FILED: NEW YORK COUNTY CLERK 09/18/ :45 PM INDEX NO /2017 NYSCEF DOC. NO. 27 RECEIVED NYSCEF: 09/18/2017 EXHIBITC

Transcription

1 EXHIBITC

2 ZMK grollp lnc ESTIMATE/WORKORDER NAME: Richards Residence ADDRESS: New York, NY DATE: TELEPHONE#: (212) (Hottenroth + Joseph Architects) davidc@hjnyc.com PROJECT#: 1605 JOBSITE: Same STARTDATE: Open FINISHDATE: WORK TO BEDONE: DIVISION02 - Site Construction Demolition & Removal - Remove selected walls and partitions. - Remove all interior doors, frames and hardware. (Saveand salvage hardware.) (Existing entry doors to remain.) - Remove all base, casing, crown and trim moldings. - Remove cabinetry, paneling, counters, millwork and closet interiors. - Remove stone and tile. - Remove wood flooring and sub-floor to expose the sleepers. - Remove the existing topping slabs in the bathrooms and the Laundry Room. - Remove existing topping slabs in the closets. - Remove glass and mirror. - Remove plumbing and light fixtures. - Remove appliances. - Remove abandoned MEP, conduit, pipe, wiring and ductwork. - Remove all debris. DIVISION03 - Concrete Concrete DIVISION05 - Metals - Pour and level a new light weight concrete topping slab in the Kitchen, Laundry Room and Laundry Corridor. (SeeNote #9) - Pour and level new light weight concrete topping slabs in the bathrooms. (See Note #9) Metal Fabrications - Provide and install miscellaneous steel angle supports for millwork. - Allowance to provide shop primed architectural drop in grilles for the HVACenclosures. - Allowance to provide shop primed architectural grilles for bathroom exhaust. $5, $2, $2, $2, $1, $24, $7, $6, ~ ~, ~ _ ~ _,- ~'_,_.,. ~~ ~,. _, ~.." ~~..II -,*.. ", ~.. ~ " " " "'I _ " "'.. ~. 26 WEST 20THSTREET, 2NDFLOOR, NEW YORK, NY 1O01l P: (212) ZMKGROUP.COM

3 ZMK group lnc Page2 DIVISION06 - Wood & Plastics Rough Carpentry - Frame and hang new walls and partitions. - Fur-out existing walls. - Frame and hang new suspended ceilings. - Box-out existing beams to a uniform size in the Master Bedroom. - Provide and install rough framing and blocking for window jamb returns and headers. - Frame and hang gypsum board window returns and headers. - Provide and install rough framing and blocking for new swing doors. - Provide and install rough framing and blocking for new pocket doors. - Provide and install rough framing and blocking for millwork and closet interiors. - Provide and install rough framing, blocking and sheathing for bathtub decks and aprons. - Provide and install rough framing, blocking and sheathing for shower curbs and lead pans. - Provide and install a 3/4" thick plywood subfloor over the existing sleepers in all dry locations scheduled to receive new hardwood flooring. - Allowance to provide and install standard size flush, non-rated metal access panels. (7) Finish Carpentry and Trim - Install new two-piece paint grade wood base molding. - Provide new two-piece paint grade wood base molding. $7, $4, $72, Install new one-piece paint grade wood door casing and stop molding. - Provide new one-piece paint grade wood door casing and stop molding. - Install new two-piece paint grade wood door casing and stop molding. - Provide new two-piece paint grade wood door casing and stop molding. - Install new paint grade window casing. - Provide new paint grade window casing. - Fabricate and install paint grade wood window sill and apron at the single window in the Living Room. - Install bathroom accessories. - Install medicine cabinets. - Install owner provided safe Millwork & Casework - Custom fabricate and install paint grade, shop primed radiator / air conditioner enclosures and fixed window panel in the Master Bedroom. - Custom fabricate and install paint grade, shop primed closet interiors with drawers and fixed and adjustable shelving in the Master Bedroom Closet. $2, $3, $ $3, $2, $4, $ $ $ $ $7, $9, $31, Custom fabricate and install a paint grade, shop primed vanity cabinet in the Master Bathroom. $5,880.00

4 ZMK gr()up IllC Page Millwork & Casework (Continue) - Custom fabricate and install a paint grade, shop primed panel for the bathtub apron in the Master Bathroom. - Custom fabricate and install paint grade, shop primed open bookcases with fixed and adjustable shelving in the Living Room. (Includes Hafele Magic Wire) - Custom fabricate and install a paint grade, shop primed radiator / air conditioner enclosure in the Living Room. $1, $22, Custom fabricate and install paint grade, shop primed open bookcases with fixed and adjustable shelving in the Children's Bedroom. - Custom fabricate and install paint grade, shop primed closet / storage cabinetry with doors, drawers and fixed and adjustable shelving in the Children's Bedroom. - Custom fabricate and install a paint grade, shop primed radiator / air conditioner enclosure / window seat in the Children's Bedroom. - Custom fabricate and install a paint grade, shop primed vanity cabinet in the Children's Bathroom. - Custom fabricate and install paint grade, shop primed closet interiors with fixed and adjustable shelving in the South Entry Closet. - Custom fabricate and install paint grade, shop primed cabinetry and panels in the Kitchen. - Custom fabricate and install a paint grade, shop primed radiator enclosure in the Kitchen. - Custom fabricate and install a paint grade, shop primed vanity cabinet in the Powder Room. - Custom fabricate and install a paint grade, shop primed wainscoting in the Powder Room. - Custom fabricate and install paint grade, shop primed cabinetry in the Laundry Room. - Custom fabricate and install paint grade, shop primed closet interiors in the North Entry Closet. - Provide door pulls and cabinet hardware. - Provide shop drawings and samples. $26, $3, $5, $42, $3, $5, $15, $5, TBD $1, $156,834.00

5 FILED: NEW YORK COUNTY CLERK 09/18/ :45 PM INDEX NO /2017 ZMK group lnc Page4 DIVISION07 - Thermal & Moisture Protection Waterproofing and Damp proofing - Provide and install a Laticrete waterproofing system on the floors in the Kitchen, Laundry Room, all bathrooms and full height in the showers. DIVISION08 - Doors & Windows Interior Doors & Frames - Frame and hang single swing doors. (8) - Frame and hang pairs of swing doors. (2) - Frame and hang pairs of pocket doors. (1) - Provide wood doors Hardware - Instalilocksets, door pulls and decorative door hardware. - Instalilocksets and decorative door hardware on apartment entry doors. - Provide door hardware Exterior Doors & Windows - Remove and replace existing windows Glass & Mirrar - Custom fabricate and install a 1/2" thick, clear, low iron tempered glass shower door and fixed side panels in the Children's Bathroom. - Custom fabricate and install a 1/4" thick, clear, low iron mirror panels with polished edges on the interior side of the door to the Children's Bathroom, the Master Bathroom and the Master Bedroom Closet. $10, $4, $1, $1, $9, $3, $1, TBD $103, $2, $1, $10, $16, $4, $103, $4, DIVISION09 - Finishes Plaster - Flat and ornamental - Custom fabricate and install custom cast plaster crown molding. - Tape all new walls, ceilings and soffits. - Provide level V skim coat to all walls and ceilings. - Plaster patch after demolition and MEP work Tile & Stone - Prepare, level and install tile on the walls and floors in the Master Bathroom. - Custom fabricate and install a stone top and low backsplash for the vanity in the Master Bathroom. - Custom fabricate and install stone cladding for the shower / tub niche in the Master Bathroom. - Custom fabricate and install a stone window sill in the Master Bathroom. - Custom fabricate and install a stone door saddle in the Master Bathroom. $19, $5, $17, $5, $3, $4, $1, $ $ $46,870.00

6 ZMK group lnc Page Tile & Stone (Continued) _ Prepare, level and install tile on the walls and floors in the Children's Bathroom. _ Custom fabricate and install a stone top and low backsplash for the vanity in the Children's Bathroom. _ Custom fabricate and install stone cladding for the shower niche in the Children's Bathroom. _ Custom fabricate and install a stone window sill in the Children's Bathroom. _ Custom fabricate and install a stone shower curb and door jambs in the Children's Bathroom. _ Custom fabricate and install a stone door saddle in the Children's Bathroom. _ Prepare, level and install tile on the floors in the Powder Room. _ Custom fabricate and install a stone top and low backsplash for the vanity in the powder Room. _ Custom fabricate and install a stone window sill in the Powder Room. _ Custom fabricate and install a stone door saddle in the powder Room. _ Prepare, level and install tile on the backsplashes in the Kitchen. _ Custom fabricate and install stone counters for the cabinetry in the Kitchen. _ Prepare, level and install tile on the backsplash in the Laundry Room. _ Custom fabricate and install a stone counter for the cabinet in the Laundry Room. _ Sealall newly installed stone and tile. - Provide tile Hordwood Flooring _ Provide and install a new "floating" plywood subfloor in all locations scheduled to receive new hardwood flooring. (The new subfloor will consist of two layers of 1/2" plywood laid over a sound matt.) _ Provide and install 3/4" X 2-3/4" X 23-1/2" French oak flooring from Exquisite Surfaces laid in a herringbone pattern without borders. _ Provide and install door saddles. _ Buff, seal and provide a natural oil wax finish to all newly install hard wood flooring Painting _ Prepare, prime and paint walls, ceilings, doors, windows and trim. $4, $3, $1, $ $2, $ $1, $2, $1, $ $1, $14, $ $3, $1, $16, $19, $70, $36, $67, $90,525.00

7 ZMK group lnc Page Painting (Continued) - Prepare and paint shop primed millwork. _ 5trip and prepare the apartment entry doors for painting Toilet and Bath Accessories DIVISION 11 - Equipment Appliances - Provide bathroom accessories. _ Allowance to provide a chrome plated shower rod. _ Provide medicine cabinets. (2) - Provide appliances. - Provide safe. - Install appliances. $15, $ $2, $ $1, $18, $2, $1, $52, $4, $22, DIVISION 15 - Mechanical Plumbing Work _ Provide and install new water, waste and vent piping from existing stacks and risers. _ Provide and install hot and cold water riser valves. - Install plumbing fixtures and fittings. _ Provide and install water piping for ice-maker. _ Provide and install water and waste piping for dishwasher. _ Custom fabricate and install lead pans for the shower. _ Provide and install laundry box with electronic leak detection and water shut off. _ Modify / relocate the existing gas piping and install new gas piping to the stove. - Cap, disconnect and remove existing services Plumbing Work - Heating _ Cap and disconnect existing steam piping at the existing risers. - Provide and install new supply and return steam piping from existing risers and stacks. _ Provide and install new and existing radiators and convector. (Includes new valves and traps) $40, $15, Plumbing Fixtures - Provide plumbing fixtures HVAC Work _ Provide and install through-wall air conditioners in existing masonry openings. - Provide and install in-line exhaust fans. - Provide and install condensing units. _ Custom fabricate and install interior exhaust ductwork and back draft dampers. _ Custom fabricate and install exterior exhaust ductwork and weather caps. - Provide and install thermostats for radiators. $28, $20, $28,932.00

8 ZMK group IllC Page HVAC Work (Continued) DIVISION 16 - Electrical - Provide rigging and exterior ductwork installation. - Provide controlled inspections and sign-ofts Electrical Work - Provide power, locate and install general purpose receptacles. - Provide power, locate and install GFI receptacles. - Provide power, locate and install dedicated appliance and equipment outlets. - Provide power, locate and install light fixtures. - Provide power, locate and install switches and dimmers. - Provide power, locate and install smoke and carbon monoxide detectors. $17, By Owner - Provide power, locate and install dedicated line voltage connections for HVACequipment. - Provide power, locate and install low voltage control / thermostat wiring. - Provide power, locate and install radiant floor heat in bathrooms. - Locate and install telephone / data receptacles. - Locate and install CATV receptacles. - Provide and install electronic interface so that the Ariadni dimmers can control the LED fixtures. - Cap and disconnect existing service. - Provide and install temporary light and power. - Provide and install new circuit breaker panel. - Provide and install new AFCIbreakers Lighting Fixtures GENERALCONDITIONS $62, Provide light fixtures. $20, Supervision. - Debris removal. - Protection. - Telephone and Fax. - Deliveries. - Temporary facilities. $37, $62, $20, $67, SUBTOTAL: 10% Fee@5% 3% TOTAL: Estimated Project Length: $995, $99, $49, $29, $1,174, Weeks

9 ZMK group lnc Page8 Payment Schedule: Date: First Payment: $293, due prior to commencement. Additional payments will be requisitioned on a percent complete basis. NOTES: 1. The above cost / trade breakdown of the base bid sum is submitted for use by the Owner and / or Architect in evaluating this Proposal and is not intended as a basis for establishing prices for additions to or deletions from the contract sum. 2. will leave the entire job location broom swept upon the completion of work. 3. will need elevations and/or material specifications in order to provide pricing for this item. 4. Please note that after demolition is complete the architect, flooring subcontractor and general contractor will meet on site to review the exact extent of the needed floor repairs. 5. Please note that the electrical work excludes the removal of existing violations, the relocation or extension of the building intercom, relocation or removal of existing feed through risers, final connections to telephone, data and CATVservices and equipment, furnish, installation or connection of audio equipment and controls, furnish HVACcontrols and equipment or the final connections to low voltage controls or engineering or special submittals to the Bureau of Electrical Control Advisory Board. 6. Please note that due to constant changes in the humidity and/or ambient temperature in New York City, ZMK cannot be responsible for cracking and separation of wood moldings and flooring materials unless constant humidity and temperature are continually maintained throughout the residence both during and following the completion of construction. Wood is a natural material and expansion and contraction due to fluctuation in temperature and humidity is a natural occurrence. is happy to discuss options for the maintenance of constant humidity and temperature. 7. Pleasenote all millwork will be fabricated with the finishes noted. All non-exposed interiors will be prefinished Maple. All natural wood finishes will receive one (1) coat of stain and a satin or matt finish lacquer. All millwork specified as primed will be painted by hand on site. 8. The above contract includes up to 12 custom colors by Benjamin Moore. All walls and ceilings will receive a latex based flat or eggshell finish. All doors and trim will receive an alkyd based Satin Impervo finish. Special custom paints and/or deep colors will require an additional cost to be added to the paint cost of the Project.

10 ZMK grollp lllc 925 Park Avenue, 26 Page9 NOTES:(Continued) 9. Please note this Proposal includes a new light weight concrete topping slabs in the Kitchen, Laundry Room and all Bathrooms. This Proposal includes an allowance for a pour to a maximum depth of three inches. Eachadditional inch of depth of concrete will add $4.00 per square foot to the cost of the concrete work. 10. Salestax will be added to the above costs according to the capital improvement guidelines of New York State unless a signed certificate of capital improvement (5T-124) is provided to V Accepted By, Ii!~~~,. ~~'-~ Date:

11 ZMK gr()up ll1c Rider to Contract RichardsResidence In the event of any inconsistencybetween the terms of this Riderand the Contract documents to which it is attached the terms and conditions of this Ridershall control. 1. Upon execution of this Contract, Owner shall make an advancepayment equal to two hundred ninety-three thousand, sevenhundred sixteen dollars ($293,716.00), representing 25% of the Contract Sum. Contractor shall submit requisitions to Owner no more frequently than every three weeks. Requisitionsshall reflect a 10% line item retainageof original contract values. Upon 90% Completion of work items, the retainage will be reducedto 5% of the value of each work item. The deposit sum shall be amortized at the samerate at which the work is complete. The product of the deposit sum multiplied by the percentage of completion will be subtracted from the value of the moneysdue on each requisition. 2. Upon receipt of the Project PunchList,ZMKGroup, Inc. and the Architect will mutually determine the value of the outstanding contracted work to be completed. The Final Retainage ("Final Retainage")will be 150% of the value of this PunchListwork. The outstanding balance remaining lessthis FinalRetainagewill be paid in full within seven(7) businessdays of ZMK Group, Inc.'s commencement of the Punchlist. 3. Requisitionswill be submitted to the Architect for their review and certification. Payment certified by the Architect will be due to the Contractor ten (10) businessdaysafter the requisition is submitted to the Architect. In the event that the Contractor does not receive payment fifteen (15) daysafter payment is due, the Contractor will havethe fight to stop all work on the Project after giving at least five (5) days' written notice to the Owner and the Architect. All expensesincurred by the Contractor due to a work stoppagethat is a result of non-payment and/or late payment will be paid for by the Owner prior to the resumption of work. 4. The duration of the Project will be increasedor decreaseddue to changesin the scope of the work that are approved by the Owner once the Project begins. One hundred thirty-five (135) workdays excludesall holidays,weekendsand daysthe building will not allow work to be performed. Additionally, changesin the scopeof work that are requested by the Owner and/or Architect that result in an increasein the duration of the Project may causean increasein the General Conditions cost for the Project. This additional GeneralConditionscharge is not a penalty. The GeneralConditionschargecovers'scost of extended supervision required to staff the Project beyond the original GeneralConditionstimeframe provided in the basecontract. Any increasein the duration of the Project that is causedby ZMKGroup, Inc. and/or any of their subcontractorswill not result in an additional GeneralConditions charge. 26 WEST20TH 3TREET,2ND?LOOR,Nn""YORK, NY P: (212) ZMKGROUP.COM

12 ZMK gr()up li1c Richards Residence Rider to Contract Page 2 5. In the event additional work isadded to the Project,ZMKGroup, Inc.will not proceed with additional work beyond the scopeof the attached proposal and Project drawings until an additional work order is approved and signedby the Owner. There will not be any retainage held on additional work order work. The deposit payment for additional work orders is due upon the approval of the additional work order. The amount of the deposit will vary basedon the specifictype of work approved. ZMKGroup, Inc. will proceed with additional work order work upon the receipt of written approval from the Owner. The additional work order deposit must be received by ZMKGroup, Inc. within five (5) daysof the approval of an additional work order. 6. In the event a PunchList is required, the Architect and/or OWnerwill provide one signed written Punchlist for to complete. This Punchlist should be provided within seven(7) daysof the substantial completion of the Project. 7. In the event of a disagreement over finishesand/or materials the Architect's decision is final. 8. ZMKGroup, Inc. will supply all labor and materials necessaryto complete the work for this Project. ZMKGroup, Inc. will be responsiblefor all materials that they are contracted to supply for the completion of the Project. 9. ZMKGroup, Inc.'s NYClicense number is Accepted by: ---V-Vl- ~qf-m-~-s'-~~i;r-gi-!'-i.-~c<...,-i;-ha-r~-ds":":(,- _ President