Renault Store - Technical specifications. Initiale Paris area. Renault Brand Stores - July 2015

Transcription

1 Renault Store - Technical specifications Initiale Paris area

2 Renault Store / Technical specifications for Initiale Paris zone / Contents 2 General Introduction 4 Colours & materials 5 Layout principles 6 Modularity of zone 7 Technical principles Floor markings 9 Display wall 10 2 x 2 m visuals display panel 15 Technical specifications 17

3 General

4 Renault Store / Technical specifications for Initiale Paris zone / General 4 Introduction In order to show off the range in the showrooms, a system of thematic zones has been developed. These thematic zones aim to structure the vehicle displays and improve product readability as well as the commercial effectiveness of the dealerships. The Initiale Paris zone Emblematic of the essence of the Brand, Initiale Paris-badged vehicles represent the top of range of each model in the line-up. A graphic display wall attracts the customer and showcases the vehicles presented in this specific space. The zone features a visuals display panel. The 2 x 2 m visuals are provided by the country Marketing Department. 2 1 The Initiale Paris zone consists of: 1 A graphic display wall 2 A visuals display panel in 2 x 2 m format 3 White floor markings 4 One, two or three vehicles 5 A price display module 6 Specific lighting (see lighting technical specifications) 4 5 3

5 Renault Store / Technical specifications for Initiale Paris zone / General 5 Colours & materials Visuel 2 x 2 Support magnétique sur tôle Dibond ou toile tendue imprimée en finition mate RAL 9003 satin white Floor markings in solid-coloured extruded PVC or lacquered aluminium sheet Dark grey equivalent to RAL 7024 Lacquered or powder-coated steel for attachment plates Anodised or RAL 9007 grey aluminium Finish for 2 x 2 frame profiles: 15 μ natural anodised finish or RAL 9007 Typeface Renault Life Visual for Display wall Support in printed stretched fabric with matt finish. Branding and texts Refer to the «Showroom communications» specifications NOTE: maximum 40% gloss for all satin finishes.

6 6 Renault Store / Technical specifications for Initiale Paris zone / General Layout principles The Initiale Paris zone must be installed: - near the facade and/or the Renault Road, - away from the Dacia showroom and used vehicles showroom - separated from other thematic zones by at least one vehicle, sales desk or Renault Store unit. The Initiale Paris zone is exclusively devoted to Initiale Paris vehicles. Ensure that the Initiale Paris zone is near power sockets so that the vehicles can be connected to approved battery chargers. Actu Actu

7 Renault Store / Technical specifications for Initiale Paris zone / General 7 Modularity of zone Principle 1 The display wall is always placed at the back of the zone, behind the vehicle(s). 2 The visuals display panel is installed on one of the edges, parallel to the vehicle. It is centred relative to the overall zone and positioned in line with the markings carreaux tiles carreaux tiles 1 Carreaux 600 x 600 mm carreaux tiles carreaux tiles 7 carreaux 7 tiles carreaux tiles 3 The vehicle(s) is (are) arranged perpendicular to the display wall and aligned so as to be equidistant from the wall. It must be possible to open the doors whilst leaving a passage between vehicles and with respect to the visuals display panel. Renault Store / Pôles et zones thématiques / Initiale Paris Carreaux 450 x 450 mm 600 x 600 mm tiles Floor markings carreaux tiles carreaux tiles 9 carreaux 9 tiles The floor markings are always aligned with the joints between the tiling of the display area as follows: For 3 vehicles: - 60 x 60 cm tiling: 18 x 10 tiles - 45 x 45 cm tiling: 24 x 13 tiles For 2 vehicles: - 60 x 60 cm tiling: 12 x 10 tiles - 45 x 45 cm tiling: 16 x 13 tiles For 1 vehicle: - 60 x 60 cm tiling: 7 x 10 tiles - 45 x 45 cm tiling: 9 x 13 tiles 450 x 450 mm tiles carreaux tiles 13 tiles 13 carreaux carreaux tiles

8 Technical principles

9 Renault Store / Technical specifications for Initiale Paris zone / Technical principles 9 Floor markings Description These components are adapted to the theme of the zone and made of an opaque solid-coloured material, such as extruded PVC nitrile, 2 mm thick, white RAL The finish is a 40% gloss satin finish. The finish is comprised of a mitre cut or rightangle cut in strips with the installation of a strip of double-sided foam adhesive (w. 70 x thk. 5.5 mm) Key 1 Mitre cut (45 ) 2 Right-angle cut

10 Renault Store / Technical specifications for Initiale Paris zone / Technical principles 10 Display wall 4000 Description The visual consists of: - a detail of the IP concept car - the Initiale Paris signature

11 204 Renault Store / Technical specifications for Initiale Paris zone / Technical principles 11 Display wall Base module The display walls are put together based on a module of l mm x h mm. This component is made using an outer aluminium profile, which forms a frame to which stretched fabric is fastened at the front and back. The fabric is fixed in place using a strip that clips into the grooves of the aluminium profile. The assembly is fastened to the floor with steel plates that serve as ballast. These plates are clad with sheet steel with an RAL 7024 grey lacquer finish (in one or two sections) Key 1 Front surface of digitally printed stretched fabric 2 Internal bracing structure 3 Mounting bracket 4 Steel ballast (min. 20 mm thick) 5 Plate cladding RAL 7024 grey lacquered steel sheet, 5 mm thick 6 Outer aluminium profile comprising attachment grooves in RAL 9007 grey lacquer r.5 mm

12 Renault Store / Technical specifications for Initiale Paris zone / Technical principles 12 Display wall 4000 Assembly principle The base modules with dimensions l mm x h mm can be assembled to offer a larger surface area of visuals. In this scenario, the vertical intermediary joints must be discreet, meaning that the modules have to be well aligned with each other. The reverse of the display wall may be fitted with one of the following two options: - printed fabric as for the front side, - neutral fabric in medium grey colour similar to the colour of the aluminium frame Key 1 Fastening between modules (details to be specified by the supplier) 2 Stretched fabric, l mm x h mm 2 2

13 Renault Store / Technical specifications for Initiale Paris zone / Technical principles 13 Display wall Schematic exploded view 1 Outer aluminium profile comprising attachment grooves in RAL 9007 grey lacquer 2 Connecting angle bracket for outer profiles 3 Internal bracing structure 4 Front surface of digitally printed or neutral stretched fabric 5 Steel angle bracket for attachment of the frame onto the plates 6 Attachment plate in 1 or 2 sections. Steel sheet, 5 mm thick, in RAL 7024 grey epoxy paint 7 Pads to protect tiling and for shimming of plates 8 Back surface of digitally printed or neutral stretched fabric

14 Renault Store / Technical specifications for Initiale Paris zone / Technical principles 14 Display wall Fabric mounting The drawing opposite illustrates the recommended method for holding the fabric surfaces in place. The design of the profile may be adapted, but the following conditions must be complied with: - the beading strip must be installed from the front with very low visibility of the profile on the front (without a crossmember overlap), - the visible surface of the side profile should be smooth (no visible grooves). de 85 à 160 mm 85 to 160 mm Key 1 Fabric surface 2 Silicone strip sewn into the fabric 3 Pointed angle bracket retaining screw 4 Angle reinforcements for fastening the profiles to the plates 5 Profile joining brackets fitted into the grooves

15 Renault Store / Technical specifications for Initiale Paris zone / Technical principles 15 2 x 2 m visuals display panel Description The display is made of two half-frames, l x h x thk. 50 mm The frame is made from an outer aluminium profile to which Dibond panels are affixed at the front and rear. 1 From the front, only a thickness of approx. 1 to 2 mm of the profile is visible around the image. 2 Variant 1 The Dibond panels are affixed with a metal adhesive enabling the decorations to be affixed to magnetic paper Variant 2 The stretched fabric sheets are attached by a silicone strip which slots into grooves in the outer profile set out for this purpose. Key 1 Printed front panels 2 RAL 9007 grey lacquered outer aluminium profile 3 RAL 7024 grey lacquered steel sheet 5 mm thick Protective pads to be installed

16 Renault Store / Technical specifications for Initiale Paris zone / Technical principles 16 2 x 2 m visuals display panel Schematic exploded view 1 Reverse side - Variant 1. Dibond panels in 2 parts - Variant 2. Stretched fabric, 1 piece 2 Outer aluminium profile comprising attachment grooves and ridges for the panels in RAL 9007 grey lacquered Dibond 3 Steel joint bar to align the two half-panels fitted into the grooves of the profile 4 Front side - Variant 1. Dibond panels in 2 parts Metal adhesive, digital printing on 500-micron magnetic paper - Variant 2. Stretched fabric, 1 piece Silicone strip for fastening 5 Internal stiffener for stretched fabric 6 Connecting angle bracket for outer profiles 7 Plate in two parts RAL 7024 grey lacquered steel sheet 5 mm thick 8 Tiling protection pads

17 Renault Store / Technical specifications for Initiale Paris zone / Technical principles 17 Technical specifications Impression des visuels A number of 2.1 m wide M1 category printing substrates are available and enable printing on a range of high-quality printing machines while keeping material loss to a minimum. For an optimum lifespan the colours in the visuals require good resistance to UV light. By way of example, the most satisfactory results were obtained with the following machine characteristics: Eight-colour printing at 720 dpi on mixed cloth (70% cotton and 30% polyester) of 210 g/m2 (opaque fabric). The content of the visuals will be made available as a template. Depending on the technical choices and to ensure the perfect assembly of the display walls, adaptations may be necessary (management of overlap and full bleed). Visual compliance of colours All shades have a satin finish with 40% gloss. Particular attention should be paid to complying with the colour code. Colour and material samples shall be provided for approval before production launch. The rendering of each of the shades in day and night-time conditions shall be assessed, in particular when used on two different materials. Floor markings General description The contours of the range display areas will be marked out on the ground. These markings are 180 mm wide, either in straight lines or at an angle. They are stuck to the ground with double-side adhesive covering the boundaries of each component. Manufacturing These components are cut out in thermoplastic sheet material, such as extruded PVC, ABS, polycarbonate, etc. They offer good resistance to abrasion and impacts, and are solid-coloured in white. Any other materials, including adhesives and honeycomb PVC (e.g. Forex), are prohibited, since they do not offer the resistance required for these conditions. Production principle Visuals must comply with the official images of these technical requirement specifications (CCTP). The supplier must submit production drawings for approval, accompanied by all descriptions of sub-assemblies integrated into the components. Based on the main principles defined in these specifications, the supplier is expected to provide recommendations regarding the choice of materials and the means implemented to comply with the dimensions and aesthetic aspects defined in this document. Variants The supplier is required to provide a definition of components as described in the drawings document. Nevertheless, the submission of low-cost variants is desired and expected. When the supplier deems it necessary they may submit variants to RENAULT to the procedures or methods described in the definition document, as long as these variants correspond to the aesthetic requirements set out and can be used homogeneously on various families of components to ensure in particular a comparable ageing of colours, along with the expected guarantees. By way of example, any reshaping of component surfaces, different ways of connecting the sub-assemblies, or changes in materials, decoration or painting procedures, must be reported.

18 Renault Store / Technical specifications for Initiale Paris zone / Technical principles 18 Technical specifications Design principles Graphic display wall Outer surfaces are made of fabric (2 parts of 2000 x 3000 mm placed next to each other and fixed together), with a silicone strip around the edges which fits into the grooves on the profile. If necessary, reinforcements are laid out on the structure to brace it and prevent any deformation due to the tension in the fabric. Obligation du fournisseur Suppliers shall ensure the stability of the structure through the supply of dynamic and static design calculation notes certified by an approved inspection office (ERPE regulations to be observed). They shall provide the dealership with an assembly and use note defining the stability conditions of these display walls (air movement, horizontal position of attachment plates, vertical position of structures, etc.) and the ways to change visuals. Protection of goods and persons In particular, the supplier is responsible for the calculation, sizing and operational implementation of structural components, such that they offer good resistance over time, and that the safety of the public who come into direct contact with these components is not placed at risk (in particular for free-standing components). Technical study The supplier shall analyze this definition file, draft a technical summary and produce a folder of production drawings to submit to RENAULT for approval. The samples of materials and colours shall be attached to this folder. A specific schedule for the project shall be established, identifying the passage and validation points expected by Renault. First batch production Following validation of the production folder, the supplier shall proceed with industrial launch, in particular for tools used for implementation. The first batch for each component shall be assembled by the supplier for presentation to Renault and validation where appropriate. Mass production Following first-batch validation and the potential communication of desired changes, the supplier will receive approval for the launch of mass production of the components. The supplier shall then produce the components in full compliance with the production folder submitted and the pre-production components accepted. Warranty A one-year warranty against any production and installation defects is requested.