Welcome to the Red Head Product & Resource Book

Transcription

1

2 Welcome to the Red Head Product & Resource Book Our Product and Resource Book is not just a catalog of the quality Red Head Anchoring Systems so many of you have come to rely on, but a resource guide to give you the information you need to help you work better, faster and easier. New this year is an expanded and highly detailed Application Section. This new section allows you to look up your trade or specialty, view a variety of practical applications and receive detailed product recommendations. Along with the product recommendations you ll notice page numbers for easy reference to the product selection and specifications pages. Another new item this year is the consolidation of our Adhesive Anchoring System under the Red Head brand name. The old Epcon name may be gone, but the versatile adhesive anchoring products and formulas remain. As always this Product and Resource Book continues to provide a wealth of valuable information including: product approvals/listings, applications, selection charts, performance tables and installation steps. Remember, if you ever need more information about ITW Ramset/Red Head products, technology and service, contact your local distributor, or look on the back cover for a complete listing of ITW Ramset/Red Head facilities. We welcome your calls and feedback, and look forward to answering any questions you might have.

3 Table of Contents Anchoring Systems Fastening Applications Guide Electrical Contractor Applications Mechanical Contractor Applications Drywall Contractor and Carpenter Applications Acoustical Ceiling Installer Applications Steel Erector & Curtain Wall Applications Concrete and Masonry Contractor Applications Water &Waste Water Treatment Applications Highway and Bridge Contractor Applications General Contractor Applications Material Handing Applications Specialty Applications Anchoring Working Principles Red Head Adhesive Anchoring Systems Adhesive Anchoring Selection Guide A7 Adhesive C6 Adhesive NEW G5 Adhesive Umbrella Inserts and Stubby Screens Screen Tubes Maxima 7 Capsules Impact Capsules Accessories and Tool Repair Parts Trubolt LDT Dynabolt Dynabolt Stud Gold Redi-Drive Multi-Set Tapcon Nylon-Drive Red Head Mechanical Anchoring Systems Anchoring Selection Guide Trubolt Wedge Anchors Large Diameter Tapcon (LDT ) Anchors Multi-Set II Drop-in Anchors Dynabolt Gold Dynabolt Sleeve Anchors Stud Anchors Redi-Drive Anchors Tapcon Anchors E-Z Ancor Anchors Hammer-Set Anchors Nylon Drive Anchors Poly-Set Anchors Carbide Bits

4 New Products DYNABOLT GOLD SEE PAGE 78 Our new heavy duty sleeve anchor has a unique expansion sleeve designed to pull down uneven base plates with tremendous holding power. Stainless Steel Dynabolt Gold available December 2002 NEW G5 SEE PAGE 40 This new formulation combines the best attributes in one epoxy an extended working time (15 minutes) AND a fast cure time (2 hours). STAINLESS STEEL LDT SEE PAGE 68 The Large Diameter Tapcon (LDT ), the high performance anchor that cuts its own threads into concrete, is now available in 410 stainless steel. STAINLESS STEEL TAPCON SEE PAGE 92 Also available new this year is Tapcon, the original masonry anchor in 410 stainless steel. NYLON DRIVE ANCHORS SEE PAGE 101 These anchors, made from Polyamide 6.6, a highly durable nylon formulation, are a fast and removable solution for all types of masonry. Nylon Drive Anchors available November 2002

5 Fastening Applications Guide This section highlights a variety of trade applications and provides information that will assist you in selecting the best fastening system for your application. While these are not to be considered complete, they will give you an idea of how contractors use our products. For example, on the Electrical Contractor page, you will find applications, such as junction box/panel boards and suspended lighting. Next to the diagrams are the product name(s) and page number in this catalog where you will find complete information on these products needed for that particular application.

6 Electrical Contractor Applications Simple to install Drill hole, hammer Redi-Drive into hole Available in several head styles and lengths Junction Box/Panel Boards Conduit Clip Suspended Lighting Available in special 3/8" version for precast planks Available in sizes 1/4" to 3/4" internal thread diameters MULTI-SET Pg. 73 Transformers Switch Gear Electrical Enclosures Simple to install Drill hole, hammer Redi-Drive into hole Available in several head styles and lengths Used with rod coupler 1/4" to 1-1/4" diameters ICBO recognized for seismic zones Unistrut-Cable Tray/Conduit Pg. 73 MULTI-SET Available in special 3/8" version for precast planks Available in sizes 1/4" to 3/4" internal thread diameters Available in carbon, hot dipped galvanized, 304 and 316 stainless steel ICBO recognized for seismic zones Wall Mounted Lighting Pg. 78 DYNABOLT GOLD Suspended Pipe or Conduit Light Standards Poles PIPE DRIVE Single piece anchors (no couplers!) Drill hole, hammer in 1/4" and 3/8" internally threaded inserts style For use in concrete, brick or block Pg. 34 C6 ADHESIVE Stress Free anchor can be used close to edges or in close spacing pattern 4

7 Mechanical Contractor Applications LDT Vibration resistant 3/8" and 1/2" diameters Machinery and Equipment Pumps Simple to install drill hole and hammer in Fire resistant Ductwork/HVAC Pg. 34 C6 ADHESIVE Vibration resistant NSF Approved Pipe/Strut Attachment Pg. 73 MULTI-SET Available in special 3/8" version for prestressed concrete Available in 1/4" and 3/4" internal thread diameters PIPE DRIVE Heavy-Duty Pipe Support 1-piece design (no couplers!) Drill hole, hammer in 1/4" and 3/8" internal threads Pipe Support, Fire Sprinkler Pg. 34 C6 ADHESIVE High load capacity NSF Approved ICBO recognized for seismic zones Carbon, hot dipped galvanized, 304 and 316 stainless steel 1/4" to 1-1/4" diameters 5

8 Drywall Contractor & Carpenter Applications Drywall Track Window and Door Frames Ceiling Track Simple to use drill hole and hammer in Setting tool (RDST) available for tight spaces Floor Track DYNABOLT Pg. 82 Counter sunk and threshold head styles Work in concrete, block and brick Simple to use drill hole and hammer in Setting tool (RDST) available for tight spaces Framing Furring Strips Full threaded for maximum versatility ICBO recognized for seismic zones Metro-Dade Approved Other approvals on page 62 Framing LDT Ideal for fastening to concrete or block Simple to use drill hole and hammer in Setting tool (RDST) available for tight spaces Drill hole, drive in by hand or impact wrench ICBO recognized for seismic zones Available in 3/8" and 1/2" diameters 6

9 Acoustical Ceiling Installer Applications Single piece design Drill hole, hammer wedge into hole, pull down with claw hammer TIE WIRE WEDGE Simple to use drill hole and hammer in Single piece design Fewest steps of any system TIE DRIVE Redi-Drive used with angle clip Simple to use, drill hole and hammer in Acoustical Ceiling 7

10 Steel Erector & Curtain Wall Applications Hand Railings Steel Beams/ Columns Pg. 53 MAXIMA CAPSULES Protective Railings and Fencing High load capacity Ideal for closely spaced groups of anchors DYNABOLT Pg. 82 Multiple head styles Ideal for concrete, brick and block Carbon and stainless steel Ornamental Iron Stairs and Ladders Pg. 82 DYNABOLT DYNABOLT GOLD Ideal in concrete block Pg. 78 LDT For use in concrete Multiple head styles Ideal for concrete, brick and block Carbon and stainless steel Fully threaded for maximum versatility Available in carbon steel, hot dipped galvanized or stainless steel Curtain Wall LDT Support Angles and Ledgers Design allows for expansion and contraction of the frame Works in multiple base materials Fully threaded for maximum versatility Carbon steel, hot dipped galvanized or stainless steel available 8

11 Concrete & Masonry Contractor Applications Concrete Block Reinforcement Pg. 40 Fast curing adhesive ideal for moderate to hot climates NEW G5 ADHESIVE Rebar Doweling Fast curing adhesive ideal for moderate to cold climates Stone Attachment Brick Pinning Ledger Angle Attachment Compact space No-drip no sag formula Easy clean up Stone Attachment Fully threaded for maximum versatility Available in carbon, hot dipped galvanized and stainless steel Concrete Formwork Pg. 73 COIL THREAD DROP-IN ANCHOR Designed for 1/2" and 3/4" coil rods Ideal for 1-sided forming WITH UMBRELLA High load capacity in concrete block No drip no sag formula Easy clean up Fast curing adhesive for rebar doweling 9

12 Water & Waste Water Treatment Applications Weirs and Gates Bar Screens Instrumentation and Controls Pg. 34 C6 ADHESIVE NSF Approved Vibration resistant Covers and Domes Wear Strip Pg. 34 C6 ADHESIVE NSF Approved Vibration resistant Railings and Ladders Multiple head styles Heavy duty 360 hole contact 304 and 316 stainless steel C6 ADHESIVE NSF Approved Vibration resistant Special 3/8" version for prestressed concrete Available in 1/4" 3/4" internal diameters Stainless steel available MULTI-SET Pg. 73 Pg. 34 Pipe Supports PUMPS Conveyors Diffusers Fully threaded for maximum versatility Available in 304 and 316 stainless steel and galvanized Pg. 34 C6 ADHESIVE NSF Approved Vibration resistant 3/8" LDT Install by hand or with impact wrench Pg. 34 Multiple head styles Heavy duty 360 hole contact 304 and 316 stainless steel C6 ADHESIVE NSF Approved Vibration resistant Can be installed underwater 10

13 Highway & Bridge Contractor Applications Concrete Pavement Lane Addition and Joint Repair Fast dispensing, fast curing adhesive Works with epoxy coated dowels Pg. 73 J Bolt Tamper proof Simple to use 5/8" MULTI-SET Lipped anchor remains flush with face of concrete Down Spouts Carbon, hot dipped galvanized, 304 or 316 stainless steel Vibration resistant MAXIMA CAPSULES Pg. 53 Bridge Mounted Signs Suspended Conduit Adhesive Products Cartridges Capsules Wire Loops Rebar Doweling A7 C6 NEW G5 Impact Maxima 7 Fast curing Can be used in damp or water filled holes Fast curing Can be used in damp or water filled holes Mile Markers Glare Screens Tamper proof Simple to use Fast curing Temporary Fastening of Jersey Barriers to Concrete Impact resistant Ideal for use in bolt pattern MAXIMA CAPSULES Guard Rail Attachments to Bridges Steel Guard Rail Post Attachment to Concrete Department of Transportation Approvals & Listings Some states do not maintain an approval list for adhesive anchoring systems. For approvals contact local engineering on a per project basis. For the most current D.O.T. approval information contact our Technical Services Department at Pg. 53 MAXIMA CAPSULES Impact resistant Ideal for use in bolt pattern Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington West Virginia Wisconsin Wyoming Port Authority of NY & NJ West Palm Beach Pg

14 General Contractor Applications Pg. 40 NEW G5 ADHESIVE Replacement of Misplaced Anchors Ideal for hot climates extended working time formula REPLACE WITH 1/2" LDT ICBO recognized for seismic zones 1/2" and 3/8" diameters available Cast-In-Place Bolt in Wrong Location Can be used in 1/16" oversized or 1/8" oversized holes ICBO recognized for seismic zones Tilt Wall Anchorage Pg. 40 NEW G5 ADHESIVE Extended working time ideal for warm to hot climates Available in 3/4" x 7" Drill hole deeper than anchor length, pound into hole after use Seismic Hold Downs Can be used in 1/16" oversized or 1/8" oversized holes ICBO recognized for seismic zones Damaged Cast- In-Place Anchor Pg. 40 NEW G5 ADHESIVE Extended working time ideal for warm to hot climates Replacement of Damaged Anchors Can be used in 1/16" oversized or 1/8" oversized holes ICBO recognized for seismic zones 12

15 Material Handling Applications Overhead Doors 3/8" LDT Hand installation block or concrete Shelving Pg. 78 5/8" DYNABOLT GOLD WITH UMBRELLA High load in hollow block or concrete Easy to install Single piece design LDT Rails Conveyors 3/8" LDT LDT Installs with impact wrench Pg. 78 3/8" DYNABOLT GOLD Installs with impact wrench Single piece design Dock Bumpers Fast curing Impact resistant Non-sag formula Racks LDT 3/8" to 5/8" diameters 1/2" DYNABOLT Pg. 82 1/2" LDT Installs with impact wrench Single piece design 13

16 Specialty Applications Stadium Seating Normal weight or lightweight concrete Used in major stadiums across the country Immediate loading Normal weight or lightweight concrete Used in major stadiums across the country Basement Wrap Expansion Joints Pg. 40 NEW G5 ADHESIVE LDT Installs by hand or with impact wrench Simple to use drill hole and hammer in Large diameter head securely fastens basement wrap High load capacity Suitable for use close to edge of slab Underwater Installation Flooring Systems ICBO recognized for seismic zones Simple to use drill hole and hammer in Setting tool available for tight locations For installation guidelines for your application, please contact our Technical Services Department at