an extensive line of science-based solutions residential. united states

Transcription

1 an extensive line of science-based solutions residential. united states

2 For more than 60 years, The Dow Chemical Company has been a recognized leader in extruded polystyrene foam insulation. Since developing STYROFOAM Brand Extruded Polystyrene Foam Insulation, Dow has continued to build on its foam expertise and technical strength to provide its customers with the right thermal envelope product for just about any application. Today, the extensive line of science-based solutions from Dow Building Solutions includes: STYROFOAM Brand Extruded Polystyrene Foam Insulation Dow Polyisocyanurate Insulation STYROFOAM Brand Spray Polyurethane Foam (SPF) Insulation WEATHERMATE Housewraps WEATHERMATE Construction Tape WEATHERMATE Straight and Flexible Flashings WEATHERMATE Sill Pan FROTH-PAK Foam Insulation and FROTH-PAK Foam Sealant kits GREAT STUFF PRO Gaps & Cracks Insulating Foam Sealant GREAT STUFF PRO Window & Door Insulating Foam Sealant GREAT STUFF PRO Wall & Floor Adhesive TILE BOND Roof Tile Adhesive Rigid Foam Insulation Dow s portfolio of rigid foam insulation products includes STYROFOAM Brand Extruded Polystyrene foam and Dow polyisocyanurate insulation. Proprietary manufacturing processes produce boards with uniform, closed-cell structures and high, stable R-values. STYROFOAM Brand Insulation products offer the highest moisture resistance of any foam plastic insulation available in the industry today. The reusable boards feature high compressive strength but are also lightweight and easy to cut to size. Dow polyisocyanurate insulation products feature insulation cores of thermoset foam plastic laminated to a variety of facers that enhance strength, moisture resistance and rigidity. Spray Polyurethane Foam Insulation, Sealant and Adhesive Products Dow polyurethane products offer dependable service in a wide variety of applications. The one- and two-component systems are specially formulated for each application. And they are compatible with most construction materials. Weather Barrier Solutions Make sure your homes are covered against air and moisture that can contribute to energy loss, compromise comfort and cause damage with WEATHERMATE Weather Barrier Solutions. STYROFOAM Brand Extruded Polystyrene Foam Insulation, polyisocyanurate insulations, WEATHERMATE housewraps, flashings, sill pan and tape from Dow work together to create a complete exterior water management solution for comprehensive protection from the elements. Spray Polyurethane Foam STYROFOAM Brand Spray Polyurethane Foam (SPF) is a two-component, spray-applied insulation that expands during installation to create a seamless, monolithic barrier for protection against water and air. Offered in three formulations for both new and retrofit applications, STYROFOAM Brand SPF Insulation, when properly installed, is both a moisture-resistant air barrier and insulation, and provides structural reinforcement. STYROFOAM Brand SPF Insulation provides structural enhancement only. Use in conjunction with approved structural components and framing members consistent with local building code requirements. Trademark of The Dow Chemical Company ( Dow ) or an affiliated company of Dow 1 the right products. based on building science.

3 Extruded Polystyrene Foam Insulation STYROFOAM Brand DURAMATE Plus An extruded polystyrene foam board with proprietary extra-tough plastic film on both sides. Recommended for wall sheathing in residential applications. Very tough, durable performance reduces damage on the job site. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR UL Classified, see Classification Certificate D369. Calif. Std. Reg. # CA T064. Florida Building Code FL Nominal Board Thickness*, in.5 R-Value AT 75ºF 3.0 Board size, ft 4 x 8, 4 x 9 styrofoam Brand Perimate An extruded polystyrene foam insulation board with dovetail grooves cut into one face of the board and shiplap edges on the long edges. When installed on the exterior of basement walls, it provides insulation, protects the waterproofing membrane and assists water drainage away from the foundation. Complies with ASTM C578 Type IV. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR UL Classified, see Classification Certificate D369. Calif. Std. Reg. # CA T064. Florida Building Code FL Nominal Board Thickness*, in R-Value AT 75ºF Board size, ft 2 x 8 styrofoam Brand Residential Sheathing An extruded polystyrene foam insulation board with plastic film on both sides. Recommended for wall sheathing in residential applications. Plastic film reduces job site damage. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR UL Classified, see Classification Certificate D369. Calif. Std. Reg. # CA T064. Florida Building Code FL Nominal Board Thickness*, in R-Value AT 75ºF Board size, ft 4 x 8, 4 x 9, 4 x 10 styrofoam Brand Scoreboard An extruded polystyrene foam insulation board with square edges on all four sides. Scored longitudinally on 16" and 24" centers, making it easy to snap into convenient widths. Complies with ASTM C578 Type IV. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR UL Classified, see Classification Certificate D369. Calif. Std. Reg. # CA T064. Florida Building Code FL Nominal Board Thickness*, in R-Value AT 75ºF Board size, ft 4 x 8 * Note: Not all products and sizes are available in all parts of the country. Other product sizes are available on a made-to-order basis. Please contact your Dow sales representative with questions. building envelope solutions 2

4 Extruded Polystyrene Foam Insulation STYROFOAM Brand Square Edge An extruded polystyrene foam insulation board with square edges on four sides. Offers exceptional water resistance, long-term thermal performance and high compressive strength. Complies with ASTM C578 Type IV. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR UL Classified, see Classification Certificate D369. Calif. Std. Reg. # CA T064. Florida Building Code FL Nominal Board Thickness*, in R-Value AT 75ºF Board size, ft 2 x 8, 4 x 8 STYROFOAM Brand Tongue & Groove An extruded polystyrene foam insulation board with tongue and groove edges on all four sides of 2' x 8' boards, 1" thick or less and on the long edges on all other boards. Nominal Board Thickness*, in R-Value AT 75ºF Board size, ft 2 x 8, 4 x 8, 4 x 9 Complies with ASTM C578 Type IV. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR UL Classified, see Classification Certificate D369. Calif. Std. Reg. # CA T064. Florida Building Code FL STYROFOAM Brand wallmate An extruded polystyrene foam board with rabbet edges on long edges. Designed as a quick, easy option for insulating and finishing the interior of basement walls. When boards are butted together, the rabbet edges form a slot between boards that accommodates a wood nailing strip. The wood nailing strip attaches the boards to the wall and provides a nail base for drywall. Complies with ASTM C578 Type X. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR UL Classified, see Classification Certificate D369. Calif. Std. Reg. # CA T064. Florida Building Code FL Nominal Board Thickness*, in R-Value AT 75ºF Board size, ft 2 x 8 Polyisocyanurate Insulation Super TUFF-R A high-performance polyisocyanurate foam core with three-ply poly/ aluminum foil facers laminated to the core made via a patented process, resulting in durability. One facer is blue; the other facer is reflective foil. Complies with ASTM C1289 Type I. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR-3089 Calif. Std. Reg. # CA T383. Nominal Board Thickness*, in R-Value AT 75ºF Board size, ft 4 x 8, 4 x 9, 4 x 10 (1) (1) Available in.5" and 1" only. This product is not available in all areas. Please contact Dow for availability in your area. THERMAX Sheathing A glass-fiber-reinforced polyisocyanurate foam core with solid aluminum foil facers on both sides. Can be installed exposed to the interior without a thermal barrier. Complies with ASTM C1289 Type I, Class 2. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR FM 4880 see Factory Mutual Approval Guide. Calif. Std. Reg. # CA T383. Nominal Board Thickness*, in R-Value AT 75ºF Board size, ft 4 x 8, 4 x 9, 4 x 10 * Note: Not all products and sizes are available in all parts of the country. Other product sizes are available on a made-to-order basis. Please contact your Dow sales representative with questions. 3 building envelope solutions

5 Polyisocyanurate Insulation THERMAX White Finish A glass-fiber-reinforced polyisocyanurate foam core faced with nominal 1.25 mil embossed white acrylic-coated aluminum on one side and 0.9 mil smooth aluminum on the other. Can be installed exposed to the interior without a thermal barrier. Complies with ASTM C1289 Type I, Class 2. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR FM 4880 see Factory Mutual Approval Guide. Calif. Std. Reg. # CA T383. Nominal Board Thickness*, in R-Value AT 75ºF Board size, ft 4 x 8, 4 x 10 TUFF-R A high-performance polyisocyanurate foam core with reflective aluminum foil facers on both sides (one side reinforced). Complies with ASTM C1289 Type I. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR-3089 Calif. Std. Reg. # CA T383. Nominal Board Thickness*, in R-Value AT 75ºF Board size, ft 4 x 8, 4 x 9, 4 x 10 This product is not available in all areas. Please contact Dow for availability in your area. Weather Barrier Solutions STYROFOAM Brand Sill Seal Foam Gasket A flexible polyethylene foam gasketing strip used to reduce air infiltration between concrete foundation and sill plate or around windows. Not applicable. sold in rolls* 3 1/2" x 50' 5 1/2" x 50' 7 1/2" x 50' weathermate Housewrap Woven, perforated, polyolefin-based housewrap that is both tough and tear-resistant. Offers an effective option for builders who prefer to use housewrap as a secondary weather-resistive barrier. It is translucent to allow clear view of studs and sheathing surface. Can remain uncovered for up to 60 days. Meets IBC/IRC requirements for a waterresistive barrier. See ICC ESR sold in rolls* 10' x 150' 9' x 100' 9' x 150' 9' x 195' 4'6" x 150' 3' x 100' weathermate Plus Housewrap A non-woven, non-perforated, polyolefin-based housewrap. Offers an effective option for builders who prefer to use housewrap as a secondary weather-resistive barrier. It is translucent to allow clear view of application surface. Exceptional tear resistance and durability compared to other leading non-woven, non-perforated wraps. Can remain uncovered for up to 120 days. Meets IBC/IRC requirements for a secondary water-resistive barrier. See ICC-ES NER-640 and ICBO-ES ER sold in rolls* 10' x 100' 10' x 150' 9' x 100' 9' x 150' 3' x 100' 3' x 165' * Note: Not all products and sizes are available in all parts of the country. Other product sizes are available on a made-to-order basis. Please contact your Dow sales representative with questions. building envelope solutions 4

6 weather barrier solutions weathermate construction tape Strong, pliable, highly adhesive tape seals joints and seams of WEATHERMATE and WEATHERMATE Plus housewraps and STYROFOAM Brand Insulated Sheathings. Oriented polypropylene backing formulated with UV-treated film helps resist degradation from exposure to sunlight. Complies with ASTM D3330 and ASTM D882. sold in rolls* 1 7/8" x 165' 2 7/8" x 165' 3 7/8" x 165' weathermate Straight Flashing A crosslinked polymeric film facer with butyl rubber adhesive creates a water-resistant seal at window and door openings. Compatible with WEATHERMATE Sill Pan. Meets requirements of ASTM E2112, ICBO AC148-01, ICC-ES AC and AAMA sold in rolls* 4" x 100' 6" x 100' 9" x 100' Thickness: 20 mil weathermate Flexible Flashing A crosslinked polymeric film facer with butyl rubber adhesive creates a water-resistant seal around curved windows and doors, and custom shapes. Compatible with WEATHERMATE Sill Pan. Meets requirements of ASTM E2112, ICBO AC148-01, ICC AC and AAMA sold in rolls* 6" x 75' 9" x 75' Thickness: 60 mil weathermate Sill Pan A flexible PVC sill pan manufactured for consistent thickness. Integrated corners offer excellent protection against water seepage. Compatible with WEATHERMATE Flexible Flashing and WEATHERMATE Straight Flashing. Meets requirements of ASTM E2112. Dimensions: 5" h x 3 3/4" d x 32" w (each piece) Sold as two-piece assembly Polyurethane Foam Insulation, Sealant and Adhesive Products FROTH-PAK Foam Insulation and FROTH-PAK Foam Sealant Kits Two-component, quick-cure spray polyurethane foams that fill studs, sill plates and large cavities for insulation and air sealing. The foam sealant kit is available in a selection of densities, properties and performance ranges to meet different application requirements. The full coverage spray foam insulation is available as a medium density foam. FROTH-PAK Foam Sealant kit is UL classified as a sealant R FROTH-PAK Foam Insulation tested to ASTM E84 at 2" thick, meets building code Class A requirements. cure time (1) Products FROTH-PAK Foam Sealant kits Tack-free <1 min.; trim in <5 mins. FROTH-PAK Foam insulation kits Density, lb/ft 3 R-Value, Product Theoretical Yield, bd ft (2) aged (initial) (3) FROTH-PAK (6.3) FROTH-PAK (6.0) Density, lb/ft 3 R-Value, aged Product Theoretical Yield, bd ft (2) (initial) (4) FROTH-PAK (6.6) FROTH-PAK (6.6) FROTH-PAK (6.0) FROTH-PAK (6.0) (1) Actual cure time will depend on temperature, foam thickness, specific nozzle used, etc. (2) The theoretical yield has become an industry standard for identifying certain sizes of two-component kits. Theoretical yield calculations are performed in perfect laboratory conditions, without taking into account the loss of blowing agent or the variations in application methods and types. A board foot equals 1 ft 2 based on 1" thick. (3) Ft 2 h F/Btu; aged LTTR measured at 2" thick (4) R-value per inch; ft 2 h F/Btu; aged 90 days at 140 F FROTH-PAK spray polyurethane foam contains isocyanate, hydrofluorocarbon blowing agent and polyol. Read the instructions and Material Safety Data Sheets carefully before use. Wear protective clothing (including long sleeves), gloves, goggles or safety glasses, and proper respiratory protection. Supplied air or an approved air-purifying respirator equipped with an organic vapor sorbent and a P100 particulate filter may be required to maintain exposure levels below ACGIH, OSHA, WEEL or other applicable limits. Provide adequate ventilation. Contents under pressure. * Note: Not all products and sizes are available in all parts of the country. Please contact your Dow sales representative with questions. 5 add thermal protection building envelope solutions

7 Polyurethane Foam Insulation, Sealant and Adhesive Products Great stuff pro Gaps & Cracks A one-component, minimal-expanding, insulating, fire-blocking penetration polyurethane foam sealant ideal for smaller gaps and penetrations less than 3". Identifiable orange color. ICC-ES ESR UL Classified as a sealant R cure time (1) Tack-free 5-10 mins.; trim in 30 mins.; full cure 1 hour size* 24 oz can, available in both gun and straw foam (1) Actual cure time will depend on temperature, relative humidity and size of foam bead. Size Yield, linear ft (1) Density, lb/ft 3 24 oz can oz can (1) Yield at 3/8" diameter bead tested to ASTM C1536. GREAT STUFF PRO Gaps & Cracks Insulating Foam Sealant contains isocyanate and a flammable blowing agent. Read the label and Material Safety Data Sheet carefully before use. Eliminate all sources of ignition before use. Wear long sleeves, gloves, and safety glasses or goggles. Provide adequate ventilation or wear proper respiratory protection. Contents under pressure. Great stuff pro window & Door A one-component, minimal-expanding, low pressure-build formulation, polyurethane foam sealant that won t bow window and door frames when applied properly. Identifiable yellow color. ICC-ES ESR Tested to AAMA psi, air leakage per ASTM E283, ASTM E331, ASTM E547, ASTM C1620. UL Classified as a sealant R cure time (1) Tack-free 5-10 mins.; trim in 1 hour; full cure 12 hours size* 20 oz can, available in both gun and straw foam (1) Actual cure time will depend on temperature, relative humidity and size of foam bead. GREAT STUFF PRO Window & Door Insulating Foam Sealant contains isocyanate and a flammable blowing agent. Read the label and Material Safety Data Sheet carefully before use. Eliminate all sources of ignition before use. Wear long sleeves, gloves, and safety glasses or goggles. Provide adequate ventilation or wear proper respiratory protection. Contents under pressure. Great stuff pro wall & floor Adhesive An all-weather polyurethane adhesive used for bonding subfloors, drywall, paneling, foam panels and most construction materials. Listed with PFS Corporation for adhesive methods ASTM D6464 and ASTM D3498. cure time (1) Holding power in 2 hours and full bond in 7 days size* 26.5 oz can, gun applied only (1) Actual cure time will depend on temperature, relative humidity and size of foam bead. GREAT STUFF PRO Wall & Floor Adhesive contains isocyanate and a flammable blowing agent. Read the label and Material Safety Data Sheet carefully before use. Eliminate all sources of ignition before use. Wear long sleeves, gloves, and safety glasses or goggles. Provide adequate ventilation or wear proper respiratory protection. Contents under pressure. Great stuff pro gun cleaner An innovative solution simplifies uncured foam cleanup. Attach foam dispensing gun for cleaning or use red spray nozzle. Not applicable. size* 12 oz can GREAT STUFF PRO Gun Cleaner is flammable and contains acetone and propane. Read the label and Material Safety Data Sheet carefully before use. Eliminate all sources of ignition before use. Wear gloves, and goggles or safety glasses. Provide adequate ventilation or wear proper respiratory protection. Contents under pressure. styrofoam Brand Spray Polyurethane Foam insulation A two-component, 2 pcf density spray polyurethane foam system. Designed for fast, effective insulating air sealing for energy and moisture management around the building envelope. Three formulas for wide processing latitude. Meets IBC/IRC requirements for foam plastic insulation. ASTM E84 Class A at 4 inches. See ICC ESR AGED r-value (1) - RS at 1"; 25 at 4" AGED r-value (1) - RS at 1"; 24 at 4" AGED R-VALUE (1) - RS at 1"; 24 at 4" SIZE - RS2030/RS2045/RS gal drum sets, A component (isocyanate) B component (polyol blend), Total weight 990 lbs (1) Aged ºF, 50% R.H. per FTC requirements STYROFOAM Brand Spray Polyurethane Foam contains isocyanate, hydrofluorocarbon blowing agent and polyol. Read the instructions and Material Safety Data Sheets carefully before use. Wear protective clothing (including long sleeves), gloves, goggles and proper respiratory protection. Supplied air or an approved air-purifying respirator equipped with an organic vapor sorbent and a P100 particulate filter is required to maintain exposure levels below ACGIH, OSHA, WEEL or other applicable limits. Provide adequate ventilation. Contents under pressure. STYROFOAM Brand SPF should be installed by a trained SPF applicator. * Note: Not all products and sizes are available in all parts of the country. Please contact your Dow sales representative with questions. building envelope solutions 6

8 Polyurethane Foam Insulation, Sealant and Adhesive Products PRO Foam Dispensing guns Foam dispensing guns for GREAT STUFF PRO products. Creates airtight seal between gun and can, allowing reuse of can for up to 30 days. Adjustable, pinpoint control and no post-dispensing foam drip for less foam waste. Not applicable. Pro 13 Products PRO 13 Gun Lightweight, durable plastic handle and body with metal trigger. Includes two 8" plastic extension straws and two 2" cone-shaped tips. Pro 14 Pro 15 PRO 14 Gun Durable, lightweight aluminum body, and large flow control knob with secured back-screw system. Nonstick can adapter and needle, and replaceable smooth dispensing nozzle. PRO 14 XL version available with one-piece extended barrel: 40" long. PRO 15 Gun Premium model features a nonstick can adapter, needle and check valve, and a stainless steel barrel for longer life. Smooth dispensing nozzle. Pro 14XL guide tip PRO 14XL Gun Contractors and builders can now enjoy a longer, more comfortable reach while applying GREAT STUFF PRO Wall & Floor Adhesive. The new longer barrel of the PRO 14XL dispensing gun reaches an impressive 40" (102 cm) replacing the previous 26.5" (67 cm) length. PRO 14XL Dispensing Gun Guide Tip A new guide tip specially designed for the PRO 14XL is now available! The new guide tip helps align the gun over framing lumber to control the position of the bead for faster, more accurate dispensing. The new guide tips will be included in each Pro 14 XL gun box along with updated installation instructions. Additional XL gun guide tips can be ordered. Tile bond A portable, one-component, minimal-expanding roof tile adhesive for attaching concrete and clay roof tiles in new and reroof applications. application temperature 60 F - 90 F Size* 28 oz can, 23 lb canister * Note: Not all products and sizes are available in all parts of the country. Please contact your Dow sales representative with questions. UL Classified as an adhesive. Miami-Dade NOA , Expiration Date 8/23/11. Florida Building Code FL 717-R2. TILE BOND Roof Tile Adhesive contains isocyanate and a hydrofluorocarbon blowing agent. Read the label and Material Safety Data Sheet carefully before use. Wear long sleeves, gloves, and goggles or safety glasses. Provide adequate ventilation or wear proper respiratory protection. Contents under pressure. NOTICE: No freedom from any patent owned by Dow or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining whether products and the information in this document are appropriate for Customer s use and for ensuring that Customer s workplace and disposal practices are in compliance with applicable laws and other government enactments. The product shown in this literature may not be available for sale and/or available in all geographies where Dow is represented. The claims made may not have been approved for use in all countries or regions. Dow assumes no obligation or liability for the information in this document. References to "Dow" or the "Company" mean the Dow legal entity selling the products to Customer unless otherwise expressly noted. NO EXPRESS WARRANTIES ARE GIVEN EXCEPT FOR ANY APPLICABLE WRITTEN WARRANTIES SPECIFICALLY PROVIDED BY DOW. ALL IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED. NOTICE: Changes to the International Residential Code require the installation of a water-resistive barrier (WRB) within most exterior wall assemblies in residential construction. The following Dow insulated sheathing products qualify as a WRB when installed according to the installation instructions developed for "installation of foam sheathing as a weather-resistive barrier": STYROFOAM DURAMATE Plus, STYROFOAM Residential Sheathing, STYROFOAM Tongue and Groove, STYROFOAM Square Edge, STYROFOAM Residing Board, THERMAX Sheathing, TUFF-R and Super TUFF-R and therefore do not require the use of a building paper or a housewrap as a WRB. When a WRB is not needed, these Dow foam sheathings may be installed according to standard installation instructions for foam sheathing from Dow. Be sure products and installation instructions meet code requirements for your particular location. Note: WEATHERMATE and WEATHERMATE Plus Housewraps have already qualified as water-resistive alternatives to the prescribed felt (see Evaluation Reports NER-593 and NER-640 for approved alternative). STYROFOAM Brand Extruded Polystyrene Foam Insulation CAUTION: This product is combustible. Protect from high heat sources. A protective barrier or thermal barrier may be required as specified in the appropriate building code. For more information, consult MSDS, call Dow at BLUE (2583) or contact your local building inspector. In an emergency, call Dow Polyisocyanurate Insulation CAUTION: This product is combustible and shall only be used as specified by the local building code with respect to flame spread classification and to the use of a suitable thermal barrier. For more information, consult MSDS, call Dow at BLUE (2583) or contact your local building inspector. In an emergency, call WARNING: Rigid foam insulation does not constitute a working walkable surface or qualify as a fall protection product. Dow Polyurethane Foam Insulation and Sealants CAUTION: When cured, these products are combustible and will burn if exposed to open flame or sparks from high-energy sources. Do not expose to temperatures above 240ºF. For more information, consult MSDS, call Dow at BLUE (2583) or contact your local building inspector. In an emergency, call GREAT STUFF PRO Insulating Foam Sealants contain isocyanate and a flammable blowing agent. Read the labels and Material Safety Data Sheets carefully before use. Eliminate all sources of ignition before use. Wear long sleeves, gloves, and goggles or safety glasses. Provide adequate ventilation or wear proper respiratory protection. Contents under pressure. FROTH-PAK Spray Polyurethane Foam contains isocyanate, hydrofluorocarbon blowing agent and polyol. Read the instructions and Material Safety Data Sheets carefully before use. Wear protective clothing (including long sleeves), gloves, goggles or safety glasses, and proper respiratory protection. Do not breathe vapor or mist. Use only with adequate ventilation. It is recommended that applicators and those working in the spray area wear respiratory protection. Increased ventilation significantly reduces the potential for isocyanate exposure, however, supplied air or an approved air-purifying respirator equipped with an organic vapor sorbent and a particulate filter may still be required to maintain exposure levels below ACGIH, OSHA, WEEL or other applicable limits. For situations where the atmospheric levels may exceed the level for which an air-purifying respirator is effective, use a positive-pressure, air-supplying respirator (air line or self-contained breathing apparatus). Spraying large amounts of foam indoors may require the use of a positive pressure, air-supplying respirator. Contents under pressure. STYROFOAM Brand Spray Polyurethane Foam contains isocyanate, hydrofluorocarbon blowing agent and polyol. Read the instructions and Material Safety Data Sheets carefully before use. Wear protective clothing (including long sleeves), gloves, goggles and proper respiratory protection. Supplied air or an approved air-purifying respirator equipped with an organic vapor sorbent and a P100 particulate filter is required to maintain exposure levels below ACGIH, OSHA, WEEL or other applicable limits. Provide adequate ventilation. Contents under pressure. STYROFOAM Brand SPF should be installed by a trained SPF applicator. TILE BOND Roof Tile Adhesive contains isocyanate and a hydrofluorocarbon blowing agent. Read the label and Material Safety Data Sheet carefully before use. Wear long sleeves, gloves, and goggles or safety glasses. Provide adequate ventilation or wear proper respiratory protection. Contents under pressure. GREAT STUFF PRO Gun Cleaner is flammable and contains acetone and propane. Read the label and Material Safety Data Sheet carefully before use. Eliminate all sources of ignition before use. Wear gloves, and goggles or safety glasses. Provide adequate ventilation or wear proper respiratory protection. Contents under pressure. Building and/or construction practices unrelated to building materials could greatly affect moisture and the potential for mold formation. No material supplier including Dow can give assurance that mold will not develop in any specific system. THE DOW CHEMICAL COMPANY. Dow Building Solutions. 200 Larkin. Midland, MI For Technical Information: BLUE (2583) For Sales Information: Printed in U.S.A. Form No X-1112MCK McKAY Trademark of The Dow Chemical Company ( Dow ) or an affiliated company of Dow Habitat for Humanity is a registered service mark owned by Habitat for Humanity International