P HDA-PR HDA-PF Anchor for presetting. HDA-T HDA-TR HDA-TF Anchor for through-fasting. Nuclear power plant approval
HDA Design anchor Anchor version HDA-P HDA-PR HDA-PF Anchor for presetting HDA-T HDA-TR HDA-TF Anchor for through-fasting Benefits - suitable for non-cracked and cracked concrete C 20/25 to C 50/60 - mechanical
More informationIndex. Clawbolt Anchor Tygabolt Anchor. Xbolt Anchor. Dropin Anchor & Tool. Nail-in Anchor Suspension Anchor
Index Clawbolt Anchor Tygabolt Anchor Xbolt Anchor Dropin Anchor & Tool Nail-in Anchor Suspension Anchor Pantha Plug PVC Wall Plug Wedge Anchor B Wedge Anchor BZ Plus Wedge Anchor BZ-IG & Setting Tool
More informationFEATURES APPLICATIONS. Technical data sheet SSW - STEEL STRONG-WALL FOR TIMBER FRAME RACKING RESISTANCE.
The Steel Strong-Wall is a corrugated steel panel which is designed to be fixed directly to the concrete foundations of a building, within the external or internal wall, via a bolted connection. FEATURES
More informationHRD-U 10 / - S 10 / -U 14 Frame anchor
HRD-U 10 / - S 10 / -U 14 Anchor version HRD-U 10 Carbon steel Stainless steel HRD-S 10 Carbon steel Stainless steel Benefits - universal frame anchor for façade, steelwork, and mechanical installation
More information1. Hangers and supports for electrical equipment and systems.
PART 1 - GENERAL... 1 1.1 RELATED DOCUMENTS... 1 1.2 SUMMARY... 1 1.3 DEFINITIONS... 1 1.4 PERFORMANCE REQUIREMENTS... 1 1.5 SUBMITTALS... 2 1.6 QUALITY ASSURANCE... 2 1.7 COORDINATION... 2 PART 2 - PRODUCTS...
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this Section. 1.2 SUMMARY A. This Section includes the
More informationfischer Test Report Fixing Tests for
fischer Test Report Fixing Tests for Testing into Forticrete Hi-Light Block 1 Introduction 1.1 Contents 1.2 Test Parameters 2 Fixing Products tested. 2.1 fischer FIS V360 S Injection Resin 2.2 fischer
More informationHilti HIT-CT 1 post installed rebars
Hilti HIT-CT 1 post installed rebars Injection mortar system Benefits Hilti HIT-CT 1 330 ml foil pack (also available as 500 ml foil pack) Statik mixer Rebar - Hilti Clean technology (Clean-Tec) - Environmentaly
More informationSormat ITH-Pe PRODUCT DATA SHEET. ITH-Pe - POLYESTER BASED RESIN STYRENE FREE. Polyester based injection resin, styrene free. ITH 165 Pe art.
ITH 165 Pe art. 72900 Application in noncracked concrete ITH 300 Pe art. 72940 ITH 410 Pe art. 72941 Content Page Product description 2 Properties and benefits 2 Sample applications 2 Applications and
More informationHLC. Hex head nut with pressed-on washer HLC-H. Bolt version with washer HLC-L. Torx round head HLC-SK. Torx Counter sunk head HLC-EC
HLC Anchor version Hex head nut with pressed-on washer Benefits HLC offers various head shapes and fastening thicknesses. HLC-H Bolt version with washer HLC-L Torx round head HLC-SK HLC-EC HLC-EO HLC-T
More information1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases.
SECTION 260529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases. 1.2
More informationFig Beam Clamp Retaining Strap (B-Line B3367)
Fig. 69 - Beam Clamp Retaining Strap (B-Line B3367) Size Range: 3 /8"-16 thru 3 /4"-10 rod 4 (101.6mm) thru 16 (406.4mm) lengths Note: longer lengths are available consult factory Material: Pre-Galvanized
More informationReal Stone Cladding. stone cladding system
Stone Cladding System Catalogue 2015 1 STONE CLADDING SYSTEM Rustic yet elegant natural stone facade suitable for exterior and interior use, at a fraction of cost of traditional walling Easy to install,
More informationR-CAS-V Spin-In Capsule with Threaded Rods
R-CAS-V Spin-In Capsule with Threaded Rods High-performance, quick-setting, styrene-free vinylester resin for concrete Approvals and Reports ETA-10-0108 Product information Features and benefits Approved
More informationTechnical data No. 17/0001 of 25/04/2017
Hilti Corporation Feldkircherstrasse 100 FL-9494 Schaan Principality of Liechtenstein www.hilti.group Technical data No. 17/0001 of 25/04/2017 General Part Trade name Injection system Hilti HIT-RE 500
More informationUniversal plug UX. Type of installation Pre-positioned and push-through installation.
Ecoterre Earth Brick Recommended Fixings Table SUITABLE APPLICATIONS Examples of Suitable Applications *SWL recommendeafe working load in tension Recommended fi scher products *SWL (Kg) Dry Wall / stud
More informationFASTENERS FOR EVERY TASK
CHEMICAL ANCHORS FASTENERS FOR EVERY TASK OVERVIEW DRYWALL, SHEET materials & HOLLOW WALL FASTENERS ZIP-IT Gypsum board anchor Zip-TOGGLE with screws LEGS wall anchor ST Strap Toggle ST Spring Toggle HWA
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
More informationLEGACY REPORT ER-5608* Reissued February 1, Legacy report on the 1997 Uniform Building Code
LEGACY REPORT ER-5608* Reissued February 1, 2004 www.icc-es.org Business/Regional Office 5360 Workman Mill Road, Whittier, California 90601 (562) 699-0543 Regional Office 900 Montclair Road, Suite A, Birmingham,
More informationTITEN HD Heavy Duty Screw Anchor for Concrete & Masonry
TITEN HD Heavy Duty Screw Anchor for & Masonry The Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes
More informationSECTION NON-STRUCTURAL METAL FRAMING
SECTION 09 22 16 PART 1 - GENERAL 1.1 DESCRIPTION A. This section specifies steel studs wall systems, shaft wall systems, ceiling or soffit suspended or furred framing, wall furring, fasteners, and accessories
More informationTechnical Data Sheet. Hilti Firestop cable collar CFS-CC. European technical approval ETA N o 13 / Issue 10 / 2013
Technical Data Sheet Hilti Firestop cable collar CFS-CC Hilti Firestop cable collar CFS-CC European technical approval ETA N o 13 / 0704 Issue 10 / 2013 Hilti Firestop cable collar CFS-CC Issue 10 / 2013
More information8.8 M10/15x90 50Nm. Zinc plated. Mechanically galvanised. PSA anchor. heavy duty vibration resistant removable
Zinc plated 8.8 M10/15x90 50Nm Mechanically galvanised PSA anchor heavy duty vibration resistant removable Edition: April 2011 1 Powers offers the widest range of mechanical and adhesive fasteners in the
More informationCTP STITCH-TIE AGAIN! Quick and easy way to re-anchor existing veneers to back-up structures.
Helical Wall Tie System for Stabilizing Veneers and Structural Repair AGAIN! ANOTHER CTP SOLUTION! CTP STITCH-TIE Quick and easy way to re-anchor existing veneers to back-up structures. Brick to Concrete
More informationINGLEBEAMS. Our Inglebeam range is available in either solid aggregate versions or hollow light weight version.
INGLEBEAMS Important Note: Our Inglebeam range is available in either solid aggregate versions or hollow light weight version. Ensure you select the correct fitting guidelines for the model being installed.
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSEISMIC RESTRAINT SYSTEM
1. GENERAL 1.1. Description: SECTION 16012 SEISMIC RESTRAINT SYSTEM 1.1.1. This specification covers design and installation of seismic bracing and anchorage required for conduit, cable tray, bus duct,
More informationHUS3-H 8 / 10 / 14 Carbon steel concrete screw with hexagonal head. HUS3-C 8 / 10 Carbon steel concrete screw with countersunk head
HUS3 Screw anchor Anchor version HUS3-H 8 / 10 / 14 Carbon steel concrete screw with hexagonal head HUS3-C 8 / 10 Carbon steel concrete screw with countersunk head HUS3-HF 10 / 14 Carbon steel concrete
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 092216 - NON-STRUCTURAL METAL FRAMING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS 75024
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 587 (52) 99 0543 www.icc es.org ESR 393 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 04 00 00 MASONRY
More informationAdjustable Suspension Hanger Technical Datasheet
Adjustable Suspension Hanger sheet The Adjustable Suspension Hangers Clip are a component of the Keylock Ceiling System. The upper vertical side of the hanger allows the Suspension Rod that goes through
More informationApprovals / Certificates:
Approvals / Certificates: Product Description The TP E SD mortar is a 2-component reaction resin mortar based on a pure epoxy and will be delivered in an exclusive 2-C cartridge system. This high performance
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: HILTI, INC SOUTH 122 ND EAST AVENUE TULSA, OKLAHOMA 74146
0 ICC ES Report ICC ES (800) 42 87 (2) 99 04 www.icc es.org 000 Most Widely Accepted and Trusted ESR 282 Valid: 08/4 to 08/ DIVISION: 04 00 00 MASONRY SECTION: 04 0 9. MASONRY ANCHORS REPORT HOLDER: HILTI,
More informationSeismic Restraints. Cent-R-Rail Supplement* SYSTEMS THAT MAKE SENSE
SRSCR-0 Seismic Restraints Cent-R-Rail Supplement* Multi-Directional Bracing For Data-Track, Half-Rack and Multi-Tier Half-Rack Systems Structural Engineer S 9 *To be used in conjunction with Cooper B-Line
More informationHilti HIT-HY 200 A (R) mortar with HIT-V rods
Hilti HIT-HY 200 A (R) mortar with HIT-V rods Injection mortar system Hilti HIT- HY 200-A 500 ml foil pack (also available as 330 ml foil pack) Hilti HIT- HY 200-R 500 ml foil pack (also available as 330
More informationGeneral Construction Supervisory Authority Approval
General Construction Supervisory Authority Approval (Translation of the German original text which has not been checked by the DIBt.) Approval no.: Z-21.8-2018 Period of validity: April 1, 2014 until:
More informationATI Evaluation Service A Division of Architectural Testing Certification Services PCA-125
ATI Evaluation Service A Division of Architectural Testing Certification Services PCA-125 Subject to Renewal: 04/15/2017 Issued: 05/06/2016 Visit www.ati-es.com for current status Page 1 of 14 TAMKO Building
More informationDUOline. The innovative product line with. More functions More performance More security. fischer DUO - Line NEW. More power, more intelligence
DUOline The innovative product line with More functions More performance More security fischer DUO - Line More power, more intelligence NEW DUO-Line Intelligent combinations for more power and intelligence.
More information