INTERIOR. Click on a category: Collections» Wall» Door core» Raw boards» Ready to paint» Shelves» ClicBox»

Transcription

1 INTERIOR Click on a category: Collections» Wall» Door core» Raw boards» Ready to paint» Shelves» ClicBox»

2 INTERIOR COLLECTIONS

3 Evola So lifelike, so full of character Glide your finger across the surface of Evola and you ll notice it immediately. This collection of innovative interior design products aims not only to be beautiful and lifelike, but also to feel totally genuine and authentic. The perfection is in the detail. By working with realistic, embossed structures and varying degrees of gloss for the finish, we have developed the most harmonious and lifelike designs ever. And this is all done entirely in-house, meaning that Evola meets the high quality requirements that you expect from UNILIN. Evola consists of wood designs, plain colours and some very realistic concrete and metallic designs that capitalise on current trends in contemporary interior design. With Evola, we provide the perfect answer to the demands from interior architects and interior designers for high-quality, durable and affordable products. All Evola designs are available in melamine faced board, HPL (high pressure laminate) and matching edge-banding, including a number of designs featuring an innovative synchronised surface structure. Most durable, scratch resistant, colourfast and low-maintenance decorative panelling.

4 Technical specifications Support melamine faced board from stock P2 chipboard Dimensions (mm) 2800x2070 melamine faced chipboard 3050x1300 High Pressure Laminate (HPL) Available from stock 35 designs available from stock in 18 mm and 19 mm Surface finishes Minnesota Oak (Z5L), Royal Oak (V8A), Heritage Oak (V9A), Deepwood (W04), Metallic (M01), Topmat (BST) ABS edging tape Matching ABS edging tape 1 mm (75 m/rl), width 23 mm This collection is also available on other thicknesses and other supports such as MDF, moisture-resistant or fire-retardant chipboard upon request. References For more information, consult our Evola brochure on the website UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke info.panels@unilin.com / 13/01/2016

5 Formica Unilin 2 great brands, one common path Formica and Unilin stride ahead together with the Formica Unilin collection, a full set of materials with a shared range of designs and textures for architects and designers, bringing all interior projects to life. Together these materials offer solutions for all types of applications: Formica High Pressure Laminate (HPL): for demanding horizontal and vertical applications in areas subject to high wear and impact and in environments with high humidity. Unilin MFC (Melamine Faced Boards): for furniture, verticals and other interior applications. A complete range of matching edging tape guarantees a perfect finish of your project.

6 Technical specifications Support melamine faced board from stock P2 chipboard Dimensions (mm) 2800 x 2070 melamine faced chipboard 3050 x 1300 High Pressure Laminate (HPL) Available from stock 103 designs available from stock in 18 mm and 19 mm Surface finishes Linewood (W03), Soft Pearl (CST) and Topmat (BST) ABS edging tape Matching ABS edging tape 1 mm and 2 mm (75 m/rol), width 23 mm Melamine edging tape Matching melamine edging tape 0,35 mm preglued (50 m/rl) and unglued (100 m/rl), width 23 mm This collection is also available on other thicknesses and other supports such as MDF, moisture-resistant or fire-retardant chipboard upon request. References For more information, consult our Formica Unilin brochure on the website UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke info.panels@unilin.com / 13/01/2016

7 Essentia The essence of interiors A strong collection with unique decors and dimensions for unique interiors. The 32 contemporary designs of the Essentia collection are ideal for finishing of all kinds of interior projects. This commercial collection consists of in-house designed wood decors, fantasy designs and plain colours that can be used in combination or stand-alone. Furthermore, the decors are standard available in different dimensions.

8 Technical specifications Support stock range P2 chipboard Dimensions (mm) 2500 x x x 1250 (on order) Available from stock All 32 decors are available from stock in 8 and 18 mm Surface finishes Linewood (W03), Soft Pearl (CST), Pearl (TST) and Topmat (BST) ABS edging tape Matching ABS edging tape 1 mm (75m/roll), width 23 mm Melamine edging tape Matching melamine edging tape 0,35 mm preglued (50 m/roll) This collection is also available on other thicknesses and other supports such as MDF, moisture-resistant or fire-retardant chipboard upon request. For more information, consult our Essentia brochure on the website UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke info.panels@unilin.com / 13/01/2016

9 INTERIOR WALL

10 ClicWall Seamless MDF walls with an instant finish ClicWall is UNILIN s revolutionary MDF wall-covering system with patented Uniclic technology. The panels click together simply and easily, making ClicWall up to five times quicker to install than more traditional wall covering materials. What is more, a seamless result is obtained and the wall has an instant, long-lasting finish. ClicWall is available in more than 80 designs, with ClicWall Deco offering the opportunity for the finish of your choice: paint, wallpaper or digital print. - Walls - EI 60 separating wall Characteristics 1H Fire retardant (ClicWall FR) PATENTED TECHNOLOGY

11 ClicWall ClicWall is particularly suitable for use as a concealment panel or partition wall, and is mounted on an aluminium or wooden substructure by screwing, gluing or stapling them into place and by clicking the panels together. ClicWall realises in a specific setup a fire resistance of one hour (EI 60) and a acoustic value of 52dB. The reaction to fire of the individual ClicWall FR panels has obtained European classification B-s2-d0. Technical specifications For technical specifications and instructions for use, see Available dimensions and thicknesses 2785 x 618 x 10 mm (gross) 2785 x 600 x 10 mm (net) Depending on the volume purchased, alternative dimensions can be provided with a maximum height of 3050 mm and a maximum width of 1000 mm. Certificates UNILIN Division Panels is actively committed to sustainable forest management. ClicWall is available on demand with PEFC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

12 Courtesy of Beddeleem NV Antivlam Class 0 Powerfully fire-retardant chipboard for applications in dry environments The addition of halogen-free phosphate salts means that Antivlam Class 0 chipboard meets the stringent Class 0 British Standard and the Wheelmark certificate standards. Fires in this powerfully fire-retardant chipboard go out by themselves and the board does not continue to glow after the source of heat has been taken away. What is more, Antivlam Class 0 retains its mechanical strength for an extremely long time in situations involving fire. Antivlam Class 0 must be used in service class 1 (limitations in terms of temperature and atmospheric humidity), and is only suitable for biological hazard class 1 of EN Standard The boards must be carefully protected from all direct contact with water. - Walls - Interior Characteristics P 2 Product class P2 Fire retardant

13 Antivlam Class O Antivlam Class 0 chipboard is ideal for situations in which low reactivity to fire and flame spread is an absolute must (stairwells, exit routes, lift shafts, corridors etc.). Antivlam Class 0 also offers an excellent solution for applications with higher resistance to fire, for example in fire doors or firewalls. The highly fire-retardant chipboard is particularly popular for use in public buildings and has the Wheelmark certificate that is often required for maritime applications. Always use suitable tools when sawing, milling or drilling Antivlam Class 0 boards. Fire-retardant products may cause deposits on tools and shorten service life. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Moisture level EN 322 % 6-10 Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² Internal bond EN 319 N/mm² 0,40 0,35 0,35 Bending stiffness EN 310 N/mm² Surface soundness EN 311 N/mm² 0,80 0,80 0,80 Reaction to fire EN B-s2, d0 Antivlam Class 0 meets the general requirements and comes under formaldehyde emission class E1 as described in Table 1 of EN Standard 312. Available dimensions and thicknesses Antivlam Class 0 is available from stock in a range of dimensions and thicknesses. Consult the complete UNILIN, division panels stock range at Thanks to our high-capacity saws, UNILIN, division panels can cut to most sizes within the machine s capabilities. Contact our sales team or info.panels@unilin.com for information on any other formats. Certificates UNILIN Division Panels is actively committed to sustainable forest management. Antivlam Class 0 is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

14 Courtesy of Beddeleem NV Antivlam Fire-retardant chipboard for use in dry environments The addition of halogen-free phosphate salts gives the MUF-glued Antivlam chipboard powerful fire-retardant characteristics (European classification B-s1, d0). Fires in Antivlam go out by themselves and the boards do not continue to glow after the source of heat has been taken away. What is more, Antivlam chipboard retains its mechanical strength for a long time in the event of a fire. Antivlam must be used in service class 1 (limitations in terms of temperature and atmospheric humidity), and is only suitable for biological hazard class 1 of EN Standard Direct contact with water is to be avoided at all times. - Walls - Floors - Interior Characteristics P 2 Product class P2 Fire retardant B-s1,d0 T&G Tongue-and-groove joints (optional)

15 Antivlam Antivlam chipboard is suitable for applications where low reactivity to fire and flame spread is essential (stairwells, exit routes, lift shafts, corridors etc.). Antivlam also offers an excellent solution for applications with higher resistance to fire, such as the core of fire doors or as a firewall. The fire-retardant chipboard is mainly used in public buildings such as hospitals, airports, retirement homes, theatres, hotels etc. An optional finish with tongue-and-groove joints means that Antivlam is also suitable for use as a subfloor in dry environments. These panels can also be used in vertical applications. Always use suitable tools when sawing, milling or drilling Antivlam boards. Fire-retardant products may cause deposits on tools and shorten service life. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Moisture level EN 322 % Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² ,5 Internal bond EN 319 N/mm² 0,4 0,4 0,35 0,35 0,35 0,3 Bending stiffness EN 310 N/mm² Surface soundness EN 311 N/mm² 0,8 0,8 0,8 0,8 0,8 0,8 Reaction to fire EN B-s1,d0 Antivlam meets the general requirements and comes under formaldehyde emission class E1 as described in Table 1 of EN Standard 312. Available dimensions and thicknesses Antivlam is available from stock in various finishes, thicknesses and dimensions. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. Antivlam is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

16 Stellwand Chipboard with tongue-and-groove joints, for stand-building and shop furnishings Stellwand chipboard has a tongue-and-groove profile along the long sides. Along with the intrinsic strength of the board, this system makes Stellwand an excellent solution for stand-building and shop furnishings. This board is suitable for applications in service class 1 (limited temperature and atmospheric humidity) and exclusively those in biological hazard class 1 of EN Standard Walls Characteristics P 2 T&G Product class P2 Tongue-and-groove joints TopFinish or sanded (optional)

17 Stellwand Stellwand is ideal for stand building and shop fitting. The tongue-and-groove profile allows the boards to be turned in relation to each other, which makes quick installation possible. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Moisture level EN 322 % Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² Internal bond EN 319 N/mm² 0,35 0,35 Bending stiffness EN 310 N/mm² Surface soundness EN 311 N/mm² 0,80 0,80 Stellwand comes under formaldehyde emission class E1 and meets the general requirements as described in Table 1 of EN Standard 312. Available dimensions and thicknesses Stellwand is available on demand and can be made-to-order. For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. Stellwand is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

18 INTERIOR DOOR CORE

19 Courtesy of Beddeleem NV Air 400 Light Ultra-light chipboard for interior door cores Air 400 Light is extremely light chipboard with a fine, sanded surface and a different density to the Air 400. This chipboard is perfectly suited for non-load bearing use in dry environments. It is suitable for applications in service class 1 (limited temperature and atmospheric humidity) and exclusively in biological hazard class 1 of EN Standard Doors Characteristics Lightweight

20 Air 400 Light Tests by Warrington Fire (Belgium) and Effectis (France) have demonstrated that the Air 400 Light is particularly suitable for use as a core for interior doors with a fire resistance of 30 to 60 minutes. The light weight of the carrier board demands less of the hinges than other, heavier board material. The result is a door that is sturdy but light, with minimal distortion in a fire. The ultra-light Air 400 Light boards are also suitable for building stands. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm ,5 Density EN 323 kg/m ³ 430 +/-5% 430 +/-5% 430 +/-5% Moisture level EN 322 % Technical characteristics + Standard Unit 5/95 percentile values Bending strength EN 310 N/mm ² 2,5 2,0 2,0 Internal bond EN 319 N/mm ² 0,17 0,14 0,14 Bending stiffness EN 310 N/mm ² Air 400 Light comes under formaldehyde emission class E1 and meets the general requirements described in Table 1 of standard EN312. The thickness tolerance (of the sanded board) deviates from this standard and is defined more strictly at +/-0.2 mm. Available dimensions and thicknesses Air 400 Light is available on demand and can be made to order. For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. Air 400 Light is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

21 Courtesy of Beddeleem NV Air 400 Ultra-light chipboard for interior door cores Air 400 is an extremely light type of chipboard with a fine, sanded surface. The chipboard is perfectly suited for non-load bearing use in dry environments. It is suitable for applications in service class 1 (limited temperature and atmospheric humidity) and exclusively in biological hazard class 1 of EN Standard Doors Characteristics Lightweight

22 Air 400 Tests by Warrington Fire (Belgium) and Effectis (France) have demonstrated that the Air 400 is particularly suitable for use as a core for interior doors with a fire resistance of 30 to 60 minutes. The light weight of the carrier board demands less of the hinges than other, heavier board material. The result is a door that is sturdy but light, with minimal distortion in a fire. The ultra-light Air 400 boards are also suitable for building stands. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Density EN 323 kg/m ³ 470 +/-5% 470 +/-5% 470 +/-5% Moisture level EN 322 % Technical characteristics + Standard Unit 5/95 percentile values Bending strength EN 310 N/mm ² 2,0 2,0 2,0 Internal bond EN 319 N/mm ² 0,14 0,14 0,14 Bending stiffness EN 310 N/mm ² Air400 falls under formaldehyde emission class E1 and complies with the general requirements as described in Table 1 of the EN 312 standard. The thickness tolerance (sanded) is more strictly defined than in the standard at mm. Available dimensions and thicknesses Air400 is available on demand and can be made to order. For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. The Air 400 is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

23 Courtesy of Beddeleem NV FD90 Door core with 90-minute fire resistance. FD90 door cores consist of two high-quality, fire-retardant Antivlam chipboard layers (P2-EN312) with a thickness of 27 mm. The two Antivlam boards need to be glued together (Unilin can do this for you, or you can do it yourself) using a highly heat-resistant polyurethane glue. The result is a very stable, 54mm door core with a smooth surface and three high-density layers. The boards have a finely sanded surface and a strong, screwable core. Fire-retardant products may cause deposits on tools and shorten service life. - Doors Characteristics Fire retardant

24 FD90 FD90 door cores have a greatly increased fire resistance when exposed to heat and flames. Antivlam boards have a strong fire-resistant and insulating effect and only have to be 54 mm thick to achieve a fire resistance of more than 90 minutes. The boards must be applied in service class 1 (limitations in terms of temperature and atmospheric humidity), and are only suitable for biological hazard class 1 of EN Standard FD90 door cores form the ideal basis for the production of fire doors where a fire resistance of more than 90 minutes is required. Fire doors with a FD90 core are particularly suitable for use in public buildings such as hospitals, airports, homes for the elderly, theatres, hotels and offices. They can be finished with paper, melamine, laminate or lacquer. Available dimensions and thicknesses The FD90 hinge door component was tested at a breadth of 950 mm and a height of 2200 mm. There are no limits on the permissible reduction in size. FD90 is available on demand in the format 915 x 2100 mm. For our technical capabilities on custom dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates FD90 fire door cores are tested in accordance with the EN and BS standards, and have a guaranteed fire resistance of more than 90 minutes. Furthermore, Antivlam is classified as B-s2,d0, in accordance with the European reaction to fire standard EN UNILIN, division panels Ingelmunstersteenweg Oostrozebeke - Belgium info.panels@unilin.com / 25/02/2014

25 INTERIOR RAW BOARDS

26 Liso Basic board for general applications in dry environments Liso chipboard is a standard solution for general applications in dry environments. This board is suitable for use in service class 1 (limited temperature and atmospheric humidity), and can only be used in biological hazard class 1 of EN Standard Interior - Packaging - Concrete formwork Characteristics P 1 Product class P1 TopFinish of sanded

27 Liso Liso chipboard with a sanded surface can be finished with melamine, finishing foil, lacquer, veneer and laminate. These boards are a robust solution for non-load bearing applications including packaging and interior fittings. With a TopFinish surface, Liso can also be used as single use formwork. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Moisture level EN 322 % Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² 10,5 10,5 10, Internal bond EN 319 N/mm² 0,28 0,28 0,28 0,24 0,24 0,24 0,24 0,20 Liso meets the general requirements and comes under formaldehyde emission class E1 as described in Table 1 of EN Standard 312. Finish Liso is available with both a sanded surface and a TopFinish surface. The heat-treated TopFinish surface (TF) creates an extra-hard, sealed surface with greater impact resistance, which is easy to clean. This means that boards with a TopFinish surface are particularly suitable for building applications such as concrete formwork. A fine, sanded surface (S) is recommended if the Liso board is going to receive an additional finish of melamine, finishing foil, lacquer, veneer or laminate, as is often the case in interior applications. Available dimensions and thicknesses Liso is available from stock. Consult the complete UNILIN Panels stock range at For our technical possibilities in terms of different thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. Liso is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

28 BelSpan P2 High-quality chipboard for interior and furniture applications BelSpan P2 panels have a strong, screwable core and are perfectly suited to industrial processing for furniture and interior design. The board is suitable for applications in service class 1 (limited temperature and atmospheric humidity), and can only be used in biological hazard class 1 of EN Standard Interior - Packaging Characteristics P 2 Product class P2

29 BelSpan P2 BelSpan P2 chipboard can easily be finished with melamine, finishing oil, lacquer, veneer or laminate. This is the reason why the boards are excellent for interior applicatinos and furniture production. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Moisture level EN 322 % Technical characteristics + Standard 5/95 Percentile values Bending strength EN 310 N/mm² 11,0 11,0 11,0 11,0 11,0 11,0 11,0 10,5 10,5 9,5 8,5 Internal bond EN 319 N/mm² 0,40 0,40 0,40 0,35 0,35 0,35 0,35 0,30 0,30 0,25 0,20 Bending stiffness EN 310 N/mm² Surface soundness EN 311 N/mm² 0,80 0,80 0,80 0,80 0,80 0,80 0,80 0,80 0,80 0,80 0,80 BelSpan P2 comes under formaldehyde emission class E1 and meets the general requirements as described in Table 1 of EN Standard 312. Finish BelSpan P2 is available as standard with a fine, sanded surface that is particularly suited to finishing with melamine, finishing foil, lacquer, veneer or laminate. Available dimensions and thicknesses BelSpan P2 is available from stock in various finishes, thicknesses and dimensions. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. BelSpan is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

30 BelSpan P4 High-quality chipboard for loadbearing interior and furniture applications. BelSpan P4 panels have a strong, screwable core and are perfectly suited to industrial processing for furniture and interior design. BelSpan P4 can also be used for load-bearing applications and has more robust technical characteristics than BelSpan P2 chipboard. The board is suitable for applications in service class 1 (limited temperature and atmospheric humidity), and can only be used in biological hazard class 1 of EN Standard Interior - Packaging Characteristics P 4 Product class P4 Structural applications

31 BelSpan P4 BelSpan P4 chipboard can easily be finished with melamine, finishing oil, lacquer, veneer or laminate. This is the reason why the boards are excellent for interior applicatinos and furniture production. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Moisture level EN 322 % Technical characteristics + Standard 5/95 Percentile values Bending strength EN 310 N/mm² Internal bond EN 319 N/mm² 0,40 0,35 0,35 0,35 0,30 Bending stiffness EN 310 N/mm² Swelling/24h EN 317 % BelSpan P4 comes under formaldehyde emission class E1 and meets the general requirements as described in Table 1 of EN Standard 312. Finish BelSpan P4 is available as standard with a fine, sanded surface that is particularly suited to finishing with melamine, finishing foil, lacquer, veneer or laminate. Available dimensions and thicknesses BelSpan P4 is available on request and can be made to order. For our technical capabilities on custom thicknesses, dimensions and finishes, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. BelSpan P4 is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

32 Hydrolis Moisture-resistant chipboard Hydrolis is an MUF-glued, moisture-resistant chipboard, suitable for industrial processing in furniture and interior applications. This board only displays minimal expansion and swelling under the influence of high atmospheric humidity. These boards are easy to saw and particularly suitable for applications in service class 2 (limited temperature and atmospheric humidity) and biological hazard classes 1 and 2 of EN Standard Interior - Packaging Characteristics P 3 Product class P3 Moisture-resistant

33 Hydrolis Hydrolis chipboard is suitable for non-load bearing applications in a damp environment. A perfect finish can be given to the boards with paper, melamine, veneer or laminate. This is one reason why they are ideal for interior applications and furniture production. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Moisture level EN 322 % Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² Internal bond EN 319 N/mm² 0,45 0,45 0,45 0,45 0,40 Bending stiffness EN 310 N/mm² Swelling/24h EN 317 % Internal bond after cyclic test EN N/mm² 0,15 0,15 0,13 0,13 0,12 Swelling after cyclic test EN % Hydrolis meets the general requirements and comes under formaldehyde emission class E1 as described in Table 1 of EN Standard 312. Finishes Hydrolis is available as standard with a fine, sanded surface that is perfectly suitable for further finishing. Available dimensions and thicknesses Hydrolis is available from stock in various finishes, thicknesses and dimensions. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. Hydrolis is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

34 INTERIOR Durelis Moisture-resistant, multifunctional construction board Durelis is an MUF-glued, versatile, moisture-resistant chipboard suitable for load-bearing applications. As an excellent alternative to traditional OSB/3 boards, Durelis is suitable for applications in environments with a high atmospheric humidity level. Durelis unique composition ensures that swelling and linear expansion remain limited. These construction boards can be used in service class 2 (limited temperature and atmospheric humidity) and can only be used in biological hazard classes 1 and 2 of EN Standard Interior - Floors - Roofs - Walls - Concrete formwork Characteristics P 5 Product class P5 Structural Moisture-resistant TopFinish or sanded T&G Tongue-and-groove joints (optional)

35 Durelis Durelis can be used in both traditional housing construction and timber construction as a structural construction board for floors, roofs or walls. This board is also useful for non-load bearing applications, such as interior fittings in zones with a high atmospheric humidity. Furthermore, it works perfectly as single use or re-usable concrete formwork. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Moisture level EN 322 % Water vapour permeability µ EN (day cup) µ Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² Internal bond EN 319 N/mm² 0,45 0,45 0,45 0,45 0,45 0,45 0,45 0,40 0,40 0,40 Bending stiffness EN 310 N/mm² Swelling/24h EN 317 % Internal bond after cyclic test EN 321 option 1 N/mm² 0,25 0,25 0,25 0,22 0,22 0,22 0,22 0,20 0,20 0,20 Swelling after cyclic test EN 321 option 1 % Durelis meets the general requirements described in Table 1 of EN Standard 312 and comes under formaldehyde emission class E1. Finish Durelis is available with a sanded surface or a TopFinish surface. The heat-treated TopFinish surface (TF) creates an extra-hard, sealed surface with greater impact resistance, and it is easy to clean. The increased concentration of natural paraffin in the surface increases its moisture resistance. Our boards with a TopFinish surface also score highly for air tightness. These advantages mean that boards with a TopFinish surface are particularly suitable for building applications. A fine, sanded surface (SA) is recommended if the Durelis board is going to receive an additional finish of melamine, finishing foil, lacquer, veneer or laminate, as is often the case in interior applications. Durelis is available as standard with straight edges, but can also be finished with a tongue-and-groove system (TG). The toothed profile ensures high stability and simple installation. The system makes it possible to nail or screw the panels blind. Available dimensions and thicknesses Durelis is available from stock in various finishes, thicknesses and dimensions. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. Durelis is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

36 Antivlam Fire-retardant chipboard for use in dry environments The addition of halogen-free phosphate salts gives the MUF-glued Antivlam chipboard powerful fire-retardant characteristics (European classification B-s1, d0). Fires in Antivlam go out by themselves and the boards do not continue to glow after the source of heat has been taken away. What is more, Antivlam chipboard retains its mechanical strength for a long time in the event of a fire. Antivlam must be used in service class 1 (limitations in terms of temperature and atmospheric humidity), and is only suitable for biological hazard class 1 of EN Standard Direct contact with water is to be avoided at all times. - Interior - Floors - Walls Characteristics P 2 Product class P2 Fire retardant B-s1,d0 T&G Tongue-and-groove joints (optional)

37 Antivlam Antivlam chipboard is suitable for applications where low reactivity to fire and flame spread is essential (stairwells, exit routes, lift shafts, corridors etc.). Antivlam also offers an excellent solution for applications with higher resistance to fire, such as the core of fire doors or as a firewall. The fire-retardant chipboard is mainly used in public buildings such as hospitals, airports, retirement homes, theatres, hotels etc. An optional finish with tongue-and-groove joints means that Antivlam is also suitable for use as a subfloor in dry environments. These panels can also be used in vertical applications. Always use suitable tools when sawing, milling or drilling Antivlam boards. Fire-retardant products may cause deposits on tools and shorten service life. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Moisture level EN 322 % Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² ,5 Internal bond EN 319 N/mm² 0,40 0,40 0,35 0,35 0,35 0,30 Bending stiffness EN 310 N/mm² Surface soundness EN 311 N/mm² 0,80 0,80 0,80 0,80 0,80 0,80 Reaction to fire EN B-s1,d0 Antivlam meets the general requirements and comes under formaldehyde emission class E1 as described in Table 1 of EN Standard 312. Available dimensions and thicknesses Antivlam is available from stock in various finishes, thicknesses and dimensions. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. Antivlam is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

38 Antivlam Class 0 Powerfully fire-retardant chipboard for applications in dry environments The addition of halogen-free phosphate salts means that Antivlam Class 0 chipboard meets the stringent Class 0 British Standard and the Wheelmark certificate standards. Fires in this powerfully fire-retardant chipboard go out by themselves and the board does not continue to glow after the source of heat has been taken away. What is more, Antivlam Class 0 retains its mechanical strength for an extremely long time in situations involving fire. Antivlam Class 0 must be used in service class 1 (limitations in terms of temperature and atmospheric humidity), and is only suitable for biological hazard class 1 of EN Standard The boards must be carefully protected from all direct contact with water. - Interior - Floors - Walls Characteristics P 2 Product class P2 Fire retardant

39 Antivlam Class 0 Antivlam Class 0 chipboard is ideal for situations in which low reactivity to fire and flame spread is an absolute must (stairwells, exit routes, lift shafts, corridors etc.). Antivlam Class 0 also offers an excellent solution for applications with higher resistance to fire, for example in fire doors or firewalls. The highly fire-retardant chipboard is particularly popular for use in public buildings and has the Wheelmark certificate that is often required for maritime applications. Always use suitable tools when sawing, milling or drilling Antivlam Class 0 boards. Fire-retardant products may cause deposits on tools and shorten service life. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Density EN 323 % Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² Internal bond EN 319 N/mm² 0,40 0,35 0,35 Bending stiffness EN 310 N/mm² Surface soundness EN 311 N/mm² 0,80 0,80 0,80 Reaction to fire EN B-s2, d0 Antivlam Class 0 meets the general requirements and comes under formaldehyde emission class E1 as described in Table 1 of EN Standard 312. Available dimensions and thicknesses Antivlam Class 0 is available from stock in various finishes, thicknesses and dimensions. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. Antivlam Class 0 is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

40 INTERIOR HydroFlam Fire-retardant and moisture-resistant construction board for structural applications HydroFlam is an MUF-glued, fire-retardant chipboard that is extremely well suited to structural applications in damp spaces. The board only displays minimal expansion and swelling under the influence of high atmospheric humidity. HydroFlam has powerful fire-retardant characteristics (European classification B-s2, d0). Fires in the board go out by themselves and do not continue to glow after the source of heat has been taken away. What is more, HydroFlam retains its mechanical strength for a long time in situations involving fire. HydroFlam can be applied in both service class 1 and 2 (limited temperature and atmospheric humidity) and is suitable for biological hazard classes 1 and 2 of EN Standard Protection against direct contact with water is required. - Floors - Walls - Interior Characteristics P 5 Product class P5 Structural applications Fire retardant B-s2,d0 Moisture-resistant

41 HydroFlam HydroFlam is suitable as a structural board in applications where low reactivity to fire and flame spread are important (roofs, walls, stairwells, exit routes, lift shafts, corridors etc.) and where a higher resistance to fire is required (fire doors, fire walls etc.). Use the recommended tools when sawing, milling or drilling HydroFlam boards. Fire-retardant products may cause deposits on tools and shorten service life. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Moisture level EN 322 % Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² Internal bond EN 319 N/mm² 0,45 0,45 0,45 0,45 0,45 Bending stiffness EN 310 N/mm² Swelling/24h EN 317 % Internal bond after cyclic test EN 321 option 1 N/mm² 0,25 0,25 0,22 0,22 0,22 Swelling after cyclic test EN % Reaction to fire EN B-s2, d0 HydroFlam meets the general requirements and comes under formaldehyde emission class E1 as described in Table 1 of EN Standard 312. Available dimensions and thicknesses HydroFlam is available from stock in various thicknesses and dimensions. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. HydroFlam is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

42 BioSpan S0 P2 High-quality chipboard with extremely low formaldehyde emissions BioSpan P2 chipboard has a strong, screwable core and a fine, sanded surface. These boards are suitable for industrial processing in furniture and interior applications. BioSpan P2 is easily millable and has exceptionally low formaldehyde emissions, comparable to those of natural wood (<2 mg/100g dry matter). This board is suitable for applications in service class 1 (limited temperature and atmospheric humidity) and can only be used in biological hazard class 1 of EN Standard Interior Characteristics P 2 Product class P2 Low formaldehyde emissions

43 BioSpan S0 P2 BioSpan S0 P2 boards can easily be finished with melamine, finishing foil, lacquer, veneer or laminate. This is one reason why the boards are an excellent solution for interior applications and furniture production. Thanks to its low formaldehyde emissions, you will often find BioSpan S0 P2 in public environments where a lot of attention is paid to ecological building techniques, such as schools, hospitals, hotels etc. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Moisture level EN 322 % Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² 11,0 11,0 10,5 Internal bond EN 319 N/mm² 0,35 0,35 0,30 Bending stiffness EN 310 N/mm² Surface soundness EN 311 N/mm² 0,80 0,80 0,80 BioSpan S0 P2 meets the general requirements and comes under formaldehyde emission class E1 as described in Table 1 of EN Standard 312. Available dimensions and thicknesses BioSpan S0 P2 is available on demand and can be made to order. For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. BioSpan P2 is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

44 FibroMax High-end MDF board for industrial processing and interior applications in dry environments FibroMax is a high-density MDF board. FibroMax has an excellent sanding capacity and a well-sealed surface. These boards can be used in service class 1 (limited temperature and atmospheric humidity) and biological hazard class 1 of EN Standard Interior Characteristics MDF

45 FibroMax FibroMax is perfectly suited to interior finishes, furniture, stand-building and shop fitting. FibroMax is also an excellent choice for incorporation into skirting boards and profiles or as a non-load bearing wall. The high-quality surface of FibroMax can be finished with melamine, veneer, lacquer, paint, HPL or CPL. What is more, the MDF boards have a high-density core, ideal for all milling applications. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² Bending stiffness EN 310 N/mm² Internal bond EN 319 N/mm² 0,65 0,65 0,65 0,65 0,65 0,6 0,6 0,55 0,55 0,55 0,55 0,55 0,55 0,55 0,55 Swelling/24h EN 317 % FibroMax meets the general requirements of EN and comes under formaldehyde emission class E1. Available dimensions and thicknesses FibroMax is available from stock in various thicknesses and dimensions. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. FibroMax is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

46 FibroMax Air Universal, light MDF board for processing and interior applications in dry environments FibroMax Air is a low-density MDF board. FibroMax Air has an excellent sanding capacity and a well-sealed surface. These boards can be used in service class 1 (limited temperature and atmospheric humidity) and biological hazard class 1 of EN Standard Interior Characteristics L L-MDF Lightweight

47 FibroMax Air The versatile FibroMax Air board is perfectly suited to interior finishes, furniture, stand-building and shop furnishings. FibroMax Air also performs well as a non-load bearing wall or ceiling. The high-quality surface of FibroMax Air can be finished with melamine, veneer, lacquer, paint, HPL or CPL. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² Bending stiffness EN 310 N/mm² Internal bond EN 319 N/mm² 0,45 0,45 0,45 0,45 0,45 0,45 0,45 0,45 0,45 0,45 0,45 0,45 0,4 Swelling/24h EN 317 % FibroMax Air meets the general requirements of EN and comes under formaldehyde emission class E1. Available dimensions and thicknesses FibroMax Air is available from stock in various thicknesses and dimensions. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. FibroMax Air is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

48 FibroMax Paneelware High-end MDF board for industrial processing in dry environments - Interior De FibroMax Paneelware is een MDF-plaat met een uitstekende schuurkwaliteit en een goed verdicht oppervlak. De platen kunnen worden ingezet in serviceklasse 1 (beperkt in temperatuur en luchtvochtigheid) en in de biologische risicoklasse 1 van norm EN Characteristics L-MDF

49 FibroMax Paneelware FibroMax Paneelware is perfectly suited to interior finishes. Skirting boards and profiles are but two of the many applications for which FibroMax Paneelware is an excellent choice. The high-quality surface of FibroMax Paneelware can be finished with melamine, veneer, lacquer or paint. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² Bending stiffness EN 310 N/mm² Internal bond EN 319 N/mm² 0,45 0,45 0,45 Swelling/24 hours EN 317 % FibroMax Paneelware meets the general requirements and comes under formaldehyde emission class E1 as described in Table 1 of EN Standard Available dimensions and thicknesses FibroMax Paneelware is available on request and can be made to order. For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN, division panels is actively committed to sustainable forest management. FibroMax Paneelware is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

50 HydroMax High-end MDF board for industrial processing and interior applications in dry environments FibroMax is a high-density MDF board. FibroMax has an excellent sanding capacity and a well-sealed surface. These boards can be used in service class 1 (limited temperature and atmospheric humidity) and biological hazard class 1 of EN Standard Interior Characteristics L MDF.H Moisture resistant

51 HydroMax FibroMax is perfectly suited to interior finishes, furniture, stand-building and shop fitting. FibroMax is also an excellent choice for incorporation into skirting boards and profiles or as a non-load bearing wall. The high-quality surface of FibroMax can be finished with melamine, veneer, lacquer, paint, HPL or CPL. What is more, the MDF boards have a high-density core, ideal for all milling applications. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² Bending stiffness EN 310 N/mm² Internal bond EN 319 N/mm² 0,80 0,80 0,75 0,75 0,75 0,75 0,75 0,75 0,75 Swelling/24h EN 317 % Internal bond after cyclic test EN 321 option 1 N/mm² 0,30 0,25 0,20 0,20 0,20 0,20 0,15 0,15 0,15 Swelling/24h after cyclic test EN 321 option 1 % FibroMax meets the general requirements and comes under formaldehyde emission class E1 as described in Table 1 of EN Standard Available dimensions and thicknesses FibroMax is available from stock in various thicknesses and dimensions. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. FibroMax is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

52 HydroMax Air Universal, light, moisture-resistant MDF board for industrial processing and interior applications in damp environments HydroMax Air is a high-quality, low-density MDF board. The surface of these boards is particularly well-sealed and has a high sanding capacity. HydroMax Air can be used in service class 2 (damp environments) and biological hazard classes 1 and 2 of EN Standard The boards, which are dyed green, have high resistance to damp and fluctuations in humidity. - Interior Characteristics L L-MDF.H Moisture resistant Lightweight

53 HydroMax Air Both for standard carpentry and in spaces with a higher atmospheric humidity level, such as bathrooms and kitchens, the HydroMax Air board is a versatile choice. You can finish the MDF board easily with a layer of melamine, veneer, lacquer, paint, HPL or CPL. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² Bending stiffness EN 310 N/mm² Internal bond EN 319 N/mm² 0,45 0,45 0,45 0,45 Swelling/24h EN 317 % Internal bond after cyclic test EN N/mm² 0,25 0,20 0,20 0,15 Swelling/24h after cyclic test EN % HydroMax Air meets the general requirements and comes under formaldehyde emission class E1 as described in Table 1 of EN Standard Available dimensions and thicknesses HydroMax Air is available from stock in various thicknesses and sizes. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. HydroMax Air is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

54 INTERIOR READY TO PAINT

55 FibroPaint Ready-to-paint MDF with a paint grade film FibroPaint is MDF with an excellent millable core. The board has highquality paint grade film on both sides, so that you can paint, spray or lacquer it without pre-treatment using solvent or water-based paint. These boards can be used in service class 1 (dry environments) and can only be used in biological hazard class 1 of Standard EN Ready to paint Characteristics MDF Melamine

56 FibroPaint Thanks to their strong technical characteristics and ease of use, the versatile FibroPaint boards are suitable for many applications in the furniture industry, shop interiors and interior design. These boards have an easy-finish surface for kitchens, walk-in wardrobes and bathrooms as well as sliding doors and partition walls. This board is also often used in shop and office furnishings. FibroPaint is a board that can be finished in a final colour of your choice without pre-treatment. Furthermore, FibroPaint ensures excellent adhesion, fewer layers of paint for a perfect result and uniform paint absorption. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm mm 19 Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm 2 20 Internal bond EN 310 N/mm Bending stiffness EN 319 N/mm 2 0,55 Swelling/24h EN 317 % 12 Available dimensions and thicknesses FibroPaint is available from stock. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. FibroPaint is available on demand with PEFC and FSC labelling. FibroPaint conforms to European standard EN UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

57 FibroPaint Air Lightweight, ready-to-paint MDF with a paint grade film FibroPaint Air is lightweight MDF with an excellent millable core. The board has high-quality paint grade film on both sides, so that you can paint, spray or lacquer it without pre-treatment using solvent or water-based paint. These boards can be used in service class 1 (dry environments) and can only be used in biological hazard class 1 of Standard EN Ready to paint Characteristics L L-MDF Melamine

58 FibroPaint Air Thanks to their strong technical characteristics and ease of use, the versatile FibroPaint Air boards are suitable for many applications in the furniture industry, shop interiors and interior design. These boards have an easy-finish surface for kitchens, walk-in wardrobes and bathrooms as well as sliding doors and partition walls. This board is also often used in shop and office furnishings. FibroPaint Air is a board that can be finished in a final colour of your choice without pre-treatment. Furthermore, FibroPaint Air ensures excellent adhesion, fewer layers of paint for a perfect result and uniform paint absorption. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm mm Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm ² Bending stiffness EN 310 N/mm ² Internal bond EN 319 N/mm ² 0,45 0,45 0,45 0,45 Swelling/24h EN 317 % FibroPaint Air comes under formaldehyde emission class E1 and meets the general requirements as described in Table 1 of EN Standard Available dimensions and thicknesses FibroPaint Air is available from stock in various dimensions and thcknesses. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN, division panels is actively committed to sustainable forest management. FibroPaint Air is available on demand with PEFC and FSC labelling. FibroPaint Air conforms to European standard EN UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

59 HydroPaint Ready-to-paint, moisture-resistant MDF with a paint grade film HydroPaint is a moisture resistant MDF board with an excellent millable core. The board has high-quality paint grade film on both sides, so that you can paint, spray or lacquer it without pre-treatment using solvent or water-based paint. These boards are dyed green throughout and can be used in service class 2 (damp environments) and biological hazard classes 1 and 2 of Standard EN Ready to paint Characteristics MDF.H Moisture resistant Melamine

60 HydroPaint Thanks to their strong technical characteristics and ease of use, the versatile HydroPaint boards are suitable for many applications in the furniture industry, shop interiors and interior design. This board demonstrates minimal expansion and swelling under the influence of high atmospheric humidity, which makes it suitable for general, non-load bearing use in damp spaces such as kitchens and/or bathrooms. HydroPaint is also a board that can be finished in a final colour of your choice without pre-treatment. Furthermore, HydroPaint ensures excellent adhesion, fewer layers of paint for a perfect result and uniform paint absorption. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm 18 Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm ² 24 Bending stiffness EN 310 N/mm ² 2400 Internal bond EN 319 N/mm ² 0,75 Swelling/24h EN 317 % 8 Internal bond after cyclic test EN 321 option 1 N/mm ² 0,20 Swelling/24h after cyclic test EN 321 option 1 % 15 HydroPaint meets the general requirements and comes under formaldehyde emission class E1 as described in Table 1 of EN Standard Available dimensions and thicknesses HydroPaint is available from stock. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates HydroPaint is available from stock. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

61 HydroPaint Air Ready-to-paint, moisture-resistant and lightweight MDF with a paint grade film HydroPaint Air is a lightweight, moisture resistant MDF board with an excellent millable core. The board has high-quality paint grade film on both sides, so that you can paint, spray or lacquer it without pre-treatment using solvent or water-based paint. These boards are dyed green throughout and can be used in service class 2 (damp environments) and biological hazard classes 1 and 2 of Standard EN Ready to paint Characteristics L-MDF.H Moisture resistant Melamine

62 HydroPaint Air Thanks to their strong technical characteristics and ease of use, the versatile HydroPaint Air boards are suitable for many applications in the furniture industry and interior design. This board demonstrates minimal expansion and swelling under the influence of high atmospheric humidity, which makes it suitable for general, non-load bearing use in damp spaces such as kitchens and/or bathrooms. HydroPaint Air is a board that can be finished in a final colour of your choice without pre-treatment. Furthermore, HydroPaint Air ensures excellent adhesion, fewer layers of paint for a perfect result and uniform paint absorption. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm mm 18 Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm ² 18 Bending stiffness EN 310 N/mm ² 1600 Internal bond EN 319 N/mm ² 0,45 Swelling/24h EN 317 % 13 Internal bond after cyclic test EN 321 option 1 N/mm ² 0,2 Swelling/24h after cyclic test EN 321 option 1 % 15 HydroPaint Air meets the general requirements and comes under formaldehyde emission class E1 as described in Table 1 of EN Standard Available dimensions and thicknesses HydroPaint Air is available on request and can be made to order. For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN, division panels is actively committed to sustainable forest management. HydroPaint Air is available on demand with PEFC and FSC labelling. HydroPaint Air conforms to European standard EN UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

63 FibroPrime Air Ready-to-paint, lightweight MDF with a lacquer primer FibroPrime Air is an MDF board with a well-sealed surface and an even white primer coating on both sides. This environmentally friendly primer coating has high dry matter content and is applied with rollers. Ultraviolet light is used to help harden it, which results in a high-quality primer surface. These boards can be used in service class 1 (dry environments) and can only be used in the biological hazard class 1 of Standard EN Ready to paint Characteristics L L-MDF Lacquered

64 FibroPrime Air The versatile FibroPrime Air board is perfectly suited to interior finishes, furniture, stand-building and shop furnishings, but can also be used as a non-load bearing wall or ceiling. What is more, FibroPrime Air is the ideal solution for every DIY enthusiast who wants to get professional results quickly and easily. The industrially lacquered FibroPrime Air surface can be painted or lacquered in a final colour of your choice without pre-treatment. Furthermore, FibroPrime Air guarantees excellent adhesion and a great finish with no wasted paint or swollen MDF fibres. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² Bending stiffness EN 310 N/mm² Internal bond EN 319 N/mm² 0,45 0,45 0,45 0,45 Swelling/24hEN 317 % FibroPrime Air comes under formaldehyde emission class E1 and meets the general requirements as described in Table 1 of EN Standard Available dimensions and thicknesses FibroPrime Air is available from stock in various thicknesses and sizes. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. FibroPrime Air is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

65 HydroPrime Air Ready-to-paint, moisture-resistant lightweight MDF with a lacquer primer HydroPrime Air is a moisture-resistant MDF board with a wellsealed surface and an even white primer coating on both sides. This environmentally friendly primer coating has high dry matter content and is applied with rollers. Ultraviolet light is used to help harden it, which results in a high-quality primer surface. Further coats of paint can be applied to these boards in the final colour of your choice. The boards are dyed green throughout and can be used in service class 2 (damp environments) and biological hazard classes 1 and 2 of Standard EN Ready to paint Characteristics L L-MDF.H Moisture resistant Lacquered

66 HydroPrime Air Versatile HydroPrime boards are perfect for carpentry, especially in spaces with higher atmospheric humidity such as kitchens and bathrooms. HydroPrime can also be used as a non-load bearing wall or ceiling and it is a great choice as well for every DIY enthusiast who wants to get professional results quickly and easily. The industrially lacquered HydroPrime surface can be painted or lacquered in a final colour of your choice without pre-treatment. Furthermore, HydroPrime guarantees excellent adhesion and a great finish with no wasted paint or swollen MDF fibres. Technical specifications General characteristics + Standard Unit Average values Thickness EN mm 18 Technical characteristics + Standard 5/95 percentile values Bending strength EN 310 N/mm² 18 Bending stiffness EN 310 N/mm² 1600 Internal bond EN 319 N/mm² 0,45 Swelling/24h EN 317 % 13 Internal bond after cyclic test EN 321 option 1 N/mm² 0,20 Swelling/24h after cyclic test EN 321 option 1 % 15 HydroPrime Air comes under formaldehyde emission class E1 and meets the general requirements as described in Table 1 of EN Standard Available dimensions and thicknesses HydroPrime Air is available from stock. Consult the complete UNILIN Panels stock range at For our technical capabilities on custom thicknesses and dimensions, as well as minimum order requirements, please contact our sales team or info.panels@unilin.com. Certificates UNILIN Division Panels is actively committed to sustainable forest management. HydroPrime Air is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg B-8780 Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

67 INTERIOR SHELVES

68 UniShelf Melamine faced chipboard with edge bands The UniShelf boards have a good quality surface with a decorative layer of melamine. Edging strips on two or four sides ensure a perfect finish. A wide choice of designs, surface textures, edge finishes and dimensions offers something for everyone. - Decorative panels Characteristics Melamine layer

69 UniShelf Because UniShelf is easy to use, its possible applications are almost endless. The board is extremely well suited to furniture production and interior applications. For example, UniShelf is popular with DIY users, in kitchens, walk-in wardrobes or as board material for standalone shelves. Finish For the edging strips you can choose from a finish with melamine or impact resistant ABS in various thicknesses. Both types of edging strip are available with a straight taped profile. Laminated edging strips are also available with an E or X profile. Various edging strips can be combined with a choice of profiles: ABS: straight Melamine: straight, E-profile and X-profile Combinations: X-profile Available dimensions and thicknesses You will find a complete list of our furniture panels with matching edging strips in the UniShelf stock brochure. Thanks to its consistent vertical integration, UNILIN, division panels can also supply other dimensions and finishes from the standard dimensions listed below (in consultation and with a minimum order amount). White furniture panels WHITE 2 long sides in melamine 020 TST TST Width mm Length 2500 mm Quantity per pallet WHITE 2 long sides in melamine 020 TST Width mm Length 3050 mm Quantity per pallet WHITE 2 long sides in ABS 1 mm 025 TST Width mm Length 2500 mm Quantity per pallet Decorative furniture panels DESIGN 2 long sides in melamine Breadth mm Length 2500 mm Quantity per pallet Certificates European standard EN UNILIN, division panels is actively committed to sustainable forest management. UniShelf is available on demand with PEFC and FSC labelling. UNILIN, division panels Ingelmunstersteenweg Oostrozebeke - Belgium info.panels@unilin.com / 13/01/2016

70 INTERIOR CLICBOX

71 UP TO 5X FASTER INSTALLATION ClicBox Kitchen cabinets with a click system that make you the winner. PATENTED TECHNOLOGY

72 UNICLIC system white finish (Also available in lissa oak and ivory) chipboard STANDARD FEATURES No tools necessary Faster assembly Flexible drilling template Thanks to the UNICLIC technology it is possible to click the panels easily into each other without using any tools, adhesive or fittings. With the UNICLIC technology the panels can be assembled faster than in the case of a traditional kitchen cabinet. UNICLIC system white finish Chipboard The panels already feature a drilling template that matches the fittings of major suppliers: This drilling template offers you many options for the layout of your kitchen. Find our dealer list on Watch our movie online, scan the QR-code! ClicBox is a quality product by Unilin bvba, division panels Ingelmunstersteenweg Oostrozebeke - Belgium T F info.panels@unilin.com with UNICLIC-technology PATENTED TECHNOLOGY

73 The UNICLIC technology The UNICLIC technology is a tongue and groove solution which enables a click connection at an angle of 90. This revolutionary technology makes it possible to assemble flat packed kitchen cabinets by simply clicking the components together, without requiring any tools, fittings or adhesive! The UNICLIC for furniture technology has won the Interzum Award 2011 Intelligent Material & Design Best of Best. Fast & easy assembly Stronger connection No visible fittings The panels of the kitchen cabinet only need to be clicked together. It is as easy as 1,2,3! The click connection is stronger than a traditional assembly system as the joints interlock along the entire assembly lenght instead of only on 2 fixing points. As there are no fittings required with UNICLIC, the technology is completely invisible PATENTED TECHNOLOGY ClicBox

74 A fast & simple experience for every professional Very easy & highly intuitive assembly A game changer for your productivity rate; up to 5 times faster! No tools, no glue, no fittings Easy to transport & convenient to handle Less components A 100% cost & time efficient solution Assembled in 30 seconds! 0:00 0:06 0:15 0:24 0:30

75 Product features that make the difference 18 mm 8 mm 18 mm thick MFC panels, 1 mm ABS on leading edges 18 mm thick MFC panels, 1 mm ABS on leading edges No fittings because of UNICLIC technology Solid top and bottom are interchangeable 18 mm adjustable shelves; 3 possible heights Adjustable tool-less legs Tool-less solid centerpost with a unique Turnfastener technology Tool-less and adjustable hanging bracket system Flexible drilling template means more options and greater efficiency. ClicBox is FSC certified ClicBox

76 A flexible drilling pattern The drilling patterns of the cabinets are adapted to accommodate most major fitting suppliers: The smart drilling pattern offers a lot of possibilities: Doors + fridge Doors + drawers + fridge Drilling pattern base units Doors + oven Türen + Schubladen + Backofen Larders with doors & drawers

77 ClicBox offers a complete range The complete range contains 42 skus in 3 different colours: white, ivory & lissa oak white ivory lissa oak BASE CABINETS WALL CABINETS LARDER CABINETS DOOR/ DRAWER LINE FULL DRAWER CORNER UNDER OVEN WALL CORNER ANGLED BRIDGE TALL SHELVING PACKS* Side L=R L=R L=R L=R L=R L=R L=R L=R L=R / Height / Depth Width 150 Width 300 Width 350 Width 400 Width 450 Width 500 Width Width 700 Width 800 Width 900 Width *includes 2 fixed and 2 adjustable shelves. ClicBox

78 with UNICLIC-technology PATENTED TECHNOLOGY ClicBox clicks together,...without tools Ready in Unilin ClicBox is an entirely new range of kitchen cabinets with a patented and revolutionary UNICLIC for furniture technology which enables you to just click the different components together. Ingelmunstersteenweg Oostrozebeke - Belgium T F info.panels@unilin.com /2014