PUNCH RANGE hydraulic punching machines

Transcription

1 PUNCH RANGE hydraulic punching machines

2 punch station-applications punch - double punch The Kingsland range of Hydraulic Punching machines all maximum capacity. The punching machines are available from 60 ton to 175 ton, both in single-ended as come equipped with a deep throat of 25 as standard. Heavy-duty support tables with scales and backstops, well as double-ended execution! Further-more, tooling universal die holder for punching in plate, flat bar, from competitors machines and/or other brand-names angle iron and flange of channel and beam are all part can be used without special machine-modifications. of the standard execution. The Kingsland Hydraulic The standard machine comes equipped with a deep Punching machines are also available in double-ended throat (single-ended version) and universal die-bolster, execution, using a shared frame and thus saving space punching up to 2 1 /4 diameter/slot. The front part of and money. A second machine is no longer needed the table can be removed in order to punch in large for doubling the capacity and productivity. Both ends format angle-iron. of the machine can be used at the same time up to minimum deform stripper assembly Minimum deform stripper assembly to give minimum deformation while punching close pitch holes in flat bar. quick tool change Quick change punch holder. Only needs to turn the punch holder by 90 to lock in position. large hole attachment Large hole/slot attachment for diameters from 1 1 /2 up to 4 3 /8. Also available for diameters up to 6 3 /8 or 9. channel/beam web bolster Specially designed web bolster for punching in the web of channel or beam. Bolsters for special profiles available on application. louvre punch unit Special punch unit for punching ventilation applications. tube notch unit For 90-degree connection with tubes. Available for outside diameters up to 6 1 /2.

3 punch station-applications technology sheet bending unit Sheet bending unit with multi-vee block (with 3 /8, 3 /4, 5 /16 and 1 1 /2 wide V-openings, all 85 ). large corner notch attachment bar bending unit For bending material up to max. 7 /8 thickness. With single-vee block, 3 with V at axis CNC-controlled positioning table Punching of plates, flat steel, in the web of channel and on the flange of channel and I-beams. The punching of the web in channel is effected with the flanges up and by using extended length punches. The table is delivered complete with servo-motor and 2 axis measuring system, and is equipped with an easy to operate Robosoft M200 (or optional M 600) control. Especially advantageous is the repeatability accuracy when manufacturing repeat batches. The use of labour intensive manual layout is no longer required and possible operator error is eliminated. The workpiece is pushed to the CNC controlled stop, after punching the stop goes to the next position The CNC Controlled Positioning Table can be fitted to all Kingsland Steelworkers and Punching machines with 25 deep throat. Working area: lateral stop (X-axis): 39 1 /2 bit stop (Y-axis): 20 positioning accuracy: ±0,004 twin hole unit Twin hole variable pitch unit. Punches 2 holes up to 1 1 /8 dia. swan neck bolster For web and flange punching up to 1 1 /4 dia. in 12 max. channel and I beam. dovetail assembly Changing from punching to bending in 20 seconds. punch holder, minimum deform stripper, bolster multi-vee bending tool The M 200 Controller has been developed to execute punching jobs in a fast and repeatable way with high accuracy. With the M 200 Controller it is possible to make 8 different punching programs, each with a maximum of 100 steps (holes). The holes need to be programmed with their respective X and Y axis co-ordinates. Furthermore, the co-ordinates can be programmed using their absolute or relative positions. Repetition of incremental steps is also possible. The controller can be used in both auto-matic or manual mode. The M 600 Controller with a 9 LCD screen, using standard ISO codes, it is possible to carry out linear, square, rectangular, circular and circle arts of any size of opening requested in the punching process. The workpiece with its programmed hole pattern is graphically simulated on the screen. The CNC control ensures the required accuracy within a hole pattern using several gauge lines. Each program with its graphic simulation can be stored on disk (disk memory 720 kb, 3.5 disk drive). linear rails CNC-Controlled Linear Rail model KA The Kingsland linear rail is commonly used in the manufacture of long, multi-holed items. The length of the rail (beam) is supplied to suit the users application, starting at 3 feet and rising in 39 lengths. It will manually (model KM) or automatically (model KA) feed lengths of material such as flat bar, angle or channel sections into the machine for punching or cropping without the need for marking out, thus increasing production speeds significantly and eliminating costly operator error.

4 model specifications Information not binding to detail as design and specifications are constantly being reviewed. All dimensions are shown in inches unless otherwise stated. based on material strength of 28 ton/inch 2 PUNCHING 60 P 70 P 80 P 95 P 125 P 175 P maximum capacity /4 x 1 / x 3 / /8 x 3 / /16 x /8 x /2 x 1 1 /4 diameter x thickness /4 x 5 / /4 x 11 / /4 x 3 / /4 x 1 / /4 x 5 / /4 x 7 /8 stroke length / / / / / /8 double ended execution Double-ended punching machine The Kingsland Hydraulic Punching machines are available in double-ended execution, using a shared frame thus saving you space and money. A second machine is no longer needed for doubling the capacity and productivity. Both ends of the machine can be used at the same time up to maximum capacity. standard throat depth punch standard throat depth double punch (DP) deep throat model double punch (DPX) largest hole (standard equipment) / / / / / /4 largest hole (optional equipment)* / / / / maximum section features full stroke adjustment low power inching and adjustable stroke universal die bolster punching up to 2 1 /4 as standard large punch table with multi-purpose bolster removable table block for overhang channel/joist flange punching machines with very low maintenance requirements wide variety of applications for large hole punching, crimping, tube notching, bar bending, sheet bending, punch press applications etc. deep throat depth as standard overload relief on hydraulic system interchangeable bearings, seals and valves readily available from stockists of hydraulic equipment working height / / / / / /16 CORNER NOTCH (*) maximum capacity sq x 1 / sq x 1 / sq x 1 / sq x 1 / sq x 1 / sq x 1 /4 TUBE NOTCH (*) maximum outside diameter / / / / / /2 BENDING (*) bar bend. max. capacity x 1 / x 1 / x 5 / x 3 / x 3 / x 1 sheet bend. max. capacity x 1 / x 1 / x 1 / x 1 / x 1 / x 1 /4 standard equipment TECHNICAL DATA motorpower ,5 hp ,5 hp hp hp hp hp 60 P 70 P 80 P 95 P 125 P 175 P punch and die ø Ø Ø Ø Ø Ø 26 nett weight punch ,911 Ibs ,933 Ibs ,550 Ibs ,697 Ibs ,898 Ibs ,135 Ibs gross weight std. throat ,198 Ibs ,219 Ibs ,969 Ibs ,060 Ibs ,439 Ibs ,017 Ibs machine dimensions (L x W x H), inch x 28 x x 28 x x 28 x x 31 x x 32 x x 44 x 85 punch adaptors swing away punch stripper unit easy change punch holder universal die bolster heavy-duty punch table with scales, guide and backstop service toolkit work station guard instruction, operating and maintenance manual hydraulic oil fill packed dimensions (L x W x H), inch x 34 x x 34 x x 34 x x 37 x x 38 x x 50 x 95 nett weight double punch ,054 Ibs..... gross weight double punch ,330 Ibs ,065 Ibs ,341 Ibs ,638 Ibs ,969 Ibs ,402 Ibs ,086 Ibs ,395 Ibs ,907 Ibs.....6,946 Ibs ,789 Ibs machine dimensions (L x W x H), inch x 28 x x 28 x x 29 x x 31 x x 32 x x 44 x 85 packed dimensions (L x W x H), inch x 34 x x 34 x x 34 x x 37 x x 38 x x 50 x 97 * optional equipment

5 het Kingsland gamma hydraulische pons-knipmachines 1COMPACT 45 4 stations hydraulic steelworker 45 ton capacity 2COMPACT 60 5 stations hydraulic steelworker available in 50 and 65 ton USA HACO - ATLANTIC INC N. Houston Rosslyn Road HOUSTON TEXAS tel.: (+281) fax: (+281) hacotx@msn.com Fabricating Machinery 6315 Toronto St. Dallas,TX, (214) sales@fabmachine.com 3MULTI 80 5 stations double cylinder, standard throat available in 60, 70, 80, 95, 125 and 175 ton available with deep throat 4PUNCH 60 1 station hydraulic punching machine available in 60, 70, 80, 95, 125 and 175 ton deep throat standard CANADA HACO CANADA INC Dunwin Drive mississauga ontario l5l 1j5 tel.: (+1) fax: (+1) hacocanada@aol.com 550P hydraulic punching machine 50 ton 2 stations double cylinder, hydraulic 6125 D DOUBLE PUNCH punching machine available in 60, 70, 80, 95, 125 and 175 ton available with deep throat sales@kingslandeng1.demon.co.uk ref KL/PUNCH E inch/2002 VISUAL +32 (0)