QUALIFICATION LOGBOOK

Transcription

1 QUALIFICATION LOGBOOK Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance (6566) November 2015 Version 4.0 Candidate Logbook/Work-Based Evidence Record Mandatory Units

2 About City & Guilds As the UK s leading vocational education organisation, City & Guilds is leading the talent revolution by inspiring people to unlock their potential and develop their skills. We offer over 500 qualifications across 28 industries through 8500 centres worldwide and award around two million certificates every year. City & Guilds is recognised and respected by employers across the world as a sign of quality and exceptional training. City & Guilds Group The City & Guilds Group operates from three major hubs: London (servicing Europe, the Caribbean and Americas), Johannesburg (servicing Africa), and Singapore (servicing Asia, Australia and New Zealand). The Group also includes the Institute of Leadership & Management (management and leadership qualifications), City & Guilds Land Based Services (land-based qualifications), the Centre for Skills Development (CSD works to improve the policy and practice of vocational education and training worldwide) and Learning Assistant (an online e-portfolio). Copyright The content of this document is, unless otherwise indicated, The City and Guilds of London Institute and may not be copied, reproduced or distributed without prior written consent. However, approved City & Guilds centres and candidates studying for City & Guilds qualifications may photocopy this document free of charge and/or include a PDF version of it on centre intranets on the following conditions: centre staff may copy the material only for the purpose of teaching candidates working towards a City & Guilds qualification, or for internal administration purposes candidates may copy the material only for their own use when working towards a City & Guilds qualification The Standard Copying Conditions (see the City & Guilds website) also apply. Please note: National Occupational Standards are not The City and Guilds of London Institute. Please check the conditions upon which they may be copied with the relevant Sector Skills Council. Published by City & Guilds, a registered charity established to promote education and training Every effort has been made to ensure that the information contained in this publication is true and correct at the time of going to press. However, City & Guilds products and services are subject to continuous development and improvement and the right is reserved to change products and services from time to time. City & Guilds cannot accept liability for loss or damage arising from the use of information in this publication. City & Guilds 1 Giltspur Street London EC1A 9DD learnersupport@cityandguilds.com

3 Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services - Highways Maintenance (Construction) (6566) Version 3.0 July 2013 (May 2014) Mandatory Units Qualification title Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Modular Pavement Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Drainage Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Excavation and Reinstatement Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Flexible Pavement Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Structural Concreting Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Non-structural Concreting Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Laying Kerbs and Channels Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance General Building Operations City & Guilds qualification number Qualification Accreditation Number (QAN) /7986/ /7986/ /7986/ /7986/ /7986/ /7986/ /7986/ /7986/7 3 City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

4 City & Guilds Believe you can Version and date Change detail Section V2 July 2013 V 4.0 November 2015 Reference to being observed in the workplace on several occasions has been deleted New QAN 601/7986/7 Pathways updated Added unit 358 Deleted units 611 and 711 Units 633, 648, 672 and 679, 705, 660 and 701 content updated and replaced by 316, 331, 352, 362, 366 and 370 Phone numbers deleted Final page of each unit p Units 5.3 Skill scan 5.4 Tracking document Units Last pages City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566) 4

5 Contents 1 About your Candidate Logbook/Work-Based Evidence Record 6 2 About your approved centre 8 3 About candidates 10 4 Qualification assessment 11 5 Using your logbook 13 Unit 101 Conforming to general health, safety and welfare in the workplace 49 Unit 218 Conforming to productive working practices in the workplace 55 Unit 240 Excavating holes and trenches - manual digging in the workplace 59 Unit 292 Laying flexible pavements in the workplace 67 Unit 294 Laying modular pavement in the workplace 75 Unit 297 Locating and protecting utilities apparatus and sub-structures in the workplace 83 Unit 370 Setting out secondary dimensional work control in the workplace 91 Unit 608 Moving, handling and storing resources in the workplace 99 Unit 640 Placing and finishing non-specialist concrete in the workplace 106 Unit 682 Reinstating excavation and highway surfaces in the workplace 114 Unit 731 Pouring concrete to form structures in the workplace 122 Unit 732 Erecting and striking proprietary formwork in the workplace 130 Unit 733 Laying kerbs and channels in the workplace 138 Unit 740 Installing drainage in the workplace 146 Appendix 1 Summary of City & Guilds assessment policies City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

6 1 About your Candidate Logbook/Work-Based Evidence Record 1.1 Contact details Candidate name Candidate address Centre name Centre number Programme start date City & Guilds registration number Date of registration with City & Guilds This Candidate Logbook/Work-Based Evidence Record is your personal achievement in practical work carried out mostly in the workplace and knowledge assessments achieved. It may not be possible to replace this document, therefore it should be kept in good condition and in a safe place to be used by you to record your progress. Once completed, you must keep this portfolio for a period of three years. During this time your training centre can request that you submit your portfolio to them. This will be returned to you. Keep a record of relevant contact details in the space provided below. You may find it helpful to make a note of phone numbers and addresses here. Your Assessor(s) Internal Quality Assurer (IQA) Quality Consultant (QC) 6 City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

7 1.2 Introduction to the logbook This logbook will help you complete the units in Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services - Highways Maintenance (Construction) (6566). It contains forms you can use to record your evidence of what you have done. There are 8 pathways within the Diploma. You should discuss and agree with your assessor /tutor which of pathway and which units you are going to work towards. This Logbook contains the 14 mandatory units only. The optional and elective units can be found in a zip file on the City & Guilds Website. About City & Guilds City & Guilds is your awarding body for this qualification. City & Guilds is the UK s leading awarding body for vocational qualifications. Information about City & Guilds and our qualifications is available on our website 7 City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

8 2 About your approved centre Types of approved centres Assessment for your qualification will be carried out at your centre. Your centre may be your place of work, a college, training provider or a combination of these. City & Guilds approves centres to offer their qualifications and regularly monitors them to make sure they meet our quality standards and follow our assessment policies. Centre responsibilities Your centre is responsible for the administration of your qualification. Centre staff will: register you with City & Guilds give you your City & Guilds enrolment number apply for your certificate(s) when you have completed your qualification or units. Centres are also responsible for supporting you as your work towards your NVQ. Centres will: carry out an initial assessment with you tell you about any learning or training (and resources) you will need to help you complete your qualification provide an induction programme to explain how the assessment process works produce an assessment plan for you. Assessment roles The following people at your centre will help you achieve your qualification. The Assessor The assessor is the person you will have the most contact with as you work towards your qualification. Your assessor will: help you identify any training you need agree an assessment plan with you help you plan and organise your workload and evidence observe you carrying out your job in the workplace over a period of time ask you questions about the work you do make decisions about your evidence judge when you are competent and meet the national standards give you feedback about your evidence and competence. You may have more than one assessor depending on which units of the qualification you take. The Internal Quality Assurer (IQA) The Internal Quality Assurer (IQA) maintains the quality of assessment within the centre. City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566) 8

9 The Work-Based Recorder/Expert Witness The role of the work-based recorder/expert witness is to: observe you carrying out work activities take photographs as evidence of work carried out authenticate work based recordings and testimonies ensure all work meets current industrial standards ensure all work is carried out in a safe manner be in regular communication with your assessor to evaluate your performance on site try to make sure you get the relevant work experience needed to meet the criteria of your NVQ provide support, guidance and motivation to help you complete your NVQ successfully 9 City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

10 3 About candidates Candidate role and responsibilities Your responsibilities as a City & Guilds candidate are to: provide your centre with your personal details so you can be registered with City & Guilds participate in an initial assessment and induction agree a personal assessment plan with your assessor collect and organise your evidence as agreed in your assessment plan attend regular meetings with your assessor to discuss your progress and to amend your plan when required meet with other centre and City & Guilds staff to talk about your qualification and evidence make sure you understand and comply with health and safety law and regulations. Your centre may ask you to agree and sign a learning contract with them to show how you will be assessed for your qualification. Learner registration number Make sure you keep a note of your unique City & Guilds registration number on the front page of this logbook. Moving to a new centre If you change jobs or move to a new centre before you complete your qualification, you may be able to complete it at a new centre. Ask your centre to apply for any certificates of unit credit for you before you leave, and add them to your records. A new centre will need your candidate enrolment number, your assessment records and evidence to help you complete your qualification. City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566) 10

11 4 Qualification assessment 4.1 Before you start your qualification Initial assessment Before you start work on your qualification you will meet with your assessor to discuss what you need to do to complete your qualification. This can include: checking you are taking the right qualification level checking you have chosen suitable units identifying any training or learning you will need to help you gain your qualification agreeing an assessment plan signing a learning contract. Skill scan As part of this meeting, you will discuss the skills and knowledge you may already have, and decide how this can be used towards your qualification. This process is sometimes called a skill scan. There is a Skill Scan Form in this logbook you can use to record the skills you may already have. 11 City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

12 4.2 The assessment process Once you have chosen your units you will make and agree an assessment plan with your assessor. This will show: the units the plan covers when you will be assessed where the assessment will take place what you will be doing what evidence you will produce who will assess you. The plan should also indicate the methods of assessment to be used to collect your evidence. Evidence can include: direct observation in the workplace by a qualified assessor witness testimony of work carried out by you in the workplace written by an expert witness questioning this could be verbal, written or computer based other evidence which can include photographs or personal accounts. Assessment requirements Site Observations (SO) should be conducted in the workplace by your Assessor. For individual criteria not directly observed, evidence of your ability to complete a number of different tasks to confirm competence must be recorded. Types of evidence SO = Site Observation OQ = Oral Question WQ = Written Question & Answer WT = Witness Testimony PS = Photographic Supplementary PD = Professional Discussion The following people at your centre will explain the assessment and recording process and help you achieve your unit(s). The assessor/tutor The assessor/tutor is the person you will have the most contact with as you work towards your unit(s). You may have more than one assessor/tutor depending on which unit(s) you take or you may be assessed by a person who is not your tutor. The Internal Quality Assurer (IQA) The IQA maintains the quality of assessment within the centre. The Qualification Consultant (QC) The QC works for City & Guilds and helps to ensure that your centre meets the required standards for quality and assessment. City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566) 12

13 5 Using your logbook Recording forms This logbook contains all of the forms you and your assessor will need to plan, review and organise your evidence. Your assessor will be able to help you decide which forms you need to complete and help you fill them in. Candidate job profile You can use this form to record your personal details if you don t already have a Candidate Résumé/ CV. Skill scan/initial assessment This can be used to record the skills and knowledge you may already have. This may be part of your initial assessment. Overall unit sign-off You can use this form to log your achievement of the units for the whole qualification including completion of assignments and online assessment On-site assessment plan/feedback You and your assessor will use this form to plan each assessment session. Your assessor will use this form to give feedback on the task. It will also enable you and your assessor to plan what actions need to be done before the next session. On-site observation report Your assessor will complete during observation. You will both sign this as a true record. Professional discussion supplementary evidence sheet To be completed by you, your work-based recorder or another witness to evidence meeting assessment criteria that could not be signed off during direct observation with your assessor. Oral questioning supplementary evidence sheet Your assessor will use this form to log any additional questions and answers asked during observation or to mop up any missing evidence. Photographic supplementary evidence Use this form to include a photo and brief description of the task being carried out. Work-based recorder details To be completed by your work-based recorders to confirm occupational competence. Assessor briefing and report continuation sheet Additional space for your assessor to make notes Signature sheet This is used to record the details of staff that will provide you with witness testimony. Units These record where the evidence you produce meets the requirements of the unit. You should give each piece of evidence an evidence reference number. Please photocopy these forms as many times as required to log the evidence. 13 City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

14 5.1 Candidate job profile If you already have your own CV you can use that instead of this form. Candidate name: Place of work: Assessor: Outline of job role: Previous roles & responsibilities relevant to the qualification: Previous qualification and training relevant to the qualification Qualification/Training Where achieved Date achieved Grade City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566) 14

15 5.2 Units To achieve the Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Modular Pavement ( ), you must achieve 31 credits from the mandatory units and a minimum of 10 credits from the optional units available. Additional units may be achieved from the elective units but they will not count towards the qualification. Unit no. UAN Mandatory Unit level Unit title 101 A/503/ Conforming to general health, safety and welfare in the workplace 218 J/503/ Conforming to productive working practices in the workplace Credit value 2 7 GLH J/503/ Laying modular pavement in the workplace J/506/ Setting out secondary dimensional work control in the workplace 608 F/503/ Moving, handling and storing resources in the workplace Optional 239 T/503/ Establishing work area protection and safety in the workplace 698 K/503/ Segregating the area for highways works in the workplace Elective 224 D/600/ Erecting and dismantling access/working platforms in the workplace M/503/ Installing street ironwork in the workplace J/506/ Preparing and operating forward tipping dumpers to receive, transport and discharge materials in the workplace 331 R/506/ Preparing and operating ride-on rollers to compact materials in the workplace 352 F/506/ Preparing for, and arranging and securing plant or machinery for transportation in the workplace 358 A/506/ Preparing to and directing and guiding the movement of vehicles, plant or machinery in the workplace 362 R/506/ Slinging and hand signalling the movement of suspended loads in the workplace 366 F/506/ Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace 681 K/503/ Providing temporary excavation support in the workplace City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

16 682 H/503/ Reinstating excavation and highway surfaces in the workplace A/600/ Reinstating ground condition in the workplace To achieve the Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Drainage ( ), you must achieve 31 credits from the mandatory units and a minimum of 10 credits from the optional units available. Additional units may be achieved from the elective units, but they will not count towards the qualification. Unit no. UAN Mandatory Unit level Unit title 101 A/503/ Conforming to general health, safety and welfare in the workplace 218 J/503/ Conforming to productive working practices in the workplace 370 J/506/ Setting out secondary dimensional work control in the workplace Credit value 2 7 GLH Y/504/ Installing drainage in the workplace Optional 239 T/503/ Establishing work area protection and safety in the workplace 698 K/503/ Segregating the area for highways works in the workplace Elective 224 D/600/ Erecting and dismantling access/working platforms in the workplace M/503/ Installing street ironwork in the workplace J/506/ Preparing and operating forward tipping dumpers to receive, transport and discharge materials in the workplace 331 R/506/ Preparing and operating ride-on rollers to compact materials in the workplace 352 F/506/ Preparing for, and arranging and securing plant or machinery for transportation in the workplace 358 A/506/ Preparing to and directing and guiding the movement of vehicles, plant or machinery in the workplace 362 R/506/ Slinging and hand signalling the movement of suspended loads in the workplace 366 F/506/ Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace 608 F/503/ Moving, handling and storing resources in the workplace 681 K/503/ Providing temporary excavation support in the workplace City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566) 16

17 682 H/503/ Reinstating excavation and highway surfaces in the workplace 730 A/600/ Reinstating ground condition in the workplace To achieve the Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Excavation and Reinstatement ( ), you must achieve 39 credits from the mandatory units and a minimum of 10 credits from the optional units available. Additional units may be achieved from the elective units, but they will not count towards the qualification. Unit no. UAN Mandatory Unit level Unit title 101 A/503/ Conforming to general health, safety and welfare in the workplace 218 J/503/ Conforming to productive working practices in the workplace 240 Y/503/ Excavating holes and trenches - manual digging in the workplace 297 A/503/ Locating and protecting utilities apparatus and sub-structures in the workplace 682 H/503/ Reinstating excavation and highway surfaces in the workplace Optional 239 T/503/ Establishing work area protection and safety in the workplace 698 K/503/ Segregating the area for highways works in the workplace Elective 224 D/600/ Erecting and dismantling access/working platforms in the workplace Credit value 2 7 GLH M/503/ Installing street ironwork in the workplace J/506/ Preparing and operating forward tipping dumpers to receive, transport and discharge materials in the workplace 331 R/506/ Preparing and operating ride-on rollers to compact materials in the workplace 352 F/506/ Preparing for, and arranging and securing plant or machinery for transportation in the workplace 358 A/506/ Preparing to and directing and guiding the movement of vehicles, plant or machinery in the workplace 362 R/506/ Slinging and hand signalling the movement of suspended loads in the workplace 366 F/506/ Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

18 608 F/503/ Moving, handling and storing resources in the workplace 681 K/503/ Providing temporary excavation support in the workplace 730 A/600/ Reinstating ground condition in the workplace To achieve the Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Flexible Pavement ( ), you must achieve 31 credits from the mandatory units and a minimum of 10 credits from the optional units available. Additional units may be achieved from the elective units, but they will not count towards the qualification. Unit no. UAN Mandatory Unit level Unit title 101 A/503/ Conforming to general health, safety and welfare in the workplace 218 J/503/ Conforming to productive working practices in the workplace 292 Y/503/ Laying flexible pavements in the workplace 370 J/506/ Setting out secondary dimensional work control in the workplace 608 F/503/ Moving, handling and storing resources in the workplace Optional 239 T/503/ Establishing work area protection and safety in the workplace 698 K/503/ Segregating the area for highways works in the workplace Elective 224 D/600/ Erecting and dismantling access/working platforms in the workplace Credit value 2 7 GLH M/503/ Installing street ironwork in the workplace J/506/ Preparing and operating forward tipping dumpers to receive, transport and discharge materials in the workplace 331 R/506/ Preparing and operating ride-on rollers to compact materials in the workplace 352 F/506/ Preparing for, and arranging and securing plant or machinery for transportation in the workplace 358 A/506/ Preparing to and directing and guiding the movement of vehicles, plant or machinery in the workplace 362 R/506/ Slinging and hand signalling the movement of suspended loads in the workplace City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566) 18

19 366 F/506/ Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace 681 K/503/ Providing temporary excavation support in the workplace 682 H/503/ Reinstating excavation and highway surfaces in the workplace 730 A/600/ Reinstating ground condition in the workplace To achieve the Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Structural Concreting ( ), you must achieve 45 credits from the mandatory units and a minimum of 10 credits from the optional units available. Additional units may be achieved from the elective units, but they will not count towards the qualification. Unit no. UAN Mandatory Unit level Unit title 101 A/503/ Conforming to general health, safety and welfare in the workplace 218 J/503/ Conforming to productive working practices in the workplace 608 F/503/ Moving, handling and storing resources in the workplace 731 M/503/ Pouring concrete to form structures in the workplace 732 R/503/ Erecting and striking proprietary formwork in the workplace Optional 239 T/503/ Establishing work area protection and safety in the workplace 698 K/503/ Segregating the area for highways works in the workplace Elective 224 D/600/ Erecting and dismantling access/working platforms in the workplace Credit value 2 7 GLH M/503/ Installing street ironwork in the workplace J/506/ Preparing and operating forward tipping dumpers to receive, transport and discharge materials in the workplace 331 R/506/ Preparing and operating ride-on rollers to compact materials in the workplace 352 F/506/ Preparing for, and arranging and securing plant or machinery for transportation in the workplace 358 A/506/ Preparing to and directing and guiding the movement of vehicles, plant or machinery in the workplace 362 R/506/ Slinging and hand signalling the movement of suspended loads in the workplace City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

20 366 F/506/ Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace 681 K/503/ Providing temporary excavation support in the workplace 682 H/503/ Reinstating excavation and highway surfaces in the workplace A/600/ Reinstating ground condition in the workplace To achieve the Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Non-structural Concreting ( ), you must achieve 31 credits from the mandatory units and a minimum of 10 credits from the optional units available. Additional units may be achieved from the elective units, but they will not count towards the qualification. Unit no. UAN Mandatory Unit level Unit title 101 A/503/ Conforming to general health, safety and welfare in the workplace 218 J/503/ Conforming to productive working practices in the workplace 608 F/503/ Moving, handling and storing resources in the workplace 640 R/504/6774 Placing and finishing non-specialist concrete in the workplace Optional 239 T/503/ Establishing work area protection and safety in the workplace 698 K/503/ Segregating the area for highways works in the workplace Elective 224 D/600/ Erecting and dismantling access/working platforms in the workplace Credit value 2 7 GLH M/503/ Installing street ironwork in the workplace J/506/ Preparing and operating forward tipping dumpers to receive, transport and discharge materials in the workplace 331 R/506/ Preparing and operating ride-on rollers to compact materials in the workplace 352 F/506/ Preparing for, and arranging and securing plant or machinery for transportation in the workplace 358 A/506/ Preparing to and directing and guiding the movement of vehicles, plant or machinery in the workplace 362 R/506/ Slinging and hand signalling the movement of suspended loads in the workplace City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566) 20

21 366 F/506/ Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace 681 K/503/ Providing temporary excavation support in the workplace 682 H/503/ Reinstating excavation and highway surfaces in the workplace 730 A/600/ Reinstating ground condition in the workplace To achieve the Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Laying Kerbs and Channels ( ), you must achieve 31 credits from the mandatory units and a minimum of 10 credits from the optional units available. Additional units may be achieved from the elective units, but they will not count towards the qualification. Unit no. UAN Mandatory Unit level Unit title 101 A/503/ Conforming to general health, safety and welfare in the workplace 218 J/503/ Conforming to productive working practices in the workplace 370 J/506/ Setting out secondary dimensional work control in the workplace 608 F/503/ Moving, handling and storing resources in the workplace 733 D/503/ Laying kerbs and channels in the workplace Optional 239 T/503/ Establishing work area protection and safety in the workplace 698 K/503/ Segregating the area for highways works in the workplace Elective 224 D/600/ Erecting and dismantling access/working platforms in the workplace Credit value 2 7 GLH M/503/ Installing street ironwork in the workplace J/506/ Preparing and operating forward tipping dumpers to receive, transport and discharge materials in the workplace 331 R/506/ Preparing and operating ride-on rollers to compact materials in the workplace 352 F/506/ Preparing for, and arranging and securing plant or machinery for transportation in the workplace 358 A/506/ Preparing to and directing and guiding the movement of vehicles, plant or machinery in the workplace City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

22 362 R/506/ Slinging and hand signalling the movement of suspended loads in the workplace 366 F/506/ Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace 681 K/503/ Providing temporary excavation support in the workplace 682 H/503/ Reinstating excavation and highway surfaces in the workplace 730 A/600/ Reinstating ground condition in the workplace To achieve the Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance General Building Operations ( ), you must achieve 40 credits from the mandatory units and a minimum of 10 credits from the optional units available. Additional units may be achieved from the elective units, but they will not count towards the qualification. Unit no. UAN Mandatory Unit level Unit title 101 A/503/ Conforming to general health, safety and welfare in the workplace 218 J/503/ Conforming to productive working practices in the workplace 294 J/503/ Laying modular pavement in the workplace 370 J/506/ Setting out secondary dimensional work control in the workplace 733 D/503/ Laying kerbs and channels in the workplace Optional 239 T/503/ Establishing work area protection and safety in the workplace 698 K/503/ Segregating the area for highways works in the workplace Elective 224 D/600/ Erecting and dismantling access/working platforms in the workplace Credit value 2 7 GLH M/503/ Installing street ironwork in the workplace J/506/ Preparing and operating forward tipping dumpers to receive, transport and discharge materials in the workplace 331 R/506/ Preparing and operating ride-on rollers to compact materials in the workplace 352 F/506/ Preparing for, and arranging and securing plant or machinery for transportation in the workplace City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566) 22

23 358 A/506/ Preparing to and directing and guiding the movement of vehicles, plant or machinery in the workplace 362 R/506/ Slinging and hand signalling the movement of suspended loads in the workplace 366 F/506/ Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace 608 F/503/ Moving, handling and storing resources in the workplace 681 K/503/ Providing temporary excavation support in the workplace 682 H/503/ Reinstating excavation and highway surfaces in the workplace 730 A/600/ Reinstating ground condition in the workplace City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

24 5.3 Skill scan/initial assessment Mandatory units Qualification title: Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance (6566) Qualification No: 6566 Candidate name: Unit Duties Examples Training Required 101 Conforming to general health, safety and welfare in the workplace Comply with all workplace health, safety and welfare legislation requirements. Recognise hazards associated with the workplace that have not been previously controlled and report them in accordance with organisational procedures. Comply with organisational policies and procedures to contribute to health, safety and welfare. Work responsibly to contribute to workplace health, safety and welfare whilst carrying out work in the relevant occupational area. Comply with and support all organisational security arrangements and approved procedures. 218 Conforming to productive working practices in the workplace Communicate with others to establish productive work practices Follow organisational procedures to plan the sequence of work. Maintain relevant records in accordance with the organisational procedures Maintain good working relationships when conforming to productive working practices. City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566) 24

25 240 Excavating holes and trenches - manual digging in the workplace Interpret the given information relating to the work and resources when excavating holes and trenches by manual digging. Know how to comply with relevant legislation and official guidance when excavating holes and trenches by manual digging. Maintain safe and healthy working practices when excavating holes and trenches by manual digging. Select the required quantity and quality of resources for the methods of work to excavate holes and trenches by manual digging. Minimise the risk of damage to the work and surrounding area when excavating holes and trenches by manual digging. Complete the work within the allocated time when excavating holes and trenches by manual digging. Comply with the given contract information to excavate holes and trenches by manual digging to the required specification. 292 Laying flexible pavements in the workplace Interpret the given information relating to the work and resources when laying flexible pavements. Know how to comply with relevant legislation and official guidance when laying flexible pavements. Maintain safe and healthy working practices when laying flexible pavements. Select the required quantity and quality of resources for the methods of work to lay flexible pavements. Minimise the risk of damage to the work and surrounding area when laying flexible pavements. Complete the work within the allocated time when laying flexible pavements. Comply with the given contract information to lay flexible pavements to the required specification. 25 City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

26 294 Laying modular pavement in the workplace Interpret the given information relating to the work and resources when laying modular pavement. Know how to comply with relevant legislation and official guidance when laying modular pavement. Maintain safe and healthy working practices when laying modular pavement. Select the required quantity and quality of resources for the methods of work to lay modular pavement. Minimise the risk of damage to the work and surrounding area when laying modular pavement. Complete the work within the allocated time when laying modular pavement. Comply with the given contract information to lay modular pavement to the required specification. 297 Locating and protecting utilities apparatus and sub-structures in the workplace Interpret the given information relating to the work and resources when locating and protecting utilities apparatus and sub-structures. Know how to comply with relevant legislation and official guidance when locating and protecting utilities apparatus and sub-structures. Maintain safe and healthy working practices when locating and protecting utilities apparatus and substructures. Select the required quantity and quality of resources for the methods of work to locate and protect utilities apparatus and sub-structures. Minimise the risk of damage to the work and surrounding area when locating and protecting utilities apparatus and sub-structures. Complete the work within the allocated time when locating and protecting utilities apparatus and substructures. City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566) 26

27 Comply with the given contract information to locate and protect utilities apparatus and sub-structures to the required specification. 370 Setting out secondary dimensional work control in the workplace Interpret the given information relating to setting out dimensional control of the work Know how to comply with relevant legislation and official guidance to set out dimensional control of the work. Maintain safe and healthy working practices when setting out dimensional control of the work. Select the required quantity and quality of resources to set out dimensional control of the work. Minimise the risk of damage to the work and surrounding area when setting out dimensional control of the work. Complete the work within the allocated time when setting out dimensional control of the work. Comply with the given contract information to set out dimensional control of the work to the required specification. 608 Moving, handling and storing resources in the workplace Comply with given information when moving, handling and/or storing resources. Know how to comply with relevant legislation and official guidance when moving, handling and/or storing resources. Maintain safe working practices when moving, handling and/or storing resources. Select the required quantity and quality of resources for the methods of work to move, handle and/or store occupational resources. Prevent the risk of damage to occupational resources and surrounding environment when moving, handling and/or storing resources. Complete the work within the allocated time when moving, handling and/or storing resources. 27 City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

28 Comply with the given occupational resource information to move, handle and/or store resources to the required guidance. 640 Placing and finishing nonspecialist concrete in the workplace Interpret the given information relating to the work and resources when placing and finishing nonspecialist concrete. Know how to comply with relevant legislation and official guidance when placing and finishing non-specialist concrete. Maintain safe and healthy working practices when placing and finishing non-specialist concrete. Select the required quantity and quality of resources the methods of work to place and finish non-specialist concrete. Minimise the risk of damage to the work and surrounding area w when placing and finishing non-specialist concrete. Complete the work within the allocated time when placing and finishing non-specialist concrete. Comply with the given contract information to place and finish nonspecialist concrete to the required specification. 682 Reinstating excavation and highway surfaces in the workplace Interpret the given information relating to the work and resources when reinstating excavation and highway surfaces. Know how to comply with relevant legislation and official guidance when reinstating excavation and highway surfaces. Maintain safe and healthy working practices when reinstating excavation and highway surfaces. Select the required quantity and quality of resources for the methods of work to reinstate excavation and highway surfaces. Minimise the risk of damage to the work and surrounding area when reinstating excavation and highway surfaces. City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566) 28

29 Complete the work within the allocated time when reinstating excavation and highway surfaces. Comply with the given contract information to reinstate excavation and highway surfaces to the required specification. 731 Pouring concrete to form structures in the workplace Interpret the given information relating to the work and resources when pouring concrete to form structures. Know how to comply with relevant legislation and official guidance when pouring concrete to form structures. Maintain safe and healthy working practices when pouring concrete to form structures. Select the required quantity and quality of resources for the methods of work to pour concrete to form structures. Minimise the risk of damage to the work and surrounding area when pouring concrete to form structures. Complete the work within the allocated time when pouring concrete to form structures. Comply with the given contract information to pour concrete to form structures to the required specification. 732 Erecting and striking proprietary formwork in the workplace Interpret the given information relating to the work and resources when erecting and striking proprietary formwork. Know how to comply with relevant legislation and official guidance when erecting and striking proprietary formwork. Maintain safe and healthy working practices when erecting and striking proprietary formwork. Select the required quantity and quality of resources for the methods of work to erect and strike proprietary formwork. 29 City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

30 Minimise the risk of damage to the work and surrounding area when erecting and striking proprietary formwork. Complete the work within the allocated time when erecting and striking proprietary formwork. Comply with the given contract information to erect and strike proprietary formwork to the required specification. 733 Laying kerbs and channels in the workplace Interpret the given information relating to the work and resources when laying kerbs and channels. Know how to comply with relevant legislation and official guidance when laying kerbs and channels. Maintain safe and healthy working practices when laying kerbs and channels. Select the required quantity and quality of resources for the methods of work to lay kerbs and channels. Minimise the risk of damage to the work and surrounding area when laying kerbs and channels. Complete the work within the allocated time when laying kerbs and channels. Comply with the given contract information to lay kerbs and channels to the required specification. 740 Installing drainage in the workplace Interpret the given information relating to the work and resources when installing drainage Know how to comply with relevant legislation and official guidance when installing drainage Maintain safe and healthy working practices when installing drainage Select the required quantity and quality of resources for the methods of work to when installing drainage Minimise the risk of damage to the work and surrounding area when installing drainage Complete the work within the allocated time when installing drainage City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566) 30

31 Comply with the given contract information to erect and strike proprietary formwork to the required specification 31 City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)

32 5.4 Tracking Document To achieve the Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Modular Pavement ( ), you must achieve 31 credits from the mandatory units and a minimum of 10 credits from the optional units available. Additional units may be achieved from the elective units but they will not count towards the qualification. City & Guilds unit no. Unit level Unit title Mandatory units Conforming to general health, safety and welfare in the workplace Conforming to productive working practices in the workplace Laying modular pavement in the workplace Setting out secondary dimensional work control in the workplace Moving, handling and storing resources in the workplace Optional units Establishing work area protection and safety in the workplace Segregating the area for highways works in the workplace Elective units Erecting and dismantling access/working platforms in the workplace Installing street ironwork in the workplace Preparing and operating forward tipping dumpers to receive, transport and discharge materials in the workplace Preparing and operating ride-on rollers to compact materials in the workplace Preparing for, and arranging and securing plant or machinery for transportation in the workplace Preparing to and directing and guiding the movement of vehicles, plant or machinery in the workplace Slinging and hand signalling the movement of suspended loads in the workplace Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace Providing temporary excavation support in the workplace Reinstating excavation and highway surfaces in the workplace Credits Unit achieved Yes/No Date City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566) 32

33 730 2 Reinstating ground condition in the workplace 12 To achieve the Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services (Construction) - Highways Maintenance Drainage ( ), you must achieve 31 credits from the mandatory units and a minimum of 10 credits from the optional units available. Additional units may be achieved from the elective units, but they will not count towards the qualification. City & Guilds unit no. Unit level Mandatory units Unit title Conforming to general health, safety and welfare in the workplace Conforming to productive working practices in the workplace Setting out secondary dimensional work control in the workplace Installing drainage in the workplace 19 Optional units Establishing work area protection and safety in the workplace Segregating the area for highways works in the workplace Elective units Erecting and dismantling access/working platforms in the workplace Installing street ironwork in the workplace Preparing and operating forward tipping dumpers to receive, transport and discharge materials in the workplace Preparing and operating ride-on rollers to compact materials in the workplace Preparing for, and arranging and securing plant or machinery for transportation in the workplace Preparing to and directing and guiding the movement of vehicles, plant or machinery in the workplace Slinging and hand signalling the movement of suspended loads in the workplace Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace Moving, handling and storing resources in the workplace Providing temporary excavation support in the workplace Credits Unit achieved Yes/No Date 33 City & Guilds L2 NVQ Diploma in Construction Ops and Civil Engineering Svcs - Highways Maintenance (6566)