Date: Kitchen Project General Services GC/PS Worksheet

Transcription

1 Customer Information Kitchen Project General Services GC/PS Worksheet Which fixtures to be removed (check those being removed): Base Cabinets Wall Cabinets Countertops Sink Faucets Disposer Pantry Shelves Lighting Range/Cook Top OTR/Microwave Dishwasher Demolition Includes Haul Away and Disposal Demo to be performed: Full Kitchen Large Area Charge Remove All Fixtures Only Remove Tile/Wood Floor Dumpster Fee : Yes No Refrigerator Wall Oven Range Hood ONLY SECTION FOR DEMOLITION Full Kitchen (remove fixtures cabinets, c-tops, plumbing, lighting - walls to the studs, and/or floor to subfloor): Yes No Fixture Removal Only (remove cabinets c- tops, and appliances leave floors & walls): Yes No Fixed Rate Additional Demolition Charges Structural Use grid to draw measurements for any structural changes Construct non-load bearing wall/knee wall: Total sqft: (incl. framing, sheetrock, prepped to paint ready condition) Additional Structural Work (walls, soffits, etc.) 100 Sq ft or Less Kitchen sq ft: Carpet Laminate Floor Wood Floor Tile Floor Greater than 100 sq. ft incurs additional charges Remove existing tile or wood flooring (do not use with full kitchen demo above): Total Sq ft: Apply Structural Job Minimum (should only be used for small structural work jobs) Describe additional demo charges: Describe Additional Structural Charges: Non Load bearing wall/knee wall comments: (cost) Drywall Install drywall to prime ready condition: : Insulation Install insulation: : Special Services Install Wire Shelving (GC Quote): Apply Drywall Job Minimum (should only be used for small drywall jobs) Apply Insulation Job Minimum (should only be used for small insulation jobs) Additional Drywall Comments: Additional Insulation Comments: Describe Wire Shelving Charges: Professional Cleaning (as requested by customer) Yes No Mold Remediation (GC Quote): Professional Cleaning Comments: Describe Mold RemediationCharges:

2 Kitchen Project General Services GC/PS Worksheet Permit Fee Charges Describe Permit Fee Charges: Lead Safe Practices Charges: Describe Lead Safe Practice Charges: Additional Scope beyond current service levels to be entered as a separate price or estimate Use GC Only Services Additional Charge: Describe Additional Detailed Scope of Customer Purchased Materials Work Additional Services Additional Services RETURN THIS SHEET TO STORE WITHIN 1 BUSINESS DAY OF DETAIL APPT. ALL ESTIMATED WORK IS TO BE QUOTED AT GC COST. Kitchen Drawing Room Layout Structural Drawings Room A B C D E Total Square Feet (Product One) Total Square Feet (Product Two) Size/Material (Square Feet) Comments:

3 Customer Information Kitchen Project Cab/C-top GC/PS Worksheet Cabinets Base Cabinets Wall Cabinets Pantry Island Install base cabinets Install wall cabinets Number of cabinet pantry s to Install: Island Install Total linear feet of face cabinets to install: Island measured by total linear feet of facing cabinets Linear ft. Cabinet Details Basic Molding Complex Crown Cabinet Skins Install cabinet basic crown molding and other moldings (incl. toe kicks, quarter round, light rails, etc.) (Electric/plumbing captured separately) Install cabinet skins # of skins: Notate location: Install complex crown molding (complex, stacked, custom cut) Linear foot of finished molding: Countertops Granite/Solid Surface Laminate Butcher Block Stainless Steel Granite & solid surface type 2 program sold separately (Do not count individual layers) Install countertop - laminate, butcher block, stainless steel (type 1) (GC Quote): Additional Scope beyond current service levels to be entered as a separate price or estimate Services Additional Charge: Describe Additional Detailed Scope of Work Customer Purchased Materials Additional cabinet / c-top work Additional cabinet / c-top work Additional cabinet / c-top work Additional cabinet / c-top work

4 Customer Information Kitchen Project Appliances GC/PS Worksheet Appliances Appliances to be installed: Electric Range (drop-in) /Cook Top Gas/LP Range (drop-in) /Cook Top Dishwasher Built-in Refrigerator Electric Wall Oven (Sgl/Dbl) Gas/LP Wall Oven (Sgl/Dbl) Built-in/OTR Microwave Range Hood Additional Appliance Comments: Indicate quantity if more than 1: Indicate additional appliances to be hooked up (i.e., free-standing refrigerator, free standing range if charges apply list in additional scope below): Additional Scope beyond current service levels to be entered as a separate price or estimate (at ) Services Additional Charge: Describe Additional Detailed Scope of Work Customer Purchased Materials Additional Appliance (Built-in ice maker, etc.)

5 Client Information Client Name Kitchen Project Flooring GC/PS Worksheet Flooring Use grid to draw floor layout and seam placement (if necessary) Carpet to be sold following current process in ISST. Flooring to be installed: Vinyl Laminate Wood Ceramic/Tile Vinyl Flooring (sheet or tile) to install: Laminate Flooring to install: (Customer to purchase underlayment) Wood Flooring to install: Pattern (custom incurs upcharge): Standard Custom Sqft of flooring material to be ordered (incl. 10% excess): Ceramic/Porcelain Floor Tile Sq ft to install: Pattern (diag/custom patterns incur an upcharge): Straight Diagonal Brick Custom Subfloor replacement: to install: Non Ceramic/Non Porcelain Floor Tile (i.e. slate, marble, glass, etc.) Sq ft to install: Pattern (diag/custom patterns incur an upcharge): Straight Diagonal Subfloor scope of work: Diagonal Custom Backsplashes Tile Glass Stone Metal _ Install backsplash (incl. cutouts) : (tile, stone, glass, metal, etc.) Provide detailed description for backsplash: (provide detailed drawing if necessary for pattern) Additional backsplash charges (not captured above): Describe Additional Back Splash Charges: Cement Board of cement board to install: Additional Comments: (to be used with tile floors, walls & backsplashes) Additional Scope beyond current service levels to be entered as a separate price or estimate (at ) Services Additional Charge: Describe Additional Detailed Scope of Work Customer Purchased Materials Seal Tile and/or Grout (GC Quote) Additional Flooring (heated floors, refinishing, etc.)

6 Customer Information Finish Plumbing Fixtures to be installed: Sink Faucet Disposal Under Counter Fixtures Hot Water Dispenser Filtration System Softener System Kitchen Project Plumbing GC/PS Worksheet Number of sinks: (Do not double count for sinks already included with c-top installation includes faucet install) Number of disposals: INSTALL IN EXISTING LOCATION Number of faucets: (Do not double count for faucets already included with c-top or sink installation) Number of under counter fixtures (hot water or water filtration systems): Rough Plumbing New Plumbing fixtures or relocations (GC quote): Describe work to be completed: (Notate system to be installed) Bring up to Code Charge (GC Quote): Describe code work to be completed: Cutting concrete charges: Describe cutting concrete work to be completed: Temp Sinks Supply and hook up Temporary Sink? Yes No Additional Scope beyond current service levels to be entered as a separate price (at COST) Additional Charge Describe Additional Detailed Scope of Work Customer Purchased Materials Additional Plumbing Work Additional Plumbing Work Additional Plumbing Work Additional Plumbing Work

7 e Customer Information Kitchen Project Electric GC/PS Worksheet Finish Electrical Finish Electrical Lights/fans Outlets/switches Canned w/access Canned w/o access Number of light fixtures/fans to install (existing locations): REMOVE AND REPLACE IN SAME LOCATION Number of canned lights to Number of canned lights to install install w/ access: w/o access (GC quote): Describe any canned light install requirements: #: cost Number of switches and outlets to be replaced (includes GFI & covers): Rough Electrical New exhaust fans to install (GC quote): Describe exhaust fan charges: cost Add new location or relocate existing fixture location (GC quote): Describe new or relocated fixture charges: cost Bring up to code charge: Describe bring up to code charges: cost Cutting concrete charge Describe cutting concrete charges: cost Additional Scope beyond current service levels to be entered as a separate price or estimate (at ) Services Additional Charge: Describe Additional Detailed Scope of Work Customer Purchased Materials Additional Electrical Work Additional Electrical Work Additional Electrical Work Additional Electrical Work

8 Customer Information Kitchen Project Paint/Millwork GC/PS Worksheet Paint Walls, Ceilings & Molding: Molding/Trim: (no walls/ceilings) Total linear ft to be painted: to be painted: Additional Paint Charges : Additional Painting Comments: Describe Additional Paint Charges: Apply Paint Job Minimum (should only be used for small paint jobs) Millwork Molding Crown Molding Windows Int. Doors Ext. Doors Patio Doors Install single interior door # of Doors: Install (or remove/ replace) base molding (Excl. crown molding) Install single exterior door # of Doors: Install ceiling crown molding Install double exterior or hinged patio door # of Doors: Remove /replace window # of Windows: (Standard single/ double hung) Install sliding patio door # of Doors: Provide detailed drawing and measurements to ensure accurate product configuration (Incl. door cut and mortise) Comments Additional Millwork Comments: Additional Scope beyond current service levels to be entered as a separate price or estimate (at ) Services Additional Charge: Describe Additional Scope of Work Customer Purchased Materials Additional Millwork (Wainscoting, etc.) Additional Home Décor Charges (Blinds, shutters, wallpaper, etc.)