EXTRUDED ALUMINUM ώά ώά ώά ώά ώά ώά ώά ώά

Transcription

1 EXTRUDED ALUMINUM

2 A comprehensive line of etruded aluminum products for drwall, plaster and stucco applications. These products are designed so that the can be curved for installation. Gives ou more options to create arched decorative reveals and more! NEW 58

3 Drwall version of the plaster channel screed used to create a decorative reveal & to separate dissimilar materials. Used with one-coat stucco and direct applied sstems. Available with 1/8 weep holes. KEY PLASTER/ STUCCO CONCRETE PLYWOOD WOOD FOAM 10 1/ 1/ * Weep *Not available with a Y sie. A two-piece version of the DCS series molding that provides 1/ +/- movement where a true epansion joint is required. Used for stucco over block or when onl a 1/ depth is required. 10 1/ 1/ 1/ A 90 outside corner with taping flanges for drwall. Provides a high strength corner for high impact areas. Includes ke holes for proper plaster adhesion. Ke 10 3/8 7/8 Ke 60

4 WATERPROOF MEMBRANE SHEATHING DRYWALL DRYWALL MUD SUBSTRATE A reveal molding with taping flanges that provides a decorative reveal in drwall. This molding is installed after the drwall board, greatl improving installation ease and time. Includes ke holes for proper plaster adhesion. EXTRUDED ALUMINUM 10 1/ 1/8 7/8 1/ 1/ 3/8 1/ Ke Ke Z stle with a taping flange that provides a reveal and a termination point for drwall. Includes ke holes for proper plaster adhesion. 10 7/8 2 1/ 3 1/ Ke F stle with a taping flange that creates a reveal and board termination point at tops and bases of walls and at door and window frames. Includes ke holes for proper plaster adhesion. 10 1/ 1/8 7/8 1/ 1/ 3/8 1/ Ke 61

5 L stle drwall molding with a taping flange that provides a drwall termination point b capping of the raw edge of the drwall board. Includes ke holes for proper plaster adhesion. KEY PLASTER/ STUCCO CONCRETE PLYWOOD WOOD FOAM 10 1/ 7/8 Ke W stle drwall molding with taping flanges that creates an inverted corner for setbacks, stepdowns and other special drwall conditions. Includes ke holes for proper plaster adhesion. Ke Z stle with a taping flange that provides a reveal and a termination point for drwall at door frames, windows and wall bases. Includes ke holes for proper plaster adhesion. 10 1/ 7/8 Ke 10 1/ 1/8 7/8 1/ 1/ 3/8 1/ Ke 62

6 WATERPROOF MEMBRANE SHEATHING DRYWALL DRYWALL MUD SUBSTRATE W stle drwall molding with taping flange that creates a reveal at a wall/drwall ceiling condition. Includes ke holes for proper plaster adhesion. EXTRUDED ALUMINUM Ke 10 An aestheticall pleasing drip screed for conventional 3-coat stucco that functions as a plaster stop/drip edge and creates a reveal at the fascia/soffit corner condition. 10 7/8 7/8 * * not available vented. An aestheticall pleasing drip screed for conventional 3-coat stucco that functions as a plaster stop/drip edge and creates a reveal at the fascia/soffit corner condition. 10 7/8 63

7 A 2-piece plaster control screed that permits movement in a plaster soffit/wall condition. KEY PLASTER/ STUCCO CONCRETE PLYWOOD WOOD FOAM 10 Provides a plaster stop/drip molding with an aesthetic reveal for window heads, tops of door frames and plate conditions where a drip edge is required. Available with 1/8 weep holes. Weep 10 A plaster stop for fascia/soffit corner conditions that provides a reveal on the soffit portion. 10 7/

8 WATERPROOF BARRIER WALL SHEATHING DRYWALL DRYWALL MUD FIBER CEMENT FDM: F Drwall Molding Available With 1/8 or No Vents A drwall stop/control screed for drwall, used at the top or base of columns, the top of walls at the ceiling, or at the base to create a reveal. Also used at the top of windows to permit the continuation of a horiontal reveal at the window line. Available with 1/8 weep holes. EXTRUDED ALUMINUM Length X Sie Y Sie 10 1/ **1/ * *Not available with a Y sie. **Ava ilable on 1/ reveal. Weep Without Weep FPM: F Plaster Molding Available With 1/8 or No Vents A plaster stop/control screed for conventional 3-coat stucco, used at the top or base of columns, the top of walls at the ceiling, or at the base to create a reveal. Also used at the top of windows to permit the continuation of a horiontal reveal at the window line. Available with 1/8 weep holes. Without Weep Length X Sie Y Sie 10 1/ 2 1/ Weep FRWDM: Facia/Recessed Window Drip Molding A plaster stop for fascia/soffit corner conditions that provides a 3 1/8 reveal leg with a drip edge for recessed window conditions where a drip edge is required. Can be also be used when a caulking leg is required for backer rod and sealant. NEW Length X Sie Y Sie /8 7/8 WINDOW 1-87-STOCKTON 65

9 A plaster stop for fascia/soffit corner conditions that provides a 3 1/8 reveal leg for recessed windows. Can be used when a caulking leg is required for backer rod and sealant. KEY PLASTER/ STUCCO CONCRETE PLYWOOD WOOD FOAM NEW /8 7/8 A drwall version of the J molding. Gives a nice finished look to drwall terminations. 10 1/ 1 1/8 A plaster stop/casing bead for conventional 3-coat stucco used in a variet of conditions that gives a nice finished look at all plaster terminations /8 1 3/8 66