Due to a depreciating Aussie dollar and increase in local steel prices our pricing will change on October 1 st.

Transcription

1 The Allrounder

2 Due to a depreciating Aussie dollar and increase in local steel prices our pricing will change on October 1 st. Cabin Specifications: Price: $8,450 including GST for the basic kit. $8,990 from October 1 st. Built size: 5.85m x 3.25 Height 2.71/2.27 = 19m2 Flat packed: 5.85m x 2.25m. Height 650mm. Wind rating: N2 Building type: Class 1 (permanent habitable) Building timeframe: 3-4 days including foundation with 3 people. Ease of build: All the cabins from the Allrounder series are engineered to be quick and easy to install. General build info: Full engineering drawings provided on purchase and site-specific services available for building approvals. These kits can be built DIY or talk to us about other build options. Manufacturing info: The cabins are Australian engineered and come factory direct from China. The foundations are Australian made from either Hot dipped galvanised or DuraGal. All products strictly comply with Australian standards and include a replacement guarantee.

3 House Materials: * Steel frame base * Plywood floor * External walls: Steel sandwich panel with 75mm EPS insulation. White paint finish. * Roof: Steel sandwich panel with corrugated roofing + 75mm EPS insulation. White paint finish. * Internal walls: Steel sandwich panel with 50mm EPS insulation. White paint finish. * Doors: Aluminium with EPS foam * Windows: Aluminium frame with Australian standard glass * All building screws and bolts included * Waterproofing and guttering included for gables Optional extras: * Internal walls = $400 $500 from October 1 st Use of one our pre-existing plans (1 or 2 bedroom) or design your own. Send us your ideas and we can design it for you. * PVC Floor finish (lino) = $300 $400 from October 1 st

4 * Kitchen bench (Includes mixer) = $950 $1200 from October 1 st * Bathroom pack = $600 (includes glass shower room, base, taps and shower head + toilet and wash basin) $700 from October 1 st

5 * Deck & Veranda = $1750 $1990 from October 1 st * Guttering and downpipe = $450 $600 from October 1 st * Customised steel foundation = $2400 $2990 from October 1st * Shipping from $300. Contact us for an exact quote on delivery

6 Build Process The Allrounder is built on steel piers and can be built either DIY or for you using our network of registered builders. Depending on your location and zoning different rules will apply depending on your intended usage for the cabin. If you wish to build it as a house or granny flat, you will need to lodge an application with council (TCW can help with this). There are a few things you will need organise to gain approval, these include: * Waste water report. You will need a special report done for council to show how you will manage your waste water. Allowances will need to be made for new connections or septic systems. Estimates cost $750+ * Electrical connections. Electrical costs will vary depending on your requirements. If you are building a granny flat (secondary dwelling) you may be able to run the power off the main house. It will be more expensive if a switch board upgrade or new connection is required. * Site survey and Geotechnical report. This includes a site map showing the slope of your site and a soil test. These are general build requirements that are reasonable straight forward to arrange. Estimated cost $1300 * Engineering footings + structural sign off. Another general build requirement; all building work needs to be signed off by a structural engineer. All TCW cabins include structural engineering already in the price. You will still need site specific sign off for your foundation though. TCW can arrange this for $1000 for standard projects.

7 * Private certifier fees. You will likely need to engage a private certifier to obtain approval for your project. Some offer additional services and can help streamline and simplify the application process. We have a few preferred providers so talk to us if we can help in your local area. Estimated cost $900+ * Council fees. This varies depending on area and build type. We advise talking to your local council as a first step, they can generally explain their fee structure first hand and can also advise on any local specific build requirements. Once you have approval the build process can begin. Step 1 Deliver and set footings in concrete. The footings consist of rows of piers with a beam on top welded together. Step 2 - Once the foundation is set the cabin flat packs can be delivered and dropped directly onto the foundation (if there is vehicle access, otherwise some form of machine lift will be required). Step 3 The cabin can be built directly on top of the foundation. Build Options The Allrounder can be built DIY or we can do it for you. We offer 2 main build options and can customise our service to meet your needs. We can take care of everything for you, including building approvals. Our team of fully registered tradesman will then complete the build for you. 1 - Owner Builder This is a good option if you want to reduce the costs of your project by building the cabin yourself. It requires obtainment of your construction white card and owner builder permit (can be done online for around $150 each). You have the option to project manage it yourself or we can assist

8 with free service and possible build assistance. The Allrounder series in particular is well suited to DIY and has been engineered for home install. The Luxury series is a step up with more pieces and a higher roof but can still be built by more experienced DIY ers. 2 - Full Build We offer building services for a complete build of your cabin using our network of registered builders. All builders are fully insured and licensed and will build your cabin as a permanent habitable structure (class 1a). Total build of Allrounder and foundation: $10,500 including GST + concrete These figures are based on the away rates of our Gold Coast builders. Discounts may apply for local or multi builds. The total build price includes: Builders wages Builders insurance Builders 7-year Guarantee Builder accommodation and travel time Administration costs Electrical and plumbing quoted on a site by site basis. Contact us today to organise a detailed plumbing and electrical quote based on your site-specific requirements.

9 A x 65 x 3.0 SHS bearer typically UNO x 65 x 3.0 SHS column typically UNO. SHS HDG steel column cast into unreinforced bored pile. Steel post to be HDG with Durebild STE from 70mm below the finished concrete surface. min 50 Uncontrolled fill. Approximate depth 600mm. Socket all isolated piles 500mm min. into founding material. Refer general notes F5. Min pile depth 1200mm 100 square 6mm thick base plate welded to steel post Detail 1 / - (Option 2) Typical bored pile to substructure connection detail A3

10 A3 Steel base structure to be unfolded and fixed in place by hinge connection detail on S6. 1 Folded Cabin Base Structure (Axonometric) not to scale

11 A3 Refer to detail 6 for wall panel corner detail. 24 Refer to detail 6 for wall panel corner detail. 5 Remaining Gable Wall Connection not to scale x 13mm rivet connecting 75mm thick sandwich panel to 35 x 35 x 1.0 aluminium angle at 300 crs. Outer edge flashing. 4.0 x 13mm rivet at 300 crs connecting flashing to external panel. 75mm thick composite insulated sandwich panels. 38 Detail 6 / - Typical external wall panel corner connection detail A3

12 A3 10 S14 Roof Beam Connection not to scale x 50 x 2.0mm C shape steel purlin. 5.5 x 32mm self drilling screws connecting steel purlin to external composite panel gable walls. 5.5 x 32mm self drilling screws x 30 x 2.0mm connecting steel purlin to external transverse roof beam. composite panel gable walls mm thick composite insulated sandwich panels. 75mm thick composite insulated sandwich panels. Detail 8 / - C shape purlin to external gable wall connection detail. A3 Detail 9 / - Transverse roof beam to external panel connection detail. A3

13 A degree fall. Flashing installed as per detail 10 on S14. Gable edge flashing installed as per detail 12 on S15. Install outside edge flashing using 4.0 x 13mm rivet at 300 crs. Refer to detail 10 on S14. Roof Edge Flashing Connection not to scale Detail 9 / - Transverse roof beam to external panel connection detail. A3 4.0 x 13mm rivet at 300 crs connecting 0.5mm flashing to 50mm composite insulated sandwich roof panel.

14

15

16

17

18