Wedge Anchor B Steel, zinc plated

Transcription

1 Wedge Anchor for noncracked concrete Wedge Anchor Steel, zinc plated Range of loading: kn 3,2 kn Range of concrete quality: C/25 C/0 Approvals and Certificates Description The tried and tested wedge anchor with European technical approval, Option, is ideal for timesaving through fastenings in noncracked concrete. approved M M 1 Its two effective anchorage depths make it very flexible, reducing contacts with reinforcements when holes are drilled. The long thread also makes standoff fastenings possible. The hot dip galvanised version is also included in the approval, like the U version with the extra large washer for timber structures. FF0 MKT Software 3. MKT MetallKunststoffTechnik GmbH & Co. KG Auf dem Iel 2 D5 Weilerbach Advantages Approved for use in noncracked concrete Very high load limits and small spacings and edge distances Two effective anchorage depths for greater flexibility The smaller effective anchorage depth helps to reduce drilling and installation time The standard effective anchorage depth is suitable for fastenings under the highest load limits and small spacings and edge distances Particularly cost effective: shorter lengths with only one (smaller) anchorage depth Suitable for surface, through and standoff fastenings All sizes covered by the approval are assembled with a stainless steel expansion clip Fire tested in compliance with DIN 4. Fire resistance ratings F F0 US approval (FM) for the installation of sprinkler systems (M to M1) An impact head protects the thread from damage when it is driven into the drilled hole Applications Metal constructions, channels, brackets, supports, hand rails, cable trays, ducts, shelf bases. 2

2 Mechanical Heavy Duty Anchors Wedge Anchor Steel zinc plated Approved for noncracked concrete Standard Anchorage Depth Reduced Anchorage Depth Description Ref. No. Fixturethickness Drill Hole Ø Setting Anchorage Fixture Drill Hol Ø Setting Anchorage Anchor Thread Pkg. Weight per x Depth Depth Depth thickness x Depth Depth Depth length content pkg. hnom,red hnom,red,red l pcs. kg / x Mx1 1,05 / x 3 52 Mx 1,2 / 01 x 4 x 3 Mx 1, 25/2 01 x 4 25 x 3 2 Mx35 1,3 2535/ x 4 35 x 3 2 Mx35 1,1 / 01 x 4 x 3 Mx35 1,1 / 0251 x 4 x 3 Mx35 2,0 5/ 01 5 x 35 Mx 2,32 4/ x Mx25 2,2 1/ 0111 x 5 1 x 4 35 Mx 3, / 01 x 5 x 4 35 Mx 3,2 2/5 01 x 5 2 x Mx 3, 2534/ x 5 34 x 4 35 Mx 3,5 3/5 01 x 5 3 x Mx0 3,2 35/ x 5 x 4 35 Mx 3, / x 5 54 x Mx 4, 4/ x 5 4 x Mx5 4,54 /1 011 x 5 x Mx5 / x 25 0 Mx25 2,2 1/5 01 x x 5 5 Mx 2,3 21/ 01 x x 5 Mx 4 2/5 01 x x 5 5 Mx 3,0 3/ x x 5 5 Mx0 3,32 41/0 01 x x 5 0 Mx 3,2 5/ x x 5 5 Mx 3,5 0/ x0 2 4 x 5 1 Mx 4,35 /1 01 x0 2 4 x 5 1 Mx 5, 1/ x0 2 4 x 5 2 Mx 25 3,0 5/ 01 5 x 3 Mx 25 1, /5 01 x 5 Mx 25 2,33 25/5 01 x 2 25 x 5 Mx0 25 2, /1 01 x 2 x 1 Mx 25 2,0 35/1 01 x 2 35 x 1 Mx0 25 2,0 / x 2 x 5 Mx 25 2, /1 01 x 2 x 1 Mx 25 3,2 / 0351 x 2 x Mx 25 3,4 5/ x 2 x 1 Mx 25 3, 50/ 01 5 x 2 0 x Mx 25 4, 51/ x 2 1 x 0 Mx 25 5,04 1/ x 2 x 2 Mx 4,3 1/2 01 x 2 1 x 2 Mx 4, / x 2 5 x 25 Mx 5,21 / x 2 2 x 325 Mx 5, 2/3 01 x 2 2 x 3 Mx,53 1/ x 52 M1x35 3,32 1/1 01 1x M1x0 3, 12/1 01 1x x M1x0 4, /1 01 1x x M1x 4, 10/ x x M1x1 5, 1/ x x5 4 4 M1x1 3, 111/0 01 1x x M1x 3,4 11/ x x M1x 4, 11/ x x M1x 4, 121/3 01 1x x M1x 5,23 /0 041 x 0 Mx 3,1 52/ x1 1 2 x1 1 Mx0 3, /1 01 x1 1 x1 1 Mx0 4, 3/ x1 1 5 x1 1 Mx0 4, 02/ x1 1 2 x1 5 Mx0 4,4 511/ x x1 2 Mx0, 1/ x1 1 1 x1 2 Mx0, Not part of approval, expansion clip steel, zinc plated. Mechanical Mechanische Heavy Schwerlastdübel Duty Anchors 2

3 Mechanical Heavy Duty Anchors Extract from Permissible Service Condition of ETA01/00. Loads and performance data Wedge Anchor Standard anchorage depth Reduced anchorage depth, red M M M M M 1 M noncracked concrete Mean ultimate loads, tension C25/ Num, 1,,3 1,2 34,5 2,1 51,4 43, 0,0 53, Mean ultimate loads, shear C25/ Vum 1 1 2,1 2,1 41,3 41,3 3,0 3,0 3, 3, Approved loads, tension C/25 appr. N 5,0,,5,,5 1,,3 2 1,5 C25/ appr. N 3,1 5,5,4,2, 1,,5 2,4 1,2 C/3 appr. N 3,5,0,1,0,3,4 21,,0 2,2 C/ appr. N,0,,2 1,,0 25,1 1 33, 23,3 C/0 appr. N 11,,1 1,,2 2, 1,0 3,2 25, C/25 appr. V 5,0,0,5,3,5 3,1 33,1 > C25/ appr. V 5,5,,2,3 3,1 3,4 5,1 5,1,1,1 2 2,,,,,0,0 noncracked concrete Approved loads, shear Approved bending moments appr. M Spacing and edge distance Effective anchorage depth Characteristic spacing scr, N Characteristic edge distance ccr, N 0 52,5 2 3, noncracked concrete Minimum spacing smin Minimum edge distance cmin Minimum thickness of concrete slab Drill hole diameter do 1 1 Diameter of clearance hole in the fixture df 1 1 Depth of drill hole Installation torque Width across nut SW Installation parameters Application limited to statically indeterminated systems. For anchor designing, an easy to operate CDROM is available on request or can be downloaded at hnom,red hnom,red,red M2 M2 Nm Installation 2 Mechanical Heavy Duty Anchors Approved loads for single anchor without influence of spacing and edge distance. Total safety factor as per ETAG 001 included (γm and γf). Load capacities under fire exposure see page.

4 Wedge Anchor for noncracked concrete Wedge Anchor A4 / HCR Stainless steel A4/31 and Stainless steel 1.2 Range of loading: kn 43, kn Range of concrete quality: C/25 C/0 Description The tried and tested wedge anchor with European technical approval, Option, is ideal for timesaving through fastenings in noncracked concrete. Its two effective anchorage depths make it very flexible, reducing contacts with reinforcements when holes are drilled. The long thread also makes standoff fastenings possible. Approvals and Certificates M approved M M 1 FF0 MKT Software 3. MKT MetallKunststoffTechnik GmbH & Co. KG Auf dem Iel 2 D5 Weilerbach The wedge anchor M and HCR is also approved for multiple use for nonstructural applications and similar fixtures in cracked and noncracked concrete. Applications Medium to heavy duty indoor and outdoor use, metal structures, brackets, machines. Advantages Approved for use in noncracked concrete Very high load limits and small spacings and edge distances Two effective anchorage depths for greater flexibility The smaller effective anchorage depth helps to reduce drilling and installation time The standard effective anchorage depth is suitable for fastenings under the highest load limits and small spacings and edge distances Particularly cost effective: shorter lengths with only one (smaller) anchorage depth Suitable for surface, through, and standoff fastenings Fire tested in compliance with DIN 4. Fire resistance ratings F F0 US approval (FM) for the installation of sprinkler systems (M to M1) An impact head protects the thread from damage when it is driven into the drilled hole Wedge Anchor M A4 and HCR: Multiple use for nonstructural applications and similar fixtures in tunnels and or external atmospheric exposures.

5 Mechanical Heavy Duty Anchors Wedge Anchor A4 Stainless steel A4/31 ETA approval for cracked and noncracked concrete Description Ref. No. Fixturethicknes Not part of approval. HCR on demand. Standard Anchorage Depth Drill Hole Ø x Dept Setting Dept hnom Anchorage ddepth Fixturethicknes,red Reduced Anchorage Depth Drill Hole Ø x dept Setting Dept hnom,red Anchorage Depth,red Anchorlength pcs. kg / A x Mx1 1,0 /52 A x 3 52 Mx 1,2 / A4 01 x 4 x 3 Mx 1,5 2535/2 A x 4 35 x 3 2 Mx35 1, / A x 4 x 3 Mx35 2,0 5/ A x 35 Mx 2,34 4/0 A x Mx25 2,4 1/ A x 5 1 x 4 35 Mx 3, / A4 01 x 5 x 4 35 Mx 3,2 2/5 A4 01 x 5 2 x Mx 3, 3/5 A4 01 x 5 3 x Mx0 3,3 /1 A x 5 54 x Mx 4, 4/0 A x 5 4 x Mx5 4,5 /0 A x 25 0 Mx25 2, 1/5 A4 01 x x 5 5 Mx 2,5 21/ A4 01 x x 5 Mx 2/5 A4 01 x x 5 5 Mx 3, 3/5 A x x 5 5 Mx0 3,33 41/0 A4 01 x x 5 0 Mx 3, 5/5 A x x 5 5 Mx 3, 0/1 A x0 2 4 x 5 1 Mx 4,3 /1 A4 01 x0 2 4 x 5 1 Mx 5, 1/2 A x0 2 4 x 5 2 Mx 25 3, 5/ A x 3 Mx 25 1, /5 A4 01 x 5 Mx 25 2,33 25/5 A4 01 x 1 25 x 5 Mx0 25 2,53 /1 A4 01 x 1 x 1 Mx 25 2,2 35/1 A4 01 x 1 35 x 1 Mx0 25 2,0 /5 A x 1 x 5 Mx 25 2, /1 A4 01 x 1 x 1 Mx 25 3,2 / A x 1 x Mx 25 3, 5/1 A x 1 x 1 Mx 25 3, 50/ A x 1 0 x Mx 25 4,2 1/2 A x 1 x 2 Mx 4,3 1/ A x 52 M1x35 3,3 1/1 A4 01 1x M1x0 3, 12/1 A4 01 1x x M1x0 4,34 /1 A4 01 1x x M1x 4, 10/1 A x1 2 1x M1x1 5, 1/ A x1 2 1x5 3 4 M1x1 3,2 111/0 A4 01 1x x M1x 3,5 11/2 A x1 2 1x M1x 3, 121/3 A4 01 1x x M1x 5,1 52/1 A x1 1 2 x1 1 Mx0 3, 3/1 A x1 1 5 x1 1 Mx0 4,4 02/5 A x1 1 2 x1 5 Mx0 5,03 511/2 A x x1 2 Mx0,2 Thread Pkg. content Weight per pkg. Mechanical Mechanische Heavy Schwerlastdübel Duty Anchors Wedge Anchor HCR High corrosion resistant steel 1.2 (HCR) Approved for multiple use for nonstructural applications Standard Anchorage Depth Reduced Anchorage Depth Description Ref. No. Fixturethicknes Drill Hole Ø Setting Anchorage Fixture Drill Hole Ø Setting Anchorage Anchor Thread Pkg. Weight per x Dept Dept Depth thicknes x Dept Dept Depth length content pkg. hnom,red hnom,red,red pcs. kg 0/5 HCR 01 0 x 4 x 3 5 Mx 1,5 / HCR 01 x 4 x 3 Mx 1, 2535/2 HCR x 4 35 x 3 2 Mx 2, / HCR 0251 x 4 x 3 Mx 2,35 Other length on demand. 31

6 Wedge Anchor for noncracked concrete Extract from Permissible Service Conditions of ETA01/00 and ETA0/01. Approved loads for single anchor without influence of spacing and edge distance. Total safety factor as per ETAG 001 included (γm and γf). Load capacities under fire exposure see page. Loads and performance data Wedge Anchor A4 / HCR M M M M M 1 M Standard anchorage depth, 4 Reduced anchorage depth, red 4 53,1 noncracked concrete Mean ultimate loads, tension C25/ Num 11,0,2 1,,4 23,1 1,5 3,4, 53,5 3, 3,0 Mean ultimate loads, shear C25/ Vum,, 1,5 1,5 31, 31,,,,, 1,4 1,4 2,4 1, cracked concrete (multiple use only) Approved loads 3) (any direction) C/25 to C/0 appr. F noncracked concrete Approved loads, tension Approved loads, shear C/25 appr. N 3, 4,3, 11,,5 1,2,3 2 1,5 C25/ appr. N 3, 3,1 4,,4,1 1,,5 2,4 1,2 C/3 appr. N 4,4 3,5,0 5,2,0,5,4 21,0,0 2,2 C/ appr. N 4,,1,0,,1 1,,0,2 1 33, 23,3 C/0 appr. N 4, 4,4,, 11,, 1,5,2 2, 1,0 3,2 25, C/25 appr. V 3,, 5,0,0,5,4,5 2,, 43, 33,1 > C25/ appr. V, 5,5,,2,4 2, 2,0 43, 3,4 appr. M,, 2,0 2,0 4, 4, Approved bending moments 1, 1, 231, 231, Spacing and edge distance Effective anchorage depth 4 4 Characteristic spacing scr, N 0/302) /2) Characteristic edge distance ccr, N 0/2) /12) 52,5 2 3, cracked concrete (multiple use only) Minimum spacing smin Minimum edge distance cmin Minimum thickness of concrete slab noncracked concrete Minimum spacing smin / c 35/ 35/ 35/ 0/0 /0 Minimum edge distance cmin / s 35/0 /35 /1 0/0 / Minimum thickness of concrete slab 1 1 Drill hole diameter do 1 1 Diameter of clearance hole in the fixture df 1 1 Depth of drill hole / 0/ / /0 1/1 /1 1/1 / 0/ / /1 1/1 /1 1/1 Installation parameters Installation torque /2) /2) Width across nut SW Application limited to statically indeterminated systems. 2) For applications according to ETA01/00. / For applications according to ETA0/01. For anchor designing, an easy to operate CDROM is available on request or can be downloaded at 3) The maximum load per fixing point for multiple use for nonstructural applications may, depending on national regulations, are below the approved load of the anchor. The approved loads per fixing point are regulated for their respective countries in the ETAG 001, Part. hnom,red hnom,red,red M2 M2 Nm Installation 32