Section 5 Panels & Accessories

Transcription

1 Contents Section 5 Panels Stiffener/Handle 79 Wire Mesh 75 Sliding Door Guide 80 Panel Mounting locks 77 Rolling Door Guide 81 Mesh Retainers 78 ifold Door Glide Mesh Clamp 79 T-Clips 84 Panels & ccessories Panel Extrusion 79 Cable/Hose Holder 84 Cable Tie Holder Parker Hannifin Corporation

2 Panel Characteristics Panel Selection Guide Recommended Use Opacity Cost Vertical, Horizontal, Shelving, Shelving, Transparent Non- Vertical, Non- No Load or Panel Type Structural Structural Structural Load Supporting See Through Opaque Low Medium High Polycarbonate Wire Mesh TRESP Expanded PVC S luminum Honeycomb 1 Can be used, but not an economical solution. Panel Materials Polycarbonate Wire Mesh TRESP Expanded PVC S luminum Honeycomb High-impact resistant polycarbonate panels provide clarity, safety, security and energy savings. Meets every industry standard for general purpose window glazing. Clear or light grey smoked Wire mesh provides a high level of security and can be used for safety guarding and enclosures. PVC coating provides a smooth, snag-free surface that is extremely rust and corrosion resistant. TRESP is a solid grade decorative building panel, suitable for horizontal surfaces and vertical panels. Resistant to scratches, corrosives and solvents. Can be drilled and tapped Light duty colored panel material, primarily for use vertically. Can also be used as light duty shelving material. Not recommended for temperature over 90 F. Rigid colored panel material used for both vertical and horizontal panels. One side is smooth, and the other side is textured. These panels have a very high strength to weight ratio. The panels have thin aluminum skins on each side with a light weight honeycomb core in the center. These panels can be used in all types of applications from walls to shelves. Can be drilled and tapped Special Items Special panel materials including color selection of stock material are available. PS capabilities include custom machining of steel and alumunim panels for use in fixtures, machine bases and assemblies. Contact your local representative or an IPS Engineer to review special requirements. Special item availability includes: Machined Steel and luminum Surfaces Perforated Metal Decking Welding Curtains Decorative Panels Glass and Clear Plastic Composites Sound Insulating Panels Wood and Laminate Panels 74 Parker Hannifin Corporation

3 Panels High-impact resistant polycarbonate panels provide clarity, safety, security and energy savings. Meets every industry standard for general purpose window glazing. Polycarbonate, clear or light smoked UL Listed Maximum Size 4' x 8' * 1/8 Polycarbonate - Clear SQ. FT lb/ft P 1/4 Polycarbonate - Clear SQ. FT lb/ft P 1/4 Polycarbonate - Light Smoked SQ. FT lb/ft P * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. minimum charge of 1/8 of the standard panel size will apply. Polycarbonate Panels Wire mesh provides a high level of security and can be used for safety guarding and enclosures. Provides a smooth, snag-free surface that is extremely rust and corrosion resistant. Flat welded steel wire with fuse-bonded PVC coating. Maximum Size 4' x 8' Wire Mesh * Description Wire Gage Unit Weight Part # 1/2 x 1/2 lack 16 SQ. FT lb/ft P 1 x 1 lack 12 SQ. FT lb/ft P 1 x 1 Yellow 12 SQ. FT lb/ft P 1½ x 1½ lack 12 SQ. FT lb/ft P 2 x 2 lack 12 SQ. FT lb/ft P * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. minimum charge of 1/8 of the standard panel size will apply. Panels & ccessories TRESP is a solid grade decorative building panel, suitable for horizontal surfaces and vertical panels. Resistant to scratches, corrosives and solvents. * Thermosetting resins, homogeneously reinforced with cellulose fibers. Non-toxic, asbestos free, has good fire retarding characteristics. Finished on both sides. Maximum Size 6.1' x 8.37' TRESP Panels Thickness Weight Part # (in) (lb/ft 2 ) lack Grey lue White (1/4 ) P P P P (5/16 ) P P P P P P * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. minimum charge of 1/8 of the standard panel size will apply. 75 Parker Hannifin Corporation

4 Panels Expanded PVC Light duty colored panel material, primarily for use vertically. Can also be used as light duty shelving material. Rigid expanded foam polyvinyl chloride (PVC) UL Recognized Maximum Size 4' x 8' * 1/4" Expanded PVC - lack SQ. FT lb/ft P 1/4" Expanded PVC - lue SQ. FT lb/ft P 1/4" Expanded PVC - Red SQ. FT lb/ft P 1/4" Expanded PVC - White SQ. FT lb/ft P * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. minimum charge of 1/8 of the standard panel size will apply. S Rigid colored panel material used for both vertical and horizontal panels. One side is smooth, and the other side is textured. crylonitrile butadiene styrene Maximum Size 4' x 8' * 1/4" S - lack SQ. FT. 1.4 lb/ft P 1/4" S - White SQ. FT. 1.4 lb/ft P * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. minimum charge of 1/8 of the standard panel size will apply. luminum Honeycomb These panels have a very high strength to weight ratio. The panels have thin aluminum skins on each side with a light weight honeycomb core in the center. These panels can be used in all types of applications from walls to shelves. Skins T6 nodized luminum Maximum Size: Clear, lue and White - 4' x 8' lack " x 95.5" * 1/4" luminum Honeycomb - lack SQ. FT. 1.1 lb/ft P 1/4" luminum Honeycomb - Clear SQ. FT. 0.7 lb/ft P 1/4" luminum Honeycomb - lue SQ. FT. 0.7 lb/ft P 1/4" luminum Honeycomb - White SQ. FT. 0.7 lb/ft P * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. minimum charge of 1/8 of the standard panel size will apply. lack style has a finished dimension of 47.5" x 95.5" 76 Parker Hannifin Corporation

5 Panel Mounting ± (1.5" Series) Insert Multilock and rotate 90 to lock. T T + 3/4" Multiblock 1.5" Series 1/4" Panel 0.12" 0.04" 3/8" Panel 0.02" 0.04" 0.39" 0.39" Standard Configuration 1/4" Panel 0.59" 0.09" 0.04" 1/4" Panel 0.79" Max Load at 90 to T-Slot Dimensions (in) 56 Lbs 3" - 5" 20" - 40" Dimensions are a recommended range and depend on the size of the panel. 0.31" 0.59" lternate Configurations* 0.33" * "L" shaped piece can be removed and turned over for different spacings on only. 0.16" 0.93" Versatile block for mounting panels and screens. The block locks into the T-slot at a 90 position with an offset design to suit various panel thicknesses. Movable captive nut provides larger alignment range for locating through holes in panels. Glass Filled Nylon, lack Square Steel 1/4-20 Nut, Zinc Plated Multiblock P 1.5", 1/4-20 Each 0.21 oz Uniblock 1.5", 1/4-20* Each oz " 0.26" 0.79" 0.20" " Series Panels & ccessories * 6mm (1/4") panels only, no offset 1/4" Panel 0.04" T 0.25" T + 1/2" 1 Versatile block for mounting panels and screens for the 1" series. The block locks into the T-slot at a 90 position. Movable captive nut provides larger alignment range for locating through holes in panels. Glass Filled Nylon, lack Square Steel 1/4-20 Nut, Zinc Plated 0.23" 0.43" 0.16" 0.16" 0.48" 0.09" 0.98" Multiblock P 1", 1/4-20 Each 0.14 oz " 0.75" 0.55" 0.73" Parker Hannifin Corporation

6 Wire Mesh Retainers Deluxe ack Plate included but not shown on dimension drawings. H G E D J K H L I F G C ack Plate included but not shown on dimension drawings. E Deluxe retainers are used to securely fasten wire mesh within the T-slot. luminum, lack nodized 5/16-18 HCS included to secure back plate to retainer. Recommended Fastening Hardware (Order Separately) 1.5" Series Screws 5/16-18 x 5/8" [ ] T-Nuts ny 1.5" Series 5/16 [25-002, , ] 1" Series Screws 1/4-20 x 3/8" [ ] T-Nuts ny 1" Series 1/4 [25-031, , ] J K L F D C Dimensions (in) Wt. Style C D E F G H I J K L (lbs) Part # Single Double Single Double Economy ack Plate included but not shown on dimension drawings. Economical solution for securely fastening wire mesh to 1.5" Series profiles. 0.47" 0.06" Steel, Zinc Plated 1/4-20 HCS included to secure back plate to retainer. 2.51" Ø0.28" 0.24" Economy Wire Mesh Retainer Each 0.13 lb Parker Hannifin Corporation

7 Panel ccessories 1.5 Mesh Clamp Captures wire mesh panels up to 7/32" thick. Excellent for constructing safety guards when wire mesh does not need to be removable. Installation into 1.5" Series profiles is accomplished without fasteners by pressing into T-slot. Support stanchion becomes integral part of panel frame. Length=-1/16"(0.0625) Length = - 1 5/16" (1.3125) Flat ar 1/8" x 1/2" 1/4-20" x 1/4" Set Screw [ F] Weight luminum, Clear nodized 0.36 lb/ft * Wire Mesh Size: - 1/4" &-1/4" 7" TYP Profile is tapped every 7". Includes 1/8" x 1/2" aluminium clamp strip and (1) 1/4-20" x 1/4" Flat Point Set screw per tapped hole. 0.62" 0-7/32" Description Unit Part # Mesh Clamp Cut off max 156" (13') *Saw cut necessary for cut to length Standard fastener position is critical to avoid interference with the mesh clamp. 0.08" 0.70" 0.31" Extrusion for mounting 1.34" (34mm) thick insulated panels (available by special order) onto 1.5" series profiles. Extrusion can be serviced to mount on profile using T-nuts. Weight luminum, Clear nodized 0.32 lb/ft Insulated Panel Panel Extrusion [12-018] 1/4"-20 x 1/2" FHCS [ ] 1/4" T-Slot Nut [25-001] 1.5" Series Profile Panel Extrusion 1.50" 1.34" 0.61" Panels & ccessories Description Unit Part # Panel Extrusion Cut off 240" (20') * Saw cut necessary for cut to length " 0.31" Stiffener/Handle Designed as a combination handle and stiffener for sliding panel doors 1/4" thick. Panels snap into the profile slot and may be additionally secured by an adhesive or fastener. 0.23" 0.75" Weight luminum, Clear nodized 0.30 lb/ft Stiffener/Handle [12-011] Description Unit Part # Stiffener/Handle Profile Cut off max. 120" (10') *Saw cut necessary for cut to length " 0.44" 0.09" Parker Hannifin Corporation

8 Panel Extrusions Sliding Door Guide " 1.5 Series 1.14" 1" Series Sliding Door Guide Upper 0.67" 0.08" TYP 0.28" TYP ny Panel (up to 1/4") " R0.08" 1.14" 0.39" Stiffener/Handle [12-011] Sliding Door Guide Lower " 1.24" 1.5" Series 1" Series Removable = - 9/16" = - 9/16" Non-removable = - 3/8" = - 7/16" *Designed for panels up to 1/4 (6.4mm) 0.65" 0.10" TYP 0.28" TYP " 0.35" 1.24" 0.75" 0.06" 0.65" 0.06" TYP 0.29" TYP Series 0.42" R0.08" 0.75" To guide light duty panels as sliding windows and access ports for safety guards and enclosures. Installation onto 1.5" or 1" Series Profiles is accomplished without fasteners by snapping into t-slot. Design of lower guide reduces friction of sliding panels. Design of upper guide facilitates easy, liftout removal of panel without disassembly of structure. Weight L, Clear nodized 0.30 lb/ft L, Clear nodized 0.34 lb/ft High Impact PVC, lk 0.12 lb/ft High Impact PVC, lk 0.16 lb/ft L, Clear nodized 0.10 lb/ft L, Clear nodized 0.09 lb/ft Description Unit Part # Sliding Door Guide 1.5", L, Upper Cut off max. 120" (10') Sliding Door Guide 1.5", L, Lower Cut off max. 120" (10') Sliding Door Guide 1.5", PVC, Upper Cut off max. 120" (10') Sliding Door Guide 1.5", PVC, Lower Cut off max. 120" (10') Sliding Door Guide 1", L, Upper Cut off max. 120" (10') Sliding Door Guide 1", L, Lower Cut off max. 120" (10') *Saw cut necessary for cut to length Parker Hannifin Corporation

9 Rolling Doors 1.5" Series Profile Open ngled Handle [23-070] Guide Insert [21-073] Fastening See Detail " Rolling Door Guide 2.60" 2.36" 3X 0.39" 1/4" (6mm) Panel Vinyl Panel Gasket [12-106] T-Slot 8 C 0.83" 0.47" 0.24" T-Slot 10 5/16" 1 Rolling Door Guide Profile [12-022] Door Framed by 32x18 i-slot [12-032] 2 Roller Insert [21-075] 0.93" 0.50" 2.00" 1.00" 1.625" Standard Fastening Set [25-003] 4 Flat Plate Connector [20-028z1] Drill & Tap 1/4-20" x 5/16" Deep On Center 1/4"-20 x 3/8" HCS [ ] * Recommend fastener every 10" 1/4-20 x 5/8" Set Screws 0.38" 0.96" Connection Method 1 OR Leave 1/4" for Clearance for Std. Fastener 0.79" Connection Method 2 Mill ack Tab 1/4" 2 Length of vertical door member: = " For 1/4" Panel with panel gasket [12-106]: C (panel height) = " For 5/16" Panel without gasket: C (panel height) = " 3-4 Connection methods for assembling the door guide to 1.5" series profiles " Gap 0.07" Gap 1/4-20" Econ. T-Nut [20-093] Opt. Spring [ ] 0.71" Panels & ccessories 2.05" 1.57" 1.5 Excellent solution for larger doors. Roller system allows the doors to slide easily Profile luminum, Clear nodized (1.20 lb/ft) UHMW Guide Profile UHMW White Guide Insert UHMW White Includes (2) 1/4-20 x 5/8" Set Screws [ U] Roller Insert Roller (Delrin lack), Housing (luminum, Clear nodized), Pin (Stainless) (Includes (2) 1/4-20 x 9/16" SHCS [ ], (2) Offset 1/4-20 T-Nuts [20-193], and (2) Springs [ ] 0.38" 1/4-20 x 9/16" SHCS [ ] Ø1.00" 0.39" 0.39" Description Unit Part # 0.96" Rolling Door Guide Cut off max. 156" (13') UHMW Guide Profile Cut off max. 120" (10') *Saw cut needed for cut to length " 0.54" Guide Insert Set 1 Set Roller Insert Set 1 Set Parker Hannifin Corporation

10 ifold Doors ifold Door Glides 5/16-18 x 3/4" FHCS Spacer Door Glide Washer Tap 5/16-18 x 3/4" deep 1.5" Series C D 1/4-20 x 3/4" FHCS Spacer E Door Glide Washer F Tap 1/4-20 x 3/4" deep " Series ifold doors are used in very confined areas. Door glides allow rotational and sliding motion at the top and bottom of a vertical member within a permitted bifold door frame. Two glides (one top and one bottom) are required per door. Door Glide UHMW Spacer Steel, Zinc Plated Washer Steel, Zinc Plated * Ships complete with 2 glides, 2 screws, 2 spacers and 2 washers. Dimensions (in) Part # C D E F thru c'sink.750 x thru c'sink.563 x thru c'sink.563 x 82 Use the following chart to help select the correct part for your application. Frame Series Door Series 1.5 Series 1.5 Series 1.5 Series 1 Series 1 Series 1 Series Glide Part # Parker Hannifin Corporation

11 ifold Doors Design Examples ifold Door Glides Examples consider the hinges to be medium duty plastic hinges (page 66). Other hinges can be used and dimensions would only be slightly affected. To determine the width of the narrow door, subtract the sum of the door gaps and 1.885" from the frame's inside width dimension, then divide by 2. Example: ( ) = " Design Example for 1.5" ifold Door 26.00" 0.07" 0.07" 0.375" = " 29.44" 33.00" To determine the width of the wide door, add 1.885" to the width of the narrow door. Example: = To determine vertical door dimension, subtract clearance required for guides and washers (0.56") from the vertical opening dimension. Example: = " 11.80" 13.69" Design Example for 1" ifold Door Panels & ccessories To determine the width of the narrow door, subtract the sum of the door gaps and 1.430" from the frame's inside width dimension, then divide by " 26.00" 0.18" 0.18" 0.250" Example: ( ) = = To determine the width of the wide door, add 1.430" to the width of the narrow door " 29.44" 32.00" Example: = To determine vertical door dimension, subtract clearance required for guides and washers (0.56") from the vertical opening dimension. Example: = " 11.98" 13.41" * When using 1" Series for the doors and 1.5" Series for the frame, use the design example for 1" Series. 83 Parker Hannifin Corporation

12 Mounting ccessories T-Clips F C D Cable/Hose Holder E For #8-32 SHCS 0.63" Mounting element with two separate channels for fast, easy securing and routing of open wiring or tubing. Glass Filled Nylon, lack Order all mounting hardware separately except where noted. Range Dimensions (in) (in) C D E F Part # 5/32-1/ * 1/4-5/ * 5/16-3/ z1 3/8-1/ z1 1/2-5/ z1 5/8-3/ z1 3/4-7/ z1 7/ z1 * & come complete with an M3 (metric) screw and special "Zn" nut for mounting on 1.5" profiles only. 0.31" 1.54" 0.63" 1.57" 0.79" 0.47" 0.79" 1.5 Mounting element with two separate channels for routing open wiring or tubing of various sizes along the profiles or other surfaces. Glass Filled Nylon, lack Complete with #8-32 Screw and #8-32 economy T-Nut for 1.5" Series No hardware required Cable Tie Holder Cable/Hose Holder - Screw Type Each 0.28 oz Cable/Hose Holder - 1/4 Turn Each.28 oz Mounting element for fast securing using cable ties. 0.36" 0.75" Glass Filled Nylon, lack " 0.75" Cable Tie Holder Each 0.14 oz Parker Hannifin Corporation