SERIES SURGICAL LIGHTS

Transcription

1 SERIES SURGICAL LIGHTS TEC-B-0012 REV1 Skytron's Aurora LED Surgical Lighting provides advanced bright, cool and color correct illumination to the surgical field and a selectable color temperature of 4,000K (soft white) or 4,500K (bright white) based upon surgeon preference for every procedure. Focusable LEDs extend illumination range while retaining maximum intensity at any distance, with LED pod life retaining 80% of original intensity for an average of 10 years or 20,000 hours of use. Typical applications include General, Orthopedic, Plastics, Vascular, Cardiovascular, OB/GYN, Trauma, Neurosurgery and Urology.

2 AUR5 2267mm 89 1/4" 610mm Power Consumption: 144 watts (490 BTU/hr) Amperage: 1.6 amps Intensity: 4,000K=135,000 Lux (12,542fc) 4,500K=120,000 Lux (11,148fc) Fixture Weight: 132 lbs./59.9 Kg. Moment Load: ft. lbs./532.8 N m 8'-4" min. 10'-5" max. TEC-B REV0

3 AUR5TV 2267mm 89 1/4" 1" Diameter CAMERA READY Camera Connector 610mm Power Consumption: 144 watts (490 BTU/hr) Amperage: 1.6 amps Intensity: 4,000K=135,000 Lux (12,542fc) 4,500K=120,000 Lux (11,148fc) Fixture Weight: lbs./62.4 Kg. Moment Load: 426 ft. lbs./577.3 N m 8'-4" min. 10'-5" max. TEC-B REV0

4 AUR7 2716mm 107" 1200mm 47 1/4" 1969mm 77 1/2" 425mm 16 3/4" Power Consumption: 144 watts (490 BTU/hr) Amperage: 1.6 amps Intensity: 4,000K=160,000 Lux (14,870fc) 4,500K=139,000 Lux (12,918fc) Fixture Weight: 149 lbs./67.6 Kg. Moment Load: ft. lbs./835 N m 8'-4" min. 10'-5" max. TEC-B REV0

5 AUR7TV 2716mm 107" 1200mm 47 1/4" 1" Diameter CAMERA READY 1969mm 77 1/2" Camera Connector 425mm 16 3/4" Power Consumption: 144 watts (490 BTU/hr) Amperage: 1.6 amps Intensity: 4,000K=160,000 Lux (14,870fc) 4,500K=139,000 Lux (12,918fc) Fixture Weight: lbs./71 Kg. Moment Load: ft. lbs./888.8 N m 8'-4" min. 10'-5" max. TEC-B REV0

6 AUR mm 97" 610mm Power Consumption: 288 watts (980 BTU/hr) Amperage: 3.2 amps Intensity: 4,000K=270,000 Lux (25,084fc) 4,500K=240,000 Lux (22,296fc) Fixture Weight: lbs./97.6 Kg. Moment Load: ft. lbs./1,094.3 N m 8'-9" min. 10'-5" max. TEC-B REV0

7 AUR55TV 2462mm 97" 1" Diameter CAMERA READY Camera Connector 610mm Power Consumption: 288 watts (980 BTU/hr) Amperage: 3.2 amps Intensity: 4,000K=270,000 Lux (25,084fc) 4,500K=240,000 Lux (22,296fc) Fixture Weight: lbs./100.1 Kg. Moment Load: ft. lbs./1,138.9 N m 8'-9" min. 10'-5" max. TEC-B REV0

8 AUR mm 107" 1200mm 47 1/4" 1969mm 77 1/2" 425mm 16 3/4" 610mm Power Consumption: 288 watts (980 BTU/hr) Amperage: 3.2 amps Intensity: 4,000K=295,000 Lux (27,412fc) 4,500K=259,000 Lux (24,066fc) Fixture Weight: lbs./105 Kg. Moment Load: ft. lbs./1,332.6 N m 8'-9" min. 10'-5" max. TEC-B REV0

9 AUR75TV 2716mm 107" 1200mm 47 1/4" 1" Diameter CAMERA READY 1969mm 77 1/2" Camera Connector 425mm 16 3/4" 610mm Power Consumption: 288 watts (980 BTU/hr) Amperage: 3.2 amps Intensity: 4,000K=295,000 Lux (27,412fc) 4,500K=259,000 Lux (24,066fc) Fixture Weight: lbs./108.7 Kg. Moment Load: 1,016.2 ft. lbs./1,377 N m 8'-9" min. 10'-5" max. TEC-B REV0

10 AUR7TV5 2716mm 107" 1200mm 47 1/4" 1" Diameter CAMERA READY 1969mm 77 1/2" Camera Connector 425mm 16 3/4" 610mm Power Consumption: 288 watts (980 BTU/hr) Amperage: 3.2 amps Intensity: 4,000K=295,000 Lux (27,412fc) 4,500K=259,000 Lux (24,066fc) Fixture Weight: lbs./108.7 Kg. Moment Load: 1,023.2 ft. lbs./1,386.5 N m 8'-9" min. 10'-5" max. TEC-B REV0

11 2657mm 105" 1335mm 52 1/2" AUR mm Power Consumption: 432 watts (1,469 BTU/hr) Amperage: 4.8 amps Intensity: 4,000K=405,000 Lux (37,626fc) 4,500K=360,000 Lux (33,444fc) Fixture Weight: lbs./141.7 Kg. Moment Load: 1,269.5 ft. lbs./1,720.2 N m 9'-2" min. 10'-4" max. TEC-B REV0

12 2657mm 105" 1335mm 52 1/2" AUR555TV 1" Diameter CAMERA READY Camera Connector 610mm Power Consumption: 432 watts (1,469 BTU/hr) Amperage: 4.8 amps Intensity: 4,000K=405,000 Lux (37,626fc) 4,500K=360,000 Lux (33,444fc) Fixture Weight: lbs./144 Kg. Moment Load: 1,269.5 ft. lbs./1,720.2 N m 9'-2" min. 10'-4" max. TEC-B REV0

13 2657mm 105" 1335mm 52 1/2" AUR mm 47 1/4" 1969mm 77 1/2" 610mm 425mm 16 3/4" Power Consumption: 432 watts (1,469 BTU/hr) Amperage: 4.8 amps Intensity: 4,000K=430,000 Lux (39,954fc) 4,500K=379,000 Lux (35,214fc) Fixture Weight: lbs./149.4 Kg. Moment Load: 1,445.4 ft. lbs./1,958.5 N m 9'-2" min. 10'-4" max. TEC-B REV0

14 2657mm 105" 1335mm 52 1/2" AUR57TV5 1" Diameter 1200mm 47 1/4" CAMERA READY 1969mm 77 1/2" Camera Connector 610mm 425mm 16 3/4" Power Consumption: 432 watts (1,469 BTU/hr) Amperage: 4.8 amps Intensity: 4,000K=430,000 Lux (39,954fc) 4,500K=379,000 Lux (35,214fc) Fixture Weight: lbs./151.9 Kg. Moment Load: 1,485.2 ft. lbs./2,012.4 N m 9'-2" min. 10'-4" max. TEC-B REV0

15 2657mm 105" 1335mm 52 1/2" AUR575TV 1" Diameter 1200mm 47 1/4" CAMERA READY 1969mm 77 1/2" Camera Connector 610mm 425mm 16 3/4" Power Consumption: 432 watts (1,469 BTU/hr) Amperage: 4.8 amps Intensity: 4,000K=430,000 Lux (39,954fc) 4,500K=379,000 Lux (35,214fc) Fixture Weight: lbs./151.9 Kg. Moment Load: 1,445.4 ft. lbs./1,958.5 N m 9'-2" min. 10'-4" max. TEC-B REV0

16 AURORA II WALL CONTROL 120VAC 30VDC 3/4" CONDUIT CONDUIT CONNECTOR FINISHED WALL NOTE: FRONT EDGE OF "BACK-BOX" MUST BE FLUSH WITH FINISHED WALL SURFACE CONTROL BOX WITH RECESS MOUNT FLANGE INSTALLED RECESS DEPTH "BACK-BOX" DIMENSIONS SINGLE / DUAL 8-1/2"W x 11-5/8"H x 4"D TRIPLE 10-1/2"W x 14-1/2"H x 4"D (2) GROMMETS A B FRONT PANEL C ANCHOR (4) RECESS MOUNT FLANGE E D SCREW (4) JUNCTION BOX 20,000 HOUR INDICATOR MAIN POWER 2A, 250V Fast Acting 2A, 250V Fast Acting COLOR TEMPERATURE INDICATOR 4,500K WHEN ILLUMINATED RECESSED MOUNT FRONT PANEL RECESS MOUNT FLANGE OPTIONAL BACK-BOX INSTALLATION A B C D E F ANCHOR (4) SINGLE OR DUAL 8" 4" 10" 6-7/8" 7-5/8" 5-7/8" DIMENSIONS TRIPLE 10" 4" 13-1/2" 8-5/8" 11" 6-3/8" SCREW (4) RECESS MOUNT FLANGE 11-3/4"W x 14"H 13-3/4"W x 17-1/4"H ANCHOR (4) 20,000 HOUR INDICATOR MAIN POWER 2A, 250V Fast Acting 2A, 250V Fast Acting COLOR TEMPERATURE INDICATOR 4,500K WHEN ILLUMINATED F 1" 3" 3" C SCREW (4) SURFACE MOUNT SIDE VIEW A BACK VIEW TEC-B REV0

17 STANDARD MOUNTING STRUCTURE GUIDELINE TOP VIEW STIFFENER PLATE DETAIL 6" 12" 9-1/2" Hole for Access to Fixture Junction Box 6" STIFFENER PLATE (provided by others) 9-1/2" 12" 2" x 2" ANGLE SWAY BRACING 90 APART - 4 EACH (see note 2) Structural Ceiling (4) 2" x 2" Angle Sway Bracing (see note 2) Finished Ceiling 1-3/8" 12" x 12" x 3/8" Stiffener Plate 3/4" Metal Flex (see note 3) Fixture Junction Box 3/4" All Thread Rod (see note 1) 6" Max/ 4 Min. 2-1/4" ± 1/4" 15" dia. Mounting Plate (SKYTRON Supplied) 16-1/2" dia. Access Hole 18" dia. Ceiling Cover (SKYTRON Supplied) NOTES 3/4" support rods located for total support of light, all labor and materials for fabrication supplied by General Contractor. 3/4" nuts and washers for support of SKYTRON mounting plate supplied by contractor (8 ea. required). The mounting structure must be attached to structural ceiling and BRACED TO ALLOW NO TWISTING OR LATERAL MOTION and shall be designed not to provide a degree of rotation greater than two-tenths of a degree at the mounting plate. 3/4" metal conduit and minimum 12AWG wire size (3 wires per lighthead) required between fixture and SKYTRON supplied wall control. All metal conduit, wiring, and other electrical materials as well as installation labor for such materials associated with the installation of the SKYTRON surgical light to be provided by Electrical Contractor. All installations of SKYTRON surgical lights should be under the direct supervision of a SKYTRON representative. All wiring to be in accordance with local codes and by a certified electrician. Optional Camera Ready Systems require a 1 diameter conduit from the fixture junction box to the camera control connector junction box. 65 camera control cable with faceplate and connector supplied by SKYTRON. and 2 x 4 junction box supplied by General or Electrical Contractor. CONTRACTOR HAS FINAL RESPONSIBILITY for the strength and stability of the Mounting Structure. This is a GENERAL GUIDELINE ONLY. TEC-B REV0

18 RECESSED MOUNTING STRUCTURE GUIDELINE TOP VIEW STIFFENER PLATE DETAIL 6" 12" 9-1/2" Hole for Access to Fixture Junction Box 6" STIFFENER PLATE (provided by others) 9-1/2" 12" 2" x 2" ANGLE SWAY BRACING 90 APART - 4 EACH (see note 2) Structural Ceiling Finished Ceiling (4) 2" x 2" Angle Sway Bracing (see note 2) 3/4" 12" x 12" x 3/8" Stiffener Plate 3/4" Metal Flex (see note 3) Fixture Junction Box 3/4" All Thread Rod (see note 1) 6" Max/ 4 Min. 1/4" NOTES 3/4" support rods located for total support of light, all labor and materials for fabrication supplied by General Contractor. 3/4" nuts and washers for support of SKYTRON mounting plate supplied by contractor (8 ea. required). The mounting structure must be attached to structural ceiling and BRACED TO ALLOW NO TWISTING OR LATERAL MOTION and shall be designed not to provide a degree of rotation greater than two-tenths of a degree at the mounting plate. 3/4" metal conduit and minimum 12AWG wire size (3 wires per lighthead) required between fixture and SKYTRON supplied wall control. All metal conduit, wiring, and other electrical materials as well as installation labor for such materials associated with the installation of the SKYTRON surgical light to be provided by Electrical Contractor. All installations of SKYTRON surgical lights should be under the direct supervision of a SKYTRON representative. All wiring to be in accordance with local codes and by a certified electrician. Optional Camera Ready Systems require a 1 diameter conduit from the fixture junction box to the camera control connector junction box. 65 camera control cable with faceplate and connector supplied by SKYTRON. and 2 x 4 junction box supplied by General or Electrical Contractor. CONTRACTOR HAS FINAL RESPONSIBILITY for the strength and stability of the Mounting Structure. This is a GENERAL GUIDELINE ONLY. 15" dia. Mounting Plate (SKYTRON Supplied) 16-1/2" dia. Access Hole 20-1/8" dia. Ceiling Cover (SKYTRON Supplied) HEADROOM CLEARANCE INCREASE - 2" TEC-B REV0

19 Typical Mounting Structure Shown SEISMIC APPLICATION MOUNTING STRUCTURE GUIDELINE TOP VIEW STIFFENER PLATE DETAIL 6" SS-L Contact SKYTRON representative for Seismic Calculations if Applicable 12" 9-1/2" Hole for Access to Fixture Junction Box 6" STIFFENER PLATE (provided by others) 9-1/2" 12" ANGLE SWAY BRACING 90 APART - 4 EACH (see note 2) Structural Ceiling Finished Ceiling (4) Angle Sway Bracing (see note 2) 1-3/8" 12 x 12 x 3/8 Stiffener Plate 3/4" Metal Flex (see note 3) Fixture Junction Box Support Rods (see note 1) 18" dia. Mounting Plate (SKYTRON Supplied) 19" dia. Access Hole 20-1/8" dia. Ceiling Cover (SKYTRON Supplied) As Specified by Seismic calculations 2-1/4" ± 1/4" B UNIVERSAL ADAPTER PLATE B CASTLE TYPE CEILING COVER NOTES Support rods as specified per seismic calculations are to be located for total support of light, all labor and materials for fabrication supplied by General Contractor. Nuts and washers for support of SKYTRON mounting plate supplied by contractor (8 ea. required). The mounting structure must be attached to structural ceiling and BRACED TO ALLOW NO TWISTING OR LATERAL MOTION and shall be designed not to provide a degree of rotation greater than two-tenths of a degree at the mounting plate. 3/4" metal conduit and minimum 12AWG wire size (3 wires per lighthead) required between fixture and SKYTRON supplied wall control. All metal conduit, wiring, and other electrical materials as well as installation labor for such materials associated with the installation of the SKYTRON surgical light to be provided by Electrical Contractor. All installations of SKYTRON surgical lights should be under the direct supervision of a SKYTRON representative. All wiring to be in accordance with local codes and by a certified electrician. Optional Camera Ready Systems require a 1 diameter conduit from the fixture junction box to the camera control connector junction box. 65 camera control cable with faceplate and connector supplied by SKYTRON. and 2 x 4 junction box supplied by General or Electrical Contractor. CONTRACTOR HAS FINAL RESPONSIBILITY for the strength and stability of the Mounting Structure. This is a GENERAL GUIDELINE ONLY. TEC-B REV0

20 SKYTRON