GOLDEN APARTMENTS COMPLETE RENOVATION PROJECT 2312 N. Golden Ave San Bernardino, CA SUPPLEMENT TO: PLUMBING SPECIFICATIONS

Transcription

1 GOLDEN APARTMENTS COMPLETE RENOVATION PROJECT 2312 N. Golden Ave San Bernardino, CA SUPPLEMENT TO: PLUMBING SPECIFICATIONS 22 Plumbing o Re-Pipe PEX o Fixtures Kitchen Kitchen sink -33x22 Double bowl, drop-in, self-rimming, 8"deep, three hole, stainless steel. HDS# Kitchen sink faucets to be Delta Single Handle #100LFWF (no spray hose). ADA NO SUBSTITUTIONS Sink Faucet Delta aerator flow must be less than 1.5 GPM InSink Erator Badger 500 1/2HP with cord Garbage Disposal Bath Lavatory Sink Kohler Bryant 20 1/8 x 16 ½ oval white drop-in #K ADA Lavatory Sinks American Standard Lucerne Wall-Hung Lavatory White 4 center hole # Must support minimum of 400lbs. Lav Bath Faucets to be Delta Single Handle #523LFHDF ADA New Angle Stops shall be "1/4 turn" ball valve style New shower valves to be Delta #R10000-UNWS. Shower head not to exceed 1.5 GPM Toilet 1.28 GPF. ADA American Standard Cadet PRO ELONGATED WHITE Shower doors - Deluxe bi-pass doors with chrome finish & textured glass. HD # or equivalent. o Water Heater TBD o Hose bibs shall be 1/4 turn, ball valve style w/key. o Laundry room needs floor drain. o All laundry wall drain pipe to be 2" ABS.

2 BARRIER FREE LUCERNE -HUNG LAVATORY Wall-hung sink Vitreous china Front overflow D-shaped bowl Self-draining deck area with contoured back and side splash shields Faucet ledge Faucet holes on 203mm (8") centers (Illus.): For exposed bracket support Shown with Amarilis Heritage faucet with Triune Cross handles (not included) For wall hanger (included) or For wall hanger (included) or Extra right-hand hole For wall hanger (included) or Extra left-hand hole Faucet holes on 102mm (4") centers: For exposed bracket support For wall hanger (included) or For wall hanger (included) or Extra right-hand hole For wall hanger (included) or Extra left-hand hole Single center faucet hole (Illus.): For exposed bracket support Shown with metering faucet (not included) For wall hanger (included) or For wall hanger (included) or Extra right-hand hole For wall hanger (included) or Extra left-hand hole Nominal Dimensions: 521 x 464mm (20-1/2" x 18-1/4") Bowl sizes: 381mm (15") wide 254mm (10") front to back 165mm (6-1/2") deep LUCERNE -HUNG LAVATORY VITREOUS CHINA SEE REVERSE FOR ROUGHING-IN DIMENSIONS To Be Specified: Color: White Bone Silver Black Linen Faucet*: Faucet Finish: Supplies: 1-1/4" Trap: Nipple: Bracket Support (by others): Concealed Arms Support (by others): * See faucet section for additional models available Compliance Certifications - Meets or Exceeds the Following Specifications: ASME A for Vitreous China Fixtures MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE- LINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES. Top of front rim mounted 864mm (34") from finished floor. M AS America Inc. Revised 2/08

3 BARRIER FREE " CTRS FOR HANGER OR LUCERNE -HUNG LAVATORY VITREOUS CHINA " CTRS FOR HANGER OR EXTRA RIGHT HAND HOLE 54mm 25mm (1") DIA. 4 25mm (1") DIA mm (3/8) 2 *(11-1/4) mm (3/8) 2 *(11-1/4) " CTRS FOR HANGER OR EXTRA LEFT HAND HOLE 54mm NOTES: * DIMENSIONS SHOWN FOR LOCATION OF AND P TRAP ARE SUGGESTED. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. CONCEALED ARM SUPPORT TO BE FURNISHED BY OTHERS. 25mm (1") DIA. 4 IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. LAVATORY DESIGNED TO MEET ADA HANDICAPPED GUIDELINES WITH MOUNTING HEIGHT SET AT 864MM (34") ABOVE. 3 10mm (3/8) 2 *(11-1/4) AS America Inc. M20 Revised 8/05

4 BARRIER FREE " CTRS FOR HANGER OR LUCERNE -HUNG LAVATORY VITREOUS CHINA " CTRS FOR HANGER OR EXTRA RIGHT HAND HOLE 54 mm 25mm (1") DIA. 4 25mm (1") DIA mm (3/8) mm *(10-1/4) 3 10mm (3/8) mm *(10-1/4) " CTRS FOR HANGER OR EXTRA LEFT HAND HOLE 54 mm NOTES: * DIMENSIONS SHOWN FOR LOCATION OF AND P TRAP ARE SUGGESTED. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. CONCEALED ARM SUPPORT TO BE FURNISHED BY OTHERS. 25mm (1") DIA. 4 IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. LAVATORY DESIGNED TO MEET ADA HANDICAPPED GUIDELINES WITH MOUNTING HEIGHT SET AT 864MM (34") ABOVE. 3 10mm (3/8) mm *(10-1/4) M AS America Inc. Revised 8/05

5 BARRIER FREE SINGLE CENTER HOLE FOR HANGER OR 44mm DIA. STD. OUTLET 25mm (1-3/8) DIA. PUNCHING LUCERNE -HUNG LAVATORY VITREOUS CHINA SINGLE CENTER HOLE FOR HANGER OR WITH EXTRA RIGHT HAND HOLE 44mm DIA. STD. OUTLET 25mm (1-3/8) DIA. PUNCHING 54 mm 25mm (1") DIA. 25mm (1") DIA mm (3/8) 3 10mm (3/8) SINGLE CENTER HOLE FOR HANGER OR WITH EXTRA LEFT HAND HOLE 44mm DIA. STD. OUTLET 25mm (1-3/8) DIA. PUNCHING 54 mm NOTES: * DIMENSIONS SHOWN FOR LOCATION OF AND P TRAP ARE SUGGESTED. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. CONCEALED ARM SUPPORT TO BE FURNISHED BY OTHERS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. 25mm (1") DIA. 4 LAVATORY DESIGNED TO MEET ADA HANDICAPPED GUIDELINES WITH MOUNTING HEIGHT SET AT 864MM (34") ABOVE. 3 10mm (3/8) M AS America Inc. Revised 9/04

6 Features With overflow. 4" () centers. 20-1/8" (511 cm) x 16-1/2" (419 cm) Material Vitreous china. Installation Drop-in Recommended Accessories K Decorative Drain K Decorative Drain K Drain K P-Trap CSA B651 Codes/Standards ASME A /CSA B45.1 ADA ICC/ANSI A117.1 CSA B651 Bryant Bathroom Sink K KOHLER One-Year Limited Warranty See website for detailed warranty information. Available Color/Finishes Color tiles intended for reference only. Color Code NY 95 G9 33 K Description White Biscuit Almond Dune Ice Grey Sandbar Mexican Sand Cashmere Thunder Grey Black Black USA/Canada: KOHLER ( ) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to :38

7 Bryant Bathroom Sink K /2" Technical Information All product dimensions are nominal. Installation: Drop-In Bowl area Length: 17-3/8" (441 mm) Width: 11-1/8" (283 mm) Water depth: 5-5/8" (143 mm) Number of deck holes: 3 Faucet hole(s): 1-1/4" (32 mm) Drain hole: 7/8" (22 mm) Template: Drop-in, , required, included Notes Install this product according to the installation guide. Spout must be 5" (12.7 cm) long (min) for adequate clearance into the lavatory when installed with the centerline as shown. Spout must be tall enough to clear 3" (7.6 cm) rim height and provide a 1" (2.5 cm) air gap per ASME A NOTICE: Countertop manufacturer or cutter must use the cut-out template provided with the product, or a current one provided by Kohler Co. (call KOHLER). Kohler Co. is not responsible for cutout errors when the incorrect cut-out template is used. ADA, CSA B651 compliant when installed to the specific requirements of these regulations. USA/Canada: KOHLER ( ) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to :38

8 501LF-HDF 501LF-HGMHDF 501LF-TGMHDF Submitted Model No.: Specific Features: 4" Centers () 6 1/2" () 520LF-HDF 520LF-HGMHDF 520LF-TGMHDF 5" (127 mm) 5 5/16" (135 mm) 1 13/16" (46 mm) 6 13/32" (163 mm) 523LF-HDF 523LF-HGMHDF 523LF-TGMHDF 5" (127 mm) Min. 2 1/2" (64 mm) Clearance to Back Splash 2" (51 mm) Max. Deck Thickness 6 9/16" (167 mm) Min. 1 1/2" (3) Hole Size lavatory FAUCETS Single Handle 3 Hole Sink Applications 4" () Centerset STANDARD SPECIFICATIONS: Single handle lavatory deck faucets for exposed mounting on three hole sinks. 4" () centerset. All metal fabricated body. 5" (127 mm) spout. Vandal resistant aerator or spray outlet. Metal grid strainer (523). Metal pop-up drain (520). Lift rod hole (520). Vandal resistant lever handle. Red/blue colored graphics indicate hot/cold temperature. Control mechanism is the diamond embedded ceramic disc cartridge. Control handle shall return to the neutral position when valve is turned off. Adjustable handle limit stop. 3/8" O.D. straight, staggered copper supply tubes with 3/8" fittings. Available options for field conversion: 6" () long elbow handle-red/blue colored graphics indicate hot/cold temperature. Order RP Maximum 1.5 gpm 60 PSI. HGM (models only) max. 0.5 gpm 60 PSI. TGM (models only) max gpm 60 PSI. Warranty Lifetime Faucet and Finish Limited Warranty to the original consumer purchaser to be free from defects in material and workmanship. 5 Year Limited Warranty for usage in all industrial, commercial and business applications. Metal Grid Strainer Metal Pop-Up U P C 8" () Designate proper finish suffix 2 1/8" (54 mm) 1 5/8" (42 mm) to 2 3/8" (61 mm) 1 3/8" (35 mm) 1 1/4" (32 mm) 3 3/8" () 4 5/8" (117 mm) 2 1/8" (54 mm) 1 5/8" (41 mm) to 2 3/8" (60 mm) 1 3/8" (35 mm) 1 1/4" (32 mm) COMPLIES WITH: ASME A / CSA B125.1 ASME A / CSA B125.2 Indicates compliance to ICC/ANSI A117.1 EPA WaterSense Verified compliant with.25% weighted average Pb content regulations. Flow (U.S. Gallons Per Minute) Pressure (kpa) HGM Models Only TGM Models Only Pressure (PSI) Flow (Liters Per Minute) Delta reserves the right to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or for finish options and product availability. DSP-L-501LF-HDF Rev. C 55 E. 111th Street, Indianapolis, Indiana South Edgeware Road, St. Thomas, ON N5P 4L Masco Corporation of Indiana

9 100LF-WF 400LF-WF Submitted Model No.: Specific Features: KITCHEN FAUCETS Classic Series Single Handle Deck Mount 3 and 4 Hole Sink Applications A 8 3/4 (221 mm) Max. 4 () -6 () -8 () 360 Swing Spout 1 () Max. Deck Thickness CL 2 1/16 (52 mm) 1 3/16 (30 mm) 3/8 (10 mm) 7 13/16 (19) 4 3/4 (121 mm) 1 1/4 (32 mm) Max. Deck Thickness 3/8 (10 mm) Tubes 10 (254 mm) Long 2 (51 mm) 7/8 (22 mm) STANDARD SPECIFICATIONS: Maximum flow rate PSI, kpa. Solid brass fabricated body. Standard 8" () long spout swings 360. Control handle shall return to neutral position when faucet is turned off. Lever handle. Control mechanism shall be of the rotating stainless steel ball type with replaceable non-metallic seats operating in stainless steel lined sockets. Model 400 series with spray attachement has antisiphon device as integral part of valve body. Model 100 and 400 series without dispenser can be field converted from 8" () to 6" () centers. 3/8" O.D. copper tube inlets - 10" (854 mm) long. Vegetable sprayer hose with chrome sprayhead on model 400 series - 45" (1143 mm) long threaded hose. Models supplied with 1/2"-14 NPSM adapters. 8 () Centers 1/2-14 NPSM - Adapter Suffix WF Models Only Dimension A 1 7/8" (4) -4" () Spout (RP5881) 3 1/2" (89 mm) -6" () Spout (RP9633) 5" (127 mm) -8" () Spout (Standard) WARRANTY Lifetime limited warranty on parts (other than electronic parts and batteries) and inishes; or, for commercial users, for 5 years from the date of purchase. 5 year limited warranty on electronic parts (other than batteries); or for commercial users, for 1 year from the date of purchase. No warranty is provided on batteries. COMPLIES WITH: ASME A / CSA B125.1 Indicates compliance to ICC/ANSI A117.1 Verified compliant with.25% weighted average Pb content regulations. Delta reserves the right to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or for finish options and product availability. DSP-K-100LF-WF Rev. C 55 E. 111th Street, Indianapolis, Indiana South Edgeware Road, St. Thomas, Ontario Canada N5P 4L Masco Corporation of Indiana

10 CADET PRO ELONGATED TOILET VITREOUS CHINA CADET PRO ELONGATED TOILET 215CA.104 Features the Cadet Flushing System Vitreous china High Efficiency Toilet (HET), ultra-low consumption (4.8 Lpf/1.28 gpf), utilizes 20% less water Meets EPA WaterSense criteria Trade exclusive tank PowerWash rim scrubs bowl with each flush Robust metal trip lever & metal shank fill valve Includes EZ-Install Tools w/color match bowl caps EverClean surface included 3" flush valve Fully-glazed 2-1/8" trapway 12" (305mm) rough-in Generous 9" x 8" water surface area Chrome finish trip lever is supplied 1,000g MaP Score** at 1.28 gpf 5 year warranty 3517C.101 Elongated Bowl 4188A.104 Tank Nominal Dimensions: 767 x 441 x 733mm (30-1/8" x 17-3/8" x 28-7/8") Fixture only, seat and supply sold separately Alternative Tank Configurations Available: 4188A.154 Tank complete with Aquaguard Liner 4188A.155 Tank complete with Aquaguard Liner and trip lever located on right side 4188A.164 Tank complete with tank cover locking device 4188A.174 Tank complete with Aquaguard Liner and tank cover locking device 4188A.105 Tank complete with trip lever located on right side 4188A.165 Tank complete with tank cover locking device and trip lever located on right side Compliance Certifications - Meets or Exceeds the Following Specifications: ASME A /CSA B for Vitreous China Fixtures US EPA WaterSense Specification for HETs ** Maximum Performance (MaP) testing performed by IAPMO R&T Lab. MaP Report conducted by Veritec Consulting, Inc. and Koeller and Company. 1-1/16" (27mm) 3-5/8" (92mm) 8-7/8" (226mm) 7-7/16" (189mm) 12" (305mm) 30-1/8" (767mm) 18-1/2" (470mm) C/L OF SEAT POST HOLES 140mm (5-1/2" CENTERS) 13-5/8" (347mm) C/L OF OUTLET 15" (381mm) 28-7/8" (733mm) SUPPLY AS REQ'D *8" (203mm) 6" (152mm) 17-3/8" (441mm) 14" (356mm) 9-5/8" (244mm) NOTES: THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. * DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. To Be Specified: Color: White Bone Linen Black Seat: # EverClean Elongated Seat with Slow Close Snap-Off Hinges Supply with stop: Certified by IAPMO R&T K AS America Inc. Rev. 5/13