1.5 mechanical lock ml 150

Transcription

1 1.5 mechanical lock ml 150 Strip Width Base Material Thickness Min Tensible Min Yield Coatings Max 16 Steel.0225 to.0336 in 52 - ksi 50 - ski Painted / Galvalume UL CONSTRUCTION NUMBERS: TGKX554 The Mechanical Lock (ML) features structural performance as well as architectural aestheticas in ML 150 (1.5 high). Can be factory formed and/or fabricated on site for all the substrates described in the UL Construction numbers mentioned above. UL performed tests For Uplift Resistance of Roof Assemblies UL 580, CLASS 90 For impact resistance of prepared Roof-Covering Materials UL2218, CLASS 4 Fire Tests of roof Coverings UL 790, EXTERNAL FIRE EXPOSURE Features 24 ga steel or 26 ga steel. Colors available on standard, premium and metallic. 16 o.c. On site or factory made. Available in smooth, striated, offset and stiffener ribs. 1.5 High Rib. Finish Kynar 500, Galvalume, Galvanized. requirements Large variety of substrates, including: Open Purlin, Purlin-Metal decking-iso Vapor barrier when using ISO or solid substrate. Minimum Roof Slope 1 1/2 :12 If UL Raiting is required, QM needs to be notified prior to the panel fabrication 1

2 1.5 mechanical lock ml 150 UL Construction Number Panel Coverage (in) Gauge Clip Max. Clip spacing Roof Substrate Impact Resistance UL-2218 Fire Rating UL-263 Uplift Resistance UL Max in Fix 4-0 Plywood Class 4 Class A Class 90 min Notes Test Procedures are in accordance with Underwriters Laboratories Standard UL-580 under Test for Uplift Resistance of Roof Assemblies. QM ML150 Panels carry a Class 4 rating under UL-2218 Test Standard for Impact Resistance 2

3 ul construction number tgkx Metal Roof Deck Panels* - No. 24 MSG min thick coated steel. Max width 16 in., with 1-1½ in. high ribs. Panels continuous over three or more clips no end laps. 2.- Roof Deck Fasteners*- (Panel Clips) -One- piece assembly, 1 in. wide, 1-5/8 in. high. Min thickness (No. 24 MSG). Clips spaced 48 in. OC. Four fasteners per clip. 3.- Fasteners (Screws) - Fasteners used to attach the plywood (item 4) to the joists to be No. 7-6 coarse thread, No. 1 Phillips drive, bugle-head coated steel wood screws. Panel clip (item 2) to plywood fasteners to be No by 1 in. long, No. 2 Phillips drive, wafer head plated steel wood screws. 4.- Plywood Decking - Plywood decking to be nominal ½ in. (15/32 in. actual) thick APA Rated sheathing. The grade of plywood to be B-C. 5.- Underlayment - One layer of 30 lb. felt, fastened to the plywood deck (item 4) per manufacturer s instructions. Sides overlapped min 2 in., end laps per manufacturer s instructions. 6.- Joists - Spaced a maximum of 24 in. OC. Graded dimension lumber, No. 2 or better. 3

4 1.5 mechanical lock ml 150 Introduction ML-150 is a structural panel which is mechanically seamed during installation. The product is an integral interlocking system by design meaning the panels install in one direction from a given starting point. ML-150is a very flexible panel design which works well with a wide range of building designs. Four different clips are available: Low Floating, High Floating, Fixed, and Special Fixed for fixing panel at center point allowing for multi-directional expansion. Design Completely Concealed Fastened Roofing ML-150 Standing Seam requires low maintenance. The panel is secured with concealed clips and the panel side laps are locked together using a rooftop seaming machine. Applications Architectural Standing Seam Metal Roofing System Ideal for commercial applications. Typically specified as an accent feature for schools, shopping centers, banks, hotels, offices, and a variety of other applications. Tools and Equipment Installer must have prior experience and knowledge of the tolls listed below and their uses in working with metal roofing. Caulking Gun Snips Cordless Screw Gun Pop Rivet Tool Tape Measure Hemming Tool Electrical Extension Cord Heavy Gloves Safety Glasses. Specifications Color and Finishes 24 Gauge Galvalume 35 Year Finish Warranty on Kynar 500 Finish Widths Actual Panel Coverage (Width): 16 and 20 Minimum Slope = 3":12" Lengths ML-150 Panel is available in standard lengths from 4 to 40. Longer lengths require additional handling, packaging, and shipping considerations. An extra handling charge may apply to panels over 40. Continuous Rollformed Lengths: eliminates need for panel lap joints. Installation Solid Substrate Required Seamer Machine Required Weather Tight Warranty is not Available Underlayment Required Oil Canning Offset, striations and pencil ribs provide strength and reduce the incidence of oil canning in the panels. Testing UL 790 Fire Test of Roof Coverings, Class A, B, C UL 2218 For Impact Resistance, Class 4 UL 580 Uplift Resistance. Class 90 Construction No Packaging Options Standard packing A packaging charge will be added to all orders. Standard packing is crating for all orders. LTL packing For LTL, panels are packaged in a completely enclose crate to provide optimum protection. Additional charges will apply for non-standard packing and special requests. 4

5 Strippable film Removal The panels may have a protective strippable film layer applied to the topside of the panel to prevent possible damage to the painted surface. If panel has a protective film coating, remove the film before exposing to direct sunlight and high temperatures. After exposure to sunlight, the film cannot be removed. Under no circumstances should the film remain on the panels after installation. Receiving Materials It is the responsibility of the installer to unload material from the delivery truck. The installer shall be responsible for providing suitable equipment for unloading of material from the delivery truck. After receiving material, check the condition of the material, and review the shipment against the shipping list to ensure all materials are accounted for. If damages or shortages are discovered, it should be noted on the shipping copy at time of delivery. If material is delivered by common carrier, a claim must be made with the carrier as soon as possible. Manual Handling A panel should never be picked up by its ends. Instead, lift the panel along its longitudinal edge and carry in a vertical (not flat) position. Safety Metal Panels can become slippery, so always wear shoes with non-slip soles. Walking or Standing on a metal roof which do not have plywood or other deck beneath it is not recommended. However, if you must do so, always walk on the purlins, never between. Delivery and Packing Options Lead Time Please allow 2-3 days for delivery for material or colors we have in stock. Color we have to paint please allow working days. Touch Up Paint All painted panels and flashings have a factory applied baked on finish. Handling and installing panels may result in some small scratches or nicks to the paint finish. Touch-up paint is available in matching colors. It is recommended that a small brush be used to apply touch-up paint to those areas that are in need of repair. Touch-up paint does not have the superior chalk and fade resistance of the factory applied paint finish and will normally discolor at an accelerated rate. Periodic touch-up may be required to maintain color match. There is no warranty on touch-up paint in regards to color match because the paint processes are different. Aerosol paint should not be used because of the overspray that may occur. Storage Bare Galvalume and painted panels can be expected to give many years of rust-free service when precautions are taken during storage. If metal is not to be used immediately, store inside in a well ventilated, dry location. Any outdoor storage is at the customer s own risk! At time of delivery, inspect panels for moisture. If moisture has formed, the panels should be uncrated, wiped dry, and allowed to dry completely. Failure to remove the entrapped moisture between the sheets immediately will affect the service life of the metal. Extended storage of panels in a bundle is not recommended. Storage on Roof, Crates need to be placed parallel to the framing members and the slope of the roof. Load capabilities of the structure must be checked prior to placing crates on the roof. 5

6 trim himp ridge himp ridge valley w/ integral cleat drip edge locking pitch change z bar end wall 6

7 RC24-SO13 A= 6 B=½ RC24-SO12 A=5 B=1 RC24-SO16 A=7 B=1 RC24-SO20 A=9½ B=1 RC24-SO24 A=11 B=1 RCS24-SO16 A= 4½ B=1 C=2 D=½ PC24-SO16 A= 5 B=1 C=2 D=7½ E=½ Z24-SO314 A=1 B= 1/4 C=1 Z24-SO334 A=1 ¾ B= 1¼ C=1 Z24-SO414 A=1 B=2 ¼ C=1 3 ¼ 3 ¾ 4 ¼ VENTED ZEE AVAILABLE, PLEASE INQUIRE 7

8 GUS24-SO235 A=4 B=4 C=7 D 3½ E=1 GU24-SO2114 A= 4½ B= 5¼ C 5½ D= 3 E= 1 F=1 21 ¼ 20 DS24-SO1618 A= 4 B= 3 C= 3½ VC24-SO24 A=4 B=1 C=5 D=1 E=1 8

9 CS24-SO418 A=2 B=5/8 C=1½ D=3/16 DRIP EDGE (DL) DL24-SO08 A=3 ¾ B=1 ¼ C=2 D=½ EAVE (OFFSET CLEAT) A EC24-SO08 A=4 B=3 C=½ B C SIDEWALL SW24-SO09 A=3 B=5 C= A C B 9

10 TRIM A JC24-SO06 A=3 3/8 B=1 1/8 C=1 D=½ D B C FW24-SO1078 A=6 B=5 5/8 C=1 ¼ D=½ EW24-SO09 A=3 B=5 C=1 HIGH SIDE FASCIA FH24-SO13 A=3 B=5 C=½ 10

11 1.5 mechanical lock 150 ACCESSORIES pipe flashing metal to metal metal to wood pancake wood pancake metal clips sealants 11

12 ACCESSORIES ITEM PIPE FLASHING - GRAY EPDM PIPE FLASHING - SILICONE PIPE SIZE RANGE 1¼ TO ⅛ 1¼ TO 2 1¾ TO 4 1¼ TO 4 3 TO 6 4 TO 7 6 TO 11 7 TO TO TO 24 PIPE SIZE RANGE 1¼ TO 4 4 TO 7 7 TO TO 18 DESCRIPTION EPDM rubber service temperature 65 f to 250 f if slope is more than 20 f use next size up BASE DIMENSION 3½ 3¾ 6¼ 7¾ 9¼ 10¾ 14½ 16½ 25⅜ 39½ X 35 SQ BASE DIMENSION 7 3¾ 10 ¾ 16 ½ 16 ½ (HIGH TEMPERATURE) RETROFIT PIPE FLASHING GRAY EPDM PIPE SIZE RANGE ¾ TO 2¾ 2 TO 7 ¼ 3 ¼ TO 10 silicone service temperature 40 to 350 if slope is more than 20 use next size up BASE DIMENSION 6 ¼ 10 ¾ 14 ½ POP RIVET mechanical lock fixed clip finish plain stainless steel # 42, #43, #44, #46 painted stainless steel #42 EPDM rubber service temperature 65 f to 250 f if slope is more than 20 f use next size up Box size panel system height gauge box qty ml ⅝ 26 1,000 kynar 500 flashing- 24 ga typ galvalume Acrylic coated galvalume galvalume is a trade mark of biec, inc. 12

13 ACCESSORIES ITEM Pancake wood 1 DESCRIPTION finish Bag size Box size plain x 1 No. 2 phillips self driling 1 pancake finish Bag size Box size plain 250 2, x 1 No. 2 phillips finish Bag size Box size plain 250 2,000 painted 250 2,000 ¼- 14 x ¾ type ab metal to wood finish Bag size plain 250 painted 250 Box size 2,000 2, x 1 type 17 metal to wood 10 oz tube np1 caulk sealer kynar 500 flashing- 24 ga typ galvalume Acrylic coated galvalume galvalume is a trade mark of biec, inc. type color carton qty carton weight np1 np1 np1 np1 np1 np1 np1 np1 clear gray gray bronze tan almond black white green

14 Wood - Counter Flashing W/ Reglet Detail CLIP cird

15 Wood - Counter Flashing surface reglet detail CLIP csrd

16 Wood - Counter Flashing SIDING reglet detail CLIP csrd

17 Wood - EAVE FLASHING DETAIL EFD

18 Wood - EAVE gutter DETAIL EgD

19 Wood - ENDWALL DETAIL CLIP EWD

20 Wood - HIGHSIDE W/SIDING DETAIL CLIP HSSD

21 Wood - RAKE 90 DETAIL CLIP r9d-1 21

22 Wood - RAKE flashing detail CLIP rfd-1 22

23 Wood - ROOF JACK DETAIL 2 0.C. ROOF JACK FLASHING CLIP SEALANT BETWEEN PIPE BOOT AND PANEL rjd-01 23

24 Wood - Rake w/ Z detail FASTENER RAKE Z CLOSURE ATTACHED W/ 12 O.C. 12 O.C. BUTYL TAPE 12 O.C. CLEAT RAKE FLASHING WOOD DECK ICE & WATERSHIELD FIELD BEND PANEL W/ BUTYL TAPE SEALANT rzd-01 24

25 Wood - SIDE WALL DETAIL SEALANT 12 O.C. COUNTER FLASHING SIDEWALL FLASHING RAKE Z CLOUSURE ATTACHED W/ O.C. BUTYL TYPE SEALANT CLIP ICE & WATERSHIELD WOOD DECK BY OTHERS FIELD BEND PANEL SWD-01 25

26 wood side wall w/insert cleat detail SEALANT 12 O.C. COUNTER FLASHING SIDEWALL FLASHING BUTYL TAPE SEALANT RAKE Z CLOSURE ATTACHED W/ 12 O.C. ML-150 PANEL CLIP ICE & WATERSHIELD WOOD DECK BY OTHERS FELD BEND PANEL SWD-01 26

27 wood side wall w/siding DETAIL SIDING BY OTHERS 12 O.C. COUNTER FLASHING SIDEWALL FLASHING BUTYL TAPE SEALANT RAKE Z CLOSURE ATTACHED W/ 12 O.C. CLIP ICE & WATERSHIELD WOOD DECK BY OTHERS FIELD BEND PANEL SWS-01 27

28 WOOD - VALLEY W/ INTEGRATED CLEAT DETAIL SEALANT BETWEEN WEBS FILL PANEL HEM WITH BUTYL SEALANT 6 MIN VALLEY FLASHING CLIP SELF- FHERING HT UNDERLAYMENT #10 X 1 PANCAKE FASTENER@12 O.C. ICE & WATERSHIELD WOOD DECK VICD-01 28

29 WOOD - HIP RIDGE DETAIL HIP/RIDGE FLASHING (3) FASTENERS PER PANEL BUTYL TAPE SEALANT 90 DEG. TURN - UP SEALANT FASTENER, 12. O.C. Z CLOSURE BUTYL TAPE SEALANT WOOD DECK BUTYL TAPE SEALANT (3) FASTENERS PER PANEL ML-150 PANEL CLIP BUTYL TAPE SEALANT ICE & WATERSHIELD WHR-01 29

30 PLATE EAVE DETAIL PED

31 PLATE EAVE DETAIL-2 PED

32 PLATE EAVE DETAIL-3 PED

33 PLATE EAVE DETAIL-4 PED

34 PLATE END WALL DETAIL PEWD

35 PLATE GLOBAL DETAIL PGD

36 PLATE GUTTER DETAIL PGTD

37 PLATE HIGH END DETAIL PHE

38 PLATE HIGH END DETAIL PHR

39 PLATE HEAD WALL DETAIL PHW

40 PLATE PITCH CHANGE DETAIL PPCH

41 PLATE VALLEY DETAIL PVD

42 PLATE VENTED RIDGE DETAIL PVR