SECTION E INDEX CURTAINWALL FRAMING SYSTEMS

Transcription

1 SECTION E INDEX CURTAINWALL FRAMING SYSTEMS E PAGE DESCRIPTION 0 CURTAINWALL FRAMING SPECIFICATION 0 SERIES /" () WIDE THERMALLY IMPROVED CURTAIN WALL FRAMING SYSTEM FOR SEALED UNIT GLAZING. 00 SERIES /" () WIDE THERMALLY IMPROVED CURTAIN WALL FRAMING SYSTEM FOR SEALED UNIT GLAZING. 00 SERIES SSG (STRUCTURAL SILICONE GLAZING) /" () WIDE CURTAIN WALL FRAMING SYSTEM SUNSHADES

2 CURTAIN WALL FRAMING SPECIFICATION E Part - GENERAL Description Work included: Furnish materials, labour and equipment for the complete installation of aluminum entrance and window frames as detailed on the drawings and specified herein. Work not included: See Specifier list. Structural support of framing, interior building trims. Related work specified elsewhere: See Specifier list Quality Assurance Drawings and specifications for work in this section are based upon DESA series framing system. (select type: or 00 series). Whenever alternative products are to be considered, submit supporting technical literature and samples for review and comparison by Consultant 0 days prior to closing date. Performance Framing system to fully comply with CAN/CSA-A0, Windows. Air infiltration shall meet the FIXED rating. Water infiltration shall meet the required (select up to B7) rating. Intermediate mullions and horizontals shall be designed to withstand loading in accordance with the National Building Code of Canada and/or the Alberta Building Code. Condensation resistance temperature index of the framing shall be a minimum of.. Maintenance and Guarantee Provide maintenance and cleaning data in accordance with instructions under General Conditions. Provide a written guarantee from substantial completion for a period of one year on the complete installation of materials and workmanship provided under this section. Part - PRODUCTS Materials Extrusions shall be 0 T alloy and temper, formed aluminum components shall be of suitable alloy and strength to suit their purpose and function. Fasteners shall be made of corrosion-resistant and compatible materials and of sufficient size and strength to perform their intended function. Glazing gaskets shall be extruded black, santoprene of durometer appropriate to perform their intended function. Insulated back pans in column or spandrel areas shall be galvanized steel of 0 gauge thickness (or as specified to suit application) and have sealed corners. Insulation shall be AF0 (8kg/m ( lb.) density) fibreglass mm (") thick (or as specified to suit application). Securing of insulation into back-up panel shall be by impaling insulation onto welded pins with retaining discs. Any connections between the back-up panels and framing shall be caulked with high grade butyl sealant. Selected framing system shall be: - series /" () wide thermally improved curtain wall framing for sealed unit glazing. -00 series /" () wide thermally improved curtain wall framing for sealed unit glazing Both systems offer vented horizontal mullion glazing pockets achieving full rain screen capabilities. Fabrication Construct framing from tubular extruded sections of size and shape as shown on shop drawings. All framing joints shall be accurately cut, machined and sealed to allow neat watertight connections and be designed for shear block joinery with all extrusions. Vertical expansion joints shall be sleeved and sealed at meeting mullion ends. All structural anchors shall have way adjustment with welding completed after curtain wall is aligned. All horizontal members shall be sealed to vertical members to provide individual compartments within the system in accordance with the rain screen principle and must form individually pressure equalized and sealed cells. Finish All exposed surfaces shall be free of scratches and defects. Aluminum extrusions shall be finished as selected by Specifier. Standard Clear Anodizing: AA-MCA Standard Bronze Anodizing: AA-MCA Standard Black Anodizing: AA-MCA Duracron Acrylic Enamel: AAMA 0 Duranar Fluoropolymer paint: AAMA 0 Various Bronze Anodizing colours and Paint qualities are available upon request by the Specifier. Installation Framing shall be installed, glazed and adjusted accordingly to the manufacturer's instructions and approved shop drawings. All items in this section shall be set level, square and plumb and at their correct location and alignment with other work. Protection and Cleaning Framing shall be protected from other building materials during and after installation until acceptance by the General Contractor.

3 SERIES CURTAIN WALL FRAMING DETAILS E - SERIES /"(MM) WIDE THERMALLY IMPROVED CURTAIN WALL FRAMING SYSTEM CAN BE USED FOR VARIOUS APPLICATIONS, SUCH AS STOREFRONTS AND ENTRANCE FRAMING, OR HIGH PERFORMANCE PUNCHED WINDOWS AND HORIZONTAL STRIP WINDOWS. -RANGE OF MULLION DEPTHS AVAILABLE: -/"(0MM), -/"(7MM), - /"(00MM) OR -/" (MM) FOR OPTIMUM STRUCTURAL REQUIREMENTS COMBINED WITH A /" (0MM) EXTERIOR SNAP CAP TO SUIT THE REQUIRED DESIGN PARAMETERS. -FRAMING SYSTEM OFFERS PRESSURE EQUALIZED RAIN SCREEN CAPABILITIES WITH THE DRY/DRY GLAZING GASKET METHOD AND VENTED HORIZONTAL MULLION GLAZING POCKETS. -FRAMING SYSTEM ALLOWS FOR EXTERIOR AND INTERIOR COLOUR COMBINATIONS. -OFFERS A NARROW /" SIGHT LINE AND IS TOTALLY COMPATIBLE WITH ALL DESA ENTRANCE DOOR PACKAGES, THERMALLY IMPROVED AND NON THERMALLY IMPROVED TYPE. -SYSTEM ACCOMMODATES FOR BOTH SEALED UNIT AND SPANDREL GLAZING AND ALSO THE DESA 0 SERIES VENT INSERT WINDOW. SPANDREL DETAIL SCALE: /8" = "

4 SERIES CURTAIN WALL FRAMING DETAILS E OPTIONAL CORNER ADAPTOR FOR 90 DEGREE CORNERS SCALE: /8" = "

5 SERIES CURTAIN WALL CORNER DETAILS E / INCH REVEAL 7/ INCH REVEAL 0 0 FLUSH TO CORNER / INCH REVEAL 0 0 SCALE: /" = "

6 SERIES CURTAINWALL FRAMING PARTS E /" () /" () /" () /" () /" (0) /" (7) /" (00) /" () D0 D0 /" (0) D0 D80 DOOR ADAPTER D8 DOOR ADAPTER CAP /" (0) /" (8) D0 PRESSURE PLATE D0 SNAP-ON CAP D0 CORNER ADAPTER D0 " () F008 DOOR STOP COVER D70 SINGLE GLAZING ADAPTER D0 SNAP-ON CAP TB00 DOOR ADAPTER THERMAL BARRIER F009 DOOR STOP BASE TB THERMAL BARRIER MH PILE WEATHERING N08 FIXED GLAZING GASKET SCALE: /8" = " A0, A0, A0 SERIES SHEAR BLOCK

7 SERIES CURTAINWALL PARTS LIST E PART PART NO. DESCRIPTION STOCK LENGTH IN FINISH CLEAR BRONZE ANODIZED ANODIZED D0 0mm BACK SECTION 7.9 D0 7mm BACK SECTION 7.9 D0 00mm BACK SECTION 7.9 D0 mm BACK SECTION 7.9 D0 CORNER ADAPTER 7.9 D70 SINGLE GLAZE ADAPTER 7.9 D80 DOOR ADAPTER MAIN (For use with D0 Cap only).8 D8 DOOR ADAPTER CAP (For use with D0 Cap only).8 D D0 D0 D=0mm D=8mm SNAP-ON CAP SNAP-ON CAP D0 00 MM CAP 7.9 (NOT STOCKED / SPECIAL ORDER) D0 PRESSURE PLATE 7.9 D7 TRIPLE GLAZE ADAPTER 7.9 F008 DOOR STOP COVER.

8 SERIES CURTAINWALL PARTS LIST E7 PART PART NO. DESCRIPTION STOCK LENGTH IN CLEAR ANODIZED FINISH BRONZE ANODIZED F009 DOOR STOP BASE. A0 D0 SHEAR BLOCK A0 D0 SHEAR BLOCK A0 D0 SHEAR BLOCK S0 D0 SLEEVE ANCHOR S0 D0 SLEEVE ANCHOR S0 D0 SLEEVE ANCHOR N08 FIXED GLAZING GASKET. M (00 ') PER ROLL TB THERMAL BARRIER. M (00') PER ROLL MH PILE WEATHERING CP0 CORNER PLUG TB00 DOOR ADAPTER THERMAL BARRIER.9 FB mm ALUMINUM SLEEVE ANCHOR BASE PLATE SIDE LOAD FB mm ALUMINUM SLEEVE ANCHOR BASE PLATE BACK LOAD

9 SERIES CURTAINWALL WIND LOAD CHARTS E8 /" /" 0mm 0mm D0 -.9 kpa (0 PSF) -.8 kpa ( PSF) -. kpa (0 PSF) -.0 kpa ( PSF) -.9 kpa (0 PSF) -.7 kpa ( PSF) D0 (C/W /" X /" X /8" HSS STEEL INSERT DEFLECTION CRITERION: L/7 OR L/0+/

10 SERIES CURTAINWALL WIND LOAD CHARTS E9 /" /" 7mm 00mm D0 -.9 kpa (0 PSF) -.8 kpa ( PSF) -. kpa (0 PSF) -.0 kpa ( PSF) -.9 kpa (0 PSF) -.7 kpa ( PSF) D0 DEFLECTION CRITERION: L/7 OR L/0+/

11 SERIES CURTAINWALL WIND LOAD CHARTS E0 /" 00mm /" mm (C/W C X.) D0 -.9 kpa (0 PSF) -.8 kpa ( PSF) -. kpa (0 PSF) -.0 kpa ( PSF) -.9 kpa (0 PSF) -.7 kpa ( PSF) D0 DEFLECTION CRITERION: L/7 OR L/0+/

12 SERIES CURTAINWALL WIND LOAD CHARTS E /" mm D0 (C/W C X.) -.9 kpa (0 PSF) -.8 kpa ( PSF) -. kpa (0 PSF) -.0 kpa ( PSF) -.9 kpa (0 PSF) -.7 kpa ( PSF) DEFLECTION CRITERION: L/7 OR L/0+/

13 00 SERIES CURTAINWALL FRAMING DETAILS E - 00 SERIES /" ( MM) WIDE THERMALLY IMPROVED CURTAIN WALL FRAMING SYSTEM CAN BE USED FOR VARIOUS APPLICATIONS, SUCH AS FULL CURTAIN WALL AND STOREFRONT FRAMING, OR HIGH PERFORMANCE PUNCHED WINDOWS AND HORIZONTAL STRIP WINDOWS. - RANGE OF MULLION DEPTHS AVAILABLE: 7/8"(7MM), /8"(9MM) OR /" (MM) FOR OPTIMUM STRUCTURAL REQUIREMENTS COMBINED WITH A /" (9MM) EXTERIOR SNAP CAP TO SUIT THE REQUIRED DESIGN PARAMETERS. - FRAMING SYSTEM OFFERS PRESSURE EQUALIZED RAIN SCREEN CAPABILITIES WITH THE DRY/DRY GLAZING GASKET METHOD AND VENTED HORIZONTAL MULLION GLAZING POCKETS. - FRAMING SYSTEM ALLOWS FOR EXTERIOR AND INTERIOR COLOUR COMBINATIONS. - OFFERS A /" SIGHT LINE AND IS TOTALLY COMPATIBLE WITH ALL DESA ENTRANCE DOOR PACKAGES, THERMALLY IMPROVED AND NON THERMALLY IMPROVED TYPE. - SYSTEM ACCOMMODATES FOR BOTH SEALED UNIT AND SPANDREL GLAZING AND ALSO THE DESA 0 SERIES VENT INSERT WINDOW SCALE: /8" = "

14 00 SERIES CURTAINWALL FRAMING DETAILS E SCALE: /8" = "

15 00 SERIES CURTAINWALL FRAMING DETAILS E " REVEAL /8" REVEAL C0 STANDARD CORNER C0 STANDARD CORNER FLUSH TO CORNER C0 STANDARD CORNER C0 WITH NOSE REMOVED FOR SILICONE GLAZING SCALE: /" = "

16 00 SERIES CURTAINWALL FRAMING DETAILS E 00 SERIES SSG STRUCTURAL SILICONE GLAZING SCALE: /" = "

17 00 SERIES CURTAIN WALL FRAMING PARTS E /" () /" () /" () /8" (9) 7/8" (7) C0 C0 C0 SSG MULLION C0 TB8 THERMAL BARRIER TB7 THERMAL BARRIER SSG F008 F009 PIECE DOOR STOP N08 INTERIOR GASKET C0 SINGLE GLAZING ADAPTER SSG D70 SINGLE GLAZING ADAPTER C0 CORNER ADAPTER N EXTERIOR GASKET CP0 CORNER PLUG N INTERIOR GASKET SSG CP0 CORNER PLUG SSG N8 SSG MULLION GASKET /8" () /" () C DOOR ADAPTER SB, SB 00 SERIES SHEAR BLOCK /" (9)

18 00 SERIES CURTAIN WALL FRAMING PARTS E7 /" (9) " (7) " () /" (8) C0 SNAP-ON CAP C0 SNAP-ON CAP C0 SNAP-ON CAP / " (9) C08 SNAP-ON CAP C09 PRESSURE PLATE 7" (78) " () /" (70) C0 SNAP-ON CAP R " (00) C90 COLUMN CAP /" (9) " () C0 SNAP-ON CAP C0 PRESSURE PLATE C9 SNAP-ON CAP C9 7" PRESSURE PLATE

19 00 SERIES CURTAIN WALL PARTS LIST E8 PART PART NO. DESCRIPTION STOCK LENGTH IN CLEAR ANODIZED FINISH BRONZE ANODIZED C0-7/8" BACK SECTION 7.9 C0 -/8" BACK SECTION 7.9 C0 -/" BACK SECTION 7.9 C0 -/" SSG BACK SECTION 7.9 /" C0 /" SNAP ON CAP 7.9 D C0 C0 D = " SNAP ON CAP D = /" SNAP ON CAP NOT STOCKED NOT STOCKED C0 D = " SNAP ON CAP 7.9 /" /" C0 /" SNAP ON CAP 7.9 C0 PRE PUNCHED DRY GLAZED PRESSURE PLATE 7.9 /" " C08 " SNAP ON CAP 7.9 C09 " DRY GLAZED PRESSURE PLATE 7.9 7" C90 7" COLUMN SNAP ON CAP 7.9 C9 7" SNAP ON CAP 7.9 C9 7" DRY GLAZED PRESSURE PLATE 7.9

20 00 SERIES CURTAIN WALL PARTS LIST E9 PART PART NO. DESCRIPTION STOCK LENGTH IN CLEAR ANODIZED FINISH BRONZE ANODIZED F008 F009 PC DOOR STOP. C DOOR ADAPTER.8 C0 SINGLE GLAZE ADAPTER FOR SSG 7.9 C70 SINGLE GLAZE ADAPTER 7.9 C80 VENEER ADAPTER 7.9 SB SB SHEAR BLOCK FOR 0 / 0 SHEAR BLOCK FOR 0 S0 C0 SLEEVE ANCHOR S0 C0 SLEEVE ANCHOR FB mm ALUMINUM SLEEVE ANCHOR BASE PLATE SIDE LOAD FB mm ALUMINUM SLEEVE ANCHOR BASE PLATE BACK LOAD

21 00 SERIES CURTAIN WALL PARTS LIST E0 PART PART NO. DESCRIPTION STOCK LENGTH IN CLEAR ANODIZED FINISH BRONZE ANODIZED N08 INTERIOR GASKET. M (00') PER ROLL N EXTERIOR GASKET 8. M (70') PER ROLL N INTERIOR GASKET FOR SSG. M (00') PER ROLL N8 SSG MULLION GASKET. M (00') PER ROLL TB8 THERMAL BARRIER 9. M (00') PER ROLL TB7 THERMAL BARRIER FOR SSG 7. M (0') PER ROLL CP0 CORNER PLUG CP0 CORNER PLUG FOR SSG

22 00 SERIES CURTAIN WALL WIND LOAD CHARTS E 7/8" (7) C0 -.9 kpa (0 PSF) -.8 kpa ( PSF) -. kpa (0 PSF) -.0 kpa ( PSF) -.9 kpa (0 PSF) -.7 kpa ( PSF) /8" (9) C0 DEFLECTION CRITERION: L/7 OR L/0+/

23 00 SERIES CURTAIN WALL WIND LOAD CHARTS E /" () /" () C0 -.9 kpa (0 PSF) -.8 kpa ( PSF) -. kpa (0 PSF) -.0 kpa ( PSF) -.9 kpa (0 PSF) -.7 kpa ( PSF) C0 (C/W " X " X /" HSS TUBE) DEFLECTION CRITERION: L/7 OR L/0+/

24 00 SERIES CURTAIN WALL WIND LOAD CHARTS E /" () /" () C0 -.9 kpa (0 PSF) -.8 kpa ( PSF) -. kpa (0 PSF) -.0 kpa ( PSF) -.9 kpa (0 PSF) -.7 kpa ( PSF) C0 DEFLECTION CRITERION: L/7 OR L/0+/

25 00 SERIES CURTAIN WALL WIND LOAD CHARTS E /" () /" () C0 -.9 kpa (0 PSF) -.8 kpa ( PSF) -. kpa (0 PSF) -.0 kpa ( PSF) -.9 kpa (0 PSF) -.7 kpa ( PSF) C0 (C/W " X " X /" HSS TUBE W/ " X /" PLATE) DEFLECTION CRITERION: L/7 OR L/0+/

26 SUNSHADES E FOR SECTIONS WIDER THAN FT. ON CENTRE AND/OR SECTIONS PROJECTING GREATER THAN 7 /", CONTACT DESA FOR DETAILS. 7 /"

27 SUNSHADES FRAMING PARTS E /" mm /" mm SS0 OUTRIGGER SS0 LOUVER SS0 FACIA SS0 ANCHOR /" mm /" mm /8" R