Quick Reference Guide

Transcription

1 PART NO. Quick Reference Guide DESCRIPTION CLEANERS / DEGREASERS PART NO. DESCRIPTION LUBRITS / MAINTENANCE MS20/20 Glass Cleaner MS100 6% Silicone Lubricant And Release Agent MS22/80 Citrus Cleaner MS160 Coverall Tan Blockout Enamel MS22/90 Heavy Duty Degreaser MS410 Food Processors Silicone Spray Lubricant MS480 Screen Opener MS666 Food Processors Silicone Grease Lubricant ADHESIVES MS710 Economy Food Processors Silicone MS300 General Purpose Spray Adhesive MS888 Silicone Release Agent & Lubricant MS303 Foam & Fabric Spray Adhesive MS999 Dry Silicone MS313 Fast Tack Upholstery Adhesive MSA1000 Dry Lubricant Release Agent MS343 Construction Adhesive RELEASE AGENTS MS363 High Strength Fast Tack Spray Adhesive MS100 6% Silicone Lubricant And Release Agent MS365 Hi-Bond High Strength Spray Adhesive MS610 Silicone Release Spray MS373 High Performance Adhesive MS888 Silicone Release Agent & Lubricant MS375 Screen Printers' Flash Cure Adhesive MS980 Urethane Release Agent MS380 Screen Printers' Adhesive MSA1000 Dry Lubricant Release Agent MS385 Webbing Screen Printers' Adhesive MS1080 Paintable Mold Release MS393 Headliner, Trim & Laminating Adhesive MS1680 Economy Silicone Mold Release Agent ALWAYS PRE-TEST Always pre-test for compatibility with resins and post decorating processes. MS MS OTHER SPRAYS Par-NC (Concentrated SiliconeRelease Agent) Iron Clad (Metal Protective Agent) SHIPPING NOTE: All Camie orders will be shipped via ground service or freight. We cannot ship Camie Mold Sprays via UPS Next Day Air or 2nd Day Air due to regulations regarding aerosol spray cans. Toll Free Phone: Fax: Local Phone: Fax:

2 Cleaners / Degreasers MS20/20 Glass Cleaner Fast foaming action formula that dries quickly without streaking or hazing. Highly concentrated for all light duty cleaning applications on surfaces not affected by water, including glass, metal, plastic and paint. Contains ammonia. MS20/20 (19.5 oz. net weight) cans per case. MS22/80 Natural Citrus Cleaner Created out of concern for the environment, MS22/80 is a natural citrus cleaner unusually effective as a mold cleaner as well as for removal of adhesives, grease, oil stains, road tar, rubber marks, residue from decals, heel marks, graffiti, lipstick, release agents, and even soap film. Use where chlorinated solvents are not recommended. Can be used safely on most substrates, including painted surfaces, glass, porcelain, concrete, and is compatible with some plastics. LEAVES NO RESIDUE OR FILM! (15 oz. net weight) cans per case. MS22/80 MS22/80B-5 5 gal. Pail Call for MS22/80B-55 MS22/90 Heavy Duty Cleaner/Degreaser MS22/90 does not contain any chlorinated solvents. It is recommended for heavy duty cleaning and degreasing jobs when effectiveness and strong action are needed to accomplish the task. This product is useful on machinery, floors, work areas, and for degreasing metal parts. It is not recommended for use on electrical components or contacts, nor is it recommended for use on a running motor. VOC Compliant, OTC Compliant MS22/90 (15 oz. net weight) cans per case. MS480 Screen Opener Camie 480 Screen Opener works to unclog screens and loosen plastisol inks on screens. It works fast to reduce down-time on screen printing projects. (15 oz. net weight) cans per case. MS480 Toll Free Phone: Fax: Local Phone: Fax:

3 Adhesives MS300 General Purpose Spray Adhesive MS300 offers quick adhesion to metal, plastic, wood, paper, cardboard, fabric, leather, etc. Produces instant tack with high strength to form a temporary or permanent bond, which ever is desired. Used extensively in the garment, furniture and upholstery industries, as well as shipping room applications, such as sealing and pelletizing of bags. (14 oz. net weight) cans per case. MS300 MS300B-5 MS300B-55 MS303 Foam & Fabric Spray Adhesive MS303 is designed to work well on urethane foam, fabric, metal, supported vinyls, wood, paper and leather. It is orange in color and offers a unique lace spray pattern for low soak-in on polyurethane foam. It offers a soft pliable bond and a better build of glue at the bond line. It is extremely economical compared to other brands. MS303 MS313 Fast Tack Upholstery Adhesive MS313 is formulated without 1,1,1 trichloroethane and offers a faster "set time". It has a soft bond. Primarily used in the upholstery industry, MS313 is available in either a natural or red tint. It does not contain any chlorofluorocarbons or ozone depleting chemicals. (12 oz. net weight) cans per case. MS313 MS313B-4 1 Case* Call for MS313B-5 5 gal. Pail Pricing MS313B gal. Drum *(4) 1 Gallon Pails per Case MS343 Construction Adhesive Camie 343 Construction Adhesive is a fast tack, fast grab, low soak-in adhesive. It was especially formulated to bond polyethylene to itself, concrete block, wood, and many other hard-to-bond surfaces. It may also be used to bond paper, cardboard, fabric, urethane foam, foil, metal, wood, and most plastics to themselves and a variety of other substrates. Camie 343 may be used either for a permanent or temporary bond. (14 oz. net weight) cans per case. MS343 MS343B-5 5 gal. Pail Call for MS343B-55 Toll Free Phone: Fax: Local Phone: Fax:

4 Adhesives MS363 High Strength Fast Tack Adhesive Spray MS363 was developed specifically to offer a fast tacking, high strength adhesive for a wide variety of applications. Especially suitable for bonding polyethylene film, wood, foam, fabric, and paper. Pressure-sensative to allow repositioning, MS363 has a lace spray pattern, is transparent, and will not degrade polystyrene. (14 oz. net weight) cans per case. MS363 MS363B-5 5 gal. Pail Call for MS363B-55 MS365 Hi-Bond High Strength Spray Adhesive MS365 is a high-temperature, high-strength, contact adhesive. White in color, it has a lace spray pattern for low soak-in to allow more adhesive to remain on the surface where needed. Works well for decorative plastic laminant work, metal, wood, particle board and some plastics such as polypropylene and polyethylene film. Meets MMM- 130A edge lift requirements for plastic laminant work. MS365 (12 oz. net weight) cans per case. MS373 High Performance Adhesive Spray MS373 is a highly effective, all-purpose, pressure-sensative spray that was developed for a wide variety of applications and can be used in nearly any application desired. Its mist-like spray is colorless and MS373 is particularly recommended for labeling, palletizing, screen printing, and many other general purpose applications. MS373 MS373B-5 5 gal. Pail Call for MS373B-55 MS375 Screen Printers Flash Cure Adhesive MS375 was designed primarily for the screen printers industry, but also provides a quick adhesion for metal, wood, paper, cork, fabrics and leather. This clear, mist type spray is particularly suited for the rapid heat cycles encountered in the flash cure process. (14 oz. net weight) cans per case. MS375 MS375B-5 5 gal. Pail Call for MS375B-55 Toll Free Phone: Fax: Local Phone: Fax:

5 Adhesives MS380 Screen Printers Adhesive Spray MS380 was specifically designed to offer true pressuresensative adhesion that will not stain, yet offers a quick tack and low soak-in. Will not wrinkle fine materials and can be used where ever transfer of adhesive is a problem. (14 oz. net weight) cans per case. MS380 MS380B-5 5 gal. Pail Call for MS380B-55 MS385 Webbing Screen Printers Spray Adhesive A clear, pressure-sensative adhesive that does not stain and offers the user quick tack. Low soak-in and will not wrinkle material while in use. Specifically designed for fleece and other high-density garments. (12 oz. net weight) cans per case. MS385 MS393 Headliner, Trim, & Laminating Adhesive MS393 headliner, trim, and laminating adhesive is formulated to bond substrates that require either high bond strength and/or need elevated temperature resistance. MS393 also exhibits excellent green strength and water resistance. MS393 (12.5 oz. net weight) cans per case. Lubricants / Maintenance MS100 Heavy Duty Silicone Lubricant MS100 is a multipurpose, 6% high viscosity silicone spray for general maintenance applications that can smooth the flow of production by reducing friction and binding. It can be used in molding, cutting, sawing, and slicing operations where friction or sticking decreases output. An excellent product to prevent the formation of rust, static electricity, or the buildup of inks and adhesives. It is odorless and stainless in most applications. MS Cases ( Cans) Toll Free Phone: Fax: Local Phone: Fax:

6 Lubricants / Maintenance MS160 Coverall Tan Blockout Enamel Excellent box cover-up that is fast drying, waterproof, and will not rub off when dry. Prevents bleed through of old labels and stenciling. Can be used on cardboard, wood, paper, metal, and matches most corrugated containers. Packaged twelve 16 fluid ounce (12 oz. net weight) cans per case. MS160 MS410 Food Processors Silicone A dry-type spray lubricant that contains 5% silicone. Excellent for keeping surfaces slick and stick-free. Odorless and tasteless, heat stable, MS410 is recommended for all sorts of food processors including; dairies, bottlers, bakers, candy and sugar manufacturers and others. Can be used on heat sealers, kettles, trays, cutters, saws, mixers, blenders, and all stainless steel equipment. Active ingredients comply with FDA regulations. MS410 MS610 Economy Silicone Lubricant Reduces friction and prolongs the life of cutting blades, heat sealing equipment, rollers, conveyors, and chutes. Highly recommended for use with chrome, steel, brass, stainless steel, aluminum, glass, rubber, fabric and most plastics. Provides release and prevents sticking in gluing, sealing and molding operations. (11 oz. net weight) cans per case. MS610 MS50B-5 5 gal. Pail Call for MS50B-55 MS666 Heavy Duty Silicone Lubricant & Release Agent A 6% silicone that produces a heavy, grease-like coating that clings to surfaces, reduces friction and prevents sticking. MS666 repels water and is also unaffected by temperatures from -400 F to +500 F. Provides a long-lasting lubrication and prevents corrosion. Excellent for use in cold and frozen storage areas. Active ingredients comply with FDA and USDA regulations when used in a food processing area. MS666 (13 oz. net weight) cans per case. Toll Free Phone: Fax: Local Phone: Fax:

7 Lubricants / Maintenance MS710 Economy Food Processors Silicone Lubricant MS710 economy food processors silicone lubricant is heat stable and can be used for all food processors and on all packaging equipment to prevent sticking and reduce friction. Packaged twelve 16 fluid ounce (9 oz. net weight) cans per case. MS710 MS888 Silicone Mold Release MS888 is our most popular silicone release agent, with a 3% silicone content and a dry type spray pattern that is useful on most plastic resins including acrylics, cellulose, ABS, polystyrenes, polyesters and rubber. Odorless and nonstaining. The active ingredient complies with FDA regulations. MS888 (13.5 oz. net weight) cans per case. MS999 Dry Silicone Lubricant MS999 is a 4% dry, all-purpose lubricant that can be used to eliminate squeaking and stop sticking in almost any application. It is especially recommended for plastic and painted surfaces. It is economical to use and has active ingredients that comply with FDA regulations. (13 oz. net weight) cans per case. MS999 MS999B-5 5 gal. Pail Call for MS999B-55 MSA1000 Dry Paintable Release USING ZINC STEARATE? TRY MSA1000! A PTFE dispersion of a white, waxy, low molecular weight polymer. Useful for high temperature compression molding. Works well on epoxies, nylons, polyurethanes, polystyrenes, acrylics, polypropylenes, phenolics and TPR. Parts may be post-finished, as MSA1000 does not transfer to the part. MSA1000 MSA1000B-5 5 gal. Pail Call for MSA1000B-55 Toll Free Phone: Fax: Local Phone: Fax:

8 Release Agents MS100 Heavy Duty Silicone Lubricant MS100 is a multipurpose, 6% high viscosity silicone spray for general maintenance applications that can smooth the flow of production by reducing friction and binding. It can be used in molding, cutting, sawing, and slicing operations where friction or sticking decreases output. An excellent product to prevent the formation of rust, static electricity, or the buildup of inks and adhesives. It is odorless and stainless in most applications. MS Cases ( Cans) MS610 Economy Silicone Lubricant Reduces friction and prolongs the life of cutting blades, heat sealing equipment, rollers, conveyors, and chutes. Highly recommended for use with chrome, steel, brass, stainless steel, aluminum, glass, rubber, fabric and most plastics. Provides release and prevents sticking in gluing, sealing and molding operations. (11 oz. net weight) cans per case. MS610 MS50B-5 5 gal. Pail Call for MS50B-55 MS888 Silicone Mold Release MS888 is our most popular silicone release agent, with a 3% silicone content and a dry type spray pattern that is useful on most plastic resins including acrylics, cellulose, ABS, polystyrenes, polyesters and rubber. Odorless and nonstaining. The active ingredient complies with FDA regulations. MS888 (13.5 oz. net weight) cans per case. MS980 Urethane Release Agent MS980 is a silicone release agent that is useful for rigid polyurethanes, epoxies, polyesters, TPR and thermoset resins. (12.7 oz. net weight) cans per case. MS980 Toll Free Phone: Fax: Local Phone: Fax:

9 Release Agents MSA1000 Dry Paintable Release USING ZINC STEARATE? TRY MSA1000! A PTFE dispersion of a white, waxy, low molecular weight polymer. Useful for high temperature compression molding. Works well on epoxies, nylons, polyurethanes, polystyrenes, acrylics, polypropylenes, phenolics and TPR. Parts may be post-finished, as MSA1000 does not transfer to the part. MSA1000 MSA1000B-5 5 gal. Pail Call for MSA1000B-55 MS1080 Paintable Mold Release MS1080 is our most popular all purpose paintable release agent. It's economical to use, eliminates costly cleanups, and is universally accepted by injection, extrusion and compression molders, permitting high speed production. Does not build up and does not interfere with painting, hot stamping, vacuum metalizing or gluing. It can be used on most substrates including rubber, acrylics, polyesters, polystyrenes, and cellulose. MS1080 (11 oz. net weight) cans per case. MS1680 Economy 3% Silicone Release Agent MS1680 is a universal silicone type release agent recommended for injection, RIM, rotational molders, extruders and vacuum formers. This product can be used with all common resins. This silicone and all others may interfere with a post decorating step. Care should be taken when needing to paint, hot stamp, vacuum metalize or glue (testing should be performed). Silicone release agents generally are recognized as effective for releasing hard to work resins. In addition to being a release agent, silicones are excellent general purpose lubricants for a variety of industrial applications. MS Cases (1-119 Cans) Packaged twelve 16 fluid ounce (9 oz. net weight) cans per case. Toll Free Phone: Fax: Local Phone: Fax:

10 Other Sprays MS Concentrated Silicone Release Agent A highly concentrated silicone release agent for use when sticking is a problem. Odorless, colorless, heat stable and non-staining. ParNC will not interfere with painting, metalizing, or other binding processes. Works as an excellent release agent for plastic, rubber, ceramic, and glass parts. MS Cases (1-119 Cans) 10+ Cases (120+ Cans) (15 oz. net weight) cans per case. MS Iron Clad Metal Protective Agent Iron Clad Metal Protective Agent dries to a thin, MS Cases (1-119 Cans) 10+ Cases (120+ Cans) barrier against heat, snow, rain, salt water and other industrial corrosive elements. Transparent formula allows colors and markings to remain visible on protected metal. (1 lb. 1 oz. net weight) cans per case. Toll Free Phone: Fax: Local Phone: Fax: