LANDMARK PRODUCT GUIDE

Transcription

1 LANDMARK PRODUCT GUIDE STRONG, EFFICIENT AND VERSITILE INTERLOCKING WALLS AND BLOCKS Creative Design Functionality

2 CONCRETE WALLS AND BLOCKS LANDMARK WALLS RETAINING WALL SYSTEMS 00MM WALL By using full height blocks (600 mm), or half blocks (00 mm), or a combination of half and full height (00 & 600 mm) LANDMARK is able to achieve a degree,. degree or 0 degree setback to suit any heavy construction application. LANDMARK is primarily utilized by transport and municipal engineers, as well as landscape architects. This wall system is structurally sound and blends aesthetically. 600MM WALL

3 CONCRETE WALLS AND BLOCKS LANDMARK WALL INSTALLATION The LANDMARK block is a fast efficient way to retain soil on both large and small projects. Walls over feet (. m) require engineered drawings to provide guidance on soil tests, geogrid, proper base and back fill. Brooklin Concrete Products can help provide creative design ideas to install large walls requiring as little back fill as possible. LANDMARK blocks are a fast efficient way to install a retaining wall as each full size block cover.6 face sq. ft. All LANDMARK retaining wall blocks must be.8 kpa SURCHARGE, NO BACKSLOPE GEOGRID REQUIREMENTS installed by a crane or an excavator at the site. A clamp is provided to make the installation quick and easy. It should be noted that LANDMARK can also be manufactured as a flat bottom unit so that the first course of the wall can be installed level. MAX. WALL HEIGHT (m) GEOGRID LENGTH (m).0 NOT REQ D kpa SURCHARGE, NO BACKSLOPE having to cut the blocks. It also allows for erecting walls with staggered joints. LENGTH WEIGHT 800mm 0 lbs. (8.8 kg) 00mm 00 lbs. (9. kg) 900mm lbs. (. kg) 00 lbs. (6. kg) 00mm 800mm lbs. (. kg) 00mm 00mm 00 lbs. (6. kg) 00mm 900mm 90 lbs. (8. kg) 00mm lbs. (8. kg) 00mm MAX. WALL HEIGHT (m) GEOGRID LENGTH (m) GEOGRID ELEVATIONS TOP OF UNIT NO.*.0.00 BEARING CAPACITY REQUIRED (kpa) : kpa HORIZONTAL TO VERTICAL BACKSLOPE GEOGRID REQUIREMENTS Corner Blocks GEOGRID REQUIREMENTS fully interlocked inside and outside corners without WIDTH BEARING CAPACITY REQUIRED (kpa).80 The following sizes are manufactured to assemble HEIGHT GEOGRID ELEVATIONS TOP OF UNIT NO.* 0 lbs. (90. kg) MAX. WALL HEIGHT (m) GEOGRID LENGTH (m) GEOGRID ELEVATIONS TOP OF UNIT NO.*.0 NOT REQ D BEARING CAPACITY REQUIRED (kpa) ** UNIT NUMBER IS COUNTED FROM BOTTOM OF WALL UP GEOGRID IS SOLD AT YOUR LOCAL BROOKLIN CONCRETE BRANCH

4 CONCRETE WALLS AND BLOCKS SUGGESTED LANDMARK CONFIGURATION FULL BLOCKS SETBACK PEDESTRIAN GUARD AS REQUIRED (BY OTHERS) SEE TABLES FOR DESIGN SURCHARGE LOADS CONCRETE CURB AS REQUIRED TOP & BOTTOM COURSES CAN BE 00mm HIGH IF REQ. TO SUIT FINISHED GRADE ELEVATIONS TOP LAYER OF GEOGRID TO BE LONGER THAN LOWER LAYERS (TYP.) LANDMARK PRECAST CONCRETE UNIT ( WIDE X HIGH) MANUFACTURED BY BROOKLIN CONCRETE PRODUCTS (TYP.) RETAINED SOIL. EFFECTIVE INTERNAL ANGLE OF FRICTION: 8 DEG. SOIL DENSITY: 8 kn/m (SOIL PROPERTIES TO BE VERIFIED DURING CONSTRUCTION) INFILL SOIL GRANULAR B COMPACTED TO 98% MAX. PROCTOR DRY DENSITY, PLACED N 00mm LIFTS (MAX) DEGREE BATTER (MIN.) GEOGRID. MIGRATED XT OR REVIEWED EQUIVALENT SEE TABLE ON PG FOR GEOGRID REQUIREMENTS 900mm WIDE X 0mm DEEP GRANULAR A BASE COMPACTED TO 98% SPMDD 0mm DIA PVC PERFORATED DRAIN PIPE WRAPPED IN FILTER CLOTH. CONNECT DRAIN TO FREEFLOWING OUTLET OR CATCH BASIN FOUNDATION SOIL. SEE TABLES FOR DESIGN SOIL BEARING PRESSURE (SOIL BEARING CAPACITY TO BE VERIFIED DURING CONSTRUCTION BY A GEOTECHNICAL ENGINEER). GEOGRID LENGTH SEE TABLE TYPICAL CROSS SECTION LANDMARK is truly an amazing retaining wall system that combines both strength and versatility to suit heavy duty wall applications.

5 LANDMARK BLOCKS 600 SERIES FLAT 00 SERIES FLAT CORNERS NO POCKET 600 x 800 NAT Flat 600 x 00 NAT Flat 600 x 900 NAT Flat 600 x 600 NAT Flat 00 x 800 NAT Flat 00 x 00 NAT Flat 00 x 900 NAT Flat 00 x 600 NAT Flat 600 x 00 LMDK 90 OS CNR WP FLT 600 x 00 LMDK 90 OS CNR WP KEY 600 SERIES KEY 600 x 800 NAT Key 600 x 00 NAT Key 600 x 900 NAT Key 600 x 600 NAT Key 00 SERIES KEY 00 x 800 NAT Key 00 x 00 NAT Key 00 x 900 NAT Key 00 x 600 NAT Key CORNERS WITH POCKET 600 x 00 LMDK 90 OS CNR WP FLT 600 x 00 LMDK 90 OS CNR WP KEY Brooklin Concrete Products has developed cross sectional drawings and charts in CAD format showing a variety of engineered wall applications. OUTSIDE CORNERS Requires 00 Corner Blocks INSIDE CORNERS All 800 Series Blocks Work With The Inside Corner NOTE: Custom sizes and angles can be manufactured according to drawings. CORNER BLOCKS 600 LDMK IS CNR LH FLT 600 LDMK IS CNR LH KEY 600 LDMK OS CNR LH KEY 600 LDMK OS CNR LH FLT 600 LDMK IS CNR RH FLT 600 LDMK IS CNR RH KEY 600 LDMK OS CNR RH KEY 600 LDMK OS CNR RH FLT INSIDE RIGHT CORNER RIGHT FLAT RIGHT CUSTOM ANGLES AVAILABLE UPON REQUEST

6 Since 9, Brooklin has been serving the needs of construction professionals, architects and specifiers as well as homeowners throughout Ontario. As a leading producer of innovative precast products, Brooklin has a complete line of Hardscape, Septic Tanks, Utility Structures and Specialty Precast Units. BROOKLIN OFFICE brooklinsales@brooklin.com 660 Baldwin Street, Brooklin, ON, Canada LM X8 T: F: NEWMARKET OFFICE newmarketsales@brooklin.com 899 Yonge Street North, East Gwillimbury, ON, Canada L9N 0J T: F: HUNTSVILLE /HALIBURTON OFFICE huntsvillesales@brooklin.com Stephenson Road (East of Hwy ), Huntsville, ON, Canada PH K8 T: F: